Professional Documents
Culture Documents
2-IoT Empower E-House Presentation
2-IoT Empower E-House Presentation
Empowerment
Trust Autonomy
Take operation and
Equipment within maintenance decisions
E-House solution based on data
Other
Predictive 2%
12%
30% to 40%
Reactive Saving
Preventive
31%
> 55% opportunities
Predictive
• More than 55% of maintenance resources and activities of an average facility are still reactive
• Preventive maintenance reduce equipment failure and bring up to 18% in cost reductions
• This can be labor intense and include performance of unneeded maintenance when are time-based
• Predictive maintenance can double the savings up-to a 40%
Source: Sullivan, G.P., Pug, R., Melendez, A.P., Hunt, W.D. (2010). Operations and Maintenance Best practices, US Department of Energy.
Page 8 Unrestricted | © Siemens 2023 | SI EA
Predictive Maintenance is based on the actual condition of the system rather
than on schedule and can bring several benefits.
Predictive Reduction in
maintenance maintenance 30% Elimination of
breakdowns:
75%
savings potentials: costs:
• The level of achievement of these benefits will depend on the well orchestration of the maintenance program.
• The transparency level reached, on-time information and continuous data availability for better evaluation are
examples of elements that can make from Predictive Maintenance a success.
Source: Sullivan, G.P., Pug, R., Melendez, A.P., Hunt, W.D. (2010). Operations and Maintenance Best practices, US Department of Energy.
Page 9 Unrestricted | © Siemens 2023 | SI EA
Cornerstones to Empower an E-House
• Asset transparency
(Asset monitoring)
• Condition monitoring
Awareness • Storage of operational
information
Empowerment
Trust Autonomy
• E-House design • Data accessible by
• Electrification right stakeholders
Systems • Continuous data
availability
Monitoring, control, diagnosis, Cloud platform SCADA / DCS • Easy and reliable
HVAC
System parameterization, on-premise analytics and local monitoring and
Edge gateway control
Fire / Smoke
ROUTER • Support to wide
detection
MQTT, range of industrial
Signal - Hardwiring MindConnect protocols
Access
Lib • Integration of all the
control
SIMARIS
SIMARIScontrol field devices
Communication
Moisture
e.g., BACnet, KNX
control Switch • Easy integration of
detection
peripheral devices
etc.
• Secure connectivity
MV/LV
Device Modbus TCP / IP to cloud application
Peripheral Devices
Inspection on
device
AIS- AIS
MV
SIMARIS control
Antenna
Reader / Converter
Wire-less
sensors
Dedicated connection
Antenna system
Bushing (CT/PT)
Ethernet
Switch
Wire-less
sensors
Ethernet
Switch
Temperature,
Humidity and
Cable Terminal
IEC 61850
Partial Discharge
Wire-less
sensors
Monitoring Legends
MODBUS TCP/IP
Ethernet
Ambient Temperature &
Humidity sensor MQTT
Protection Hardwiring
Relay
MV - GIS
Temperature &
SIMARIS control
Humidity
Monitoring
Ethernet
Switch Ethernet Switch
Partial
Discharge
IEC 61850
MODBUS TCP/IP (In case of 8DJH,
Monitoring
Hardwiring MODBUS RTU
Temp. hardwire signal)
Sensors
NXAIR 8DJH
NXPLUS C
SIVACON S8
8DA GEAFOL
Page 17 Unrestricted | © Siemens 2023 | SI EA
SIMARIS control Asset Transparency: Devices Monitoring
Peripherals
.. and many more devices
SENTRON 3WL/3VL/3VA
NXAIR PD
Temperature and Humidity
GIS PD
• Transparency of electrical
assets: Operational data, device • Siemens algorithm for system
statistical information, alarms, health evaluation based on
trends, local control & condition monitoring signals
parameterization.
www.siemens.com/simaris-control
• www.siemens.com/electrification-automation-webinars
Smart Infrastructure
Electrification & Automation
Mozartstraße 31 C
91052 Erlangen
Germany
For the U.S. published by
Siemens Industry Inc.
100 Technology Drive
Alpharetta, GA 30005
United States
© Siemens 2023
Subject to changes and errors. The information given in this
document/video only contains general descriptions and/or performance
features which may not always specifically reflect those described, or which
may undergo modification in the course of further development of the
products. The requested performance features are binding only when they
are expressly agreed upon in the concluded contract.
All product designations may be trademarks or other rights of Siemens, its
affiliated companies or other companies whose use by third parties for their
own purposes could violate the rights of the respective owner.