Professional Documents
Culture Documents
MP3/MP6
Digital Multi Panelmeter ▍Wiring Diagram ▍Dimension & Panel cutout Unit:mm ▍Performance
■ MP3-4-DV-⃞-A/B ( 96 x 48 ) ● Acrylic type W ● Plate type L Input Signal
DC Voltage/Current,
AC Voltage/Current
W L
A / D conversion method ∑ - ⊿ System
HANYOUNGNUX CO.,LTD
W L Sampling Cycle
DC TYPE : 100 ㎳,
AC TYPE : 300 ㎳
INSTRUCTION MANUAL 28, Gilpa-ro 71beon-gil,
W H L H2 Max. Displayable Digits -1999~9999 ( 4 digits )
Michuhol-gu, Incheon, Korea
m
Thank you for purchasing Hanyoung Nux products. Please read the instruction TEL : +82-32-876-4697
http://www.hynux.com Scaling Function Display function of converting to a value from measured and inputted Max./ Min.value
H H H2
manual carefully before using this product, and use the product correctly.
Also, please keep this instruction manual where you can view it any time. Hold Function
H2
Max/Min, Hold a value of detecting an automatic “ peak”
H H2
MF0101KE181116
D1 D D2
External Control Hold a displayed value
co
■ MP3-4-DA-⃞-A/B
▍Safety information ˙Remote/Local Conversion(Communication Output type)
˙Conversion of setting for Comparative Output
Please read the safety information carefully before the use, and use the product correctly. ˙Display Max/Min value by front panel key
D1 D D2
Other Functions
The alerts declared in the manual are classified into Danger, Warning and Caution according to their importance ˙Auto zero function by front panel key
W W L D1 D D2
˙Protection function from changing a setting value
D1 L D D2 ˙Average processing/displayed cycle delay function
u.
DANGER Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury
W1
˙Relay Output (contact point : 3 outputs)
WARNING Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury ˙BCD Output(Static, Dynamic)
˙Transistor Output (NPN,PNP)
W L
CAUTION Indicates a potentially hazardous situation which, if not avoided, may result in minor injury or properties damage Types of Output ( Option )
˙Current Output (4 - 20 mA)
W L
• Make sure that there is no damage or abnormality of the product
DANGER
H
˙Communication Output (RS485)
H H2 H1H2
ia
during delivery. ˙Low speed serial output
• The input/output terminals are subject to electric shock risk. • Do not use this product at any place with corrosive (especially
■ MP3-4-AV-⃞-A/B
▍Auxiliary output (MP3 only)
Never let the input/output terminals come in contact with your noxious gas or ammonia) or flammable gas.
BH
body or conductive substances. • Do not use this product at any place with direct vibration or impact.
H2
• Do not use this product at any place with liquid, oil, medical
WARNING ha substances, dust, salt or iron contents. (Use at Pollution level 1 or 2)
• Do not polish this product with substances such as alcohol or benzene. H H2
• This product does not contain an electric switch or fuse, so the
user needs to install a separate electric switch or fuse externally. • Do not use this product at any place with a large inductive
difficulty or occurring static electricity or magnetic noise.
D1 D D2 D1 D D2
(Fuse rating: 250V 0.5A)
W1
• To prevent defection or malfunction of this product, supply • Do not use this product at any place with possible thermal
proper power voltage in accordance with the rating. accumulation due to direct sunlight or heat radiation.
D1 D1 DD D2
• Install this product at place under 2,000m in altitude.
en
• To prevent electric shock or malfunction of product, do not
D2
Acrylic type Plate type
W L
• When the product gets wet, the inspection is essential because
A
supply the power until the wiring is completed. Division Display
W1 W1 H1
• Since this product is not designed with explosion-protective there is a danger of electric leakage or fire. MP3 MP6 MP3 MP6
structure, do not use it any place with flammable or explosive gas. • If there is excessive noise from the power supply, using insulating
• Do not decompose, modify, revise or repair this product. This transformer or noise filter is recommended. The noise filter must ■ MP3-4-AA-⃞-A/B W 96 72 96 72
Output
B
may be a cause of malfunction, electric shock or fire. be attached to a panel which is already connected to a ground and
H 48 36 48 36 electric current
the wire between the filter output and power supply terminal BCD Dynamic BCD Static Low-speed serial RS-485
W
• Reassemble this product while the power is OFF. Otherwise, it
H1H2
H1 L
di
H
onto a panel while an electric current is applied.
A H2
switch approved with IEC947-1 or IEC947-3. L 102 100 107.6 100.5 3 POL TX+
CAUTION • Install the circuit breaker or switch at near place for convenient use.
D1 D D2
• Write down on a label that if the circuit breaker or switch is W1 92.2 67.0 92.2 67.0 4 8 X 103 TX-
• The contents of this manual may be changed without prior operating then the power will be disconnected since the circuit H1 45.2 32.1 45.2 32.1 5 8 X 101
W1
notification.
■ MP6-4-DV-⃞-A/B ( 72 x 36 ) A
breaker or switch is installed. Panel board
AW L
• Before using the product you purchased, make sure that it is • For the continuous and safe use of this product, the periodical A 130 96.5 130 96.5 6 4 X 103
exactly what you ordered. maintenance is recommended.
D1 D 2 X 10 D2
B 60 57 60 57 7 4 X 101
▍Suffix Code
• Some parts of this product have limited life span, and others are
H1 ▍Main Output W
changed by their usage. 8 3
■ MP3
• The warranty period for this product including parts is one year if
L 9 2 X 101
this product is properly used.
W
■ MP3-4-⃞⃞-0-A H ■ MP3-4-⃞⃞-1-A L H2
B
10 DOT 1 X 10
W
3
L1 X 10
Model Code Description
11 POL 1
-
MP3- ⃞ ⃞ ⃞ ⃞ ⃞ Digital Multi Panelmeter 96(W) X 48(H) ㎜ ● Relay Output, 4 - 20 ㎃ Current Output ● Relay Output
H
12 D0 8 X 102 +
H2
Displayable Digit 4 4 digits ( 9999 )
H
DV DC VOLT 13 D1 8 X 101
DA DC AMPERE
D1 D D2 H2 14 D2 4 X 102
H H2
AV AC VOLT
■ MP6-4-DA-⃞-A/B
Input Speciication 15 D3 4 X 101
AA AC AMPERE
AVR AC VOLT ( RMS ) A D1 D D2
16 A0 2 X 102 POL
AAR AC AMPERE ( RMS ) W L 17 A1 2 X 101 LATCH
N Display only D1 D D2 18 A2 1 X 102 DATA
W L
0 Relay Output ( HI, GO, LO ), Current Output ( 4 - 20 ㎃ )
1 Relay Output ( HI, GO, LO ) W L
■ MP3-4-⃞⃞-11-A ■ MP3-4-⃞⃞-0-B
19
D1B-COM
A3
D
1 X 101
D2 S-COM
CK
H H2
20 GND
W L
2 NPN Open Collector ( HI, GO, LO ), BCD Output ( Dynamic )
Output (Option)
4 NPN Open Collector ( HI, GO, LO ), Current Output ( 4 - 20 ㎃ ) ● Relay Output, RS-485 Output
W1
● Relay Output, 4 - 20 ㎃ Current Output
※ When auxiliary output is used, Hirose socket is excluded HIF3BA-20DA-2.54R Purchase for use.
H H2
5 PNP Open Collector ( HI, GO, LO ), Current Output ( 4 - 20 ㎃ )
8 NPN Open Collector ( HI, GO, LO ), RS485 Output
H H2 ■ TR ( PNP ) Output ■ TR ( NPN ) Output
H1 H2● Hirose 20P Flot Connector
9 PNP Open Collector ( HI, GO, LO ), RS485 Output
10 BCD Output(Static)
■ MP6-4-AV-⃞-A/B H D1 D D2
● Hirose 20P Flot Connector
B
11 Relay Output ( HI, GO, LO ), RS485 Front
A Front : Acrylic type ( 100 - 240 V a.c. )
W1 D1 D D2
D1 D D2
Front panel type B Front : Plate type ( 100 - 240 V a.c. )
C Front : Plate type ( 24 V d.c. ) W1
■ MP6 H1 D1 D D2
■ MP3-4-⃞⃞-1-B ■ MP3-4-⃞⃞-11-B
W B● Relay Output L W1 H1
A
Model Code Description
MP6- ⃞ ⃞ ⃞ ⃞ ⃞ Digital Multi Panelmeter 72(W) X 36(H) ㎜ ● Relay Output, RS-485 Output
Displayable Digit 4 4 digits ( 9999 ) B
DV DC VOLTAGE
H1 ▍Measuring Input Specification
H H2
DA DC AMPERE
AV AC VOLTAGE
B A
■ MP6-4-AA-⃞-A/B
Input Speciication Max. Measuring Standard Input Max. Scale
AA AC AMPERE
A
TYPE MODE Accuracy
Range Display Range Impedance Display Range
AVR AC VOLTAGE ( RMS )
AAR AC AMPERE ( RMS ) 50 ㎷ 0 ~ 50.00 2㏀
D1 D D2
N Display only
5V 0 ~ 5.000 100 ㏀
A
0 Relay Output ( HI, GO, LO ), Current Output ( 4 - 20 ㎃ )
Output (Option)
1
4
Relay Output ( HI, GO, LO )
NPN Open Collector ( HI, GO, LO ), Current Output ( 4 - 20 ㎃ )
W1 DC
Voltage
10 V 0 ~ 10.00 1㏁ Max ±2 Digit
▍Specifications
-19.99 ~ 19.99
20 ㎃ 4 ~ 20.00 1Ω
A
-199.9 ~ 199.9
DC
100 - 240 V a.c 50 / 60 Hz allowable operating voltage range : ±10 % Max ±2 Digit
Power Supply Current
24 V d.c. allowable operating voltage range ±10 % 50 ㎃ 0 ~ 50.00 1Ω -1999 ~ 9999
Power Consumption 5 V A ( 100 - 240 V a.c .), 5 W ( 24 V d.c. )
500 ㎃ 0 ~ 500.0 0.1 Ω The display
Display 7 Segment LED Disply range will be
Insulation Resistance 100 ㏁ min. ( at 500 V d.c. ) between external terminal and case varied with the
5A 0 ~ 5.000 0.01 Ω
Dielectric Strength 2000 V a.c. min 1 Min between external terminal and case ■ MP6-4-⃞⃞-0-B ■ MP6-4-⃞⃞-1-B setting of decimal
Noise Immunity By noise simulator, square-shaped wave noise, pulse width 1㎲, ±1000 V 5V 0 ~ 5.000 100 ㏀ point position.
※ C type : 24 V DC power supply. Pin arrangements are same as other models.
Malfunction 50 / 60 ㎐, Single amplitude 0.5 ㎜, X˙Y˙Z each direction for 1 hour ● Relay Output, 4 - 20 ㎃ Current Output ● Relay Output
Vibration Resistance ※ Attention : When you use MP6 optional product (except only display product), terminal 5 and 13 (B Type is number 12) AC
Durability 50 / 60 ㎐, Single amplitude 0.5 ㎜, X˙Y˙Z each direction for 2 hours are shorted internally so you need to draw attention. 50 V 0 ~ 50.00 1㏁ Max ±5 Digit
Voltage
Malfunction 100 for 3 times each in X˙Y˙Z
Shock Resistance
Durability 300 for 3 times each in X˙Y˙Z MP3 MP6 500 V 0 ~ 500.0 10 ㏁
DC power supply
Operating Ambient temperature -10 ~ 55℃ ( with no freezing ) N 0 1 N 0 1
Operating Ambient Humidity Relative Humidity 35 ~ 85% RH 50 ㎃ 0 ~ 50.00 1Ω
DV ● ● ● ● - -
Operating Circumstance With no corrosive gas AC
DA ● ● - ● ● - 500 ㎃ 0 ~ 500.0 0.1 Ω Max ±5 Digit
Storage Ambient Temperature -20 ~ 65℃ ( with no freezing ) Current
Relay Life Expectancy Input Signal Mechanical : 20,000,000 ㎰ Min, Electrical : 100,000 ㎰ Min AV ● ● - ● - ●
5A 0 ~ 5.000 0.01 Ω
Weight MP3 : Approx 218.36 g , MP6 : Approx 148.70 g AA ● - - ● - -
Display value
m
Input sequence
Setting
Change setting
설정값 : 설정값 : Setting 설정값 변경
설정
value :
시작 value :
Set value
Scale setup tr 9.9 ㎳ ( minimum )
Input signal Dispaly value start
Ex) When the set number is 0, the number is flickering with only 0th digit. To change 100th digit, press key for 3 times. Each time
PARAMETER you press The digit moves to the left, and the value of the selected digit flashes. When setup is complete Press Key to enter
0 0 0 ~ 10.00 ( default value is displayed )
co
1 parameter mode. At this time, the parameter and setting value are repeatedly blinked. To return to RUN mode t 20 ㎳ ( minimum )
0 1800 0 ~ 1800 press Key to return to RUN mode. Display value
RUN
Input value 2 : 10 V Choose a measuring range of an input speciication
u.
5000 - 1000 5000 ~ - 1000 In RUN mode, press key for 2 seconds or
more to enter LOCK setting mode.
1000 6000 1000 ~ 6000
ia
EXIT
Initial setting
Instrument input Set
value :
Move the number of digits
- - - - 4 - 20 mA d.c. Input 200 0 200 ~ 0
Correct an error by adding/subtracting to an input measured value. start
Input value 1 : 4 mA - 1000 200 - 1000 ~ 200 Ex) If you want to display 5000 but the measured value is 5010, then Ldp set -10 in parameter. The displayed
PARAMETER Input value 2 : 20 mA value will be 5000. Default =0 ※ All parameters can not be set when is set
2 200 - 1000 200 ~ - 1000
ha ※ Built scale function, which can convert input signals into other values is available.
※ Rising, reversing and + ~ ━ display can be adjusted freely.
▍Parameter 2
It is diicult to measure an accurate value in a place of where an input measured value is varying too much.
In this event, it is possible to display it as an averaged value by changing the cycle of the setting value.
Ex) If set 2.0 in parameter then it will be displayed an averaged value for every 2 seconds after taking the values
for 2 seconds. Default=0.2 Sec.
In an event of detecting max/min value, there is a possibility of detecting an erroneous value by an efect of the
▍How to Set Slope
If you want to display 3600(min -1999 ~ 9999) then the model specification should be MP3-4-
DV-X and an input should be 10V. The way of changing the parameter setting is written 표시값 the
Display value
initial overvoltage and overcurrent. To prevent this matter, set delay time of detecting. below (Follow the steps 1 ~ 4). 표시값
표시값
3600
※ and only appears in the communication type
en
3600
Display Meaning Initial Setting Setting Range Note Ex) If set 5 in parameter after connecting power source then it will detect max/min value after 5 seconds. When 1. By pressing key for more than 2 seconds, enter3600
3600
Parameter 1 mode.
changing a setting value during an operating it will not afect detecting the present max/min value. Default=0
High Peak Display max value among present 2. In (Input Range) parameter, set range1800
mode.
1800
1800
▍Parameter 1
1800
- Display value
Display input values. 3. In (scale high
표시값
limit) parameter, set by using shift, up and down keys. 입력값
Function which sets a higher limit of input (measured) value. ( = display value A or B) SCALE function, Default=0
입력값
Low Peak Display min value among present 4. In
표시값
(scale 3600
low limit) parameter, set by using shift, up and
표시값 0 down
5V 10V keys.
입력값 0 5V 10V Input
- Display value 0 5V 10V
0 5V value
10V 표시값
Display Meaning Initial Setting Setting Range Note Display input values. Set the above and press Menu key again
3600
3600 표시값
to go back to RUN MODE.
3600
di
1800 3600
Set High Max. Set Value : + 9999 Set High scale value of the comparison
1800
1800
표시값
0 Parameter 1
Function which sets a lower limit of input (measured) value. ( = display value B or A) SCALE function, Default =0 입력값
1800 3600 1800 표시값
scale value Min. Set Value : - 1999 output 입력값
10V 입력값
표시값
Parameter 0
00
5V
5V
5V 10V
10V 3600
1
3600 입력값 1800 입력
표시값
Set Value 0 5V 10V 0 5V 10V
Set Low Max. Set Value : + 9999 Set Low scale value of the comparison 1800
표시값 3600 입력값 1800
HH ( HH.ot ) values, including the present value when the present value is less than the max value. In contrast, if the present value 0 5V 10V
( ※If function is ON, it is impossible to be defaulted )
is higher than the max value then it will be displayed the present value by the automatic hold. The way of operating
AV Spec. 1 ▍Parameter 2 Terminology Explanation • Retransmission Speed (BPS) Selection Setting: (1200, 2400, 4800, 9600, 19200, 38400)
● Serial Communication
RUN RUN
In Run mode, press the key • Having a present displayed value generates signals of POL (polarity), DOT (decimal point), CK (CLOCK), DATA and LATCH in
2 In Run mode, press the key Display max value among measured values of inputs. order to be easily done with connecting PLC and other processors.
for more than 2 seconds to enter
for 2 seconds or less to enter ● Current Output
the parameter 1 setting mode.
0 the parameter 2 setting mode. Display min value among measured values of inputs. • Generate 4 - 20㎃ d.c.for a present displayed value. ( Resolution 12000 )
● BCD Output ( dynamic, Static )
AA Spec. 1 Set a value of High Comparative Output. Default=5000 • Generate a present displayed value as BCD type (D0, D1, D2, D3, POL (polarity) DOT (decimal point), A0, A1, A2, A3)
① Input range Set ① Input maximum value ● PNP Output ( Open Collector Output 12 - 24 V d.c. 50 ㎃ )
2 display function Set a value of Low Comparative Output. Default=2000 ● NPN Output ( Open Collector Output 12 - 24 V d.c. 50 ㎃ )
● RELAY Output ( 250 V a.c. 5 A below ) 1a, 1b X 3
HI H
HI H : 히스테리 영역
T 8 ㎳ ( minimum ) equal to , HI output turns ON. When the value is larger
H
GO
GO
Address td 0.05 ㎳ ( minimum ) LO H
HI H H When the current display value LOis greater than or영역
equal
GO to
Min. Set Value : LO HI LO H : 히스테리
H
HH
GO
GO , LO output is ON,
HI
When
GO the value is[ 0greater
99 ] than
~H LO or H
GO HI
th 7.9 ㎳ ( minimum ) equal to , HI output turns ON. When the
H
value
H His
GO
1200 ⓑ Communication address DV 0.05V 5V 10V 50V 500V LO
LO
H
LO H H LO GO
Set or , GO output
LO
turns
HION.
HI H
H
H
Set Communication adress and BPS LO
H : 히스테리 영역 HI H
2400 DA 5㎃ 20㎃ 4~20㎃ 50㎃ 500㎃ 5A POL Polarity HI GO GO
GO
※ Display only RS485 communication output GO H HI GO [0~H 99 ]
HI
GO
LO HI H GO
LO
GOH H
Operation is the
GOsame, Under the initial or
H
BPS 4800 GO H
ⓒ Communication AV 5V 50V 500V GO LO H LO
GO GO LO
GO
LOH
DOT Decimal Point HI H less, the LO output does
LO not operate It then works
HI H
H below
H
BPS (Bit per second) Set LO GO H HH: 히스테리 영역 HI
LO H values.
LO
9600
GO
AA 50㎃ 500㎃ 5A GO
GO HI HI
HI LO
[0~H
H
99 ] H
H GO
B-COM BCD Common HI H
GO
GO GO GO HI H LO H
19200 Display value LO H GO
H
HI GO
GO It does not operate under H
HI
the initial LO GO
HI H
H
H H
LO
LO H
H : 히스테리 영역
HI
GO H
LO
GO
HI LO
GO
HI
H
99H]
[ 0 ~H HI
H
LO H HI