The document refers to sections in Chapter 6 of the book "Power Plant Engineering" by P K NAG for explanations of Figure 6.17 on pages 344 to 346 about circulation ratio and pressure drop in downcomers, Article 6.3.3, and Article 6.3.4 up to equation 6.21 which includes formulas for circulation ratio, pressure drop, mass flow rate, and heat transfer rate.
The document refers to sections in Chapter 6 of the book "Power Plant Engineering" by P K NAG for explanations of Figure 6.17 on pages 344 to 346 about circulation ratio and pressure drop in downcomers, Article 6.3.3, and Article 6.3.4 up to equation 6.21 which includes formulas for circulation ratio, pressure drop, mass flow rate, and heat transfer rate.
The document refers to sections in Chapter 6 of the book "Power Plant Engineering" by P K NAG for explanations of Figure 6.17 on pages 344 to 346 about circulation ratio and pressure drop in downcomers, Article 6.3.3, and Article 6.3.4 up to equation 6.21 which includes formulas for circulation ratio, pressure drop, mass flow rate, and heat transfer rate.
following articles 1) Figure 6.17 and related explanation of Fig. 6.17, refer page number (344, 345, 346)
2) Article: 6.3.3,
3) Article 6.3.4 (upto equation 6.21),
Figure 6.17 and related explanation of Fig. 6.17, refer page number (344, 345, 346) Article: 6.3.3 Article: 6.3.4 {1} CR = (m/mg) = (mg + ml) / mg CR = 1 / (mg /[mg+ml]) = 1 / TDF {2} Pressure drop in down comer is inversely proportional to its diameter.