Professional Documents
Culture Documents
The connecting cables are used for troubleshooting purposes at the control units listed
above and their peripherals. They are equipped with gold-plated contacts in the mating
area and designed for a voltage range of up to 40 volts.
Protect the connecting cables from moisture and dust.
When performing the various measurements, always make sure to prevent short-circuits,
as these would, without fail, cause irreparable damage to the test box and control unit.
Any improper use, destruction due to short circuit or mechanical damage shall void the
warranty.
No liability is accepted for damage to the connecting cable or test equipment caused by
mechanical modifications or any consequential damage whatsoever that can be attributed
to a mechanical modification or the incorrect use of connecting cables or the test
equipment.
en. -1-
Ordering instructions
Orders for the following connecting cables should be sent, specifying the Cartool order
number for each product, directly to:
97 0 062 97 0 061
97 0 067
en. -2-