Professional Documents
Culture Documents
ASTM 333/A 333M covers nominal (average) wall seamless and welded carbon and alloy steel pipe
intended for use at low temperatures.
ASTM 333/A 333M covers several grades of carbon and alloy steel seamless and welded pipes
included Grade1, Grade3, Grade4, Grade6, Grade7, Grade8, Grade9, Grade10, Grade11.
ASTM 333/A 333M pipe shall be made by the seamless or welding process with the addition of no
filler metal in the welding operation. Grade 4 shall be made by the seamless process.
Description Name: ASTM A333 GR.6 Seamless pipes, A333 GR.6 tubes, A333 GR.8 Seamless pipes,
Temperature Pipes.docx
CTSTUBES
Professional Pipeline Supplier
Size: 21.3mm-406mm
Schedule: 2mm-60mm
Length: Single random length/ Double random length or as customer’s actual request
Condition: The purchaser shall specify a sizing method and, if required, a thermal treatment.
⚫ Sizing Methods:
HF-Hot Finished,
CW-Cold worked,
A333/A
Chemical Components (%)
333M
Grade C Si Mn P S Ni
Tensile strength,
55000 380 60000 415 100000 690
min
Yield strength,
30000 205 35000 240 75000 515
min
Temperature Pipes.docx
CTSTUBES
Professional Pipeline Supplier
Impact requirements for Gr.1, Gr.6
Specimen Width Along Notch or Actual Material Thickness Temperature Reduction, Degrees Colder A
in. mm °F °C
0.394 10 (Standard size) 0 0
0.354 9 0 0
0.315 8 0 0
0.295 7.5 (3/4 std. size) 5 3
0.276 7 8 4
0.262 6.67 (2/3 std. size) 10 5
0.236 6 15 8
Temperature Pipes.docx
CTSTUBES
Professional Pipeline Supplier
Hydrostatic or Nondestructive Electric Test
⚫ ASTM A333 GR.1, GR.6, GR.8 pipe shall be subjected to the nondestructive electric test or the
hydrostatic test. The type of test to be used shall be at the option of the manufacturer, unless
otherwise specified in the purchase order.
⚫ The hydrostatic test shall be in accordance with Specification A 999/A 999M
⚫ Nondestructive Electric Test—Nondestructive electric tests shall be in accordance with
Specification A 999/A 999M
Product Marking
⚫ ASTM A333 tubes marking shall include whether hot finished, cold drawn, seamless or welded,
the schedule number and the letters “LT” followed by the temperature at which the impact
tests were made, except when a lower test temperature is required because of reduced
specimen size, in which case, the higher impact test temperature applicable to a full-size
specimen should be marked.
⚫ When the size of the finished pipe is insufficient to obtain sub size impact specimens, the
marking shall not include the letters “LT” followed by an indicated test temperature unless
Supplementary Requirement S1 is specified.
⚫ When the pipe is furnished in the quenched and tempered condition, the marking shall include
the letters “QT,” and the heat treatment condition shall be reported to the purchaser or his
representative.
Temperature Pipes.docx
CTSTUBES
Professional Pipeline Supplier
⚫ Packed in bundles, wrapped in plastic, and suitably protected for sea-worthily delivery or as
requested.
Related products
⚫ Carbon steel
⚫ ASTM A179 / ASME SA179 Seamless tubes
Temperature Pipes.docx
CTSTUBES
Professional Pipeline Supplier
⚫ ASTM A192 / ASME SA192 Seamless boiler tubes
⚫ ASTM A210 / ASME SA210 GRADE A1 Seamless tubes
⚫ ASTM A210 / ASME SA210 GRADE C Seamless tubes
⚫ Alloy steel
⚫ ASTM A213 T11 T12 T22 Seamless alloy tubes
⚫ ASTM A 213/A 213M T2, T5, T5b, T9, T91 Seamless Alloy Steel tubes
⚫ ASTM A335 P1, P2, P5, P9 Seamless alloy pipes
⚫ ASTM A335 P11, P12, P22, P91 seamless alloy pipes
⚫ ASTM A209 ASME SA209 T1 tubes
Temperature Pipes.docx
CTSTUBES
Professional Pipeline Supplier
Get in Touch
If you are interested in our products or cooperation with us, even having a
comment or a suggestion, please contact us now for more detailed information.
Temperature Pipes.docx