Professional Documents
Culture Documents
0 (2022-02)
NOTE 1: CLA coding related to transmission oriented APDUs applying to commands not listed in table 10.5
(e.g. GlobalPlatform) falls outside of the scope of the present document.
NOTE 2: The ambiguity related to the INS values '78' and '7A' can be avoided if the GlobalPlatform secure channel
which may use these commands is only opened on a logical channel different from the basic channel.
Le set to '00' indicates that the terminal expects to receive at most the maximum number of bytes, i.e. 256, in the
response APDU. The UICC may return any number of bytes in the range 1 to 256.
ETSI
80 ETSI TS 102 221 V17.1.0 (2022-02)
10.2.1.0 Introduction
Status of the card after processing of the command is coded in the status bytes SW1 and SW2. Clauses 10.2.1.1 to
10.2.1.6 specify the coding of the status bytes.
10.2.1.3 Warnings
Table 10.9: Status byte coding - warnings
ETSI
81 ETSI TS 102 221 V17.1.0 (2022-02)
ETSI
82 ETSI TS 102 221 V17.1.0 (2022-02)
ETSI