Professional Documents
Culture Documents
Table of Contents
Step 7: Finishing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
File Downloads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Related Instructables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Advertisements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Comments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
http://www.instructables.com/id/Simple-Vault-Mechanism/
Author:ThomasJ1 My Website
Most of the things I build usually relate to either astronomy, physics and woodworking in general.
Even though, this mechanism can be built with traditional tools, it will be way easier if you have access to a laser cutter and a drill.
http://www.instructables.com/id/Simple-Vault-Mechanism/
Step 2: The Lid
The diameter of the lid is up to you. It doesn't even have to be a circle as long as the arms of the lock still protrude when they are in the "locked" position.
A smaller circle is cut in the centre of the lid. This part, when rotated will give motion to the arms of the lock. In my design, this circle is hollow because I needed to
accommodate room for a threaded rod.
http://www.instructables.com/id/Simple-Vault-Mechanism/
Step 4: The Axis
4 hole pockets are drilled on the inside of the lid. Dowels are glued in place. 4 caps are laser cut and drilled halfway through. These will keep the arms in place.
http://www.instructables.com/id/Simple-Vault-Mechanism/
Step 5: Arms Assembly
The arms are screwed on the rotating centre. You can now fit the whole assembly on the inside of the lid, making sure that the axis go inside the arms pockets.
http://www.instructables.com/id/Simple-Vault-Mechanism/
Step 6: The Lid Handle
To rotate the centre of your lid, you will need a handle. I decided to cut a circle slightly larger than the rotating part and glue those 2 together. The fact that the handle is
larger prevents the central ring from being pushed through the lid.
Step 7: Finishing
In my project, I use the lid to close the opening of my telescope. As the lid does not have any support, I added some small tabs on the side to make it flush with the end of
the tube. It also prevents the whole lid from spinning when rotating the centre part.
If you want to protect the wood from stains and humidity, you can apply a few coats of polyurethane varnish or some linseed oil. As birch doesn't stain very well, I decided
to go with a clear finish.
If you want to build your own, I am providing an SVG file of the whole mechanism. Have fun with it and please let me know if you've successfully built your own!
http://www.instructables.com/id/Simple-Vault-Mechanism/
File Downloads
vault-mechanism-laser-cutting.zip (2 KB)
[NOTE: When saving, if you see .tmp as the file ext, rename it to 'vault-mechanism-laser-cutting.zip']
Related Instructables
Wooden IPad 2
case by
Hidden Wall mdf vault door Multi-purpose ipadcasedesignteamBottle Vault by Laser Cutting
Outlet Safe by Dvda2108 table by Random_Canadian Basics by
(w/Arduino jdawgbailey001 printeraction
Lock) by ASCAS
http://www.instructables.com/id/Simple-Vault-Mechanism/
Advertisements
Comments
1 comments Add Comment
Are you planning to share anything on that homemade telescope? That looks phenomenal.
http://www.instructables.com/id/Simple-Vault-Mechanism/