Professional Documents
Culture Documents
EDMO Distributors
EDMO Distributors, Inc. phone: 800.337.8378 | 509.535.8280 Warehouse locations:
12830 E. Mirabeau Parkway fax: 800.828.0623 | 509.535.8266 Spokane Valley, WA
Spokane Valley, WA 99216 visit us: www.edmo.com Nashville, TN
Visit the new & improved EDMO.com
EDMO is proud to introduce a modern, fast, one-stop experience—the new edmo.com! Easily
navigate through the four main product categories & find everything you need all in one place.
With intuitive search, navigation, and detailed product descriptions, you can quickly find the best
aviation solutions to fit your needs. Thousands of parts a click away—EDMO has you covered. And
as always, our friendly customer service and sales staff is here for you. Call us at 1.800.235.3300.
Follow the online forms for custom laser wire marking, custom legends or ELT programming.
Submit your information and let EDMO do the rest! You can find all this and more at edmo.com.
About
EDMO
From the company’s inception in 1971, the underlying
principles driving the business emphasized quality
products and exceptional service. 50 years later, EDMO
maintains that vision while representing more than 300
manufacturers and serving commercial, corporate, mil-
itary, and general aviation customers in the fixed-wing
and rotor markets.
EDMO’s core values define the company’s culture of
dazzling its customers, remaining positive, taking
ownership, doing the right thing, and insisting on the
higher standard—all while enjoying the ride. This fo-
cus creates an environment where the team is able to
build lasting value for both customers and vendors by
nurturing customer relationships, developing innova-
tive services, and delivering top-quality products and
service.
EDMO has developed robust relationships with the
aviation industry’s most trusted brands by connecting
them to the right customers. EDMO carries a compre-
hensive range of products including aircraft electron-
ics, installation and bench supplies, wire and cable,
tooling, test equipment, tactical communication solu-
tions, pilot supplies, and ground support equipment.
EDMO’s customer service doesn’t stop with big selec-
tion and quick-turnaround times. EDMO also offers
valuable in-house services that help EDMO customers
save time and money. These services include custom
wire and cable services (both laser wire marking and
cutting), ELT and PLB programming, and custom leg-
end and placard design.
EDMO is committed to providing products and cus-
tomer service of the highest quality; for that reason,
EDMO maintains an ISO 9001/AS9120 registered qual-
ity control system. The company will always stand by
its motto; “Quality and Excellence, Whatever it Takes”.
That’s the EDMO way!
Visit us online at edmo.com or speak to our friendly
customer service and sales staff at 800.235.3300.
Sections
Electrical Interconnect
1
Wire, Cable & Accessories
2
Pitot Static Components
3
Avionics & Instrument Mounting
4
Tools
5
Chemicals & Cleaning
6
Test Equipment
7
Power Supply & Battery Chargers
8
Inverters & Converters
9
ELTs & Accessories
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
Airband Communications
Transponders, Altitude Encoders & Serializers
Tactical Communication & Audio Systems
GPS Components & Accessories
Air Data & Fuel Flow
Clocks & Instruments
Antennas
Aircraft Lighting
Headsets, Intercoms & Accessories
FBO Supplies
Flight Planning & In-Flight Supplies
Safety & Survival
Books & Training
Apparel, Bags & Accessories
Novelties & Gifts
Table of Contents
Table of Contents
A ATEQ OMICRON..........................................................................196
ACK TECHNOLOGIES INC............................................. 247, 253, 283 Audio Adapters & Amplifiers.......................................................304
ACR/ARTEX........................ 189-190, 238-243, 252-256, 500-502, 505 Audio Alerts & Aural Warning Generators.....................................308
AEA TECHNOLOGY, INC........................................................ 193-194 Auxiliary Power Units & Battery Chargers.....................................211
R A MILLER............... 252, 255, 370-373, 375, 382, 385, 387, 392-393, Switch & Cable Assemblies.........................................................474
SANDIA AEROSPACE............................. 108, 234, 279-280, 282, 285, TEMPO COMMUNICATIONS................................................ 137, 188
SCOTT’S SALES INC............................................................ 488-489 Terrain Awareness & Annunciation Control Units..........................325
SKYE AVIONICS........................................................... 291, 470, 477 Tilt Adapters & Glare Shields.......................................................330
Speakers....................................................................................480 Tools.........................................................................................111
W
WAG-AERO GROUP.............................................................. 487-488
Connectors................................................................................................................ 12
Coaxial Adapters........................................................................................................ 23
Terminals & Splices.................................................................................................... 25
Solder Sleeves............................................................................................................ 28
Plugs & Jacks............................................................................................................ 30
Jack Housings........................................................................................................... 32
Circuit Breakers & Accessories.................................................................................... 34
Charging Ports & Power Outlets.................................................................................. 42
Switches.................................................................................................................... 46
Terminal Blocks & Bus Bars........................................................................................ 57
CONNECTORS
1
BNC CONNECTORS
EDMO# MFR# TYPE/MOUNT BODY FINISH/ COMPATIBLE CABLE
CONTACT
STRAIGHT CRIMP
31-315 031-315 Male plug Nickel/gold 188
31-320 031-320 Male plug Nickel/gold 58, 141, 303
31-320RFX 031-320-RFX Male plug Nickel/gold 58, 142, 400
RFB1106-I RFB-1106-I Male Nickel/gold 9913, LMR400 male dual crimp
2-330358-2 2-330358-2 Male plug Silver/gold 142, 142A, 142B
2-331350-1 2-331350-1 Male plug Silver/gold 58, 58A, 58B, 58C
5225395-1 5225395-1 Male plug dual Nickel/gold 58, 58A, 58B, 58C
5225395-2 5225395-2 Male plug dual Nickel/gold 59, 59A, 59B, 62, 62A, 62B
5225395-3 5225395-3 Male plug dual Nickel/gold 55, 55A, 55B, 223
5225395-6 5225395-6 Male plug Nickel/gold 142, 142A, 142B female crimp
5225395-7 5225395-7 Male plug dual Nickel/gold 174, 188
36800-RFX 000-36800-RFX Female jack Nickel/gold 58
225396-7 225396-7 Female jack Nickel/gold 174, 188, 188A, 316
5225396-1 5225396-1 Female jack dual Nickel/gold 58, 58A, 58B, 58C
5225396-2 5225396-2 Female jack dual Nickel/gold 59, 59A, 59B,
5225398-1 5225398-1 Female jack / bulkhead Nickel/gold 58, 58A, 58B, 58C female bulkhead
5225398-6 5225398-6 Female jack / bulkhead Nickel/gold 142, 142A, 142B
225397-1 225397-1 Female jack Nickel/gold 58, 58A, 58B, 58C
RIGHT ANGLE CRIMP
31-335-RFX 031-335-RFX Male plug Nickel/gold 58, 141
31-334 031-334 Male plug Nickel/gold 55, 142, 223, 400
RFB1110-C1 R/FRFB1110-C1 Male dual Nickel/gold 142, 400 male right angle
225974-1 225974-1 Male plug Nickel/gold 58, 58A, 58B, 58C
5225973-4 5225973-4 Male plug Silver/gold 142, 142A, 142B
CRIMP/SOLDER
PE4044 PE4044 Male Nickel/gold 55, 141, 142, 223, 400
PE4209 PE4209 Female / bulkhead Nickel/gold 55, 141, 142, 223, 400
PE4397 PE4397 Female Nickel/gold 55, 141, 142, 223, 400
male crimp/solder
SOLDER
31-2 031-2 Male plug clamp Nickel/silver 58, 141, 303, LMR195, 7806A
31-2RFX 031-2RFX Male plug clamp Nickel/gold 58, 141, 142, 400 male solder
PE4727 PE4727 Male right angle clamp Nickel/gold 213, 214, 8, 9, 225, 393, 215
RBD50-S-00 RBD-50-S-00 Male plug Nickel/gold 174, 178, 188, 196, 316
RBD50-M-03 RBD-50-M-03 Female jack Nickel/gold 58, 141, 142, 303, 400
31-5 031-5 Female jack clamp Nickel/silver 58, 141, 303, LMR195, 7806A female solder
TNC CONNECTORS
1
EDMO# MFR# TYPE/MOUNT BODY FINISH/ COMPATIBLE CABLE
CONTACT
STRAIGHT CRIMP
PE4047 PE4047 Male dual Nickel/gold 55, 141, 142, 223, 400
PE4302 PE4302 Male dual Nickel/gold 174, 188, 316, LMR-100, PE-B100, PE-C100
RFT1202-C1 R/FRFT1202-C1 Male Nickel/gold 142, 223, 400
RFT1202-I RFT1202-I Male Nickel/gold LMR400, 9913 male dual crimp
1-225550-3 1-225550-3 Male plug Silver/gold 393
225550-6 225550-6 Male plug dual Silver/gold 142, 400
225555-2 225555-2 Male plug Nickel/gold 58A, 58B
225555-6 225555-6 Male plug Nickel/gold 142, 142A, 142B
31-2367 AMP31-2367 Male plug dual Nickel/gold 58, 58A, 58B, 58C, 141, 303, LMR195
5222506-1 5222506-1 Male plug hex Nickel/gold 58, 58A,58B, 58C
5225555-8 5225555-8 Male plug dual Nickel/gold 214 female dual crimp
RFT1212 R/FRFT1212 Female / bulkhead Nickel/gold 58, LMR195
RFT1216-1 RFT1216-1 Female Nickel/gold 58, 400
RFT1216-C1 R/FRFT1216-C1 Female Nickel/gold 142
225551-2 225551-2 Female jack dual Silver/gold 58A, 58C
RIGHT ANGLE CRIMP
1-225554-1 1 2255541 Male plug Silver/gold 393
RFT1218 R/FRFT1218 Male dual Nickel/gold 58, LMR195
RFT1218-C1 RFT-1218-C1 Male dual Nickel/gold 142, 223, 400
RTD50-M-01 593035-000 Male Nickel/gold 58, 141, 142, 303, 400
225554-6 225554-6 Male plug Silver/gold 142, 142A, 142B, 400 male right angle
225559-2 225559-2 Male plug Nickel/gold 58, 58A, 58B, 58C
5225554-6 5225554-6 Male plug Silver/gold 142, 142A, 142B
5225554-9 5225554-9 Male plug dual Nickel/gold 9, 9A, 214
414173-3 414173-3 Male plug dual Nickel/gold 174, 174A, 188, 188A, 316
CRIMP/SOLDER
PE4447 PE4447 Male Nickel/gold 9, 214, 225, 393
PE4664 PE4664 Male reverse polarity Nickel/gold 58
PE4153 PE4153 Female / bulkhead Nickel/gold 55, 141, 142, 223, 400
female crimp/solder
PE4457 PE4457 Female Nickel/gold 55, 141, 142, 223, 400
STRAIGHT SOLDER
PE4088 PE4088 Male clamp Nickel/gold 8, 9, 11, 144, 213, 214, 215, 216, 225, 393
RTD50-M-00 RTD-50-M-00 Male plug Nickel/gold 58, 141, 142, 303, 400
male solder
RF TERMINATOR
PE6089 PE6089 Male Stainless steel/gold
RF terminator male
N CONNECTORS
1
CRIMP/SOLDER
PE4477 PE4477 Male Nickel/gold/ptfe 55, 141, 142, 223, 400
PE4191 PE4191 Female Nickel/gold/ptfe 9, 214, 225, 393 male crimp/solder
SMA CONNECTORS
EDMO# MFR# TYPE BODY FINISH/ COMPATIBLE CABLE
CONTACT
CRIMP
225532-1 225532-1 Male plug Stainless steel/gold 58, 58A, 58B, 58C
225532-3 225532-3 Male plug dual Stainless steel/gold Belden 84142, 142, 142A, 142B, 400
RSA3000-I RSA3000-I Male Nickel/gold 9913, LMR400 male dual crimp
CRIMP/SOLDER
PE4008 PE4008 Male Nickel/gold 55, 141, 142, 223, 400
male crimp/solder
UHF CONNECTORS
1
EDMO# MFR# TYPE BODY FINISH/ COMPATIBLE CABLE
CONTACT
CRIMP
RFU507-SI R/FRFU507-SI Male dual Silver/silver 9913, LMR400
226279-1 226279-1 Male plug single Nickel/tin 58/58A/ 58B, 58C
male crimp/solder
For more information on these crimp tools, check out the Tools section (chapter 5). Parts not shown to scale.
MS CIRCULAR CONNECTORS
MS circular connectors meet the performance requirements of MIL-DTL-5015 specifications while providing cost-effective, well-proven electrical capabilities in
critical equipment. MIL-DTL-5051 spec connectors feature threaded couplings and single key/keyway polarization to simplify installation and design.
230021-1
CPC CONNECTORS
1
Molded plastic CPC connectors provide a substantial savings in both weight and cost because of their plastic shells. Multiple shell sizes, densities, and configura-
tions are available.
male free-hanging
receptacle
female plug
PINS SHELL SIZE FEMALE PLUG MALE SQUARE FLANGE RECEPTACLE MALE FREE-HANGING RECEPTACLE
STANDARD SEX CONNECTORS
4 11 206060-1 206061-1 206153-1
9 13 206708-1 206705-1 206705-2
16 17 206037-1 206036-1 206036-3
24 23 206837-1 206838-1 206838-2
37 23 206150-1 206151-1 206151-2
PINS SHELL SIZE MALE PLUG FEMALE SQUARE FLANGE RECEPTACLE FEMALE FREE-HANGING RECEPTACLE
REVERSE SEX CONNECTORS
4 11 206429-1 206430-1 206430-2
14 17 206044-1 206043-1 206043-3
37 23 206305-1 206306-1 206306-2
PINS SHELL SIZE STANDARD NUMBERED FEMALE MALE FEED-THROUGH REVERSE NUMBERED FEMALE
PLUG RECEPTACLE: PLUG
1
EDMO# MFR# SHELL SIZE CABLE INSULATION DIAMETER THREAD SIZE
1-206062-4 1-206062-4 11 8.36 mm 5/8 - 24
206966-7 206966-7 13 17.86 mm 3/4 - 20
206070-8 206070-8 17 11.51 mm 15/16 - 20
206138-8 206138-8 23, M41 17.86 mm 1-3/8 - 18
1-206062-4 206138-8
PINS FOR SERIES 1 MALE CPC CONNECTORS SOCKETS FOR SERIES 1 FEMALE CPC
& FEED-THROUGH CONNECTORS
INSERTION TOOL
EDMO# 91002-1
MFR# 910021
The AMP insertion tool for connector pins. Contact sizes 20-24 AWG.
For information on these tools, check out the Tools section (chapter 5).
PINS SHELL SIZE FEMALE PLUG MALE SQUARE FLANGE RECEPTACLE MALE FREE-HANGING RECEPTACLE
STANDARD SEX CONNECTORS
8 11 205838-1 205841-1 205841-2
9 11 206485-1 206486-1 206486-2
28 17 205839-3 205840-3 206152-1
receptacle
female free-hanging
male plug receptacle
PINS SHELL SIZE MALE PLUG FEMALE SQUARE FLANGE RECEPTACLE FEMALE FREE-HANGING RECEPTACLE
REVERSE SEX CONNECTORS
8 11 206434-1 206433-1 206433-2
28 17 206039-1 206038-1 206038-2
PINS SHELL SIZE STANDARD NUMBERED FEMALE MALE FEED-THROUGH REVERSE NUMBERED FEMALE
PLUG RECEPTACLE: PLUG
FEED THROUGH CONNECTORS
8 11 205838-1 206458-1 206460-1
28 17 206125-1 206127-1 206126-1
1-206062-4 206138-8
PINS FOR SERIES 2 MALE CPC CONNECTORS SOCKETS FOR SERIES 2 FEMALE &
FEED THROUGH CONNECTORS
EDMO# MFR# AWG FINISH EDMO# MFR# AWG FINISH
205089-1 205089-1 24/20 Gold/closed barrel 205090-1 205090-1 24/20 Gold/closed barrel
1-66506-0 1-66506-0 24/20 Gold/open barrel 1-66504-0 1-66504-0 24/20 Gold/open barrel
1
EDMO# AFM8 EDMO# 91285-1
MFR# AFM8 MFR# 91285-1
Daniels Crimp tool. Insertion and extraction tool with inter-
changeable tips for use with HD-22 and
HD-20 contacts. Includes a handle, six
tips, a hex wrench, and a plug. Each plug is color-coded according to specific
type and wire size.
For information on these tools, check out the Tools section (chapter 5).
METRIMATE CONNECTORS
MATE-N-LOK CONNECTORS
1
Mate-N-Lok connectors are constructed with fully polarized nylon housings and provide easy cavity identification. Locking devices, built-in contact stabilization,
and self-aligning features keep the connector halves securely in place while a hot side egg-crate design promotes safety.
• Durable, locking design holds together under severe conditions of vibration and shock
• Low insertion/extraction forces, accepts size range of 30-14 AWG (2-inch centerline)
• Wire to PC board capability using pin or socket headers
• Solderability headers meet MIL-STD 202 method 208
MOTOR MOUNT
EDMO# MFR# # OF PINS EDMO# MFR# # OF PINS
PIN HOUSING SOCKET HOUSING
1-480698-0 1-480698-0 2 1-480699-0 1-480699-0 2
1-480271-0 1-480271-0 6 1-480270-0 1-480270-0 6
1-480284-0 1-480284-0 8 1-480283-0 1-480283-0 8
1-480286-0 1-480286-0 10 1-480285-0 1-480285-0 10
1-480288-0 1-480288-0 12 1-480287-0 1-480287-0 12
1-480439-0 1-480439-0 16 pin housing 16-pin 1-480438-0 1-480438-0 16 socket housing 16-pin
FREE HANGING
EDMO# MFR# # OF PINS EDMO# MFR# # OF PINS
PIN HOUSING SOCKET HOUSING
1-480350-0 1-480350-0 1 1-480349-0 1 480349-0 1
1-480319 1-480319-0 2 1-480318 1-480318-0 2
1-480305-0 1-480305-0 3 1-480303-0 1-480303-0 3
1-480426-0 1-480426-0 4 1-480424-0 1 480424-0 4
pin housing 4-pin socket housing 4-pin
PANEL MOUNT
EDMO# MFR# # OF PINS EDMO# MFR# # OF PINS
PIN HOUSING SOCKET HOUSING
1-480276-0 1 480276-0 6 1-480273-0 1 480273-0 6
1-480345-0 1-480345-0 8 1-480283-0 1-480283-0 8
1-480277-0 1 480277-0 9 1-480274-0 1-480274-0 9
1-480278-0 1-480278-0 12 1-480275-0 1-480275-0 12
PINS FOR MATE-N-LOK PIN HOUSINGS SOCKETS FOR MATE-N-LOK PIN HOUSINGS
D CONNECTORS
1
HDP-20 CRIMP SNAP-IN CONTACT CONNECTORS
HDP-20 crimp snap-in contact connectors provide a wide choice of contact positions (9, 15, 25, 37 and 50) and they are intermateable with any size 20 subminia-
ture D connector dimensionally complying with MIL-C-24308. Constructed with a steel shell and zinc plating.
PLUGS RECEPTACLES
EDMO# MFR# SHELL # OF EDMO# MFR# SHELL # OF
SIZE PINS SIZE PINS
205204-9 205204-9 1 9 205203-8 205203-8 1 9
205206-9 205206-9 2 15 205205-7 205205-7 2 15
5205208-1 5205208-1 3 25 205163-1 M24308/2-282F 2 15
204517-2 204517-2 3 44 205557-2 205557-2 2 15 (includes
sockets)
205210-8 205210-8 4 37 5205207-1 5205207-1 3 25
204519-2 204519-2 4 62 205209-7 205209-7 4 37
1658641-3 1658641-3 5 50 204518-2 204518-2 4 62
1658674-1 1658674-1 5 78 1658640-2 1658640-2 5 50
204521-2 204521-2 5 78 (includes 204520-2 204520-2 5 78
pins)
PLUGS RECEPTACLES
EDMO# MFR# SHELL # OF EDMO# MFR# SHELL # OF
SIZE PINS SIZE PINS
5-747904-4 5-747904-4 1 9 5-747905-4 5-747905-4 1 9
5-747908-2 5-747908-2 2 15 5-747909-2 5-747909-2 2 15
5-747912-4 5-747912-4 3 25 5-747917-2 5-747917-2 4 37
5-747913-2 5-747913-2 3 25
EDMO# MFR# AWG FINISH BARREL EDMO# MFR# AWG FINISH BARREL
1-66506-0 1-66506-0 24-20 Brass/gold Open 1-66504-0 1-66504-0 24-20 Phosphor bronze/gold Open
205089-1 205089-1 24-20 Copper alloy/gold Closed 205090-1 205090-1 24-20 Copper alloy/gold Closed
FEMALE SCREW LOCK KIT FOR D CONNECTORS MALE SCREW RETAINER KIT FOR D CONNECTORS
For use with metal shell or all plastic D connec- EDMO# 5205980-1
tors. Steel with zinc plating. 4-40 UNC thread MFR# 5205980-1
size, RoHS compliant. For use with metal shell D connec-
tors. Carbon steel screw with zinc
EDMO# MFR# FINISH plating and yellow chromate finish.
4-40 UNC thread size, RoHS compliant
5205817-3 5205817-3 Clear chromate
5205817-1 5205817-1 Yellow chromate MALE JACKSCREW KIT FOR
D CONNECTORS
EDMO# 747784-3
MFR# 747784-3
SLIDE LATCH CLIP FOR D CONNECTORS Stainless steel. 4-40 UNC thread size, RoHS compliant.
EDMO# 5206942-1
MFR# 5206942-1 SLIDING LOCK POST KIT
Slide latch assembly for use with D connectors. EDMO# 5206514-1
Stainless steel latch and steel screw with zinc MFR# 5206514-1
plating. 4-40 UNC thread size, RoHS compliant. For use with cable clamps. Male, cold rolled
steel with zinc plating. 4-40 UNC thread size,
RoHS compliant.
EDMO# MFR# AWG FINISH BARREL EDMO# MFR# AWG FINISH BARREL
M390291102 M39029/1-102 16-14 Brass/gold Closed 3902922605 M39029/22-605 14-12 Copper alloy/gold Closed
M39029/1-1 M39029/1-101 20-16 Brass/gold Closed 3902922193 M39029/22-193 20-16 Copper alloy/gold Closed
M390294110 M39029/4-110 20 Gold Closed
3902992533 M39029/92-533 20-16 Copper alloy/gold Closed
M390295863 M39029/58-363 20 Gold Closed
3902932247 10-257982-16F 20-16 Copper alloy/gold Closed
3902931240 M39029/31-240 24-20 Copper alloy/gold Closed
3902932259 M39029/32-259 24-20 Copper alloy/gold Closed
3902931627 M39029/31-240 24-20 Copper alloy/gold Closed
3902931627 M39029/31-627 24-20 Copper alloy/gold Closed M390293226 M39029/32-260 24-20 Copper alloy/gold Closed
3902958360 M39029/58-360 28-22 Copper alloy/gold Closed M390295115 M39029/5-115 24-20 Copper alloy/gold Closed
3902956348 M39029/56-348 28-22 Gold Open 3902922192 M39029/22-192 24-20 Copper alloy/gold Closed
3902922191 M39029/22-191 26-22 Copper alloy/gold Closed
3902957354 MS39029/57-354 26-22 Copper alloy/gold Closed
COUNT ON EDMO TO HAVE EXACTLY WHAT YOU NEED, WHEN YOU NEED IT.
Everything our customers need at the bench, we supply: connectors, insertion and removal tools, crimpers, terminals and splices, heat guns, solder
sleeves, plugs and jacks, circuit breakers, power outlets, switches, and custom legends. All of this, and more: EDMO has it all. Call one of our friendly sales
representatives with questions, or find exactly what you need online at edmo.com.
COAXIAL ADAPTERS
1
EDMO# MFR# TYPE PLATING BODY/
CONTACT
STRAIGHT
PE9006 PE9006 N female-N female Nickel/gold
PE9078 PE9078 SMA male-TNC female Nickel/gold
PE9087 PE9087 BNC female-C male Nickel/gold
PE9088 PE9088 TNC male-BNC female Nickel/gold
PE9093 PE9093 BNC female-BNC female Nickel/gold
(hermetically sealed)
PE9099 PE9099 TNC female-TNC female Nickel/gold BNC male-male BNC female-female
PE9126 PE9126 HN male-BNC female Nickel/gold
PE9129 PE9129 HN female-BNC male Nickel/gold
PE9131 PE9131 N female-TNC female Nickel/gold
PE9154 PE9154 TNC female-TNC female Nickel/gold
(hermetically sealed)
PE9206 PE9206 N female-BNC female Nickel/gold
PE9531 PE9531 TNC female-TNC male reverse polarity Nickel/gold
PE9562 PE9562 TNC male-C female Nickel/silver BNC female-female TNC female-female
31-28RFX 031-28RFX BNC female-UHF male Nickel/silver bulkhead bulkhead
31-208RFX 031-208RFX BNC female-BNC male-BNC female Nickel/gold
31-216RFX 031-216-RFX N male-BNC female Nickel/silver
31-217RFX 031-217-RFX N female-BNC male Nickel/silver
31-218RFX 031-218RFX BNC male-BNC male Nickel/gold
31-219 031-219 BNC female-BNC female Nickel/silver
31-220NRFX 031-220N-RFX BNC female-BNC female Nickel/gold
31-220H 031-220H BNC female-BNC female Nickel/silver BNC female-
(pressurized) BNC female-N male
UHF male
RFB1137 RFB1137 BNC female-UHF male Nickel/silver
RFT1230 R/FRFT1230 TNC female-BNC male Nickel/gold
RFT1231 R/FRFT1231 TNC male-BNC female Nickel/gold
RFT1232 R/FRFT1232 TNC female-BNC female Nickel/gold
RSA3452 R/FRSA3452 SMA male-N female Nickel/gold
RSA3458 R/FRSA3458 SMA male-BNC female Nickel/gold
RSA3476 R/FRSA3476 BNC male-SMA female Nickel/gold BNC male-N female N female-N female
330024 330024 BNC female-BNC female Nickel/silver
RIGHT ANGLE
PE4230 PE4230 HN male Nickel/gold
PE9278 PE9278 N male-BNC female Nickel/silver
PE9566 PE9566 N Female-BNC male Nickel/gold
PE9783 PE9783 TNC male-BNC female Nickel/silver
31-9RFX 31-9RFX BNC female-BNC male Nickel/silver
34-111112G 034-1111-12G HD BNC-HD BNC Nickel/gold
RFT1227 R/FRFT1227 TNC female-TNC male Nickel/gold
DBFTMA-90 DBFTMA-90 BNC female-TNC male Nickel/gold
221988-1 221988-1 BNC female tee Nickel/silver BNC female-male TNC male-female
right angle right angle
TEE
PE9290 PE9290 TNC Tee male-female-female Nickel/silver
*More connector and coaxial adapter kits available. Check out the Test Equipment section (chapter 7).
1
PIDG TERMINALS & SPLICES
Pre-insulated diamond grip (PIDG) ring tongue terminals consist of a precision-formed metal wire barrel and a copper sleeve encased in insulating material
made of nylon, polyvinyl chloride (PVC), or polyvinyl fluoride (PVF2). The wire barrel contains serrations that provide maximum contact and tensile strength after
crimping the terminal, splice, or end cap onto the wire. Each terminal has a color-coded body that indicates the applicable wire range (to help reduce errors during
installation).
RING TERMINALS
EDMO# MFR# STUD AWG COLOR EDMO# MFR# STUD AWG COLOR
SIZE SIZE
31880 31880 4 22-16 Red 320560 320560 8 16-14 Blue
320553 320553 4 22-18 Red 320565 320565 8 16-14 Blue
31894 31894 6 22-16 Red 51864-1 51864-1 8 16-14 Blue
36150 36150 6 22-16 Red 36160 36160 10 16-14 Blue
36151 36151 6 22-18 Red 51864-2 51864-2 10 16-14 Blue
36152 36152 6 22-16 Red 8-55852-2 8-55852-2 10 16-14 Blue
51863 51863 6 22-16 Red 321045 321045 1/4 16-14 Blue
31886 31886 8 22-16 Red 328998 328998 5/16 16-14 Blue
31890 31890 8 22-16 Red 328999 328999 3/8 16-14 Blue
320551 320551 8 22-16 Red 323914 323914 4 26-22 Yellow
320554 320554 8 22-16 Red 323915 323915 6 26-22 Yellow
2-36153-3 2-36153-3 10 22 Red 35107 35107 6 12-10 Yellow
320552 320552 10 22-16 Red 35149 35149 6 12-10 Yellow
36154 36154 10 22-16 Red 35108 35108 8 12-10 Yellow
320571 320571 1/4 22-16 Red 35109 35109 12 12-10 Yellow
31895 31895 5/16 22-16 Red 320569 320569 1/4 12-10 Yellow
31897 31897 3/8 22-16 Red 35110 35110 1/4 12-10 Yellow
328975 328975 1/2 22-16 Red 35111 35111 5/16 12-10 Yellow
328996 328996 4 16-14 Blue 35112 35112 3/8 12-10 Yellow
320561 320561 6 16-14 Blue 35151 35151 1/2 12-10 Yellow
320619 320619 6 16-14 Blue 323985 323985 4 24-20 Clear
326882 326882 6 16-14 Blue 323986 323986 6 24-20 Clear
36158 36158 6 16-14 Blue 323989 323989 8 24-20 Clear
328849 328849 1/2 16-14 Blue 323990 323990 10 24-20 Clear
PIDG SPLICES
PIDG FASTON receptacles are pre-insulated and consist of a tin-plated brass body with a copper sleeve fitted over the terminal barrel. Color-coded to indicate wire
size range suitable for the receptacle.
Quick disconnect PIDG FASTON tabs are solid metal tabs with plastic insulation on the crimp end. The metal support sleeve under the insulation crimps tightly
onto the wire insulation and provides wire strain relief in high vibration environments. Color-coded insulation for easy visual identification.
EDMO# MFR# SIZE AWG COLOR EDMO# MFR# SIZE AWG COLOR
RECEPTACLES TABS
640903-1 640903-1 0.25 22-18 Red 66023-2 66023-2 0.25 22-16 Red
640911-1 6409111-1 0.205 22-18 Red 66024-2 66024-2 0.25 16-14 Blue
640917-1 6409171-1 0.187 22-18 Red 66025-2 66025-2 0.25 12-10 Yellow
640923-1 6409231-1 0.11 22-18 Red
640905-1 6409051-1 0.25 16-14 Blue
640913-1 640913-1 0.205 16-14 Blue
640919-1 640919-1 0.187 16-14 Blue
640929-1 640929-1 0.11 16-14 Blue
640907-1 640907-1 0.25 12-10 Yellow
EDMO: BIG SELECTION, PRODUCTS YOU KNOW & NAMES THAT YOU TRUST.
Did you know that EDMO has a large inventory of installation supplies? If you don’t see what you need here, it’s likely we have it, or can order it in for
you. You can also check out the newly improved edmo.com. With thousands of parts a click away, EDMO has you covered. And as always, our friendly
customer service and sales staff is here for you. Call us at 1.800.235.3300.
1
TERMINYL splices and terminals are designed for the
321298 321298 10 6
larger wire sizes used in airborne and ground support
321598 321598 1/4 6
applications. TERMINYL products withstand vibration,
shock and structural stresses, elevated temperatures 33465 33465 1/4 6
and other conditions that can adversely affect the 33466 33466 5/16 6
circuit requirements in aviation equipment. Pre-insu- 33467 33467 3/8 6
lated with color-coded nylon and constructed with fine 2-324061-5 2-324061-5 8 8
grade, high-conductivity copper with corrosion-resistant 32996 32996 8 8
plating. 33460 33460 10 8
• Meets or exceeds the requirements of MIL-T-7928, Type 11, class 2. 33461 33461 1/4 8
33462 33462 5/16 8
EDMO# MFR# STUD SIZE AWG 33463 33463 3/8 8
RED 31518 31518 2 26-22
324053 324053 1/4 2 1-321897-3 1-321897-3 8 22-16
324054 324054 3/8 2 1-321898-0 1-321898-0 10 22-16
324043 324043 10 8 321584 321584 3/8 2/0
324044 324044 5/16 8 36922 36922 5/16 2/0
324045 324045 3/8 8 36923 36923 3/8 2/0
324082 324082 1/4 8 36925 36925 1/2 2/0
BLUE 36915 36915 1/4 1/0
324187 324187 3/8 4 36916 36916 5/16 1/0
324046 324046 10 6 36917 36917 3/8 1/0
324047 324047 1/4 6 36918 36918 7/16 1/0
324048 324048 5/16 6 36919 36919 1/2 1/0
324049 324049 3/8 6
YELLOW
324050 324050 1/4 4
324051 324051 5/16 4 BUTT SPLICES 34322 34323
324052 324052 3/8 4
324111 324111 10 4
EDMO# MFR# AWG
35189 35189 2
34323 34323 4
34322 34322 6
SOLISTRAND TERMINALS & SPLICES 34321 34321 8
SOLISTRAND terminals and splices are
used to terminate solid and stranded
wire and irregular shaped conductors.
Constructed with high-conductivity copper
that’s electro-tinned for improved corrosion
resistance. SOLISTRAND terminals consist 33461 33463
of a completely closed barrel with serrations CRIMP TOOLS FOR TERMINYL/SOLISTRAND
inside that provide optimum tensile strength TERMINALS & SPLICES
and maximum electrical contact after
crimping. The barrel has a conical entry for
easy wire insertion. For use with regular
wire/cable types.
33469 321298 EDMO# 601075, 601075-1
MFR# 601075, 601075-1
SOLDER SLEEVES
polyvinylidene fluoride tubing with
meltable sealing rings.
• Eutectic point of solder: 183°C (H-C-x) /143°C (L-C-x)
• Operating temperature range: -55°C to +150°C (H-C-x) / -55°C to +105°C
SOLDER TERMINATION SLEEVES (L-C-x)
Solder termination sleeves consisting of an outer,
heat-shrinkable jacket crafted with a precision-engi- EDMO# MFR# MAX DIAMETER
neered polyvinylidene fluoride sleeve that contains
H-C-2 STS H-C-2 0.125
just the right amount of pre-fluxed solder—assuring
reliable connections with each use. During the shrinking L-C-1 189-10274 0.095
S01-05-R
process, the tubes’ thermoplastic sealing rings melt L-C-2 189-10282 0.125
and flow to strain-relieve and create an environmental L-C-3 STS L-C-3 0.200
seal that meets SAE-Spec criteria. The solder preform L-C-4 L-C-4 0.250
is coated with a special thermochromic indicator that L-C-5 STS L-C-5 0.300
changes color when the necessary amount of heat has H-M-5
been applied.
Refer to the following plug and jack compatibility diagrams when ordering parts. Part numbers and descriptions on the following pages.
Please note the diagrams shown here are for representational purposes only and are not displayed to scale.
TABLE 1. TABLE 4.
SWC S12B
SWC 11 (JJ033)
(JJ034)
SWC 80
SWC S830
TABLE 2.
SWC 112BX TABLE 5.
(stereo)
MP-101 MJ-101
SWC 240 (U 173/U) (U 172/U)
(mono)
TJ-120 TABLE 8.
(U 92B/U-R)
panel mount
TJ-101 TP-120
(U174/U) SWC S10221 SWC S1028 SWC S1029 TJT120-3
washer for insulated flat insulated washer for
TJ-102 JJ jacks washer shoulder washer TJT-120
(U 92A/U free
hang)
TP-102
(U 93A/U) SWC 515X SWC S1027 TJT120-2
TJS-102 free hang Spring loaded nut for JJ jacks nut for TJT-120
(with clip) jack cover
free hang
W/PTT
TABLE 1 TABLE 2
TABLE 3
EDMO# MFR# DESCRIPTION
1
EDMO# MFR# DESCRIPTION MP-101 MP-101 U173/U microphone plug
JACK HOUSINGS
1
JACK HOUSINGS
Durable aluminum surface and flush-mounted housings. Available in plain alumi-
num or with a powder coated finish. Surface-mounted jack housings provide an
attractive, tidy cover for mic and phone jacks. Flush mount jack housings keep
plugs out of the way with a recessed design that creates a finished, custom look
in the cabin (sold with clamp and mounting screw—no jack hardware).
• Aluminum construction
• Mounts with 2 or more holes have 1 inch between hole centers
1
Designed to house Nexus mic and phone jacks with durable, 0.040-inch thick aluminum with either
a powder coat finish or no finish. These housings are for surface mounting; mount with four small
screws.
• Aluminum construction
Not finding what you need? Give us a call at 1.800.235.3300 or view our full inventory at edmo.com.
ACCESSORIES 7277-5-15
7277-5-20
7277-5-15
7277-5-20
15
20
7277-5-25 7277-5-25 25
ACCESSORIES
7277 SERIES 7277-2-NUT 7277-2 7277-2 series hardware kit
KLIXON 75838-1 75838-1 7277 hardware plug
The Klixon 7277 series circuit breakers are meant for use in
applications that do not require military approvals. The trip-free
7277 was originally developed as an alternative to slow blow
fuses and is used extensively as primary electrical circuit pro-
tection on general aviation aircraft. The military grade version
of this circuit breaker is the physically and electrically identical 7274 SERIES
Klixon 7274-2, which has wider calibration limits. KLIXON
• Miniature size and lightweight The Klixon 7274 series circuit breakers are small, light-
• Trip-free design weight, low amperage devices that protect aerospace cable
7277-2 and components in airborne vehicles and equipment. The
• High vibration resistance commercial grade version of this circuit breaker is the Klixon
• Typical use: computers, construction, data processing and telecommuni- 7277 series, which is physically and electrically identical to
cations equipment, flight simulators, general aviation aircraft, materials the 7274-2 except that the 7277 has wider calibration limits.
handling, trainers, and simulators where all breakers are operated on low The 7274 is available in standard ratings from 1/2 to 20
ampere control current amps and has a trip–free, indicating reset button. A “wiping
action” contact design provides low voltage drop, faster trip
time, and high reliability in low voltage applications. They are
available in standard ratings from 1/2 to 20 amps.
Weight: 28 grams max. 7274-2
• Lightweight and uses minimum space
Current rating: 0.5 to 20 amps
Vibration: 10 G minimum, 50–500 Hz
• Trip-free
Mechanical shock: 35 G • MIL-C-5809 qualified
Acceleration: 10 G • High vibration resistance
Interrupt current: 0.5–5 amps: unlimited at 28 VDC • Typical use: military airborne vehicle and equipment protection
7.5–15 amps: 2,000 amps at 28 VDC
0.5–1.5 amps: unlimited at 120 VAC, 400 Hz
2-5 amps: 800 amps at 120 VAC, 400 Hz
7.5–20 amps: 500 amps at 120 VAC, 400 Hz
Weight: 7274-2 (MS 26574): 28 grams max.
Endurance: 2,500 cycles: 120 VAC, 400 Hz inductive 7274-4 (MS 26574 A): 28 grams max.
5,000 cycles: 120 VAC, 400 Hz resistive 7274-11 (MS 22073): 33 grams maxi.
2,500 cycles: 30 VDC inductive 7274-69 (MS 22073V): 33 grams
5,000 cycles: 30 VDC resistive 7274-70 (MS 26474L): 33 grams
10,000 cycles: mechanical, no load
Current rating: 0.5 to 20 amps
Vibration: 10 G minimum, 50-500 Hz
Mechanical shock: 35 G
EDMO# MFR# AMP RATING Acceleration: 10 G
7277-2-1/2 7277-2-1/2 0.5 Interrupt current: 0.5–5 amps: unlimited at 28 VDC
7.5–15 amps: 2,000 amps at 28 VDC
7277-2-3/4 7277-2-3/4 0.75 0.5–1.5 amps: unlimited at 120 VAC, 400 Hz
7277-2-1 7277-2-1 1 2–5 amps: 800 amps at 120 VAC, 400 Hz
7.5–20 amps: 500 amps at 120 VAC, 400 Hz
7277-2-1.5 7277-2-1.5 1.5
Endurance: 2,500 cycles: 120 VAC, 400 Hz inductive
7277-2-2 7277-2-2 2 5,000 cycles: 120 VAC, 400 Hz resistive
7277-2-2.5 7277-2-2 1/2 2.5 2,500 cycles: 30 VDC inductive
5,000 cycles: 30 VDC resistive
7277-2-3 7277-2-3 3 10,000 cycles: mechanical, no load
7277-2-4 7277-2-4 4
7277-2-5 7277-2-5 5
7277-2-7.5 7277-2-7 1/2 7.5
7277-2-10 7277-2-10 10 EDMO# MFR# MIL-SPEC AMP RATING
7277-2-15 7277-2-15 15 7274-2-.5 7274-2-1/2 MS26574-.5 0.5
7277-2-20 7277-2-20 20 7274-2-.75 7274-2-.75 MS26574-.75 0.75
7277-5-1/2 7277-5-1/2 0.5 7274-2-1 7274-2-1 MS26574-1 1
7277-5-.75 7277-5-3/4 0.75 7274-2-1.5 7274-2-1 1/2 MS26574-1.5 1.5
7277-5-1 7277-5-1 1 7274-2-2 7274-2-2 MS26574-2 2
7277-5-2 7277-5-2 2 7274-2-2.5 7274-2-2 1/2 MS26574-2.5 2.5
7277-5-2.5 7277-5-2.5 2.5 7274-2-3 7274-2-3 MS26574-3 3
7277-5-3 7277-5-3 3 7274-2-4 7274-2-4 MS26574-4 4
7277-5-4 7277-5-4 4 7274-2-5 7274-2-5 MS26574-5 5
7277-5-5 7277-5-5 5 7274-2-7.5 7274-2-7 1/2 MS26574-7.5 7.5
7277-5-7.5 7277-5-7 1/2 7.5 7274-2-10 7274-2-10 MS26574-10 10
7277-5-10 7277-5-10 10
EDMO# MFR# MIL-SPEC AMP RATING EDMO# MFR# MIL-SPEC AMP RATING
1
7274-2-15 7274-2-15 MS26574-15 15 7270-1-3 7270-1-3 MS24509-A-3 3
7274-2-20 7274-2-20 MS26574-20 20 7270-1-5 7270-1-5 MS24509-A-5 5
7274-4-1/2 7274-4-1/2 MS26574-1/2A 0.5 7270-1-7.5 7270-1-7.5 MS24509-A-7 1/2 7.5
7274-4-2 7274-4-2 MS26574-2A 2 7270-1-10 7270-1-10 MS24509-A-10 10
7274-4-5 7274-4-5 MS26574- 5 7270-1-15 7270-1-15 MS24509-A-15 15
7274-4-7.5 7274-4-7.5 - 7.5 7270-1-20 7270-1-20 MS24509-A-20 20
7274-4-10 7274-4-10 MS26574- 10 7270-1-25 7270-1-25 MS24509-A-25 25
7274-4-15 7274-4-15 - 15 7270-1-30 7270-1-30 MS24509-A-30 30
7274-4-20 7274-4-20 - 20 7270-1-35 7270-1-35 MS24509-A-35 35
7274-11-.5 7274-11-1/2 MS22073-1/2 0.5 7270-5-3 7270-5-3 - 3
7274-11.75 7274-11-.75 MS22073-3/4 0.75 7270-5-5 7270-5-5 - 5
7274-11-1 7274-11-1 MS22073-1 1 7270-5-7.5 7270-5-7.5 - 7.5
7274-111.5 7274-11-1.5 MS22073-1 1/2 1.5 7270-5-10 7270-5-10 - 10
7274-11-2 7274-11-2 MS22073-2 2 7270-5-15 7270-5-15 - 15
7274-112.5 MS22073-2 1/2 MS22073-2 1/2 2.5 7270-5-20 7270-5-20 - 20
7274-11-3 7274-11-3 MS22073-3 3 7270-5-25 7270-5-25 - 25
7274-11-4 7274-11-4 MS22073-4 4 7270-5-30 7270-5-30 - 30
7274-11-5 7274-11-5 MS22073-5 5 7270-5-35 7270-5-35 - 35
7274-11-75 7274-11-71/2 MS22073-7.5 7.5 7271-3-3 7271-3-3 MS24510-B-3 3
7274-11-10 7274-11-10 MS22073-10 10 7271-3-5 7271-3-5 MS24510-B-5 5
7274-11-15 7274-11-15 MS22073-15 15 7271-8-3 7271-8-3 MS24510-A-3 3
7274-11-20 7274-11-20 MS22073-20 20 7271-8-5 MS24510-A-5 MS24510-A-5 5
ACCESSORIES 7271-8-7.5 7271-8-7 1/2 MS24510-A-7 1/2 7.5
7274-2-NUT 7274-2-NUT 7274-2 series hardware 7271-8-10 7271-8-10 MS24510-A-10 10
29007-11 29007-11 7274-11 series nut & washer 7271-8-15 7271-8-15 MS24510-A-15 15
7271-8-20 7271-8-20 MS24510-A-20 20
7271-8-25 7271-8-25 MS24510-A-25 25
7271-8-30 7271-8-30 MS24510-A-30 30
7271-8-35 7271-8-35 MS24510-A-35 35
7270 & 7271 SERIES 7271-8-50 7271-8-50 - 50
KLIXON
Klixon 7270 and 7271 series circuit breakers use less
space behind the panel while protecting wire and cable in
aircraft and ground support equipment on 120 VAC, 400 Hz
or 30 VDC systems. The Klixon disc element is resistant 15TC SERIES
to shock and vibration and can be calibrated within close KLIXON
tolerances throughout the service life of the breaker. EDMO# 15TC30-50
• Trip-free operation 7270-1 MFR# 15TC30-50
• Snap-acting thermal element The KLIXON three-phase 15TC series circuit
• Small size and lightweight breaker was designed to meet the package size
and performance requirements of inactive military
• MIL-C-5809 qualified standard MS90351 in the 20 to 50 amp range.
• High interrupting capacity This lightweight, high performance, non-ambient
• Available with neck mounting (7270-1 and 7271-8 devic- temperature compensated breaker is well suited for
es) or standard cover plate (7270-7 and 7271-3 devices) aircraft, avionics and electrical systems.
• Typical use: aircraft and ground support equipment • Non-ambient compensated
7271-8 • Trip–free design
• Current rating: 20 to 50 amps
KLIXON
Vibration: 10 G minimum
EDMO# 6TC2-2 80–500 Hz (other vibration levels available)
MFR# 6TC2-2
Mechanical shock: 50 G
The 6TC2 Series ambient compensated cir- Acceleration: 10 G
cuit breakers provide a three-phase design Interrupt current: 20–50 amps: 4000 amps at 28 VDC
in a lightweight and miniature package. The 20–50 amps: 2000 amps at 115 VAC, 400 Hz
three-phase design integrates each individ- Endurance: 2500 cycles: 115 VAC, 400 Hz inductive
ual phase to provide over current protection 2500 cycles: 28 VDC inductive
in the event of simultaneous or unbalanced 2500 cycles: 28 VDC resistive
overloads including short circuit protection. 5000 cycles: Mechanical, no load
The 6TC series are compatible with the
single phase 2TC and 3TC counter parts.
The 6TC circuit breakers are available in
ratings from 1 amp to 35 amp with military
and commercial approval on most styles. 5TC7 SERIES
• Protective shielding between each phase terminal KLIXON
• Pads for increased mounting security The 5TC series encompasses 20-50 amp, single-phase,
• Ambient temperature compensation miniature ambient compensated breakers. Ambient compen-
sated circuit breakers permit system designers to specify
• Trip-free design
smaller gauge wire where the circuit breaker and wiring are
• High short circuit capacity exposed to varying temperatures. Provides current ratings
from 20 to 50 amps.
• Miniature size and lightweight
Weight: 65 g, max. • Single–phase
Dimensions: 1.84 x 1.381 x 0.781 in, max. • Ambient compensated
Current Rating: 2 Amps
• Trip–free design
Vibration: 10G, minimum (50–500Hz) 5TC7-25
• High vibration resistance & high interrupting capacity
Mechanical shock: 50G
Acceleration: 10G • Options include: standard or auxiliary switch configuration, terminal barriers
Interrupt current: 2–20 amps: 2000 amps at 120 VAC, 400 Hz • Typical use: Aircraft, avionics and electronic systems
15–35 amps: 2000 amps at 120 VAC, 400 Hz
Endurance: 2500 cycles: 120 VAC, 400 Hz (inductive)
5000 cycles: 120 VAC, 400 Hz (resistive)
5000 cycles: mechanical, no load Weight: Standard device:
Qualifications: MS14154 53 grams (no hardware),
58 grams (hardware)
Auxiliary device:
55 grams (no hardware),
59 grams (hardware)
Current rating: 20 to 60 amps
5TC50 SERIES Vibration: 10 G minimum
KLIXON 80–500 Hz (other vibration levels available)
EDMO# 5TC50-50 Mechanical shock: 50 G
MFR# 5TC50-50 Acceleration: 10 G
The 5TC series encompasses 20-50 amp, single-phase, Interrupt current: 20–50 amps: 4000 amps at 28 VDC
miniature ambient compensated breakers. Ambient 20–50 amps: 2000 amps at 115 VAC, 400 Hz
compensated circuit breakers permit system designers Endurance: 2500 cycles: 115 VAC, 400 Hz inductive
to specify smaller gauge wire where the circuit breaker 2500 cycles: 28 VDC inductive
2500 cycles: 28 VDC resistive
and wiring are exposed to varying temperatures. Provides 5000 cycles: Mechanical, no load
current ratings from 20 to 50 amps.
• Miniature size and lightweight
• Single–phase
EDMO# MFR# AMP RATING
• Ambient compensated
5TC7-25 5TC7-25 25
• Trip–free design
5TC7-40 5TC7-40 40
• High vibration resistance & high interrupting capacity 5TC7-50 5TC7-50 50
• Options include: standard or auxiliary switch configuration, terminal barriers 5TC7-60 5TC7-60 60
Auxiliary device:
55 grams (no hardware),
59 grams (hardware)
Current rating: 20 to 50 amps
3TC14 SERIES
1
KLIXON
Current rating: 5 to 35 amps
The 3TC series encompasses 15-35 amp, sin- Vibration: 10 G
gle-phase, miniature ambient compensated breakers.
Mechanical shock: 30 G at peak
Ambient compensated circuit breakers permit system
designers to specify smaller gauge wire where the Acceleration: 10 G
circuit breaker and wiring are exposed to varying Interrupt current: 1–20 amps: 6,000 amps at 28 VDC
25 amps: 1,625 amps at 28 VDC
temperatures. Their ratings are coordinated so that, in 3–15 amps: 2,500 amps at 120 VAC, 400 Hz
the event of a fault of up to 6,000 amps let–through 20 amps: 2,000 amps at 120 VAC, 400 Hz
current, any rating will trip before another circuit 25 amps: 1,800 amps at 120 VAC, 400 Hz
breaker twice its rating. This results in improved 15–35 amps: 2,000 amps at 120 VAC, 400 Hz
overall equipment performance since only the small- Endurance: 2,500 cycles: 120 VAC, 400 Hz inductive
5,000 cycles: 120 VAC, 400 Hz resistive
est faulted circuit is interrupted, while larger circuits 2,500 cycles: 30 VDC, 400 Hz inductive
remain operational. Provides current ratings from 15 5,000 cycles: 30 VDC, 400 Hz resistive
to 35 amps. 3TC14-30
• Trip-free design
• AS58091 qualified (MS25244)
EDMO# MFR# MIL-SPEC AMP RATING
• High vibration resistance & high interrupting capacity
3TC7-5 3TC7-5 MS25244-5 5
• Typical use: Where ambient temperature exceeds the 160F (71C) maximum
3TC7-7.5 3TC7-7 1/2 MS25244-7.5 7.5
of non-ambient compensated thermal circuit breakers
3TC7-10 3TC7-10 MS25244-10 10
3TC7-15 3TC7-15 MS25244-15 15
3TC7-20 3TC7-20 MS25244-20 20
Weight: 36 grams maximum 3TC7-25 3TC7-25 MS25244-25 25
Current rating: 15 to 35 amps 3TC7-30 3TC7-30 MS25244-30 30
Vibration: 10 G minimum 3TC7-35 3TC7-35 MS25244-35 35
50–500 Hz (other vibration levels available)
Mechanical shock: 50 G
Acceleration: 10 G
Interrupt current: 15–35 amps: 6,000 amps at 28 VDC
15–35: 2,000 amps at 120 VAC, 400 Hz
25 amps: 1,800 amps at 120 VAC, 400 Hz 3TC2 SERIES
Endurance: 2,500 cycles: 120 VAC, 400 Hz inductive KLIXON
5,000 cycles: 120 VAC, 400 Hz resistive
2,500 cycles: 30 VDC inductive The 3TC series encompasses 15-35 amp, single-phase,
5,000 cycles: 30 VDC resistive miniature ambient compensated breakers. Ambient com-
10,000 cycles: mechanical, no load
pensated circuit breakers permit system designers to
specify smaller gauge wire where the circuit breaker and
wiring are exposed to varying temperatures. Their ratings
are coordinated so that, in the event of a fault of up to
EDMO# MFR# AMP RATING 6,000 amps let–through current, any rating will trip be-
3TC14-30 3TC14-30 30 fore another circuit breaker twice its rating. This results
3TC14-35 3TC14-35 35 in improved overall equipment performance since only
the smallest faulted circuit is interrupted, while larger
• circuits remain operational. Provides current ratings
from 15 to 35 amps.
3TC2
• Miniature size and lightweight
3TC7 SERIES • Trip–free design
KLIXON • High vibration resistance & high interrupting capacity
The Klixon 3TC7 style circuit breakers are single-phase, • AS58091 qualified (also: military approvals, FAA PMA)
non-ambient compensated circuit breakers that provide
high short circuit interrupting capacity. The series features • High interrupting capacity
a trip–free design that prevents the circuit breaker from • Typical end use: aircraft power distribution systems
being closed manually on overloads.
• Miniature size and lightweight
• Trip-free design Weight: 36 grams max.
• AS58091 qualified (MS25244) Current rating: 15 to 35 amps
• High vibration resistance Vibration: 10 G minimum
50–500 Hz (other vibration levels available)
• High interrupt capacity: interrupting a 6,000A circuit at Mechanical shock: 50 G
3TC7
30VDC, or Acceleration: 10 G
3,500A circuit at 120VAC, 400 Hz
Interrupt current: 15–35 amps: 6,000 amps at 28 VDC
• Typical use: aircraft, avionics and electrical systems 15–35: 2,000 amps at 120 VAC, 400 Hz
Endurance: 2,500 cycles: 120 VAC, 400 Hz inductive
5,000 cycles: 120 VAC, 400 Hz resistive
2,500 cycles: 30 VDC inductive
Weight: 38.9 grams 5,000 cycles: 30 VDC resistive
10,000 cycles: mechanical, no load
*continued on next page
EDMO# MFR# MIL-SPEC AMP RATING EDMO# MFR# MIL-SPEC AMP RATING
1
1
E-T-A
W58-1 3-1393249-9 1
These single-pole, high performance thermal circuit break- W58-2 4-1393249-2 2
ers have a tease-free, trip-free, snap action mechanism
W58-3 4-1393249-5 3
and push/pull, on/off manual actuation. An indicator
band on the push button displays the tripped/off position. W58-4 4-1393249-8 4
Threadneck panel mounted and available in tracked W58-5 4-1393249-9 5
vehicle, aircraft, and general- purpose versions. W58-7 5-1393249-0 7
• Push/pull-on/off actuator W58-10 4-1393249-0 10
W58-15 4-1393249-1 15
• Screw terminals
W58-20 4-1393249-3 20
• Threadneck panel mount
W58-25 4-1393249-4 25
• Black finish for aircraft application 413K14LN25 W58-30 4-1393249-6 30
ACCESSORIES
55-001B 55-001B Hex nut
Current rating: 30 to 90 A (-LN2/-N2)
Voltage: DC 28 V
AC 115 V (400 Hz)
Typical life: 3,000 operations at 1 × 1N
Insulation coordination:
(IEC 60664 and 60664A)
Rated impulse
Withstand voltage
W31 SERIES
1.5 kV TE CONNECTIVITY
Pollution degree 3
Thermal circuit breakers with a toggle actuator.
Dielectric strength: Test voltage AC 1,500 V
(IEC 60664 and 60664A) • Single pole, toggle
Operating area • Trip-free operation
Insulation resistance: >100 MΩ (DC 500 V)
Interrupting capacity Icn: 6,000 A • Termination type: 8-32 screws 90° to each other
Interrupting capacity: 6,000 A (UL1077) (screws and washers installed)
Degree of protection: operating area IP40, terminal area IP00 (IEC 60529/DIN
40050)
Ambient temperature: -55 to +75 °C (-67 to +167 °F)
W31-10
EDMO# MFR# AMP RATING
412K14LN-5 412-K14-LN2-5A 5
Weight: < 2 oz
K14LN2-40 413-K14-LN2-40 40
Interrupt current: 0.5–50 amps: 1000 amps at 240 VAC
K14LN2-50 413-K14-LN2-50A 50 30–50 amps:1000 amps at 50 VDC
K14LN2-60 413-K14-LN2-60 60 Operating voltage, max: 50 VDC or 240 VAC (to 400 Hz)
K14LN2-70 413-K14-LN2-70A 70 Endurance: > 6,000 cycles at 100% of rating or 10,000 mechanical
K34LN2125A 452-K34-LN2-125A 125 cycles
TE CONNECTIVITY KLIXON
Thermal circuit breakers with push/pull actuators and a These color-coded circuit breaker caps can be easily installed and removed
visible trip indicator band. from Klixon and similar circuit breakers. The colored caps designate circuit
• Single pole, push/pull breakers for flight check and other purposes. In addition, the caps greatly
improve grip and don’t shake loose and rattle like other caps.
• Visible trip indicator band
• Available in 8 colors
• Trip free operation
• FAA-standard “Maintenance Support Hardware” approved
• Termination type: 8-32 screws 90° to each other
(screws and washers installed)
EDMO# MFR# COLOR
W23-25 PE7000-1 PE7000-1 White
1
AGC-8 0AGC008.V 8
AGC-10 OAGC010.V 10
AGC-15 0AGC015.V 15
AGC-20 AGC-20 20 FHP-1 FNY-1 3453LF2A
AGC-25 0AGC025.V 25
AGC-30 0AGC030.V 30 EDMO# MFR# DESCRIPTION
AGC-35 0AGC015.V 35 FHP-1 0FHP001Z Universal glass bayonet knob in-line fuse
holder
FNY-1 0FNY0001ZXJ Twist lock in-line fuse holder
155020U 01550020ZXU Unassembled fuse holder
3453LF2A 03453LF2X Panel mount fuse holder
SLO-BLO GLASS FUSES 342024 342024 Panel mount fuse holder for AG, F02, and F03
fuse types | 30 A & 250 V
LITTELFUSE INC
The Slo-Blo® fuses provide cost-effec-
tive, reliable individual protection for
components and internal circuits. The
Slo-Blo fuses eliminate guesswork and
time-consuming circuit testing; when V313-5 RELAY/MS24178-D1
an overcurrent occurs, the fuse catalog EDMO# 6041H219
number with the suffix “ID” is easy to identify upon the fuse opening with a MFR# 6041H219
discoloration of its glass body. This continuous duty, gasketed, powered
• 313 series are time-delay fuses that open after a few seconds of over relay has a non-latching solenoid design
current conditions and operates at 28 VDC at 55 amp
current.
• Users can easily identify fuses after they’ve opened by the discoloration of
their glass bodies
• Provide superior protection for inductive loads such as motors, transform-
ers, and solenoids
• Sold in quantities of five
• Voltage rating: 250
SERVICE
FAST-ACTING GLASS FUSES
LITTELFUSE INC
EDMO# 312010P
MFR# 312010P
The 312 Series 3AG are Fast-Acting
fuses that solve a broad range of
application requirements while
offering reliable performance and
cost-effective circuit protection.
• In accordance with UL Standard 248-14
• RoHS compliant and Lead-free
• Cartridge style
1
GUARDIAN AVIONICS TRUE BLUE POWER
The smartPower 250 series is a AC outlets from True Blue Power offer
panel-mount USB type-A charging port pilots, passengers, and crew convenient
designed to provide reliable power in access to accessory power. Available
the cockpit for mobile devices such as in either North American and Universal
smartphones and tablets. The "smart versions, they provided up to 15 amps of
charging" feature adjusts the output am- power and can be easily mounted in the
perage to meet the power requirements cabin, cockpit, and galley.
of the unit being charged reducing the • Rated up to 15 amps per outlet
risk of overheating or overcharging.
Also, included are green LED backlit • Compatible with True Blue Power and
ports for night flying conditions, EMI industry standard 115 VAC and 230 VAC inverters
shielding to eliminate interference,
and reverse polarity protection. The 250-101 Single Round
smartPower provides 2.7 amps at 5 Weight: 0.30 lb
VDC (12 watt) for each USB port. The
Dimensions: 1.75 x 1.75 x 1.70 in
power supply is designed to be small
and unobtrusive and is available with Case: Aluminum
two different faceplate styles: a round Compatible Inverters: TI250, TI500, TI1200, TI2000
faceplate to fit into a standard cigarette
lighter socket panel cutout, and a square
faceplate for custom panel cutouts.
These USB chargers are available in sin- EDMO# MFR# PLUG TYPE INPUT OUTPUT
gle or dual USB port configurations: the VOLTAGE CURRENT
single port model features one USB port 9018708-1 9018708-1 North American 115 VAC @ 60 Hz 15A (rated)
in front and an Apple Lightning™ cable in 9018708-2 9018708-2 Universal 115 VAC @ 60 Hz 14A (rated)
the rear, while the dual port version has 230 VAC @50 Hz
250-101 Dual Square
two USB type-A connectors in front.
• Keeps USB charged devices powered including smartphones, tablets, GPS
units, and cameras
• Green LED back-lit ports for easier use in night flying conditions
• EMI shielding eliminates interference 115V AC POWER OUTLET
DEKLIN TECHNOLOGIES, INC
• Reverse polarity protection
EDMO# Q227-115
• Approved for installation in CFR Part 23 aircraft and Part 27/29 rotorcraft MFR# Q227-115
as Non-Required Safety Enhancing Equipment (NORSEE), requiring only a
Panel mounted 125 VAC, 15 amp power
logbook entry as a minor alteration
outlet designed for panel 0.8-inch to 2-inch
in thickness.
Weight: 2.6 oz
Dimensions: 1.5 x 1.5 x 2.1 in
Input current: 9–48 VDC
Output current: 2.7 A per USB port
Output voltage: 5 VDC ± 0.25 per port (12 watt)
CIGARETTE LIGHTER SOCKET 12 & 24 VDC
DEKLIN TECHNOLOGIES, INC
EDMO# MFR# DESCRIPTION CUTOUT Cigarette lighter sockets
constructed with glass-filled,
SINGLE USB high-temperature, nylon plas-
250-101R 250-101R Type-A front Round tic parts with a temperature
Apple Lighting rear rating of 257°F. The sockets’
250-101S 250-101S Type-A front Square metal current-carrying
Apple Lighting rear capacity part are 0.032-inch
DUAL USB copper alloy for maximum
250-101RD 250-101RD Type-A front Round conductivity and nickel-plated for corrosion resistance.
250-101SD 250-101SD Type-A front Square • 0.25-inch quick connect tabs
ACCESSORIES • Front or rear mount
ADAPT-USB ADAPT-USB 2.25-inch, panel mount instrument adapter • Provided with plastic alloy cap to seal receptacle when not in use
SWITCHES
1
1
TABLE 2. PUSH BUTTON CAP ASSEMBLY COMPONENTS
17001 17001 Dress bezel for switch terminations
17002 17002 Faceplate seal; holds faceplates and sits inside the bezel
17003 17003 Non-reflective faceplate
17007 17007 Textured faceplate
17008 17008 Filtered diffuser (2 ea.)
TABLE 3. TOOLS
15193 15193 Extraction tool for remove pushbuttons from switch/indicator assemblies.
ASSEMBLY INFORMATION
The following diagrams explain the Staco AV17 switch components shown on the previous pages. To order a custom switch use EDMO’s switch order form on the
following page.
DATE:
COMPANY:
YOUR NAME:
PHONE:
FAX:
1 2 3 4 5 6 7 8
5) Legend color(s): 0 = clear white 4 = lunar white
1 = red 5 = lemon yellow
Draw the display style you have selected 2 = green 6 = blue
and include the color number in each 3 = amber yellow
segment
6) Custom legend:
TEXT NOTE
Full screen, maximum of (4) lines with (7) characters per line.
Full screen, horizontal, maximum of (2) lines with (7) characters per line.
Full screen, vertical, maximum of (2) columns with (7) characters per column.
Half screen, maximum of (2) lines with (4) characters per line.
1
EATON
The 582 Series can be used in commercial and military aircraft and was designed with custom input, focusing on reliability, low weight, short-behind-the-panel-
depth, sunlight readability, night vision imaging compatibility, LED illumination, spray-tight sealing, and plug-in mounting. Qualified to MIL-S-22885/101.
• Mounting can and bulbs required for installation
• 582 Cap assembly sold separately, call for part number and pricing
• EDMO order form can be used for Eaton switch orders
EDMO# MFR# LIGHTING OPTION SEAL & RFI OPT. SWITCH ACTION / LAMP CIRCUIT
TERMINATION
58210A0B0C 582-10A0B0C3 T-1 Lamp, basic capsule Unsealed Indicator/plug-in Horizontal split, dual ground
58210A2B0C 58210A2B0C3 -1 Lamp, basic capsule Unsealed 2PDT momentary switch/plug-in Horizontal split, dual ground
58210A4B0C 582-10A4B0C3 -1 Lamp, basic capsule Unsealed 2PDT alternate switch/plug-in Horizontal split, dual ground
ACCESSORIES
58T-101 58T-101 Lamp capsule removal tool for Eaton switches
58T-107 58T-107 Connector block removal tool for Eaton switches
58A-104 58A-104 Clear plastic switchguard
58T-101 58T-107
15089 15089 Lens guard assembly
SM-4
Environmentally sealed toggle switches that are completely protected from dust, moisture, and other contaminants.
• 1-, 2-, and 4-pole circuitry • Thermoset molding materials meet flame retardant requirements
• 2- and 3-position with maintained and momentary action • Bushing: 15/32 inch – 32 thread / 0.690-inch toggle
• Molded-in terminal inserts and terminal numbers • Temperature range: -68°F to 160°F
• MS approved and QPL’d per MIL-S-3950 • Life: 20,000 operations at rated load, 40,000 operations mechanical life
4 POLE
8502K3 8502K3 MS24525-31 ON OFF ON*
8502K9 8502K9 MS24525-22 ON NONE OFF
*Momentary contact
1
Environmentally sealed lever lock switches. Each switch is completely protected from dust, moisture, and other contaminants.
• 1-, 2-, and 4-pole circuitry • MS approved and QPL’d per MIL-S-3950
• 2- and 3-position with maintained and momentary action • Thermostat molded materials meet flame retardant requirements
• Locking actuator for safety • Bushing: 15/32 inches with 32 thread / 0.470-inch toggle
• Molded-in terminal inserts and terminal numbers • Temperature range: -85°F to 160°F
• Environmentally sealed per MIL-S-3950 • Life: 20,000 operations at rated load; 40,000 operations mechanical life
2 POLE
8504K6 8504K6 MS24659-23D D ON NONE ON
8504K10 8504K10 MS24659-22D D ON NONE OFF
4 POLE
8505K1 8505K1 MS24660-21A A ON OFF ON
AC rated, military purpose toggle switches have a silicone rubber seal around the lever and meets MIL-S-83731 requirements. The seal will resist entry of con-
taminants such as dust, sand or water into the contact structure. The metal parts are plated for corrosion resistance. The heavy duty switches are offered in both
standard toggle level and level lock versions.
*Momentary contact
1
Miniature locking toggle switches for telecommunications, instrumentation, or medical equipment. The 7000 series offer a variety of actuator and termination
options. The epoxy terminal-seal is compatible with bottom wash cleaning.
• Silver-plated with an epoxy terminal seal
• Solder lug termination
*Momentary contact
The MTA and MTL miniature toggle switches are design for panel mount applications.
• MTA series have 0.410-inch long round toggles, 1/4-40 bushing
• MTL series have 0.270-inch long round toggle, 1/4-40 bushing
• Materials: contacts — copper alloy silver clad gold finish; actuator — brass nickel-plated; terminal seal — over molded; case — alkyd polyester; frame — stainless
steel; support bracket — steel nickel-plated
• Wire lug termination
1
The Micro Switch TL Series toggle switches are sealed to military specifications, MIL-DTL-3950 and feature a bonded seal between the toggle lever and bushing as
well as between the cover and case. The robust design makes the 2TL1 series ideal for many military and aerospace applications where reliability is critical. These
switches are designed for applications in environments where the panels are subjected to mechanical shock, vibration, and temperature extremes as well as envi-
ronments with dust, splashing or hose-directed water. The 2TL1 series toggle switches offer a wide variety of circuitry and pole options. Constructed for military
and aerospace applications, the TL Series provides reliable performance and a long operating life under tough conditions.
*Momentary contact
SWITCH GUARDS
1
849 SERIES
Switch guards prevent accidental operation of switches by limiting switch operation
to select functions. The guards can be adapted to one-, two-, and four-pole configu-
rations. One-hole or flush-mounted variations.
• For use with 2- or 3-position switches
• Various colored thermoset molded & metal covers 8492K1 8494K2 8499K1
• MS approved and QPL‘d per MIL-G-7703
• Guard covers are spring loaded to either close or lock in open position
• Keyway orientation variations offered on some guards
EXPLANATION OF CODES
2,10, 11, and 12 3, 13, and 14
for full throw single throw switches for three-position switches
returns lever to OFF position returns lever from up position to center position
will not change toggle position when it is in down position
4 and 5 6 and 15
for two-position full throw switches insertion of pin through guard prevents accidental operation
permits locking toggle in extreme up position prevents transfer of single throw switches
permits operation from first position to center on three-position switches
7 and 8
for three-position switches
returns lever to center position from either extreme
guard housing remains fixed in open and closed position
Call or visit edmo.com for parts not shown.
EDMO# MFR# MIL P/N CODE SWITCH MOUNTING/POSITIONS LEVER MATERIAL/COLOR KEYWAY TAB LOCATION
8492K1 849K1 MS24417-1 15 --/2 or 3 Metal/black Opp. Pin hole
8494K2 8494K2 MS25214-2 7 OHM/3 Phenolic/red Opp. Hinged end
8495K1 8495K1 MS25221-1 6 Flush or OHM/2 or 3 Metal --
8496K2 8496K2 MS25223-2 9 OHM/3 Phenolic/red Opp. Hinged end
8497K1 MS25224-1 MS25224-1 10 OHM/2 Phenolic/red Opp. Hinged end
8497K2 8497K2 MS25224-2 2 Flush/2 Phenolic/red --
8497K3 8497K3 MS25224-3 11 --/2 Phenolic/red Hinged end
8498K6 MS27752-1 MS27752-1 16 OHM/2 or 3 Phenolic/red Opp. Hinged end
8499K1 8499K1 MS25452-1 4 Flush/2 Metal/green --
400 SERIES
Switch guards for MSP Aviation are rugged and highly durable that exceed cus-
tomers’ requirements for reliability. Switch guards prevent the inadvertent activa-
tion of toggle switches by the aircraft operator such as preventing the activation
of fire suppression system or emergency locator transmitter (ELTs).
EDMO# MFR# SWITCH STYLE FLIPPER CLOSING OPENING GUARD POSITION KEYWAY COLOR
GUARD GUARD LOCATOR
400-111 400-111 2 position Yes Down pos. No effect Opened or closed 6 o’clock Red
400-112 400-112 2 position Yes Down pos. No effect Remains open or closed 6 o’clock Black
400-122 400-122 2 position Yes Down pos. No effect Remains open or closed 12 o’clock Black
403-111 403-111 2 position No No effect No effect Remains open or closed 6 o’clock Red
403-112 403-112 2 position No No effect No effect Remains open or closed 6 o’clock Black
404-112 404-112 2 position Yes Down pos. No effect Remains open or closed 6 o’clock Black
405-111 405-111 2 position No No effect No effect Remains open or closed 6 o‘clock Red
405-122 405-122 2 position No No effect No effect Remains open or closed 12 o’clock Black
401-112 401-112 3 position Yes Up-center pos. No effect Remains open or closed 6 o’clock Black
401-122 401-122 3 position / momentary down Yes Up-center pos. No effect Remains open or closed 12 o’clock Black
402-112 402-112 3 position Yes Up-down-center pos. No effect Remains open or closed 6 o’clock Black
406-112 406-112 3 position Yes Down pos. No effect Remain opens or closed 6 o’clock Black
408-112 408-112 3 position Yes Up-center pos. No effect Remains open or closed 6 o’clock Black
1
BUS BARS 27212-3-2
27212-3-3
MS27212-3-2
MS27212-3-3
2
3
27212-3-4 MS27212-3-4 4
27212-3-5 MS27212-3-5 5
TERMINAL BLOCKS 27212-3-6 MS27212-3-6 6
These terminal blocks are molded in high quality, dimensionally stable DAP 27212-3-8 MS27212-3-8 8
thermoset material, providing excellent dielectric strength, even at high tem-
peratures and in moist environments. They can be cut to length to accommo-
date any job.
• Constructed with diallyl isophalate plastic (per Federal standard GDI-20F and
MIL-M-14) 27212-4
• Operating temperature: 425°F to 500°F max. • Stud thread size/max available: 5/16 x
24 UNF-2A
• Compatible with MS180029 terminal block covers and MS252226 bus bars
• 1.392 x 1.50 (1.5 in stud spacing)
27212-1
• Stud thread size/ max available: 6-32 EDMO# MFR# # OF STUDS
UNC-2A/20 27212-4-2 MS27212-4-2 2
• 0.953 x 0.688 in (0.594 in stud 27212-4-3 MS27212-4-3 3
spacing)
Designed to be compatible with Cover assemblies of MS27212 terminal blocks. Constructed with plastic lami-
MS27212 terminal blocks, these bus nate material per MIL-P-15518 type I. Operating temperature: 475°F
bars consist of parallel plates of
conductors bonded together and sep- 18029-1S
arated be a thin layer of insulation: • Stud size: 6-32
they provide low inductance, high
capacitance, and ease of assembly. • Cover type/nut: S/MS18029-21
Ideal for system integration where high power switching, such as IGBTs are
involved. EDMO# MFR# # OF STUDS
• Can be cut to length for specific applications 18029-1S-3 MS18029-1S-3 3
18029-1S-4 MS18029-1S-4 4
MS27212-1 18029-1S-5 MS18029-1S-5 5
• Max capacity: 40 amps 18029-1S-6 MS18029-1S-6 6
18029-1S-7 MS18029-1S-7 7
EDMO# MFR# # OF STUD SIZE PLATING 18029-1S-8 MS18029-1S-8 8
STUDS MATERIAL 18029-1S10 MS18029-1S-10 10
25226-2-2 MS25226-2-2 2 6-32 Cadmium 18029-1S12 MS18029-1S-12 12
25226-2-3 MS25226-2-3 3 6-32 Cadmium 18029-1S15 MS18029-1S-15 15
25226-2-4 MS25226-2-4 4 6-32 Cadmium 18029-1S20 MS18029-1S-20 20
25226-2-5 MS25226-2-5 5 6-32 Cadmium
25226-2-6 MS25226-2-6 6 6-32 Cadmium
25226-2-8 MS25226-2-8 8 6-32 Cadmium
25226-2-10 MS25226-2-10 10 6-32 Cadmium
18029-2S
25226-2-16 MS25226-2-16 16 6-32 Cadmium
• Stud size: 10-32
25226-2-20 MS25226-2-20 20 6-32 Cadmium
• Cover type/nut: S/MS18029-22
1
MFR# 1546671-6
Dual barrier strip with two walls molded
onto each side of the terminal screw. This
strip is east to install with backed-out,
wire-ready screws that have an interrupted
thread designed to prevent screws from
falling out. Stand-offs allow flux and 14-pin gndg block 14-pin receptacle 34-pin gndg block 34-pin receptacle
solvents to drain during cleaning.
For installing grounding wire to an aircraft frame, the 14-pin grounding block
mates with standard 6,14-, or 34-position connector housings and has a size
16 screw-machined pin contacts that are stacked, riveted, and soldered into
Centerline/length: 0.4375 in / 3.380 in (85.85 mm) the L-shaped metal bracket. Tin-plated brass construction with stainless steel
# of positions/screw size: 6 positions / 6-32 x 1/4 clinch nuts and phosphor bronze gold over nickel-plated pin contacts.
Current rating/wire range: 25 A / 22–14 AWG
Block/screw material: Thermoplastic/steel EDMO# MFR# # OF MATERIAL CONNECTOR
POSITIONS
GROUNDING BLOCKS - PIN CONTACT TYPE
201355-1 201355-1 14 Phenolic GF cable-to-cable,
housing cable-to-panel
SOCKET JUNCTION MODULE
This MIL-T81714 Series I Class D Terminal 203540-1 203540-1 14 Tin-plated brass cable-to-cable
plate, gold/nickel-
Junction System is QPL-approved and consists plated phosphor
of modules available in various sizes that bronze contacts
accommodate 12 AWG to 26 AWG wires in both 204814-1 2048141 34 Tin-plated brass cable-to-cable
feedback and feed-thru types including a full plate, gold/nickel-
selection of bussing arrangements. The complete plated phosphor
MIL-T-81714 Series I terminal junction system bronze contacts
includes feedback/feed-thru modules, electronic RECEPTACLES - SOCKET CONTACT TYPE
modules, ground modules, single and dual in-line splices, and mounting tracks. 201298-1 2012981 14 Phenolic GF cable-to-cable,
housing panel-to-panel
• The split socket design conforms to the mating pin diameter to maximize
mating surfaces of the pin and socket
200838-2 2008382 34 Phenolic GF cable-to-cable,
• High density modules conform to MIL-T-81714/17 performance require- housing panel-to-panel
ments and accept 21 size 22 contacts in a compact 3x7 configuration with a
wide verity of bus arrangements
• TJSE electronic modules can be supplied with a wide variety of diodes,
resistors, capacitors, and fuses with in the spice itself allowing customers to
incorporate system modules into a wire bundle
PINS FOR GROUNDING BLOCKS
EDMO# MFR# DESCRIPTION
EDMO# MFR# AWG FINISH
SOCKET JUNCTION MODULE
66099-1 66099-1 18-16 Brass/gold
M81714/672 M81714/67-2 2 position / series II
M81714- M81714/60-20-01 12 position / series II / size 20 66099-4 66099-4 18-16 Brass/gold
M817146020 M81714/60-20-03 12 position / series II / size 20 66103-1 66103-1 24-20 Brass/gold
M81714/60 M81714/60-22-04 20 position / series II / size 22 66103-4 66103-4 24-20 Brass/gold
M817146022 M81714/60-22-05 20 position / series II / size 22
Sold in quantities of 100.
TERMINAL JUNCTION MODULE
M8171417D3 M81714/17-D33 feedback type / accepts 22, 26 AWG wire size
RACK ASSEMBLY
M817145-4 M81714/5-4 feedback type mounting track / 5 mounting
SOCKETS FOR GROUNDING BLOCKS
pos. / 3.34 x 2.84
EDMO# MFR# AWG FINISH
66101-1 661011 18-16 Brass/gold
66101-4 661014 18-16 Brass/gold
2
MIL-SPEC M22759 WIRE MIL-SPEC M22759 ETFE HOOK-UP WIRE
• (M22759/18, M22759/32—34, M22759/41-43) • QPL (Qualified Parts List) ETFE Hook-up Wire
• Airframe and avionics aerospace wire • Standard weight
• Soft annealed ten, silver or nickel-plated copper and alloy conductors
• Single layer and dual layer irradiated ETFE insulation EDMO# MIL-SPEC GAUGE COLOR
• Resists high PH cleaning fluids, fuels, lubricating oils and chemicals EXTRUDED ETFE INSULATION
TIN-PLATED COPPER CONDUCTOR
600V / 150°C RATING
EDMO# MIL-SPEC# GAUGE COLOR
0G/16-9 M22759/16-01-9 0 White
THIN-WALLED EXTRUDED ETFE INSULATION 2G/16-9 M22759/16-2-9 2 White
TIN-PLATED COPPER CONDUCTOR 4G/16-9 M22759/16-4-9 4 White
600V / 150°C RATING
6G/16-9 M22759/16-6-9 6 White
26G/18-0 M22759/18-26-0 26 Black
8G/16-0 M22759/16-8-0 8 Black
26G/18-4 M22759/18-26-4 26 Yellow
8G/16-9 M22759/16-8-9 8 White
26G/18-9 M22759/18-26-9 26 White
10G/16-2 M22759/16-10-2 10 Red
CROSSLINKED, MODIFIED ETFE INSULATION 10G/16-4 M22759/16-10-4 10 Yellow
TIN-PLATED COPPER CONDUCTOR
600V / 150°C RATING 10G/16-9 M22759/16-10-9 10 White
12G/16-0 M22759/16-12-0 12 Black
16G/32-9 M22759/32-16-9 16 White
12G/16-2 M22759/16-12-2 12 Red
18G/32-9 M22759/32-18-9 18 White
12G/16-9 M22759/16-12-9 12 White
20G/32-9 M22759/32-20-9 20 White
14G/16-0 M22759/16-14-0 14 Black
22G/32-9 M22759/32-22-9 22 White
14G/16-2 M22759/16-14-2 14 Red
24G/32-9 M22759/32-24-9 24 White
14G/16-9 M22759/16-14-9 14 White
CROSSLINKED, EXTRUDED, MODIFIED ETFE INSULATION &
POLYIMIDE BRAID 16G/16-0 M22759/16-16-0 16 Black
TIN-PLATED COPPER CONDUCTOR 16G/16-1 M22759/16-16-1 16 Brown
600V / 150°C RATING 16G/16-2 M22759/16-16-2 16 Red
4G/34-9 M22759/34-4-9 4 White 16G/16-3 M22759/16-16-3 16 Orange
8G/34-9 M22759/34-8-9 8 White 16G/16-4 M22759/16-16-4 16 Yellow
12G/34-9 M22759/34-12-9 12 White 16G/16-5 M22759/16-16-5 16 Green
14G/34-9 M22759/34-14-9 14 White 16G/16-6 M22759/16-16-6 16 Blue
16G/34-9 M22759/34-16-9 16 White 16G/16-7 M22759/16-16-7 16 Purple
18G/34-9 M22759/34-18-9 18 White 16G/16-9 M22759/16-16-9 16 White
20G/34-9 M22759-34-20-9 20 White 18G/16-0 M22759/16-18-0 18 Black
22G/34-9 M22759/34-22-9 22 White 18G/16-1 M22759/16-18-1 18 Brown
24G/34-9 M22759/34-24-9 24 White 18G/16-2 M22759/16-18-2 18 Red
DUAL LAYER IRRADIATED, CROSSLINKED, 18G/16-3 M22759/16-18-3 18 Orange
EXTRUDED ETFE INSULATION 18G/16-4 M22759/16-18-4 18 Yellow
NICKEL-PLATED COPPER CONDUCTOR 18G/16-5 M22759/16-18-5 18 Green
600V / 200°C RATING
18G/16-6 M22759/16-18-6 18 Blue
6G/41-9 M22759/41-6-9 6 White
18G/16-8 M22759/16-18-8 18 Grey
12G/41-9 M22759/41-12-9 12 White
18G/16-9 M22759/16-18-9 18 White
14G/41-9 M22759/41-14-9 14 White
20G/16-0 M22759/16-20-0 20 Black
16G/41-9 M22759/41-16-9 16 White
20G/16-1 M22759/16-20-1 20 Brown
18G/41-9 M22759/41-18-9 18 White
20G/16-2 M22759/16-20-2 20 Red
20G/41-9 M22759/41-20-9 20 White
20G/16-3 M22759/16-20-3 20 Orange
22G/41-9 M22759/41-22-9 22 White
20G/16-4 M22759/16-20-4 20 Yellow
DUAL LAYER IRRADIATION, CROSSLINKED, 20G/16-5 M22759/16-20-5 20 Green
EXTRUDED ETFE INSULATION
SILVER-PLATED COPPER CONDUCTOR 20G/16-6 M22759/16-20-6 20 Blue
600V / 200°C RATING 20G/16-7 M22759/16-20-7 20 Purple
4G/43-9 M22759/43-4-9 4 White 20G/16-8 M22759/16-20-8 20 Grey
12G/43-9 M22759-43-12-9 12 White 20G/16-9 M22759/16-20-9 20 White
16G/43-9 M22759/43-16-9 16 White 22G/16-0 M22759/16-22-0 22 Black
22G/16-1 M22759/16-22-1 22 Brown
22G/16-2 M22759/16-22-2 22 Red
22G/16-3 M22759/16-22-3 22 Orange
22G/16-4 M22759/16-22-4 22 Yellow
*continued on next page
LMR400 50 OHM BRAIDED COAX • RoHS compliant while passing FAA flammability requirements of FAR Part 23
EDMO# LMR400/1 and 25, Appendix F
MFR# TIMLMR400 • Skydrol resistant
LMR400 is a UV resistant, polyethylene • Tin-plated, copper braided shield | Foil shield
2
jacketed, 50Ω braided coax cable. This
cable is designed for outdoor exposure • Foam Fluoropolymer Outer insolation / solid PFA inner insolation
and has a life expectancy in excess of
20 years. The flexible outer conductor
enables the tightest bend radius available Weight: 27.5 lb/100 ft (3.7 kg/100 m)
for any cable of similar size and perfor-
Outer Diameter: 0.20 in (4.95 mm)
mance.
Impedance: 125Ω
Conductor 24 AWG stranded SPCA
Shield coverage: 100% (foil), 90% (braided)
Minimum Bend Radius: 1 in (25.4 mm)
Jacket Diameter: 0.405 in DC Resistance: 27.5Ω/1,000 ft (90.2Ω/1,000 m)
Jacket material: PE
Impedance: 50Ω
Frequency: 6 GHz, max.
Center conductor type: Solid / single strand
Dielectric type: PE MAXFLIGHT™ HIGH SPEED DIGITAL DATA BUS
Number of shields: 2 CABLE
Temperature: 85°C, max. EDMO# CAN24TST12
MFR# CAN24TST120
Maxflight™ high performance data bus
cables provide high speed data transpor-
tation for popular data bus protocols such
U COAXIAL CABLE as HDMI, DVI, USB, Firewire, and CAN bus.
This high-performance data bus cable is
RFW-5030, 5509, 5922 is a RG-58A coaxial designed to meet the needs the needs of the
cable type that comes in 25 or 50 foot lengths aerospace, defense, military, ground transpiration, industrial and RF com-
and is terminated with either BNC, TNC, or BNC munication markets. Ideal applications include ethernet backbone, avionics,
and TNC connectors. high-definition video, cabin management systems, in-flight entertainment, and
• Maximum frequency: 1 GHz data bus applications.
• Impedance: 50Ω • Exceptional electrical and mechanical performance
• Outer diameter: 0.195 in • Operating performance from -55°C to 200°C
• Meets requirements of aerospace and other harsh environments including
EDMO# MFR# CONNECTOR LENGTH FAR 25.853 flammability and Boeing/Airbus smoke and toxicity
RG-58A CABLE • Multiple configurations to meet the needs of almost any application
RFW5030300 RFW-5030-300 BNC to BNC 25 ft • Advanced technologies such as bonded-pairs and an innovative X-Web for
RFW5509300 RFW-5509-300 BNC to TNC 25 ft reduced cross-talk
RFW5922300 RFW-5922-300 TNC to TNC 25 ft
RFW5030600 RFW-5030-600 BNC to BNC 50 ft
RFW5509600 RFW-5509-600 BNC to TNC 50 ft Cable Weight: 14 lb/1000 ft (20 Kg/1000 m)
RFW5922600 RFW-5922-600 TNC to TNC 50 ft Cable Diameter: 0.142 in (20 mm)
Min. bend radius: 1.42 in (36 mm)
Impedance: 120Ω
Velocity of Propagation: 79%
Attenuation (dB/100 ft): 1 @ 1 MHz, 2 @ 6 Mhz, 2.7 @ 10 MHz
T12243 DATAMATES® TTP/ASCB DATA BUS Temperature range: Operating: -55°C to 150°C
CABLE Approvals: Meets FAR 25.853 & Boeing/Airbus Smoke and Toxicity
EDMO# T12243
MFR# T12243
T12243 Datamates® TTP/
ASCB Data Bus/CAN Bus cable
is approved by the Honeywell
Commercial Flight System Group.
This Databus cable has a single pair of 125Ω conductors that is approved for
the ASCB Data bus and Servo CAN Bus for the Primus EPIC/APEX Integrated WITH 50 YEARS OF EXPERIENCE IN
Avionics system. This Databus cable is designed to simplify the termination THE INDUSTRY, EDMO KNOWS QUALITY.
process, pin extraction, and improve the overall quality of the installation.
Dual-layer insulation allows this wire to meet specific impedance requirements Give us a call at 1.800.235.3300 or visit edmo.com for
while providing for easy pin extraction of the contact.
• Provides the primary interface for the Honeywell/Sperry SPZ-8000 DAFCS
parts and pricing.
which includes EFIS, AHRS and DADC
• Can be used with CAN Bus communications for the Honeywell/Sperry
Primus II Radio System
2
TST-BELTS TST-TB-110XL075 Replacement belts
CABLE TIES
TY-RAP CABLE TIES
2
2
• Turned-up tail allows the user to orient the tie as needed
• Can be applied by hand or with tensioning tools T18L T30R-0
CABLE CLAMPS
Adjustable 90° clamps for cable bundle diame-
ters from 1/8-inch to 2- 3/16-inch. They open at
a 90° angle for easy installation and accept wire
2
bundles of varying sizes — especially when used
in conjunction with plastic cable ties. Qualifies to
CABLE TIE MOUNTS Mil spec M23190/1.
HELLERMANNTYTON CORP
The CTM series of cable
tie mounts provide stability
to installed wire bundles.
These mounts accommo- EDMO# MFG# DIAMETER (IN)
date the T18 through T50
NMC1005-3 NMC1005-3 1/2 - 11/16
series cable ties.
NMC1005-4 NMC1005-4 11/16 -15/16
• Polyamide 6.6 construc-
NMC1005-5 NMC1005-5 7/8 - 1 1/4
tion
• Each mount is secured CTM-3-0 CTM-4
with a single #6 screw
• 100 mounts per package
WEDGED CABLE CLAMPS
EDMO# MFR# COLOR DIMENSIONS (IN) MOUNTING Cushioned loop clamps (Adel clamps) with an
HOLE (IN) aluminum body and chloroprene rubber cushion
FOR 18/50 LB CABLE TIES (black with blue stripe) with wedge.
CTM-0 CTM010C2 White 0.58 x 0.37 x 0.27 0.15
CTM-0-0 CTM00C2 Black 0.58 x 0.37 x 0.27 0.15
CTM-1 CTM110M4 White 0.58 x 0.37 x 0.27 0.19
CTM-1-0 CTM10M4 Black 0.58 x 0.37 x 0.27 0.19
FOR 18/120 LB CABLE TIES
CTM-2 CTM210M4 White 0.86 x 0.61 x 0.37 0.18
EDMO# MFR# DIAMETER (IN)
CTM-3 CTM310M4 White 0.86 x 0.61 x 0.37 0.2
CTM-3-0 CTM30C2 Black 0.86 x 0.61 x 0.37 0.2 MS21919WCH — WHITE
CTM-4 CTM410C2 White 0.86 x 0.62 x 0.37 0.25 21919WCH3 21919WCH3 3/16
MS21919WDG — BLACK/BLUE
21919WDG2 MS21919WDG2 1/8
21919WDG3 MS21919WDG3 3/16
21919WDG4 MS21919WDG4 1/4
CABLE TIE MOUNTS - 4-WAY 21919WDG5 MS21919WDG5 5/16
HELLERMANNTYTON CORP 21919WDG6 MS21919WDG6 3/8
These four-way mounting 21919WDG7 MS21919WDG7 7/16
cable tie bases accommo- 21919WDG8 MS21919WDG8 1/2
date several different sizes 21919WDG9 MS21919WDG9 9/16
of cable ties. Ties can be 21919WDG10 MS21919WDG10 5/8
inserted from all four sides 21919WDG11 21919WDG11 11/16
of the mount. Mounts can 21919WDG12 MS21919WDG12 3/4
be secured to intended 21919WDG13 MS21919WDG13 13/16
surfaces with two screws, MB-5A-0 MB-5A 21919WDG14 MS21919WDG14 7/8
adhesive backing, or both
if needed. 21919WDG15 21919WDG15 15/16
21919WDG16 MS21919WDG16 1
• Adhesive backing consists of synthetic rubber with a polyethylene foam and
synthetic rubber base 21919WDG17 MS21919WDG17 1-1/6
21919WDG18 MS21919WDG18 1-1/8
21919WDG19 MS21919WDG19 1-3/16
EDMO# MFR# COLOR DIMENSIONS (IN) MOUNTING 21919WDG20 MS21919WDG20 1-1/4
HOLE (IN)
21919WDG21 MS2191WDG21 1-5/16
FOR 18/30 LB CABLE TIES 21919WDG22 MS21919WDG22 1-3/8
MB-3A MB3A10M4 White 0.75 x 0.75 x 0.18 0.12 21919WDG23 21919WDG23 1-7/16
MB-3A-0 MB3A0C2 Black 0.75 x 0.75 x 0.18 0.12 21919WDG24 MS21919WDG24 1-1/2
FOR 18/50 LB CABLE TIES 21919WDG25 MS21919WDG25 1-9/16
MB-4A MB4A10H4 White 1.12 x 1.12 x 0.22 0.18 21919WDG26 MS21919WDG26 1-5/8
MB-4A-0 MB4A0H4 Black 1.12 x 1.12 x 0.22 0.18 21919WDG30 MS21919WDG30 1-7/8
FOR 18/150 LB CABLE TIES 21919WDG32 MS21919WDG32 2
MB-5A MB5A10F4 White 1.49 x 1.49 x 0.28 0.19
MB-5A-0 MB5A0C2 Black 1.49 x 1.49 x 0.28 0.19
HIX heat shrinkable polyolefin tubing is a general-purpose heat-shrinkable tubing, HIX tubing is used for insulating, jacketing, bundling, and identification. It is both
abrasion and solvent resistant and provides a longitudinal shrinkage of less than 6%.
RED — 100 FT
HIXR-1/8RE HIXR-1/8 0.125/0063 0.020
HIXR-1/4RE HIX-1/4 0.250/0.125 0.025
HIXR-1/2RE HIXR-1/2 0.500/0.250 0.025
2
GREEN — 100 FT
HIXR-3/8G HIX-3/8 0.375/0.188 0.025
Not finding what you need? Give us a call at 1.800.235.3300 or view our full inventory at edmo.com.
2
stain-relief and identification for wire ter- HAT-1/8 HAT-1/8 0.125/0.063 0.021
minals and electrical connections. HIX3X HAT-3/8 HAT-3/8 0.375/0.188 0.031
features a flame retardant, cross-linked HAT-3 HAT-3 3.000/1.500 0.050
material that may also provide for a light-duty jacketing material on a harness.
• Shrink ratio: 3:1
• Shrink temperature: 248°C
• Operating temperature range: -55°C to 135°C
HLT HEAT-SHRINKABLE POLYOLEFIN TUBING
EDMO# MFG# MIN. EXPANDED/ RECOVERED HLT tubing is heat-shrinkable, very flexi-
RECOVERED WALL ble thin-wall tubing made from flame-re-
WALL ID (IN) THICKNESS tardant polyolefin. It has a low-shrink
(IN) temperature and is ideal for insulation,
HLT-3/8
YELLOW — 100 FT SPOOL identification, strain relief, wire bundling,
HIX3X-1YE HIX3X-24/8 YELLOW 0.945/ 0.315 0.093 and color-coding.
• UL/CUL file number: E52612 (VW-1)
• Operating temperature range: -67°F (-55°C) to 275°F (135°C)
• Shrink ratio: 2:1
• Shrink temperature: 176°F (80°C)
H4X HEAT-SHRINKABLE POLYOLEFIN TUBING
• Standard colors: black or grey
ProFIT H4X heat shrink tubing is an over-expand-
ed, general purpose, cross-linked, polyolefin tubing • Recommended heat gun: 500°F (260°C)
with a thin wall that has a four-times expansion ra- • SAE-AMS-DTL-23053/5, class 1 and 3
tio. It is developed for a wide range of applications
where larger expansions are required. H4X tubing
EDMO# MFG# MIN. EXPANDED/ RECOVERED
is perfect for repairing harness — eliminating the RECOVERED WALL
need to remove connections or large transitions. WALL ID (IN) THICKNESS (IN)
Also, H4X is flame retardant and compatible with
HLT-1/8B HLT-1/8 BLACK 0.125/0.063 0.020
most adhesives to provide a complete environ-
mental seal. HLT-1/8G HLT-1/8 0.125/0.063 0.020
HLT-3/8 M23053/5-307-8 0375/0.188 0.025
• Meets SAE-AMS-DTL-23053/5, Class 1 Over-ex-
panded specifications
• Shrink ratio: 4:1
• Shrink temperature of 250°
HW3X HEAT-SHRINKABLE POLYOLEFIN
EDMO# MFG# MIN.
EXPANDED/
RECOVERED
WALL THICKNESS
TUBING
RECOVERED (IN) The HW3X series consists of heat-shrink-
WALL ID (IN) able polyolefin tubing that provides great-
H4X-4 H4X-#4 4.000/1.050 0.045 er protection under rough environmental
conditions with heavy-wall, semi-rigid
H4XR-1 1/2 H4X-1 1/2", H4X-#10 4.500/1.450 0.045
material that has excellent insulating,
abrasion-resisting, and strain-relief properties. This product is supplied with
sealant that provides waterproofing and protection in underwater or under-
ground conditions. Seals may be made over lead, steel, aluminum, copper, and
all standard plastic and elastomeric insulating materials.
HAT HEAT-SHRINKABLE POLYOLEFIN TUBING • Operating temperature range: -67°F to 194°F (-55°C to 90°C)
HAT is a thin-wall, heat shrinkable • Recommended heat gun: 500°F (260°C)
polyolefin with a thermoplastic adhesive
coating at the interior that adheres to a • Shrink ratio: 3:1
wide variety of plastic, rubber, and metal • Shrink temperature: 250°F (121°C)
surfaces. When heated, it shrinks to 50% • Standard colors: black
of its supplied diameter to conform to the object that it covers. Once cooled, it
returns to its original state and forms a moisture-resistant bond between the • 48-inch lengths
tubing and substrate. • SAE-AMS-DTL23053/15, Class 1
• Applicable specifications: SAE-AMS-DTL-23053/4, class 2
• UL file number: E52612 (excludes clear) EDMO# MFG# MIN. EXPANDED/ RECOVERED
RECOVERED WALL
• Operating temperature range: -67°F to 230°F (-55°C to 230°C) WALL ID (IN) THICKNESS (IN)
• Shrink ratio: 2:1 HW3X04S48B HW3X-04-S-48-BLK 0.400/0.150 0.060
• Shrink temperature: 250°F (121°C) HW3X07S48B HW3X07S48B 0.750/0.220 0.095
• Standard colors: black HW3X11S48B 11-S-48 BLACK 1.100/0.375 0.120
use in a wide variety electrical applica- DR25-1-0 DR-25-1-0-SP 25.4 / 12.7 1.78
tions. When heated, the adhesive coating
melts and flows to form a positive seal.
This coating adheres to the outer tubing
and the surface below to create an
effective moisture barrier. HML tubing remains flexible to withstand repeated
bending of the substrate below.
DWP-125 HEAT SHRINK TUBING
EDMO# DWP125-3/4
• Ideal for cable repair MFR# 5076682002
• Adhesive bond to a variety of plastics, rubber, and metal DWP-125 is a medium walled, adhe-
• Applicable specifications: SAE-AMS-DTL-23053/4, Class 3 sive-lined, polyolefin tubing that retains
flexible even with a shrink ratio of 3:1.
• Shrink Ratio: HML: 3:1 and HML4X: 4:1
This heat shrink tubing environmental
• Shrink Temperature: 230°F (110°C) seals and protects a wide variety of elec-
• Standard Colors: black trical applications including wire splices,
• Standard Shipping Length: 4-foot lengths breakouts, and connect-to-cable transi-
tions. Suitable for applications where UL
recognized/CSA certified adhesive-lined
EDMO# MFG# MIN. RECOVERED tubing is required.
EXPANDED/ WALL THICKNESS
RECOVERED (IN) • 3:1 shrink ratio allows for insulation
WALL ID (IN) and sealing irregular shapes
3:1 — BLACK — SOLD IN 4 FT STICKS • Medium wall provides increased
HML-1/4 HML-1/4 BLACK 0.236/0.078 0.039 mechanical protection
HML-1/2 HML-1/2 BLACK 0.472/0.157 0.070 • Adhesive lining bonds to wide variety of plastics, rubber, and metals –
HML-3/4B HML-3/4 BLACK 0.748/0.236 0.088 including polyethylene, neoprene, and steel
HML-1B HML-1 BLACK 0.945/0.315 0.100 • RoHS compliant
HML-1 1/2B HML-1 1/2 BLACK 1.575/0.512 0.100 • Minimum expanded/ recovered ID: 0.750 /0.230 in
4:1 — BLACK — SOLD IN 4 FT STICKS • Recover wall thickness: 0.030 in
HML4X-24/6 HML4X-24/6 0.945/0.236 0.088
HML4X-32/8 HML4X-32/8 BLACK 1.260/0.315 0.100
HML4X52/13 HML4X-52/13 BLACK 2.047/0.512 0.100
ATUM ADHESIVE-LINED POLYOLEFIN TUBING
EDMO# NB10132001
MFR# NB10132001
ATUM adhesive-lined polyolefin tubing has
a high-shrink-ratio to environmentally seal
and protect electrical connections and com-
DR25 HEAT SHRINK TUBING ponents. This heat shrink tubing is useful
TTI CONNECT INC for applications: backend connector sealing,
DR25 heat shrink tubing provides breakouts, and connector-to-cable transi-
flexibility and abrasion resistance from tions. The high expansion ration is perfect
its radiation, cross-linked elastomeric con- for repairing most damaged cable jackets
struction. DR25 heat shrink optimized for without removing the connectors.
use in high temperature environments and • Available in 3:1 and 4:1 shrink ratios for
has excellent fluid resistance. This tubing connecter-to-cable sealing
is also suitable to be used as a jacketing • Environmentally seals and protects components and interconnects
material for military vehicle cables and
harnesses. • Medium wall provides increased mechanical protection
• Flame retardant • Adhesive bonds to wide variety of plastics, rubber, and metals; including
polyethylene, aluminum, steel, and copper
• System-25 tubing
• RoHS compliant
• Shrink ratio 2:1
• Min. Expanded/ Recovered wall ID:24.0 / 6.0 in
• Operating temperature range: -75°C to 150°C
• Recovered wall thickness: 0.76
EDMO# MFR# MIN. RECOVER WALL • Comes in 4-foot lengths and colored black
EXPANDED/ THICKNESS (MM)
RECOVERED ID
(MM)
DR25-1/8-0 DR-25-1/8-0-SP 3.2 / 1.6 0.76
DR25-3/16 SILDR-25-3-16-0-SP 4..8 /2.4 0.84
DR25-1/4-0 DR-25-1/4-0-SP 6.4 / 3.2 0.89
DR25-3/8-0 DR-25-3/8-0-SP 9.5 / 4.8 1.02
DR25-1/2-0 DR-25-1/2-0-SP 12.7 / 6.4 1.22
DR25-3/4-0 DR-25-3/4-0-SP 19.0 / 9.5 1.45
2
abrasion resistance for components such as rubber HSF-12/6 HSF-12/6 BLACK SPLD 0.472/0.236 0.040
hoses, harnesses, and plastic pipe as it is very HSF-20/10 HSF-20/10 BLACK SPLD 0.787/0.394 0.040
flexible and easy to install over awkward materials HSF-30/15 HSF-30/15 1.181/0.591 0.040
like bent hoses or pre-formed pipes. HSF is also HSF-40/20 HSF-40/20 1.575/0.787 0.040
Halogen free.
HSF-50/25 HSF-50/25 1.969/0.984 0.040
• Operating temperature range: -40°F (-40°C) to HSF-60/30 HSF-60/30 BLACK SPLD 2.362/1.378 0.040
257°F (125°C) HSF3X-18/6 HSF3X-18/6 0.709/0.236 0.040
• Shrink ratio: 2:1 and 3:1
• Shrink temperature: 275°F (135°C)
• Recommended heat gun: 500°F (260°C)
• 0 .040 in recovered wall thickness
• Standard colors: black
• Standard shipping length: spools
• Sold in 50-foot spools
LASER WIRE
MARKING
Big store selection,
personalized service.
At EDMO, we’re all about providing customized service—particularly when it comes to wire, cable, and laser wire marking. We offer a wide range of
wire sizes available in continuous lengths, meaning that you’ll never get a spliced wire in the middle of the roll when you order from us. Plus, with
large quantities of stock on hand, our customers can expect fast turnaround times. We provide wire and cable just the way you want it. All of our
in-house, custom spools have a core 3.5” or larger to prevent kinking. If you need a different spool with a bigger hole or larger core, we’ll find it.
Give us a call at 1.800.235.3300 or visit edmo.com for custom laser wire marking.
SPIRAL WRAP
SPIRAL WRAP TUBING
2
Spiral wrap tubing provides solid grip with its torsional cut and rigid profile. It retains
strength under repeated flexing and bending and follows wire paths easily, resulting in
tidy, free-running cable bundles. Spiral wrap is also easy to remove and re-apply when
troubleshooting is necessary. Available in polyethylene and PTFE.
PTFE
Primarily for high temperature applications, it has a low operating temperature and is not
affected by organic solvents or acids.
Sold in 25-foot lengths, priced per 100 ft black natural
EDMO# MFR# NOMINAL OD / WALL THICKNESS (IN) NOMINAL PITCH (IN) MAX. BUNDLE SIZE
(IN)
NATURAL / SOLD IN 25FT
SWT-1/8 SWT-1/8 NATURAL 0.125/0.030 0.250 0.5
SWT-1/8XXT SWT-1/8XXT 0.125/0.016 0.250 0.5
SWT-3/16 SWT-3/16 NATURAL 0.188/0.030 0.250 1.0
SWT-1/4 SWT-1/4 NATURAL 0.250/0.030 0.375 2.0
SWT-1/4XXT SWT-1/4XXT 0.250/0.015 0.375 2.0
SWT-3/8 SWT-3/8 NATURAL 0.375/0.030 0.438 2.5
SWT-5/16 SWT-5/16 XT NATURAL 0.3125/-- -- --
SWT-1/2 SWT-1/2 NATURAL 0.500/0.030 0.563 3.0
SWT-3/4 SWT-3/4 0.750/0.040 0.875 4.0
SWT-1 3673700 1.000/0.040 1.000 6.0
BLACK / SOLD IN 25FT
SWT-1/8B SWT-1/8 BLACK 0.125/0.030 0.250 0.5
SWT-3/16B SWT-3/16 BLACK 0.188/0.030 0.250 1.0
SWT-1/4BK SWT-1/4 0.250/0.030 0.375 2.0
SWT-3/8B SWT-3/8B 0.375/0.030 0.438 2.5
SWT-5/16B SWT-5/16 BLACK 0.3125/-- -- --
SWT-1/2B SWT-1/2B 0.500/0.030 0.563 3.0
SWT-3/4B SWT-3/4B 0.750/0.040 0.875 4.0
SWT-1BK SWT-1BK 1.000/0.040 1.000 6.0
POLYETHYLENE
A versatile, low-cost material. Black polyethylene is also low-cost but also contains ultra-violet inhibitors, designed for outdoor use.
EDMO# MFR# NOMINAL OD / WALL THICKNESS (IN) NOMINAL PITCH (IN) MAX. BUNDLE SIZE
(IN)
NATURAL / SOLD IN 100FT
SWP-1/8 SWP-1/8 NATURAL 0.125/0.031 0.250 0.5
SWP-3/16 SWP-3/16 NATURAL 0.188/0.031 0.250 1.5
SWP-1/4 SWP-1/4 NATURAL 0.250/0.058 0.313 2.0
SWP-3/8 SWP-3/8 NATURAL 0.375/0.058 0.438 3.0
SWP-1/2 SWP-1/2 NATURAL 0.500/0.058 0.563 4.0
SWP-5/8 SWP-5/8 NATURAL 0.650/0.062 0.875 5.0
SWP-3/4 SWP-3/4 0.750/0.065 0.875 6.0
SWP-1 SWP-1” NATURAL 1.000/0.100 0.875 8.0
BLACK / SOLD IN 100FT
SWP-1/8BK SWP-1/8BK 0.125/0.031 0.250 0.5
SWP-3/16BK SWP-3/16 BLACK 0.188/0.031 0.250 1.5
SWP-1/4BK SWP-1/4 BLACK 0.250/0.058 0.313 2.0
SWP-3/8BK SWP-3/8 BK 0.375/0.058 0.438 3.0
SWP-1/2BK SWP-1/2 BK 0.500/0.058 0.563 4.0
SWP-3/4BK SWP-3/4BK 0.750/0.065 0.875 6.0
SWP-1BK SWP-1BK 1.000/0.100 0.875 8.0
NYLON
EDMO# MFR# NOMINAL OD / WALL THICKNESS (IN) NOMINAL PITCH (IN) MAX. BUNDLE SIZE
(IN)
2
NATURAL / SOLD IN 100FT
SWN-1/8 SWN-1/8 0.125/0.016 0.250 0.5
SWN-3/16 SWN-3/16 0.188/0.031 0.250 1.5
SWN-1/4 SWN-1/4 0.250/0.030 0.313 2.0
SWN-1 SWN-1 1.000/25.40 1.000 8.0
BLACK / SOLD IN 100FT
SWN-1/4BK SWN-1/4 0.250/0.030 0.313 2.0
SWN-1/2BK SWN-1/2 BLACK 1.000/25.40 1.000 8.0
NON-FLAME RETARDANT
XPNF-1/4 XPNF-1/4 0.250 0.125 – 0.375
ORANGE
XPF-3/8OR XPF-3/8 ORANGE 0.375 0.250 – 0.625
AERO BRAIDED SLEEVING MINI ROLL ROUNDIT 2000 SELF WRAPPING SLEEVE
DEVICE TECHNOLOGIES, INC. Roundit® 2000 self-wrapping sleeves are
Protect-FastTM AERO Braided Sleeving is a tough and lightweight over sleeves used
tough, lightweight method used to contain to bundle and protect cable assemblies,
2
and protect cable assemblies, hoses, and hoses and wire harnesses from chafing,
wire harnesses from abrasion and cutting. cutting, and abrading. Roundit’s self-wrap-
The PFR material is MIL-202 and FAR25 ping feature allows for quick application
approved, gasoline resistant, and has a and removal for assembly and mainte-
temperature rating from -103°F to 257°F nance. It may be applied and removed
(-75°C to 125°C). without disturbing connectors or fittings.
Roundit® 2000 is rated to 125°C and has
• Flammability rating FAR 25 UL VW-1
applications in aeronautical, electronic,
• Expansion 150% sleeve, 25% overlap wrap furniture accessory and general manufac-
• Melt temperature 545°F (285°C) turing industries.
• High resistance to chemicals, corrosion, and abrasion • Rated to 125°C
• Recommended cutting: hot knife • UL recognized
• Low and medium out-gassing • Self-wrapping design
• Black with white tracer • Easy to apply and remove
• Ideal for working with components without disconnecting wires
EDMO# MFR# DIAMETER LENGTH • Tough fabric texture
PFR1BT0200 3-PFA-PFR-1-BT-0200 1/4 in 100 ft
PFR2BT0125 PFA-PFR-2-BT-0125 3/8 in 125 ft EDMO# MFR# NOMINAL SIZE (IN)
PFR3BT0100 PFA-PFR-3-BT-0100 1/2 in 100 ft 5651000803 5651000803S 5/16
VINYL TUBING
ProTECT® SLV-40 Vinyl Tubing is extremely
TAPE
flexible and designed for low temperature appli-
cations down to -85°F with a continuous rating
NYLON TAPE
2
of 175°F. It can be used in applications where
general purpose vinyl tubing lose their flexibility. Flat braided tape manufactured from
SLV-105 ProTECT Vinyl tubing is rated for high 100% high tenacity continuous filament
temperature applications up to 221°F (105°C). nylon yarn and is saturated with a
• Meets MIL-I-7444 specification specially formulated microcrystalline
fungicidal wax for improved knot holding
• SLV-40 operating temperature range: -85°F to and tying characteristics.
175°F (-65°C – 80°C)
• SLV-105 operating temperature range: 15°C
to 115°F (-10°C to 105°C)
• Standard colors: black and clear (all parts listed in table are clear) 101-2WHT
• Standard length: 100 ft
require any heat or open flame when applied Liner: 0.006 in (0.015 cm)
and does not transfer any adhesive to the Typical luminances factor: -4° reading: 900X
materials it is applied to (making for minimal Skewed 45° reading: 700X
cleanup when removed). This tape forms a Temperature resistance: 175°F (79°C), continuous
tough, homogeneous, watertight skin around 250°F (121°C), intermittent exposure
the substrate, even when immersed in water.
This tape is resistant to abrasion, impact,
sunlight, and most chemicals without the need
for overwrap in most applications and it easily
covers irregular surfaces.
MU-METAL MAGNETIC SHIELDING FOIL
EDMO# MUT004-4
MFR# MUT004-4
Dimensions: 0.75 in × 0.020 in × 30 ft MuMetal® foil is used primarily in
Temperature range: -40°F - 212°F (-40°C - 100°C), 226°F (130°C) low intensity fields where the highest
attenuation and permeability µ(Mu) and
highest shielding efficiency are desired.
MuMetal® foil is fully annealed and
available in stock gauges from 0.0002 to
0.010 inches thick.
SILICON FUSION TAPE
EDMO# 608036-1 • Does not require re-annealing unless
MFR# 608036-1 severe forming or heliarc welding is
performed
Extruded from high performance silicone
rubber, silicon fusion tape is self-adhering and • Foils can be slit to a minimum with of 1/4 inch
self-fusing, curing into a solid rubber insulator • Foil width tolerance is ±0.010 inches
at room temperature in 24 hours or less, • Includes adhesive back
resulting in an inseparable barrier that resists
moisture, ozone, and corona at temperatures
up to 260° C. Its high conductivity allows for
INDUSTRIOUS
MFR# 10-400-0176
High gain reflective tape is ideal
for reflecting a PhotoTach beam
in propeller, rotary, and turbine fan
balancing applications. It will work with
photoelectric sensors, such as propeller
and rotor balancing equipment from
ACES Systems, including video motion
capture systems. Constructed using 3M
7610 reflective tape, this plastic-based
film provides excellent retro-reflectivity
due to its spherical lens shape. At only
4-mil think and a peel-off back liner, this
tape conforms easily to most surfaces,
making it ideal for indoor and outdoor
use.
• Sealed-lens surface
• Thin construction
• Excellent reflective gain
• Ease of angularity & conformity
• Angularity allows for pickup from moving objects
• 10ft roll
PRINTERS LW-PX900
LWPX900PCD
LW-PX900
LW-PX900PCD
LW-PX900 kit
LW-PX900 Deluxe kit
2
PRINTER ACCESSORIES
EPSON LABELWORKS PX900 HANDHELD LWPXMAG LWPXMAG Magnetic attachment
LABEL PRINTER LWPXLION LWPXLION Replacement Li-Ion battery pack
EPSON CARTRIDGES
The EPSON LabelWorks™ PX900 label printer 236HCPX 236HCPX Cleaning cartridge: 1 1/2 × 13 ft, 36MM, 100 uses
sets the standard for industrial label printers,
with high-resolution printing capabilities for
printing die-cut and fixed-length labels, heat-
shrink tube, and bar codes. The LW-PX900
prints 360 dpi at print speeds up to 35 mm/ EPSON LABELWORKS PX800 DESKTOP LABEL
sec and is capable of printing on die-cut
square, circle, and oval supplies. Conve-
PRINTER
nience-enhancing features like the included EPSON
removable magnets that allow the printer to EDMO# LW-PX800
be secured to metal surfaces, time-saving MFR# LW-PX800
hot keys, and the “Drop-Stop” and “Pick and The EPSON LabelWorks™ PX800 is a
Print” functionalities add to the LW-PX900’s compact desktop label printer that provides
versatility. fast print speeds and the ability to print on
• High-speed, 360 dpi print output capabil- 163 materials including magnetic tape, heat
ities produce crisp, detailed labels, bar shrink tube, glow-in-the-dark material, and
codes, and industrial adhesive labels up to 1.5 inches
wide. This little printer takes up minimal
• Wire identification faster and at higher resolution than other printer models
desktop space and comes equipped with
• Prints at speeds up to 35 mm / sec hundreds of templates for commonly used
• Can print on shrink tube up to 21 mm (7/8-inch) wide as well as on die-cut labels and signs and thousands of symbols;
square, circle, or oval supplies it also provides capabilities for storing
commonly used bar codes or creating 2D QR
• Provides a 4 mm standard lead margin and the ability to reduce tape waste
codes. For users creating large batches of
down to 1 mm
labels, the PX800 can streamline the process
• Front loading design for fast tape replacement by importing prepared data and tables from Excel. To add that extra profession-
• Comes with magnet attachments that make it easier to use in the field or in al touch, users can even import images including logos and other graphics.
work areas where space is limited • Provides fast print speeds of up to 35 mm/sec with crisp, clear 360-dpi print-
• Equipped with industry specific hot keys that streamline and simplify tem- ing resolution and uses economical tape cartridges that yield more labels
plate section from among six different styles and applications for wire wrap, • Prints on supplies up to 36 mm (1.5 inches) wide (prints on shrink tube up to
patch panels, and punch blocks 21 mm (7/8 inch) wide)
• “Drop-stop” feature stops printing and holds the label until it is removed by • Designed with an integrated PeelGuard® trimmer that extends label life by
the user rounding label corners
• “Pick and Print” programming directs the printer to pause printing and cut- • 1 mm margin setting reduces wasted tape*
ting subsequent labels when the “Drop-Stop” feature is engaged
• Equipped with Wi-Fi printing capabilities that can be used with any smart
• Provides options for auto-cut and half-cut while a “Mixed Length” option device and Epson iLabel or datacom app — this network connectivity makes
allows the user to quickly select varying label lengths for print it easy for multiple users to share one printer
• Includes eight bar-code formats including 2D QR codes, 1000+ symbols, and • Half-cut function allows the user to serialize strips of labels
multiple design effects Constructed with a compact, top-loading design that saves desktop space
• Auto alphanumeric sequencing, repeat and reversed color printing provide (measures 12.3 × 15.1 × 13.8 in)
added options for label and heat-shrink tube creation • ENERGY STAR® certified
• Printing information can be uploaded and stored into the printer using the • Includes: printer, AC adapter, USB cable, label editor professional software
included software and USB cable included with some versions and manual on CD-ROM, guide, and 212BWPX labeling tape
• ENERGY STAR® certified
LW-PX900
Includes Epson LW-PX900 Label Printer, AC adapter, 1 tape cartridge
(212BWPX), owner's manual labeling tape
PW-PX900PCD
Includes Epson LW-PX900 Label Printer, Label Editor Professional software
(CD), USB cable, AC adapter, 1 tape cartridge (212BWPX), Li-Ion rechargeable
battery, 2 removable magnet attachments, owner’s manual, industrial hard
Not finding what you need?
plastic case If you don’t see what you need here, it’s likely we have it, or can order
it in for you. You can also check out the newly improved edmo.com.
With thousands of parts a click away, EDMO has you covered. And as
always, our friendly customer service and sales staff is here for you.
Call us at 1.800.235.3300.
EPSON LABELWORKS PX750 LABEL SHOP KIT • Includes 898 symbols, serialization, 15 bar codes, and QR codes
EPSON • Import and store up to 100 custom labels and images
The EPSON LabelWorks™ PX750 label • Prints on specialty labels such as heat shrink tube, magnetic tape, self-lami-
printer is a professional and portable label nated, glow-in-the-dark, strong adhesive and reflective tapes
2
• Prints on specialty labels such as reflective, magnetic, glow-in-the-dark and CARTRIDGES FOR EPSON PRINTERS
strong adhesive tapes EPSON
• Smaller lead margin adds up to 60% less waste
• Includes the Epson LW-PX400 label printer, Label Editor Professional soft- SHRINK TUBE CARTRIDGES
2
ware, user manual, AC adaptor, USB cable, tape cartridge (212BWPX), and
the drop guard rubber guard sleeve
2
Epson Labelworks PX Magnetic label- Epson LabelWorks PX Self-Laminating
ing tape is perfect for those who need Labels provide long-lasting legibility of
durable, yet removable and reusable la- labels for cable and wire identification.
bels. Ideal for metal shelving and tool- PX self-laminating labels feature highly
boxes, magnetic labeling tape is strong legible text with a durable wrap-around
and long lasting and can withstand covering that is available in both vinyl and
extreme temperatures and humidity. polyester. Like Epson's other PX labeling
They provide excellent resistance to products, these self-laminating are cross
smearing, scratching, curling edges, compatible with any PX printer capable
and peeling and are designed for jam- of 1-1/2-inch tape widths while providing
free printing and are cross-compatible jam- and hassle-free printing.
with all PX printers
Dimensions: 1-1/2 in x 26 ft
Dimensions: 1-1/2 in x 4.9 ft Color: Black on clear
Color: Black on yellow Finish: Glossy
Finish: Semi-matte
EPSON
BAP SERIES
The Spring-Fast® BAP Flexi Wire Protection
Grommet Series provides greater gripping
strength than the “T” and “BT” series grom-
Gray SLIM LOK ENCAPSULATED FLEXI-GROMMET
met edging for severe shock and vibration EDGING
environments with 4-axis flexibility. DEVICE TECHNOLOGIES, INC.
Spring-Fast® SL Series, low-profile, plastic
Black
trim has is encapsulated with a fusion bonded
BT SERIES nylon substrate that offers superior abrasion
The Spring-Fast® BT series includes the resistance. The soft polymer cushion provides
“T” series abrasion-resistant subsurface a soft surface to protect wire and cables while
and a polymer cushion that provides a soft its strong gripping strength holds in severe shock and vibration environments
surface edge grommet on which wires and while maintaining 4-axis flexibility.
cable are protected.
EDMO# MFR# SHEET THICKNESS (IN/MM)
EDMO# MFR# SHEET THICKNESS (IN/MM) SL1-0025- SL1-0025-ER0201 0.0.29 – 0.045 / 0.7 – 1.1
BAP SERIES: 12.75 IN (10 CUT PIECES) – GRAY SL2-0025- SL2-0025-ER0201 0.044 – 0.056 / 1.1 – 1.4
BAP185C402 BAP185C402 0.029 – 0.045 / 0.7 – 1.1 SL3-0008EC SL3-0008-EC0201 0.055 – 0.069 / 1.4 – 1.7
SL4-0025- SL4-0025-ER0201 0.069 – 0.090 / 1.7 – 2.3
BAP SERIES: 1.2 FT CUT LENGTHS – GRAY
SL60026EC0 SL6-0026-EC0201 0.113 – 0.130 / 2.9 – 3.3
BAP508C402 BAP5-0008-EC0402 0.089 – 0.144 / 2.3 – 2.9
25-FOOT REEL
BAP SERIES: 25-FOOT REEL – BLACK
SL3-0025 SL3-0025-ER0201 0.055 – 0.069 / 1.4 – 1.7
BAP125R201 BAP1-0025-ER0201 0.029 – 0.045 / 0.7 – 1.1
BAP225R201 BAP2-0025-ER0201 0.044 – 0.056 / 1.1 – 1.4
BAP60025ER BAP6-0025-ER0201 0.133 – 0.130 / 2.9 – 3.3
BT SERIES: 25-FOOT REEL – BLACK
BT1-0025- BT1-0025-ER0201 0.029 – 0.045 / 0.7 – 1.1
ADS-B WIRE PROTECTION INSTALLATION KIT
BT2025R201 BT2-0025-ER0201 0.044 – 0.056 / 1.1 – 1.4
DEVICE TECHNOLOGIES, INC.
BT8025R201 BT8-0025-ER0201 0.240 – 0.260 / 6.1 – 6.6
This ADS-B install kit from Device Tech-
nologies facilitates the ADS-B upgrade for
MRO service centers and aircraft owners
alike. This installation kit protects critical
wires and reduces AOG time due to a
GROMMET EDGING NASM22529/2 SERIES quick installation — helping MROs lower
DEVICE TECHNOLOGIES, INC. cycle time and take on more ADS-B refit
The NASM22529/2 series have an abra- work.
sion-resistant subsurface and a polymer
cushion that protect wires and cable
from abrasion. Military specification, Kit includes: Mil-202 and FAR25 Aero braided sleeving
FAA approved per NASM 22529/2 and FAA approved Spring-fast grommet edging
national stock numbers per Federal Supply Code 5352. Spring-fast shears for quick clean cuts
Adhesive backed, 24-inch benchtop measuring scale
2
M22529/2-3 M22529/2-3 ADS-B Kit 0.059 – 0.074 in MS35489-10 MS35489-10 0.312 x 0.750
M22529/2-4 M22529/2-4 ADS-B Kit 0.070 – 0.093 in MS35489-11 MS35489-11 0.375 x 0.625
MS35489-13 MS35489-13 0.438 x 0.688
MS35489-14 MS35489-14 0.500 x 0.812
MS35489-16 MS35489-16 0.562 x 0.812
GROMSTRIPS MS35489-19 MS35489-19 0.688 x 1.00
Gromstrips consisting of a continuous MS35489-20 MS35489-20 0.750 x 1.062
length of extruded U-channel for use as a
MS35489-21 MS35489-21 0.750 x 1.438
protective covering on sharp edges. There
are two material options: polyethylene for MS35489-23 MS35489-23 1.00 x 1.375
general use or nylon when more abrasion-
and heat resistant material is required. These gromstrips can be cut to any
length and a serrated version of the polyethylene gromstrip is ideal for use in
acute angles or similar, difficult insulations.
• Polyethylene option is for general application; Nylon option for abrasion-re- VINYL GROMMETS
sistant material is needed
These vinyl grommets are flexible and
oil resistant. The have a high dielec-
EDMO# MFR# SHEET THICKNESS (IN/MM) tric strength and are both durable and
NYLON MIL-SPEC 21266 long-lasting.
GSNCM-1 GSNCM-1 NATURAL 0.015 – 0.052 / 0.38 – 1.32 • Hardness udometer 60 ±5 shore A
GSNCM-2 GSNCM-2 NATURAL 0.052 – 0.085 / 1.32 – 2.16 • Tensile strength: 1400 psi
GSNCM-3 GSNCM-3 NATURAL 0.085 – 0.128 / 2.16 – 3.25 • Abrasive resistance: excellent
GSNCM-4 GSNCM-4 NATURAL 0.128 – 0.192 / 3.25 – 4.88
• Effect of sunlight: slight to none
GSNCM-5 GSNCM-5 NATURAL 0.192 – 0.255 / 4.88 – 6.48
• Hydro carbon solvent resistance: good
SERRATED POLYETHYLENE
GSPC-1 GSPC-1 NATURAL 0.036 / 0.91
• Weak acid resistance: no effect
GSPC-2 GSPC-2 NATURAL 0.037 – 0.071 / 0.94 – 1.80 • Burning rate: self-extinguishing
GSPC-3 GSPC-3 0.165 – 0.187 / 2.69 – 4.17
GSPC-4 GSPC-4 0.165 – 0.187 / 4.19 – 4.75 EDMO# MFR# DIAMETER (IN)
GSPC-5 GSPC-5 0.18 – 0.250 / 4.78 – 6.35 GV-1/4 GV-1/4 0.128
GV-5/16 GV-5/16 0.188
GV-3/8 GV-3/8 0.250
GV-7/16 GV-7/16 0.313
GV-1/2 GV-1/2 0.375
GV-5/8 GV-5/8 0.500
GROMMETS
GV-21/32 GV-21/32 0.391
GV-7/8 GV-7/8 0.625
BULKHEAD GROMMETS/MIL-SPEC
Designed for electrical insulation,
sealing, noise control, and vibration
isolation, these bulkhead grommets are
constructed with synthetic rubber and
satisfy mil-spec MS25489.
Nylo-Seal tubing is best used for from 1/16 to 1/2 inch. It has a
instrumentation lines, lubrication and replaceable, hardened steel blade.
process piping systems, and fuel, oil, and • Weight: 1 oz
refringent within a temperature range from
-60°F to 225°F. This tubing is constructed • Length: 2-7/8 in
with Nylon 11, which is not affected be solvents, alkalis, diluted mineral acids,
or petroleum products, is also resists sunlight and attacks by vermin. Addition-
ally, this tubing is easy to work with and does not require moisture to enhance
NYLON TUBE FITTINGS
its flexibility. NYLO-Seal nylon tube fittings have excellent resistance to acids, alkalis, dilute
mineral acids, most organic acids, petroleum oils and greases, and photograph-
• Withstands a temperature range from -60°F to 225°F
ic solutions. These fittings can continuously operate at temperatures of 200°F
• Tensile strength: 8,500 psi and intermittently at temperature as high as 250°F. NYLO-Seal Nylon fittings
• Elongation: 310% are excellent for instrument, lubricant, air, hydrocarbon fuel, oil coolant, low
pressure hydraulic lines, laboratory, and chemical applications.
EDMO# MFR# COLOR TUBE O.D. (IN) PSI
44-NSR 44-NSR Natural 1/4 2,500
66-NSR 66-NSR Black 3/8 2,500
88-NSR 88NSR-BK Black 1/2 2,000
EDMO# MFR# COLOR PSI WEIGHT (LB) EDMO# MFR# TYPE TUBE O.D. LENGTH
(IN) (IN)
TUBE O.D.: 1/4 IN / MIN. BEND RADIUS: 1 IN
259N04 259N04 Insert 1/4 0.375
2800004 44P-BK Black 400 1.10
259N06 259N06 Insert 3/8 0.500
44PB 44PB Blue 400 1.10
261N04 261-N04 Nut/sleeve assembly 1/4 0.468
44PF PEFR-4-0500 Black 400 1.10
261N06 261N06 Nut/sleeve assembly 3/8 0.578
44PGN 44P-GN Green 400 1.10
262N04 262N04 Nylon inline union 1/4 1.812
44PN 44P-N Natural 400 1.10
262N06 262N06 Nylon inline union 3/8 2.000
44PO 44P- Orange 400 1.10
264N04 264N04 Union tee 1/4 1.156
44PR 44P-R Red 400 1.10
264N06 264N06 Union tee 3/8 1.406
44PY 44PY Yellow 400 1.10
264N08 264N08 Union tee 1/2 1.515
TUBE O.D.: 5/16 IN / MIN. BEND RADIUS: 1-1/8 IN 265N04 265N04 Union elbow 1/4 1.156
55PN 55P-N Natural 600 1.9 265N06 265N06 Union elbow 3/8 1.406
266N04X02 266N04X02 Female connector 1/4 1.343
TUBE O.D.: 3/8 IN / MIN. BEND RADIUS: 1-1/4 IN
266N04X04 266N04X04 Female connector 1/4 1.531
66PB 66PB Blue 600 2.5 268N04X02 268N04X02 Male connector 1/4 1.406
66PN 66P-N Natural 600 2.5 268N04X04 268N04X04 Male connector 1/4 1.593
66PR 66P-R Red 600 2.5 268N08X08 268N08X08 Male connector 1/2 2.015
66PY 66P-Y Yellow 600 2.5 269N04X02 269N04X02 Male elbow 1/4 1.156
269N04X04 269N04X04 Male elbow 1/4 1.156
270N04X02 270N04X02 Female connector 1/4 1.156
3
272N04X02 272N04X02 Male branch tee 1/4 1.156
272N06X04 272N06X04 Male branch tee 3/8 1.406
282N04 282N04 Bulkhead union 1/4 2.312
282N08 282N08 Bulkhead union 1/2 2.781
261P04 262P04 264P06
0742-006
NORPRENE TUBING
EDMO# 0023071
EDMO# MFR# STYLE HOSE SIZE MFR# 23.071
0701-153 0701.153 Inline 1/8 x 1/4 (MIPT x hose size) Norprene® Chemical Tubing is heat-seal-
0706-015 0706.015 Inline 1/4 x 1/4 (hose x hose) able tubing that is resistant to oxidizing
0711-115 0711.115 Elbow 1/4 x 1/4 (hose x hose) agents, acids, and alkalies and it doesn’t weaken or crack, even after years of
0711-153 0711-153 Elbow 1/8 x 1/4 (MIPT x hose size) prolonged atmospheric ozone exposure. This tubing can be used in tempera-
tures between -60°F to 275°F. Use with insert type fittings.
0716-015 0716.015 Tee 1/4 x 1/4 x 1/4 (hose x hose x hose)
0716-153 0716.153 Tee 1/8 x 1/4 x 1/4 (MIPT x hose size)
0742-006 0742-006 Cross 1/4 (hose)
ID / OD: 1/4 in / 3/8 in
Wall (in): 1/16
Working pressure at 70°F: 10 psi
Resistant to: ammonia, bleach, brake fluid, bromine, chlorine, essential oils, ethylene
glycol, formaldehyde, hydrochloric acid, hydrogen peroxide, iodine, methanol, nitric acid
(10%), plating solutions, soap solutions, sodium hydroxide (to medium concentrations)
and sulfuric acid (to medium concentrations)
4
64321B 64311B 64662B-107
MK-641 MK-642
4
and rivet mounting on 3/8” (9.53 mm) approved. Constructed with heat-treated carbon steel (stud), tempered music
centers. These strips are riveted to a wire (spring), and mild steel (cup) with a zinc trivalent clear finish.
support member and the stud panel rests
against the strip face that has the stud EDMO# MFR# PANEL CUP
holes. The strips are aluminum alloy with Right angle and flat Dzus rails THICKNESS DIMENSION “B”
a continuous rigid stainless-steel wire
staked across the underside of the stud 3506SC38A- AA2-038-1930 0.060-0.069 inches 0.080 inches
holes. The fastened panel rests on the strip and its captive quarter-turn studs 3506SC44A- AA2-044-1930 0.120-0.129 inches 0.140 inches
engage the rigid wire.
• Strip extrusion is aluminum alloy 6061-T6 and the wire is stainless steel type
316, condition B with spring temper.
QUARTER TURN FASTENER ADAPTER KITS
EDMO# MFR# LENGTH (FT) Quarter turn fastener adapter kits allow users to
RIGHT ANGLE integrate quarter turn fastener mount avionics
D5-1-1 D5-PR35-1 1 into a tray mount stack more easily. These fully
D5-1-2 D5-PR35-1 2 adjustable systems provide a hassle-free way to
combine these two separate mounting methods
D5-1-3 D5-PR35-1 3
with an attractive finish when installed.
D5-1-4 D5-PR35-1 4
• Each adapter consists of three pieces: rail in-
D5-1-5 D5-PR35-1 5
terface, spacer (visible portion), and a quarter
FLAT turn fastener.
D5-1 D5-PR35 1
D5-2 D5-PR35 2
D5-3 D5-PR35 3
D5-4 D5-PR35 4 EDMO# MFR# SIZE
D5-5 D5-PR35 5 RK6000-P-5 RK6000-P-5 2.625 in
RK6010-P-1 RK6010-P-1 1.125 in
RK1010-8 RK1010-8 Single stack flanged rail tray mount kit. (-8 version is an 8-inch kit.)
RK1020 RK1020 Single stack, reduced rail tray mount kit.
RK1040 RK1040 Single stack, canted rail tray mount kit designed for Beech Baron and other installs.
RK2000 RK2000 Dual stack, standard outer and full dimension center rail tray mount kit
RK2027 RK2027 Dual stack, minimum outer, and minimum dimension center rail tray mount kit.
*Purchase the EDMO# RK400- Installation Spacer Kit for easier installation with Radiorax products. Call for additional sizes.
4
PHILLIPS PAN HEAD SCREW/CARBON STEEL
EDMO# MFR# STYLE LENGTH (IN)
Phillips pan head screws. Carbon steel con-
4RX1/2THA 4RX1/2THA 4R 1/2 struction with a cadmium finish per QQ-P-416,
6RX1/2THA 6RX1/2THASS 6R 1/2 Type I.
6RX3/8THA 6RX3/8THASS 6R 3/8
8RX1/2THA 8RX1/2THA 8R 1/2
EDMO# MFR# THREAD LENGTH (IN)
8RX1/2FHB 8RX1/2FHB 8R 1/2
35206213 MS35206-213 4-40 1/4
10RX1/2THA 10RX1/2THA 10R 1/2
35206215 MS35206-215 4-40 3/8
Call for additional sizes.
35206217 MS35206-217 4-40 1/2
35206218 MS35206-218 4-40 5/8
35206219 MS35206-219 4-40 3/4
PHILLIPS TRUSS HEAD SCREW/STAINLESS STEEL 35206225 MS35206-225 6-32 3/16
Phillips truss head screws. 300 series stainless 35206226 MS35206-226 6-32 1/4
steel construction with a passivated finish. 35206228 MS35206-228 6-32 3/8
35206230 MS35206-230 6-32 1/2
35206231 MS35206-231 6-32 5/8
EDMO# MFR# THREAD LENGTH (IN) 35206232 MS35206-232 6-32 3/4
35206233 MS35206-233 6-32 7/8
526C632R10 526C632R10 6-32 5/8
35206234 MS35206-234 6-32 1
526C632R12 AN526C632R12 6-32 3/4
35206238 MS35206-238 6-32 2
526C632R16 AN526C632R16 6-32 1
35206241 MS35206-241 8-32 1/4
526C632R4 AN526C632R4 6-32 1/4
35206243 MS35206-243 8-32 3/8
526C632R5 AN526C632R5 6-32 5/16
35206245 MS35206-245 8-32 1/2
526C632R6 AN526C632R6 6-32 3/8
35206246 MS35206-246 8-32 5/8
526C632R7 AN526C632R7 6-32 7/16
35206247 MS35206-247 8-32 3/4
526C632R8 AN526C632R8 6-32 1/2
35206249 MS35206-249 8-32 1
526C832R10 AN526C832R10 8-32 5/8
35206253 MS35206-253 8-32 2
526C832R12 526C832R12 8-32 3/4
35206-244 MS35206-244 8-32 7/16
526C832R16 AN526C832R16 8-32 1
35206-263 MS35206-263 10-24 1/2
526C832R4 AN526C832R4 8-32 1/4
35207270 MS35207-270 10-32 3/4
526C832R6 AN526C832R6 8-32 3/8
35207261 MS35207-261 10-32 3/8
526C832R7 AN526C832R7 8-32 7/16
35207263 MS35207-263 10-32 1/2
526C832R8 AN526C832R8 8-32 1/2
35207264 MS35207-264 10-32 5/8
526C103210 AN526C1032R10 10-32 5/8
35207265 MS35207-265 10-32 3/4
526C103224 AN526C1032R24 10-32 1-1/2
35207267 MS35207-267 10-32 1
526C1032R6 AN526C1032R6 10-32 3/8
526C1032R7 AN526C1032R7 10-32 7/16 Call for additional sizes.
526C1032R8 AN526C1032R8 10-32 1/2
526C1032R9 AN526C1032R9 10-32 9/16
Call for additional sizes.
PHILLIPS PAN HEAD SCREW/STAINLESS STEEL
Phillips pan head screws. 300 series stain-
less steel construction with a passivated
finish per ASTM A380.
PHILLIPS TRUSS HEAD SCREW/CARBON STEEL
Phillips truss head screws. Carbon steel con-
struction per FED-STD-66. Cadmium finish per EDMO# MFR# THREAD LENGTH (IN)
QQ-P-416, Type I. MS51957-10 MS51957-10 2-56 3/4
MS51957-2 MS51957-2 2-56 3/16
5195713 MS51957-13 4-40 1/4
EDMO# MFR# THREAD LENGTH (IN) 5195715 MS51957-15 4-40 3/8
5195717 MS51957-17 4-40 1/2
526440R8 AN526-440R8 4-40 1/2
5195719 MS51957-19 4-40 3/4
526632R10 AN526-632R10 6-32 5/8
5195725 MS51957-25 6-32 3/16
526632R6 AN526-632R6 6-32 3/8
*continued on nextsizes.
Call for additional page
Call for additional sizes.
EDMO# MFR# THREAD LENGTH (IN) EDMO# MFR# THREAD LENGTH (IN)
5195726 MS51957-26 6-32 1/4 3521448 MS35214-48 8-32 1-1/2
5195727 MS51957-27 6-32 5/16 MS35214-44 MS35214-44 8-32 3/4
5195728 MS51957-28 6-32 3/8 3521555 MS35215-55 10-32 1/2
5195730 MS51957-30 6-32 1/2 MS3521558 MS35215-58 10-32 7/8
5195732 MS51957-32 6-32 3/4 MS35215-59 MS35215-59 10-32 1
5195734 MS51957-34 6-32 1 3521560 MS35215-60 10-32 1-1/4
5195741 MS51957-41 8-32 1/4 MS35214-59 MS35214-59 10-32 1
5195745 MS51957-45 8-32 1/2 MS35215-57 MS35215-57 10-32 3/4
4
Phillips pan head screws. Brass construction Call for additional sizes.
with a black oxide finish+A15 finish.
EDMO# MFR# THREAD LENGTH (IN) PHILLIPS FLAT HEAD SCREW/STAINLESS STEEL
100 degree Phillips flat head screws with 300
3521412 MS35214-12 4-40 1/4
series stainless steel construction. Passivated
3521414 MS35214-14 4-40 3/8 finish per ASTM A380.
3521416 MS35214-16 4-40 1/2
3521418 MS35214-18 4-40 3/4
MS35214-13 MS35214-13 4-40 5/16 EDMO# MFR# THREAD LENGTH (IN)
MS35214-15 MS35214-15 4-40 7/16 24693C10 MS24693C10 4-40 1
3521427 MS35214-27 6-32 1/2 24693C2 MS24693C2 4-40 1/4
3521429 MS35214-29 6-32 3/4 24693C3 MS24693C3 4-40 5/16
3521431 MS35214-31 6-32 1 24693C4 MS24693C4 4-40 3/8
3521433 MS35214-33 6-32 1-1/2 24693C6 MS24693C6 4-40 1/2
MS35214-25 MS35214-25 6-32 3/8 24693C7 MS24693C7 4-40 5/8
MS35214-26 MS35214-26 6-32 7/16 24693C8 MS24693C8 4-40 3/4
MS35214-28 MS35214-28 6-32 5/8 24693C24 MS24693C24 6-32 1/4
MS35214-30 MS35214-30 6-32 7/8 24693C25 MS24693C25 6-32 5/16
MS35214-32 MS35214-32 6-32 1-1/4 24693C26 MS24693C26 6-32 3/8
3521442 MS35214-42 8-32 1/2 24693C27 MS24693C27 6-32 7/16
3521446 MS35214-46 8-32 1 24693C28 MS24693C28 6-32 1/2
Call for additional sizes. Call for additional sizes.
4
MS24694C11 MS24694C11 8-32 7/8
24693C51 MS24693C51 8-32 5/8
Call for additional sizes.
24693C52 MS24693C52 8-32 3/4
24693C53 24693C53 8-32 7/8
24693C54 MS24693C54 8-32 1
24693C56 MS24693C56 8-32 1-1/4
PHILLIPS COUNTERSUNK SCREW/ALLOY STEEL
24693C58 MS24693c58 8-32 1-1/2 Phillips pan head screws. Alloy steel construc-
tion with a cadmium finish per QQ-P-416. Tensile
24693C270 MS24693C270 10-32 3/8
strength is 125,000 – 145,000 PS.
24693C272 MS24693C272 10-32 1/2
24693C273 MS24693C273 10-32 5/8
24693C274 24693C274 10-32 3/4 EDMO# MFR# THREAD LENGTH (IN)
24693C276 MS24693C276 10-32 1 514P440-4P NAS514P440-4P 4-40 1/4
24693C278 MS24693C278 10-32 1-1/4 514P632-4 NAS514P632-4 6-32 1/4
24693C280 MS24693C280 10-32 1-1/2 514P632-6 NAS514P632-6 6-32 3/8
24693C282 24693C282 10-32 1-3/4 514P632-8P MAS514P632-8P 6-32 1/2
Call for additional sizes. 514P832-8P NAS514P832-8P 8-32 1/2
514P83212P NAS514P832-12P 8-32 3/4
Call for additional sizes.
PHILLIPS FLAT HEAD SCREW/ BLACK BRASS
Countersunk 100 degree Phillips flat head
screws. Brass construction with a black oxide PHILLIPS WASHER HEAD SCREW/ALLOY STEEL
finish. Phillips washer head screws. Alloy steel con-
struction per MIL-S-6050. Cadmium finish per
EDMO# MFR# THREAD LENGTH (IN) QQ-P-416, Type I, Class C.
24693BB2 MS24693BB2 4-40 1/4
24693BB4 MS24693BB4 4-40 3/8 EDMO# MFR# THREAD LENGTH (IN)
24693BB5 MS24693BB5 4-40 7/16 525832R10 AN525-832R10 8-32 5/8
24693BB6 MS24693BB6 4-40 1/2 525832R6 AN525-832R6 8-32 3/8
24693BB7 MS24693BB7 4-40 5/8 525-832R7 AN525-832R7 8-32 7/16
24693BB8 MS24693BB8 4-40 3/4 525832R8 AN525-832R8 8-32 1/2
24693BB24 MS24693BB24 6-32 1/4 525-832R9 AN525-832R9 8-32 9/16
24693BB26 MS24693BB26 6-32 3/8 52510R10 AN525-10R10 10-32 5/8
24693BB27 MS24693BB27 6-32 7/16 52510R6 AN525-10R6 10-32 3/8
24693BB28 MS24693BB28 6-32 1/2 52510R8 AN525-10R8 10-32 1/2
24693BB29 MS24693BB29 6-32 5/8 Call for additional sizes.
24693BB30 MS24693BB30 6-32 3/4
24693BB31 MS24693BB31 6-32 7/8
24693BB32 MS24693BB32 6-32 1
24693BB34 MS24693BB34 6-32 1-1/4 WASHERS
24693BB36 MS24693BB36 6-32 1-1/2
24693BB40 MS24693BB40 6-32 2 STAINLESS STEEL FLAT WASHERS
24693BB48 MS24693BB48 8-32 3/8 Flat, stainless steel washers with a passivated finish.
24693BB50 MS24693BB50 8-32 1/2
24693BB51 MS24693BB51 8-32 5/8 EDMO# MFR# BOLT SIZE THICKNESS (IN)
24693BB52 MS24693BB52 8-32 3/4
1149CN432R NAS1149CN432R #4 0.032
24693BB54 MS24693BB54 8-32 1
1149CN616R NAS1149CN616R #6 0.016
24693BB56 MS24693BB56 8-32 1-1/4
1149CN632R 1149CN632R #6 0.032
24693BB272 MS24693BB272 10-32 1/2
1149CN816R NAS1149CN816R #8 0.016
24693BB274 MS24693BB274 10-32 3/4
1149CN832R NAS1149CN832R #8 0.032
24693BB276 MS24693BB276 10-32 1
1149C0332R MS1149C0332R #10 0.032
24693BB278 MS24693BB278 10-32 1-1/4
1149C0363R NAS1149C0363R #10 0.063
Call for additional sizes. 1149C0632R NAS1149C0632R 3/8 0.032
Call for additional sizes.
4
21044N08 MS21044N08 8-32
21044N3 MS21044N3 10-32 21042L3 MS21042L3 10-32
21044N4 MS21044N4 1/4-28 21042L4 MS21042L4 1/4-28
21044N5 MS21044N5 5/16-24 21042L5 MS21042L5 5/16-24
21044N6 21044N6 3/8-24 Call for additional sizes.
Call for additional sizes.
CLIP ON NUT
Floating clip on nuts. Constructed with steel and dry MACHINE BOLT
film lubricant. BACN10 series nut.
Hexagon head cadmium plated steel. 5/16-24
thread size. AN5 series bolt
EDMO# MFR# THREAD SIZE
BACN10FX61 BACN10FX61 6-32
EDMO# MFR# LENGTH (IN) GRIP (IN)
BACN10FX83 BACN10FX83 8-32
BACN10YD1 BACN10YD1 10-32 AN5-12A AN5-12A 1-11/32 13/16
AN5-14 AN5-14 1-19/32 1-1/16
AN5-36A AN5-36A 3-27/32 3-5/16
Call for additional sizes.
FLOATING CLIP NUT
Floating clip nuts with one or two tabs. Carbon
steel construction with cadmium type II finish per MACHINE BOLT
QQ-P-416 and dry film lubricant. Hexagon head cadmium plated steel bolt with
• Edge Distance: 0.500 in type II finish per QQ-P-416. 1/4-28 thread size.
AN174 series bolt.
• Panel Thickness Range: 0.020-0.160 in
EDMO# MFR# THREAD SIZE EDMO# MFR# LENGTH (IN) GRIP (IN)
RC500-8-3 RC500-8-3 10-32 AN174-7A AN174-7A 29/32 7/16
AN174-10A AN174-10A 1-1/32 9/16
Call for additional sizes.
EDMO# MFR# LENGTH (IN) GRIP (IN) EDMO# MFR# DIMENSIONS (IN)
AN4-4A AN4-4A 17/32 1/16 MS24665132 MS24665-132 1/16 x 1/2
AN4-5A AN4-5A 21/32 3/16 MS24665134 MS24665134 1/16 x 3/4
MS24665283 MS24665-283 3/32 x 3/4
4
AN4-6A AN4-6A 25/32 5/16
AN4-7A AN4-7A 29/32 7/16 24665-153 MS24665-153 3/4 x 1/16
AN4-10A AN4-10A 1-1/32 9/16 24665-155 MS24665-155 1 x 1/16
AN4-13A AN4-13A 1-13/32 15/16 Call for additional sizes.
AN4-15A AN4-15A 1-21/32 1-3/16
AN4-24A AN4-24A 2-17/32 2-1/16
AN4-46 AN4-46 4-25/32 4-5/16
CLIPS & INSERTS
Call for additional sizes.
TURNBUCKLE CLIP
EDMO# MS21256-1
STANDARD CLOSE TOLERANCE BOLT MFR# MS21256-1
Hexagon head cadmium plated steel bolt with Corrosion resistant steel turnbuckle locking clip.
type II finish per QQ-P-416. 5/16-24 thread size.
AN175 series bolt. TINNERMAN CLIP
EDMO# S10233-3B
MFR# C8095-632-3B
EDMO# MFR# LENGTH (IN) GRIP (IN)
Silver, zinc electroplate snap ring for U-type nuts.
AN175-17A AN175-17A 1-31/32 1-7/16 6-32 thread.
AN175-22A AN175-22A 2-11/32 1-13/16
Call for additional sizes. STEEL INSERTS
Knurled, threaded steel inserts with zinc plating.
Open end.
CLEVIS BOLT
Cadmium plated steel clevis bolt with type II EDMO# MFR# THREAD SIZE INSERT SIZE
finish per QQ-P-416. 10-32 thread size. AKS4-632 AKS4-632-80 6-32 0.80
AKS4-832 AKS4-832-80 8-32 0.80
EDMO# MFR# LENGTH (IN) GRIP (IN) AKS4-1032 AKS4-1032-130 10-32 0.130
AKS4-420 AKS4-420 1/4-20 0.165
AN23-11 AN23-11 23/32 3/8
AN25-17 AN25-17 1-7/64 3/8
Call for additional sizes.
ACF314 ACF528
The ACF 314 and ACF 328 are 3-port cooling fans with the ability to cool up
to three avionics units and the capacity to cool up to 20 cubic feet of air per
minute. The ACF 314 operates on 14 VDC while the ACF 328 operates on 28
VDC, respectively using a high-quality, brushless blower motor and RunQuiet
technology.
The ACF5 28 is similar to the ACF 328 in operating voltage, but is equipped with GARTER FILTER
5 ports and the ability to cool up to 5 avionics units. AERO PERFORMANCE
EDMO# ARB3-5-1
MFR# ARB3-5-1
Weight: 1.18 lb Polyurethane foam garter filter used on all
Dimensions: ACF 314 & ACF328: 5.18 x 5.18 x 2.1 in Tempest vacuum-regulating valves and dry air
ACF 528: 5.13 x 6.77 x 2.1 in pressure pump inlet air filters (AA1J series inlet
Operating Voltage: ACF 314: 14 VDC filters).
ACF 328 & ACF 528: 28 VDC
Current Draw: ACF 314: 960 mA nominal (1.7 A startup)
AIRBORNE GYRO AIR FILTER
4
ACF 328 & ACF 528: 480 mA nominal (0.85 A startup)
Certification: FAA-PMA AERO PERFORMANCE
EDMO# AAD9-18-1
MFR# AAD9-18-1
Increase gyro life with Airborne gyro air filter.
EDMO# MFR# VOLTAGE PORTS Incorporates a 0.3 micron filter element that pro-
ACF314 ACF314 14 3 tects gyro instruments by filtering out tobacco
ACF328 ACF328 28 3
smoke and cabin dust. Small, lightweight, easily
installed. Fits most planes. Dual 3/8 beaded
ACF528 ACF528 28 5
tubes simplify two-gyro installations.
ACCESSORIES
305084-00 305084-00 Connector kit for ACF328
305552-00 305552-00 Install kit AIS 200 series
QUALITY
is recommended for air ventilation,
extraction of engine fumes, cooling of electronic units, and welding gas aspi-
ration. The material is in compliance with the RoHS Directive 2002/95/EC and
its subsequent amendments including the RoHS2 Directive 2011/65/EU and
RoHS3 Directive 2015/863.
• Conveys air from cooling fans to electronics
• Rated for medium temperatures -55ºC to 125ºC
• High resistance to aging
• One fiberglass reinforced textile
• Neoprene rubber compound
• Coated with steel wire
Tooling...................................................................................................................... 112
Insertion & Extraction................................................................................................. 113
Crimp & Barrel Die Tool Sets....................................................................................... 119
Wire Cutters & Pliers................................................................................................... 125
Wire & Cable Strippers................................................................................................ 126
Heat Guns.................................................................................................................. 129
Soldering Irons........................................................................................................... 132
Wrenches & Drivers.................................................................................................... 135
Vises......................................................................................................................... 136
Grounding Clamps...................................................................................................... 138
Work Lights................................................................................................................ 138
Cases........................................................................................................................ 139
TOOLING
PANEL PRO MODEL 6126
BULLER ENTERPRISES, INC
Reduce the time it takes to cut out a panel with the Panel Pro 6126 from Buller Enterprises;
a computer-controlled router that takes cutting time down from a day to less than a couple
of hours. This machine is optimized for cutting 1/8-inch thick aluminum sheet metal but is
capable of handling other thicknesses as well as Plexiglas and wood. The Panel Pro cuts a
wide range of sizes with accuracy to approximately 0.0002” and it has the ability to create
corners and micro stop countersinks. All that’s required is a Pentium computer; the Panel
Pro’s included AvCAM software is compatible with .dxf files created by AutoCAD.
5
• Perfect for cutting 1/8-inch thick aluminum sheet metal but able to cut aluminum as
thick as ½-inch as well as other materials such as Plexiglas and wood (note: no vacuum
system)
• 61-inch width travel (X axis), 26-inch height travel (y axis), and 3.125-inch up and down
travel (Z axis); capable of making micro stop countersinks and other operations
• Fast cutting times: ≈1 hour, 20 minutes to complete a 4-foot wide King Air 350 panel with
an average cutting speed of 12 - 15 inches per minute (speed depends on the material
and desired finish)
• Included AvCAM operating software uses the Z axis of a .dxf file (if no Z coordinate is
supplied as in 2D CAD, the Z depth defaults to a Z cutting depth entered by the user)
• Has switches for repeatable absolute zero in X, Y, and Z as well as hard stops on the X
and Y axes so that the X to Y square can be easily checked and reset
• Minimum corner radius is dependent on the end mill used; for 1/8-inch, the minimum radius is 0.0625 inches
• Pentium compatible; Windows XP or 7 operating systems, 32 or 64 bit; requires a standard serial or USB port with adapter to connect with the SC3 Controller
• Requires about 4 × 6 feet of room for operation
5
shank
820-UP-125 820-UP-125 Single-fluke end mill, 1/8-inch diameter, 1/8-inch
shank for plastic cutting
M81969/103
M819691403 M81969/14-03 Plastic Insertion/removal Blue/white MIL-C-26482, MIL-C-81703,
MIL-C-83723, MIL-C-38999,
MIL-T-81714 and MIL-C-5015
M819691602 M81969/16-02 Plastic Insertion/removal Blue/white MIL-C-81511 Series 3 & 4 M819691602
CONTACT SIZE #20
M81969/102 M81969/1-02 Plastic body/ Insertion/removal Red/white MIL-C-24308 and MIL-C-81659
metal tip
M81969-102
M819691402 M81969/14-02 Plastic Insertion/removal Red/white MIL-C-26482, MIL-C-81703,
MIL-C-83723, MIL-C-38999,
MIL-T-81714 and MIL-C-5015
M819691410
M819691410 M81969/14-10 Plastic Insertion/removal Red/orange MIL-C-38999
M819691411 M81969/14-11 Plastic Insertion/removal Red/white MIL-C-26482, MIL-C-81703,
MIL-C-83723, MIL-T-81714 and
MIL-C-5015
M819691601
*continued on next page
M819691604
5
REMOVAL TOOL
For the following contacts by HYPIN YHMM16-1, YHMM16-3, YHMM16-4, HMM16- EDMO# DRK310
Souriau (Burndy): 5, YHMM18-2, YHMM20-1, YHMM20-2, YHMM22-1, MFR# DRK310
YHMM22-2 and YHMM24-1 contacts installed in
YHLZ, SYHLZ & SYH modular terminal blocks. DRK310 is a removal tool for size 5 & 9 coaxial con-
tacts from ARINC 404 & 600 connectors.
INSERT/EXTRACTION TOOL –
INTERCHANGEABLE TIPS
EDMO# 91285-1
MFR# 91285-1 REMOVAL TOOL WITH 3 PROBES
Insertion and extraction tool with inter- EDMO# DRK110
changeable tips for use with HD-22 and MFR# DRK110
HD-20 contacts used in Amplimite HD Removal tool with interchangeable
connectors. This tool includes a handle, six tips, a hex wrench, and a plug. Each probes.
plug is color-coded according to specific type and wire size (refer to the table
below). EDMO# MFR# PROBE COLOR
DRK110-122 DRK110-12-2 Yellow
EDMO# AWG INSERTION/EXTRACTION TIPS
COLOR TYPE DRK110-162 DRK110-16-2 Blue
1-543382-0 24–18 Red Extraction
DRK110-202 DRK110-202 Red
1-543382-1 28–24 Brown Extraction
543382-5 28–20 Yellow Extraction
543382-8 28–22 Green Insertion/extraction
5
sleeve is inserted into the mating face of the
housing, depressing the locking lances of the crimped contact, and allowing the
contact to be extracted from the wire-entry face of the housing.
5
in electronic systems. This tool ac- K774 K774 K series crimp tool positioner
commodates wire sizes 20 through K809 K809 Contacts, inner pins/sockets T3-46TA08-lD & T3-47TA08-lD.
32 AWG. It gives a Mil-Standard K817-3 K817-3 Positioner
8 impression crimp that assures
maximum tensile strength while the K1245 51245 Positioner
cycle-controlled precision ratchet K1461 K1461 K series crimp tool positioner
assures consistent crimping with K41 K42 K1461-1 K1461-1 Positioner/for use with amphenol 2m contacts
each use. Built into the tool frame is turret head turret head K1561 K1561 Positioner/for use with M39029/92-531 contacts
an 8-step selector knob that makes
it easier to dial in the correct crimp K1626 K1626 Positioner
depth setting for the wire being SK2/2 SK2/2 Daniels postioner
used (see table below for applicable G125 gauge
positioners).
• AFM8-KIT includes: 1 ea of the following: AFM8, K13-1, K41, K42, 91067-1,
91067-2, 1060026100 and FOAM-AFM8
AF8 CRIMP TOOL
EDMO# MFR# USE MIL P/N DANIELS MANUFACTURING CORP.
AFM8 POSITIONERS & GAUGES EDMO# AF8
K1-S K1S Positioner M22520/2-02 MFR# AF8
K3 K3 Positioner M22520/2-05 The AF8 is qualified to MIL-
DTL-22520/1 and is compatible
K13-1 K13-1 Positioner M22520/2-08
with the wire range of 12 through
K40 K40 Positioner M22520/2-07 26 AWG. With over a thousand
K41 K41 Positioner M22520/2-06 available turret heads, the tool frame
K42 K42 Positioner M22520/2-09 can be adapted to very specific
military or proprietary contact/wire
K43 K43 Positioner M22520/2-10 combinations. The AF8 provides an
K60S K60S Positioner M22520/2-03 8-impression crimp, assuring max-
imum tensile strength with almost UH2-5 positioner TH4 turret head
K106 K106 Positioner --
every closed barrel contact. Tool
K127-1 K127-1 Positioner --
requires a compatible turret head
K127-2 K127-2 Positioner/ deutsch -- and positioner. G125 gauge
K267-1 K267-1 Positioner M22520/2-23 • Dimensions: 9.75 x 2.5 x 1.25 in
K287 K287 Positioner M22520/2-11 • Weight: 15 oz
K338 K338 Positioner M22520/2-13
K339 K339 Positioner M22520/2-16 EDMO# MFR# MIL P/N USE
K340 K340 Positioner M22520/2-14 COMPATIBLE TURRET HEADS AND POSITIONERS FOR THE AF8.
K342 K342 Positioner M22520/2-17 TH1A TH1A M22520/1-02 Turret head
K342-1 K342-1 Positioner -- TH163 TH163 M22520/1-04 Turret head
K392 K392 Positioner -- TH254 TH254 -- Turret head
K532-1 M22520/2-35 Positioner M22520/2-35 TH270 TH270 M22520/1-12 Turret head
G125 G125 Go-no-go gauge M22520/3-1 TH285 TH285 M22520/1-13 Turret head
88-200 88-200 Inspection gauge set -- TH4 TH4 M22520/1-03 Turret head
TH343 TH343 -- Turret head
TH452 TH452 -- Turret head
86-1S
family. any angle and provides comfort for the user,
reducing fatigue. The calibration remains
EDMO# MFR# MIL P/N USE accurate with a unique, eight-step, machined
steel block which holds tolerances longer than standard adjustment screws.
MH860 POSITIONERS & GAUGES
• Eight-gauge setting tool that changes via a selector knob
86-19 86-19 M22520/7-11 Positioner
• Full cycle, ratcheting, control-action mechanism
86-1S 86-1S M22520/7-02 Positioner
86-2 86-2 M22520/7-03 Positioner • Easy operation with either hand, or use the optional WA10A foot valve with
86-20 86-20 M22520/7-12 Positioner
recommended WA27RF filter/regulator unit
86-3 86-3 M22520/7-04 Positioner • Crimps contacts from sizes 20 to 28 and wires from 20 to 32 AWG
86-37 86-37 -- Universal positioner • Accommodates MIL-standard and commercial Kxxx series positioners
86-6 86-6 M22520/7-07 Positioner
86-7 86-7 M22520/7-08 Positioner
G145 G145 M22520/3-3 Go-no-go gauge Weight: 2.2 lb
K127 K127 -- Positioner Dimensions: 8 x 2.5 in
Weight: 2.2 lb
EDMO# MFR# DESCRIPTION Dimensions: 8 x 2.5 in
GS100-1 GS100-1 Circular indent crimp tool
ACCESSORIES
GP295 GP295 Turret head positioner
5
A HEX LENGTH B HEX LENGTH
Y109P Y109P M22520/5-29 0.16 lb 0.324 0.400 0.100 0.400
Y110P Y110P M22520/5-25 0.16 lb 0.426 0.400 0.100 0.120
Y137 Y137 M22520/5-35 0.16 lb 0.324 0.400 0.128 0.400
Y138 Y138 M22520/5-37 0.16 lb 0.314 0.400 0.151 0.400
Y140 Y140 M22520/5-41 0.16 lb 0.290 0.400 0.178 0.400 Y137 Y140
Y141 Y141 M22520/5-43 0.16 lb 0.268 0.400 0.197 0.400
Y142 Y142 M22520/5-19 0.16 lb 0.255 0.400 0.213 0.400
Y143 Y143 M22520/5-45 0.16 lb 0.231 0.400 0.218 0.400
Y144 Y144 M22520/5-47 0.16 lb 0.359 0.400 -- --
Y149 Y149 M22520/5-21 0.16 lb 0.475 0.400 -- --
Y151 Y151 M22520/5-27 0.16 lb 0.532 0.400 -- -- Y142 Y149
Y152 Y152 M22520/5-04 0.16 lb 0.138 0.090 0.118 0.270
Y178 Y178 M22520/5-61 0.16 lb 0.429 0.400
Y196 I196 M22520/5-03 0.16 lb 0.128 0.325 0.105 0.325
Y197 Y197 M22520/5-05 0.16 lb 0.213 0.325 0.178 0.325
Y204P Y204P M22520/5-09 0.16 lb 0.178 0.400 0.068 0.093
Y205P Y205P M22520/5-11 0.16 lb 0.213 0.400 0.068 0.093
Y197 Y206P
Y206P Y206P M22520/5-13 0.16 lb 0.255 0.400 0.068 0.093
Y208P Y208P M22520/5-59 0.16 lb 0.255 0.400 0.100 0.100
Y209P Y209P M22520/5-57 0.16 lb 0.255 0.400 0.100 0.120
Y631 Y631 0.25 lb 0.218 0.307
Y687 Y687 0.25 lb 0.255
Y715 Y715 0.25 lb 0.260
Y758 Y758 -- 0.16 lb 0.242 0.300 0.193 0.192 Y209 Y758
Y501 Y501 M22520/5-100 0.16 lb pre-insulated terminal crimp 26-10 AWG
Y527 Y527 M22520/5-101 0.25 lb pre-insulated terminal crimp 26-20 AWG
Y540 Y540 M22520/5-103 0.25 lb splice crimp 16-26 AWG
Y501
*Additional die sets available, go online or call EDMO for more information.
5
cable and heavy-gage wire • Carbon steel construction with extra strength pivot pins
• Dies close in a straight line • Ratchet control with emergency ratchet release
• Locator and wire stop when
applicable EDMO# MFR# DESCRIPTION/COMPATIBILITY
• Insulation adjustment on tools for AMPLI-BOND, PIDG and PLASTI-GRIP PRO-CRIMPER II
terminals 58433-2 58433-2 RG 58/59 Frame only | Compatible with all SDE dies
• Approx. weight 2.1 lb 90574-1 90574-1 Frame only; for AMP Universal MATE-N-LOK contacts
PRO-CRIMPER III
EDMO# MFR# WIRE DESCRIPTION 354940-1 3549401 Frame only
GAUGE 58433-1 584331 For crimping 50Ω commercial BNC and TNC plugs and jacks
onto RG 58/U, RG59/U and RG 62/U cable
576782 576782 14 Strato-therm heavy head hand crimp tool
58433-3 584333 Includes crimping tool frame 354940-1 and die assembly
59239-4 59239-4 12-10 Heavy head hand crimp 58423-1 for RBY terminals
58448-2 58448-2 Includes crimping tool frame 354940-1 and die assembly
58448-3 for AMPLIMITE 28AWG to 20AWG HDP-20
connector contacts.
58495-1 584951 Includes crimping tool frame 58495-1 with die assembly
T HEAD CRIMP TOOL (T-HEAD) 58495-2 for crimping Multimate Type III(+) and Type VI
Contacts.
• Dies close in a straight line
58529-1 58529-1 Includes crimping tool frame 354940-1 and die assembly
• Quick take-up on handle for hold- 58529-2
ing terminal or splice in place PRO-CRIMPER II DIE ASSEMBLIES
• Adjust insulation crimp with a 58425-2 58425-2 For Coaxial Connectors
4-position screw 58435-1 58435-1 BNC/TNC/ RG-58/59/62/ Includes two ferrule crimp
• Approx. weight 1.3 lb section and two center contact crimp sections. The crimp
sections are marked to identify the cable sizes used with
the connectors
EDMO# MFR# WIRE GAUGE DESCRIPTION 58436-1 58436-1 BNC, TNC. For use with RG-58, RG-59, RG-62 and use with
crimp tool 58433-2
59170 59170 22-14 Red & blue short handle
220189-3 220189-3 For RG-58/141/142
59250 59250 22-14 Red & blue long handle
PRO-CRIMPER III DIE ASSEMBLIES
59275 59275 26-24 Yellow & white
58423-1 58423-1 For terminals and splices. Consists of an anvil and indenter;
when closed, the dies form three crimping chambers. Dies
are secured within the tool frame with screws.
58495-2 58495-2 For pins and sockets. Consists of crimping dies and a
locator assembly with a wire anvil, and insulation anvil, wire
crimper, and insulation crimper
CERTI CRIMP II TOOL 90574-2 90574-2 For Commercial MATE-N-LOK Contacts
TE CONNECTIVITY 91902-1 91902-1 For use with 50-Ohm C, HN, N, and TNC COAXICON
EDMO# 91529-1 Connectors and RG-142/400.
MFR# 91529-1
Certi Crimp II single action
hand tool securely crimps min-
iature universal II Mate-N-Lock
connector terminals. This pre-
mium quality hand crimp tool is
ROTA-CRIMP HAND TOOL
designed to produce consistent, high-quality crimps to exact specifications. A TE CONNECTIVITY
reliable ratchet control mechanism keeps the tool fully engaged and ensuring a EDMO# 601075
complete crimp—eliminating partial crimps. MFR# 601075
• Dies close in a straight line The Rota-Crimp hand tools work
with large uninsulated SOLISTRAND
• Contact locator and support and Tubular terminals and splices,
• 4-postion insulation crimp adjustment as well as Cable Maker battery
• Ejects crimped contact terminals and pre-insulated PLASTI-GRIP and TERMINYL terminals and splices
wire sizes 8 through 4/0 AWG (see table for details). These tools have two fixed
• Crimps miniature universal II Mate-N-Lock connector terminals rotating crimping dies that are held in place by spring-loaded indexing pins.
• Wire Range: 26-22 AWG Each die is positioned using a spring-loaded die locator pin.
• Max. Insulation Dia.: 0.69 in (1.75 mm) • Tubular steel handles with rubber grips
SHIELD-KON HAND CRIMPING TOOL EDMO# MFR# WIRE SIZE USE WITH
Crimp Tool for Shield-kon non-insulat- 63819-0000 638190000 20-30 AWG Micro-fit crimp terminals
ed outer sleeve GSC connectors up to 63819-0800 63819-0800 24-30 AWG Pin/Socket & SPOX
.348 I.D. and insulated outer sleeve 63819-0900 63819-0900 16-24 AWG Mini-Fit Jr. crimp terminals
GSR connectors up to .297 I.D.
63819-1300 63819-1300 18-24 AWG Standard 1.57mm pin/socket
• Length: 8 in crimp terminals
• Weight without dies: 1 lb
5
OPEN/CLOSED BARREL & FLAG TERMINAL
CRIMPER
EDMO# 25E TOOL MG-1300 CABLE TIE CUTTER
MFR# 25E EDMO# MG-1300
MFR# MG-1300
The Milbar 25E 10-22 AWG Open/Closed
Barrel and Flag Terminal Crimper is an Cable tie cutter with two safety guards
open and closed barrel plus flag terminal that slide behind the cable tie strap for
Crimp Service Tool. It features insulated simple removal without the risk of damag-
and non-insulated crimp stations as well ing bundled cables or wires. Ergonomic,
as bolt and screw sizing and cutting stations. cushioned grips.
CRIMPER/CUTTER TOOL
EDMO# 18E
MFR# 18E FLUSH CUTTER
EDMO# 12-500
The 18E is an all-purpose tool MFR# 12-500
that strips and cuts wires, crimp
terminals, and cut bolts. The stripper 5 Inch production quality flush cutter for
section strips: 22-20, 18, 16, 14, 12, trimming component leads or cutting wire.
& 10 AWG wire. Crimps insulated
and non-insulated terminals in the following sizes: 22-14, 12-10 AWG. The
bolt cutter section cuts the following size bolts: 4-40, 6-32, 8-32, and 10-32.
Features Air-Pocket cushion grips.
• Length: 8.75 inches ANGLED FLUSH CUTTER
• Crimps: 10-22 GA insulated or non-insulated COOPER TOOLS
• Strips: 10-22 GA overall EDMO# GA54-J
MFR# GA54JV
29 degree angled diagonal cutter with
HEX COAXIAL CABLE CRIMP TOOL KIT flush cut. For cutting directly above the
PASTERNACK ENTERPRISES work area. Features green cushion grips.
EDMO# PE5004-KIT
MFR# PE5004-KIT
For use with RG6, RG8, RG11, RG58, RG59,
LOW PROFILE SHEAR CUTTER
RG174, RG179, RG213, RG223, RG316, RG400. XCELITE
Hex Size 0.042, 0.068, 0.080, 0.100, 0.128, EDMO# 170M
0.151, 0.178, 0.213, 0.255, 0.324, 0.429. MFR# 170M
General-purpose cutter with superior
blade by-pass shear cutting action. Better
cuts with half the effort and greatly re-
duced mechanical shock delivered to the
work. 5 in length with red grips.
BT-SJ-468 BT-SJ-468 Adjustable soft jaw pliers roller bearing design, articulating/locking
BT-SJ468-1 BT-SJ-468-1 Replacement jaw insert arms, and interchangeable dies make
the Twist-Strip a user-friendly and efficiently designed tool. The TSK8000 uses
custom dies (sold separately) with adjustable cutting blades which compensate
for irregularities in the cables jacket. The dies are engineered with a track that
match the contour of the cable’s outer jacket to provide a controlled rotation of
the tool and guides the cutting blades along the length of the cable.
SERRATED LONG REACH PLIERS
XCELITE
EDMO# 378M EDMO# MFR# DESCRIPTION
MFR# 378M TSK-8000 TSK8000 Adjustable Twist-Strip tool (die sets sold separately)
Long reach pliers with serrated jaws and a DIE ASSEMBLIES
thin profile for use in precision electronic TSD1080 TSD2080 .071 - .080 2 inner conductor cable
assembly applications. TSD1090 TSD2090 .081 - .090 2 inner conductor cable
TSD2120 TSD2120 .111 - .120 2 inner conductor cable
THREE-IN-ONE SAFETY WIRE PLIERS TSD2130 TSD2130 .121 - .130 2 inner conductor cable
TSD2140 TSD2140 .131 - .140 2 inner conductor cable
The safety wire pliers combine a standard
plier, safety wire twister, and wire cutter. TSD2150 TSD2150 .141 - .150 2 inner conductor cable
They are machined from hardened alloy TSD3120 TSD3120 .111 - .120 3 inner conductor cable
steel with a black oxide finish. Featuring a TSD3130 TSD3130 .121 - .130 3 inner conductor cable
locking grip and cutting edge. The tapered TSD3140 TSD3140 .131 - .140 3 inner conductor cable
nose allows use where standard tools TSD3150 TSD3150 .141 - .150 3 inner conductor cable
will not fit. One handed operation is very
simple, grasp the wire and lock the pull
knob to twist and squeeze to unlock. WWP109
5
and fraying the wire. This efficient tool uses spring-loaded tension and requires
one third less hand pressure for each strip.
5
• Works with the DBS-R03 (M81306/2-01C)
roll over tool for 0.250 wide bands and powerful blower make this heat gun
ideal for heat shrinking tubes, sleeves,
• Adjustable to ensure current tension
and welding. The weight is optimized and
• Patented a compression fixture system using a Go/No-Go Gage to measure balanced to reduce fatigue and provide
the tool tension comfort to the user.
DEDICATED
fatigue.
• 80°C to 600°C temperature range
• Three-Stage airflow
• Optimized weight & balance
• Continuously adjustable temperature
5
110036523 110036523 Case for use with pistol tools
110036731 110036731 Case for use with barrel tools
MAGNETIC HEAT GUN ARM 110038728 110038728 Tarpaulin scissors
STEINEL AMERICA, INC. 110039165 110039165 Fillet weld feeder
EDMO# 01445 110047650 110047650 HL light for use with HL2320E, HL2020E, HL1920E
MFR# 110049589 and HL1820S
110048202 110048202 Pressure roller, brass, 30 mm
This hot air gun tool stand features a
magnetic base for supporting hot air 110048203 110048203 Pressure roller, teflon roller33 mm
guns from Steinel. 01483 01483 Industrial security hanger for use with all Steinel
Professional Heat Guns except for the HL1610S
• Compatible with heat gun models 110045172 110045172 Plastic hanger for use with flexible hot air tool
HG 2320 E, HL 2020 E, HL 1920 E, HL stand
1820S 110049032 110049032 Metal heat gun stand
5
sleek 90-watt hybrid pencil, and micro THICKNESS/
soldering capacity. Also, the WT line REACH (IN)
is backward compatible with over
FITS TOOLS: EC1201A, EC1204A, PES50, PES51 & WCC101
1,000 tip and tool combinations.
ETA ETA 0.062/0.032/0.625 Screwdriver
• Digital soldering station WT1 with WP 80 and WR S201
ETB ETB 0.093/0.02/0.625 Screwdriver
• WP80 soldering iron (80 W) with silver-line tips for all standard soldering ETJ ETJ 0.031/0.012/1 Long screwdriver
applications
ETK ETK 0.046/0.026/1 Long screwdriver
• Setback, lockout, temperature window, F/C switching, standby, and auto-off ETP ETP 0.031/0.012/.0625 Conical
time
ETR ETR 0.062/0.044/.0625 Narrow screwdriver
ETS ETS 0.015/-/1 Long conical
WEP 70 SOLDERING IRON
FITS TOOLS: WP25, WP30, WP35 & WLC100
WELLER
EDMO# WEP70 ST1 ST1 0.062/0.032/0.75 Screwdriver
MFR# T0058770715/ WEP 70 ST2 ST2 0.093/0.02/0.75 Screwdriver
The 70 Watt, WEP 70 soldering iron ST3 ST3 0.125/0.02/0.75 Screwdriver
provides the ability to change tips without ST4 ST4 1.87/0.025/0.75 Screwdriver
tools while the ergonomic handle reduces ST5 ST5 0.031/-/0.75 Single flat
fatigue and provides improved precision. ST6 ST6 0.031/0.019/0.75 Screwdriver
• Choose from wide range of long-life ST7 ST7 0.031/0.012/0.75 Conical
ET tips ST8 ST8 0.062/0.044/0.75 Narrow screwdriver
• Heat-resistant, ESD safe, silicon cable
• Tool-less tip change
• Solder iron 70W, 23V
• Ergonomic handle reduces fatigue and higher precision
SOLDERPRO 100
• Compatible with the Weller’s WE line of soldering stations EDMO# PRO100K
• ESD safe MFR# PRO-100K
The SolderPro 100 is a butane-powered,
portable, multi-function heat tool. This
SL325 23 WATT SOLDERING IRON cordless tool provides a power range from
WELLER 30 to 100 watts and is simple and safe
EDMO# SL325 to operate. This device is easily ignited
MFR# SL325 with a Piezo electric ignition and within
The SL325 soldering iron is a portable and light- 15 seconds it’s ready to use. It heats
weight and convenient soldering tool for those with a catalytic burner and on a full tank
smaller jobs that are way from the workbench. The of fuel, can last for up to 120 minutes of
compact size fits neatly into a technicians tool bag operation.
and deploys easily when needed. • The blow torch operates at temperatures of up to 2400°F
• Round, ergonomic soft grip handle allows for • Includes a 60/40 rosin core, sponge, extra orifice, instruction manual, case,
extended use 2.4 mm chisel tip, reflector, and blow torch tip
• Non-temperature controlled soldering iron
• Stainless steel heater for long life
Weight (with fuel): 142 g
Length w/cap 233 mm (9.2 in)
(w/soldering tip): [215 mm (8.5 in)]
Power: 23 W
Approximate temperature: Soldering tip: 250-500°C (480-950°F)
Voltage: 120 V
Torch: 1300°C (2400°F)
Temperature range: 700°F (371°C), depends on tool
Hot knife: 200–350°C (400–600°F)
Tip range: PL111
Heat blower: 250–500°C (480–950°F)
Gas container capacity: 20 mL
Operating time: 120 mi at mid setting (one gas filling)
5
MFR# LENGTHS (IN) WIDTH ACROSS FLATS XCELITE
SHORT LONG EDMO# 99-PS-40BP
MFR# 99-PS-40BP
H-028 7/32 1-7/32 0.028
H-035 11/32 1-7/32 0.035 The 99-PS-40BP set is an 11-piece ball-
point Allen® hex socket screwdriver set
H-050 17/32 1-21/32 0.050
that has a unique ballpoint tip for tighten-
H-116 9/16 1-3/4 1/16
ing and removing Allen socket screws.
H-564 39/64 1-7/8 5/64
• Kit includes: one (1) handle, one (1)
H-332 21/32 2 3/32
extension and nine (9) wrenches sizes:
0.050, 1/16, 5/64, 3/32, 7/64, 1/8,
9/64, 5/32, 3/16.
sockets and the box end of the 210° tilt, 360° turn, and 360° rotation. A
combination wrenches both feature off-corner loading which reduces fastener fine/ coarse adjustment knob controls the
rounding. jaw pressure for more delicate work.
• Assortment of hand tools needed for most industrial, mechanical and • Three planes of head movement: 210°
consumer applications tilt, 360° turn, and 360° rotation
• Incredible access from long wrenches with narrow heads, adjustable • Fine/coarse adjustment knob
wrenches and pliers, and a long-beam ratchets with small teardrop heads
• Grooved jaws are perfect for small
• Long nose & diagonal pliers with professional, ergonomic dipped grips wipe objects with reinforced thermal com-
clean easily posite plastic with a continuous heat
• Co-molded bit driver & screwdriver handles with ergonomic grip for improved tolerance of 350°F (177°C), intermittent
performance heat up to 450°F (204°C)
• Shallow and deep SAE/metric 6-point full polish chrome sockets with • Jaws are 2 × 1 inches wide and open up to 2.875 inches
stamped size markings for easy socket identification • Neoprene jaw pads are available for holding delicate items
• 6-inch adjustable wrench with hex-jaw design reduces slippage by gripping • Base features 4.3125 bolt circle countersunk for three 1/4-inch flat head
fasteners tightly screws (not included); compatible with all PanaVise base mounts
• Manufactured from chrome alloy steel for better strength and longer tool life • Dimensions: 6.75 in / 1.2 lb
• Includes blow mold case for storage and organization
• Meets or exceeds ANSI and ASME specifications HEAVY WEIGHT TABLETOP VISE
PANAVISE PRODUCTS, INC
EDMO# MODEL350
Kit includes: 2 Ratchets MFR# MODEL350
3 Extensions The Heavy Weight Table Top Vise is a
51 Standard sockets spark plug socket
12 Combination wrenches multi-purpose work center designed
24 Hex keys to hold larger, heavy objects. It’s
2 Pliers adjustable wrench exceptionally stable with self-centering,
2 Screwdrivers magnetic bit driver with 38 bits extra-wide opening jaws that open to 9
Bit adapter
12 Nut driver bits inches and ribbed neoprene jaw pads
that prevent damage to objects. The
dual-purpose parts tray base holds
extra tools and components while pro-
viding added stability. Head movement
is managed with a single knob that
controls three planes of movement, 90°
tilt, 360° turn, and 360° rotation.
WITH 50 YEARS OF
• Self-centering, extra-wide jaws open a full nine inches and hold heavy
objects by centering weight over the base
EXPERIENCE IN THE INDUSTRY, • The 8.5-inch diameter parts tray base mount provides added stability and
EDMO KNOWS QUALITY. has six individual trays to hold small
non-marring anti-skid pads)
parts and tools (includes six
• Ribbed, neoprene jaw pads provide added grip; when the pads are reversed
Everything our customers need at the bench or in the they form a wide “V” shape that holds cylindrical objects (1.875 × 1.5
field, we supply: connectors, insertion and removal inches)
tools, crimpers, terminals and splices, heat guns, • Single knob controls head movement through three planes: 90° tilt, 360°
solder sleeves, plugs and jacks, circuit breakers, power turn, and 360° rotation
outlets, switches, and custom legends. All of this, and • Double-action jaws open and close quickly or can be reversed to provide
more: EDMO has it all. Call one of our friendly sales “zero” closure
representatives at 1.800.235.3300 with questions, or find • Base accepts all 300-series heads and any5/8-inch diameter shaft
exactly what you need online at edmo.com. • Dimensions: 7.875 in / 5 lb
5
• Height: 6.25 in, Weight: 2.7 lb
ROUND DRILL JIG
EDMO# MFR# DESCRIPTION EDMO# DJ-1
MFR# FAP 06
MODEL301 301 Standard table top vise 360 degree
ACCESSORIES This simple tool comes with a 2-1/4-inch
and 3-1/8-inch centering disc and clamp
MODEL300 MODEL300 Standard base
bar. Once the instrument hole has been
MODEL303 303 Standard head for 300 series made, clamp the tool in place and either
MODEL305 305 Low profile base for vise spot drill or drill through the four holes
for accurate instrument mounting.
Constructed with hardened steel for
improved longevity.
• This simple tool is used to make the
PORTABLE VACUUM TABLE TOP VISE irregular 3ATI aircraft instrument
PANAVISE PRODUCTS, INC mount Make from heat-treated alloy steel.
EDMO# MODEL381
MFR# MODEL381
KWIK STEPPER DRILL BIT
The Portable Vacuum Table Top Vise is TEMPO COMMUNICATIONS
exceptionally easy to transport to differ- EDMO# 34403
ent workstations. Its vacuum base quickly MFR# 50344030
attaches to any smooth, non-porous flat
surface with the flip of a lever. A single The Kwick Stepper Drill Bit has a unique split-tip
knob controls three planes of movement, design that penetrates through steel faster than
90° tilt, 360° turn, and 360° rotation. similar bits while resisting walking or skidding on
round surfaces with balanced, double-flute con-
struction that requires less pressure during use.
• Capacity: cut up through 3/8 in (9.5 mm), maxi-
WIDE OPENING HEAD TABLE VISE mum material thickness: 10 GA (3.5 mm)
PANAVISE PRODUCTS, INC • Overall length: 3-9/16 in (90.5 mm)
EDMO# MODEL396
MFR# MODEL396 • Drills through steel, copper, brass, aluminum,
wood, plastic, and laminates
Designed for larger projects, the Wide
Opening Head Table Vise open up to a • Hole size: 13/16 in (4.800 mm), 1/4 in (6.400
generous six inches. The ribbed, neoprene mm), 5/16 in (7.900 mm), 3/8 in (9.500 mm),
jaw pads are 1.875 × 1.5 inches wide and 7/16 in (11.100 mm), 1/2 in (12.700 mm),9/16
provide solid gripping power for flat-sided in (14.300 mm), 5/8 in (15.900 mm), 11/16 in
objects—to hold cylindrical objects, simply (17.500 mm), 3/4 in (19.100 mm), 13/16 in (20.600 mm)
reverse the pads so that they form a wide
“V” shape.
These LED string lights are designed to provide a smooth luminous pattern that
ALS-10A radiates 310 degrees from its long tubular core. Designed for rugged applica-
EDMO# MFR# DESCRIPTION tions that require minimal product weight, tough reliability, an even light cast
and minimal heat generation. Each unit comes with a 10-foot power cord on
ALS-10A ALS-10A Aircraft grounding clamp one end and a female receptacle on the other to allow for easy daisy chaining
ALS-10B ALS-10B Aircraft grounding clamp with integrated jagged edge of lights.
jaw hand clamp
• 15A UL socket integrated into end-cap
• End-to-end pluggable for daisy chaining
• Hexagonal shaped rubber end-caps prevent errant roll and provide cushion-
ing
AIRCRAFT GROUNDING CLAMP • Rubber O-rings inside end-caps protect from moisture and dust
STEWART R BROWNE • Tough-Shield™ polycarbonate hardened, shatter proof and chemical resistant
EDMO# REB2960 outer tube
MFR# REB2960
• Yellow 10ft SJTOW cord with NEMA 5-15P plug
The REB2960 ground clamp is a world
• Skydrol 500B-4®, Skydrol LD-4®, and Skydrol 5® resistant
standard for grounding or bonding small
containers, drums, totes, machinery or • 310 degree light cast
personnel in areas containing flammable
liquids or dust. This plier-type clamp has EDMO# MFR# DESCRIPTION
a die cast aluminum body with 2 stainless
6030-5000 6030-5000 24 inch / connect up 22 lights
steel points and a hefty 55 pound spring
compression. This design allows the 6060-5004 6060-5004 48 inch / connect up 12 lights
clamp to penetrate multiple layers of
paint or corrosion build-up so that proper
contact is made to bare metal.
50’ GROUNDING REEL WITH GATOR CLIP PORTABLE TWIN-TUBE FLUORESCENT WORK
STEWART R BROWNE
LIGHT
EDMO# 700-50R STEWART R BROWNE
MFR# 700-50R
The Model 700-50R Static Discharge Reel
has an alligator clip and 50 feet of cable.
The reel is used to ground tanker trucks
and rail cars.
This portable, twin-tube fluorescent work light is designed as a task light during
GROUNDING PLUG aircraft maintenance operations. If feature a chemically hardened light tube
STEWART R BROWNE that resists chemical damage. Also, up to nine work lights can connected in
EDMO# M83413/4-1 series to provided lighting in larger spaces.
MFR# M83413/4-1 • Features two 50-watt fluorescent lamp
Grounding plug for use in aircraft ground- • Connect up to nine in series to light larger spaces
ing and bonding applications. Meets mili- • 36-inches long
tary specifications for proper grounding of
aircraft during refueling or maintenance.
EDMO# MFR# DESCRIPTION
6650 6050-5036 Portable twin-tube fluorescent work light
ACCESSORIES FOR 6650 WORK LIGHT
5000-1055 5000-1055 Vertical hanger
5000-1126 5000-1126 Horizontal hanger
5
EDMO# MFR# DESCRIPTION • Watertight o-ring seal
• Automatic pressure equalization valve
1925-2015 1925-2015 LED work light with 25 ft power cord
2302-0003 2302-0003 Battery operated LED work light • Pick n’ pluck with convoluted lid foam
2302-0011 2302-0011 Battery operated LED work light with battery and charger • Stainless steel hardware and padlock
ACCESSORIES protectors
Black with foam
5000-1639 5000-1639 Battery pack for Stubby II cordless work light
5000-1618 5000-1618 Battery charger for Stubby II battery pack
EDMO# MFR# INTERIOR EXTERIOR
DIMENSIONS DIMENSIONS
BLACK WITH FOAM
1170000110 1170-000-110 10.54 x 6.04 x 3.16 in 11.64 x 8.34 x 3.78 in
LED TUBULAR WORK LIGHT 1200B 1200-000-110 9.25 x 7.12 x 4.12 in 10.75 x 9.75 x 5 in
STEWART R BROWNE 1560B 1560-000-110 20.37 x 15.43 x 9 in 22.06 x 17.93 x 10.43 in
EDMO# XP-65-LED 1650 1650-020-110 28.57 x 17.52 x 10.65 in 31.59 x 20.47 x 12.45 in
MFR# XP-65-LED-50P BLACK NO FOAM
The XP-65 LED tubular work light 1170001110 1170-001-110 10.54 x 6.04 x 3.16 in 11.64 x 8.34 x 3.78 in
boosts of an explosion proof design 1560BNF 1560-001-110 20.37 x 15.43 x 9 in 22.06 x 17.93 x 10.43 in
and extra bright LED bulbs. YELLOW WITH FOAM
• Includes 50 ft cord and plug 1500Y 1500-000-240 16.75 x 11.18 x 6.12 in 18.5 x 15.25 x 6.88 in
• Ideal for use in hazardous 1520Y 1520-000-240 18.06 x 12.89 x 6.72 in 19.78 x 15.77 x 7.41 in
locations Other cases available. See edmo.com for more info.
• UL listed explosion proof
XE3-24
SERIOUS MULTI-PURPOSE CLEANER
SHURHOLD EDMO# MFR# SIZE
6
EDMO# YBP-0305
MFR# YBP-0305 XE3-24 XE3-24 24 oz
XE3-G XE3-G 1 gallon
Remove tough stains without discoloring or harming
the surface. This powerful cleaner contains no bleach
and is safe on vinyl, non-skid, and graphics. Perfect for
a pre-wax cleaning.
• Works on fiberglass, vinyl, carpet, rubber, teak,
acrylic, and canvas METAL POLISH RESIDUE CLEANER
• Used for black streaks, vinyl seating, exhaust stains, GRANITIZE
bilges, carpet stains, and wheels & rims EDMO# XMPRC-G
MFR# XMPRC-G
• 32 ounce container
Granitize Aviation Metal Polish Residue Cleaner is a
special formulation of alcohol and other components
ULTIMATE ONE BUCKET SYSTEM that quickly removes the black metal polish residue
SHURHOLD in preparation for application of Xzilon corrosion
inhibitor.
The Ultimate One Bucket System is the
complete storage and detailing solu- • Follow with a final cleaning of 100% isopropyl
tion. Turn an ordinary 5-gallon bucket alcohol
into an extraordinary multi purpose • 1 gallon container
utility item that will simultaneously
transform your washing experience and
gear storage. PLEXUS CLEANER PROTECTANT & POLISH
• Includes: Rope handle 5 gallon B T I CHEMICAL
bucket in black or white, bucket Plexus® Plastic Cleaner is specially developed for
lid / padded seat combo, bucket the aviation industry for cleaning and protecting
grate, bucket caddy, bucket base, aircraft windshields. Plexus can also be used on
Brite Wash 32oz, Pro Polish Wax virtually any variety of plastic surfaces. Plexus is
16oz, SMC Cleaner 32oz, Buff Magic an effective solution to clean, protect, and polish
Compound 22oz, and Serious Shine 16oz all types of plastics. Using Plexus is easy to use
— simply spray and wipe with no buffing, mess or
EDMO# MFR# BUCKET COLOR waste. Plexus works by sealing the pores within the
plastic surface with a thin layer of protective wax to
2465 2465 White resist debris, oil, dust and lint, and yellowing. Plexus
2466 2466 Black does not leave smears or smudges; instead it leaves
surfaces with a lustrous finish — colored plastics
are made vibrant and clear plastics become virtually
transparent. 20214
• CLEANS: Powerful, safe cleaning without abrasives
OXIDATION REMOVER FOR PAINT • PROTECTS: Seals the pores of the plastic, keeping out contaminants and
GRANITIZE harsh chemicals
EDMO# XC10-G • QUICK: Spray on and wipe off application reduces man hours
MFR# XC10-G
• EXTENDS WINDOW LIFE SPAN: Decreases window replacement frequency,
Oxidation remover is formulated as a medium reducing life cycle costs
range aggressive cleaner. It is ideal for removing
light to medium scratches and oxidation from all • ANTI-STATIC: Stays cleaner, longer
painted surfaces. Quickly and effectively removes
imperfections while buffing out oxidized paint EDMO# MFR# SIZE
when detailing which helps to minimize work time.
Oxidation remover contains medium grade abra- 20207 20207 7 oz
sives in it and may be applied by hand or machine. 20214 20214 13 oz
• 1 gallon container.
6
• USDA authorized for food preparation surfaces corrosion. DeoxIT® dissolves the contamination and
protects the surface.
• Not for electroplated finishes
• Improves conductivity
• Deoxidizes, cleans and preserves
Size: 5.29oz tube or 2lb can • Reduces intermittent connections, arcing & RFI,
Temperature range: 34ºF to 110ºF wear and abrasion
Mil-spec: A-A-59318 • 5 ounce aerosol
WITH 50 YEARS OF
the flow of electricity between contacts. D-series
improves connector performance and reliability.
INTEGRAL
DEOXIT® G-SERIES CONTACT ENHANCER,
CONDITIONER & PROTECTOR
CAIG LABORATORIES
EDMO#: G5S-6
MFR#: G5S-6
DeoxIT Gold G100L is a unique cleaner, enhancer,
lubricant and protector for plated metal contact
surfaces. It is designed to improve conductivity,
maintain optimum signal quality, reduce fretting
and dendrite corrosion, and stabilize connections
between contacts. The DeoxIT Gold coating reduces
abrasion, arcing, RFI, intermittent connections, and
improves connector performance and reliability.
• Excellent conductivity enhancing, protection, and
minimum cleaning/deoxidizing
• Prevents dendrite and fretting corrosion
• Protects base metals
• Reduces intermittent connections, arcing, RFI, wear and abrasion
• Adjustable valve
• 5 ounce aerosol
6
IDU eliminates up 99.7% of bacteria streaks. Each wipe is individually packaged to preserve product quality and to
and viruses including SARS-Cov-2 allow for easy storage.
(COVID19), MRSA, Staph, Influenza • Crafted with Sontara®, a super soft aerospace-grade fabric that cleans glass
(including H1N1 and H5N1), Tubercu- surfaces without leaving scratches or streaks
losis, E Coli and Legionella.
• Individually wrapped wipes
The ASI-2800 is powered by a Needle
• Safe for avionics and meets the requirements set by Air Canada, USAF, US
Point Bi-Polar Ionization (NPBI) gener-
Navy, Boeing, Bombardier, Japan Defense Agency, and others
ator which purifies indoor air and does
not require any special maintenance
or replacement parts like UV lights or other ionizer products. Unlike these other
products, this bi-polar ion generator does not create ozone or any other harmful Weight: 0.16 oz (single packet)
by-products. The ASI-2800 IDU produces an output of over 2,000,000 positive Dimensions: 5.25 × 7.25 in (unfolded wipe)
and negative ions per cc. These ions create a plasma region that actively
Cleaning formulation: Pre-moistened with proprietary water-based liquid
purifies the treated area by killing bacteria, mold, and viruses both in the air and formula containing purified water, isopropyl alcohol, &
on exposed surfaces. This process also reduces allergens, smoke, and static cleaning agents
electricity as well as helping to control odors. Cleaning formulation approval: Boeing D6-7127 Revision P
A minimum average of 6,000 ions/cc for 1–2 Hours is suggested to properly Approvals: Aerospace Material Specification AMS 3819B, Class
decontaminate an aircraft cabin, enclosed area, or room. An Air Ion Counter 2, Grade A
Boeing Material Specification BMS 15-5F, Class A
should be used to verify the minimum ion count throughout the treated area Douglas Material Specification DMS 1820E
during decontamination (sold separately—call for pricing).
Laboratory results from tests designed to mimic conditions like that of a
commercial aircraft cabin have shown that after 30 minutes, 99.4% of the
SARS-CoV-2 (COVID19) virus inactivated when exposed to ions created with the EDMO# MFR# QUANTITY
Needle Point Bi-PolarIonization (NPBI) Technology.
ICA24 iCA24 Box of 24
• Eliminates up to 99.7% of bacteria and viruses ICA100 iCA100 Box of 100
• Kills bacteria, mold, and viruses including SARS-Cov-2 (COVID19), MRSA, ICA500 iCA500 Box of 500
Staph, Influenza (including H1N1 and H5N1), Tuberculosis, E Coli and
Legionella
• NPBI Commercial Series Ion Generator
• Self-Cleaning Carbon Brushes
• 3 Blower Output Operating Positions: 0° / 45° / 90° CLEANER FOR CRT SCREENS/EFIS
EDMO# CSP20
• 2 Speed / 2,800 CFM Max Blower MFR# CSP20
• 1/2 HP Blower Motor Screen Prep™ presaturated wipes are a con-
• No annual maintenance required venient cleaning and static control system
• Does not produce ozone or other harmful by-products for use on monitor screens. The two-part sys-
tem is excellent for use on computer screens,
• Requires an Air Ion Counter (recommend AIC or equivalent sold by AlphaLab
scope and dial faces, and the glass or plastic
Inc)
surface of instruments. Highly effective,
these cleaning wipes are safe on plastics and
ideal for cleaning sensitive surfaces. Screen
Prep provides a static-dissipative treatment
Weight: 23 lb
to the surface to control static-generated
Dimensions: 19 x 15 x 15 in. contamination. It removes dust, fingerprint
Temperature range: -40°F to 160°F oils, and other vision inhibiting contaminants
Blower motor: ½ HP with no residue. Screen Prep™ Presaturated Wipes contain isopropyl alcohol
Power: 115 VAC 60 Hz / 4.5 Amp Max and an anti-static agent.
Cord: 3 prong grounding plug, 25ft • Controls static-generated contamination
• Wet pad cleans & applies static protection; dry pad wipes screen optically
clear
• Package contains: 25 twin packs (one 3 x 4 presaturated pad, and one 4 x 6
in polishing pad)
SEALANTS 1422A2QT
1422B126
NSL1422RC A2
NSL1422RC B1/2
1 qrt, class A, 2 hr work time
6 oz, class B, 30 min work time
1422B12PT NSL1422RC B1/2 1 pt, class B, 30 min work time
FLAMEMASTER SEALANT 1422B12QT NSL1422RC B1/2 1 qrt, class B, 30 min work time
NATIONAL SEALANTS & LUBRICANTS 1422B26 NSL1422RC B2 6 oz, class B, 2 hr work time
EDMO#: CS3204B1/2
MFR#: CS3204B1/2 25GM 1422B2PT NSL1422RC B2 1 pt, class B, 2 hr work time
The Flamemaster is a fuel resistant sealant 1422B2QT NSL1422RC B2 1 qrt, class B, 2 hr work time
for use on integral fuel tanks and pressurized
cabins as well as other areas such as antennas
that are subject to contact with lubricants, oils,
water and/or weathering. At room temperature,
this two-part polysulfide cures to a flexible,
resilient rubber with excellent adhesion to
aluminum, magnesium, titanium, steel, and
numerous other materials.
• Meets the requirement of specifica-
tions AMS-S-8802 formerly MIL-S-8802, EDMO: BIG SELECTION,
CMNP021, Lockheed, Gulfstream, Hughes
Aircraft, Fairchild SPS 6-1 & 6-2.
PRODUCTS YOU KNOW &
NAMES THAT YOU TRUST.
Size: 25 grams Give us a call at 1.800.235.3300 or visit edmo.com
Cure profile: Application Life- ½ hour
Tack Free Time- 8 hours
for parts and pricing.
Cure Time- 30 hours
Storage life: 9 months
6
• Enhanced thermal stability is important as to avoid burns and swirls. The Shurhold polisher’s dual action,
• MIL-A-46146 Group II/III, TY I 6-inch oscillating head eliminates these issues and allows anyone to get the
same great finish, without burns or swirls.
• No mixing required
• Quick change pads with Velcro backing
• RT cure, no ovens required
• GFCI (ground fault circuit interrupter) cuts off power to the unit should it
• Can be considered for uses with Mil Spec requirements or needing special become shorted by water,
high temperature stabilit
• 20-foot power cord
Weight: 4.8 lb
B&B 5151-B POLYSULFIDE PAINT & SEALANT Rated voltage: 120 VAC
REMOVER Frequency: 60 Hz
NATIONAL SEALANTS & LUBRICANTS Rated current: 4.2 Amp
EDMO# 5151-B Rated power: 500 Watt
MFR# 5151-B
B&B 5151-B is a viscous liquid compound
for removing high and low VOC polysul-
fide primers and sealants from metallic EDMO# MFR# DESCRIPTION
aircraft surfaces. Apply to coatings to be 3100 3100 Dual Action Polisher
removed from metal surfaces by spray,
3101 3101 Dual Action Polisher Starter Kit | Includes: 16oz Pro
flow, mop, brush or dip. Prior to applica- Polish, Pad, and Microfiber towel
tion, surfaces should be clean and free of
water. B&B 5151-B removes polysulfide ACCESSORIES
primers and sealants and some polyure- 3151 3151 Buff Magic compounding pad | 2 pack
thane top coats. 3152S 3152 Pro polish pad | 2 pack
CHEMICALS & 3153S 3153 Microfiber bonnet
• 5 gallon pail
CLEANERS 3154S 3154 Buff Magic foam compounding pad | 2 pack
• Contains no chlorinated solvents, phenols, heavy metals, chromates
3201S 3201 Fine scrubber pad
• Safe on aluminum, magnesium, steel, high strength steel, cadmium, titanium, 3202S 3202 Medium scrubber pad
and other structural metals
3203S 3203 Coarse scrubber pad
• Low odor
*continued on next page
• Flash point over 200º F (93°C)
Weight: 5.2 lb
Rated voltage: 120 VAC
Frequency: 60 Hz
Rated current: 7.5 Amp
Rated power: 900 Watt
6
2461 2461 White ONE Bucket Kit | Includes: 5 gallon bucket, caddy, HANDLES
grate, and lid/padded seat
833 833 Telescoping extension handle | 6ft (43–72 in)
2462 2462 Black ONE Bucket Kit | Includes: 5 gallon bucket, caddy,
grate, and lid/padded seat 855 855 Telescoping extension handle | 9ft. (63–108 in)
2463 2463 Deluxe ONE White Bucket Kit | Includes: 5 gallon bucket, SWIVEL PAD
caddy, grate, lid/padded seat, and base 1710C 1710C Swivel pad and lambs wool cover combo | Includes: swivel
2464 2464 Deluxe ONE Black Bucket Kit | Includes: 5 gallon bucket, pad base and synthetic lambs wool cover
caddy, grate, lid/padded seat, and base
ADAPTERS
INDIVIDUAL PIECES 102CH 102CH Curved adapter | 10 in
240 240 Bucket base
2401 2401 Bucket seat | white
2402 2402 Bucket grate
2403 2403 Bucket seat | black
2404S 2404 Bucket caddy SHURHOLD HANDHELD TOOLS
2431 2431 White bucket | 3.5 Gallon SHURHOLD
2432 2432 Black bucket | 3.5 Gallon
2451 2451 White bucket | 5 gallon
2452 2452 Black bucket | 5 gallon
260 288
833
MON/ ADS-B GEN (DO-260A/B), UAT UPGRAD 113153 UAT option upgrade for existing IFR6000 factory upgrade
978MHz UAT includes UAT module installation, new antenna and
calibration on IFR-6000
• Large keys for gloved operation ACCESSORIES
• Simple user interface 09507 9507 Antenna mounting bracket
• Lightweight and compact at 8 lbs. 11238 11238 Corner bumper
• Battery operation 6 hours plus between charges 35642 35642 Captive screw used with 11238
• Fully FAR part 43 appendix F compliant 36016 36016 Hinge for IFR-6000 antenna mount
56080 56080 5 amp fuse | 32V mini blade
• Transponder Auto-Test
62302 62302 Power cord for 67366 AC power supply
• Data dump of transponder test results to PC 67366 67366 AC power supply
• Elementary and Enhanced Surveillance parameters (DAPs) 91766 91766 Bottom bracket for antenna
• Transponder level automatically determined and capability checked to avoid 10108 10108 Replacement foam IFR-6000 handle grip
nuisance Auto-Test failures 10148 10148 Replacement handle
• Comprehensive GICB test 10241 10241 Transit case
• Configuration files for different classes of transponder 112684 112684 Mechanical assembly antenna with GPS
• Comprehensively tests any DME channel, including track sensitivity 112830 112830 72 inch COAX/TNC to TNC
112831 112831 12 inch COAX/BNC to BNC for use with UAT option
• User selectable TCAS scenarios Part number: 112837 is required.
• TCAS fast scenario feature uses Auto Altitude and Converge to ensure 112837 112837 72 inch COAX/BNC to BNC for use with UAT option
automatic collision at zero range Part number 112831 is required for use.
• Over-the-air or direct-connect operation 2116-0006- 20775 D-Sub Connector for IFR-6000 Interface Plug
6041-5880 62401 12 inch COAX/TNC to TNC
• Parametric measurements including TX power and frequency
7005-8142- 64749 Antenna shield
• USB flash drive software update via web site download AC0820 63656 Bench stand
• Optional ADS-B capabilities are DO-260A/B compliant AC0826 AC0826 Tripod accessory
• Optional TCAS and 978 MHz UAT capability AC0829 62462 25' TNC/TNC Coax cable
• Optional testing using UC-584 Coupler AC0830 86336 50' TNC/TNC Coax cable
AC24006 82553 Tripod, dolly, stand accessory
978 MHZ UAT OPTION FOR IFR 6000 AC27005 67076 Battery pack
Allows for easy, user friendly installation support and verification of ADS-B/
TIS-B and FIS-B information over 978 MHz frequency for aircraft flying below
18,000 feet (see table below).
7
class of transponder. 141590 141590 IFR-6015 with ADS-B and ADS-B integrity options
VIAVI
UC-584 UNIVERSAL TRANSPONDER ANTENNA • Eliminates the need for DD-1494 Frequency Authorization
COUPLER • Universal design allows coupler to be used with any suitable TCAS/transpon-
VIAVI SOLUTIONS der test set
The UC-584 provides reliable Effective
Radiated Power (ERP) and transponder
Minimum Trigger Level (MTL) testing in Weight: 11 lb
high multi-path ramp and hangar environ- Dimensions: 19 in
ments. Provides 20 dB of transponder
Frequency: 1030–1090 MHz
antenna isolation, ensuring airborne
TCAS systems and SSR ground stations Return loss: >9 dB
do not see UUT transponder altitude Insertion loss: 15.5 dB, typical
replies under test conditions where the Repeatability: <1 dB
air-data system is pressurized to flight levels. This innovative design includes Isolation: >20 dB
an integral positioning slot that improves the ability to replicate measurements Bearing accuracy: 18°, max / < 10°, typical
and produce repeatable ERP tests. Comes in single or dual antenna coupler kits Connector: TNC female
(see table).
7
7
10238 10238 Transit case
11238
24140
11238
24140
Corner bumper
TNC short plug
ALT-8015 MILITARY PULSE RADIO ALTIMETER
35642 35642 Captive screw used with 11238
TEST SET
56080 56080 5 amp fuse | 32V/mini blade
VIAVI SOLUTIONS
EDMO# ALT-8015
59880 59880 Thru-Hole 40.0 MHz TCXO, 3.3V
MFR# 92923
67366 67366 AC power supply
The ALT-8015 Radio Altimeter Flightline
1201-0909- 9137 Telescoping antenna (also works with NAV-401L,
NAV-402AP) Test Set provides an easily configurable
1201-5601- 9140 Black marker beacon antenna
RF based altitude simulation to quickly
test an installation, or direct connect to
2289-0001- 24141 50 Ohm load
the Line Replaceable Unit (LRU) for addi-
6041-5680 62398 48 inch cable assembly | TNC male connectors tional troubleshooting capability. A large
AC0820 63656 Bench stand color touchscreen displays parametric
AC0831 62400 Remote RS-232 cable | Use with 25 pin Connector measurements and allows for detailed
required for installation of 4000-OPT1 (ELT Option) profiles to be set up to emulate actual
AC27005 67076 Battery pack airborne conditions.
• Tests military pulse radio altimeters:
AN/APN-171(V), AN/APN- 194(V) and AN/APN-209(V), including LPI
variants
• Tests FMCW radio altimeters including CDF types
ALT-8000 PULSE RADIO ALTIMETER TEST SET • Fast detector for tracking LPI radio altimeters with TX power management
VIAVI SOLUTIONS
• Direct-connect to UUT transmit/receive port or to installed system via
The ground-breaking ALT-8000 is a antenna couplers
unique, RF-based portable radio altimeter
flightline test set for 4.3 GHz frequency • Ratio-metric RF loop test allows TX, RX, antenna or feeder faults to be
modulated continuous carrier wave identified
(FMCW) radio altimeters and pulse radio • Programmable multi-leg climb/descend profiles
altimeters. Its large 12-inch, color touch- • Large color touch-screen display with simple user interface
screen is easy to use and back lit for low-
light conditions. Unlike earlier RF-based • Remote control interface (Ethernet)
test systems, the ALT-8000 is portable and • Battery 4 hours plus duration
light—meaning it can be moved from the • Software upgradeable
bench to the flightline for testing. Connec-
• GSA Contract# GS-07F-5985R
tion is simple; it can be directly connected to the transmitter/receiver ports or
the user can rely on the TX/RX antenna couplers for even faster testing.
• Tests FMCW radio altimeters including CDF types
• Tests pulse radio altimeters (non-pulse compression types) Weight: 15.5 lb (test set only)
Dimensions: 10.6 × 13.9 × 3.4 in (27.0 x 35.5 x 8.7 cm)
• Direct-connect to UUT T/R or to installed system via antenna couplers
Coupler loss compensation: 0 to 19.9 dB
• Full RF loop test allows TX, RX, Antenna or Feeder faults to be identified Temperature range: Operating: -20°C to 55°C
• Multi-channel operation (via additional test sets) Storage: -30°C to 71°C
• Programmable multi-leg climb/descend profiles Certification: MIL-PRF-28800F, Class 2, MIL-STD-810F, UL, CE
• WAAS/EGNOS SBAS simulation • Interrogator Test Set Modes 1, 2, 3/A, C, 4, S, TCAS, ETCAS and Mode 5*
(Level 1 and 2)
• Static and dynamic simulations via NMEA-0183 File Record and Playback
• Factory upgrade kits available for APM-424(V)3 and TS-4530 units
• 12 channel configuration available with upgrade path (RAIM supported)
• GSA Contract# GS-07F-5985R
• Programmable space vehicle (SV) parametrics and health
*APM-424(V)5 only
• User or built-in GPS receiver referenced time and date
• PVT data available via RS-232
• User Defined Data Transferable between Linked GPSG units Weight: 12.25 lb (test set with battery)
• Remote control interface Ethernet Dimensions: 7.5 × 11.5 × 14.1 in
* For tracking of L1C, L2C or L5 signals some receivers require synchronized L1 Temperature range: Operating: -40°C to 55°C
transmissions. Storage: -55° to 85°C
** For tracking of E5 signals some receivers require synchronized E1 transmis- Certification: MIL-PRF-28800F, Class 2, MIL-STD-810F, CE, DoD AIMS
sions. MK XIIA Level 1 and Level 2
7
SOFTWARE OPTIONS
• PCMCIA card interface and battery pack provides download of flight data FDS40-5001 FDS40-5001 Database 128 WPS | STARS, EU database
from Teledyne, Sagan, Thales, Honeywell and other systems FDS40-5003 FDS40-5003 Database 512 WPS | STARS, EU database
• HHMPI cradle charges battery and provides file transfer to a PC via USB or to FDS40-5011 FDS40-5011 L3 COMM FA2100 FDR software option
a server over ethernet FDS40-5014 FDS40-5014 F1000 download software option
FDS40-5022 FDS40-5022 Honeywell SSFDR download software option
EDMO# MFR# DESCRIPTION FDS40-5024 FDS40-5024 HFR5-D software option
FDS40-0300 FDS40-0300 HHMPI Kit | Includes HHMPI cradle, USB interface FDS40-5030 FDS40-5030 UASC software option
cable (MPI), USB key (serialized), Yellow pelican FDS40-5102 FDS40-5102 Engineering conversion software option
case, and power adapter kit
FDS40-0301 FDS40-0301 HHMPI Unit & Cradle
ACCESSORIES
FT1033-4 FT1033-4 Spring loaded captive fastener retainer nut
FDS40-0305 FDS40-0305 Sentry HHMPI kit | V3 includes cable and software
FT1182HS10 FT1182HS10-16C Spring loaded #10-32 captive fastener
interrogators • Software-driven design allows for field updates for adding new features,
capability or modifications due to industry changes
• Separate connections for direct or over-the-air testing
• ADS-B squitter encode/decode
• Software defined radio design allows waveform flexibility and future growth
potential • DO-260, DO-260A and DO-260B data parsing
• Dual signal generator design allows coordinated signal production for inter- • Two independent transmitters and receivers
ference and echo testing • TX/RX data logging capability
• Remote interfaces consist of RS-232, Ethernet and GPIB • Full diversity testing capability
• Aeroflex GUI allows easy access to test features • Data parsing in engineering units
• Industry wide use in development and end item testing of transponders and • Pulse and frequency measurement
interrogators • UAT TX/RX capability (optional)
• ADS-B Out (DO-260B) test capability
• Typical applications include:
• Support for engineering development of Mark XIIA equipment (Mode 5) Weight: 41 lb
• Manufacturing ATE for Mark XIIA equipment Dimensions: 10.5 × 19 × 24 in
• Support for AIMS 03-1000 and DO-181 certification testing Over-the-air Transmitter frequency: Range: 952 MHz to 1,223 MHz
Resolution: 10 KHz
testing of Mark XIIA equipment Accuracy: 2.5 ppm
• Test range to 3 km with appropriate antennas Phase Noise: >80 dBC/Hz @ 100 KHz
Inputs/Outputs: Suppression bus (front/back)
• Ramp testing of installed equipment performance 2 scope BNC outputs (front/back)
LAN (front/back)
USB type B control (front)
2 USB type A (front) for HID/flash drives
Weight: 24 lb Number of channels: Transmitter: 4 (XPDR/UAT) & 6 (ADS-B Options)
Dimensions: 4 × 17.75 × 21 in Receiver: 2, Top/Bottom
Temperature range: -10°C to 55°C Receiver dynamic range: 1,090 MHz: >40 dB
UAT: >30 dB
Certification: UL CE DoD AIMS MK XIIA Level 1 and Level 2
Receiver VSWR: <1.4
Relative humidity: 0% to 95% non-condensing
Temperature range: Operating: 0˚C to +40˚C
Storage: 0˚C to +71˚C
EDMO# MFR# DESCRIPTION
Certification: CE (Pending): UL/EN 61010-1, EN 61326-1
IFF45TS110 72438 IFF XPNDR modes/110V/ITAR
OPTIONS
45TSOPT1 83404 IFF XPNDR mode 5 OPT IFF45TS
45TSOPT2 83405 IFF interrogator modes option EDMO# MFR# DESCRIPTION
45TSOPT3 83406 IFF interrogator mode 5 option ATC-5000NG 138156 ATC-5000NG transponder test set
45TSOPT4 83407 DME/TACAN option OPTIONS
45TSOPT5 91684 ADS-B out option ATCNGOPT01 139311 DME option
45TSOPT6 88631 KIV 77 adapter ATCNGOPT02 138157 UAT 978 MHz option
45TSOPT9 86075 KIV 78 adapter ATCNGOPT03 138159 Multi-receiver option
45TSOPT10 140608 ADS-b integrity test option (includes hardware) ATCNGOPT04 138158 SDX command set compatibility option
ACCESSORIES ATCNGOPT05 138223 1400/1403 command set compatibility option
89898 89898 IFF45TS AMS version 9.6 update (CD) ATCNGOPT06 139310 DO-260B mops test option. Requires ATCNGOPT03
138512 138512 Transit case ACCESSORIES
138553 138553 Kit laptop with IFF45TS mode 4 GUI/ITAR 142175 142175 Transit case
ATB-7300NG AVIONICS NAV BENCH TEST SET ASI-376 SERIES TEST PANEL/VOR/ILS
VIAVI SOLUTIONS AVIONICS SPECIALIST INC
EDMO# ATB-7300NG The ASI-376-1 ADF Test Panel provides
MFR# 142759 testing and fault isolation of the Collins
The ATB-7300NG Navigation Test AN/ARN-144, AN/ARN-149(V), and
Set is based on the new VIAVI AXIe VIR-130A/C VOR/ILS Receivers. The Test
Avionics Test Bench (ATB) platform. Panel acts as an interface and contains
The ATB platform is a powerful the ability to provide stimuli and
leading-edge design tailored for measure data required when testing the
end-users from OEMs to repair shops VOR/ILS system. A user supplied control
and can be used for all stages of the avionics lifecycle: Product development; (313N-6C or equivalent) is required for
Design verification & validation; Certification; Manufacturing; Return-to-service; complete testing of the Receiver. Testing
and Service/calibration. of 1553B equipped VOR/ILS Receivers ASI-376-1
• Ethernet remote control interface require the optional 1553B Bus Adapter
(ASI-37-6D) or the ASI-376-2 VOR/ILS Test Panel.
• VHF Generator, ILS/LOC Generator, ILS Glide Slope Generator, VOR Generator,
ADF Generator, Market/Beacon Generator • The ASI-376-1 includes the I/O Cable (ASI-37-6A), 4 RF Cables (ASI-37-
6B1/2/3/4), and a Control Cable (ASI-37-6C).
• Basic Graphical User Interface (GUI)
• The ASI-376-2 includes the I/O Cable (ASI-37-6A), 4 RF Cables (ASI-37-
7
6B1/2/3/4), Control Cable (ASI-37-6C), and 1553B Bus Adapter (ASI-37-6D).
EQUIPMENT SUPPLIED
MFR# DESCRIPTION Weight: 1.3 lb
Dimensions: 3.8 × 7.4 × 2.3 in
ASI-84-1M: TRF Base cable
Localizer: 108.1 Mhz +/- .003% -3 +/- 3 dbm at base of antenna
ASI-84-1N: RF cable Deviation: centered, +/- .047 DDM, +/- .094 DDM, +/- .15
ASI-84-1P: RF Base cable DDM Tone delete: 90 and 150 Hz with undeleted tone
at 30%
ASI-84-1Q: Power Supply cable Accuracy: +/- .005 DDM
ASI-CTS-840: RTA-84X/85X Radar Absorption Barrel Glide slope: 334.7 Mhz +/- .003% -6 +/- 3 dbm at base of antenna
Deviation: centered, +/- .094 DDM, +/- .188 DDM, +/- .30
DDM tone delete: 90 and 150 Hz with undeleted tone
at 4-%
accuracy: +/- .01 DDM
EDMO# MFR# DESCRIPTION ILS: Both the Localizer and Glide Slope signals are above.
ASI-CTS841 ASI-CTS-841 RTA-84X/85X receiver/transmitter/antenna test panel Deviation: Both signals deviated simultaneously
ACCESSORIES VOR: 108.0 MHz +/- .003% -3 +/- 3 dbm at base of antenna
Bearing: Selectable in 10 degree increments
ASI-378-9 ASI-378-9 Frequency plan adapter Accuracy: +/- 1.5 degree
Marker: 75.0 MHz +/- .003%
Modulation: 400, 1300, 3000, 1020 HZ @ 95% – CW or
7
7
• Seven decade ranges of resistance IDEAL AEROSMITH INC.
• Values can be set in 1Ω increments The Model 1291BL single axis position
and rate table system is designed to pro-
vide precise position, rate and accretion
motion for development or production
Weight: Approx. 0.69 lbs. (312g)
testing of commercial or military inertial
Dimensions: 5.79 x 4.61 x 1.3" (14.7 x 11.7 x 3.3cm) sensors. The 1291BL is specially designed
Resistance ranges: 1 to 11,111,110Ω in 1Ω steps for testing smaller inertial sensors and
Internal resistance: 0.3Ω systems.
Power: 0.3W resistors The accuracy and reliability of the 1291BL
Accuracy: 1% test table is achieved with a servo-con-
Humidity: < 80%RH trolled system that consists of a direct
Temperature range: 32 to 122°F (0 to 50°C) drive brushless torque motor, a precision
Connection: Three (3) binding posts absolute optical encoder, and an internal microprocessor-based motion control
card. A standard RS-232 interface provides remote control from a PC computer
for position, rate, and acceleration profiles.
• Tests in a Vertical or Horizontal Axis Configuration
• Precision-ground anodized aluminum tabletop
SCORSBY MOTION TEST TABLE • Trapezoidal motion profiles with programmable velocity and acceleration
IDEAL AEROSMITH INC. • Sinusoidal Motion with programmable frequency and amplitude
EDMO# 230010-12
• Configurable and scalable Analog Input/Output
MFR# 230010-12
• RS-232 Remote Interface, LabVIEW Interface
The Model 1421 Scorsby Motion Test Table
(230010-12) simulates the roll, pitch, and • Electric fail-safe brake (brake release switch located on the table)
yaw motions of an aircraft during flight. It • Axis Active LED
is primarily used for production, qualifica-
tion testing, and exercising of gyroscopic
aircraft instruments and is a standard in
the aircraft industry. The Scorsby table can Weight: 50 lb (23 kg)
be operated from the front panel controls vertical axis configuration: 125 lb (56 kg) centered
horizontal axis configuration: 50 lb (33 kg) centered
or through the remote communications in-
Dimensions: 19 x 18.7 x 7 in (483 x 472 x 178 mm)
terface. The front panel controls consist of
a power switch, LCD display, and four keys: Slip ring lines (-SR64 upgrade) 64 lines (26 twisted shielded pair at 3A per line, 2
singles at 3A per line, 10 singles at 5A per line)
run/menu, increase, decrease, and enter.
Electrical connections: Tabletop: (2) 37 pin Female D-sub connectors
Full computer automation is accomplished Base: (2) 37 pin Male D-sub connectors
via the RS-232 interface or an optional IEEE-488 interface. A closed loop mo-
Power requirements: IEC 60320 Power Entry Connection
tion control system consists of an optical encoder located on the high-speed 115/230VAC ± 10%, 1Ø, 50/60 Hz, 5A(FLA), 10A
shaft of the gear motor providing high resolution feedback for smooth Scorsby BREAKER, 5kA
motion with a constant frequency. SCCR (230VAC req. for speeds over 2000 deg/sec)
• RS-232 interface Relative Humidity: 20% to 85%
non-condensing
• Adjustable tilting head with engraved markings and ball bearing design, and Temperature range: Operating: 50°F to 98°F (10°C to 35°C)
positive stop allows for quickly setting the tilt head
• Reversible oscillation with electronic cycle counter provides versatile testing
from 1 to 99 cycles
• Integral bubble level and baseplate screws allow for quick leveling EDMO# MFR# DESCRIPTION
• Anodized aluminum mounting platform offers durability and corrosion 231150-23 231150-23 24-inch tabletop | SR64 option | includes controller
resistance 231150-905 231150-905 1291BL Controller unit
• Precision ground tabletop mounting surface
level platform is achieved by adjusting the leveling screws, which are mounted
through the base plate. The leveling feet can compensate for as much as definitions. The standard DAC port can be used to provide a trigger pulse or to
5° of tilt. The top surface of the table has six tapped holes for attaching the drive recorders or instruments. An optional GPIB port permits remote control
instrument package to be tested. Simply center the instrument package on the of all functions. PC software is available to aid the user in defining customized
table top and secure it. data definition table(s). The large graphical display and integrated keyboard
• Small and lightweight for easy bench mounting and manual operation provide an informative and intuitive user interface.
• Two degrees of freedom for tilting and rotating test instruments • Two ARINC TX/RX ports and two ARINC 629 transceiver ports
• Spring loaded detents provide accurate tabletop rotary and tilt axis indexing • Operates six to eight hours on the internal battery or power from external 28
VDC or 105-250 VAC
• Flat, precision ground tabletop mounting surface
• Multi-window display of data in engineering (B777 default for 629), hex,
• Anodized aluminum construction for durable corrosion resistance binary, user defined, and graphical formats
• Powerful record and fault analyzer modes
MODEL 1310-1-L
• Williamsburg Protocol software extension available for ARINC 429 file
• Engraved increment on azimuth axis
transfer functions
• Two one-minute sensitive levels on the table base for a more accurately
• RS232C and DAC interface ports standard; GPIB optional
leveled table surface
• Software available for RS232 port (download/upload and word definitions)
• Rotating the handle in the desired direction will change the tilt six degrees
per revolution
7
43-0010-00 43-0010-00 NICAD battery pack is equivalent to 429E, with the addition of unique label definitions for testing of
60-0628-00 60-0628-00 RS Read CD Boeing aircraft avionics.
Weight: 3 lb
DT200 DATATRAC CSDB DATABUS ANALYZER Dimensions: 7.25 × 4.5 × 2.5 in
ATG Power requirements: 110 VAC, 60 Hz, 500 mA
230 VAC, 50 Hz, 300 mA
The Datatrac 200 CSDB Databus Ana- Six (6) internal AA rechargeable NiCad batteries
lyzers advanced features support two
avionic databus standards, ARINC 429
and CSDB (Commercial Standard Data
Bus). The DT200 has extensive receive EDMO# MFR# DESCRIPTION
and transmit capabilities and can manage
many data words, display subfields, and 429EBP 01-1001-12 429 TX/RX databus analyzer | Boeing labels/printer port
manipulate data using features such as 429EN 01-1001-60 ARINC 429 TX/RX kinetics case | 28 Volt DC
freeze, scroll, and clear. The DT200 also 429EX 01-1001-05 ARINC 429 bus analyzer
provides dual operation in either ARINC ACCESSORIES
429 or CSBD modes, data display in 15-0009-01 11288 Battery charger | 110–250 Volt AC to 9VDC
hexadecimal, binary, or engineering units,
15-0009-03 11290 Battery charger | 110–250 Volt AC to 9VDC
and general-purpose recording mode for lab or flight tests.
• CSDB capability for Collins ProLine Avionics
• Manages multiple data words
• Clearly displays subfields
• Manipulates data with such features as FREEZE, SCROLL, and CLEAR T1200B ARINC CONTROL DISPLAY UNIT
• Receives and displays data in hexadecimals, binary, or engineering units ATG
EDMO#: T1200B
• Transmits multiple words at selected rates MFR#: 01-1200-B2
• Identifies failures with breakpoint trigger pulse and history features The T1200B ARINC 429 control display
• Converts digit data to DC unit is designed for use with any system
• General purpose recording mode for lab or flight test using an ARINC 429 Databus. The T1200
is equipped with an external, touch-sen-
• Presents data transients as graphic time plots
sitive color Liquid Crystal Display that
• Operates anywhere for up to 6 hours on rechargeable battery provides a convenient user configura-
tion menu that makes it easy to select
data to be sent or received. This unit
is compatible with all major makes of
Weight: 7.5 lb
navigation/communication equipment
Dimensions: 12.5 x 11.6 x 5 in. due to its ARINC 429 compatibility. The
Power requirements: 7.0 Watts @ 110 VAC/60 Hz T1200B also provides an advantage
8.4 Watts @ 28 VDC or internal battery with on-board electrical systems with
its ability to provide control and display
functions such as operating or directional lights, electrical switching, and
cockpit display panels.
EDMO# MFR# DESCRIPTION
• External 12 inch touch-screen display allows main unit to be located away
DT-200 DT200 ARINC 429 | CSDB databus analyzer from operation
ACCESSORIES • PS-2 style mouse may be used with or without touch-screen
15-0009-21 15-0009-21 Battery charger | 220V
• Test formats that follow specific OEM avionics CMMs
TEST SETS
general aviation, helicopter, UAV,
non-RVSM regional and corporate
aircraft. Critical components used
in the 1811NG have a well-estab-
lished history of proven flight line
DPS-1000 PITOT STATIC TEST SET/RVSM reliability & accuracy– including
BARFIELD the case, pumps, valves, and pressure transducers. Features include wireless
The DPS-1000 is a user-friendly, remote operation via tablet; 7-inch color LCD touchscreen that is sunlight
fully automated, and RVSM-compli- readable and compatible with gloved fingers; go-to-ground function; auto leak
ant air data test set that performs test custom profiles; programmable limit protections; altitude correction and
pitot and static systems tests and altitude compensation for leak testing.
inspections. It is equipped with a • Wireless remote operation with tablet application
7-inch, color LCD touchscreen that
• High accuracy—non-RVSM compliant
is sunlight readable and compatible
with gloved fingers. On it, users • 7-inch color touchscreen & LCD sunlight readable
can easily update the features and • Versatility to update user interfaces & features
user interface. This device has a
• Auto leak test custom profiles
go-to-ground function, auto leak test
custom profiles, programmable limit protections, and an altitude correction • Programmable limit protections
feature. The DPS-1000 is easy to transport with a tough set of wheels and an • Altitude correction & compensation for leak testing
extendable handle on the case.
• Durable wheels and extendable handle on case
• High accuracy-RVSM compliant
• 7-inch color touchscreen
• LCD sunlight readable Weight: 33 lb
• User interfaces and features can be updated Dimensions: 14.8 × 22.2 × 9 in
• Includes go-to-ground function AC power requirements: 85–264 VAC
50–60 Hz
• Auto leak test custom profiles Auto selection
200 VA
• Programmable limit protections
Humidity: 0-95% non-condensing
• Altitude correction and compensation for leak testing
Temperature range: Operating: 0°C to 50°C
• Durable wheels and extendable handle on case Storage: -25°C to 70°C
Weight: 33 lb
Dimensions: 14.8 × 22 × 9 in
Frequency range: 2 MHz to 1 GHz
AC power requirements: 85–264 VAC
Did you know?
50-60 Hz
Auto selection
200 VA
The newly improved edmo.com makes online shopping easier than ever.
Humidity: 0-95% non-condensing With thousands of parts a click away, EDMO has you covered. And as
Temperature range: Operating: 0°C to 50°C always, our friendly customer service and sales staff is here for you. Call
Storage: -25°C to 70°C
us at 1.800.235.3300.
• Three-instrument capability for analog units with optional ranges Correction BARFIELD
cards for all analog instruments The Barfield 1811D is an inexpensive, por-
• Fully portable, self-contained (no electric or external pressure sources table, self-contained field tester. It is ideal
required) for leak testing aircraft pitot and static
systems or on-board testing of altimeters
• Vacuum & pressure hand pumps installed
and airspeed indicators. The tester uses
• Digital instruments contain four indications (altitude, airspeed, vertical two analog or digital instruments (Altime-
speed and Mach) ter and Airspeed) to perform aircraft leak
tests or instrument calibration checks. All
legacy 1811 series testers are configured
with hand pumps and external pres-
Weight: 24 lb
sure ports for supplying the necessary
Dimensions: 9.76 × 15.4 × 14.9 in
pressure and vacuum needed for on-board
Includes: Two 25-ft hoses, a pitot mast adapter, a 2423F static testing.
port adapter kit and a pitot-static system CD-ROM 1811D
• Ideal for flightline calibration checks
and troubleshooting
• Performs precision pitot-static leak tests
EDMO# MFR# CONFIGURATION • Two-instrument combination with optional ranges
1811GA-625 101-00185-625 20–250kts, 2k ft/min, 35k ft | Analog • Correction cards for all analog instruments
1811GA-645 101-00185-645 20–250kts, 4k ft/min, 35k ft | Analog
• Fully portable and self-contained (no electric or external pressure sources
1811GA-665 101-00185-665 20–250kts, 6k ft/min, 35k ft | Analog needed)
1811GA-AOA 101-00185-AOA 20–650kts, 6k ft/min, 55k ft | Digital
• Digital instruments contain four indications (altitude, airspeed, vertical
speed and Mach)
1811 SERIES PITOT STATIC TEST SET 393 AIR DATA & PITOT STATIC TESTERS
ACCESSORIES AIS
The 393 Air Data and Pitot-Static System
EDMO# MFR# DESCRIPTION Testers can be used in the cockpit for
solo pitot-static system functional and
115-00056 115-00056 25-foot hose kit with pitot and static system test
hoses | Includes 115-00057 basic pitot test adapter leak tests.
115-00057 115-00057 Basic pitot test adapter with surgical tubing | • Operates on 115V 60 cycle, 220V 50
#4 AN fitting cycle or portable (no power required)
115-00218 115-00218 40-foot hose Kit with pitot and static system test on hand pump models
hoses | Includes 115-00057 pitot test adapter
• Test all systems at one time on typical
124-00005 124-00005 Altimeter for pitot static tester | 35k
general aviation aircraft, corporate
2423F 101-00100 Static port adapter kit aircraft & air carrier aircraft
B29SAE-42 B29SAE-42 1/8-inch I.D. AN4 flared brass fitting for 2423F static 393
port adapter adapter • Use on the Hangar Floor/Ramp: oper-
ates on 115V 60 cycle or 220V 50 cycle
• Hand pump operation when power is not available
• Use at the bench in the shop: bench test altimeters, encoders, airspeeds,
vertical speeds and air data component
7
ADTS500 SERIES WIRELESS PITOT STATIC • Operate in face-up or standard instrument operating position
TESTERS
DRUCK
The ADTS500 Series, supplied with an Weight: 25 to 35 lb
ADTS Touch, is a family of portable, Airspeed: 260 KTs (300mph)
self-contained pitot static testers, with Input power: 115VAC 60 cycle
a large pitot static volume capability for Outlet connections: 1/8 NPT - female
use on an extensive range of aircraft.
Vacuum/pressure source: Oil-less diaphragm - electrical
With the option of a 2-channel, 3-chan- Oil-less piston - hand pumps
nel or 4-channel model, the ADTS500
Climb/descent: 0-6,000 ft per minute
Series are ideal for most light to wide
body passenger and freight aircraft. Be- Altitude: 35,000ft
cause business needs change such as Temperature range: Operating: -30°C to 85°C (-20°F to 120°F)
the addition of new aircraft to the fleet,
the ADTS500 Series family can be retrospectively upgraded by Baker Hughes.
To ensure an accuracy that is suitable for RVSM (Reduced Vertical Separation
Minimum) validation, the new ADTS500 Series incorporates advanced Druck EDMO# MFR# DESCRIPTION
TERPS (trench etched resonant pressure sensor) technology. To satisfy the 393 393 Pitot static tester | 393/260KTS/6000VS/35K
demand for a smooth rate of change into a high pitot static volume, these 393D 393D Pitot static tester | 260KTS/6000VS/35K
units use Druck’s proportional control technology coupled with a large pump 393P 393P Air Data tester | 35K/300MPH/260KTS/6000FPM
capacity.
• ADTS Touch hand terminal with Bluetooth® wireless technology (backup
cable supplied)
• Swipe-action, touch screen user interface with color graphics and menu
• Multiple languages
• High flow proportional pressure control technology
STATIC
21298-1504 21298-150-4 Static test adapter
33410-62-4 33410-62-4 Static test adapter
33455M-704 33455M-70-4 Static test adapter
SKA100-4-4 SKA100-4-4 Static test adapter
SKA-105 SKA-105 Suction cup for SKA static test adapters
SS32092-4 SS32092-4 Static test adapter
S556326MM4 S556326MM-4 Static adapter 33410-62-4
SKA100-4-4
PITOT STATIC
PS49742M34 PS49742M-3-4 Pitot static test adapter
22300-3-44 PSS22300-3-4-4 Pitot static test adapter
26075-3-44 PSS26075M-3-4-4 Pitot static test adapter
62148M3-44 PSS62148M-3-4-4 Pitot static test adapter
72698-3-44 PSS72698-3-4-4 Pitot static test adapter PS49742M34
73259-3-44 PSS73259-3-4-4 Pitot static test adapter
73260-3-44 PSS73260-3-4-4 Pitot static test adapter
76700-3-44 PSS76700-3-4-4 Pitot static test adapter
76700M2 PSS76700M2-3-4-4 Pitot static test adapter 22300-3-44
88340-3-44 PSS88340-3-4-4 Pitot static test adapter
P95267-4 P95267-4 Pitot and static tester
BLANKING
33410FFAB 33410FFAB-125B Static system blanking adapter
33410FFAB
PT11882
QUICK DISCONNECT
B-QC4-B2PM B-QC4-B-2PM Quick disconnect
B-QC4-D2PF B-QC4-D-2PF Quick connect stem
B-QC4-D4AN B-QC4-D-4AN Quick disconnect
B-QC4-B2PM B-QC4-D2PF
ALPHA PROBE
APA94520MD APA94520MD-4-4-4 Alpha probe adapter
APA17887 APA17887-4-6 System purge adapter, alpha probe adapter
7
APA94520MD
HOSE ASSEMBLIES
340-7270 340-7270 Pitot test hose assembly
53-5160-6- 53-5160-6-24 Hose assembly/non-metallic
NAHA-4-44 NAHA-4-44 Hose assembly
NAHA-6-6 NAHA-6-6 Hose assembly
LUBRICATING FLUID
LF5050 LF5050 Pitot adapter lubricating fluid
PSD60-2R
calibration • Percent of battery capacity displayed
• Simulates compensator capacitance value for dry calibration • Self-test on power-up
• Measures the insulation resistance of tank units and aircraft harness • Manual or Auto Ranging
• Measures coax center conductor to shield for fault isolation • 2 and 3 Wire Megger
• Display of capacitance resolution to 0.00 pF for accurate individual tank unit • Compliant with Boeing Spec 10-61959 Rev H
testing (to 199.99 pF • MIL-STD-810 Method 511.4 certified
• Features: • Traceable to NIST
• Compatible with AD 98-20-40 & AD 99-03-04 compliant aircraft (Mod 6 and • Tests any AC or DC capacitive fuel, water, LOX/engine oil or other
above)
• Modular design for high reliability and low maintenance
• Closed box calibration using front panel controls – performed annually Weight: 13 lb
• Battery powered with percent of charge displayed Dimensions: 10.6 × 14 × 6.5 in
• Maintenance codes displayed to aid in troubleshooting Temperature range: Operating: -40°C to 55°C
Storage: -51°C to 71°C
• Distance-to-Fault (DTF) Mode determines the “length” of the wire or the
approximate distance to a break in the wire or shield
• Large selection of aircraft specific interface cables readily available
*Aircraft-specific cables are required and must be purchased separately. EDMO# MFR# DESCRIPTION
PSD90-1C61 878 Universal AC/DC capacitance test set
PSD90S-F16 88751 Fuel quantity system interface
Weight: 12 lb
ACCESSORIES
Dimensions: 14 × 6.5 × 10.6 in
PSD40-524A 38647 Reverse polarized BNC to BNC female connector
Temperature range: -25°C to 55°C
PSDAFC130A 57978 Fuel quantity cable C-130B H analog
PSDAFC130D 57979 Fuel quantity cable C-130B H digital
7
EDMO# MFR# DESCRIPTION The DFQ40K has the ability to measure
PSD737-1 57268 Interface unit for Boeing 737-600/700/800 (without the insulation breakdown of tank units,
Densitometer) wiring and connectors associated with
PSD757-1 723 Interface unit for Boeing 757 the system, capacitance of the tank
PSD757/767 725 Interface unit for Boeing 757/767 units which measure the level of fuel
in the tanks and simulation of capaci-
ADAPTERS FOR DIGITAL GAUGES
tances required to test and calibrate the
PSD40-502 58303 Adapter for B727, B737, B747. Includes manual and CD aircraft indicating system. An additional
PSD40-5023 58306 Adapter for B737, wing tanks troubleshooting mode provides a relative
indication of a problem associated with
the Phase of the return current.
• Microprocessor based
• Completely self-contained AC capacitance fuel quantity test system
DIGITAL DC FUEL QUANTITY TEST SET
• Measures capacitance, insulation, DC voltage, resistance and distance to
BARFIELD fault
The compact and lightweight DC400A is • Capacitance simulation and indicator testing
a complete fuel quantity system test set
for use on aircraft that have probes with • Custom multi-line backlit graphic display
integral diode rectification, commonly • Direct keypad entry of Tank and Comp simulation values
called “DC” fuel quantity systems. Com- • Uses all existing fuel quantity cables & new generation of Smart Cables to
pletely self-contained and portable, the perform Automated Test Routines
DC400A is lightweight and as an internal
battery-powered DC fuel quantity system. • Calibration date available from display with user alerts to approaching
The tester is specifically designed, when calibration date
used with the proper Adapter Module, to • Powered from common “C” batteries with auto-off feature
meet the requirements for testing and
calibration of a wide range of Aircraft DC
Fuel Quantity Systems. The Interchange-
able adapter modules customize the Weight: 10 lb
DC400A to interface directly with a specific aircraft without the need for an Dimensions: 12 x 6 x 14 in
external adapter cable. The digital monitor function monitors the fuel quantity
indicator/signal conditioner output directly in pounds, volts, ratio, etc., depend-
ing on the module.
• Capabilities include bench checking aircraft fuel quantity system compo-
nents and testing all major components and circuitry in the aircraft’s DC fuel
quantity system COUNT ON EDMO TO HAVE
• Provides direct digital LCD readout of probe capacitance EXACTLY WHAT YOU NEED,
• Digital readout of quantity system output in (volts, pounds, ratio, etc.) WHEN YOU NEED IT.
EDMO Distributors is an independent wholesale
Weight: 4.5 lb distributor of aircraft electronics and accessories with
Dimensions: 5.3 × 12.2 × 10.4 in a central office located in Spokane, Washington and a
product warehouse located in Nashville, Tennessee. Give
us a call at 1.800.235.3300 or visit edmo.com for parts
EDMO# MFR# DESCRIPTION and pricing.
DC-400A 101-00850 Digital DC fuel quantity test set
7
390XOPT401 83384 Auto-test II for DMR radio systems
• Sensitive receiver for making accurate measurements
390XOPT402 84413 DMR XML channel logger option (requires 390XOPT400).
• 2.7 GHz RF frequency range for generate and receive 390XOPT420 84414 DPMR-ETSI 102-658 option
• Full spectrum analyzer and tracking generator with displayed average noise 390XOPT440 84416 NXDN option
level of -140 dBm 390XOPT441 84417 Auto-test II for NXDN radio systems (requires: OPT440)
390XOPT460 84418 ARIB T98 option
390XOPT600 83385 Motorola ASTRO 25 series auto-test & alignment software
Weight: 36.8 lb 390XOPT602 84422 Motorola ASTRO 25 series XTL power auto-test &
Dimensions: 7.75 × 14 × 20.5 in alignment software
Input power: 125 W max 390XOPT603 83387 TIA/EIA-603 FM land mobile test software option
Frequency range: 2 MHz to 2.7 GHz 390XOPT604 84421 Motorola APX series auto-test & alignment option
Internal battery: 2.5+ hours of operation 390XOPT606 87372 EF Johnson ES series auto-test & alignment software
Rugged: 30 G Shock, MIL-STD 28800F Class 3 390XOPT607 87371 BK DPHX5102X series auto-test & alignment software.
(requires: OPT200, OPT218 and OPT061)
Systems supported: FM, AM, P25, P25 Phase II TDMA, HPD, DMR, dPMR,
NXDN, SmartZone and SMARTNET, TETRA, LSM 390XOPT608 90946 Kenwood P25 5X10 series (REV 3 hardware only) auto-
test & alignment software
(requires: OPT200, OPT218 and OPT061)
390XOPT610 89818 Motorola MOTOTRBO radio series auto-test & alignment
software
EDMO# MFR# DESCRIPTION 390XOPT611 90676 Motorola TETRA MS (MTP-850 SERIES) auto-test software
includes OPT54 (requires: OPT110 and OPT115)
3920B 91164 Digital radio test set 1MHz - 1GHz | standard analog
duplex operation and DMM 390XOPT616 90966 Harris P7300, P5500, XG75 series auto-test alignment
software
OPTIONS
390XOPT624 139348 Collins 721S blade Auto-Test with Interface cable and 10
390XOPT051 83352 Site monitoring application dB attenuator (requires OPT616 and OPT061)
390XOPT054 83353 IQ Gen modulation option 390XOPT625 91955 Harris P7300, P5500, XG75 series advanced auto-test &
390XOPT055 83354 Audio analyzer option alignment software (requires: OPT616, OPT200, OPT218
and OPT061)
392XOPT058 83390 2.7 GHz frequency range extension option
390XOPT626 91705 DMR repeater auto-test software option
390XOPT059 83355 Auto-test II analog option
390XOPT627 91956 KNG command series auto-test & alignment
390XOPT060 83356 Harmonics and Spurious measurements option (requires: OPT200, OPT218, and OPT200)
390XOPT061 83357 Tracking generator option 390XOPT628 91957 Hytera DMR series auto-test and alignment
390XOPT064 83358 Analog duplex power between markers option 390XOPT631 91960 Kenwood NXDN series auto-test & alignment
390XOPT067 92573 POCSAG option (requires: OPT440, OPT441, and OPT061)
390XOPT090 84410 Chinese GUI option 390XOPT633 112997 EF Johnson VIKING series auto-test & alignment
(requires: OPT200, OPT218, and OPT061)
390XOPT110 83359 TETRA mobile station testing option
390XOPT636 139148 Relm KNG S-series (Portables only) auto-test & alignment
390XOPT111 83360 TETRA base station testing option (requires: OPT200, OPT218, OPT061)
390XOPT112 83361 TETRA direct mode testing option 390XOPT637 140637 P25 Harris XL200P auto-test & alignment
390XOPT114 83362 TETRA energy economy mode (requires 390XOPT110) (requires: OPT200, OPT218, and OPT061)
390XOPT115 85543 TETRA auto-test II 390XOPT639 141377 Autotest only option for TAIT DMR for TP/TM 9300 series
radios (requires: OPT400, OPT401, OPT061)
390XOPT200 83363 P25 conventional operation (with DES OFB Type III)
390XOPT640 141378 Kenwood NX-5000 & TK-5X30 P25/NXDN/DMR series
390XOPT201 83364 P25 trunking operation VHF, UHF, 700, 800 MHz auto-test & alignment option (requires P25/NXDN/DMR
390XOPT204 83365 LSM generate and receive analysis option software)
390XOPT206 83366 P25 control channel logger option 390XOPT641 141437 Kenwood P25 Viking VM/VP 5X30 Series Auto-Test &
390XOPT207 83367 Smartnet/smartzone option Alignment Option (requires: OPT200, OPT218, & OPT061)
390XOPT209 62377 KVL keyloader | includes installed software and cable 390XOPT642 141994 HYTERA DMR Repeater Auto-Test & Alignment Option
assembly (requires OPT400)
390XOPT210 83368 Analog simulcast option 390XOPT645 140899 P25 Motorola apx- B series auto-test & alignment option
(requires OPT200, OPT218, OPT061, OPT604 and
390XOPT212 83369 Explicit mode trunking option AC24011).
*continued on next page
AIRFRAME/POWERPLANT The TT1000A includes an automatic digital display that practically eliminates
human error and reduces testing time to a minimum. The test leads incorporate
TEST SETS automatic temperature compensation to remove induced voltage caused by a
“Cold Junction” created when the test leads are attached to the aircraft.
All of the features designed into the TT1000A have been added to reduce
maintenance time and cost as well as provide a maintenance friendly tester for
TT1200A DIGITAL TURBINE TEMPERATURE measuring and displaying resistance of thermocouple, thermocouple rings, and
TEST SET system lead circuits.
BARFIELD
The TT1200A Digital Turbine Temperature
Test Set tests digital and glass cockpit Weight: 4 lb
indicators. It tests the aircraft Chromel/
Battery: 8 x 5.5 x 5 in
Alumel (K type) turbine temperature mea-
suring systems with the ability to measure Temperature range: Certified: 0°C to 1,000°C
Extended: -60°C to 1,160°C
resistances to 0.001 ohms, measures
insulation up to 200M ohms, performs in-
dicator run-outs with a resolution of 0.1ºC
or 1º C and a range of 1372ºC. It can also
EDMO# MFR# DESCRIPTION
7
display the equivalent ºF or millivoltages
and may be used as a master indicator. TT-1000A 101-00901 Digital Turbine Temperature Tester
This microprocessor based, completely ACCESSORIES
self-contained, battery powered unit is TT1200A 101-00907 101-00907 TT1000A adapter cable
housed in a rugged, high visibility case.
115-00215 115-00215 Cable
• 16-charactar alphanumeric LCD 137-08001 137-08001 DC voltage converter, 45V (replaces part
• Thermocoupler and lead measurements to 0.0001Ω and insulation measure- #415, 45V DC battery)
ments up to 200MΩ 137-08002 137-08002 DC voltage converter 9V battery to 45V.
(replaces battery pack part # 415)
• Simulates thermocouple outputs and system lead resistance from 2Ω to 25Ω
Weight: 7.3 lb
Dimensions: 7 × 11 × 10 in PRATT & WHITNEY VIDEOSCOPE INSPECTION
Accuracy: ±5% of reading for ±5 counts (200 KΩ, and 20 MΩ KIT
ranges)
USA BORESCOPES
Excitation: 45 VDC (nominal)
Simulated system resistance: Adjusted range: Less than 2Ω to >25Ω
Portable video borescope kits provide
Fixed setting: <0.01Ω high-resolution video with excellent quality
Temperature measurement: K type (CH-AL thermocouple) and details. Borescopes allow technicians to
-25°C to 1,200°C (certified), 50°C to 1,372 (extended) inspect remote and difficult areas to reach
Temperature range: 14°F to 122°F (-10°C to 50°C) while recording video and pictures for future
reference. Pratt & Whitney video inspection
kits are ideal for inspecting turbine and
generator type engines.
EDMO# MFR# DESCRIPTION • Performs high-resolution video and picture
TT1200A 101-00930 TT1200A Test Set
recording
102-00932 102-00932 TT1200A Test Set kit | Includes Test Set, CF6-80A, A1, • 4 mm inspection scope
A2 Application) • Two- or four-way articulation
ACCESSORIES • 1,500 mm working probe length
175-00215 175-00215 Cable assembly
• Tungsten sheathing
• Built-in LED lighting
• Rechargeable lithium-ion batteries
Weight: 3 lb
Dimensions: 9.8 x 7.8 x 7.5 in
Temperature range: Operating: 0°C to 40°C
Storage: -20°C to 60°C
SC063 SIGHT COMPASS
BARFIELD
The SC063 is a portable, self-contained
calibration device used to check mounted
EDMO# MFR# DESCRIPTION aircraft compasses. This device consists
of a modified aircraft compass which
2311FA 101-00212 Pressure tester
has been re-screened to indicate 180
ACCESSORIES degrees from normal. The SC063 allows
304-00004 304-00004 Pressure gauge with standard accuracy | 0-200PSI the operator to stand facing the aircraft
304-00005 304-00005 Pressure gauge with standard accuracy | 0-600PSI making it considerably easier to transmit
304-00006 304-00006 Digital pressure gauge, 0.1 PSI accuracy | 0-200 PSI signals to and from the aircraft cockpit.
304-00007 304-00007 Digital pressure gauge, 0.1 PSI accuracy | 0-500 PSI The SC063 is unique in that the compen-
sating magnets have been removed and a
304-00100 304-00100 Pressure gauge, inspector accuracy | 0-60 PSI
combination magnifying lens and collimating sight added.
304-00101 304-00101 Pressure gauge, inspector accuracy | 0-100 PSI
304-00102 304-00102 Pressure gauge, inspector accuracy | 0-160 PSI
304-00103 304-00103 Pressure gauge, inspector accuracy | 0-300 PSI
304-00104 304-00104 Pressure gauge, inspector accuracy | 0-600 PSI Weight: 0.72 lb
Dimensions: 2.36 x 2.75 x 3.34 in
Includes: 5’ 6” monopod support & protective carrying case
7
10-3200158 10-320-0158 Cable Sensor
ANALYZERS 10-3200251
10-3200488
10-320-0251
10-320-0488
Cable interface | BK117 Cabin
Cable, adapter, strobe | I/F to STRB/ACCY
10-1001773 10-100-1773 Optical phototach
Z2020HR PROBALANCER ANALYZER KIT 10-1000486 10-1000486 Phototach mount | Bell-206 & Augustawestland
109 TR
ACES SYSTEMS 22-4300084 22-430-0084 Mag pickup mount | Schwiezer269C & Hughes
The Model 2020HR ProBalancer Analyzer 369, M/R vibration
provides step-by-step on-screen instruc- 22-4300085 22-430-0085 Interrupter mag | Schweizer 269C & Hughes 369
tions for performing propeller balancing, 22-4300086 22-430-0086 Sensor mount | Schweizer 269C & Hughes 369,
rotor track and balance measurements and M/R vibration
vibration surveys. Additionally, the user may 22-4300087 222-430-0087 Phototact mount | Bell-206, M/R
extend the basic capabilities by defining 69-1000075 69-100-0075 Vibration sensor
and saving “setup information” for common
procedures. These saved settings can be
recalled later to provide on-screen setup
information, consistent procedures and one-
shot balance solutions without the difficulty
of configuring the unit and re-entering data
COBRA II DUAL CHANNEL VIBRATION &
each time it’s used. BALANCING ANALYZER
• Dynamic propeller balancing ACES SYSTEMS
• Vibration Surveys and Spectrum Analysis The COBRA II Dual Channel Vibration
Analyzer is a versatile yet compact in-
• Graphic spectral display with curser, expanded views, and backlight strument that combines all of the diverse
• Duel channel, simultaneous inputs technologies required for high-end engine
• Maintains prior influences to compute one-shot balance vibration analysis, rotor track and balance,
and propeller balance into one tool. With
• Programmable propeller balance influences Split weights to existing holes the Cobra II, all of these maintenance
(available with EPS) functions can be easily performed on
• Supports multiple sensor types Powered by rechargeable batteries or by virtually any airframe and engine type,
aircraft power such as a 2-propeller helicopter.
• Large, high-resolution, transmissive,
full-color display with a super-bright
Weight: 4.8 lb LED backlight that can be easily viewed
in direct sunlight
Dimensions: 9.3 x 7.5 x 4.4 in
Voltage: 12 VDC battery or 14-28 VDC external power • Generate PDF reports directly from the analyzer and store on a USB flash
Power supply: Camcorder Type Battery Model RB 85 or Equivalent
drive to be printed or saved in a separate location to retain accurate mainte-
(12V, 2.3 A hour internal lead acid battery) nance records
Accuracy: Vibration Amplitude: +/- 5%, 0 - 10 IPS • Data storage, transfer, display and analysis is independent of any proprietary
Frequency Range: 0 - 10K Hz software and a PC interface
Tachometer Inputs: +/- .3%, 100 - 10,000 rpm
Operation Time: 10 – 12 hours (optimum) • Application notes and eSetups are now available to download directly to the
analyzer via the web
Charging Time: 2 hours
Temperature range: Operating: 0ºC to 50ºC
Weight: 6 lb
Dimensions: 10.5 x 9.75 x 5 in
*continued on next page
Weight: 2 lb
Dimensions: 7.5 × 1.25 × 4 in
Power supply: 4 AA NiMH rechargeable batteries (not included)
Frequency range: 300-6000 RPM
Operating temperature: -20 to 70 C
7
inspection, analysis, and testing methods BARREL ASSEMBLIES
throughout the fiber network; and used to FBPP-BAP1 FBPP-BAP1 Barrel assembly for probe standard configuration
install, test, and maintain fiber systems
where portability is essential such as in FBPP-BAP3 FBPP-BAP3 Barrel assembly for P5 probe, narrow type for use
with guides
FTTX, BPON/EPON/GPON, FTTA, and data centers.
FBPP-BAP4 FBPP-BAP4 Barrel narrow 2.5mm
• Automated pass/fail analysis for fiber inspections and tests
FBPPBAP3A6 FBPP-BAP3-A6 Barrel assembly for P5 probe, narrow type with 60
• On board storage for fiber inspections and test results degree angle for use with guides
• Easily generates fiber certification reports FBPTP31100 FBPT-P3-1100 Long barrel assembly for use with P5000I, 11 Inch
with ribbon drive
• 3.5-inch color touchscreen
FBPT-P3750 FBPT-P3-750 Long barrel assembly for use with P5000I, 7.25
inch with ribbon drive
DIGITAL ANALYSIS MICROSCOPE
TIPS
The P5000i is a digital handheld micro-
FBP3-C130 FBP3-C130 Interface tip for long reach video probe P3
scope that automatically inspects and
certifies the end faces of fiber connec- FBP3-UA FBP3-UA Long reach series single tip adapter
tors according to industry standards and
FBPT-C130 FBPT-C130 Interface tip for standard video probe P5 for use
specifications. This digital microscope with locking guides
provides instant pass/fail results at the FBPT-ELIO FBPT-ELIO Inspection tip elio socket
push of a button, eliminating subjective
and time-consuming guesswork. Compatible with multiple platforms, including FBPT-LC FBPT-LC Tip LC bulkhead
T-BERD®/MTS-2000/4000/5800/ 6000A, 8000v2, HST-3000, Certifier40G, Cell FBPT-LCA6S FBPT-LC-A6S Probe tip LC bulkhead, square angled 60 degrees.
Advisor JD720C, laptops, PCs, and Android mobile devices, the P5000i provides
fast, repeatable analysis that easily integrates into existing test procedures. FBPT-MIL1S FBPT-MIL-1S Tip MIL 29504-14-15 sockets
The world’s leading manufacturers, installers, and service providers already FBPT-MIL2P FBPT-MIL-2P Tip MIL 29504-4-5 pins
rely on Viavi Solutions to certify their fiber connectors. Whether testing on the
FBPT-MIL2S FBPT-MIL-2S Tip MIL 29504-4-5 sockets
production line or in the field, the P5000i gives any technician that handles fiber
the same capabilities in the palm of their hand. FBPT-RQX8P FBPT-RQX8-P Tip radiall quadrax, size 8 pin
• Connects via USB with multiple devices including Viavi tools, laptops/ PCs, FBPT-RQX8S FBPT-RQX8-S Tip radiall quadrax, size 8 socket
and Android mobile devices
FBPT-SC FBPT-SC Tip SC bulkhead
• Repeatable pass/fail analysis eliminates subjective guesswork from the
measurement process FBPT-SCAPC FBPT-SC-APC Tip SC-APC bulkhead
• User-selectable acceptance profiles allow certification to any acceptance FBPT-SMA FBPT-SMA Tip SMA bulkhead inspection tip
criteria FBPT-SMA-P FBPT-SMA-P Tip SMA bulkhead pro version
• Includes FiberChekPRO™ software for analysis and reporting with laptops/ FBPT-U12M FBPT-U12M Tip universal 1.25mm patch cord
PCs
FBPT-U12MN FBPT-U12M-N Tip 1.25MM MIL, narrow, universal
• Automatic image centering ensures the fiber always appears in the center of
the screen FBPT-U25M FBPT-U25M Tip universal 2.5mm patch cord
• Detailed report generation to certify and document results FBPT-U25MA FBPT-U25-MA 2.5mm universal inspection tip / for APC SC, FC,
ST, and E2000 patch cord
• Dual magnification (200X and 400X) functionality provides high-level and
detailed inspection and analysis FBPT-U25MN FBPT-U25M-N Tip patch cord 2.5MM narrow
• Magnification toggle button allows easy switching in both live and analysis FBPTMIL2PX FBPT-MIL-2P-X Inspection tip modified to 0.064 BORE1-REV01
views FCLT-MIL2 FCLT-MIL2 Cleaning tip MIL 29504-4-5
• Accepts FBPT series tips for comprehensive support for all connector types FCLT-U12 FCLT-U12 Cleaning tip universal 1.25mm bulkhead for
used in today’s network CleanBlast
FCLT-U25 FCLT-U25 Cleaning tip universal 2.5mm bulkhead for
CleanBlast
MB2-JSF-V2 FBP3-MT-MB2- MT Motherboard (JSF), 2 Position probe tip for
JSF-V2 FBP3 long reach probe with ribbon drive
7
• Essential optical test kits for enterprise and service provider applications • Future-proofed, highly modular platform with field-upgradeable options and
• Certify standard, high dynamic, and high power applications modules increases productivity
• Auto-wavelength and TWINTest features for error-free and efficient testing • StrataSync™ cloud-enabled software option increases field productivity
• Permanent reference-level storage • Field-upgradeable VFL, power meter, talk set, and video inspection scope
options
• Fast result download and report generation with SmartReporter freeware
• Multi-service capability for Ethernet and SONET/ SDH tests
• OMK-3x kits includes: power meter with USB port & Light source with switch-
able adapter • Perform bidirectional OTDR and loss test set measurements
• Perform 10 G, 10 GE, and 40 G fiber dispersion testing (PMD/CD/AP)
OMK-35 OPTICAL TEST KIT • Optical spectrum analyzers for use installing and maintaining CWDM/DWDM
Dual-wavelength single-mode optical test kit with a single-port laser source and networks
a power meter with a UPP interface for power level and loss test measurement • Test 10 GE LAN- and WAN-PHY at 850, 1310, and 1550 nm
in access, metro, and core networks.
WITH 50 YEARS OF
EDMO# MFR# DESCRIPTION
2127/02 2127/02 OMK-35 Optical Test Kit
2127/04 2127/04 OMK-36 Enterprise Quad Test Kit EXPERIENCE IN THE INDUSTRY,
EDMO KNOWS QUALITY.
Give us a call at 1.800.235.3300 or visit edmo.com for
parts and pricing.
7
designed to clean connectors residing in an adapter or faceplate and unmated
connectors. This cleaning tools use a dry cleaning strand to gently sweep and through the antenna and also detects the
lift away dust and residues from the connector end face. presence of a 121.5 MHz signal.
• Quickly and easily program the full line of ARTEX General Aviation ELTs with
the desired protocol, NAV Data Baud Rate, and required information with the
included cable
Weight: 39 g (9392)
40 g (12910) • Records all data into an internal database which can be backed up to a PC
38 g (13309)
68 g (13310) • View the data from a computer independent of the TPS 8715 including the
time stamp as proof of transmission and proper programming
Dimensions: 208 x 17.5 x 17.5 mm (9392) • Print via the USB interface to a PC (software download required)
215 x 17.5 x 17.5 mm (12910)
177 x 17.5 x 17.5 mm (13309)
194 x 23 x 34 mm (13310)
Weight: 1 lb (with antenna)
Style: Port cleaner push style Dimensions: 6.7 x 3.7 x 1.53 in (without antenna)
Removes the following Arizona road dust (ISO 12103-1) 406.025 receiver range: -60 dBm to 36 dBm (5W signal)
contaminates: Skin oil residue Decoding: Per Cospas-Sarsat C/S T.001 (Issue 3, Revision5)
Salt water residue
Alcohol residue Microprocessor: 400 MHz Samsung
Vegetable residue Memory: Volatile: 64 MB SDRAM
Hand lotion Non-volitile: 128 MB Flash
Distilled water residue Expansion: via MZIO™ bus standard
Graphite
T-shirt lint Display type: TFT LCD high brightness touch screen
Display Resolution: 240 x 320 pixels
Display viewing area: 3.5 in
Communications: USB: 1 MB/sec
Serial: 1,200 to 115,000 bits/sec (RS232)
Infrared: (IrDA):1,200 to 115,000 bits/sec at 1 meter
EDMO# MFR# FERRULE COMPATIBLE CONNECTOR
SIZE TYPES Communications connector: 13-pin (custom with gold plated pins)
Battery: Charging current: 1.2A, maximum
9392 9392 2.5 mm SC, ST, FC, E2000 Charging input: 12 VDC
12910 12910 1.25 mm ARINC 800, ODC series, MXL38999, LuxCis RFI/EMC: CSPR22, CSPR24 (RF emissions and ESD immunity)
series, MIL PRF 64266 [NGCON], Neutrik FCC/CE/Sealing: Part 15, Class A/EU EMC Directive/IP67
opticalCON (submersible to 1 meter for 30 minutes)
13309 13309 1.6 mm M38999 Current consumption: Power on: 130 mA, typical (Measure only, backlight off)
Full system: 60 mA, typical
13310 13310 2.5 mm SC, ST, FC E2000, & TFOCA Sleep mode: 7 mA, typical
Operating System: Windows CE 5.0/Gamet OS 5.4
Temperature range: Operating: -10°C to 60°C
Storage: -20°C to 65°C
col, NAV Data Baud Rate, and required information with the included cable
• Records all data into an internal database which can be backed up to a PC • Measures RF parameters along with modulation details on 406, 121.5 and
243 MHz
• View the data from a computer independent of the TPS 8700 including the
time stamp as proof of transmission and proper programming • Powerful 406 MHz graphic measurements for power, phase modulation and
in-band spectrum
• Print via the USB interface to a PC (software download required)
• Internal antenna receives 406 MHz burst up to 10 meters away or directly
connect the beacon to tester at 50Ω
• Receives full RF power with no attenuator required
Weight: 1 lb (with antenna)
• User-defined cable loss factor
Dimensions: 6.7 x 3.7 x 1.53 in (without antenna)
406.025 receiver range: -60 dBm to 36 dBm (5W signal) • Interfaces easily to a PC through a direct connection, wifi, or USB drive
Decoding: Per Cospas-Sarsat C/S T.001 (Issue 3, Revision5) • Cospas-Sarsat Second Generation Beacon (SGB) ready
Microprocessor: 400 MHz Samsung
Memory: Volatile: 64 MB SDRAM
Non-volitile: 128 MB Flash
Expansion: via MZIO™ bus standard Weight: 0.49 lb
Display type: TFT LCD high brightness touch screen Dimensions: 5.31 x 2.76 x 2.0 in
Display Resolution: 240 x 320 pixels
Dynamic range: 406 MHz: -20 dBm to +40dBm, bust
Display viewing area: 3.5 in 121.5/243 MHz: -5 dBm to 35 dBm
Communications: USB: 1 MB/sec Power input: +43 dBm, burst
Serial: 1,200 to 115,000 bits/sec (RS232) +33 dBm, continuous
Infrared: (IrDA):1,200 to 115,000 bits/sec at 1 meter
Ingress rating: IP68
Communications connector: 13-pin (custom with gold plated pins)
Battery: Charging current: 1.2A, maximum RF range: 406 MHz: >10 m
Charging input: 12 VDC 121.5 MHz: >1 m
RFI/EMC: CSPR22, CSPR24 (RF emissions and ESD immunity) RF input VSWR: 1.20:1
FCC/CE/Sealing: Part 15, Class A/EU EMC Directive/IP67 (submersible to RF cable termination: BNC (female)
1 meter for 30 minutes)
Temperature range: Operating: 5°C to 55°C
Current consumption: Power on: 130 mA, typical (Measure only, backlight off) Storage: -20°C to 60°C
Full system: 60 mA, typical
Sleep mode: 7 mA, typical Includes: BT200 test unit, RF input cable, USB interface cable,
OTG/USB cable, operator’s manual, AC adapter,
Operating System: Windows CE 5.0/Gamet OS 5.4 hard case, screen cleaning cloth, and certificate of
Temperature range: Operating: -10°C to 60°C calibration
Storage: -20°C to 65°C
ACCESSORIES
500-3000 500-3000 30 dB attenuator
611-0024 611-0024 In-line test harness for Artex ELTs
611-6013 611-6013 Coax antenna cable with BNC connectors | single output ELTs
611-6013-04 611-6013-04 Coax antenna cable with BNC connector | 6 ft length
611-6052 611-6052 Teflon coaxial antenna cable, TNC to TPS | 6 ft length
611-9010 611-9010 Coax cable, TPS & BNC connectors | dual output ELTs
TEST BENCH • Automatically map the location of the decoded GNSS location data into Goo-
WS TECHNOLOGIES, INC gle Earth™ for easy viewing and access to a detailed geographical interface
EDMO# STB100 • Data is XMP formatted for use in database applications
MFR# STB100 • Can send alerts via email and/or with a time stamp
The STB100 is a bench top beacon test • Connects to a user’s PC with a USB cable or ethernet interface which allows
unit that is perfect for maintenance for remote management and diagnostics; power is supplied through the
facilities, test facilities, beacon manu- connection through a connection to a USB port or an AC adapter
facturers, and beacon developers. The
STB100 tests 406 MHz, 121.5 MHz, 243 • Multiple units can be connected together for a wider range of coverage
MHz, and performs 406 MHz frequency • Includes USB cable (2 meter length), AC to USB adapter, ethernet cable (2
stability. It has accurate DC current and meter length), molded 406 MHz monopole antenna, GPS active antenna (5
voltage sensing that allows for the char- meter length), certificate of calibration, operator’s manual, and user interface
acterization of the DC power supplied to a beacon. It also measures leakage software
current down to 200 nA and incorporates dual temperature probes to add tem-
perature data to each measurement. The I/O interface has 2 relays, 8 analog
I/O lines, 8 ADC input lines to use with user-defined functions. An internal GPS
receiver allows for delta distance measurement for location encoded beacons. Weight: 0.5 lb
The STB100 connects to a PC while an optional API set allows advanced users Dimensions: 4.3 x 2.5 x 1.0 in
7
to create their own customized user interface to control the unit. 406 MHz sensitivity: -125 dBm
• Measures all 406 MHz, 121.5 MHz, 243 MHz parameters Out of band rejection: >145 dB (<400 MHz, >413 MHz)
• Direct 50 RF input with the need of an attenuator Harmonic image rejection: >95 dB
406 MHz input frequency: 406–406.1 MHz
• Monitors the DC power supply to a beacon from 1–30 VDC, 5mA to 8A
406 MHz RF input VSWR: 1.20:1
• Vin to Vout low dropout voltage of 100mV/A 406 MHz input impedance: 50Ω
• Measures beacon leakage current down to less than 200 nA 406 MHz input connector: SMA (female) RP
• Overload protection GPS antenna port bias/ +3.3V @ 40 mA max
connector:
• Streams measurement data is saved into delimited text files for easy
analysis GPS antenna connector: SMA (female)
Receiver power requirements: 5V @ <500 mA (from USB port)
• Connect up to two external temperature probes
Temperature range: Operating: -40°C to 85°C
• User-configurable with API set Storage: -55°C to 85°C
• Cospas-Sarsat Second Generation Beacon ready
Weight: 6 lb (2.73)
Dimensions: 8.3 x 11.1 x 2.5 in (210 x 280 x 64 mm)
TSE100B SCREEN BOX
WS TECHNOLOGIES, INC
EDMO# TSE100B
MFR# TSE100B
Designed specifically for testing
FBM200A 406 ELT BEACON MONITOR Cospas-Sarsat beacons, the TSE100B
Screen Box provides the ideal solution
WS TECHNOLOGIES, INC
for testing ELT, EPIRB or PLB units in
EDMO# FBM200A
combination with a BT100, BT200, or
MFR# 910-FBM200A
STB100 series beacon testers. The
The 406 ELT Beacon Monitor from WS TSE100B Screen Box allows for verifica-
Technologies, Inc. provides real-time tion of an ELT in normal activation mode
monitoring for all Cospas-Sarsat 406 — not just in self-test mode. This gives
MHz beacon transmissions. This device users the confidence when verifying a
displays and decodes 406 messages with beacon’s encoded GPS capabilities and
the ability to automatically receive all testing the G-switch without worrying
past, present, and future Cospas-Sarsat about trigging false alerts. The technician retains full control of the ELT and
channels. All information is organized beacon tester with its patented screened gloves, RF shielded window, and
in an XML format for use in a database; interior illumination. The TSE100B is prefect for use on the bench top or as a
additionally, information can be time- lightweight and portable RF screen box out in the field. Verifies ELTs in normal
stamped and data logged. A GPS antenna activation mode
and receiver allow the user to obtain
• Verifies the beacon’s GPS
precise geographical data which is then
automatically mapped to Google Earth__, making it easy to view the GNSS loca- • Will not cause false alerts
tion data with Google’s detailed array of mapping features. Users can connect • Tests the G-switch in a shielded environment
it to their PC via USB or Ethernet cables - the latter has the added benefit of
allowing users remote management and diagnostics options.
• Monitors 406 ELTs in real time, displays and decodes messages, measures
Weight: 16 lb
and displays RSSI (receive signal strength), and displays distance to beacon
Dimensions: 18 x 12 x 12 in (outside)
• Automatically receives all past, present, and future Cospas-Sarsat channels 17 x 11 x 8.5 in (inside)
with -125 dBm sensitivity (software adjustable sensitivity) Shield effectiveness: >90 dB for 121.5, 243, & 406 MHz
Power requirements: USB: 5V <500 mA
• Accurately measures any ELT’s output power and frequency on 121.5, 243, Battery: 9 volt | NEDA Type 1604A
and 406 MHz Compatible beacons: DK100, DK120, DK130 and DK140
• Verifies proper decoding of the ELT’s ID, GPS location, country code, serial
number, and other ELT data
• Works with any smart phone, tablet, or laptop computer — no apps to down-
load — just wifi and a browser is all that is needed EDMO# MFR# DESCRIPTION
• Includes an antenna for over-the-air testing, and also an attenuator and TS-200 TS200 ULB Test Set
cables to connect directly to an ELT ACCESSORIES
CT-200 CT200 Calibration Kit For TS200/TS300
Weight: 5 oz
Dimensions: 3.3 x 2.1 x 0.8 in
7
user-friendly interface and includes a EDMO# MFR# DESCRIPTION
6021-5154
Setup Wizard, Named Menu Keys, and 6021-5054 6021-5054 Avionics TDR kit with soft carrying case
Context-Sensitive help. Internal cable elist 6021-5154 6021-5154 Avionics TDR Complete Kit with hard case
holds 64 cable types, can be user edited, and modified lists can be uploaded or ACCESSORIES
downloaded to a PC using ETDR PC Vision™ software. AEA Technology offers
6021-2400 6021-2400 BNC to pin and socket set | Includes: assembly cable
two TDR purchasing options to accommodate the user’s accessory needs: the to #12, 16, 20, and 22 pins and sockets
Avionics TDR Complete Kit with hard case and test leads or the Avionics TDR 6021-5000 6021-5000 E20/20 TDR broadcast option | N connector
with padded carrying case.
6021-5041 6021-5041 E20/20F TDR CATV option | F & RJ45 connectors
• Vision™ software and training presentation 6021-5042 6021-5042 E20/20F TDR TELCO option | F & RJ45 connectors
• EMI shielded interior protects against RF interference and emissions 6021-5053 6021-5053 E20/20B TDR VDV/RF option | RJ45 & BNC
connectors
• Accurate and clearer trace indication of faults with MicroFault locating for
finding even small coax kinks 6022-2401 6022-2401 6 ft Coax test lead | BNC male to BNC female
AEA Technology
SWR SITE ANALYZER • Simultaneously view two separate plots with different scales
AEA TECHNOLOGY, INC. • Large numeric display in CW mode
The SWR Site Analyzer measures VSWR, • S11 and S21 test ports
return loss, and frequency domain reflectom- • 250 memory slots for both plot storage and setup data
eter (FDR) on a frequency range of 100 KHz
to 1.4 GHz. It features a full color, backlit • Quarter VGA backlit LCD
display with excellent readability even in • Auditory cues for non-visual tuning
full daylight, and 50 memory slots allowing • Internal NiMH or NiCd recharger
users to save and recall plots on the device
or upload to a PC using the included Site • USB communication to PC
Analyzer PC Vision™ software. The SWR • Testing includes: SWR, Linear Gain or Loss, Return Loss, Log Gain or Loss,
site analyzer is designed with easy-to-use Vectored Impedance (Z), Spectrum Analyzer with Phase Angle, Power Me-
navigation menus and custom color settings ter-analog and digital, Reactance, Frequency Domain Reflectometer (FDR),
for displaying measurement plots. The included NiMH batteries provides four Resistance, Gamma Magnitude, Gamma Angle
continuous hours of operation and communicates with a PC via USB 2.0.
• Four continuous hours of operation with included NiMH batteries
• Easy to navigate menus and custom color settings for displaying measure- Weight: 1.9 lb (699 g) with soft case
ment plots Dimensions: 8.5 x 4.3 x 2.25 in (216 x 109 x 57mm)
7
• Communicates via USB 2.0 with a PC Output power: +3dBm @ 50Ω typical
• Included technical support for user training and toll free support for the life Tuning/Display Resolution: 1KHz up to 1.1GHz
of the instrument 10KHz for ~1.1GHz–2.5GHz
Battery: 8 AA Alkaline, NiMH or NiCd (2.5 to 3.5 hrs continuous)
External power: 100–240VAC | 50-60Hz supplied with unit
Memory: 250 instrument presets & data plots
Weight: 2.2 lb
Temperature range: Operating: -18°C to 50°C (0°F to 122°F)
Dimensions: 8.5 x 4.3 x 2.25 in Storage: -20°C to 70°C (-5°F to 158°F)
Frequency range: 100 KHz to 1.4 GHz Includes: Belt case, operation manual, quick start guide
Power requirements: 13.8 - 20 VDC @ 800 mA, minimum or 8xAA batteries 8 NiMH AA batteries, AC adapter, USB cable
(NiMH, Nicd or Alkaline) Echo PC Vision software, N male termination set (open/
short/50ω load), Soft equipment case
6050-5000 SWR Site Analyzer unit, N male terminators (short & 50Ω), 8xAA NiMH
Analyzer includes: batteries (installed), belt case with removable shoulder
strap, USB cable, 100 - 240 VAC adapter, Quick Start Guide,
Basic guide, CD with operating manual, training PPT, Site
Analyzer PC Vision™ Software, and Application Notes
EDMO# MFR# DESCRIPTION FREQUENCY RANGE
6050-5050 SWR Site Analyzer unit, soft padded carrying case, DC vehicle charge
Analyzer Kit includes: adapter, N to BNC adapter, and Three-way load (open load 6025-5150 6025-5150 VIA ECHO 1000SF 4 MHz to 1.0 GHz
& short), N male terminators (short & 50Ω), 8xAA NiMH 6025-5250 6025-5250 VIA ECHO 2500 4 MHz to 2.5 GHz
batteries (installed), belt case with removable shoulder
strap, USB cable, 100 - 240 VAC adapter, Quick Start Guide,
Basic guide, CD with operating manual, training PPT, Site
Analyzer PC Vision™ Software, and Application Notes.
DIGITAL MULTIMETERS
FLUKE
Weight: 1.21 lb
These Fluke Digital Multimeters display True-RMS voltage which test continuity Dimensions: 7.9 x 3.9 x 1.9 in (with holster)
and resistance. A large white LED backlight aids work in poorly lit areas.
Humidity (without 0% - 95% (10°C to 30°C)
Conveniently change batteries with the easy-open access door. Compact and condensation): 0% - 75% (30°C to 40°C)
designed for easy one-handed operation. 0% - 40% (40°C to 55°C)
Operating altitude: 2000 m
FLUKE 114 Temperature range: Operating: –20°C to +55°C
The perfect troubleshooting tool for go/no go testing. Storage: -40°C to +60°C
Its AutoVolt capability automatically switches to
measure AC or DC voltage, whichever is present. And
you can use the LoZ function to identify so-called
ghost voltage and prevent false readings.
87V INDUSTRIAL MULTIMETER
FLUKE
The Fluke 87V delivers the accuracy and
advanced troubleshooting capabilities
7
FLUKE 115 you need. Designed specifically to handle
complex signals, the 87V industrial multi-
Compact Multimeter for Field Service meter, allows the user to gain productivity
Technicians, designed to be used as a by taking the guesswork out of drive
general-purpose troubleshooting tool system troubleshooting even in loud, high
and has the ability to measure current energy, and high altitude locations.
readings with 6000 count resolution,
frequency, and capacitance. • Accurate frequency measurements on
adjustable speed drives (ASD) due to
Fluke-designed low-pass filter
• Built-in thermometer allows tempera-
ture measurements without a separate
Weight: 1.2 lb thermometer
Dimensions: 6.6 x 3.3 x1.8 in • Peak Min/Max allows capture of intermittents as fast 250 μS
• Dual display resolution – 6000 or 20,000 counts
• CAT III 1000V, CAT IV 600V safety rated
EDMO# MFR# DESCRIPTION
FLUKE 114 FLUKE-114 Digital multimeter | AutoVolt & LoZ ghost detection
FLUKE 115 FLUKE-115 Digital multimeter | Field service Weight: 355 g / 624 g (with holster)
Dimensions: 201 × 98 × 52 mm (with holster)
Battery: Alkaline battery
Life: ≈ 400 hours typical, without backlight
FC INSULATION MULTIMETER
FLUKE
EDMO# FLK 1587FC EDMO# MFR# DESCRIPTION
MFR# FLUKE 1587 FC FLUKE 87-5 FLUKE 87V Industrial multimeter
Fluke Connect + Fluke’s 1587 FC Insulation ACCESSORIES
Multimeter helps you identify tough problems, fix, 87-5/E2KIT 87V/E2KIT Industrial electrician combo kit
and wirelessly communicate your work quickly
and easily - all at a safe distance. The Fluke 1587
FC is Fluke Connect-enabled so you can download
the free Fluke Connect® Measurements app to
your smartphone and gain additional functions
• Quickly find problems by saving and comparing
measurements over time on a wireless device.
• PI/DAR timed ratio tests with TrendIt™ graphs
to identify moisture and contaminated insula-
tion problems faster
• Memory storage through Fluke Connect that saves measurements to your
phone or the cloud and eliminates the need to write down results. Reduces
errors and saves data for historical tracking over time From the company’s inception in 1971, the underlying
• Historical tracking and trending of assets to identify insulation degradation principles driving the business emphasized quality products
over time and allow real-time decisions to be made in the field with Fluke and exceptional service. 50 years later, EDMO maintains that
Connect® Assets (sold separately) vision while representing more than 300 manufacturers and
• Provides memory storage through Fluke Connect Measurements to eliminate serving commercial, corporate, military, and general aviation
the need to write down results customers in the fixed-wing and rotor markets. Give us a call at
• Includes live circuit detection to prevent insulation test if voltage >30 V is
1.800.235.3300 or visit edmo.com for parts and pricing.
detected
MILLIOHMMETER
EXTECH
The 380580 is a Battery Powered Mil- EDMO: YOUR SOURCE
liohmmeter. This milliohmmeter features a
high accuracy, a high resolution, portable FOR TESTING SOLUTIONS
milliohmmeter battery operated for field
use, four terminal Kelvin measurements, EDMO keeps its customers ahead of the curve with test
and Over-temperature and over-voltage
protection. CE certified. Complete with 8AA equipment from trusted brands like AEA Technology,
batteries, and 2 sets of test leads (4 wire VIAVI Solutions, Barfield, Artex and much more. Consult
with 4 alligator clips and 4 wire with 2 Kelvin
alligator clips). with our test equipment experts at 800.337.8378 or
• Over-temperature and over-voltage visit us online to see the full selection of test solutions.
protection Whatever your testing needs, EDMO has it all.
• 5 ranges with 100 max resolution
• Large 2000 count LCD display
• Auto-Hold and Auto-Off features
• 20V test voltage
7
Weight: 4 lb
5C BIR5C 100–250 MHz
Dimensions: 3.63 × 4.0 × 6.88 in
5D 5D 200–500 MHz
Power & frequency: 100 mW–10 kW | 0.45–2700 MHz
5E-400 5E-400 400 MHz
Connectors: “QC” N Female (BIRD 43 NF)
Female BNC (BIRD 43BNC) 5E-800 5E-800 800 MHz
5-T-MB BIR5-T-MB Dummy load with male BNC
10 WATT
10A BIR10A 25–60 MHz
EDMO# MFR# DESCRIPTION 10B BIR10B 50–125 MHz
BIRD 43 NF BIR43 Bird 43 meter | N female 10C BIR10C 100–250 MHz
BIRD 43BNC BIR43BNC Wattmeter | BNC 10D BIR10D 200–500 MHz
BIRD 43P BIR43P Peak reading wattmeter 10E BIR10E-400 400–800 MHz
10E-800 BIR10E-800 800–1000 MHz
ACCESSORIES
BIRD 4391A BIR4391A RF PEP dual element power analyst 25 WATT
4300-061 4300-061 Carrying case 25A BIR25A 25–60 MHz
25B BIR25B 50–125 MHz
25C BIR25C 100–250 MHz
25D BIR25D 200–500 MHz
25E BIR25E 400–1000 MHz
25-A SERIES RF ATTENUATOR 25H BIR25H 2–30 MHz
BIRD ELECTRONICS 50 WATT
EDMO# 25A-MFN-40 50A BIR50A 25–60 MHz
MFR# 25A-MFN-40 50B BIR50B 50–125 MHz
The 25-A series bi-directional, 25-watt RF 50C BIR50C 100–250 MHz
power attenuators provide reliable power 50D BIR50D 200–500 MHz
reduction for isolating components under 50E-400 50E-400 400–800 MHz
test conditions and providing harmonic 50E-800 50E-800 800–1000 MHz
signal analysis for comparison standards.
50H BIR50H 2–30 MHz
These attenuators boast of high-quality,
robust construction, and conservative 50-T-MN BIR50-T-MN Dummy load with male N
power ratings. 100 WATT
• Self-cooling design 100A BIR100A 25–60 MHz
100B BIR100B 50–125 MHz
• Attenuator requires no AC power
100C BIR100C 100–250 MHz
• Broadband operation
100D BIR100D 200–500 MHz
100E-400 BIR100E-400 400 MHz
100E-800 BIR100E-800 800 MHz
Weight: 9 oz (256 g) 100H BIR100H 2–30 MHz
Dimensions: 5.3 x 2.3 in (135 x 59 mm) 250 WATT
Frequency range: 1–4 GHz 250H BIR250H 2–30 MHz
Power Rating: 25 watt 500 WATT
VSWR: 1.10:1 & 1.25:1 500H BIR500H 2–30 MHz
PIM: -110 dBc, minimum 500J-1100 BIR500J-1100 1100–1260 MHZ
Humidity: 95%, non-condensing 500J-950 BIR500J-950 950–1100 MHz
Temperature range: -40°C to 40°C
ACCESSORIES
Connector: SMA, BNC, 7/16 DIN, N, TNC
CC-6 BIRCC6 4 element carrying case
EC-1 BIREC1 12 element carrying case
• Live circuit detection prevents insulation test if voltage > 30 V is detected • Tough rubber armored case
for added user protection • Self-contained protective cover
• Auto-discharge of capacitive voltage for added user protection • Live circuit warning
• CAT IV 600 V overvoltage category rating for added user protection • Weatherproof to IP54
• Remote probe, test leads, probes and alligator clips included • Intelligent Safety System for protection
7
Storage: -25°C to +70°C
Accuracy: 1% ±5 digits
• iFlex® Flexible Current Probe expands the measurement range to 2500 A AC Humidity: non-condensing (< 10°C)
≤90% RH (at 10°C to 30°C)
• Soft carrying case ≤75% RH (at 30°C to 40°C)
≤45% RH (at 40°C to 50°C)
Temperature range: Operating: -10°C to +50°C
Storage: -40°C to +60°C
Weight: 350 g Safety rating: CAT IV 600 V, CAT III 1,000 V
Dimensions: 277 x 88 x 43 mm (55 mm for remote unit)
Jaw opening: 34 mm
Frequency range: 5.0–500.0 Hz
AC current: Range: 999.9 A / 2500 A (45–500 Hz)
Resolution: 0.1 A / 1 A
Accuracy: 3% ± 5 digits
FLUKE 353 TRUE RMS 2000 A CLAMP METER
AC voltage: Range: 600 V /1000 V
FLUKE
Resolution: 0.1 V / 1 V EDMO# FLUKE-353
Accuracy: 1.5% ± 5 digits (20–500 Hz) MFR# FLUKE-353
DC current: Range: 999.9 A A versatile and rugged tool for applications with
Resolution: 0.1 A
Accuracy: 2% ± 5 digits high currents. Confidently take reliable readings with
the Fluke 353 True RMS digital clamp meter; the
DC voltage: Range: 600.0 V /1000 V
Resolution: 0.1 V / 1 V tools of choice for high current clamp-on amp meter
Accuracy: 1% ± 5 digits measurement up to 2000 A. The extra-wide jaw easily
Resistance: Range: 600 Ω/6 kΩ/60 kΩ clamps around large conductors, typically found in
Resolution: 0.1 Ω/1 Ω/10 Ω high-current applications. The extra rugged design
Accuracy: 1% ± 5 digits and CAT IV 600 V, CAT III 1000 V ratings add an extra
Humidity: non-condensing (< 10°C) element of user protection when taking high-powered
≤90% RH (at 10°C to 30°C) measurements. Accurate peak measurements can be
≤75% RH (at 30°C to 40°C)
≤45% RH (at 40°C to 50°C) taken using the in-rush current mode, ideal for motors
Temperature range: Operating: -10°C to +50°C and inductive loads.
Storage: -40°C to +60°C • Reliably handle a wide range of high-current applications with 2000A AC +
Safety rating: ANSI/ISA S82.02.01:2004 DC True-RMS, 1400A AC, and 2000A DC
CAN/CSA-C22.2 No. 61010-1-04
IEC/EN 61010-1:2001 to 1000V CAT III, 600V CAT IV.
7
• Min/Max function records important values combinations to verify correct,
missing, and mis-wired connections.
The CP1 is extremely flexible and can
be reconfigured to test a variety of
Weight: 283 g cables by utilizing the included Cable
Dimensions: 207 x 75 x 34 mm View software. With the software, the
Max. wire diameter: 30 mm (600 MCM) adapter and cable definitions can be
Frequency range: 5–500 Hz defined manually, or with a learn mode to copy the connections from a known
AC current: Range: 40.00 A / 400.0 A
good cable. Fix it to the work bench or take it to the job; a simple adapter mates
Accuracy: 2% ± 5 digits (45 Hz to 65 Hz) the Cable Pro to the tested cable for a complete end-to-end test or connect one
2.5% ± 5 digits (65 Hz to 400 Hz) end to the Cable Pro and use the built-in logic probe to visually and audibly test
AC voltage: Range: 600.0 V individual connections.
Accuracy: 1.5% ± 5 digits
DC current: Range: 40.00 A / 400.0 A
Accuracy: 2% ± 5 digits
DC voltage: Range: 600.0 V Weight: 1 lb (shipping weight)
Accuracy: 1.0% ± 5 digits Dimensions: 6.6 × 4.4 × 1.9 in
Resistance: Range: 400.0 Ω / 4000 Ω / 40.00 kΩ Includes: Cable Pro tester, Cable View software, USB cable, logic
Accuracy: 1.0% ± 5 digits probe, and one year warranty
Contact temperature: 14°F to 752°F (-10°C to 400°C)
Safety rating: CAT III 600 V, CAT IV 300 V
Weight: 2 lb
Weight: 250 g
Dimensions: 8 x 4.64 x 1.65 in
Maximum conductor size: 19 mm diameter
Frequency range: 2–520 MHz
Cable length: 2m
Frequency resolution: 20 kHz
Frequency range: DC to 100 kHz (-0.5 dB)
Frequency accuracy: ± 50 kHz
Current range: Specified: 30 mA to 30 A DC, 30 mA to 20 A AC rms
Usable: 5 mA to 30 A DC, 30 mA to 20 A AC rms Humidity: 95% ± 5% max (non-condensing)
Crest factor: 1.4 in Temperature range: Operating: 0 to 50°C (32 to 122 °F)
Storage: -40 to +71 °C (-40 to +160 °F)
Accuracy: ±1% of reading ±2 mA (at 25°C)
• Fault location or DTF mode indicates VSWR or Return Loss levels at each TRACING KIT
point along the cable and antenna system length TRIPLETT
• Cable Loss function measures insertion loss of the cable system over a EDMO# 3399
given frequency range MFR# 3399
The Fox & Hound™ wire tracing kit consists
of a versatile Fox 2™ Tone Generator (Toner)
Weight: 1.98 lb
and a high-performance Hound 3™ Inductive
Amplifier (Probe). The Fox 2™ is a battery
Dimensions: 7.2 x 3.8 x 1.9 in
operated handheld multi-function Toner that
Frequency range: 300 kHz–200 MHz,1–4500 MHz, 20–6000 MHz generates multiple tones (Pulse or Warble),
DTF range: 0 to 5000 ft performs some basic telephone line tests
Temperature range: Operating: 14°F to 131°F (-10°C to +55°C) (loop mA, line polarity, and ringing voltage),
Storage: -40°F to 176°F (-40°C to +80°C) provides a visual and audible continuity
test, and integrates our own True Trace and
TripLatch tests while providing overload
protection up to 120 VAC. The Hound 3™
EDMO# MFR# DESCRIPTION is a battery operated handheld lightweight
SK-4000-TC SK-4000-TC Antenna and cable analyzer | 85–4000 MHz Probe, with a thumb wheel Sensitivity control and Signal Strength indicator
SK-4500-TC SK-4500-TC Antenna and cable analyzer | 1–4500 MHz
LED. It improves on previous designs with built-in LED headlights to illuminate
dark areas and reduce fluorescent light noise, a bandpass filter to suppress
unwanted frequencies, an earphone jack for noisy or quiet work areas, and an
easy access battery cover.
FOX 2
SITE HAWK AVIONICS TEST KIT • 3 methods of connectivity: RJ-11, RJ-45, or Alligator Clips
BIRD ELECTRONICS
EDMO# 7003A001-4 • High output, Warble/Pulse selectable Tracer tone
MFR# 7003A001-4 • TrueTrace cadence shift for definite ID of cable or par within cable
The Bird SiteHawk test kit quickly iden- • Red/Green telephone lines polarity LEDs
tifies and diagnoses antennas, cables, • Tone/Battery LED – indicates that Tracer tone is on and battery status
and connectors to avoid downtime and
the expense of trial-and-error compo- HOUND 3
nent swapping. Specifically designed
for testing aircraft RF systems, this kit • Adjustable sensitivity and loudness control
provides a pocket sized SiteHawk Cable • Bandpass Filter suppresses 60Hz and high frequency noise
and Antenna analyzer, wideband RF pow- • Identifies Fox 2’s tracer tone up to 12 inches away
er sensor and all necessary connector
adapters and cabling in a rugged case. • Headlights illuminate dark areas and reduce fluorescent light noise
Ideally suited for field technicians and • Built-in signal strength indicator
engineers who need to quickly diagnose • Earphone jack for use in quiet or noisy environments
and resolve problems with communications systems. The pocket sized
SiteHawk Antenna and Cable Analyzer operates from 1 MHz to 6,000 MHz and • Rugged, moisture resistant. Mylar cone speaker
features an intuitive interface readily accessible to even the first-time user.
• FDR (Frequency Domain Reflectometry) measurement
• Fault location or DTF mode indicates VSWR or Return Loss levels Weight: Fox 2: 7 oz
Hound 3: 8 oz
• Measures Match function & determines cable and antenna system faults Dimensions: Fox 2: 3.7 x 2.4 x 1.1 in
• Locate problem source with the Distance-to-Fault measurement Hound 3: 8.25 in (with metal probe)
9.25 (with conductive plastic probe) 1.87 diameter
• The Bird Power Sensor allows testing of various power measurements Overload protection: 120 VAC
• Cable Loss function measures insertion loss of the cable system over a
given frequency range
7
calibration seal sensitive, or large moving target areas. Without the
use of a probe, the IR thermometer measures surface
• Comes with splash- and dust-resistant case protected by an impact-absorb-
temperature and relays accurate data to the LCD dis-
ing holster and a three-year warranty
play. The contact and non-contact tester uses laser
• Powered by three, standard AA batteries sighting to confirm the intended target. For contact
• Includes an electronic offset function that compensates for thermocouple measurements the 384A uses K-type thermocouples
errors to maximize overall accuracy with sub-mini connector.
• Provides a user-friendly front panel that is easy to set up and operate • Easy-to-use single button operation
• Offers sleep mode to increase battery life; 1000-hour battery life typical • Last reading hold
• 9:1 distance to spot ratio
• 9-volt battery included
Weight: 400 g
Dimensions: 173 x 86 x 38 mm
Humidity: 0% to 90%; 0°C to 35°C Weight: 7 oz
0% to 70%; 0°C to 50°C
Dimensions: 6.1 x 5 x 1.3 in
Temperature range: Operating: -10°C to 50°C
Storage: -40°C to 60°C Distance to spot size: 9:1
Response time: 500 ms
Power source: 9V alkaline or NiCd battery
Accuracy: ±2% or ±2°C or ±3°C, which ever is greater
Temperature range: -18°C to 1,000°C (0°F to 1,832°F)
FLUKE 561 HVAC INFRARED & CONTACT
THERMOMETER
FLUKE
EDMO# FLUKE 561
MFR# FLUKE-561
The Fluke 561 IR contact thermometer
combines the temperature measurement
functions that industrial, electrical, and
HVAC/R professionals need in one tool.
EDMO: BIG SELECTION,
It is an IR thermometer for non-contact PRODUCTS YOU KNOW &
measurements, with K-type thermocou-
ple capability for contact temperature NAMES THAT YOU TRUST.
measurement. Use the 561 IR capabilities
to scan large areas or small objects
quickly and efficiently, without having As a class-leading aviation distributor, EDMO keeps
to shut down equipment. Measure hot, pace with the trends of the aerospace industry.
moving, electrically energized, and hard-
to-reach objects instantly. Check motors, We’re constantly updating our inventory with our
insulation, breakers, radiant heating, pipes, corroded connections, and wires. manufacturers’ latest products, so there’s a good
Plus, scan ducts, and other hard-to-reach objects from the floor and leave your
ladder in the truck. The handy flexible pipe probe (included) is used for taking chance we will have what you’re looking for.
super-heat or internal temperatures.
• Contact and non-contact IR thermometer Give us a call at 1.800.235.3300 or visit edmo.com
• Works with all standard mini-connector type K thermocouples
for parts and pricing.
• Provides single-point laser sighting
• Allows easy emissivity adjustment for measuring pipes
TL75 6733-2
Test leads are an integral part of the complete measurement system and
extend the capabilities of your digital multimeter. Fluke Test Lead Sets have
one pair of red and black comfort grip probes with flexible silicone or PVC
Ideal test lead wire for test leads, patch cords, and test fixtures. PVC, or sili- insulated, right-angle test leads. Safety ratings up to CAT III 1000 V.
cone test lead jacket material, combining high flexibility, even at low tempera-
tures, with resistance to burns and chemicals. The jacket features a durable
7
7
4MM SOCKET TO CONNECTOR LEADS 121348_B 1 OEM lantern prod, black
127080 127080 2 12 Yellow Aero lead 4 mm socket to male 121026/R 1 Sprung hook, red
127076 127076 2 12 Yellow Aero lead 4 mm socket to female 121026/B 1 Sprung hook, black
127081 127081 2 16 Blue Aero lead 4 mm socket to male
116340 1 BNC to coax patch cable, high flex
127077 127077 2 16 Blue Aero lead 4 mm socket to female
127082 127082 2 20 Red Aero lead 4 mm socket to male
127078 127078 2 20 Red Aero lead 4 mm socket to female
127079 127079 2 22 Green Aero lead 4 mm socket to female
127083 127083 2 22 Green Aero lead 4 mm socket to male
AVIONIC 30 ELECTRICAL TEST LEAD SET
CONNECTOR TO CONNECTOR LEADS
SILVERTRONIC LIMITED
- 127072 2 12 Yellow Aero lead male to male
EDMO# 905312
- 127068 2 12 Yellow Aero lead female to female MFR# 905312
- 127073 2 16 Blue Aero lead male to male
The avionic connector test lead service
- 127069 2 16 Blue Aero lead female to female kit features unique Avionic Test Leads
- 127074 2 20 Red Aero lead male to male that are designed to interconnect your
- 127070 2 20 Red Aero lead female to female Avionic connections and your 4mm test
- 127075 2 22 Green Aero lead male to male lead accessories used in your electrical
- 127071 2 22 Green Aero lead female to female service and maintenance tasks. The cable
insulation is single skinned silicone to
*Connectors with EDMO numbers are available individually
guarantee the highest flexibility. Cable
lead length is 50 mm.
MFR# QTY DESCRIPTION
119503QDF/B 1 Pouch black MFR# QTY PIN/ COLOR DESCRIPTION
SOCKET
127084 2 Aero lead GTA male to male black SIZE
127085 2 Aero lead GTA 4mm socket to male black 4MM SOCKET TO CONNECTOR LEADS
127086 2 Aero lead GTA female to female black 127076/50mm 1 12 Yellow Aero lead 4mm socket to female
127087 2 Aero lead GTA 4mm socket to female black 127080/50mm 1 12 Yellow Aero lead 4mm socket to male
119503QDF/W 1 Pouch white 127077/50mm 1 16 Blue Aero lead 4mm socket to female
119503QDF/G 1 Pouch green 127081/50mm 1 16 Blue Aero lead 4mm socket to male
119503QDF/R 1 Pouch red 127078/50mm 1 20 Red Aero lead 4mm socket to female
119503QDF/BL 1 Pouch blue 127082/50mm 1 20 Red Aero lead 4mm socket to male
119503QDF/Y 1 Pouch yellow 127079/50mm 1 22 Green Aero lead 4mm socket to female
825009 1 Volt stick 127083/50mm 1 22 Green Aero lead 4mm socket to male
116333 1 BNC male to double stacking banana plug
116332 1 BNC female to double stacking banana plug
116334 1 BNC male to double stacking binding post jacks
MFR# QTY DESCRIPTION
116335 1 BNC female to double stacking binding post jacks
126017/B 1 Small full safety insulated crocodile clip black
124044_B 1 4mm to 4mm safety plug adapter black
126017/R 1 Small full safety insulated crocodile clip red
124044_R 1 4mm to 4mm safety plug adapter red
A/123680/OF-OR/1.2/B 1 Cable assembly straight to right angle black
125099_R 1 4mm to 4mm coupler red
A/123680/OF-OR/1.2/R 1 Cable assembly straight to right angle red
125099_B 1 4mm to 4mm coupler black
119519 1 Pocket storage pouch
121039/R 1 Thin spike prod red
7
• Heavy duty heat sink
• Two user-defined Voltage and Current presets and one 13.8V/20A factory
• Chassis mount fuse
preset
• Three conductor power cord
• Automatic Constant Current crossover
• High RFI immunity and excellent EMI
EDMO# MFR# POWER SUPPLY SIZE
• Overload, over-temperature, and short circuit protection
VLS-10M VLS-10M 10 amp, 5-32V, 115 VAC 9 x 10.5 x 5 in
VLS-25M VLS-25M 25 amp, 5-32V, 115 VAC 13.75 x 11 x 6 in
VLS-35M VLS-35M 35 amp, 5-32V, 115 VAC 13.75 x 12.125 x 6 in Weight: 5.7 lb (2.6 kg)
Dimensions: 7.9 x 3.5 x 8.5 in (200 x 90 x 215 mm)
LS SERIES POWER SUPPLIES
NON-ADJUSTABLE, WITH METERS Frequency: 75–95 Hz
LS-35M LS-35M 35 amp, 28V, 115 VAC 13.75 x 12.125 x 6 in Input voltage: 100–120 VAC / 50/60 Hz
Rated load input current: 5.9A
SL SERIES POWER SUPPLIES – LOW PROFILE,
NON-ADJUSTABLE, WITHOUT METERS Fuses: 8A/250V time delay, glass 5x20mm
FOR USE WITH A110B, F11020, & F2020 Efficiency: 87% at optimum load
SL-11IF SL-11IF 11 amp, 13.8V, 115 VAC 7 x 9.75 x 5.25 in Cooling method: Thermo static controlled fan
SL-11IF220 SL-11IF/220 11 amp, 13.8V, 220 VAC 7 x 9.75 x 5.25 in Transient response time: 1.5 ms (50%–100% load)
Power factor control: >0.95% at optimum load
ACCESSORIES
Main power supply fluctuation: ±10% of the nominal voltage
GMC-3A GMC-3A 3A fuse | SL-11IF
Approvals: CE EMC: EN 55011, 55022
GMC-10A GMC-10A 10A Slo-Blo fuse | VLS-25M & VLS-50M LVD: 60950, 61010
Not finding what you need? Give us a call at 1.800.235.3300 or view our full inventory at edmo.com.
QTY TYPE QTY TYPE QTY TYPE 5736 TNC male 5756 UHF female
6 Universal 2 N female 2 TNC female 5737 SMA male 5753 Mini UHF male
2 BNC male 1 RCA male 2 UHF male 5738 “N” female 5757 Mini UHF female
2 BNC female 1 RCA female 2 UHF female 5739 BNC female 5754 RCA male
1 F male 1 SM male 1 Mini UHF male 5740 TNC female 5758 RCA female
1 F female 1 SMA female 1 Mini UHF female 5741 SMA female 5759 “F” male
2 N male 2 TNC male 5742 Coupler 5755 “F” female
5743 Double Banana Plug 5760 Signal Sampler
8
for engine starts, more energy for emergency and back-up power, ultra-fast
recharge and much longer life. • 46 amp-hour battery nominal at 23°C
• Advanced NanoPhosphate® lithium-ion cell chemistry • 40% lighter than lead-acid or nick-
el-cadmium alternatives
• Superior performance at extreme temperatures (-40°C to 70°C)
• Advanced NanoPhosphate® lithium-ion cell chemistry — 3x the energy per
• Overcharge, over-discharge, over-current, short circuit, over-temperature,
kilogram when compared to lead-acid and nickel-cadmium cells
under-temperature and charge current limiting protection
• 7 engine starts in 7 minutes
• Built-in Test (BIT) Indicator communicates real-time state-of-charge and
state-of-health • 15 minutes for complete recharge when the battery is fully discharged
• Anodized aluminum blue case • Superior performance at extremely high temperatures
• Charge voltage: 28 VDC nominal / Output voltage: 26.4 VDC nominal • Automatic internal heater
• Overcharge, over-discharge, over-current, short circuit, over-temperature,
TB20 BATTERY SPECS under-temperature and charge current limiting protection
Weight: 20 lb • Communicates ARINC 429 data to the cockpit
Dimensions: 9.1 x 8.6 x 8.8 in • 2-year maintenance interval provides 50–90% savings on maintenance costs
Capacity: 20 amp-hour battery at 23ºC, nominal • 8 years (average) service life
Output Current: 560A continuous, 960A max • FAA TSO certified
Configuration: 8P8S; 4 parallel x 8 in series x 2
Weight: 51.7 lb
TB30 BATTERY SPECS Dimensions: 10.87 x 10.48 x 10.14 in
Case: Anodized aluminum, blue
Weight: 28.5 lb
Capacity: 46 amp-hour @ 23°C, nominal
Dimensions: 12.5 x 8.6 x 8.8 in
Charge Voltage: 28 VDC, nominal
Capacity: 30 amp-hour battery @ 23ºC, nominal
Output Voltage: 26.4 VDC
Output Current: 840A continuous, 1440A max
Output Current: 750A continuous, 1500A max
Configuration: 12P8S; 4 parallel x 8 in series x 3
Technology: Advanced NanoPhosphate® lithium-ion chemistry
Configuration: 8S19P; 1 parallel x 8 in series x 19
Temperature range: Operating: -40°C to 70°C (-40°F to 158°F )
TB40 BATTERY SPECS Protection: Overcharge, over-discharge, over-current, short circuit,
over-temperature, under-temperature and charge
Weight: 38.5 lb current limiting
Dimensions: 9.1 x 14.7 x 8.8 in Certifications FAA TSO certified to C179a
Capacity: 40 amp-hour battery @ 23ºC, nominal ETSO certified to C179a
RTCA DO-311 qualified
Output Current: 1120A continuous, 1500A max RTCA DO-160G qualified
Configuration: 16P8S; 4 parallel x 8 in series x 4 UNDOT/IATA qualified
• Over current, over voltage, and over temperature protection 105 AMP
• Not intended for engine starting or battery charging 53105 53105 190-240 VAC, input
28.5 VDC / 105 amp, output
Weight: 7 lb
8
Dimensions: 11.75 x 5 x 4 in
AC input:
DC output:
100—220 V, 7A
28.5 VDC @ 25 Amp WITH 50 YEARS OF
EXPERIENCE IN THE INDUSTRY,
EDMO KNOWS QUALITY.
MODEL 53050 - 50 AMP Give us a call at 1.800.235.3300
Start Pac® Model 53050 portable power
supply provides 28.5 VDC of continuous
or visit edmo.com for parts and
power when plugged into a 110/220 pricing.
volt, single-phase AC power source. This
unit delivers a full 50 amp DC output for
powering up GPS systems and avionics
ENGAGED
for maintenance tasks.
Weight: 10 lb
Dimensions: 14 x 5.25 x 5.5 in
AC input: 190—240 V, universal
DC output: 28.5 VDC no duty cycle
Weight: 18 lb
Dimensions: 14.5 x 7 x 13.75 in
AC input: 190—240 V
DC output: 105 Amp ± 5%
8
Maximum Current: 720 Amps (10 sec limit)
• On-board display shows charge state and voltage Charge Cycles: >1,000 cycles
• 2.8 hours for complete recharge when the battery is fully discharged Engine Starts: 3,000—4,000 start cycles
• On-board diagnostics Starts per Charge: 3 to 4 starts
Time Before Discharge: 44 min (20amp load)
• Lightweight and powerful, lithium nano-phosphate cells with state-of-the-art
battery monitoring and protection circuitry Temperature range: Operating: -30°C to 60°C
ACCESSORIES
MODEL 1324-1QC PORTABLE
STARTING UNIT 2300QC-B RBB Replacement battery for 2300QC Earth Gear
QC TROLLEY TROLLEY Start Pac QC Trolley used for Start Pac models 1324-2QC,
START PAC 1628QC, 2300QC, LI2700QC, LI2800QC or the 6028QC. 10
EDMO# 1324-1QC inch Pneumatic tires w/ ball bearings.
MFR# 1324-1 QC
Start Pac® Model 1324-1QC is a 24 volt
unit that will start a turbine or piston
engine up to 500 horsepower. This unit
8
Weight: 77 lb
MODEL 2300QC PORTABLE Dimensions: 19.2 x 7.5 x 11.5 in
STARTING UNIT Capacity: 26 amp-hours @ 10 amp-hour rate
START PAC Voltage: 28.5 VDC
Start Pac® Model 2300QC is a 24 volt Amperage: 7A / 2300 engine starting
all-in-one portable Super Pac unit that Power source: 90–240 VAC at 50/60 Hz
includes built-in chargers, power plug
and cables. The 2300QC is intended for
starting aircraft engines — it will start
turbine and piston engines up to 1500
EDMO# MFR# DESCRIPTION
horse power and is equipped with uni-
versal chargers that accept 90-240 VAC 6028QC 6028 QC 6028QC portable starting unit / 28.5 V
at 50/60 Hz and have a recharge time of
6028QC-S 6028QC 6028QC portable starting unit / 28.5 V
less than 3.5 hours. SUPER PAC
• All in one portable, carry on Start Pac®
ACCESSORIES
• 2300 AMPS Peak Current complete with built in charger, power plug and
6028QC-B 6028QC-RBB Replacement battery for 6028QC
cables
QC TROLLEY TROLLEY Start Pac QC Trolley used for Start Pac models 1324-
• Designed specifically for engine starting 2QC, 1628QC, 2300QC, LI2700QC, LI2800QC or the
6028QC. 10 inch Pneumatic tires w/ ball bearings.
Weight: 69 lb
Dimensions: 19.2 x 7.5 x 11.5 in
8
• Environmentally friendly, low VOC durable powder coat finish
• Automatic soft engine starts from the battery bank
• Patent pending self-[ropelled feature for easier mobility
EDMO# MFR# DESCRIPTION • Tier IV EPA emissions compliant
LI2700QC LI2700QC 26 VDC / 9 amp output • Full application approval by Yanmar/Isuzu
ACCESSORIES • Built-in battery charger/warmer warmer for cold weather operation
LI2700QCB RBB Li2700QC Replacement battery pack/for LI2700QC, LI2700QC- • High visibility digital output display
RBB, LI2700QC Super Pac and LI2700QC Twin Pac
• Forced air-cooling
QC TROLLEY TROLLEY Start Pac QC Trolley used for Start Pac models 1324-
2QC, 1628QC, 2300QC, 53300, LI2700QC, LI2800QC or • Over-current, over-voltage, over temperature protection
the 6028QC. 10 inch Pneumatic tires w/ ball bearings.
Weight: 1073 lb
Dimensions: 56 x 46 x 60 in
LI2800QC LITHIUM ION GROUND POWER Capacity: 56 amp-hours for lead acid @ 10 amp-hour rate
UNIT 62 amp-hours for lithium @ 10 amp-hour rate
Voltage: 28.5 VDC
START PAC
Amperage: 300A / 2800 engine starting
Start Pac® Model LI2800QC portable
lithium ion starting unit provides a 28
VDC output for starting all electronical-
ly-started turbine engines. It features
dual, redundant chargers with a total of a
7 amperes output and a recharge time of
approximately four hours.
• Designed specifically for engine starting.
Weight: 46 lb
Dimensions: 19.2 x 7.5 x 9.75 in
Capacity: 28 amp-hours @ 10 amp-hour rate
Amperage: 7A / 2400 engine starting As a class-leading aviation distributor, EDMO keeps pace
with the trends of the aerospace industry. We’re constantly
updating our inventory with our manufacturers’ latest
EDMO# MFR# DESCRIPTION products, so there’s a good chance we will have what
LI2800QC LI2800QC 28 VDC / 7 amp
you’re looking for.
ACCESSORIES
LI2800QCB LI2800QC-BLUE Replacement battery pack for Start Pac models
LI2800QC and LI2800QC-RBB ground power units. Give us a call at 1.800.235.3300 or visit edmo.com for
QC TROLLEY TROLLEY Start Pac QC Trolley used for Start Pac models 1324- parts and pricing.
2QC, 1628QC, 2300QC, 53300, LI2700QC, LI2800QC or
the 6028QC. 10 inch Pneumatic tires w/ ball bearings.
8
DUAL VOLTAGE APU & CHARGER
DB ASSEMBLY, INC
The BA-14/2850 Aircraft Ramp Power
INTEGRAL
Supply and Battery Charger is a multi-pur-
pose aircraft flight line service and
maintenance tool. The unit has a filtered
14 & 28 volt DC power supply with up to
50 amperes capability for tests of aircraft
electrical systems and a secondary mode
for recharging run-down batteries. The
BA-14/2850 plugs directly into the aircraft
APU connector and is tied to the electrical
system when the master switch is acti-
vated. Selection of output voltage is by a
front panel switch which is protected by a
switch guard. Closing the guard forces the
switch to the 14 volt position.
• Fully automatic charging process
• LED indicator
• On/Off switch also resets the unit
• Front panel output voltage selection
• Guard protected switch
• Closed guard forces switch to the 14 volt position
• AC circuit breaker
• 8 foot DC cable
• Ferro-resonant regulated supply
Weight: 46 lb
Output amperage/voltage: 14/28 VDC @ 50A
Inverters.................................................................................................................... 224
Converters................................................................................................................. 229
Emergency Power Supplies......................................................................................... 234
INVERTERS • Input transient, overload, and short-circuit protection for up to 150% of rated
load
• Optional remote on/off
TI2000 SERIES DC-TO-AC INVERTER
TRUE BLUE POWER
EDMO# 6432000-1 Weight: 7.3 lb (3.31 kg)
MFR# 6432000-1 Dimensions: 12 x 6.32 x 3.46 in
The TI2000 DC-to-AC Inverter provides Case: Anodized aluminum extrusion, blue
2,000 watts of wall outlet power to Input voltage: 20–36 VDC
cabin and galley accessories including Input current: 60A @ 28 VDC input
entertainment systems, personal elec- Output voltage: TI1200: 115 VAC ± 3%
tronic devices, microwave ovens, and TI1202: 230 VAC ± 3%
coffee makers. This small and light- TI1204: 115 VAC ± 3%
weight unit features input transient, Output frequency: TI1200: 60 Hz ± 0.1%
overload and short-circuit protection up TI1202: 50 Hz ± 0.1%
TI1204: 400 Hz ± 0.1%
to 150% of the rated load.
Output power: 1200 watts
• Supplies 2,000 watts of wall outlet power
Output waveform: Single phase, true sine wave, < 3% THD
• Ideal for emergency medical equipment, special mission and VIP cabin Altitude: 55,000 ft
configurations Humidity: Tested to greater than 95% for 10 days
• 93% efficiency rating Temperature cycle of 75°F to 160°F
• Input transient, overload and short-circuit protection — up to 150% of rated Temperature range: Operating: -55°C to 70°C (-65°F to 160°F)
load without damage Integral cooling: Dual, electronically-controlled brushless fans
9
9
with a fanless design, the TI250 saves
Output voltage: 26 ±1 VAC, 400 Hz ±0.5%, single phase
energy, operates cooler and weighs as
Output power: 10 VA | Pure sine wave, < 3% distortion
little as 2.2 pounds. The TI250 utilizes the
same connector and footprint as legacy Altitude: -1,000 to 50,000 ft
designs and includes overload, short-cir- Humidity: 0 to 95% @ 25°C
cuit, and ground fault protection. Temperature range: Operating: -55°C to 70°C (-65°F to 160°F)
• Supplies 250 watts of power to multiple cabin accessories, such as laptops, Vibrations: 0.02 in. dbl. ampl., 3g @ 5 to 55 Hz
tablets, and cell phones Connector: Terminal block
• 87% - 90% efficient Mounting: Base mount
RF Emissions: RTCA DO-160F, Section 21, Category M
• Input transient, overload, short circuit protection up to 150% of rated load
without damage Certification: FAA PMA approved
9
Amplitude distortion: Less than 7% KGS ELECTRONICS INC
Waveform & phase: Sine wave / single phase
EDMO# SD35
MFR# SD35
Short circuit: Will withstand 1 minute
Altitude: 55,000 ft The SD35 electroluminescent (EL) pulse
width-modulated DC to AC converter
Temperature range: Operating: -55°C to 71°C (-65°F to 160°F)
provides regulated 0 to 115 VAC power up
Certification: FAA TSO-C73 to 3.04 amperes for EL panel lighting. The
SD35 powers approximately 2000-2600
in2 area of an EL panel.
• Output voltage is varied by a slider
voltage 0-5 VDC applied at pin F from a
SEA150 THREE PHASE STATIC INVERTER remote control potentiometer 5KΩ 1/2
KGS ELECTRONICS INC watt to ground or directly from a 0-5
EDMO# SEA150 VDC source
MFR# SEA150 • Internal trim pot provided to adjust the
The SEA150 provides 1500 VA, 3-phase output voltage ±10% at its full clockwise position of the external pot
power using state-of-the-art, solid state • Circuit protection: low input voltage shutdown, soft start, high input voltage
circuitry to invert a 28 VDC input to a shutdown, output over voltage limit and output short circuit current limit
115/200 VAC, 400 Hz, 3-phase sine
wave output. The SEA150 is designed to
power airborne and ground instruments,
compasses, gyros, radar, and navigation Weight: 5.3 lb
equipment. Dimensions: 3.45 x 8.25 x 3.45 in
• Crystal-controlled oscillator for output Input voltage: 18 VDC nominal, 24–32 VDC
frequency stability Input current: 6.7A typical at 350 VA El load @ 28V
2.8A maximum @ no load
• Pulse width-modulated square to sine
wave power conversion scheme Output voltage: 0–115 VAC regulated
Output current: 0–3.04A continuous
• Circuit protection: overvoltage, low voltage shutdown, short circuit, and
Power: 350 VA maximum for EL panel
temperature protection
Power factor: 0 to 0.2 leading (capacitive)
• FAA TSO-C73 compliant
Frequency: 400 Hz ± 2%
Distortion: 5% typ at 28 VDC for 350 VA, -0.2pf load
Regulation: 5% for load, 3% for line and 3% for temperature
Weight: 15.7 lb Control: Output voltage 0-115 VAC is controlled by an external
Dimensions: 6.51 x 6.23 x 14 in 5K potentiometer or a 0-5 VDC source applied at pin F
Current: 1.5 ADC nominal at no load Overload capacity: Deliver 150% output power for 5 min.
63 ADC at 1.5 KVA at 28 VDC Soft start: Minimum soft start delay of 100 mSec at full load is
Output: SEA150: 115/200 VAC and 26 VAC provided during an application of step input.
SEA150C: 115/200 VAC Altitude: 55,000 ft
Power: 1500 VA (500 VA per phase) Temperature range: Operating: -55°C to 71°C (-65°F to 160°F)
Frequency: 400 Hz ± 0.4 Hz Connector: Mates with MS3106A18-9S
Waveform & phase: Sine wave / three phase
Harmonic Distortion: 2.5% nominal
Weight: 5.3 lb
Dimensions: 4.6 x 4.42 x 6.46 in
Input voltage: 115 VAC @ 400 Hz nominal (105–125 VAC)
MPS28-300 DC-TO-AC MINI PORTABLE
9
CONVERTERS
Regulation: 1% load, 2% temperature
Altitude: 55,000 ft
TC280 AC-TO-DC CONVERTER Temperature range: Operating: -55°C to 70°C (-67°F to 158°F)
TRUE BLUE POWER Mating Connector: P/N 9018654 (6430234-1)
EDMO# TC280 P/N 9018655 (6430234-2)
MFR# 6430280-1 Certification: FAA TSO C71 certified
RTCA DO-160G qualified
The TC280 AC-to-DC Converter produces
280 watts of power from an aircraft’s 115
VAC input. This unit is engineered to run
cooler than similar units and uses a fan-
less design to reduce weight and require EDMO# MFR# FEATURE
less energy. The TC280 is capable of 6430234-1 6430234-1 -
powering electronic equipment throughout 6430234-2 6430234-2 Remote on/off (included)
the aircraft including in-seat, cabin and
cockpit power applications.
• Supplies 280 watts of 28-volt power
• Input transient, overload and short circuit protection
• Over 88% efficient TC240 SERIES DC-TO-DC CONVERTERS
• Remote On/Off TRUE BLUE POWER
The TC240 DC-to-DC Converter produces
240 watts of power from the aircraft’s
9
28-volt VDC input. It features a variable
Weight: 2.0 lb output voltage ranging from 5 VDC – 18
Dimensions: 6.04 x 5.94 x 2.02 lb VDC for powering electronic equipment
Case: Anodized aluminum extrusion, blue throughout the aircraft — including in-seat,
Input voltage: 115 ± 10 VAC, 350–800 Hz cabin and cockpit power applications. The
Input current: 2.8A nominal TC240 DC power converter is suitable for
nearly any common general, business, or
Output voltage: 28 VDC ± 3%
commercial aviation applications
Output power: 280 watts
• Supplies 240 watts of DC power
Regulation: 2% load, 2% temperature
Altitude: 55,000 ft • Adjustable 5 VDC - 18 VDC output
Temperature range: Operating: -55°C to 71°C (-65°F to 160°F) • Input transient, overload and short circuit protection, reverse polarity protec-
Mating Connector: MS3106A-18-9S tion, and temperature monitoring
Certification: FAA TSO-C71 certified • 95% efficient
RTCA DO-160G qualified
• Mounts in the floor, cabin wall, or outside the pressure vessel
Weight: 0.7 lb
TC230 SERIES DC-TO DC CONVERTER Dimensions: 3.375 x 2.75 x 1.29 in
TRUE BLUE POWER Case: Anodized aluminum, blue
Input voltage: 22–32 VDC
The TC230 DC-to-DC Converter allows an
aircraft with a 14-volt electrical system to Input current: 10.0A nominal
power 28-volt avionics, instruments, and Output voltage: 5–18 VDC adjustable
accessories, including radios, GPS and Output power: 240 watts
electronic equipment. The TC230 step-up Regulation: 1% load, 2% temperature
converter provides 230 watts of power in Altitude: 55,000 ft
a small and lightweight package. Temperature range: Operating: -55°C to 70°C (-67°F to 158°F)
• Supplies 230 watts of DC power Mating connector: P/N 9018654 (included)
• 28 VDC output Certification: FAA TSO C71 certified
RTCA DO-160G qualified
• Input transient, overload and short
circuit protection, temperature monitoring, reverse polarity
• 90% efficient
EDMO# MFR# FEATURE
6430240-1 6430240-1 -
Weight: 0.70 lb 6430240-2 6430240-2 Remote on/off (included)
Dimensions: 3.375 x 2.75 x 1.29 in
Case: Anodized aluminum, blue
Input voltage: 10–18 VDC
Input current: 18.0A nominal
Output voltage: 28 VDC
Output power: 130 watts
Weight: 0.65 lb
LT SERIES DC-TO-DC POWER CONVERTERS
Dimensions: 3.375 x 2.75 x 1.29 in KGS ELECTRONICS INC
Case: Anodized aluminum, blue The LT Series pulse width-modulated
Input voltage: 24–32 VDC DC-to-DC power converters provide
regulated DC power from an unreg-
9
9
LT-52A: KPT-06A-14-5S LT-50: MS3126F14-5S
LT-53: KPT-06A-14-5S LT-55A/B/C: MS3106A16-1S
LT-45D: MS3106A14S-5S LT-71: MS3106A14S-5S-X RG56 DC-TO-DC POWER CONVERTER
LT-46C: MS3126W14-5S LT-100: MS3106A14S-5S KGS ELECTRONICS INC
LT-46D: MS3106E14S-5S LT-253-400: MS3106A14S-6S
LT-48A: MS3126E14-5S LT-353: MS3106Al6S-lS (J1); MS3106A14S-6S (J2) EDMO# RG56
LT-48B: MS27473T-10B-5S LT-103: MS3106A14S-5S MFR# RG56
LT-48D: MS3126E14-5S LT-3100: MS3106Al6S-lS (J1); MS3106A14S-6S (J2)
LT-48E: MS3126E14-5S LT-3103: MS3106Al6S-lS (J1); MS3106A14S-6S (J2) The RG56 high powered, DC-to-DC con-
verter provides 560 watts of regulated
RECEPTACLES 14 VDC voltage output from a 28 VDC
input. The 14 VDC output is “buck con-
LT-52A: PT-02E-14-5P verted”, therefore the input and output
LT-48E: KPT02A14-5P
LT-53: PT-02E-14-5P LT-71: MS3102A14S-5P-X voltages are not isolated from each
LT-45D: MS3102A14S-5P other. Current Mode Switching topology
LT-100: MS3102A14S-5P
LT-46C: KPT02A14-5P
LT-46D: MS3102A14S-5P LT-353: MS3102Al6S-lP (J1); MS3102Al4S-6P (J2) combined with Surface Mount technolo-
LT-103: MS3102A14S-5P gy (SMT) realizes the power conversion,
LT-48A: KPT02A14-5P LT-3100: MS3102Al6S-lP (J1); MS3102Al4S-6P (J2)
LT-48B: JT02A-10-5P- (O14) while a synchronous PWM controller
LT-3103: MS3102Al6S-lP (J1); MS3102Al4S-6P (J2)
LT-48D: KPT02A14-5P provides voltage regulation and overload
current limit.
• Circuit protection includes: output short circuit limit and shuts down with the
voltage feedback loop is opened.
• FAA TSO-C71 compliant
RB125 DC-TO-DC POWER CONVERTER
KGS ELECTRONICS INC
EDMO# RB125 Weight: 2.5 lb
MFR# RB125 Dimensions: 4.3 x 6.88 x 2.75 in
The RB125 pulse width-modulated Input voltage: 28 VDC nominal, 22–32 VDC
DC-to-DC converter provides up to 5 Input current: 23A @ 28 VDC input & at full load
amperes of regulated 28 volt DC power 0.5A @ maximum at no load
from a 12 volt battery source. The RB Output voltage: 14 VDC, regulated
series is designed to be used in an Output current: 0-40A, continuous
aircraft with a 12 volt electrical system
Regulation: 5% for load, .5% for line and 3% for temperature
to power 28 volt equipment during peri-
ods when the battery is not charged. Overload: Deliver 110% output power for 2 hours
Efficiency: 90%
• State of the art design for regulation
and positive logic for output over- Altitude: 55,000 ft
voltage protection Temperature range: Operating: -55°C to 71°C (-67°F to 158°F)
Cooling: Forced air cooling (internal fan) and thermal conduction
• Output is adjustable to 28 ± 2 VDC via an internal trim pot through bottom plate
• Designed to meet various applicable portions MIL-STD 704 notice 3, MIL- Finish: Gold iridite per MIL-C-5541 Class 1A
STD-202 and MIL-T-5422F class 1A Certification: FAA TSO-C71
Weight: 1.5 lb
9
Output current: 0–10A continuous • Internal trim pot adjusts the output
15A for 5 minutes
voltage within ±10% from full clockwise
Power: 280 watts from 12-28 VDC input position
420 watts or 5 minutes at 14 VDC input
Regulation: 1% for line, 1% for load and 1% for temperature • Circuit protection includes: low voltage shutdown, soft start, high input
Efficiency: 92% shutdown, output overvoltage limit, and output short circuit current limit
Altitude: 55,000 ft
Temperature range: Operating: -55°C to 71°C (-67°F to 158°F)
Cooling: Convection and thermal conduction through the bottom Weight: 5.1 lb
plate (No internal fan) Dimensions: 3.9 x 4.38 x 8.5 in
Finish: Gold iridite per MIL-C-5541 Class 1A Input voltage: 105–125 VAC
Certification: FAA TSO-C71 Input current: 0.73A at 150 VA EL load at 115V, typical
Output voltage: 0–115 VAC, 400 Hz
Output current: 0–1.3A, continuous
Frequency: 400 Hz ± 2%
Power: 150 VA
A4812 & N2412 SERIES DC-TO-DC Power factor: 0 to -0.2 leading (capacitive)
CONVERTERS Distortion: 3% at 75VA & 7% at 150VA typical
ASTRON CORPORATION Regulation: 7% for load, 3% for line and 3% for temperature
The N2412 and A4812 Series DC-to-DC Overload: 150% output power for 5 min.
power converters are designed to for Isolation The output is isolated from the input
use with FM transceivers and other Control: Output 0-115 VAC is controlled by a 0-5 VDC voltage
applications requiring a 12 volt power from the slider of an external 10KΩ pot or directly from a
source converter from a 24 volt battery. 0-5 VDC voltage source
• Overvoltage, overcurrent, and short Soft start: Minimum soft start delay of 100 mSec at full load is
provided during an application of step input voltage to
Circuit Protection reduce output in rush current to the EL panel.
• Terminal Block Connectors Altitude: 55,000 ft
2412-12
• Converter maybe turn on and off with the ignition switch Temperature range: Operating: -55°C to 71°C (-67°F to 158°F)
Connector: Mates with MS3106A16S-1 S
Finish: Gold iridite per MIL-C-5541 Class 1A
HS200: 17.7 lb
Dimensions: HB120: 12 x 11.25 x 10.6 in
HS120: 12 x 11.25 x 10.6 in
HS200: 6.51 x 14 x 6.23 in
Input voltage: 115/200 VAC ± 10 VAC, 3 phase
Input frequency: 400 Hz ± 100 Hz, (HS/HB120)
EMERGENCY POWER
400 Hz ± 200 Hz, (HS200)
Waveform & phase: Sine wave / single phase
Harmonic distortion:
Power factor:
0.5%
+0.8 to -0.8 SUPPLIES
Regulation: 1% Line, 1% Load, 2.5% Temperature
Overload: 110% of the rated output power for a period of 2 hours;
150% of the rated output current for a period of 5 TS835 SERIES EMERGENCY POWER SUPPLY
minutes (minimum). When the operating temp. >55°C,
the overload setting is internally limited to 135% ± 10% TRUE BLUE POWER
of the rated output power The TS835 Series Emergency Power Sup-
Efficiency: 87% plies feature advanced Nanophosphate®
Response time: 300 uSec (no load to full load) lithium-ion cell chemistry that offers
Remote on/off: Yes distinct advantages over older, lead-acid
Altitude: 55,000 ft design – including a 62% weight savings,
reduced maintenance costs, and improved
Temperature range: Operating: -55°C to 71°C (-65°F to 160°F)
10-year life expectancy.
Cooling: Thermostatically controlled, brushless fan
• Automatically provides 24.5 VDC power
for critical or standby equipment in the
event of aircraft power failure
EDMO# MFR# OUTPUT CURRENT FREQUENCY • 4.5 amp-hour Nanophosphate® lithium-ion battery
VOLTAGE • Utilizes advanced Nanophosphate® lithium-ion technology — an energy stor-
1000 VA age solution with superior safety and abuse tolerance compared to metal
oxide lithium-ion chemistries
HS100 HS100 115 Vrms 8.7A rms 60 Hz
• Maintains full charge by recharging during normal flight operations
1200 VA
• Lightweight — 63% lighter than legacy lead-acid designs
HB120 HB120 230 Vrms 5.2A rms 50 Hz
• Direct replacement for L-3 Avionics/JET PS-835 or PS-855 (same rack mount
HS120 HS120 115 Vrms 10.4A rms 60 Hz
and connector)
HS120A HS120(A) 115 Vrms 10.4 A rms 60 Hz
• Two-year maintenance schedule
2000 VA
• Part 23 AML STC certified
HS200 HS200 115 VAC - 50 Hz
Weight: 4.8 lb
Dimensions: 3.1 x 12.7 x 2.4 in
Case: Anodized aluminum, blue
Input voltage: 24–32 VDC, 7.0 amps maximum
Capacity: 4.5 amp-hour, nominal
9
• Can float charge batteries indefinitely to maintain an always-ready state
Weight:
Dimensions:
8 lb
7.75 x 10.63 x 3.58 in EDMO: BIG SELECTION,
Input voltage: 115/200 VAC ± 10 VAC, 3 phase PRODUCTS YOU KNOW &
NAMES THAT YOU TRUST.
Input current: 4.2A per phase
Input frequency: 400 Hz ± 100 Hz
Output voltage: 28 VDC ± 0.2 VDC
Output current: 42A DC
Output power: 1200 watts, maximum
As a class-leading aviation distributor, EDMO keeps
Ripple: 200 mVpp nominal @ 1200 watt pace with the trends of the aerospace industry.
Regulation: Line; 1.5% typical, Load; 1.5% typical We’re constantly updating our inventory with our
Overload: 120% output for at least 5 minutes
manufacturers’ latest products, so there’s a good
Efficiency: 80% typical at full load
Response time: No load to full load: 2 mSec
chance we will have what you’re looking for.
Full load to no load: 10 mSec
Overshoot: Full load to no load: +2 Vpk
Undershoot: No load to full load: -10 Vpk
Give us a call at 1.800.235.3300 or visit edmo.com
Altitude: 55,000 ft for parts and pricing.
Temperature range: Operating: -55°C to 71°C (-65°F to 160°F)
Cooling: Thermostatically controlled brushless fan
10
buzzer, and mounting tray Certification: Cospas-Sarsat, FAA TSO
8223 8223 ELT 3000 Rod Pack | Includes: 110-338 rod antenna,
remote switch, install hardware, buzzer, and
connectors
8224 8224 ELT 3000 Blade Pack | Includes: 110-340 blade
antenna, remote switch, install hardware, buzzer, and EDMO# MFR# DESCRIPTION
connectors
8201 8201 ELT 1000 & 6 year battery only
HELICOPTER
8202 8202 ELT 1000 Base Pack | Includes: installation hardware, audio
8231 8231 ELT 3000 HM & 6 year battery only buzzer, and mounting tray
8232 8232 ELT 3000 HM Base Pack | Includes: install hardware,
buzzer, and mounting bracket 8203 8203 ELT 1000 Whip Pack | Includes: 110-773 whip antenna,
remote switch, install kit, buzzer, and connectors
8233 8233 ELT 3000 HM Rod Pack | Includes: 110-338 rod
antenna, remote switch, install hardware, buzzer, and 8204 8204 ELT 1000 Rod Pack | Includes: 110-338 rod antenna, remote
connectors switch, install kit, buzzer, and connectors
ACCESSORIES 8205 8205 ELT 1000 ACE Base Pack | Includes: 110-773 whip antenna,
remote switch, 1.25 ft cable, install kit, buzzer, and
8315 8315 Replacement 6-year lithium battery connectors
8316 8316 Mounting tray
8206 8206 ELT 1000 ACE Base Pack | Includes: 110-773 whip antenna,
8318 8318 ELT 3000 retrofit mounting tray remote switch, 6 ft cable, install kit, buzzer, and connectors
8320 8320 Blank programming adapter 8207 8207 ELT 1000 Rod Pack | Includes: 8603 rod antenna, remote
A2-07-0270 A2-07-0270 ELT Programming cable switch, install kit, buzzer and connectors
ACCESSORIES
8302 8302 Replacement 6-year lithium battery
8303 8303 Mounting strap and tray
ELT 1000 8304 8304 Remote switch
ACR/ARTEX 8306 8306 ELT 1000 retrofit kit | Includes: remote switch, install kit,
interface module, and extender
The ELT 1000 is an excellent, cost-effec-
tive option for upgrading standard 121.5 8603 8603 ELT 1000 rod antenna
MHz transmitters, which are no longer 611-0112 611-0112 ELT programming cable
monitored by the Cospat-Sarsat System.
The ELT 1000 is a single output ELT that
transmits on both 406 MHz and 121.5
MHz using the same RF output and one
coax cable. The 406 signal alone produc-
es an accurate position within 1.86 miles
and when paired with aircraft’s navigation
WITH 50 YEARS OF EXPERIENCE IN
system via the built-in GPS interface, 8201 THE INDUSTRY, EDMO KNOWS QUALITY.
the ELT’s accuracy is further improved to
about 110 yards. The GPS interface does not require aircraft power to operate Give us a call at 1.800.235.3300 or visit edmo.com for
the remote switch only requires two wires, which reduces installation costs and parts and pricing.
labor.
• Automatic fixed emergency locator transmitter
• Single antenna output for 406 MHz and 121.5 MHz makes it easier for rescuers to easily
• Provides position accuracy to within 100 meters through a built-in GPS identify victims while speeding up search
interface (NMEA 0183 or RS-232) times. The C406-1 is a single output ELT 453-5002
and uses the same RF output connector
• ELT and installation can be tested using satellite-based online confirmation for transmitting all three frequencies. As such it requires only one coax cable
test via Artex’s proprietary satellite testing service at 406Test.com to connect the Artex single input antennas. Latitude and Longitude can also be
• Includes a stainless steel mounting bracket with multiple hole pattern con- transmitted as part of the 406 MHz message when the C406-1 is connected to
figuration for retrofitting legacy Artex ELTs as well as ACK, or Kannad ELTs the optional Artex ELT/NAV interface.
• 2-wire interface does not require aircraft power • Operates on 121.5, 243, and 406 MHz
• Compatible with the ELT to navigation interface
• Single-directional and multi-directional G-switch versions are available for
Weight: 2 lb, with tray fixed wing and heli aircraft, respectively
Dimensions: 6.4 x 2.96 x 3.78 in (with mounting hardware) • Equipped with a Lithium-Ion battery with a five-year live
Operating frequencies: 406.040 MHz (±1kHz) | 16K0G1D
121.5 MHz (±6.075 kHz) | 3K20A3X
Output power: 406 MHz: 5 for 24 hr @ -20°C to 55°C
121.5 MHz: 50mW for 50 hr @ -20°C to 55°C Weight: 3 lb 5.8 oz (transmitter maximum)
Activation: Automatic via G-switch by 4.5 ft/sec (2.3 G) or manual Dimensions: 11.7 x 3.9 x 3.82 in (with mounting hardware)
activation Operating frequencies: 406, 121.5/243 MHz ± 0.005% (A3X)
Self test: G-Switch enabled, 406 MHz and 121.5 MHz power, NAV Output power: 406 MHz:
system, low battery 5 W ± 2 dB (520 ms / 50 sec) for 24 hours @ -20°C
Battery: 6-year Lithium (LiMnO2)
Remote switch: On/Arm/Test 121.5/243.0 MHz:
100 mW minimum (20 dBm) for 50 hours @ -20°C
Temperature range: Operating: -20°C to 55°C
Storage: -55°C to 85°C Activation: Automatically by 4.5 ft/sec (2.3 G) primary G-switch or
manual
GPS interface: Built-in GPS navigation (NMEA 0183 or RS-232)
Self test: G-switch enabled, 406 MHz power, antenna/ coax
Connector: BNC female connection, position data present, low battery
Certification: Cospas-Sarsat, FAA TSO, Transport & Industry Canada Battery: 5-year lithium (LiMnO2, solid cathode)
Remote switch: On/Arm
Temperature range: Operating: -20°C to 55°C
Storage: -55°C to 85°C
EDMO# MFR# DESCRIPTION Connecter: BNC Female (121.5/243.0/406 MHz)
8100 8100 ELT 345 & 6 year battery only Certification: TSO-C126, ETSO 2C126, Cospat/Sarsat approved,
Transport & Industry Canada approved
8102 8102 ELT 345 Base Pack | Includes: 8324 whip antenna, remote
switch, battery, install hardware with buzzer and connector
8107 8107 ELT 345 Compact Kit | Includes: 15-inch black whip antenna,
standard 2-wire remote switch, buzzer, mounting tray, 6 ft
BNC to BNC coax cable, and install kit EDMO# MFR# INCLUDES
8108 8108 ELT 345 Slim Kit | Includes: 15-inch black whip antenna,
slim-line 2-wire remote switch, buzzer, mounting tray, 6 ft 453-5002 453-5002-[366] C406-1 & 5-year battery only
BNC to BNC coax cable, and install kit 455-5015 455-5015 C406-1 System | Includes: 110-340 blade antenna, NAV
remote switch, mounting tray, buzzer and install kit
10
emergency frequencies (121.5, 243, and
406 MHz) after a crash has occurred. The
C406-2 transmits a standard swept tone
on 121.5 and 243 MHz and also an encod-
ed digital to the Cospas-Sarsat satellite
system at 406 MHz, which makes it easier C406-N SERIES ELT
for rescuers to quickly identify victims ACR/ARTEX
while reducing search times. The C406-2
differs from the C406-1 in that it is a dual The Artex C406-N series ELTs transmits all
453-5000 three emergency frequencies on a single
output device and uses NC(f) connector
output for 121.5 and 243 MHz while the 406 MHz output is transmitted through output and can receive latitude and longi-
a TPS(f) connector. Latitude and longitude data can also be transmitted as part tude data directly from the aircraft navi-
of the 406 MHz message when the C406-2 is interface with the optional Artex gation system. In the event of a crash, the
ELT/NAV interface. Artex C406-N ELT automatically activates
and transmits an emergency message
• Operated on 121.5, 243, and 406 MHz frequencies with worldwide coverage on the standard swept tone on 121.5 and
• Compatible with the ELT to navigation interface 243 MHz and also transmits an encoded
• Single-directional and multi-directional G-switch versions are available for digital message to the Cospat-Sarsat sat-
fixed-wing and heli aircraft, respectively ellite system on 406 MHz, which makes
it easier for rescuers to quickly identify 453-5060
• Equipped with a Lithium-Ion battery with a five-year life victims while reducing search times. Us-
ing an option programming adapter, the ELT can also be programmed with the
aircraft’s 24-bit address and other custom programming for fleet operators.
Weight: 3 lb 5.8 oz (transmitter maximum) • Operates on 121.5, 243, and 406 MHz frequencies with worldwide coverage
7 oz (mounting tray)
• An optional programming adapter makes it possible to program the ELT with
Dimensions: 11.7 x 3.9 x 3.82 in (with mounting hardware) the aircraft’s 24-bit address for fleet operators
Operating frequencies: 406 MHz, 121.5/243 MHz ± 0.005% (A3X)
• Single-directional and multi-directional G-switch versions are available for fix
Output power: 406 MHz: wing and heli aircraft, respectively
5 W ± 2 dB (520 ms / 50 sec) for 24 hours @ -20°C
• Equipped with a Lithium-ion battery with a five-year life
121.5/243.0 MHz:
100 mW min (+20 dBm) for 50 hours @ -20°C
Activation: Automatic by 4.5 feet per second (2.3 G) Primary
G-Switch or Manual Activation Weight: 3 lb 5.8 oz (transmitter maximum)
Self test: G-Switch Enabled, 406 MHz Power, Antenna/Coax 7 oz (mounting tray)
Connection, Position Data Present, Low Battery Dimensions: 11.7 x 3.9 x 3.82 in (with mounting hardware)
Battery: 5-year lithium (LiMnO2, solid cathode) Operating frequencies: 406, 121.5/243 MHz ± 0.005% (A3X)
Remote switch: On/Arm Output power: 406 MHz:
Temperature range: Operating: -20°C to 55°C 5 W (520 ms / 50 sec) for 24 hours @ -20°C to 55°C
Storage: -55°C to 85°C 121.5/243.0 MHz:
Connector: BNC Female (121.5/243.0 MHz), TPS Female (406 MHz) 100 mW min (+20 dBm) for 50 hours @ -20°C to 55°C
Certification: TSO-C126, ETSO-2C126, Cospas/Sarsat approved, Activation: Automatic by 4.5 ft/sec (2.3 G) Primary G-Switch or
Transport & Industry Canada approved Manual Activation
Self test: C-switch enabled, 406 MHz power, antenna/coax
connection, position data present, low battery
*continued on next page
Battery: 5-year lithium-ion battery (LiMnO2, solid cathode) Output power: 406 MHz:
Temperature range: Operating: -20°C to 55°C 5 W ± 2 dB (520 ms/50 sec) for 24 hours @ -20°C
Storage: -55°C to 85°C
121.5/243.0 MHz:
Certification: TSO-C126, ETSO-2C126, Cospas/Sarsat approved, 100 mW minimum (+20 dBm) for 50 hours @ -20°C
Transport & Industry Canada approved
Activation: Automatic by 4.5 ft/sec (2.3 G) Primary G-Switch or
manual activation
Self test: G-Switch enabled, 406 MHz power, antenna/coax
connection, position data present, and low battery
EDMO# MFR# INCLUDES Battery: 5-year, Lithium-Ion (LiMn02, solid cathode)
453-5060 453-5060 C406-N & 5-year battery only Remote switch: On/Arm
455-5060 455-5060 C406-N Base Pack | Includes: install kit and mounting tray Temperature range: Operating: -20C to 55°C
Storage: -55°C to 85°C
455-5063 455-5063 C406-N System | Includes: 110-338 rod antenna, NAV remote
switch, mounting tray, top cover, buzzer, and install kit Connector: BNC Female (121.5/243 MHz), TPS Female (406 MHz)
C406-N (FOR HELICOPTER WITH MULTI-AXIS G-SWITCH) Certification: TSO-C126, ETSO-2C126, Cospas/Sarsat approved,
Transport & Industry Canada approved
453-5061 453-5061 C406-N HM & 5-year battery only
455-5061 455-5061 C406-N HM System | Includes: NAV interface, install kit,
mounting tray, buzzer, cable assemblies, install/operation
manuals
455-5064 455-5064 C406-N HM System | Includes: 110-338 rod antenna, NAV EDMO# MFR# INCLUDES
remote switch, top cover, mounting tray, buzzer, cable 453-5012 453-5012 G406-4 & 5-year battery only
assemblies, install kit, and install/operation manuals
455-5044 455-5044 G406-4 System | Includes: 110-329 whip antenna, remote
ACCESSORIES switch, mounting tray, buzzer, 5-year battery, coax cable,
452-0133 452-0133 Replacement 5-year lithium battery install kit, and install/operation manual
452-3052 452-3052 Top mount cover ACCESSORIES
452-5050 452-5050 Mounting tray 452-0222 452-0222 Replacement 5-year lithium battery
10
PROGRAMMING DONGLE
ACR/ARTEX
The DG-1 programming dongle allows
G406-4 SERIES ELT the fleet operator to program an aircraft’s
ACR/ARTEX 24-bit address into a compatible Artex ELT.
This makes it easy for ELTs to be switched
The G406-4 series ELTs are designed
between aircraft conveniently and effectively
for the general aviation market. Artex’s
with reduced maintenance and downtime.
G406-4 ELTs will automatically activate
The DGL-1 is designed to attach to the top
during a crash and transmit the standard
cover—both the cover and the dongle remain
swept tone on 121.5 and 243 MHz
in the aircraft, all that is needed is to swap
frequencies while simultaneously trans-
out the ELTs. Once the ELT is installed, the
mitting the 406 MHz encoded digital
DGL-1 automatically reprograms the ELT. 455-4010
message to the Cospat-Sarsat satellite
system for reduced identification and
search and rescue times.
• Operates on 121.5, 243, and 4-6 MHz 453-5012 Weight: 4.8 oz (DGL-1 dongle) | 1 oz (DGL-1 harness)
frequencies with worldwide coverage 11.5 oz (total weight)
Dimensions: 10.95 x 2.42 x 3.36 in (dongle mounted on top cover)
• Compatible with the ELT to navigation interface, which enables latitude and 2.5 x 6.1 in (programming dongle)
longitude data to be transmitted as part of the 406 MHz message Power: Input: 28 VDC ± 10 VDC
• Equipped with a Lithium-Ion battery with a five-year life Output: 5.6 VDC ± 0.3 VDC
• System versions listed below included install kits Temperature range: Operating: -20°C to 55°C
Storage: -55°C to 85°C
Compatible with: 110-406 NAV, 110-406HM NAV, 110-406ED NAV, B406-2,
B406-4, C406-1 Series, C406-2 Series, G406-2, G406-4
Weight: 3 lb 5.8 oz
Dimensions: 11.7 x 3.9 x 3.82 in (with mounting hardware)
Operating frequencies: 406 MHz, 121.5/234 MHz ± 0.005% (A3X)
EDMO# MFR# DESCRIPTION
453-4010 453-4010 DGL-1 main assembly
455-4010 455-4010 DGL-1 programming dongle
10
Crash Worthiness: 100 G @ 23 mSec 453-9700 453-9700 Remote switch for Artex commercial and military ELTs
Impact: 220 PSI (25 Kg from 6 in)
453-9702 453-9702 Remote switch for Artex commercial and military ELTs
Auto Reprogramming: 24-bit aircraft address (Mode S number) with night vision | Gray
Voltage requirements: +28VDC ±5VDC 455-0023 455-0023 Remote switch for ME406 ACE ELT
Current Draw: 300mA maximum
455-9700 455-9700 Military remote switch for Artex ELT | without night vision
NAV Systems: GPS-loran-inertial NAV-FMC
Temperature range: Operating: -20°C to +55°C 455-9703 455-9703 Military remote switch for Artex ELT | with night vision
Interface: ARINC 429- all ACCESSORIES
RS-232- 9600 baud, parity: none, data bits: 8, stop bits:
1, STX & ETX required, “A” identifier for lat; “B” identifier 131-0001 131-0001 Replacement 6V battery for ELTs from Artex
for long
transmitted using the integral and auxiliary antennas 50551-01 S1850551-01 Universal mounting bracket
• Two-frequency transmitter; when activated, provides 24-hour certified trans- 50551-02 S1850551-02 Universal mounting bracket
mission on 406 MHz (distress signal) and over 48-hours over on 121.5 MHz 50551-03 S1850551-03 Mounting bracket with draw latch (not ER-N)
• Available with two different GPS options: can be equipped with either an 50551-04 S1850551-04 Mounting bracket with draw latch (not ER-N)
integrated internal GPS or an NMEA Integra E-NAV GPS interface
• Choice of remote control panels with three-wire and two-wire installation
options
10
ACCESSORIES EDMO# MFR# DESCRIPTION:
20511-01 S1820511-01 Universal Mounting Tray 23502-03 S1823502-03 Kannad 406 AS & battery only
20516-99A S1820516-99 ELT battery kit | Includes: 6-year lithium battery 1000766 1000766 Kannad 406 AS Shipset | Includes: ELT, programming
(BAT300), label, o-ring, small foam wedge, large foam dongle, and carry-off bag
wedge, and install kit
1000768 1000768 Kannad 406 AS Shipset | Includes: ELT, programming
0124115 0124115 O-Ring gasket dongle, and mounting bracket
ACCESSORIES
20511-02 S1820511-02 Wall mounting bracket
20511-03 S1820511-03 Carry off bag
20516-99A S1820516-99 ELT battery kit | Includes 6-year lithium battery
KANNAD 406 SURVIVAL ELT (BAT300), label, o-ring, small foam wedge, large
foam wedge, and install kit
OROLIA
0124115 0124115 O-Ring gasket
Designed to be installed in the aircraft cabin or in a
carry off bag, the Kannad 406 Survival ELT provides a
direct connection to global Search And Rescue (SAR)
services when an emergency situation occurs. The ELT is
programmed with either the aircraft tail number, a serial
number or the aircraft operator designator. The Kannad OROLIA ELT PROGRAMMING ACCESSORIES
406 Survival ELT is available with or without a water OROLIA
switch and the three frequency transmitter is connect-
ed to the supplied antenna via a TNC connector. The PR600 ELT PROGRAMMER
Kannad 406 Survival ELT is fitted with a floating collar,
The PR600 programming tool works with
enabling it float upright, and a water switch sensor, al-
any PC computer with USB ports and Win-
lowing automatic activation when in contact with water.
dows 2000 or XP. This part is compatible
• Water Switch Sensor allowing automatic activation, 23502-03
with the four ICAO-defned protocols: tail
via contact with water (optional on AS-TNC variant) number, aircraft operator designator, serial
• Audible and visual activation indicators (buzzer and LED) number, 24-bit address. ICAO is designed
• Integrated self-test facility with visual indicator for results to work with all Kannad ELTs and program-
ming dongles as a replacement for the
• 6 year battery life-time PR550 programming equipment.
• Kit includes: PR600 programming inter-
face module, USB cable, instructions
Weight: 2.6 lb typical (incl. auxiliary antenna, floating collar & for programming, suit case storage and 1201570
batteries) transportation
Dimensions: 6.77 x 3.23 x 3.23 in (transmitter)
223 x 6.3 x 6.3 in (antenna deployed)
1202573
10
• Equipped with a simple plug-in audible alert indicator
• Relies on a lithium battery pack that provides a 5-year battery life
• Compatible with Ameri-King remote panel indicator E-04C ELT SYSTEM
ACK TECHNOLOGIES INC.
The E-04C ELT is a GPS-capable 406 ELT
Weight: ELT and battery pack: 1.6 lb designed for use on corporate and com-
ELT tray and straps: 0.2 0.2 lb mercial aircraft that transmits on 406 MHz
Remote control: 1.1 oz
Audio alert indicator: 1.5 oz and 121.5 MHz. The E-04C is certified to
TSO-C126b standard. This unit is certified
Dimensions: 7.75 x 2.85 x 2.85 in
to accept data from Garmin Aviation, Ben-
Transmission: Frequency: 121.5 MHz ±2 KHz and 406.037 MHz dix/King Aviation, NMEA 0183 and ARINC
Modulation: 406 MHz ±2 KHz bi-phase L (16KOG1D),
121.5 ±6 kHz (3K20A3n) 426 Data. If the unit losses power, it will
Swept downward: 1,400 to 400 hz retain all GPS coordinates. An excellent
Repetition rate: 3 Hz retrofit, the E-04C fits Artex and Kannad
Modulation factor ≥ 90%
Duty cycles: ≥ 45% panel cutouts.
Power at terminal (5Ω load): 121.5 MHz 20.7 dBm 50 hours • GPS capable ELT
406.037 MHz 37.3 dBm for 24.5 hours E-04C
Standby current: 26 µA (armed mode) • Certified to TSO-C126b standard
Peak current: 406 MHz burst: 1.5-2 Amps • Accepts Garmin Aviation, Bendix/King Aviation, NMEA 0183 and ARINC 429
Current: 121.5 MHz operation 75 mA
data
Peak EIRP with E-04.8 whip 121.5 MHz: +23 dBm, 200 mW
antenna and E-04.10.4 coax 406.037 MHz: 39.79 dBm, 12.7 watts • Retains GPS coordinates after power is removed
cable: • Remote fits Artex and Kannad panel cutouts
Temperature range: Operating: -20°C to 55°C
Storage: -55°C to 85°C
Crash activation: 4.5 FpS ± 0.5 FpS
Certification: FAA/Transport Canada Weight: 1.6 lb ELT and battery pack
TSO-C126, TSO-C91a Dimensions: 7.75 x 2.85 x 2.85 in
ETSO-2C126, ETSO-2C91a
Frequency: 121.5 & 406.037 MHz
COSPAS-SARSAT T.001 T.007 Modulation: 406 MHz ± 2 KHz bi-phase L (16KOG1D)
Industry Canada 1863A-E04AF 121.5 MHz ± 6 KHz AM (3K20A3N)
Type: TSO-C126 AF
Swept downward: 1400–400 Hz
Repetition rate: 3 Hz
Modulation factor duty cycle: ≥ 90% / ≥ 45%
EDMO# MFR# DESCRIPTIONS Power at terminal 50Ω load: 121.5 MHz 20.7 dBm 50 hours @ -20°C
407.037 MHz 37.3 dBm 24.5 hours @ -20°C
E-04 E-04 E-04 ELT System | Includes: lithium battery pack, Peak EIRP with E-04.8 whip 121.5 MHz 22 dBm 160 mW
whip antenna, remote switch, electrostatic antenna and E-04.10.4 coax 406.037 MHz 39.79 dBm 13.7 W
discharger, 60 ft coax cable, audio alert and cable, cable:
mounting tray, 15 ft remote cable, switch cover,
install/operation manual Peak EIRP with S65-1231 whip 121.5 MHz 23 dBm 200 mW
antenna and E-04.10.4 coax 406.037 MHz 39.79 dBm 13.7 W
cable:
Crash activation: 4.5 FpS ± 0.5 FpS Weight: 3.25 lb (1.5 kg)
Battery: Lithium, certified to TSO-C142a Dimensions: 8.5 x 3.5 x 4 in (216 x 89 x 102 mm)
Certifications: FAA / Transport Canada, TSO-C126b Frequency: 121.5 MHz / 406.037 MHz
TSO-C91a TSO-142a EASA, ETSO-2C126, ETSO-2C91a, Temperature range: Operating: -20°C to 55°C
TSO-142a, Industrial Canada, 1863A-E04AF, Brazil
ANAC/ANTEL: TSO-C126 TSO-C142a
ELT BATTERIES
REPLACEMENT ELT BATTERIES
EDMO# MFR# DESCRIPTION COMPATIBLE ELTS
ACR/ARTEX ELT BATTERIES
452-0128 452-0128 2-year | 6V lithium battery Artex ELTs
8322
10
8302
8302 8302 6-year lithium battery ELT 1000
8315
8315 8315 6-year lithium battery ELT 3000 & ELT 3000 HM
OROLIA/KANNAD
20516-99A S1820516-99 BAT300: 6-year lithium battery Kannad 406AF, 406AF-H,
406AP, 406AP-H, 121AF,
121AF(6D), & 121AF-H
20516-99A 40510-01
ACK
E-04.0 E-04.0 5-year lithium battery E-04 ELT
E-04.0
8008
8008 8008 5-year battery 8000 series
2020-0
MERL
BP-1005 BP-1005 2-year alkaline battery Larago ELTs
10
BP-1026 BP-1026 2-year alkaline battery CIR-11 ELTs
BP-1015 BP-1020
BP-1030 BP-1045
ELT ANTENNAS
Height: 17 in
Frequency: 121.5 MHz, 243 MHz, & 406 MHz
110-324 ELT WHIP / 121.5 & 234 MHZ VSWR: 2.0:1 — 121.5/243 MHz
ACR/ARTEX 1.5:1 — 406 MHz
EDMO# 110-324 Altitude: 55,000 ft
MFR# 110-324 Connector: BNC (female)
The 110-324 is a dual-band black whip antenna with an inductor.
Transmits on 121.5 and 243 MHz and designed for speeds up to
200 knots TAS.
• Compatible with ELT 110-4, ELT 200, and ELT 110-406
110-418 ELT FLEXIBLE WHIP / 406 MHZ
ACR/ARTEX
EDMO# 110-418
MFR# 110-418
The 110-418 is a replacement 1/4 wave, flexible whip antenna
for the Artex ELT Test Set.
Height: 17.4 in
Frequency: 121.5 MHz & 234 MHz
VSWR: 2.0:1 — 121.5/243 MHz
Altitude: 50,000 ft
Connector: BNC (female)
R A MILLER
110-329 ELT WHIP / 406 MHZ EDMO# AV-100
ACR/ARTEX MFR# AV-100
EDMO# 110-329 The AV-100 is a passive ELT antenna designed for general
MFR# 110-329 aviation use. It is a two-frequency wire whip antenna for
The 110-329 whip type, single-band ELT antenna for use with Artex low speed aircraft up to 250 knots. This antenna meets
ELT 110-406. The 110-329 transmits on 406 MHz only and has a DO-160G, Section 8, Category U for helicopter installa-
nickel finish. tions with unknown rotor frequencies.
• Compatible with ELT 110-406
Height: 24 in
10
paired with any Kannad ELT to essentially make it a porta-
ble survival unit. The antenna conveniently stores under the
EDMO# MFR# COLOR
ELT tray VELCRO® mounting strap.
110-333 110-333 White
• Portable antenna
110-333-04 110-333-04 Black
• BNC connection
110-340 ELT BLADE / 121.5, 243, & 406 MHZ 110-320 ELT ROD - DUAL INPUT /
ACR/ARTEX 121.5, 243, & 406 MHZ
The 110-340 is a tri-band, high-speed, blade ACR/ARTEX
antenna that is equipped with an innovative EDMO# 110-320
Tri-Band technology, bring the 121.5, 243, and MFR# 110-320
406 MHz frequencies into a compact package. The Artex 110-320 antenna is designed with a
The 110-340 offers a single connector for those glass-reinforced, polyester housing and uses a
installations that require that setup. proprietary tri-band technology to provide signal
transmission on 121.5, 243, and 406 MHz with 10
dB of isolation between ports. Use #280-0320,
optional gasket for 110-320 for installation. This
antenna has a gloss white finish.
Height: 14 in
Frequency: 121.5 MHz, 243 MHz, & 406 MHz
Height: 15.5 in
VSWR: 2.0:1 — 121.5/243 MHz
1.5:1 — 406 MHz Frequency: 121.5 MHz, 243 MHz, & 406 MHz
Polarization: Vertical VSWR: 2.0:1 — 121.5/243 MHz
1.5:1 — 406 MHz
Radiation pattern: Omni-directional
Polarization: Vertical
Impedance: 50Ω
Radiation pattern: Omni-directional
RF power capacity: 50 watts
Impedance: 50Ω, nominal
Altitude: 55,000 ft
RF power capacity: 25 watts
10
Height: 14.5 in
Frequency: 121.5 MHz, 243 MHz, & 406 MHz
Height: 10.1 in VSWR: 2.0:1 for 121.5/243 MHz
Frequency: 121.5 MHz, 243 MHz, & 406 MHz 1.5:1 for 4.6 MHz
VSWR: 2.0:1 — 121.5/243 MHz Polarization: Vertical
1.5:1 — 406 MHz Radiation pattern: Omni-directional
Polarization: Vertical Impedance: 50Ω, nominal
Radiation pattern: Omni-directional RF power capacity: 40 watts
Impedance: 50Ω Altitude: 50,000 ft
RF power capacity: 50 watts Connector: BNC (female) for 121.5/243 MHz
Altitude: 55,000 ft TNC (female) for 406 MHz
Material: Molded blade / gloss white to defense standard 80-161
Connector: BNC (female)
110-338 ELT ROD / 121.5, 243, & 406 MHZ 3001-12 LOW PROFILE ANTENNA
ACR/ARTEX POINTER INC
EDMO# 110-338 EDMO# 3001-12
MFR# 110-338 MFR# 3001-12
The 110-338 antenna uses Artex’s Tri-Band The 3001-12 low profile, ELT antenna that is tuned
technology to provide signal on 121.5, 243, to operate on 121.5 MHz and 243 MHz and has a
and 406 MHz. This antenna is equipped with 12 inch length and is swept back 20°. This anten-
a single connector setup for installations that na can use a custom length RG-58 cable or Pointer
require a single connector setup. This antenna part# 3002-10. This ELT antenna can be used in
is constructed with a durable, glass-reinforced conjunction with TSO-C91 and TSO-C91a approved
polyester housing. ELTs and aircraft with a rating of 250 knots.
10
EDMO#
110-338
MFR#
110-338
COLOR
White
ELT TEST SETS
110-338-1 110-338-1 Black
TPS 8715 TEST & PROGRAMMER SET
ACR/ARTEX
EDMO# 8715
MFR# 8715
AV300 ELT ROD / 121.5, 243, & 406 MHZ The TPS 8715 Test and Programmer Set
R A MILLER verifies, tests, and programs the full line
The AV-300 ELT antenna is intended for use with of general aviation ELTs from ARTEX such
a 406 MHz ELT (Emergency Locator Transmitter) as the ME406, ELT 345, and ELT 1000.
for general aviation. It is a passive three frequency This test set provides a simple method to
fiberglass rod whip antenna, designed for low speed verify and save an ELT’s ID after installing
aircraft (up to 350 knots). It has met DO-160G, Sec- or reprogramming should the beacon
tion 8, Category U requirements for robust vibration need to be re-registered once an aircraft’s
and is qualified for installation on helicopters with ownership changes. This rugged and
unknown rotor frequencies. compact device decodes the 406 MHz
Cospas-Sarsat transmissions through the
antenna and also detects the presence of
a 121.5 MHz signal.
• Quickly and easily program the full line of ARTEX General Aviation ELTs with
the desired protocol, NAV Data Baud Rate, and required information with the
Height: 14 in included cable
Frequency: 121.5 MHz, 243 MHz, & 406 MHz
• Records all data into an internal database which can be backed up to a PC
VSWR: 2.0:1 — 121.5/243 MHz
1.5:1 — 406 MHz • View the data from a computer independent of the TPS 8715 including the
Polarization: Vertical time stamp as proof of transmission and proper programming
Radiation pattern: Onmi-directional • Print via the USB interface to a PC (software download required)
Impedance: 50Ω, nominal • Downloadable software available once registration and training is complete
RF power capacity: 10 watts at no extra charge
Connector: BNC (female)
611-6013 611-6013 Coax antenna cable with BNC connecters for single output ELTs
ACR/ARTEX 611-6013-04 611-6013-04 Coax antenna cable with BNC connecter and a 6 ft length
EDMO# 8700
611-6052 611-6052 Teflon coaxial antenna cable, TNC to TPS, 6 ft in length
MFR# 8700
611-9010 611-9010 6 ft coax cable with TPS & BNC connectors for dual output ELTs
The TPS 8700 Test and Programmer Set
verifies, tests, and programs the full line of
ELTs from ARTEX. This test set provides a
simple method to verify and save an ELT’s
ID after installing or reprogramming should
the beacon need to be re-registered once an BT200 BEACON TESTER
aircraft’s ownership changes. This rugged WS TECHNOLOGIES, INC
and compact device decodes the 406 MHz
The BT200 beacon tester follows in the
Cospas-Sarsat transmissions through the
footsteps of the popular BT100. The BT200 is
antenna and also detects the presence of a
more accurate, inherently rugged, and intuitive
121.5 MHz signal.
to use. Packaged in a handheld design, the
• Quickly and easily program the full line of BT200 beacon tester performs code verifica-
ARTEX ELTs with the desired protocol, NAV tion, annual certifications, inspections, trou-
Data Baud Rate, and required information with the included cable bleshooting, and tests all Cospas-Sarsat 406
• Records all data into an internal database which can be backed up to a PC ELTs and older C91a ELTs without requiring
expensive equipment.
• View the data from a computer independent of the TPS 8700 including the
time stamp as proof of transmission and proper programming • Compact and rugged with an integrated
receiver
• Print via the USB interface to a PC (software download required)
• Android operating system
• Downloadable software available once registration and training is complete
at no extra charge • Waterproof and rugged construction with an IP68 rating
• Receives all Cospas-Sarsat frequency channels and ELT protocols
• Measures RF parameters along with modulation details on 406, 121.5 and
Weight: 1 lb (with antenna) 243 MHz
Dimensions: 6.7 x 3.7 x 1.53 in (without antenna) • Powerful 406 MHz graphic measurements for power, phase modulation and
406.025 receiver range: -60 dBm to 36 dBm (5W signal) in-band spectrum
Decoding: Per Cospas-Sarsat C/S T.001 (Issue 3, Revision5) • Internal antenna receives 406 MHz burst up to 10 meters away or directly
Operating system: Windows CE 5.0/Gamet OS 5.4 connect the beacon to tester at 50Ω
Microprocessor: 400 MHz Samsung • Receives full RF power with no attenuator required
Memory: Volatile: 64 MB SDRAM • Add text, audio, photos or videos to each measurement
Non-volitile: 128 MB Flash
Expansion: via MZIO™ bus standard • User-defined cable loss factor
Display type: TFT LCD high brightness touch screen • Create PDF Test Report
Display resolution: 240 x 320 pixels • Interfaces easily to a PC through a direct connection, wifi, or USB drive
Display viewing area: 3.5 in
• Cospas-Sarsat Second Generation Beacon (SGB) ready
10
beacon test unit that is perfect
for maintenance facilities, test
facilities, beacon manufacturers,
and beacon developers. The
FBM200A 406 ELT BEACON MONITOR STB100 tests 406 MHz, 121.5
WS TECHNOLOGIES, INC MHz, 243 MHz, and performs 406
EDMO# FBM200A MHz frequency stability. It has
MFR# 910-FBM200A accurate DC current and voltage
The 406 ELT Beacon Monitor from WS sensing that allows for the char-
Technologies, Inc. provides real-time acterization of the DC power supplied to a beacon. It also measures leakage
monitoring for all Cospas-Sarsat 406 current down to 200 nA and incorporates dual temperature probes to add tem-
MHz beacon transmissions. This device perature data to each measurement. The I/O interface has 2 relays, 8 analog
displays and decodes 406 messages with I/O lines, 8 ADC input lines to use with user-defined functions. An internal GPS
the ability to automatically receive all receiver allows for delta distance measurement for location encoded beacons.
past, present, and future Cospas-Sarsat The STB100 connects to a PC while an optional API set allows advanced users
channels. All information is organized to create their own customized user interface to control the unit.
in an XML format for use in a database; • Measures all 406 MHz, 121.5 MHz, 243 MHz, parameters
additionally, information can be time-
• Direct 50 RF input with the need of an attenuator
stamped and data logged. A GPS antenna
and receiver allow the user to obtain • Monitors the DC power supply to a beacon from 1 to 30 VDC, 5mA to 8A
precise geographical data which is then • Vin to Vout low dropout voltage of 100mV/A
automatically mapped to Google Earth__, • Measures beacon leakage current down to less than 200 nA
making it easy to view the GNSS location data with Google’s detailed array of
mapping features. Users can connect it to their PC via USB or Ethernet cables • Overload protection
- the latter has the added benefit of allowing users remote management and • Streams measurement data is saved into delimited text files for easy
diagnostics options. analysis
• Monitors 406 ELTs in real time, displays and decodes messages, measures • Creates PDF test report
and displays RSSI (receive signal strength), and displays distance to beacon • Connect up to two external temperature probes
• Automatically receives all past, present, and future Cospas-Sarsat channels • User-configurable with API set
with -125 dBm sensitivity (software adjustable sensitivity)
• Cospas-Sarsat Second Generation Beacon ready
• Automatically map the location of the decoded GNSS location data into Goo-
gle Earth™ for easy viewing and access to a detailed geographical interface
• Data is XMP formatted for use in database applications
Weight: 6 lb (2.73)
• Can send alerts via email and/or with a time stamp Dimensions: 8.3 x 11.1 x 2.5 in (210 x 280 x 64 mm)
• Connects to a user’s PC with a USB cable or ethernet interface which allows
for remote management and diagnostics; power is supplied through the
connection through a connection to a USB port or an AC adapter
• Multiple units can be connected together for a wider range of coverage
• Includes USB cable (2 meter length), AC to USB adapter, ethernet cable (2
meter length), molded 406 MHz monopole antenna, GPS active antenna (5
meter length), certificate of calibration, operator’s manual, and user interface
software
• Water switch actuation initiates beacon operation upon immersion in either TS200 ULB TEST SET
fresh or salt water DUKANE
• The battery used to power the DK120/90 will sustain beacon operation for a EDMO# TS-200
minimum of 90 days MFR# TS200
• Acoustic output of 160 dB with an operating frequency of 37.5 kHz The ULB Beacon Tester performs required
• The water switch is part of a low current triggering circuit functional and operational tests for DK100,
DK120, DK130 and DK140 Beacons. Can be
• The generated pulses are approximately 10 ms in duration, and occur about used while beacon is still mounted to the
once per 1 second airframe or to the aircraft’s flight recorder.
• Battery operated
• Easy to read LCD display
Weight: Beacon - 6.7 oz
Mount - 6 oz
Dimensions: 1.30 x 3.92 in
Operation depth: Surface to 20,000 feet (6096 meters)
Pulse length: 9.0 milliseconds Minimum
Weight: 13 oz
Pulse repetition rate: Not less than 0.9 Pulse/Sec.
Dimensions: 3.3 x 6.5 x 1.2 in.
Operating Llfe: 90 days (minimum)
Battery: 9V NEDA Type 1604A
Battery life: 7 years
Compatible beacons: DK100, DK120, DK130 and DK140
Acoustic output: Initial: 1060 dynes/cm2 RMS pressure @ 1 meter
(160.5dB)
After 90 days: 700 dynes/cm2 RMS pressure @ 1 meter
(157.0dB)
Temperature range: Operating: -2.2°C to +37.8°C (28°F to 100°F) EDMO# MFR# DESCRIPTION
Radiation pattern: Rated output over 80 percent of sphere TS-200 TS200 ULB Test Set
Certification: TSO-C121b / ETSO-C121b ACCESSORIES
10
TSO- C142a / ETSO-C142a
CT-200 CT200 Calibration Kit
PANEL MOUNT
TRANSCEIVERS & RADIOS Power supply requirements:
Current drain:
13.75 VDC or 27.5 VDC (automatic selection)
TX high: 5.0 A (maximum)
RX stand-by: 500 mA (maximum)
RX max audio: 4.0 A (maximum)
A120 VHF AIRBAND TRANSCEIVER Temperature range: Operating: -30°C to 60°C
Includes: Hand microphone (HM216), DC power cable,
ICOM AMERICA INC. microphone hanger kit, mounting bracket kit, and fuses
ICOM’s A120 VHF Airband
Transceiver is equipped with a
crisp, clear, dot-matrix display;
active noise cancellation EDMO# MFR# DESCRIPTION:
(ANC) and automatic noise
IC-A120 A120 VHF Airband Transceiver | vehicle mount
limiter (ANL*) technology; and
straightforward programming IC-A120B A120B Commercial Base Station | base station
and settings options that are IC-A120BE A120BE Commercial Base Station | 220V European
accessible from the front IC-A120BT IC-A120BT Transceiver with UT-133 Bluetooth installed
panel. The A120 meets IP54 ACCESSORIES
standards for dust-protection CS-A120 CSA120 A120 Programming Software
and water-resistance and can be connected to an optional Bluetooth unit for
HM-216 HM216 Standard Microphone
compatibility with third-party wireless Bluetooth headsets.
HM-217 HM217 Hand Microphone with 2 Programmable Buttons
• Dot-matrix LCD display is easy to read with crisp, clear text (displays alpha-
ICT ICO11 ICT ICO11 Power Supply Cabinet
numeric characters and icons)
MB-53 03 MB-53 03 Mobile Mounting Bracket | Includes: HM176
• Memory channels and other radio settings can be programmed from the Mic, SP53, MBA3 and harness
front panel (customizing functions can be restricted as needed, depending OPC-871A OPC592 Optional Headset Adapter
on the radio settings); this unit provides 200 memory channels with 12-char- OPC-592 OPC592 Adapter Cloning Cable
acter channel names and 8.33 kHz and 25 kHz channel spacing
OPC-478 OPC478 Cloning Cable/PC to Radio
• Built-in Active Noise Canceling (ANC) reduces background noise in the OPC-344 OPC-344 DC Power Cable
received and transmitted signals; the automatic noise limiter (ANL) reduces
11
• Lone worker function will sound a beep requiring the user to press a button
within a specific amount of time; the radio can also send an emergency
Weight: 2.2 lb signal to co-workers
Dimensions: 6.3 x 1.34 x 10.67 in
• Mode dependent scan feature is dependent on the operating channel; useful
Frequency coverage: Tx/Rx: 118—136.992 MHz if the user moves to another area
Rx Wx: 161.650—163.275 MHz
Channel spacing: 8.33 kHz / 25 kHz • Wide frequency coverage from VHF 136 MHz to 174 MHz
Number of channels: 20 regular memory, 50 group memory, 10 GPS, • A 40-pin slot provides the option for adding optional equipment to expand
10 Weather, 20 auto stack memory the F5021 transceiver’s capabilities: options such as a voice scrambler,
Power supply requirements: 13.8 VDC / 27.5 VDC (negative ground) UT109R or UT110R for secure communications or a DTMF decoder unit,
Frequency stability: ±5 ppm UT108R
Output power: Tx: 8 watt, typical (carrier power) • Other feathers: wide/narrow channel spacing, embedded ESN, ±2 ppm fre-
Temperature range: Operating: -30°C to 60°C quency stability, microphone hanger action programmable, 8 DTMF autodial
memories, power-on password, time out timer and lock-out penalty timer
11
MBA-3 MBA3 Rear panel adapter with card edge bracket kit, microphone hanger, key assign stickers
MB-53 02 MB53 Vehicle mounting bracket kit | Includes: mobile
mount tray, DC power cable (with connector),
hardware kit, SP-5 speaker, HM176 hand
microphone
PS80 PS80 Desktop power supply
SP-35 SP-35 External speaker
ID5100A VHF/UHF DUAL BAND D-STAR
SM-26 SM-26 Desktop microphone TRANSCEIVER
5060000022 5060000022 Replacement display A210, A220 ICOM AMERICA INC.
96916628 96916628 Rear connector install kit
EDMO# ID-5100A
MFR# ID5100A DELUXE
ICOM’s ID5100A VHF/UHF dual
band D-STAR transceiver offers
an intuitive user interface with
an industry-leading display. The
F5021 VHF VEHICLE MOUNT TRANSCEIVER ID5100 additionally interface with
ICOM AMERICA INC. Android™ devices and Bluetooth®
EDMO# F5021 51 headsets via optional Bluetooth
MFR# F5021 51 module. With the UT133 Bluetooth module installed, users are able to connect
ICOM’s F5021 VHF mobile transceivers wirelessly using the RS-MS1A Android app and remotely set DR functions such
are ideal for small to mid-sized systems as link a map application and send and receive message over the DV mode.
for public safety, large industrial and The intuitive touch screen interface provides quick operation for setting and
light commercial applications. The editing various functions and memories. The 5.5-inch display displays a large
F5021 offer multiple signaling, advanced keypad allowing for quick entry of alpha-numeric characters.
scanning, improved external channel • DV/DV Dual watch mode has simultaneous receive for FM/FM and FM/DV
control capability and a wide frequency modes and monitoring for two DV signals with priority on the main audio
range from 136 MHz to 174 MHz. The F5021 features popular signaling tones band
such as 2-tone, 5-tone, CTCSS and DTCS standard for setting up customized
• Integrated GPS allows users to transmit and receive position data; Position,
talk groups as well as PTT ID and quite stand-by when others are taking. This
course, speed and altitude are shown on the display
radio adds CTCSS/DTCS high speed decode and 2-tone decode accuracy. This
vehicle mount transceiver also has six programmable buttons that allow users • Bluetooth available with the UT-133 Bluetooth accessory for remote opera-
to customize the radio to their requirements. tion via the RS-MS1A Android app
• 128 memory channels into eight memory zones which can be identified by • DV/FM repeater list function assist in finding nearby repeaters
eight-character channel name • Dplus reflector linking commands have been added to DR function for easy
• Four-watt front mount speaker delivers loud and clear audio reflector operation
• Military-grade construction using diecast aluminum chassis and polycarbon- • SD card slot provides voice and data storage
ate front panel; tested to MIL standards 810F • DV fast data mode allows users to use data in place of voice frames to
• MDC 1200 compatibility with built-in signaling provides PTT ID, radio check, transfer data 3.5 times faster than in the conventional DV mode
radio stun, radio revive, emergency TX/RX (no ACK), five alias table
*continued on next page
• Up to ten multiple 2-tone and eight 5-tone code can be decoded on a channel
11
• Equipped with 9 programmable memories and a dual watch function that
identifiers in the radios memory using a USB stick. Also, a built in two place
allows users to monitor standby frequency
stereo intercom with support for stereo music ensures quality entertainment
• Perfect partner for Trig’s TT21 and TT22 Mode S transponders options are available.
• Approved for fitting to European and FAA-registered aircraft • TY96A and TY97A are 760 channel radio with 25 kHz spacing
• FAA TSO and EASA ETSO certification • Slim-line design measures only 1.3 inches in height and is highly efficient —
• Includes a built-in speaker amplifier and two-place intercom no cooling fans required
• Dual Control Features • Bright, clear display with simple user interface and unique “Push-Step”
• Ideal for flight training and two-place tandem aircraft and gliders; “smart button for faster tuning
set” feature automatically duplicates menu settings on each controller to • Stereo music/two-place intercom
prevent confusion while a clear display allows both pilots to see selection • “Say it Again” feature for repeated playback of the last transmission
being made
• Emergency button automatically sets 121.5 MHz
• Common features between both controllers include volume adjustment,
• USB port makes it possible to upload airfield databases containing 200+
frequency selection, transmit, and flip-flop
preferred frequency
• Ideal for retrofits; integrate with legacy radios including: KY 196A, KY 197A
and SL 40 models
Weight: 1 lb (standard)
• Free EASA minor change template available
Dimensions: 1.73 x 2.5 x 1.4 inches (controller)
1.89 x 2.6 x 6.3 inches (radio unit with socket)
Supply voltage: 11–33 VDC (TY91)
22–33 VDC (TY92) Weight: 2.09 lb
Typical current consumption: 200 mA receive @ 2A / transmit @ 14 V (TY91) Dimensions: 1.3 x 6.26 x 9.05 in
130 mA receive @ 2.5A / transmit @ 28 V (TY92)
Supply voltage: 11–33 VDC (TY96A)
Nominal transmitter power: 6 watt (TY91) 22–33 VDC (TY97A)
16 watt (TY92)
Typical current consumption 265 mA @ 14 V (TY96A)
Certification: TSO-C169a, TSO-C128a (receive mode): 140 mA @ 28 V (TY97A)
ETSO-2C169a, ETSO-2C128
Nominal transmitter power: 10 watt (TY96A)
16 watt (TY97A)
Certifications: TSO-C128a, TSO-C169a
ETSO 2C128, 2C169a,
EDMO# MFR# DESCRIPTION
TY91 VHF TRANSCEIVER
00883-00 00883-00 TY91 Remote unit with mounting tray
01079-00 01079-00 TY91 Complete kit | Includes: TC90 control head, radio EDMO# MFR# DESCRIPTION
box unit, mounting tray, & install kit 01788-0001 01788-0001 TY96A VHF 10-watt transceiver complete system
01451-00 01451-00 TY91 Dual control unit 01790-0001 01790-0001 TY97A VHF high power transceiver complete system
TY92 VHF TRANSCEIVER
00881-00 00881-00 TY92 Remote unit
SATCOM
Weight: 5 lb
Dimensions: 6.03 x 2.875 x 10.375 in (mounting depth)
Frequency range: Comm: 760 channels / 118–136.975 MHz SKYNODE S100
NAV: 200 channels / 108–117.95 MHz LATITUDE TECHNOLOGIES CORP
Preselect channel storage capacity – 100
Frequency stability: ±0.003% (-20°C to 50°C) The SkyNode S100 is a complete track-
Transmit power: 8 watts (minimum)
ing and data telemetry device in a small,
lightweight package. The SkyNode S100
Modulation: 85% (minimum) with limiting at 90%
is capable of interfacing with multiple
Sidetone: Adjustable to 40 mW into 500Ω mapping and information management
Receiver sensitivity: 1.5 µV (soft) 6 dB s+n/n or ½ flag Nav systems and it provides security and
COM selectivity: 6 dB @ ±7.5 kHz crew safety for air/ground logistics
50 dB @ ±17.5 kHz applications while making two-way data
60 dB @ ±25 kHz
access possible anywhere via the global satellite network.
NAV selectivity: 6db @ ±15 Khz
50db @ ±35Khz • Automatic flight following exceeds Forestry AFF live tracking requirements
60db @ ±50 kHz
• Reliable two-way data network/messaging
Squelch: Noise adaptive squelch with manual override
• Remote configurable
Audio output: 5 watts into a 4Ω speaker
40 mW into 500Ω headphones • Data logging and event triggers from external switches/buttons
Demod output: VOR adjustable from 0.25 arms to 0,75 arms • Internal fast-fix 20 channel WAAS GAS receiver
Certification: TSO-C34e, TSO-C36e, TSO-C37e, TSO-C38c, TSO-C40b
• Auxiliary GPS serial data output for Moving Map, Electronic Flight Bag and
406 ELT’s
• 000I flight schedule reporting
• Flight data-logging
MX385 NAV/COMM • Auxiliary backup battery option
EDMO# MX-385B
MFR# MX385 • Bambi Bucket Mission Tracker compatible
11
Electrically & mechanically replaces the • Latitude Air Tanker Information System ATIS compatible
older RT385 & RT485 radios. The MX-
385 features 760 COM channels & 200
NAV channels with 10-watts of power
output, auto squelch, active/standby Weight: 0.94 lb
frequency display with “flip-flop” capa- Dimensions: 6.8 x 4 x 1.1 in
bility, 10 programmable frequencies Power input voltage: 9–36 VDC
can be stored in memory, 28V operation, and a black or tan faceplate. Current: 0.16 A (nominal) / 0.5 A (transmit)
Data interfaces: Serial data port for laptop/message terminal
Auxiliary GPS serial data output
2 data ports
Weight: 5 lb 7 discrete I/0
3 analog inputs
Dimensions: 6.03 x 2.5 x 10 in (mounting depth)
Antenna options: Individual GPS and Iridium antennae, or dual element
Frequency range: COMM: 760 channels / 118–136.975 MHz GPS/Iridium antenna
NAV: 200 channels 108– 117.95 MHz
Preselect channel storage capacity – 100 Programming and network: Iridium short burst data (SBD)
Remote polling configuration
Frequency stability: ±0.003% (-20°C to 50°C) Custom event-based actions
Transmit power: 8 watts (minimum) Altitude: 50,000 ft
Modulation: 85% (minimum) with limiting at 90% Temperature range: Operating: -30°C to 60°C
Sidetone: Adjustable to 40 mW into 500Ω RTCA Env.: DO-160E Cat. A4-BAB[(SM)(U2F)]
Receiver sensitivity: 1.5 µV (soft) for 6 dB s+n/n or ½ flag NAV XXXXXXZBBXXXBXXXXX
COM selectivity: 6 dB @ ±7.5 kHz Certification: FAA, TCCA, and EASA STC’s are available for helicopters
50 dB @ ±17.5 kHz and fixed-wing aircraft
60 db @ ±25 kHz
NAV selectivity: 6 dB @ ±15 kHz
50 dB @ ±35 kHz
60 dB @ ±50 kHz
Squelch: Noise adaptive squelch with manual override EDMO# MFR# DESCRIPTION
Audio output: 5 watts into a 4Ωspeaker S100-001 S100-001 SkyNode S100
40 mW into 500Ω headphones
ACCESSORIES
Demod output: VOR adjustable from 0.25 arms to 0.75 arms
KT006 L275-10002 Installation kit for S100 | Includes straight RF
Certification: TSO-C34e, TSO-C36e, TSO-C37d, TSO-C38d, TSO-C40c connectors, DB25 connector backshell & crimp pins
information)
HANDHELD RADIOS
Weight: 12 oz (with BP-288 battery pack)
Dimensions: 2.3 x 5.8 x 1.3 in (58.9 x 148.4 x 31.8 mm)
A25 SERIES VHF HANDHELD Frequency coverage: A25N (NAV and COM)
ICOM AMERICA INC. Tx: 118.000–136.992 MHz
Rx: 108.000–136.992 MHz
The A25 Series VHF Airband Rx (weather): 161.650–163.275 MHz
Handheld Transceiver features
A25C (COM)
a powerful, six-watt transmitter Tx: 118.000–136.975 MHz
and an IP57 waterproof rating Rx: 118.000–136.975 MHz
allowing operations in severe Rx (Weather): 161.650–163.275 MHz
weather. A large, 2350 mAh Transmit output power: 6.0 (PEP) / 1.8 W (carrier) typical (at 7.2 VDC)
Li-ion battery provides operation Channel spacing: 25 / 8.33 kHz
up to 10.5 hours. The easy-to-use Number of channels: 300 channels / 15 groups
interface combined with a large Power supply requirements: 7.2 VDC (BP-288) / 11.0 VDC (external DC jack)
2.3-inch display offers stress-
Current drain: Tx: <1.8A (high)
free programming and in-flight Rx: <500mA (max audio) / 90mA (typical)
operation. The A25 radios are Type of emission: 6K00A3E, 5K60A3E, 16K0G3E (Weather)
offered in in two versions: the
Antenna impedance: 50Ω
A25C communications transceiv- IC-A25C IC-A25N
er providing communications Temperature range: Operating: -10°C to 60°C (14°F to 140°F)
only, and the A25N with built-in
Bluetooth®, GPS and VOR navigation.
The A25N with simplified waypoint NAV feature guides pilots to their destina-
EDMO# MFR# DESCRIPTION
tion using the current position from GPS as well as from GLONASS and SBAS.
The waypoint NAV feature has two functions: Direct-to NAV and Flight-plan A25N COMMUNICATION PLUS NAVIGATION TRANSCEIVER
NAV. In Direct-to NAV mode, the A25N provides guidance to a specified way- IC-A25N A25N Includes: Antenna (FAB02AR), Battery pack (BP288),
point; in Flight-plan NAV mode, pilots are guided through a series of sequential Belt clip (MB133), Headset adapter (OPC2379),
waypoints. The A25N can store up to 10 flight plans and 300 waypoints. BC224 and BC123SA Rapid charger, & Hand strap
A25C COMMUNICATIONS ONLY TRANSCEIVER
11
11
ICOM AMERICA INC. Dimensions: 2.1 x 4.9 x 1.2 in
EDMO# F3001 03RC
Frequency coverage: 136–174 MHz
MFR# F3001 03RC
Number of channels: 1024
ICOM’s F3001 VHF handheld radio has very few, gener-
Number of zones: 128
ously sized, knobs and buttons providing easy operation
without special training. The simplified interface is ideal Power supply requirement: 7.5 VDC
in industries with high turnover environments such as Antenna impedance: 50Ω
shiftwork where the radio is passed from one worker
to another. The F3001 series is designed to meet the
requirements of schools, retail, golf courses, community
centers and others who need basic radio needs. This
16-channel radio provides five-watts VHF and four-watts
UHF frequency coverage from 138 MHz to 176 MHz or
450 MHz to 512 MHz.
• VOX capability provides hands-free operation
• 2-Tone, 5-Tone, CTCSS, DTCS and MDC1200 PTT ID &
emergency signaling
• Provides priority scan, DTMF autodial, low battery
alert, talk around function, 2-step power save, enhanced emergency, sur-
veillance function, time out timer, lone worker function, and three-color LED
display
Weight: 9.4 oz
Dimensions: 2.28 x 4.38 x 1.41 in (with BP-265)
Frequency coverage: 136–174 MHz (Tx and Rx)
Channel spacing: 12.5 kHz, 15/30 kHz
Number of channels: 16 total
PLL channel step: 2.5 kHz, 3.125 kHz (VHF)
The changing nature of airspace communications demands
Power supply requirement: 7.2 VDC (nominal)
equipment that keeps pace with the times. EDMO helps their
Current drain: Rx: 70 mA (stand-by) / 250 mA (rated audio)
Tx: 1.25 A (high) customers stay at the technological forefront by supplying the
Output power (Tx): 5 W, 2W or 1W (Hi, L2, L1) best in transceivers, handheld radios, and SATCOM equipment.
4 W, 2W or 1W (Hi, L2, L1)
Temperature range: Operating: -22°F to 140°F
Call one of our friendly sales representatives with questions, or
Includes: BP265 battery pack, Antenna, MB124 belt clip, BC193 find exactly what you need online at edmo.com.
battery charger
ICOM ACCESSORIES
MICROPHONES
CHARGERS
ADAPTERS ANTENNAS
FA-B02AR
11
BC121N & BC197 CLONING CABLES
BC-167SA BC167SA 12V / 500 mA AC adapter A24 and A6 OPC-1862 OPC1862 USB cloning cable
(US plug)
OPC-478U OPC478UC Cloning cable with USB plug & driver software
BC-167SD BC167SD 12V / 500 mA AC adapter A24 and A6
(Euro plug) PROGRAMMING SOFTWARE
BC-167NA BC-167NA 12V / 500 mA AC adapter A24, A6, A23, A5, A4 CS-A25 CSA25 A25
(US plug) CS-F3021 CSF3021 F3021, F5021 & F5011
CIGARETTE LIGHTER ADAPTERS CSF3400D CSF3400D F3400D, F5400D
CP-12L CP12L Cigarette lighter adaptor w/ A4, A5, A23 CS-A120 CSA120 A120 programming software
noise filter
CP-20 CP20 12V/24V cigarette adapter A24, A6, & A25
MIC/HEADSET ADAPTERS
OPC-2144 OPC-2144 Right angle adapter Use with OPC478UC
OPC-2379 OPC-2379 Headset adapter cable A25
OPC-440 OPC440 8-pin RJ-45 extension cable C-2720H/2820H/
FSG 7016 UHF/AM HANDHELD RADIO
V8000/280H/5100 MORCOM
OPC-499 PA OPC499 Headset adapter A24, A6 EDMO# F10165
OPC-647 OPC647 A120 Extension cable A120 hand mic
MFR# FSG 7016
This compact and rugged unit is one of the few handheld
radios capable of operating within the complete 225MHz –
400MHz AM radio band. In addition, it provides water and
shock proof properties for continued operatations in the
BELT CLIPS most demanding conditions. As a favorite amoung air force
personnal around the world, the FSG-7016 also makes for an
ideal handheld radio for search and rescue, forward air control
(FAC), and taxiway operations.
MB-96N MB-133
Weight: 2.6 lb
EDMO# MFR# DESCRIPTION COMPATIBLE Dimensions: 2.95 x 1.5 x 8.86 in
TRANSCEIVERS Frequency range: 225–399.975 MHz / 7,000 channels
MB-96N MB96N Swivel belt hanger A24, A25, M73 Modulation: AM A3E, 350, 3,000 Hz
MB-133 MB-133 Belt clip A25N, A25C Operating mode: Simplex
Weight: 70 g
Weight: 90 grams
Dimensions: 92 x 43 x 73 mm
Dimensions: 124 x 116 x 48 mm
Input voltage: 11–31 VDC
Input voltage: 11–31 VDC
Operating power: 3W
Operating power: 3W
Power transcoder: Decodes Mode A, C, and S via DC input
Power transcoder: Decodes Mode A,C and S via DC input
Power classification: 978MHz UAT Transmitter: DO-282B Medium Power
Power classification: 978MHz UAT Transmitter: DO-282B Medium Power
LED position light: Color: aviation white
LED position light: Color: aviation red Intensity: 40 candelas
Intensity: 40 candelas
WAAS GPS: Tracking- 166dBm
WAAS GPS: Tracking- 166dBm Reacquisition- 160dBm
Reacquisition- 160dBm Cold Start- 148dBm
Cold Start- 148dBm
WiFi Configuration: 802.11 b/g/n
Certification: ADS-B (TSO-C154c, Class B1S)
GPS (TSO-C145d, Class Beta 1) App Compatibility: iOS & Android
Barometric altitude sensor (TSO-C88b) Certification: UAT Transmitter: TSO-154c (RTCA/DO-282B) Class B1S
Position Light (TSO-C30c, Type I) Position Lighting: TSO-C30c Type III & SAE/AS8037
Anti-collision light (TSO-C96a, Class II) WAAS GPS: TSO-C145e (RTCA/DO-229E) Class Beta 1
FCC ID 2AFFTUAT016R
ADS-B Out: §91.225, §91.227, AC 20-165B
GNSS Position: AC 20-165B
12
time and cost — and provides pilots with
Operating Power: 3W 1090ES ADB-S capable Class 1, Mode S
1090ES ADS-B Transmitter: Power Classification 250 Watts Nominal technology. 00225-00
LED position light: Color: aviation white The TT31 is TSO approved for fitting to Euro-
Intensity: 20 candelas
pean and FAA registered aircraft. With a software upgrade and a connection to
WAAS GPS: Tracking - 166dBm
Reacquisition -1 60dBm an appropriate GPS, this will make the TT31 compliant with the FAA final rule on
Cold Start - 148dBm ADS-B Out for 2020
Control Head: Physical - RS232 or Power Line Modem • Compatible with popular GPS position sources including the Garmin GNS
Protocol - UCP and GTN navigators
Certification: FCC ID: 2AFFTP200S
• Free FAA ADS-B STC for 650 aircraft types
• Certified for IFR/VFR flight
• TIS traffic capabilities for portable and panel mount avionics
EDMO# MFR# DESCRIPTION
UAX9005801 UAX-90058-01 tailBeaconX (Experimental)
UAX9005903 UAX-90059-03 tailBeaconX (TSO) Weight: 2.9 lb
UAX9005905 UAX-90059-05 tailBeaconX TSO & AV-30C Bundle Dimensions: 1.57 x 6.30 x 9.4 in
Type: Class 1 Mode S Level 2 els
Supply voltage: 11–33 VDC
Current consumption Idle: 0.22 A
(typical @ 14V): Active: 0.45 A
PINGSTATION 2 Transmit power: 240 watt @ connector, nominal
UAVIONIX Temperature range: Operating: -20°C to 70°C
EDMO# UAX9007801 Cooling requirement: No fan required
MFR# UAX-90078-01 Compliance: ED-73B, DO-160E, DO-178B Level B, DO181C, DO-260B
Class B1S, DO-254 Level C
The pingStation 2 is a dual band (978MHz and
1090MHz), networkable Automatic Dependent Certification: ETSO C166A, 2C112B
TSO-C112, TSO-C166
Surveillance – Broadcast (ADS-B) receiver with a
Power-Over-Ethernet (POE) interface enclosed in
an IP67 rated protective enclosure. pingStation
provides ground, surface, or low altitude ADS-B
surveillance. Robust enough to be permanently EDMO# MFR# DESCRIPTION
mounted outdoors in harsh environmental condi- 00220-00 00220-00-01 TT31 Transponder only
tions, and small enough to be used as a mobile 00225-00 00225-00-01 TT31 Complete Kit | Includes: mounting tray and
asset for roaming operations. install kit
• Networkable *continued on next page
• Weatherproof IP67 enclosure
knots.
• Certified class 2 transponder with 130 00772-00
watts nominal output TN70 WAAS GPS KIT
• Integrated altitude encoder TRIG AVIONICS LIMITED
EDMO# 01381-00
• FAA TSO C166b Class 1 device — 2020 mandate ready — Free FAA ADS-B
MFR# 01381-00
STC covers 576 aircraft types
The TN70 WAAS GPS Receiver
• Compatible GPS units: Garmin GTN/GNS WAAS navigators, Trig TN70 kit,
and Antenna kit is a lightweight
FreeFlight 1201, and NexNav Mini
solution for adding ADS-B Out
and compliant WAAS GPS
capability to an existing ADS-B
TC20 CONTROLLER FOR TT22/TT21 installation. The included WAAS
GPS certified antenna (TA70)
The TC20 control head is a panel mount-
is designed to deliver excellent
ed unit to control a remote mounted
ADS-B Out performance. Because installation does not require space on the
TT21 or TT22 Mode S transponder. It
panel, the TN70 can be installed as a discrete GPS unit leaving the existing
mounts into the panel using a 57 mm
panel equipment as is.
round hole or smaller compact mount.
The unit displays the operation mode of • Includes WAAS GPS receiver and the Trig TA70 antenna
the transponder, reported pressure alti- • Meets TSO-C145 – compliant for 2020 ADS-B
tude, current squawk code, and flight ID.
• Complete your ADS-B Out solution
• Lightweight and easy to install with no panel space
• Compatible with Trig transponders
Weight: 0.8 lb
Dimensions: Controller: 1.8 x 2.4 x 2.1 in
Transponder: 1.8 x 2.6 x 6.2 in, in tray
Type: Class 1 Mode S transponder level 2els ADS-B Class B1S
12
12
Temperature range: -20°C to 55°C The SSD120-35C is a rugged and reliable
Altitude: -1,000ft – 35,000 ft altitude digitizer for applications where
Certification: DO160F DO160F size, weight, and economy are critical.
DO 178B Level C DO 178B Level C This encoder accurately measures air
TSO C74d TSO C74d
TSO D88b (Encoder) pressure and converts this measurement
into the ICAO parallel data as set forth in
the International Standard for Pressure
Altitude Transmission.
EDMO# MFR# DESCRIPTION Incorporating one ICAO gray code port and two RS232 serial altitude data out-
705832-00 705832-00 STX-165 transponder | Panel mount
puts, this encoder is a simple and robust addition to any avionics installation
requiring pressure altitude information for multiple aircraft systems. The serial
705831-00 705831-00 STX-165R transponder | Remote mount
data protocol is commonly used to provide pressure altitude data to ADS-B,
ACCESSORIES GPS, auto-pilots, transponders and other navigation devices.
305561-91 305561-91 OAT probe for STX-165 • Six serial data protocols are available
• Data protocol is selected through internal shunts or via software set-up
• One ICAO pressure altitude gray code and two RS-232 serial outputs
• User selectable resolution of either 10 or 100 feet through internal shunts
ARINC-MANCHESTER CONVERTER • Installation hardware includes: quick release mounting tray, mating electrical
SHADIN AVIONICS connector and backshell, 1/8-27NPT to tube and plug, and installation
The ARINC-Manchester Converter (AMC) manual
is designed to intercept and inject
messages between the radio management
unit and the RCZ-800/850 integrated Weight: 4.3 oz
communications unit. The AMC acts as a Dimensions: 4.5 x 2.9 x 0.91 in
controller for the ADS-B compliant tran-
Voltage: 12–30 VDC
sponder via a A-429 bus. Messages from
the RMU bus are forwarded to the COM Current: 0.25A @ 14 VDC
0.27A @ 28 VDC
bus while return status message from the
Altitude: 1,000 to 35,000 ft
transponder, combined with the transpon-
der, are transmitted on the RMU bus. Temperature range: Operating: -4°F to 158°F
Storage: -85°F to 185°F
Warm-up: 0 seconds @ 68°F
Certification: FAA TS- C88a, EASA TSO-C88a,
Weight: 0.9 lb RTCA DO-178 software, RTCA-DO-160E
Dimensions: 6.9 x 4.2 x 2.2 in
Weight: 5.9 oz (low altitude) SSD120(XX)N models does not allow field modification and must be ordered from the
6.3 oz (high altitude) factory as a “mod.1” version device to function with these earlier Narco transponders.
Voltage: 12VDC @ 220mA / 28VDC @ 270mA (low altitude)
12VDC @ 55mA / 28VDC @ 60mA (high altitude)
ICAO Gray Code output: Yes
RS-232 output: Yes (except for SSD120-(XX)N model)
RS-485 output: No (except for SSD120(XX)N-RS model) SAE 5-35 ALTITUDE ENCODER
Electrical connector: D-Subminiature 15-pin, SSD120-(XX)N SANDIA AEROSPACE
D-Subminiature 15-pin & 9-pin, -RS232 (low/high EDMO# 705154-00
models) MFR# 705154-00
D-Subminiature 15-pin plug & 15-pin recpt, -RS models
Static line connection: Dual 1/8-27NPT (low altitude) The SAE 5-35 altitude encoder provides
Dual 1/8-27NPT or 1/8 Tube Swivel Fitting (high accurate altitude data by combining
altitude) altitude encoding, digital altitude on
Altitude: 30,000 to 42,000 ft (low altitude) two RS-232 outputs, and altitude inflight
50,000 to 100,000 ft (high altitude) monitoring (AIM) into a single compact
Temperature range: Low: -20°C / -55°C (E models) and reliable unit. The SAE 5-35 provides
High: 70°C Gillham Grey Code to the aircraft’s Mode
Approvals: TSO-C88a C transponder using innovative pressure
ETSO-C88a
MIL-STD-704E circuitry that greatly reduces warm up
RTCA DO-160E time. This unit provides digital altitude, on two independent RS232 outputs, in
10-foot increments to be used by GPS and Terrain Awareness Systems (TAWS).
This unit provides altitude data from -1,000 to 35,000 feet — ideal for installa-
tions in piston, turbine, and jet aircraft. The altitude inflight monitoring (AIM)
EDMO# MFR# DESCRIPTION system ensure that the aircraft altitude remains within the selected altitude and
provides alerts whenever deviations of 100 feet or more occur.
SSD120-30N SSD120-30N Altitude Encoder | low altitude > 30K
SSD12030NE SSD12030NE Altitude Encoder | low altitude > 30K /
• Certified to 35,000 feet
extended temp. range: -67°F to 158°F • Transponder Grey Code resolution in 100 feet
30N-MOD1* SSD120-30N(MOD.1) Altitude Encoder | low altitude > 30K • Two RS232 digital output with 10 foot resolution
SSD120-35N SSD120-35N Altitude Encoder | low altitude > 35K
• Altitude In-flight monitoring
TWO ASYNCHRONOUS RS-232 OUTPUTS (LOW ALTITUDE)
30N-RS232 SSD120-30N-RS232 Altitude Encoder | low altitude > 30K
30NERS232 SSD120-30NE-RS232 Altitude Encoder | low altitude > 30K /
extended temp. range: -67°F to 158°F Weight: 0.7 lb
30NRS232M1* SSD120-30N-RS232 M 1 Altitude Encoder | low altitude > 30K Dimensions: 1.06 x 4.87 x 4.74 in
35N-RS232 SSD120-35N-RS232 Altitude Encoder | low altitude > 35K AIM off-voltage: 50V
Weight: 5.1 oz
8800T ALTITUDE ENCODER Dimensions: 6 x 2.65 x 1.3 in
SHADIN AVIONICS Voltage: 10–32 VDC
The 8800T altitude encoder with Current: 160 mA, typical
Trimble and Garmin Loran/GPS serial Range: Mod 5: 950 to 30,750 ft, Gray Code output
interface is capable of feeding Grey Mod 9: 950 to 42,000 ft, 2 x RS-232 outputs
Code information into a Mode C tran- Accuracy: ± 20 ft, typical
sponder while simultaneously feeding ± 50 ft, maximum
12
altitude data over RS-232 to the GPS Warm-up current draw: 14 VDC: 160 mA
and the altitude management system 28 VDC: 220 mA
providing instantaneous vertical speed Warm-up time: 70°F: 60 seconds
0°F: 210 seconds
calculations. Shadin’s 8800 Altitude En-
coder is a solid-state Mode C encoder Altitude: Gray Code (parelle) output: 100 ft
RS-232: 10 ft or 100 ft
with a high resolution converter that in-
terfaces with most transponders while Temperature range: Operating: -4°F to 131°F
simultaneously transmitting over RS-232 altitude to GPS (and Loran) receivers. Construction: Gold-plated connectors
Anodized diecast aluminum chassis
The 8800 makes advances VNAV functions and 3D global positioning possible Certification: FAA TSO-C88a
by providing automatic, real-time altitude input to the aircraft’s GPS receiver.
Includes: Quick release mounting tray, 4-foot harness, 4-foot static
This is particularly beneficial in situations in which the GPS unit is able to line, and installation manual
receive GPS data from three satellites instead of the required four (the fourth
maybe behind the horizon or obstructed by the tail or wing of the aircraft)
because the 8800 supplies precise, real-time altitude reference data as a
substitute for the fourth satellite. EDMO# MFR# DESCRIPTION
• Model 8800-T has a Trimble Loran/GPS serial interface
A-30.5 A-30.5 A-30 Encoder | Mod 5 gray code
• Provides RS-232 formatted data to selected GPS/Loran systems as well as A-30.9 A-30.9 A-30 Encoder | Mod 9 gray code, RS-232 dual outputs
the Shaden AMS-2000 Altitude Management System
ACCESSORIES
• Supplies Gray Code altitude information 1-03 A30.11.01 Wiring harness
• Allows display of altitude in 10-foot increments 1-04 A30.06.04 Black hose | Approx. 3 ft
• One-foot resolution allows for true VNAV functions A-30.06K A-30.06K Hardware install kit | Includes: 1/8 NP port adapter, (4)
3/8 spring hose clamp, (6) 5/16 spring clamp, 3/16 nylon
• All solid-state microprocessor designed for reliability T-fitting, (2) reducing adapters, & a sheet altimeter placard
A-30E A30.03 Mount tray | Includes: mounting nut and bolt
A-30P1 A-30P1 Mod 3 cable assembly
Weight: 11 oz A30.11.01 A30.11.01 Cconnector and wire assembly | 4 ft
Dimensions: 6.125 x 3 x 2.125 in A30.11.02 A30.11.02 Add-on wire kit
Power input: 14–28 VDC @ 300 mA
Warm-up time: 6 min. from 75°F / 12 min. from -4°F
Serial Interface: RS-232: from pin 7, 9,600 bps, eight bits, no parity, one
stop bit. One message per second.
Altitude: -1,000 to 35,000 ft
Temperature range: Operating: -20°C to 55°C
Certification: TSO-C88a
M650 PRESSURE ALTITUDE ENCODER ATS-400 ALTITUDE DIGITIZER TEST SET &
DAVTRON INC SIMULATOR
The model M650 is a pressure altitude TRANS-CAL INDUSTRIES INC
encoder for testing blind encoders on EDMO# ATS-400
a test bench. These encoders feature MFR# ATS-400
sunlight readable displays which dim au- The TCI Model ATS-400 tests, displays,
tomatically during night time operations and simulates the output of altitude
and are capable of measuring altitude reporting equipment conforming to
from -1,000 to 62,700 feet. the ICAO standard for SSR pressure
altitude transmission. The ATS-400
uses advanced RISC micro-processor
for decoding and displaying the output
of Trans-Cal altitude encoders in both
numeric and binary forms with an input
range of -1,000 feet to 126,000 feet. The
Weight: 5 oz
ATS-400 can interface with an IBM based
PC for cross-reference and two-way data communication if required.
Dimensions: 2.9 x 1.65 x 1.4 in (650-1)
2.375 x 2.375 x 1.4 in (650-2) • Simulates altitude data in accordance with ICAO standards
Input voltage: 14–28 VDC • Tests altitudes from -1,000 to 126,000 feet
Input current: 0.35 Amp, maximum • Simulation mode provides technicians with a known, good ICAO altitude
Pressure altitude: -1,000 to 62,700 ft code source
• Tests altitude inputs to transponders, GPS, MFD, auto-pilots, and other NAV
devices
EDMO# MFR# DESCRIPTION
650-1 1030-650-1 Rectangle panel mount
Weight: 3.5 lb
650-2 1031-650-2 Round panel mount
Dimensions: 6.16 x 5.68 x 10 in
Voltage: 7.5–35 VDC, 400 mA (max)
Temperature range: Operating: -0°C to 50°C
Connector Ports: ICAO input, ICAO simulate
12
SERIALIZERS
12
ST 32 SIGNAL CONDITIONER
ALTITUDE SERIALIZER SANDIA AEROSPACE
TRANS-CAL INDUSTRIES INC EDMO# 305952-00
EDMO# IA-RS232CS MFR# 013-00337-00
MFR# IA-RS232C-S
The ST 32 is a dual function signal
The IA-RS232CS altitude serializer is a conditioner that converts four sinusoidal
solid-state interface adapter that converts output channels from tach generators and
parallel, 10-bit ICAO pressure altitude one analog, strain gauge pressure channel
data to a fan-out of two RS-232 compliant into a digital signal that can be used by
outputs. This device provides a simple aircraft displays and control systems.
and robust method for converting parallel
data into serial data and then retransmits
to multiple aircraft systems.
• Serial data provided from the two
RS-232 outputs can be used to provide Weight: 0.62 lb
pressure altitude data for GPS or other Dimensions: 4.8 x 4.8 x 1 in
navigation devices Voltage: 18–32.2 VDC
• Compatible with Trans-Cal, Terra, ACK, Current: < 1 A, heater on
< 100 mA, heater off
and Narco
Altitude: 55,000 ft, maximum
Temperature range: Operating: -55°C to 70°C
Weight: 12 oz
Voltage: 12–30 VDC
Current: 0.09 A (90 mA)
Altitude: -1,000 to 62,700 ft
Temperature range: Operating: -20°C to 85°C
• Provides communication across all public safety and parapublic voice com- INSTALLATION KITS
munication bands supporting 29.7 to 960 MHz communications 041881-01 129-041881-01 Installation kit for RT-7000
• 29.7 to 960 MHz AM/FM P25 Phase 1 & 2 ACCESSORIES
• Uniquely designed for maximum interoperability and upgradability SAR7000AT AT-SAR7000 RT7000 SAR module antenna
• Best-in-class NVIS Green B-compliant, multi-color touchscreen display RCDU-7-2-1 RCDU-7000-002-001 RT-7000 remote display unit / non-lighted
• Multi-key FIPS-140-2 encryption bezel
RCDU-7-2-2 RCDU-7000-002-002 RT-7000 remote display unit / NVIS green
• 3 embedded internal transceivers can be any combination of: broadband
13
backlighting
transceiver: 29.7 – 960 MHz AM/FM, P25 conventional, Motorola APX-8000 APM-7000 APM-7000-001-001 Avionics personality module for RT-7000
modules panel mounted radio
• Easy, embedded relay/simulcast across 2-5 transceivers or receiver/trans- 123-371761 123-371761-02 RT-7000 to APX adapter cable
mitters 129-271260 129-271260-01 J101 D-sub connector / 78 position socket
• Front panel-programmable up to 3000 preset channels with crimp contacts
129-271261 129-271261-01 J1-5 D-sub connector / 9 position socket with
• Color LCD display with programmable day/night backlighting: MIL STD 3000 crimp contacts
NVIS Green B-compliant
171912-01 129-271261-01 J101 straight backshell connector
171936-01 129-171936-01 J105 straight backshell connector
171984-01 129-171984-01 J101 right angle backshell connector
Weight: 8.5 lb (approximate)
Dimensions: 5.75 x 4.50 x 9.82 in 171985-01 129-171985-01 J105 right angle backshell connector
Voltage requirements: 27.5 VDC ±20% 371761-01 123-371761-01 ICT cable to APX cable adapter
Channel spacing: 6.25 MHz / 8.33 MHz / 12.5 MHz / 25 MHz 671829-01 149-671829-01 J101 right angle backshell connector
Frequency range: AM/FM Analog 29.7-960 MHz, including bands:
30–50 MHz / LMR 071622-01 130-071622-01 Antenna switching unit for RT-7000
30–88 MHz / military 241803-09 129-241803-09 J105 straight backshell power connector
87.5–108 MHz / FM broadcast
108–118 MHz / VOR voice 271602-01 129-271602-01 KVL keyloading cable for RT-7000
118–154 MHz / ATC and civil air patrol
136–174 MHz / LMR 072407-01 300-072407-01 RT-7000 RMR dual mounting tray
156–174 MHz / maritime
225–400 MHz / military 072411-01 300-072411-01 RT-7000 RMR single mounting tray RMR
380–520 MHz / LMR
764–960 MHz / LMR
Transmit power: ATC COMS: 4-watt, min.
AM: 4-watt, min.
FM: 10-watt
P-25: VHF – 6-watt / UHF – 5-watt
700/800 MHz: 3-watt
APCO P-25: All P-25 bands: Not finding what you need?
Conventional Common Air Interface (CAI) Phase I & II
Trunking If you don’t see what you need here, it’s likely we have it, or can order
Analog Trunking (SmartZone, SmartNet) it in for you. You can also check out the newly improved edmo.com.
With thousands of parts a click away, EDMO has you covered. And as
always, our friendly customer service and sales staff is here for you.
Call us at 1.800.235.3300.
13
Power requirement: 27.5 VDC (±20%) • Dual independent mic/headset ports
Current requirement: Receive: 2.5 A • 350 preset channels | 99 preset scan groups
Transmit: 10.0 A max.
• Programmable by UPC database download, front panel, and manual frequen-
Frequency range: 29.7–400 MHz (AM)
29.7–960 MHz (FM) cy entry
Channeling: 12.5/20/25/30/50 kHz • Multiple radio-enhanced modes include cross-band relay, simultaneous
Tunability: 1.25 kHz steps multi-radio transmissions, and repeater
Options: 29.7–960 MHz Synthesized guard • Flexcomm CS upgrade provides 700 preset channels plus single mic opera-
30–50 MHz Single channel guard tion
137–174 MHz single channel guard
406–512 MHz single channel guard • P25 versions are equipped with software that enables 12-digit Alpha identi-
fier labels
RT-5000 P25:
136–174 MHz P25 module *These C-5000 variants are compatible with multiple other legacy transceivers
380–470 MHz P25 module including the RT-7200, RT-9600(F), RT-118, RT-450, RT- 30, RT-138(F), and RT-406F.
450–520 MHz P25 module
764–870 MHz
Encryption options: DES-XL, DES-OBF, DVP-XL, DVI-XL,
AES
Temperature range: -30°C to +60°C (-22°F to 140°F) Weight: 3.5 lb
Certification: FAA PMA/STC Power requirements: 27.5 VDC aircraft power (±20%)
Current requirements: 0.4–1.3 A
Panel lighting: 5 VDC / 5 VRMS and 28 VDC standard
Display options: Standard green or NVG Gen III compatible
EDMO# MFR# DESCRIPTION Temperature range: -22°F to 140°F
Call to configure an RT-5000 radio for your specific need. Multiple part numbers and
configurations available with serial and parallel RT connections, analog or P25 digital
communications, standard or NVG display, etc.
EDMO# MFR# DESCRIPTION
MOUNTS
RT-5000MT 300-316605-01 Vertical mounting tray Call to configure a C-5000 Control Head for your specific need. Multiple part numbers
and configurations available with serial and parallel RT connections, analog or P25 digital
RT-5000MTH 300-316835-01 Horiztonal mounting tray communications, standard or NVG display, etc.
044540-01 246-044540-01 Shock mount
13
SAL-2020 SAL-2020 Interface cable | Provides SAL-7000 interface to:
• Multiple scan modes XTS 5000, XTS 3500, XTS 3000, XTS 2500, XTS
1500, PR 1500 and MT 1500 radios
SAL-2030 SAL-2030 Interface cable | Provides SAL-7000 interface to:
XPR 7000, XPR 6300, XPR 6500, XPR 6000, APX
Weight: 3 lb 7000, APX 6000, APX 6000XE, APX 7000L, APX
7000XE, SRX 2200, APX 1000, APX 4000, APX
Dimensions: 8.64 x 5.75 x 1.88 in 8000XE, APX 8000, APX 3000
Input power: 28 VDC SAL-2040 SAL-2040 Interface cable | Provides SAL-7000 interface to:
Current: 0.5A, receive / 2.0A, transmit (typ.) EX 600, EX 500, EX 560-XLS, EX 600-XLS
0.8A, receive / 3.0A, transmit (max.) SAL-2050 SAL-2050 Interface cable | Provides SAL-7000 interface for
Frequency: 138–173.995 MHz HT1250
Audio output power: 100 mW @ 600Ω Bal/Unbal SAL-2060 SAL-2060 Interface cable | Provides 6-pin standard pinout to
connect to U-283/U
Tone capability: 38 standard CTCSS tones
SAL-2070 SAL-2070 Interface cable | Provides 5-pin standard pinout to
Remote interface: RS232C serial data connect to U-183/U
Altitude: 25,000 ft SAL-2080 SAL-2080 Cellphone interface cable | 4-conductor
Certification: TC STC #SA99-211 / TC STC #SH05-12 SAL-2080BT SAL-2080BT Cellphone Bluetooth interface
FAA STC #SA01170NY / FAA PMA
DO-160C Env. CAT [B4D1]ZBA[BMN]XXXXXXABA- SAL-50-24 SAL-50-24 Comm Cord | two straight cable, TJ-101 and
BAUAXXX MS3126F10-6P connectors
• Supports 15 radio audio inputs up to 9 transceivers and 6 receivers See edmo.com for the full list of available legends.
• Spatially separated audio
• Bluetooth 3.0 functionality for hands-free calling and music streaming EDMO# MFR# DESCRIPTION
• 5 direct audio inputs for external warning audio TITAN STAND-ALONE AUDIO CONTROLLER
• Tactical radio connectivity in the cabin for Air Law, Air Ambulance, Search & AMS80-001 AMS-80-001 White lighting | includes 15 legends
Rescue, Electronic News Gathering AMS80-002 AMS-80-002 NVIS lighting | includes 15 legends
• 2 power inputs: normal mode circuitry and powered backup mode TITAN AUDIO MANAGEMENT UNIT
• 3 CVR outputs: pilot, co-pilot, & one for users 3 & 4 AMU80-001 AMU-80-001 For helicopter applications
• 2 separate stereo music inputs AMU82-001 AMU-82-001 For fixed wing applications
• Single, programmable composite audio output for mission recordability TITAN AUDIO CONTROL PANELS FOR HELICOPTER
ACP83-001 ACP-83-001 White light | includes 15 legends
• Settings programmable via a USB connection
ACP83-002 ACP-83-002 NVIS lighting | includes 15 legends
• Spatially separated audio for improved clarity
TITAN AUDIO CONTROL PANELS FOR FIXED WING
• ICS tie-lines allow multiple systems to be tied together ACP84-001 ACP-84-001 White lighting | includes 15 legends
• 3 configurable talk groups ACP84-002 ACP-84-002 NVIS lighting | includes 15 legends
• 3 programmable aural warnings INSTALLATION KITS
149-074695 149-074695-01 For use with AMS80, AMU-80, AMU82
149-074696 149-074696-01 Titan ACP installation kit
Dimensions: 5 x 6.5 x 3 in.
Power: 27.5 VDC, 2.5A nominal
Analog ICS tielines: 2 bidirectional audio ports, 340 mVrms, impedance
2K Ω
13
uration and aural alert files (remotely) which allows the AMU50 to be replaced
ACP53 – TYPICALLY FOR COCKPIT CREW
as needed without the need to reconfigure the replacement unit.
ACP53-000 ACP53-000 Blue & white non-NVIS lighting | 5V/28V supported
• The DACS provides six direct (unswitched) audio inputs that are fixed gain
type, but can be adjusted using the configuration management software ACP53-001 ACP53-001 NVIS green “B” lighting | 5V/28V supported
(these inputs are configurable using the DACS configuration management ACP53-002 ACP53-002 NVIS green “A” lighting, 8TX/8RX | Requires 16 legends
software)
ACP53-003 ACP53-003 NVIS green “B” lighting, 8TX/8RX | Requires 16 legends
• DACS includes an integrated aural alert generator that provides eight tone/
voice warnings with multiple levels of priority (configuration software allows ACP53-600 ACP53-600 NVIS green “B” lighting, vertical | 5V/28V supported
the customer to load their own warning/alert messages as .wav files) INSTALLATION KIT
• The system configuration is defined and loaded using a computer and DACS ACP50-IKC ACP50-IKC ACP5X crimp kit
DevCS (device configuration software); this includes the number of radios,
number and type of users, headset impedances, number of ACPs, number
and type of user associated with each ACP, VOX control for the passengers,
input/output levels for the transceivers and receivers
EDMO# MFR# DESCRIPTION
AMU50 AUDIO MANAGEMENT UNIT
Weight: 1.01 lb max. (ACP51) AMU50-001 AMU50-001 Digital audio management unit
1.76 lb max (ACP53)
4.11 lb max. (AMU50) ACCESSORIES
0.09 lb max. (RM01) ERU50-001 ERU50-001 Emergency relay unit for DACS audio
Dimensions: 2.62 × 5.75 × 2.25 in (ACP51)
2.62 × 5.75 × 3 in (ACP53) AMU50-IKC AMU50-IKC AMU50-IKC crimp install kit
11 × 7.48 × 2.23 in (AMU50) ERU50-IKC -- Installation kit for ERU50
1.69 × 2.21 × 0.71 in (RM01)
Power: 27.5 VDC RM01 REMOTE MEMORY MODULE
2.5 A, nominal RM01-001 RM01-001 Remote memory module for DACS
Direct audio inputs: 6 inputs, fixed audio output levels
1 to 15 Vrms input range, 600Ω input impedance ACCESSORIES
MIC inputs: 7 inputs, 3 impedances selectable: RM01-IKC RM01-IKC RM01 crimp installation kit
5Ω (250 µVRMS), 75Ω (850 µVRMS) or 150Ω
Headset outputs: 7 outputs, 3 impedances available:
8Ω (250 mW), 150Ω (mW), 600Ω (250 mW)
Weight: 1 lb
Dimensions: 6.32 x 5.75 x 1.11 in
TSO compliance: DO-160C Env. Cat. B1-BA[MN]XXXXXXABBBBXXXXX EDMO# MFR# DESCRIPTION
AA20-431 AA20-431 Three-tone chime, mode select, PA/music, 30W
output into 8Ω, 80 mW max. into 600Ω, PA/ seatbelt,
no smoking keys-active low, message key-active high
13
EDMO# MFR# DESCRIPTION supports up to 8 headsets
AA21-400 AA21-400 Mode select, PA/music, 35 W max. output into 8 ohm,
AA22-110 AA22-110 Standard swept siren, adjustable rate/tone 6.5 VRMS max. into 600 ohm, PA key—active low;
Mode select switch PA110/PA220/PA250/PA700 outputs; radio input 2.5
PA/radio monitor >50 mW output into 150Ω VRMS into 1kΩ
6 VRMS nominal siren output into 600Ω
70 mA nominal current consumption INSTALLATION KIT
PA and siren override at all times AA20-IKC D25SL-IKC Crimp kit installation kit
+28 VDC switched power output
Use with PA110 and PA220 series amplifiers EDI-20C -- Crimp installation kit
AA22-160 AA22-160 Wail/yelp swept siren, adjustable rate/tone D25SV-IKC D25SV-IKC Crimp install kit for use with AA21-400
Mode select switch, PA/Radio monitor
6 VRMS nominal audio output into 600Ω
6 VRMS nominal siren output into 600Ω
70 mA nominal current consumption
+28 VDC switched power output
Use with PA110 and PA220 series amplifiers
Can be selected as a radio with keyline serving as siren PA-SERIES POWER AMPLIFIERS
key ANODYNE ELECTRONICS MFG CORP
AA22-163 AA22-163 Same as AA22-160, with locking PA/RADIO select
switch
PA110
AA22-492 AA22-492 PA siren controller for PA250/700
Wail/yelp swept siren, adjustable rate/tone The PA110 high power audio amplifiers
Mode select switch, PA/radio monitor are designed for use with the AA22 series
500 mVRMS nominal audio output into 600Ω 450
mVRMS nominal siren output into 600Ω Siren override PA controllers and are remote-mounted
at all times modular amplifiers capable of producing
70 mA nominal current consumption 110 watts of output power.
Used with PA250 and PA700-series amplifiers Can be
selected as a radio with keyline serving as siren key • Interconnects, switches and relay
AA22-493 AA22-493 PA siren controller for PA250/700 contacts are gold plated for maximum
Wail/yelp swept siren, adjustable rate/tone reliability
Mode select switch
100 mVRMS nominal audio output into 600Ω 90 mVRMS • G10-FR flame retardant circuit boards are post-coated for maxi- mum mois-
nominal siren output into 600Ω Siren override at all ture resistance and corrosion prevention
times
80 mA nominal current consumption • Relays are sealed, high vibration rated and dry nitrogen filled
Used with PA250 and PA700 series amplifiers Can be • Weight: 4.6 lb
selected as a radio with keyline serving as siren key
• Dimensions: 6.32 x 7.6 x 4.1
INSTALLATION KIT
EDI-20C -- Crimp installation kit for AA20/AA22 PA siren systems
*continued on next page
PA250
The PA250-series amplifiers are designed LSA LOUD SPEAKER AMPLIFIERS
for use with AA22 series PA control- ANODYNE ELECTRONICS MFG CORP
lers and are capable of supplying 250
watts output power. (400 watts with the The Next Generation Loud Speaker
VR33-001 power converter). This unit is Amplifier (LSA) from AEM is a compact,
completely transistorized and constructed lightweight, Class D amplifier that pro-
with a rugged, black anodized aluminum vides excellent sound quality and output
chassis. while using much less power compared
to previous versions. The unit’s “smart
• Contains protective circuits that pro- power supply” modifies the amplifier
tect the amplifier from reverse polarity, output to meet the output load demand.
excessive current and voltage, and internal or external short circuits Output power ranges from 150 Watts to
• Weight: 6.75 lb 1760 Watts depending on the size of the
• Dimensions: 10 x 8.75 x 4.26 in system.
• Equipped with four audio inputs includ- LSA150-001
EDMO# MFR# DESCRIPTION COMPATIBLE ing one microphone, two single-ended
LOUDSPEAKERS inputs, and one differential audio input; each input has a field adjustable
PA110-015 PA110-015 100-watt systems TS100WR
gain level to optimize speaker output power for various input signal levels
PA220-010 PA220-010 200-watt systems TS200WR • Amplifier status annunciators for the protection circuits and user-accessible
PA250-001 PA250-001 250 / 400 watt systems TS92-02xN audio input adjustments are displayed externally near the D-sub connectors
INSTALLATION KITS
PA110-IKS D25SL-IKS PA110 solder installation kit
EDMO# MFR# DESCRIPTION
PA220-IKS D37SL-IKS PA220 solder installation kit LOUD SPEAKER AMPLIFIERS
EDI-110C -- Crimp installation kit for PA110 LSA100-100 LSA100-100 6x20-watt output cabin speaker amplifier
13
EDI-220C -- Crimp installation kit for PA220 LSA150-001 LSA150-001 150-watt loud speaker amplifier
LSA300-001 LSA300-001 300-watt loud speaker amplifier
LSA400-001 LSA400-001 600-watt loud speaker amplifier
LSA800-001 LSA800-001 1200-watt loud speaker amplifier
INSTALLATION KITS
LSC22 SERIES LOUD SPEAKER / SIREN LSA100-IKC LSA100-IKC Installation kit | LSA100-100
CONTROLLER LSA400-IKC LSA400-IKC Crimp installation kit | LSA400 series
ANODYNE ELECTRONICS MFG CORP LSA400-IKS LSA400-IKS Solder installtion kit | LSA400 series
The LSC22 Series Loud Speaker/Siren
Controllers surpass the capabilities of
preceding models of siren controllers
by providing an enhanced degree of LSC22-001
centralized control over an aircraft’s LS SERIES LOUD SPEAKERS
internal and external loud speaker systems. It is compatible with AEM’s LSA ANODYNE ELECTRONICS MFG CORP
series loud speaker amplifiers and legacy AEM PA equipment.
AEM’s LS Series loud speakers are
The LSC22 provides on-board digital storage for recording up to three messag- high output power, 300 and 600-watt
es that can be broadcast through the loudspeaker system. A front panel AUX loud speakers for use in air-to-ground,
input allows the user to broadcast recorded messages from an MP3 player or air-to-sea or ground- to-ground audible
smart phone. These two features allow for broadcasting voice only—eliminating communication systems. These speakers
cockpit noise inherent in live microphone broadcasting. are intended for use with the LSA400 or
• Optional NVG lighting available LSA800 series power amplifiers.
• Available in a single, double, or triple
bell configuration
Weight: 1.1 lb • Updated speaker drivers provide better
Dimensions: 6.32 x 5.77 x 1.11 in conversion of electrical power (watts)
Certification: Environmental Qualification: DO-160G to sound pressure (SPL)
Performance Spec: DO-214 LS300-200
• Field replaceable driver assembly and
mechanical parts
• Available in 300 and 600-watt versions
• Improved mechanical design and updated speaker drivers
13
MFR# LS150-001 ANODYNE ELECTRONICS MFG CORP
The LS150 is a powerful cabin speaker
designed for high-noise environments. LSS220
When combined with the LSA800 loud-
speaker amplifier four or six LS150-001
Cabin Speakers can be combined to
help meet the operational requirements
of cabin PA systems in extreme-noise
environments. Simple interface with the
aircraft’s existing audio and communi-
cation system allows the cockpit and
cabin crew members to efficiently and
effectively broadcast messages to the
passengers. The LS150 Cabin Speaker
works with LSA400 and LSA800 amplifiers to create systems with peak audio
output power levels from 600-1800W. Components: LSC22 Series PA Controller, LSA150 Series Loud Speaker Amplifi-
• 150W power handling capacity er, and TS150 Series Speaker
• DO-160G and MIL-STD qualified • Front-mount auxiliary input on the LSC22 allows message transmission from
an MP3 player or smartphone
• Water resistant cone
• Convenient onboard digital storage for fast recording and playback
• In/out wiring interface for easy system configuration
• Optimized audio signal with less DC power demand than its predecessor
• Compatible with LSA400 and LSA800 amplifiers
• Applicable for both internal and external aircraft applications
Weight 4.1 lb
Dimensions 3.5 x 7 x 9 in Weight: 1.3 lb (LSC22)
3.7 lb max (LSA150)
5.5 lb (TS150)
Dimensions: 1.11 x 5.74 x 6.32 in (LSC22)
5.45 x 2.04 x 9.8 in (LSA150)
Input power / frequency: 150W RMS / 275–8000 Hz (TS150)
Certification: DO-160G qualified
LSS440
LSS1320
Components: LSC22 Series PA Controller, LSA400 Loudspeaker Amplifier, and Components: LSC22 Series PA Controller, LSA800 Loudspeaker Amplifier, and
LS300 Series Loudspeaker (1) LS300 and LS600 Series Loudspeakers
• Front-mount auxiliary input allows message transmission from smartphones • Front-mount auxiliary input allows message transmission from an MP3
• Convenient onboard digital storage for fast recording and playback player or smartphone
• Processes and optimizes the audio signal for the best audio output • Convenient onboard digital storage for fast recording and playback
• Over 400W of effective, peak audio output power • Processes and optimizes the audio signal for the best audio output
• Optional NVIS compatible lighting • 1320W+ of effective, peak audio output power
• Optional NVIS-compatible lighting
Diameter: 4.5 in
Power rating: 100W
Impedance: 8Ω
Color: Black
Components: LSC22 Series PA Controller, LSA800 Loudspeaker Amplifier, and
(2) LS600 Series Loudspeakers
• Front-mount auxiliary input allows message transmission from smartphones
• Convenient onboard digital storage for fast recording and playback
• Processes and optimizes the audio signal for the best audio output SPC-8 WEATHERPROOF PA SPEAKER
• 1760W+ of effective, peak audio output power SPECO
• Optional NVIS-compatible lighting EDMO# SPC-8
MFR# SPESPC8
The SPC-8 is a 5 inch aluminum weatherproof PA
speaker. It offers a frequency response of 300
Weight: 1.3 lb (LSC22) to 15 kHz and a 15 watt maximum power rating.
6.3 lb max (LSA800)
28 lb each (LS600) It features a sensitivity of 105 dB with an imped-
Dimensions: 1.11 x 5.74 x 6.32 in (LSC22) ance of 8 ohm. A mounting bracket is included.
5.51 x 3.74 x 9.86 in (LSA800)
10.3 x 13.2 x 12.8 in (LS600)
Certification: DO-160G & DO-214
13
Dimensions 5 in diameter & length
Frequency Response: 300-15,000 Hz.
VR33 SERIES DC POWER CONVERTER Sensitivity: 105db/1w/1m
ANODYNE ELECTRONICS MFG CORP Power Rating: 15 watts max.
The VR33 series DC power converters Impedance: 8 Ohm.
increase the nominal 28 VDC aircraft
voltage to 33 VDC using high speed
switching DC-DC conversion. The VR33
can be paired with either the AEM PA250-
or PA700- series high power amplifiers to
improve the audible range of the specified
TACTICAL SOLUTIONS,
speaker system.
• The VR33-001 is paired with the PA250-xxx audio power amplifier to boost
its output power from 250 to 400 watts NO MATTER THE AIRCRAFT.
• The VR33-002 is equipped with two outputs so that it can be used with the
PA700-xxx audio power amplifier; in this configuration, it boosts the output EDMO HAS YOU COVERED
power of the PA700-xxx from 700 to 850 watts
The changing nature of airspace communications demands
equipment that keeps pace with the times. EDMO helps their
Weight: 2.7 lb customers stay at the technological forefront by supplying the
Dimensions: 10 x 8.75 x 1.56 in (max.) best in VHF radios, tactical communications equipment, audio
Input: Power: 140 watt panels and controllers.
Voltage: 21–32 VDC / 28 VDC (nominal)
Current: 15 ADC, full load If you don’t see what you need here, it’s likely we have it, or can
Certification: DO-160C, Env. Cat. B4-XXNXXXXXXXXXXXXXXXX order it in for you. You can also check out the newly improved
edmo.com. With thousands of parts a click away, EDMO has you
covered. And as always, our friendly customer service and sales
EDMO# MFR# DESCRIPTION staff is here for you. Call us at 1.800.235.3300.
VR33-001 VR33-001 Power converter | PA250 to 400W
VR33-002 VR33-002 Power converter | PA700 to 850W
• Two direct inputs accommodate functions including Rad Alt, GPS Alerts, • Can be customized for any configuration with snap-in legends that are easy
Low Rotor, or Telephone ringer to order and install
• Emergency mode switch on the front panel switches the pilot headphones • Lighted faceplate – NVIS green compliant
directly to the selected radios while mic control is maintained using the • Boom mic support for pilot and copilot with ICS and XMIT functions via
transmit select switch for each available radio cyclic or yoke switching
• Models AMS43, AA95 and AA97 provide three internal alert tone generators: • Provides the clearest possible ICS audio performance with dynamic noise
single-tone, two-tone, and timed swept tone reduction and active filtering
• ICS tie line for multiple controller installations
• Sealed switches and relays — the relays are dry nitrogen-filled units rated for
Weight: 2 lb shock and high vibration (50g)
Dimensions: 6.75 x 5.75 x 1.88 in
Power: 22–32 VDC (max. 600 mA/5 VDC)
Altitude: 25,000 ft (max.)
Weight: 2 lb
Temperature range: Operating: -20°C to 55°C
Storage: -40°C to 85°C Dimensions: 8.07 x 5.75 x 1.88 in
Power: 0.25 A / 28 VDC
Lighting: 27.5 VDC @ 160 mA
Altitude: 25,000 ft
EDMO# MFR# DESCRIPTION Temperature range: Operating: -20°C to 70°C
SINGLE CHANNEL OPTIONS Certification: TSO-C50C, RTCA DO-16A, DO-160C & DO-170 qualified
AA95-728 AA95-728 AA95 | 5 transceivers, 6 receive, and alerts
AA95-729 AA95-729 AA95 EMS crew | 5 transceivers, 3 receive
AMS43 AMS43 AMS43 audio controller 55-08-XXX SNAP-IN LEGEND CAPS FOR AA95-1000
AMS43H AMS43H AMS43 | AUX front panel text changed to HF
AUX COM1 COM2 COM3
AMS43N AMS43N AMS43 | NVG
DME DNLINK FM1 FM2
AMS43TSO AMS43 TSO AMS43 | TSO-C50c
FM3 FM4 MKR MUSC
SINGLE CHANNEL OPTIONS – *CUSTOM NAV1 NAV2 PAT SAT
AA95-xxx AA95-xxx Legacy AA95 parts | custom TSO
See edmo.com for the full list of available legends.
AA96-xxx AA96-xxx Legacy AA96 parts | custom
AA97-xxx AA97-xxx Legacy AA97 parts | custom
DUAL CHANNEL OPTIONS EDMO# MFR# INCLUDED LEGENDS
AMS42 AMS42 AMS42 | 4 coms & PA LEGEND KITS
13
AMS42F AMS42F AMS42 Forest Service | 4 coms & PA AA95LK-001 AA95LK-001 BLANK (2 ea.), AD/DM, CALL, COM1, COM2, FM1, FM2,
AMS42U AMS42U AMS42 US Forest Service | 5 coms & PA FM3, FM4, MKR, NAV1, NAV2 (1 ea.)
AMS44 AMS44 AMS44 audio controller | 5 coms & PA AA95LK-002 AA95LK-002 BLANK (2 ea.), ADF, CALL, COM1, COM2, DPLR, FM1,
FM2, FM3, FM4, PAT, PIL ISO (1 ea.)
AMS44N AMS44N AMS44 | NVG compatible
AA95LK-003 AA95LK-003 BLANK (4 ea.), 800, CALL, COM1, COM2, NAV1, NAV2,
AMS44NB AMS44NB AMS44 | NVIS B SAT, UHF, VHF (1 ea.)
INSTALL KITS AA95LK-004 AA95LK-004 BLANK (3 ea.), 800, CALL, COM1, COM2, DPLR, PAT,
AA90-IKC D50S37SL-IKC AA90 AMS crimp install kit PIL ISO, SAT, UHF, VHF (1 ea.)
AA90T-IKC AA90T-IKC AA9X AMS4X mounting tray kit
EDI-90C -- AA9X AMS4X crimp install kit
*Customers may still order legacy versions of the AA94, 95, 96, 97 and components,
including custom versions that can be designed to spec
AA24/25 SINGLE USER AUDIO CONTROLLERS
CANYON AEROCONNECT
The AA24 and AA25 single user audio
AA95-1000 MULTI-USER AUDIO CONTROLLER controllers provide dedicated individual
CANYON AEROCONNECT control panels for each user in larger,
The AA95-1000TSO multi-user audio con- multi-station installations. These units
troller is based on the technology of its are equipped with interchangeable
predecessors, the AA95 and AMS43 audio connector mapping and multi-station
controllers (see following parts) and is junction boxes that make it possible to
intended for use in a variety of fixed- and quickly install large audio systems. AA24-001
rotary-wing aircraft cockpit panels. The • Accommodates up to four trans-
advantage of the AA95-1000 over previous ceivers: a PA position, five switched NAV inputs and a dedicated alerting
generations is a customizable faceplate input and are designed with fully floating inputs to prevent ground-loop and
design that can be fitted with snap-in legends to accommodate any mission. common mode noise
Like previous models, this version provides full transmit (TX), receive (RX) and • Panel controls include independent VOX, ICS level and radio level adjust-
intercom (ICS) functionality for the pilot and copilot— this includes control of ments and a two-color TX/ICS annunciator
six transceiver positions, six receiver inputs, and one PA output. Additionally,
passengers can control RX and ICS functions. The AA95-1000 can be mounted • ICS features ICS tie line and ANF noise reduction system
using Dzus or quarter-turn fastening rail systems. • May be specified for either high or low impedance headsets or helmets and
• Provides an independent control for each audio channel that allows side can be custom-configured to meet mission requirements
tone, ICS audio, and RX audio • Integral intercom provides headphone output of 200 mW
*continued on next page
Weight: 1.2 lb
Dimensions: 5.58 x 5.75 x 1.12 in
Power: 11–30 VDC, operating range EDMO# MFR# DESCRIPTION
30.3 VDC (max.) / 11.0 VDC (min.) N301A-000 N301A-000 N301A single-user audio controller
EDMO# MFR# DESCRIPTION lights amber to indicate that any of the ICS functions are in the isolated
position
N301A-200 N301A-200 N301A | standard lighting - Hi-Z
• Equipped with four annunciator outputs, one for each ICS function
N301A-201 N301A-201 N301A | NVIS green B backlight - Hi-Z
N301A-301 N301A-301 N301A | NVIS green B backlight - dual impedance
• Provides load matching so that the ICS levels do not change as the ICS
function is changed; when the AA31 isolates an audio control- ler’s ICS tie
INSTALL KITS line, it connects a resistor, equal to the load of the ICS tie line, in place of the
D50S15SL-C D50S15SL-IKC N301/N301A crimp install kit isolated audio controller
• Rear Call annunciators illuminate when a rear call signal is activated ICS
function switching is a passive circuit, so it continues to operate without
power (annunciators and outputs fail without power)
13
AA31-IKC D25SL-IKC Crimp installation kit
*additional AA31-XXX custom dash numbers have been defined and are available upon
request.
Weight: 2.2 lb
Dimensions: 2.25 x 5.75 x 5 in
Certification: TSO-C139
DO-214
DO-160E
AA30 EXPANSION SWITCH PANEL
CANYON AEROCONNECT
The AA30 expansion units are
compact, Dzus-mounting switch
EDMO# MFR# DESCRIPTION expansion units that support up to
four transceivers with individual
344-001 344-001 344 audio control panel | selector panel AA30-310
receive volume control (depending
344-002 344-002 344 audio control panel
on variation of AA30).
Weight: 1.05 lb
A31 ICS MODE CONTROLLER Dimensions: 6.20 x 5.75 x 2.5 in
CANYON AEROCONNECT Power: 0.25 A / 28 VDC
AMPLIFIERS AA36-100
AA36-ECF
AA36-100
AA36-ECF
AA36-100 ICS tie line adapter
AA36-ECF NAT ICS tie line to non-directional tie line
interface
INSTALLATION KIT
AA36 DIGITAL ICS TIE LINE ADAPTER AA36100IKC D15SM-IKC Crimp installation kit for AA36-100
CANYON AEROCONNECT
The AA36-100 ICS tie line adapter
provides an interface between AEM
audio products with an ICS tie line or
SuperNAT tie line and other proprietary AA35 AUDIO MIXER PANEL
bi-directional and uni-directional ICS CANYON AEROCONNECT
tie lines. This is especially useful when
integrating AEM products with an ex- The AA35 audio panel mixer is a six-
isting system. The following functions or 12- channel summing amplifier
may be adjusted by the user. AA36-100 with independent level control for
each input and can be used as an
• Universal microphone output levels (not impedances) expansion panel for existing audio
• Universal bi-directional ICS tie line output levels and impedances controllers.
• Attenuation of the analog audio signal arriving on the universal ICS tie line or
AA35-001
microphone input
• Attenuation of the analog audio signal arriving on the NAT ICS tie line
• Output level of the NAT bi-directional ICS tie line
• Universal bi-directional tie line can be configured to one of four possible Weight: 1.1 lb
proprietary tie lines Dimensions: 5.68 x 5.75 x 1.12 in
4.78 inch depth behind the panel
4.9 inch width behind the panel
Input power: 27.5 VDC (nominal)
Weight: 0.6 lb Input current: 275 mA (nominal)
Dimensions: 4.59 x 4.54 x 1.4 in Output: 7.7 VRMS or 100 mW into 600Ω
Power: 0.3 A / 28 VDC 1.3 VRMS or 200 mW into 8Ω
Input/output: dB systems: 400 mVrms into 430Ω Mounting: Dzus rail
Gemelli: 400 mVrms into 150Ω Altitude: 35,000 ft (max.)
Telephonics: 400 mVrms into 150Ω
13
Andrea: 2.8 mVrms into 600Ω Temperature range: Operating: -45°C to 70°C
Honeywell: 7.7 mVrms into 600Ω Survival: -55°C to 85°C
Material/finish: Chassis and cover are 5052-H32 brushed aluminum with
conversion coating finish
AA36-ECF INTERFACE
The AA36-ECF interfaces with a NAT ICS tie line to non-directional tie line EDMO# MFR# DESCRIPTION
intercom systems. This unit is a remote bulkhead mount unit. The input signal AA35-001 AA35-001 Panel mount AA35 base model | Provides signal
is adjustable to allow correct NAT ICS tie output levels, and an input switch combinations of up to six in–six out or six in–one
provides selection to different tie line load impedances. An external switch can composite out
be added to allow the pilot to mute PAX conference function. AA35-007N AA35-007N Custom audio mixer panel with 28 VDC | NVG friendly lights
AA35-100 AA35-100 Remote mount AA35 model | Provides signal
combinations of up to six in–six out or six in–one
composite out
Weight: 0.41 lb AA35-201 AA35-201 Summing isolation amp | 12 Channel, NVIS green
Dimensions: 1.25 x 2.48 x 4.5 in AA35-201W AA35-201W Panel mount AA35 potentiometer panel | Provides
ICS output: Rated Level: 500 mVrms into 5 kHz signal combinations of up to 12 in–12 out or 12 in–one
Freq. response: <3 dB from 350–6000 Hz composite out
Distortion: <10% @ rated output AA35-400 AA35-400 Remote mount AA35 for TAWS applications | Provides
Noise Level: >60 dB down from rated output (without signal combinations or up to three in–three out or three
signal) in–one composite out
Isolation from ICS Input: >35 dB
Adjust Trimpot: 40 dB of range INSTALLATION KITS
AEM ICS signals (bi- Signal Level: 340 mVrms AA35-IKC D37SV-IKC Crimp Installation kit for AA35 | Includes: (1 ea.) D-min 37
directional): Input impedance: 1800Ω ±10% Socket Housing, (37 ea.) MS Crimp Socket, (1 ea.) 37 Pin
Output Impedance: 600Ω JVL Hood/Locklever
Freq. response: <3 dB from 350–6000 Hz AA35-IKC-1 D37SV-IKC Crimp Installation kit for AA35, AA38-50x/60x/70x,
Distortion: <10% @ rated output AA39-x87 (Alt. part No.: D37SV-IKC)
Altitude: 35,000 ft D37PV-IKC D37PV-IKC 37-pin D-miniature male crimp install kit
Temperature range: Operating: -20°C to 55°C D37SL-IKC D37SL-IKC 37-pin D-miniature female crimp install kit
Survival: -55°C to 85°C
D37SV-IKC D37SV-IKC 37-pin D-miniature female crimp install kit
Certification: DO-160E
13
booster driver. This amplifier will drive any speaker load from 3.2Ω to 16Ω but
CANYON AEROCONNECT provides optimum energy transfer into either four or six 8Ω loads.
The Model 247 is a multipurpose
audio mixing amplifier for mixing aural
warning, cockpit voice recorder, or any Weight: 0.78 lb
other aircraft audio signals. Each input is Dimensions: 1.73 x 5.20 x 3.95 in
adjustable to accept 0.25 VRMS micro-
Input power: 22–32 VDC
phone input signals, headphone audio
signals from standard audio systems, Supply current: 600Ω: 1.0A max. (at full output into 3.2Ω)
H/S input: 7.70 VRMS (20 dBm) @ 1 kHz
or receiver audio signal up to 50 mW. Mic input: 0.25 VRMS @ 1 kHz
The outputs are designed to drive any Output Levels: 3.2Ω load, 9.0 WRMS @ 1 kHz with <0.6% distortion
impedance from 8 to 10K. Additional 4.0Ω load, 7.5 WRMS @ 1 kHz with <0.6% distortion
inputs can be added by connecting 8.0Ω load, 4.5 WRMS @ 1 kHz with <0.5% distortion
one of the outputs to feed an input of 16Ω load, 2.5 WRMS @ 1 kHz with <0.3% distortion
Input Logic, Key inputs are active LOW (GND = Muted)
another mixer. Output Logic, Key outputs are diode isolated
• Designed for driving non-DC biased (ground referenced) loads Shock: 12g (any axis)
• Contains 3 independent audio mixing circuits that have four input channels Altitude: 15,000 ft
and one output channel each Temperature range: -20°C to 65°C
• Adjustable inputs accept microphone signals, headphone audio signals, or Mounting: 4 x 10-32 mounting bolt/screw
receiver audio signals
• TSO-C50c, RTCA/DO-214, RTCA/DO-160C approved
EDMO# MFR# DESCRIPTION
AA23-001 AA23-001 AA23 cabin PA/music speaker amplifier
Weight: 0.42 lb (max.)
AA23-002 AA23-002 AA23 dual speaker amplifier
Dimensions: 1.63 x 3.03 x 4.03 in (max.) including flanges
INSTALLATION KITS
Distortion: <1% THD+N
EDI-23C -- Crimp installation kit for AA23
Gain range: >12 dB
D15SL-IKC D15SL-IKC Crimp installation kit for AA23, VR28, AC100,
Output: 4.5 VRMS (33 mW) into 600Ω, current limited AC200, IC260
Mic. bias: 18 VDC @ 30 mA individually selectable
Frequency response: Flat within ±3 dB from 300 to 6,000 Hz
Altitude: -15,000 ft to 70,000 ft
MODEL 245
The Model 245 speaker amplifier is
designed to be interchangeable in form, MODEL 240
fit, and function with the Collins Avionics The Model 240 passenger speaker
Model 365F-3 speaker amplifier. This PA amplifier is a remote-controlled unit that
amplifier provides 18 watts of output pow- is operated from switches and potenti-
er with less than 1% distortion. The Model ometers located in the cockpit or cabin of
245 is an excellent choice for cabin or the aircraft. This unit receives audio from
cockpit applications to replace an existing various sources to send to speakers locat-
Collins unit or for new installations. It is a ed in the cabin. The Model 240 provides
suitable solution for cabin paging, cockpit stereo music to the cabin from external
speaker, and music applications. music sources. This passenger audio
• Accepts differential and single ended inputs amplifier also provides fasten seat belt
• Over-temperature and over-current protection and no smoking chime tones, cabin call
ring tone, ADF, pilot selection Com (PSC), TV, Briefer and cabin paging audio to
• Certified to TSO-C50c the cabin speakers.
13
NAT270 270 Universal interface amplifer AREA MICROPHONE PREAMPLIFIER
INSTALLATION KIT CANYON AEROCONNECT
D25SM-IKC D25SM-IKC Installation kit EDMO# 265-002
MFR# 265-002
The Model 265 Area Microphone
Preamplifier is designed to detect and
amplify acoustic cockpit signals for
INTERPHONE AMPLIFIER routing to cockpit voice records. The
model 265-002 is designed to include
CANYON AEROCONNECT an internally mounting microphone for
EDMO# NAT204 receiving acoustic input signals at the
MFR# 204 microphone opening located at the front
The Model 204 interphone amplifier of the enclosure.
is a three-station mixing/ICS amplifier
with DC-biased microphone inputs
and 100 mW into 150Ω outputs with
no VOX. The 240 is a lightweight and Amplifier gain: 16 dB to 36 dB (adjustable)
compact amplifier that is versatile Output level: 1.0 VRMS into 600Ω when acoustic input level is 94 dB
and provides low-level microphone in- SPL above 20 µPascals
puts, and audio to all flight interphone Amplifier frequency response: Flat within 3 dB from 100–10,000 Hz
stations. Acoustic frequency response: Flat within 3 dB from 150–8,000 Hz
Amplifier distortion: Less than 1% THD+N
Acoustic distortion: Less than 5% THD+N
Weight: 0.35 lb Microphone output: 1.0 VRMS into 600Ω (nominal)
2.0 VRMS into 600Ω (max.)
Dimensions: 1.6 x 3 x 2.5 in
Power supply: 28 VDC @ 30 mA
Power: 0.15 A max. @ 28 VDC
Altitude: Up to 55,000 ft
Certification: FAA certified under Type certificate (TC)
Temperature range: -55°C to 70°C
Certification: FAR Part 21, TSO-C139, TSO-C123b, Eurocae ED112,
RTCA DO-214 & RTCA DO-160E
AUDIO ALERTS & AURAL • Provides up to 96 alerts using 24 alert trigger discretes (inputs); each alert
trigger can be prioritized and can activate up to four alerts including voice,
WARNING GENERATORS tone, and combination (with the option to customize and prioritize alerts or
advisory messages for the pilot and copilot)
• Users have access to pause, cancel, and alert test features as well as the
ability to mute chimes, briefing messages, and background
AA37 ALERTING SYSTEMS
• Uses standard Microsoft Windows audio alert.WAV files so that the installer
CANYON AEROCONNECT
can create and upload their own files if desired
AA37 Alerting Systems are compact,
• The 630 is configured using a standard USB or RS-232/RS-422 interface, PC
remote mounted units that provide
configuration tool, and audio storage and playback unit configuration
two- or three-level alerting. All outputs
are fully isolated to accommodate • Password protection feature ensures that operators cannot alter installation
installation in dual audio controller configurations
systems. Trigger inputs can be active • Installer programmable alert volume levels
low or active high depending on the
• Compatible with the original model 630 for retrofit purposes – Approved to
model—this allows for straightforward
TSO-C139 requirements
interfacing with common aircraft sys- AA37-212
tems. The tone and rate of the alerts • Includes CD with 630A series Install/Ops manual and new AS- PU-CS config-
can be tailored to ensure that they don’t interfere with existing airframe warning uration software and manual
functions.
Weight: 1.15 lb
Dimensions: 4.96 x 7.81 x 1.68 in
Weight: 0.51 lb (max.) Noise: Less than -50 dB (-70 dB typical)
Dimensions: 4.4 x 4.5 x 1.25 in Total harmonic distortion Less than 3% (1% typical)
Input power: 27.5 VDC @ 200 mA (nominal) (THD+N):
Altitude: 25,000 ft Frequency response: Flat within 3 dB from 300 Hz to 15 kHz
Temperature range: Operating: -20°C to 55°C Playback messages (audio Flat within 3dB from 300 Hz to 15 kHz
Survival: -55°C to 85°C outputs):
Crosstalk: -80 dB, typical
Altitude: -15,000 to 55,000 ft
Temperature range: -55°C to 70°C
EDMO# MFR# DESCRIPTION Certification: TSO-C50c
AA37-001 AA37-001 Dual channel, 2 level alerting. Meets the performance requirements of RTCA DO-214
while testing to the environmental conditions of RTCA
13
AIRBORNE TELEPHONE
ADAPTERS EDMO#
PTA12-100
MFR#
PTA12-100
DESCRIPTION
Telephone adaptor with display
PTA12-104 PTA12-104 Telephone adaptor | Gray
PTA12-300 PTA12-300 Telephone adaptor | NVIS display
PTA12 POTS AIRBORNE TELEPHONE ADAPTER
INSTALLATION KIT
CANYON AEROCONNECT
KT004 KT004 Installation kit | Includes DB-25 connecter kit,
The PTA12-series units are backshell, and pins
Dzus-mounted, keypad-based
control units for use with
13
airborne telephone system
applications. These units
connect to a telephone
system transceiver via a
two-wire plain old telephone PTA12-100
service (POTS) interface. PTA12-series units can be connected directly to an
aviation headset or to the aircraft audio controller(s). The PTA12 units are
available in a variety of configurations.
UNIVERSAL FEATURES:
• The speech circuits include a mic input amplifier and a phones output ampli-
fier with front panel volume control
• HOOK-switch control and indication is provided on the front panel
• Ring indication is also provided on the front panel with a flashing green LED
• FLASH key is provided on the front panel for use with call transfer and call
waiting
• HOLD key on the front panel mutes all audio to and from the headset
• REDIAL key on the front panel automatically redials the last number entered
• Interfaces with the airborne telephone system transceiver using a two-wire
POTS port
• Illuminated keypad
Here at EDMO, we pride ourselves on our ability to maintain
PTA12-000 BASE UNIT
a massive inventory of tactical communications systems,
The PTA12-000 provides ring detect, ringer audio generate, DTMF tone genera-
tion, speech audio circuits, hook-switch, and flash. with the intent to provide all of the necessary components
• The PTA12-100 provides speech audio circuits, hook switch, ring indication,
that a customer could ask for.
flash, hold redial, serial data communications, backlighting, display, speed
dial, Globalstar™ Interfaces with the airborne telephone system transceiver
Give us a call at 1.800.235.3300 or visit edmo.com for
satcom status, DTMF tone generation and ringer audio generate. more info.
• Includes serial port for data communications to sitcom systems
• LED dot matrix character display with brightness control
ACCESSORIES RTS01-001
RTS01-001N
RTS01-001
RTS01-001N
RTS-01 / standard lighting*
RTS-01 / NVIS lighting*
INSTALLATION KIT
D44S44PV D44S44PV-IKC Installation kit for RTS01 units
REMOTE TRANSMIT SELECTOR PANEL
*Snap-in legends are not included and must be ordered separately (7 legends required).
ANODYNE ELECTRONICS MFG CORP Legend part numbers 155-06-xxxx (see table below)
The RTS01 remote transit
selector adds capabilities
and functions to any existing RTS01 LEGEND CAPS
analog audio system to Blank ADF AUX ADF1 ADF2
offer operators the benefits AUX1 AUX2 BLUT COM1 COM2
of remote transmit section COM3 COM4 DME DME1 DME2
(RTS), RX Activity Indication, RTS01-001
DPLR FM1 FM2 FM3 FM4
and audio system expansion.
Installation is designed to be simple with little to no impact on existing audio GSM HF MKR MUSC NAV
system wiring. The use of an external toggle switch allows pilots and operators NAV1 NAV2 OFF PA SAT
to select a transceiver without the need to reach for the audio panel during TAC1 TAC2 TAC3 TAC4 TACN
busy flight operations so that full attention remains on critical aircraft controls TEL UHF VHF1 VHF2 WICS
and operations. The RX Active feature allows pilots and operators to monitor
See edmo.com for the full list of available legends.
which transceiver is currently active so that they can determine which radio
they are actually listening to at any one time; the RX annunciator illuminates
to show which transceiver is currently active regardless of which audio input
is selected. The RTS expansion capability allows additional transceivers to be
added to the communications system without having to remove and replace the DIGITAL SWITCH PANEL
entire audio system. Snap-in legends provide the ability to customize the label CANYON AEROCONNECT
on each transceiver channel. Snap-in legends are required for operation but not EDMO# 802-009
included with the RST01 unit. MFR# 802-009
• An external toggle switch connected to the flight controls provides hands- The 802-009 Digital Switch Panel
free selection of transceiver channels is designed to control a single
Model 700-xxx Digital Audio Control
• RX ACTIVE detection feature illuminates an RX annunciator to indicate which
Amplifier. This switch panel provides
transceiver is currently receiving audio signal
microphone audio switching and
• The RTS01 may be incorporated as expansion panel with support for up to 7 keying operation and keying operation
transceivers
13
13
keyed ICS for 4 users with low impedance headsets
• AA38-8xx series local ICS loops provide an external ICS volume control, and
DIGITAL AUDIO AMPLIFIER live, VOX or keyed ICS for 8 users with high impedance headsets
CANYON AEROCONNECT • AA38-503, AA38-603, and AA38-703 models have prioritized transmit capa-
The Model 700 Digital Audio Amplifier bilities for all users with priority given to user #1 and lowest to user #4
pairs with Model 800 Series Digital Audio
Controllers which are commonly used in
corporate and special mission fixed-wing
aircraft like the Beechcraft King Air. The Weight: 0.55 lb (AA38-300)
0.96 lb (AA38-301)
combination of these units provides 1.01 lb (AA38-380, -381)
microphone audio switching and keying operations for radio transmitters, 1.14 lb (AA38-501, -504)
receivers, and passenger address amplifier control. 2 lb (AA38-502)
0.80 lb (AA38-601)
• 15 receiver/transceiver inputs that can be used along with six dedicated 1.37 lb (AA38-602)
audio sidetone inputs 1.20 lb (AA38-603)
1.44 lb (AA38-802)
• 4 unswitched and unmuted auxiliary inputs and interphone Dimensions: 1.25 x 6.75 x 6.75 in (AA38-300)
• Audio outputs include headphone, cockpit speaker, CVR, selected COMM, 2.25 x 6.75 x 4.50 in (AA38-301)
and interphone 2.31 x 4.60 x 4.50 in (AA38-380, -381)
4.88 × 5.91 × 1.18 in (AA38-501, -504)
4.88 × 5.91 × 2.26 in (AA38-502)
4.88 × 5.91 × 1.18 in (AA38-601)
4.88 × 5.91 × 2.26 in (AA38-602)
Weight: 1.6 lb 4.88 × 5.91 × 1.9 in (AA38-603)
4.95 × 5.94 × 1.94 in (AA38-802)
Dimensions: 1.13 x 5.1 x 10.45 in
MIC inputs: 4 or 8 mic inputs: 0.250 mV/5W
Power: 28 V / 1 A max.
Headset outputs: 4 or 8: 100 mW @ 8 or 600W
Speaker Output: 10 watts @ 4Ω, rated Balanced output for high common mod noise rejection
8 watts @ 8Ω, continuous
ICS tie line: 1 or 2: 1.6 kW (NAT) or 250W for (Andrea)
Headphone Output: 107 mW (rated), 27 mW (continuous), @ 150Ω 2 ± 0.2 kW for NAT and SuperNAT
Frequency Response: Flat within 3 dB, 350–6,000 Hz AUX input: 1 or 2: 1W
Certification: TSO-C50C Compliance, DO-160C, DO-178A Level 2 Material/finish: 5052-H32 brushed aluminum with chromate
conversion finish
Temperature range: -45°C to 55°C
Mounting: Bulkhead mount with four 10-32 screws
*continued on next page
13
MISSION
READY
14
Noise figure: typ: 3.3 dB signals within 100 feet of the re-radiat-
max: 3.5 dB ing antenna of line-of-sight.
Ant – J1
• Provides ≥35 dB gain with the ampli-
Reverse isolation: min: 35 dB – Ant
fied roof antenna
Polarization: typ: RHCP
• Variable gain amplifier with LCLD
Kit includes: L1/L2 roof antenna
Indoor re-radiating antenna display and push button control
110V amplifier (with wall mount plug-in) • Includes mounting kit hardware, roof antenna, and re-radiating mount
• LMR 400 Ultra flex cable (50 ft)
AMPLIFIERS ALDCBS1X8B
ALDCBS1X8S
ALDCBS1X8-BNC
ALDCBS1X8-SMA
BNC
SMA
ALDCBS1X8T ALDCBS1X8-TNC TNC
14
3.5 maximum
Insertion loss: -3.6 - 6.0 dB Gain: 22 dB typical
-4.8 dB typical DC option: J1/Output 1 Pass DC
Amplitude balance: 0.5 dB typical 2 Output 2 Block DC
Input Pass DC
Isolation: 16 to 24 dB
Group delay flatness: 1 ns
Phase balance: 1°
Temperature range: Operating: -40ºC to 75ºC
Group delay flatness: 1 ns
Connector: SMA
Current draw: 15 mA
Temperature range: Operating: -40°C to 75°C
Finish lid: Anodize, Type II, Class 2, Black, per MIL-A-8625
Finish housing & base plate: Electroless Nickel Plated MIL-C-26074C Class 1,
.0001-.0003 Max
WITH 50 YEARS OF
EDMO# MFR# CONNECTOR TYPE
EXPERIENCE IN THE INDUSTRY,
TWO OUTPUTS
ALDCBS1X2 ALDCBS1X2-N N
EDMO KNOWS QUALITY.
ALDCBS1X2B ALDCBS1X2-BNC BNC
Everything our customers need for GPS, we supply: from
ALDCBS1X2S ALDCBS1X2-SMA SMA
TAWS systems, course deviation indicators, splitters, to
ALDCBS1X2T ALDCBS1X2-TNC TNC
panel docks, with a large inventory of accessories. All of
MIL-ALDCBS MIL-ALDCBS1X2-T TNC
this, and more: EDMO has it all.
FOUR OUTPUTS
ALDCBS1X4 ALDCBX1X4-N N
ALDCBS1X4B ALDCBS1X4-BNC BNC Call one of our friendly sales representatives at
ALDCBS1X4S ALDCBS1X4-SMA SMA 1.800.235.3300 with questions, or find exactly what you
ALDCBS1X4T ALDCBS1X4-TNC TNC need online at edmo.com.
EIGHT OUTPUTS
ALDCBS1X8 ALDCBX1X8-N N
Weight: 16 oz
MIL-SPEC HIGH-ISOLATION AMPLIFIED GPS
Dimensions: 6.5 x 2.5 x 1.4 in SPLITTER
Frequency range: 1.1–1.7 GHz GPS NETWORKING
In/out impedance: 50Ω EDMO# NHIALDCBS2
MFR# MIL-NHIALDCBS1X2-T/5/MC
Gain: -1.5 db to 1.5 db
Noise figure: 3.8 db This High-isolation, Mil-Spec, amplified
GPS splitters is based on the Wilkinson
Input voltage: 4.5–5.5 VDC
design and covers the entire L-band, GNSS
14
Current draw: 15 mA
frequencies with excellent gain flatness.
Temperature range: Operating: -40ºC to 75ºC All Mil-Spec GPS splitters pass the
rigorous MIL-STD 810F testing procedures
to be hermetically sealed, EMI shield, and
weather proofed. Each DC block output is
loaded with a 200Ω resistor to simulate
HIGH-ISOLATION AMPLIFIED GPS SPLITTER antenna current draw for preventing false
antenna alarm faults.
GPS NETWORKING
• Hermetically sealed
The ALDCBS1 GPS Amplified Splitter is
a one input, multi-output device with a • EMI shielded
17dB minimum gain block. The frequency • Amplifier gain 6dB typical
response covers the GPS L1 & L2 bands • Passes all GNSS frequencies (entire L-band)
with excellent gain flatness. In the normal
configuration, one of the splitter RF out- • Extremely flat group delay
puts (J1) passes DC from the connected • Less than 1ns variation
GPS receiver through the splitter to the • Military qualified 1X2 splitter
antenna, allowing the GPS receiver to
power both the antenna and the splitters • MIL STD 810F, MIL STD 704, MIL STD 1275B configured
amplifier. Each DC blocked output is • Excellent gain flatness
loaded with a 200Ω resistor to simulate • DC blocked outputs feature 200Ω loads
the antenna current draw to prevent false NHIALDCBS4
antenna alarm faults. • Prevent antenna alarm faults from connected devices
• Excellent Gain Flatness (J1-J8) < 1.0dB
• Extremely Flat Group Delay Less than 1ns variation
Weight: 12 oz
• Amplifier Gain 4dB typical
Dimensions: 3.25 x 2.5 x 1.3 in. overall
• Passes all GNSS frequencies (entire L-band) Temperature range: Operating: -40ºC to 75ºC
• DC blocked outputs feature 200Ω Loads Connector: SMA
• Phase matched outputs phase (J1-J8) < 1.0°
NETWORK AMPLIFIED ANTENNA SPLITTER • Excellent gain flatness for all GNSS frequencies
GPS NETWORKING • Passes entire L-band (GNSS) frequencies
The NALDCBS1X2 networked GPS ampli- • Phase matched outputs (less than 1.0)
fied splitter has one input and two outputs • DC blocked outputs with 200Ω loads
and is based on the Wilkinson splitter
design. The frequency response covers
the entire L-band (GNSS) frequencies with
excellent gain flatness. In normal configu- Frequency range: 1.1–1.7 GHz
ration, the RF output (J1) passes DC from In/out impedance: 50Ω
a connected GPS receiver through the Gain: min: 21.0 dB
splitter and onto the antenna allowing the typ: 22.0 dB
GPS receiver to power both the antenna max: 23.0 dB
and the splitters internal amplifier. Each Input SWR: 2.0:1
DC blocked output is loaded with a 200Ω Output SWR: 1.5:1
resistor to simulate the antenna current NALDCBS1X2
Noise figure: typ: 3.3 dB
draw to prevent false antenna alarm max: 3.5 dB
faults. Group delay flatness: 1 ns
• Excellent gain flatness for all GNSS frequencies Current draw: 15 mA
• Phase matched outputs (less than 1.0) Temperature range: Operating: -40ºC to 75ºC
• DC blocked outputs with 200Ω loads
14
EDMO# MFR# CONNECTOR TYPE GPS NETWORKING
TWO OUTPUTS These GPS Splitters are a one input,
NALDCBS12B NALDCBS1X2-BNC BNC
multiple output device based on the
Wilkinson splitter design. The frequency
NALDCBS12S NALDCBS1X2-SMA SMA
response covers the GPS L1 & L2 bands
NALDCBS12T NALDCBS1X2-TNC TNC with excellent gain flatness. In the normal
NALDCBS1X2 NALDCBS1X2-N N configuration, one of the splitter RF out-
puts (J1) passes DC from the connected
GPS receiver through the splitter to the
antenna. The other RF outputs are DC
loaded with a 200Ω resistor to block the
DC voltage and to simulate the antenna
NETWORK ANTENNA SPLITTER current draw to prevent false antenna
GPS NETWORKING fault detection. LDCBS1X4T
The NLDCBS1X passive, networked • Excellent gain flatness for all GNSS
GPS splitter with one input and multiple frequencies
outputs is based on the Wilkinson splitter • Passes entire L-band GNSS frequencies
design. The frequency response covers
the entire GPS L-band (GNSS) frequen- • Prevents antenna alarm faults from connected devices with 200 DC blocked
cies with excellent gain flatness. In the outputs
standard configuration without external
power, RF output (J1) passes DC from the
connected GPS receiver, through the split- Frequency range: 1.1–1.7 GHz
ter and onto the antenna, while the other
Impedance: 50Ω
RF outputs remain DC blocked. When
optional external power is applied, the DC Gain Flatness: 1.0 dB
output voltage on all RF outputs become NLDCBS1X2 Input SWR: 2.0:1
user selectable. Each DC blocked output Output SWR: 1.5:1
is loaded with a 200Ω resistor to simulate Insertion loss: -3.6 - 6.0 dB
the antenna current draw to prevent false antenna alarm faults. -4.8 dB typical
• Operates on 9-32 VDC military DC connector & provides DC output of 5 volts *continued on next page
GPS RF ATTENUATOR
EDMO# MFR# CONNECTOR TYPE GPS NETWORKING
EDMO# XXATTENPDC
TWO OUTPUTS MFR# XXATTENPDC-
LDCBS1X2 LDCBS1X2-N N
The XXATTENDC GPS RF Attenuator is
LDCBS1X2B LDCBS1X2-BNC BNC
a one input, one output device with a
LDCBS1X2S LDCBS1X2-SMA SMA constant attenuation anywhere in the
LDCBS1X2T LDCBS1X2-TNC TNC range from 1dB to 20dB, as specified by
FOUR OUTPUTS the customer. The device is available in
LDCBS1X4 LDCBS1X4-N 1x4 a miniaturized housing. The frequency response covers the GPS L1/L2 and
LDCBS1X4B LDCBS1X4-BNC BNC GLONASS bands with excellent flatness. In the DC Blocked configuration, the RF
output (J1) blocks DC from the connected GPS receiver through the attenuator
LDCBS1X4S LDCBS1X4-SMA SMA
to the antenna.
LDCBS1X4T LDCBS1X4-TNC TNC
• Block DC Antenna Voltage
14
• Extremely Flat Group Delay: Less that 1ns variation
SPLITTER • High Isolation Option: >35dB of isolation between adjacent output ports
GPS NETWORKING • DC Blocked Outputs feature 200Ω loads (prevents false antenna alarm
The RMALDCBS series hi-isolation rack faults)
mount GPS splitters have one input and • LED Power Light
either 16 or 32 outputs covering the
entire L1 band (GPS/GNSS) frequencies • Durable Rugged Standard 1U Chassis
with excellent gain flatness. In normal
operating configuration, the splitter
supplies power from an external source
Weight: 12 lb
to an internal amplifier and then to
Dimensions: 1.75 x 8.5 x 17 in.
an outside antenna. Each DC blocked
output is loaded with a 200Ω resistor Frequency range: 1.1–1.7 GHz
to simulate the antenna current draw Impedance: 50Ω
to prevent false antenna alarm faults. NHIRMALD16 Gain: 14.5 dB typical
This splitter is designed for timing and Gain high isolation: min: 3.0 dB
testing applications where GPS/GNSS typ: 4.0 dB
signal is required. Up to 16 or 32 devices can be tested simultaneously. max: 5.5 dB
Gain flatness: typ: 1.0 dB
• Excellent gain flatness max: 1.5 dB
• Extremely flat group delay Input SWR: 2.0:1
• Hi-isolation: >35 dB between adjacent output ports Output SWR: 1.5:1
• DC blocked outputs with 200Ω loads Noise figure: typ: 3.6 dB
max: 4.1 dB
Isolation: typ: 35 dB
max: 40 dB
Weight: 11.6 lb Current: 15 mA
Dimensions: 17 x 8.5 x 5.25 in. Temperature range: Operating: -40° to + 75°C
Frequency range: 1.1–1.7 GHz
Impedance: 50Ω
Gain: 14.5 dB typical
Current draw: 15 mA
1 each AIU-900IK installation kit
Temperature range: Operating: -40°C to + 75°C
TERRAIN AWARENESS
& ANNUNCIATION
12-, 16-, 24- POLE REMOTE RELAYS CONTROL UNITS
14
CANYON AEROCONNECT
The RS12/16/24 family of remote
switches allows large numbers of data or MD41 TAWS CONTROL UNITS
audio lines to be transferred with a single MID-CONTINENT INSTRUMENTS & AVIONICS
ground logic level. 14/28 VDC operation
is supported and the series is Transport The MD41 series of terrain awareness
Canada Type Approved for installation control units provide annunciation and
in IFR and restricted aircraft. The RS16 mode selection for Terrain Awareness
provides user definable remote switching Warning Systems (TAWS). These units
functions for more complex operations. It RS12-350 are available in horizontal and vertical
can work for both voltage or ground key- configurations, 14- and 28-volt versions, MD41-1028
ing, and has an independent ILS reversion and are compatible with multiple systems
logic switch (for ground keying mode). Each 4-pole switch has its own status including those made by Garmin, Honey-
annunciation for fault monitoring and airframe troubleshooting. Dry nitrogen well, L-3, and Sandel. These devices are
filled, gold contact, sealed relays provide dry-circuit to 0.5A switching range. equipped with automatic photocell dim-
ming, manual and remote test capability,
and a sunlight-readable display.
EDMO# MFR# DESCRIPTION # OF POLES/ MD41-1048
VOLTAGE • Presents the primary or secondary
visual TAWS alert within direct view of
RS12-350 RS12-350 GPS data switch/35k ft 12/14 OR 28
the pilot
RS16-001 RS16-001 Modular remote switch 16/28
RS24-020 RS24-020 GPS data switch 24/14 OR 28
• Provide annunciation and mode selection for terrain awareness warning
systems (TAWS), helicopter terrain awareness warning systems (HTAWS),
ACCESSORIES enhanced ground proximity warning systems (EGPWS)
EDI-RS12C EDI-RS12C RS12 install crimp kit
• Daylight readable annunciations with automatic photocell dimming and inter-
RS16-IKC D62SL-IKC RS16 install crimp kit nally lighted pushbuttons
D50SL-IKC D50SL-IKC D-min install crimp kit
• Remote annunciator test capability
COUNT ON EDMO TO HAVE EXACTLY WHAT YOU NEED, WHEN YOU NEED IT.
EDMO carries a comprehensive range of products including aircraft electronics, installation and bench supplies, wire and cable, tooling,
test equipment, tactical communication solutions, pilot supplies, and ground support equipment. Give us a call at 1.800.235.3300 or visit
edmo.com for parts and pricing.
MD222 SERIES COURSE DEVIATION • Users can install or remove the 695 or 696 GPS units within a matter of
INDICATOR seconds
MID-CONTINENT INSTRUMENTS & AVIONICS
EDMO# MD222-406
MFR# MD222-406 Weight: 8.9 oz
For smaller panel installations, the Dimensions: 6.25 × 8 × 2.85 in
MD222 Series 2-inch Course Deviation Included hardware: (4 each): AN365-832A elastic lock nuts, AN525-832R8
Indicator is an ideal solution, thanks screws with integral washers, AN960-8 flat washers,
to its compact, space-saving size. The MS35214 6-32 black instrument screws
units in this series have new-generation
rectilinear meter movements for more
accurate readings, a course selector,
and resolver output. Designed with EDMO# MFR# DESCRIPTION
precision-fit metal gears, ball bearings, AG-ITEM 29 PD13 Garmin 695/696 panel dock
and a glass lens.
ACCESSORIES
• 2-1/4-inch size
AG-ITEM 32 CA1 6 ft right angle audio cable
• Accurate rectilinear meter movements PD13-B PD13-B Latching bracket
• LED backlighting
• Built-in annunciations for NAV, GPS, and VLOC or BC
14
dimensions of 6.25 × 8 in. The size and screw panel.
hole locations match the 696 Panel Dock, which
makes it easy for users to upgrade from the 696
GPS and dock to the 795 or 796. The dock in-
Weight: 5.1 oz (without mounting hardware)
cludes an actuator button that allows the user to
Dimensions: 7.4 × 4.05 × 3.25 in
access the GPS device’s on-off switch at the top
of the device without having to remove it from the panel. A cooling port at the
back of the panel is compatible with standard avionics cooling fans if desired.
• Power button and release on front of mount
BM3MINI
Weight: 4.8 oz (without mounting hardware)
Dimensions (adjustable): Width: 7.1–11.1 in
Height: 5.62–8.17 in
Depth: 1.364 in
Weight: 5.9 oz (BM2)
2.5 oz (BM3MINI)
13.6 oz (BM3AIR)
Dimensions: 7.69 × 9.78 × 2.10 in (BM2)
5.53 × 8.18 × 1.76 in (BM3MINI)
12 × 9 × 4 in (BM3AIR)
IPAD KNEE DOCKS
AIRGIZMOS
iPad knee docks provide a convenient mount-
EDMO# MFR# DESCRIPTION ing location for a pilot’s iPad. The knee dock
BM2 BM2 For iPAD 1,2,3 for iPad mini offers immediate access charts
and maps right at the fingertips. Adjustable
BM3MINI BM3MINI For iPAD Mini
tilt angle allows the pilot to adjust the angle
of the mount for best viewing to cut down on
14
glare.
IPAD AIRMOUNTS
AIRGIZMOS
The AirMount provides a flexible KD2MINI
mounting solution for tablet devices.
This mounting solution allows users
to leave their device in the protective
case while securely mounting it in the
Weight: 7.5 oz (KD2AIR)
aircraft. The AirMount adjusts on three 6.3 oz (KD2MINI)
sides and holds the tablet in any orien-
Dimensions: 6.89 x 9.82 x 2.49 in (KD2AIR)
tation. Several mounting options are 5.53 x 8.18 x 2.34 in / 5.53 x 8.25 x 2.34 in (KD2MINI)
available for use with the AirMount.
BMT-AM1
Weight: 3 oz
Dimensions: 3 × 6.45 × 4.28 in
allows your iPad to be docked in seconds, the GPS more readable we offer the Angle
fully connected to the included 2.7 amp Adapter. It works in conjunction with the
power supply and audio with built-in cable Panel Dock and provides an additional 15
ports. Removal is just as easy - just slide, degrees of angle to the GPS, making it much
push, and remove. easier to see and use.The Angle Adapter fits
Kit includes: IPAMI-DUPK in the same physical opening as the Panel
Dock. The Panel Dock then slides into the
• SmartPanel Mount for iPad Mini
Angle Adapter to complete the installation.
• SmartPower Power Supply
• Apple MFi Lightning Cable with Open Wire Termination
• 3.5mm Audio Cable with Open Wire Termination Weight: 3.8 oz
• D-Sub 15-pin Solder Connector and D-Sub Cable Shield Dimensions: 2.27 × 6.45 × 8.11 in
Weight: 2.6 oz
Panel Cutout Dimensions:
Overall dimensions:
7.834 x 5.679 in
9.75 x 6.20 x 1.01 in
HORIZONTAL TILT ADAPTER FOR GARMIN
Output Current: 2.7 amps
196/296/396/496/510/560/660/IPHONE
Input Voltage: 9–48 VDC
AIRGIZMOS
EDMO# AG-ITEM 7
Output Voltage: 5 VDC +/- 0.25 (10 watt)
MFR# PD7
Material: Durable black ABS plastic
Many pilots will need to install GPS units on
the passenger side of the panel. To make
the GPS more readable we offer the Angle
Adapter. It works in conjunction with the
EDMO# MFR# DESCRIPTION Panel Dock and provides an additional 30
IPAMI-PKG IFDR-PM-IPAMI-PKG iPAD Mini mount and power supply package degrees of angle to the GPS, making it much
IPAMI-DUPK IFDR-PM-IPAMI-DUPK iPAD Mini mount and panel USB port package easier to see and use.The Angle Adapter fits
in the same physical vopening as the Panel
Dock. The Panel Dock then slides into the
Angle Adapter to complete the installation.
Weight: 2.7 oz
EDMO: BIG SELECTION,
PRODUCTS YOU KNOW &
Dimensions: 2.55 × 6.38 × 4.25 in
ACCOUNTABLE
GWAV8OR GWAV0R BendixKing AV8OR
GPS ACCESSORIES
14
INLINE GPS NOTCH FILTER
TED MANUFACTURING CORP
EDMO# 4-70-54
MFR# 4-70-54
The Inline GPS Notch Filter prevents harmonic
noise caused by communications radios from
interfering with onboard GPS units. While an
aircraft GPS receives positional information at
1575.42 MHz, the comm radios transmitting on
a completely separate frequency can still cause
interference. The TED 4-70-54 notch filter is a
simple, low-cost way to clean up the receiver’s
frequency environment. This device installs
with standard BNC bayonet couplings, in-line
between radios and antenna and is engineered to pass requisite environmental
criteria.
PARAMETER UNITS
Center notch frequency: 1575 MHz
Attenuation: 52 dB (over F+/-1.5 MHz)
Insertion loss: 0.1 dB (from 118 to 137 MHz)
Impedance: 50 Ohms (from 118 to 137 MHz)
VSWR: 1.5:1 (from 118 to 137 MHz)
SYSTEMS
er provides real-time flight information
by creating an interface between the
aircraft GPS receiver and the aircraft’s
flight management system. This
SAC7-35 AIR DATA COMPUTER devices interfaces with nearly every
major GPS and in-flight management
SANDIA AEROSPACE system and automatically calculates
The SAC7-35 Air Data Computer for Gen- real-time fuel usage, TAS, true air
eral Aviation is actually four systems in temperature, OAT, barometric pressure
one; it provides an altitude encoder, alti- correction, density altitude, and wind
tude alerting, fuel flow, and air data com- aloft without the need for manual entry.
puter. SAC 7-35 is an FAA TSO approved This information is then displayed via 962830-3A
altitude encoder that provides RS-232 the on-board NAV system, EFIS, and TAWS.
for newer generation transponders as • Supports every major GPS
well as standard Gilham Grey code for
legacy transponders. The system is also • Provides a standard ARINC 429 driver board with switch selectable output to
equipped with SANDIA’s altitude inflight drive most standard 429 systems
monitoring (AIM) that alerts pilots when- 705548-00 • Option available for baro-corrected altitude; pressure altitude data provided
ever the aircraft deviates 100 feet or by the F/ADC-2000 can be automatically used my most GPS manufactures
more from selected altitude. When paired with a fuel flow transducer, the SAC as a suitable substitute for forth satellite data when computing three-dimen-
7-35 provides all the fuel flow data required for navigation systems to monitor sional position (24-hour, 3-D position accuracy with only three satellites)
fuel flow. The SAC 7-35 is also a fully TSO’s air data computer with multiple • Equipped with a 55,000 ft, high-resolution encoder
interface formats that provide data to a wide variety of avionics systems.
• Includes: tray connectors, OAT probe, and install manual
Weight: 2.25 lb
Dimensions: 7.4 x 4.3 x 3.9 in
Weight: 1.18 lb Inputs: Pitot pressure
Dimensions: 5.62 x 4.87 x 1.89 in Static pressure
Electrical: 10–32 VDC @ 1 amp, max Outside air temperature
Heading synchro
Inputs: ARINC 407 Synchro Heading Baro correction
OAT Fuel flow
Pitot (airspeed)
Static (Altitude) Input power: 9_35 VDC, 1 watt nominal
Track, Mag, Var & Ground from on-board GPS Output: Auto baro corrected altitude, altitude blind encoder
5-volt pot baro output, air data output on ARINC 429 buss, [AS, TAS,
Fuel flow, pulse Mach, P.Alt, OAT, TAT, wind aloft, fuel flow L, fuel flow R,
GPS position (-01 version only) fuel used]
Air speed: 40–450 KTS Output format: RS-422, RS-232
ARINC 429 lo/high speed
15
01–0.99 MACH
Wind speed: 0–200 KTS ARINC 565 AC TAS
Vertical speed: ±9,999 ft/min Altitude: Up to 55,000 ft
±20,000 on ARINC bus Temperature range: Operating: -20°C to 55°C
Accuracy: ±25 ft (-1,000 to 5,000 ft) Software: RTCA DO-178A, level II
±30 ft (5,001 to 11,000 ft) Certification: TSO-C106, TSO-C44a, TSO-C88a
±35 ft (11,001 to 20,000 ft) RTCA DO-160B
±50 ft (20,001 to 30,000 ft)
±75 ft (30,001 to 35,000 ft)
Air temperature: Range: -60°C to 60°C
Accuracy: +1.5°C
Fuel flow: Flow rate: 1 – 14,400 GPH per side EDMO# MFR# DESCRIPTION: FUEL
K-factor range: 500 – 130,000 SENSOR
ADS-B: ARINC 743 labels (-01 version only) TYPE:
Altitude: 35,000 ft, max 962830-1A 962830-1A High level IF Digital
Resolution: 100 ft (Grey Code), 962830-2A 962830-2A Baro corrected altitude Sine wave
10 ft (RS-232), 10 ft (ARINC 429)
962830-3A 962830-3A Baro corrected altitude DC
Certification: TSO-C88a, ETSO-C88a
TSO-C106, ETSO-C106 962830A1S4 962830A-1-S-4 MS connector & quick start Digital
DO160E capability
DO178 level C
DO254 ACCESSORIES
670503 670503 Shield for OAT probe
670504 670504 Nut for OAT probe
670505 670505 Flat washer for OAT probe
EDMO# MFR# DESCRIPTION: 670506 670506 Shoulder washer for OAT probe
705548-00 705548-00 SAC7-35 Air Data Computer IK9630-1 IK9630-1 ADC-2000 installation kit
ACCESSORIES IK9630A-4 IK9630A-4 ADC-2000 installation kit with MS connector
IK9628 IK9628 Installation kit for the ADC200 Air Data Computer.
305580 305580 Programming computer
305588-00 305588-00 Electrical installation kit
15
Temperature range: -55°C to 70°C
Mounting: Aligned with longitudinal axis
(±0.5° for fix wing aircraft and ±2.0° for rotorcraft)
Enclosure: Machined 6061-T6 aluminum
Connector type: MIL-C 38999: Sourlau PN:8D0C-13F35PH
Airframe side: Sourlau PN:8D5-13F35SSN
Finish: Black anodized
Certification: RTCA/DO178B, Level A
DO-160E qualifications:
[(F2)V]BRXWXSFSZZAZ
[ZC][YK]M[A3J33]XXAC
Weight: 1.5 lb
Dimensions: 8.562 x 3.305 x 3.68 in
Power supply voltages: 28 VDC or 26 VDC, 400 Hz
Weight: 0.6 lb
Supply current: 300 mA @ 28 VDC
Dimensions: 3 x 3.2 x 3.2 in
Input data: Magnetic heading, ARINC 407 3-wire synchro pitch,
ARINC 407 3-wire synchro roll, ARINC 407 3-wire Input voltage: 14 to 28 VDC
Synchro heading reference 26 VAC 400Hz excitation Input current: 100 mA
11.8VLL
ARINC 429 input labels: 114, 115, 116, 147, 251, 310, 311, 312, 313, 275
Output data: ARINC 429 high speed labels:
320 (magnetic heading), Flight plan data: 074, 075, 113, 300-307
324 (pitch), 325 (roll) High/low select: Open = high speed
Altitude: 55,000 ft GND = low speed
Temperature range: Operating: -20°C to 55°C Outputs: RS-232 or RS-422 serial data
Storage: -55°C to 85°C Altitude: Up to 55,000 ft
Mounting: Rack Temperature range: Operating: -20°C to 55°C
Certification: RTCA/DO-160C Storage: -55°C to 85°C
In-flight loss of cooling: Equipment can run indefinitely without cooling
Certification: TSO-C129a Class A1
15
Weight: 0.4 lb
Dimensions: 3.23 x 3.175 x 3.175 in
Input voltage: 28 VDC Weight: 0.4 lb
Input Current: 100 mA Dimensions: 1.15 x 4.3 x 2.4 in
Input data: ARINC 429 Input Labels: High/Low Select Power supply voltage: 28 VDC
(Open = High Speed, GND = Low Speed) Supply current: 30 mA @ 28 VDC
Protection: Not internally fused
Inputs: Serial data: RS-232 or RS-422
Outputs: Serial data: RS232 or RS-422
EDMO# MFR# DESCRIPTION
Operating altitude: up to 55,000 ft
933620-00 933620-00 A-429 HS/LS to serial converter Temperature range: Operating: -20°C to 55°C
ACCESSORIES Storage: -55°C to 85°C
Weight: 1.7 lb
Dimensions: 8.5 x 4 x 2.4 in
Power supply voltage: 18 VDC to 33 VDC
SYNCHRO HEADING INPUT/ARINC 429 Supply current: 520 mA, max (745 mA, max including external loads)
CONVERTER Protection: Active current limiting to 2.0 VAC
SHADIN AVIONICS Inputs:
ARINC 429: high speed, 100 kbps ± 1%
The synchro heading input to ARINC 429 26 VAC references CH1, CH3: 24.7 VAC to 27.3 VAC
converter accepts the magnetic heading Discrete input (ARINC 463-3): Active: low/ground signal V < 3.5 VDC with I<20 mA
sink or R < 10Ω
(ARINC 407 3-wire synchro data inputs) Inactive: high/open signal 18.5 VDC < V < 36 VDC or R
and convert to ARINC-429 low speed > 100KΩ
output level 320. Outputs:
ARINC 429: High speed, 100 kbps ± 1%
Synchro X, Y, and Z (ARINC 0 to 11.8 VAC typical, 12.4 VAC max
407) (heading, pitch, and roll): 0.209 VA into 500Ω each channel
Synchro angle accuracy: Input angle ± 0.5°
Synchro valid CH1, CH2, CH3: 28 VDC (valid) / open (invalid) discrete, 75 mA max
Short circuit protection
200 mV/Deg
Weight: 0.4 lb
Altitude: Up to 55,000 ft
Dimensions: 1.15 x 4.3 x 2.4 in
Temperature range: Operating: -40°C to 70°C
Input voltage: 28 VDC Storage: -55°C to 85°C
Input current: 150 mA Certification: TSO-C4C, TSO-C5F, TSO-C6E
Input data: Magnetic heading, ARINC 429 3-wire synchro
1 discrete input: synchro valid
Output data: ARINC 429 LS data magnetic heading, label 320
Altitude: Up to 55,000 ft
Temperature range: Operating: -20°C to 55°C
Storage: -55°C to 85°C
AIS-360 ARINC 429 ADAPTERS
In-flight loss of cooling: Equipment can run indefinitely without cooling SHADIN AVIONICS
LS/HS ADAPTER
EDMO# 833610-01
EDMO# MFR# DESCRIPTION MFR# 833610-01
933753-00 933753-00 Synchro heading A-407 to A-429 converter
The AIS-360 ARINC LS/HS Adaptor has
two ARINC 429 low-speed input channels
ACCESSORIES and two ARINC 429 high-speed output
IK9339 IK9339 Install kit | 26 pin D-Sub channels. The AIS-360 receives any label
15
on the ARINC on the low speed input and
outputs it on an ARINC 429 high speed
bus with up to 440 µsec delay. During this process the label is not changed and
the update rate remains the some in the conversion.
AIS-450 ARINC 429 ADAPTER The AIS-360 provides, but not limited to, the following capabilities: ARINC 429
SHADIN AVIONICS transmit, ARINC 429 receive, discrete I/O, Bi-directional RS-232, Bi-directional
EDMO# 834510-00 RS-422/RS-485, and Ethernet
MFR# 834510-00
The AIS-450 is a digital to synchro-based BUFFER/ISOLATOR
converter that receives angular data EDMO# 833610-02
(head, pitch, and roll) on two ARINC 429 MFR# 833610-02
high speed inputs and converts it to three The AIS-360 ARINC buffer has two
ARINC 407 synchro outputs (3-wire). The ARINC 429 input channels and two
two ARINC 429 inputs accept only angular ARINC 429 output channels. The unit
ARINC 429 labels for heading, pitch, receives any label on the ARINC 429
and roll (ARINC 314, 320, 324, and 325). low speed input and outputs it on an
The high speed ARINC 429 outputs pass ARINC 429 low speed bus. Any label
through only the valid angular ARINC 429 received on the ARINC 429 high-speed input is output on the ARINC 429 high
labels received on the inputs. The three speed bus output. Label data and update rate remain the same.
ARINC 407 outputs are configured as a 3-wire synchro. The AIS-360 provides, but not limited to, the following capabilities: ARINC 429
• Current AIS-450 hardware capabilities: digital I/O, 3-channel ARINC 407 transmit, ARINC 429 receive, discrete I/O, Bi-directional RS-232, Bi-directional
3-wire synchro out, discrete I/O RS-422/RS-485, and Ethernet
• Common applications:
• ARINC 429 labels 314 or 320 to synchro heading output
• ARINC 429 labels 314 or 320, 324, and 325 to synchro heading, pitch, and Weight: 0.9 lb
roll output Dimensions: 8.5 x 4 x 1.59 in
• ARINC 429 to ADF, DME synchro *continued on next page
MODULAR ACCESSORY
Power supply voltage:
Current:
18 VDC to 33 VDC
100 mA max. REMOTE CARDS &
Protection:
Inputs:
Not internally fused
(LS/HS adapter)
ENCLOSURES
ARINC 429: low speed, 12-14.5 Kbps ± 1%
ARINC 429: high speed, 100 Kbps ± 1%
(Buffer)
ARINC 429: low speed, 12-14.5 Kbps ± 1%
ARINC 429: high speed, 100 Kbps ± 1%
Altitude: Up to 50,000 ft
Temperature range: Operating: -15°C to 70°C (-55°F to 85°F)
Certification: RTCA/DO-160F
305146-00 305001-01
The MARC 70 Switching and Interface modules provide installers with a wide a
wide variety of interface circuits needed to integrate avionics systems. MARC
ETM KEY RECORDER/USB 70 modules can be mounted individually in the SRU 1 or grouped in the SRU 5
or SRU 10 multi-card enclosures. The SRU 5 holds up to five interface modules
SHADIN AVIONICS while the SRU 10 holds up to 10 modules. MARC 70 modules are PMA approved
EDMO# 943200-11 and certified to 55,000 feet.
MFR# 943200-11
The ETM USB Recorder is designed to en- EDMO# MFR# MODEL DESCRIPTION
hance the storage capability in the Shadin
Engine Trend Monitor. Using 2 gigabytes MIL QUALIFIED SWITCHING MODULES
of data, the ETM USB Recorder has the 305001-01 305001-01 SR263 SR263 | Two, six-pole, nitrogen-filled
capability to store trend data for the life relays. The two relays can be activated
of an aircraft while providing the USB simultaneously or individually.
interface to make data downloads as easy 305002-01 305002-01 SR623 SR623 | Six, two-pole, nitrogen-filled relays.
as plugging in the USB flash drive. The six relays can be activated individually.
• Plug and play replacement from Data GA SWITCHING MODULES
Key Recorder 306110-00 306110-00 SR 34 SR 34 | Three, four-pole sealed relays to
• Eliminate Data Key, Key Reader and RS-232 Serial Port provide 12 lines of switching. Coil current
60 mA.
• Enhances ETM with storage for life of aircraft 306111-00 306111-00 SR 54 SR 54 | 20 poles of switching through five
15
912041T38D 912041TD
910532P
Weight: 0.5 lb
Dimensions: 1.2 x 3.4 x 5.13 in
Operating voltage: 28 VDC
The Shadin Miniflo, Digiflo, and Microflo fuel flow indicators display real time
fuel flow with up to ±1% accuracy for maximum fuel efficiency. When interfaced
Current: 160 mA (all relays engaged)
with an engine’s fuel flow transducer and a GPS, these devices display fuel
Contact rating: 1.0 amp @ 30 VDC used, fuel remaining, endurances, efficiency, fuel to destination, and fuel
Altitude: 50,000 ft (maximum) reserve. Each is equipped with an LED seven-segment display that can be tog-
Temperature range: Operating: -20°C to 55°C gled between different data fields. These devices are capable of transmitting
fuel information to Bendix/King KLN-88, KLN-90, and Garmin GPS navigation
receivers.
DIGIFLO
20 POLE SWITCHING UNIT Constant fuel rate, fuel used, fuel remaining, endurance (hours and minutes
SANDIA AEROSPACE until fuel exhaustion), Add/Full switch for one touch fueling, low fuel warning
(by time). Added feature for twin models: left engine used, right engine used.
The AIS 200B-35 is a 20-pole,
signal level, switching unit de-
signed for use with NAV systems
MICROFLO
that share aircraft HSI/CDIs OBS Communicates with most GPS receivers. Red dot matrix LED display, constant
functions. This unit has a revi- fuel flow (combine rate in left window for twins, with the capability to display
sionary relay which selects the individual engine flow rate at the touch of a button), fuel used, fuel remaining,
LOC signal for display on the HSI/ endurance, low fuel warning (by time), Add/Full switch for one-touch fueling,
CDI whenever a LOC channel is fuel to destination, fuel in reserve upon reaching destination, nautical miles, per
selected in the NAV unit. This unit unit of fuel spent.
15
uses 10 relays in a series/parallel
arrangement to provide the same MINIFLO
20 poles of switching. While Communications with most GPS receivers. Constant fuel flow rate (combined
model AIS 200B-35 is a direct fit rate in left window for twins, with the capability of displaying individual engine
and replacement for the AIS 200-35 and AIS 200A-35 models, installation of flow rates at a touch of a button), fuel used, fuel remaining, endurance, low fuel
this AIS 200B-35 remains the same warning (by time), fuel to fuel, add/full switch for one touch fueling.
• Operates on 28 VDC
• Direct fit for AIS 200-35 and AIS 200A-35 models EDMO# MFR# ENGINE TYPE UNIT
DIGIFLO-L
910532P 910532P Twin Gallons
Weight: 0.6 lb 910536P 3910536P Twin 6.7 pounds
Dimensions: 3.35 x 5.06 x 0.99 lb
MICROFLO-L
Operating voltage: 38 VDC
Contact rating: 1.0 Amp @ 30 VDC 912041T38D 912041T-38-D Single Gallons
Altitude: 50,000 ft (maximum) MINIFLO-L
Temperature range: Operating: -20°C to 55°C 912041TD 912041T-D Single Gallons
912045T38D 912045T-38-D Single Pounds
912046TD 912046T-D Twin Pounds
SHADIN FUEL FLOW INDICATORS ACCESSORIES AIS-380 REMOTE FLO FUEL FLOW ADAPTER
SHADIN AVIONICS
EDMO# MFR# DESCRIPTION The AIS-380 RemoteFlo Fuel Flow
660526AS 660526AS 70 GPH with ST pick-up
Adapter is a digital fuel flow module that
provides real-time access to fuel flow
660532S 660532S 200 GPH with coil top/ST pick-up
management information. It interfaces
660534HS 660534HS-00 7 GPH to 160 GPH with most major GPS and flight manage-
660534S 660534S 160 GPH with ST pick-up ment systems and calculates fuel infor-
680501-1 680501-1 Bare mation in real-time to be displayed on
ACCESSORIES an onboard NAV system. It is designed
to provide fuel flow on a digital output
610535 610535 Mounting bracket bus to a display or GPS receiver that can
610507 610507 Straight magnetic shield for 6605XX-XX series fuel receive ARINC 429 or RS-232. The AIS- 833811-01
transducers 380 receives a digital frequency signal from
543003B 543003B Transducer bracket a fuel transducer or equivalent, ARINC 429
546101 546101 Conical seal air data, and ARINC 429 heading, then combines this data and re-transmits it on
578168A 578168A Fitting nut tube coupling an ARINC 429 or RS-232 serial output bus.
• Two 12 VDC power supplies are available for powering fuel flow transducers
• ARINC inputs are echoed to the ARINC outputs
• ARINC speed (high or low) is configurable
SHADIN TRANSDUCER KITS • Each ARINC channel input and output speed is matched when configured,
e.g. ARINC channel 1 input channel set for high speed results in ARINC
EDMO# MFG# KIT COMPONENTS FUEL FLOW channel 1 output set for high speed
RANGE • Fuel Flow labels 244 (Total Fuel Flow) and 347 (Left and Right independent
(GPH) Fuel Flow based on SDI) are generated and output at an 8 Hz rate when
KIT-A KIT A FF transducer #680501A (1), 90° AN- 0 - 60 configured for normal fuel flow format
816-4-4 elbow fittings (2)
KIT-A1 KIT A1 FF transducer #680501B (1), AN-816- 0 – 60
4-4 90° elbow fittings (2), AN823-4 45°
elbow fitting (1), AN-912-1J bushing (1) Weight: 0.7 lb
Dimensions: 1.57 x 6.9 x 4.24 in
KIT-A1X KIT A1X No transducer, AN-816-4-4 90-degree
elbow fittings (2), AN-823-4 45-degree Power supply voltage: 28 VDC, nominal
elbow fitting (1), AN-912-1J brushing (1) Current: 100 mA @ 28 VDC
KIT-J KIT-J FF transducer #68050x (1), AN-816-6 0 – 60 Altitude: Up to 42,000 ft
fitting (1), T-fitting pipe to flare fitting (1), Temperature range: Operating: 40°C to 70°C
90-degree elbow fitting (1) Storage: -55°C to 85°C
KIT-L 660526AS FF transducer #660526AS (1), bracket 0 – 70 In-flight loss of cooling: Equipment can run indefinitely without cooling
(1), screw AN501A10-10 (4), bolt AN4- Software: DO-178B Level C
4A (4), washer AN960-416L (4), stop nut
(4), MS513531-85 nut (2), reducer (2), Certification: TSO-C44c incomplete system
15
for two engines. The design of the unit is based on a built-in microcontroller
and unique software, which supports different applicable systems. Rotary
micro switch SW1, on the converter, provides switching capabilities to select
different fuel flow. AVIONICS SOLUTIONS,
NO MATTER THE AIRCRAFT.
Weight: 1.0 lb EDMO HAS YOU COVERED.
Dimensions: 3.0 x 5.25 x 2.125 in.
Power supply voltage: 14–28 VDC
Supply Current: 150 mA @ 28 VDC
As a class-leading aviation distributor, EDMO keeps
Input data: Synchro Signals 11.8 Vrms, pace with the trends of the aerospace industry
Reference Voltage 26 Vrms/400 Hz
We’re constantly updating our inventory with our
manufacturers’ latest products, so there’s a good
chance we will have what you’re looking for.
DC FUEL FLOW TO FREQUENCY CONVERTER Give us a call at 1.800.235.3300 or visit
SHADIN AVIONICS
EDMO# 630502 edmo.com for parts and pricing.
MFR# 630502
This device receives analog Fuel Flow
(FF) signal in the form of a DC voltage
and produce a digital output signal
with a frequency proportional to the FF
signal. The digital output represents the
engine fuel flow and is available for use
DEDICATED
by a standard fuel management system.
Weight: 0.4 lb
Dimensions: 2.4 x 4.3 x 1.15 lb
Power supply voltage: 14–28 VDC
DC input voltage: 0–10 VDC
Input impedance: >100 MΩ
Digital frequency signal VOL < 0.8 V / IMAX = 15mA
output: VOH = 5V / IMAX = 0.5mA
Pulse Width (VOL)- 0.4 ms
Max. Frequency, VIN = 10 V / 1,221 Hz
Current: 70 mA @ 28 VDC
15
Altitude: -1,000 to 55,000 ft
Temperature range: Operating: -30°C to 55°C
Certification: TSO-C44b
Weight: 4.7 oz
Dimensions: 3.08 x 2.24 in
Range: 10 - 180Ω
Case: Valox 420 plastic
dependent) adjusts brightness to ambient light. Fly focused and aware with customizable
Units of measure: Altitude: feet or meters audio alerts, the AV-20S’ many display configurations offer several audio
Barometric setting: inches of mercury or millibars triggers to alert of critical flight information. The AV-20S will alert visually and
Airspeed: Knots, mph, or kph aurally if approaching a dangerous AoA—which is calculated by comparing the
Panel tilt & roll: Configurable: -90° to +90° aircraft’s pitch, flight path, and G-loading.
Panel roll: Configurable: -5° to +5°
• AoA Display (Voice Alerting & Peaks)
Lighting: 5, 14, 28 VDC external input or internal photocell
Programmable dimming curve • G-Meter Display (Voice Alerting & Peaks)
Pilot interface: 16-detent, push and turn knob • Attitude (Roll / Pitch), Slip / Skid Indication
Battery: Rechargeable, field-replaceable, internal battery • Clock (GMT / Local)
Technology: Nanophosphate® lithium-ion
Run time: 60 minutes minimum when fully charged and • Outside Air Temperature (C / F)
properly maintained
• Bus Voltage Display
Mounting: Front panel mounted
Mating connectors: Mid-Continent P/N 9017646 kit contains custom DB15
• Dual User Timers (Count Up / Down)
connector with configuration module, pitot and static • Engine Run Timer, Flight Timer
connectors
• Density Altitude Display
• True Airspeed Display (Kts / Mph)
Input power: 3 Watts (0.25 Amps @ 12VDC) (nominal) Input power: 6 Watts (0.5 Amps @ 12VDC) (nominal)
6 Watts (0.50 Amps @ 12VDC) (max) 12 Watts (1.0 Amps @ 12VDC)(max)
Contrast ratio: 500 Contrast ratio: (Typical) 500
Brightness: 1000 cd/m2 Brightness: (Typical) 1000 cd/m2
Backlight lifetime: 50,000 Hrs Backlight lifetime: (Typical) 50,000 Hrs
Viewing angle: left/right: 60º Viewing angle: Left/Right:60° Up:45° Down: 10°
up: 45º Temperature range: -20°C to +55°C
down:10º
Required circuit breaker: 2 Amp
Temperature range: -20°C to +55°C
Connectors: electrical: 15 Pin Male D-Sub
Connectors: electrical: 9 pin male D-Sub pneumatic: 1/4 in. OD Quick Connect
pneumatic: 1/4 in. OD quick connect
Mounting: (4X) #6-32 Machine Screws
Mounting: (4x) #6-32 machine screws 1/8” round instrument hole
Case material: high impact ABS plastic Case material: Billet Aluminum
16
of supplemental functions, including audio envelope alerting, derived angle of
attack presentation, g-load display, and more are provided. An internal battery
allows operation for up to 2 hours in the event of aircraft power loss.
• Primary Attitude, Slip, Direction Indication
• Probeless Angle Of Attack
• Indicated Airspeed (KTS/MPH) / Altitude / Vertical Trend / Alerter
• +8 / -8 G-Meter
• OAT / TAS / Density Altitude
• Bus Voltage
• GPS Navigational Data Overlay
• GPS HSI / 360 Rose / Arc Map Mode
• Customizable Colors, Fonts, & Layout
• Audio Alerts (AoA, G, Roll Limits)
• 2 Hr Typical Internal Battery Operation
EDMO carries a wide range of cockpit instruments
including custom options, so if you’re not finding what you
Weight: 0.50 lb need, give us a call at 1.800.235.3300 or visit edmo.com.
Dimensions: 3.38 x 3.38 x 1.6 in. We’re constantly updating our inventory so there’s a good
Input voltage: 10–32 VDC (nominal) chance we will have what you’re looking for.
60 VDC(max)
16
degrees all around ibration process. The A2 can be installed in any orientation, whereafter a proper
calibration needs to be performed.
• Back lit buttons
• Exhaust gas & Cylinder head temperature
EDMO# MFR# DESCRIPTION
• EGT Normalize mode
P1MK370AAM P1MK370AAM EKP V Portable GPS
• Differential EGT, Voltage (VDC) UX0IM000AM UX0IM000AM A2 ADAHRS Module
• Shock cooling ACCESSORIES
• LOP/ROP JPI exclusive leaning mode CBY1MG0500 CBY1MG0500 EKP V Power supply cable
CBYAMG0501 CBYAMG0501 EKP V Power supply cable | Cigarette lighter
socket
CBYUMG0400 CBYUMG0400 EKP V PC interface cable
Weight: 13 oz
HPC50AX HPC50AX EKP V Protective cover
Dimensions: 3.47 x 4.81 x 3.56 in
K10MK3010A K10MK3010A EKP V Plastic knee pad support
Voltage: 7.5–35 volts @ 0.5 Amp
K10LCE007A K10LCE007A EKP V Knee strap
Resolution: 1°F
K10MK3007B K10MK3007B EKP V Joystick kit
Accuracy: 0.5%
KAADC510US KAADC510US EKP V Power adapter
Display: 1000 nits
KABATPCK13 KABATPCK13 EKP V Lithium-ion rechargeable battery
UG0GRM10AM UG0GRM10AM EKP V External gps antenna
UX0DS100AM UX0DS100AM EKP V Cockpit docking station
EDMO# MFR# DESCRIPTION UX0DS300AM UX0DS300AM EKP V Cockpit cradle kit
UX0GUM10AM UX0GUM10AM EKP V External GPS antenna
000134-001 89000134-001 xPoint 100 Engine Data Monitor | 4 Cyl
UX0US100AM UX0US100AM EKP V Serial USB adaptor cable
000134-002 89000134-002 xPoint 100 Engine Data Monitor | 6 Cyl
ULTRA EFIS
AVMAP SATELLITE NAVIGATION
CHRONOMETERS & HOUR
EDMO# UX0EFS51AM
MFR# UX0EFS51AM
METERS
The Ultra EFIS is a complete instrumen-
tation system for primary flight display 800 SERIES CHRONOMETERS
(PFD) and horizontal situation indicator
(HSI) functions. It is a rugged and reliable DAVTRON INC
system designed for fixed panel installa- Davtron’s 800-series clocks are multi-functional chronometers with an easy
tion and fits in a standard 3 1/8” diameter to use two-button design. They display universal time, local time, and elapsed
hole. This unit combines 9 instruments time (other functions available), see the variant version below). The 800 series
into 1. Users get an Altimeter, Airspeed In- come with two different screen formats, either liquid crystal or incandescent —
dicator, Artificial Horizon, Directional Gyro both with illuminated screens that are readable in high sunlight situations.
/ HSI, Side Slip Indicator, Vertical Speed
Indicator, Automatic Direction Finder with M800
GPS, G-meter, and Magnetic Compass all • 2-1/4-inch internal mount
in one instrument. The Ultra EFIS contains
solid-state gyros, accelerometers, magnetic field sensors, air data sensors and • Two-button control system
motion processors. • Laser engraved faceplate
Connecting an external GPS receiver to the Ultra, the system provides the pilot • Liquid crystal display is illuminated for
with navigation information on the HSI page, providing its position, direction reading in dark conditions
and radials relative to reference navigation points. • Provides universal time, local time, and
• Preloaded with Jeppesen navigation POI’s an elapsed time alarm
• Coverage in Europe-Africa, North America, South America, Asia-Australia • Optional audio alarm
• Displays altimeter, airspeed, artificial horizon, directional gyro/horizontal • NVIS green A option
situation, side slip, vertical speed information 800-14V/24
• Keep-alive battery option
• Automatic direction finder with GPS • FAA-PMA approved
• Magnetic compass
• Fits in a standard 3 1/8” diameter hole
Weight: 4 oz
ENGIBOX ENGINE MONITORING SYSTEM Voltage: 12–30 VDC
AVMAP SATELLITE NAVIGATION Keep-alive current: 0.0004 Amps
Internal lighting: 230 mA @ 5 VDC
EngiBOX is a stand-alone Engine Monitor- 120 mA @ 14 VDC
ing System (EMS), developed especially 50 mA @ 28 VDC (specify voltage when ordering)
for Rotax Engines, displaying the engine Universal time: 24 hour format
parameters with an update rate of five Local time: 12 hour or 24 hour option, user selectable
times per second and recording 160
Elapsed time count up: Starts in minutes and seconds, then hours and minutes up
hours of data in the internal memory. It to 99:59 hours
is a rugged and reliable system designed Elapsed time count down: Settable from 1 seconds to 59 minutes and 59 seconds
for fixed panel installation and fits in a
Elapsed time alarm: Activates at zero when counting down
standard 3 1/8” diameter hole.
16
16
H35, J35, K35, M35, N35, 35-33, and 35-A33 5-VOLT
803-5V 1064-803-5V 803-5V | 5V lighting, voltmeter & OAT (temperature
probe included)
803-5V-NVG 1067-803-5V-NVG 803-5V | NVIS & OAT (temperature probe included)
EDMO# MFR# DESCRIPTION COLOR 803B-2-0/5 M803B-2-0/5-BATT 803-5V | 5V lighting, red & blue buttons, OAT
(temperature probe included), & backup battery
14-VOLT
B800-14V/B 1061-800B-14V-BLK 800-14V Black
14-VOLT
803-14V 1065-803-14V 803-14V | 14V lighting, voltmeter, & OAT
B80014V/SB 1061.91-800B-14V- 800B-14V | illuminated Black (temperature probe included)
SH-BLK buttons
803-14-NVG 1068-803-14V-NVG 803-14V | NVIS & OAT (temperature probe
B800-14V/C 1060-800B-14V-CRM 800-14V (cream) for Cream included)
mounting in Beechcraft
28-VOLT 28-VOLT
803-28V 1066-803-28V 803-28V | 28V lighting, voltmeter, & OAT
B800-28V/B 1059-800B-28V-BLK 800-28V Black (temperature probe included)
B80028V/NB 1061.5-800B-28V-NVG- 800B-28V | NVIS Black 803-28-NVG 1069-803-28V-NVG 803-28V | NVIS & OAT (temperature probe
BLK included)
B80028/NSB 1061.95-800B-28V-SH- 800B-28V | NVIS & Black 803B-2/28V M803B-2-0/28V-B 803-28V | 28V lighting, red & blue buttons, & OAT
NVG-BLK illuminated buttons (temperature probe included),
B80028V/SB 1061.92-800B-28V- 800B-28V | illuminated Black Cessna configuration
SH-BLK buttons
ACCESSORIES
B80028V24B B800-28V24B 800B-28V | 24-hour lighting Black
803-KIT MD9FJVLO Connector kit for Davtron clock models 803, 850,
877, 880, and 903 series
B800-28V/C 1058-800B-28V-CRM 800-28V Cream
BULB-AF BULB-AF-28V-24MA Replacement bulb for M803B clock, 28V
800B28VCRM 800B-28V-CRM 800B-28V | illuminated Cream
buttons
M877 CHRONOMETERS
The M877 series chronometers are M880 CHRONOMETERS
similar to the M850 chronometers but are The M880 series are designed for military
instead designed with an internal mount use and provide GMT and elapsed time
design rather than a front mount. This with countdown timer and alarm.
series provides GMT, local times, flight
time with alarm, and elapsed time with • 3 ATI front mount
countdown timer and alarm. • Two-button control system
• 2-1/4 inch internal mount • Laser engraved faceplate
• Two button control system with illumi- • Six-digit display provides GMT in hours,
nated buttons and annunciators minutes, and seconds, local time,
• Bright, sunlight-readable, incandescent elapsed time with countdown timer,
display with an automatic dimmer and elapsed time alarm
877-14V • Control switch can be setup for remote
• NVIS green A option
control 880A-28
• Displays Greenwich Mean Time, local times, flight time with alarm, elapsed
time with countdown timer, and elapsed time alarm • Incandescent display is sunlight-read-
able and can be manually dimmed
• Two faceplate options: the grey faceplate with screen-printed nomenclature,
and a black faceplate with engraved nomenclature • NVG filter compatible NVIS green A or BG7B
• Keep-alive battery option • Keep-alive battery
• FAA-PMA approved
Weight: 10 oz
Voltage: 28 VDC
Weight: 5 oz
Green Mean Time: 24 hour format, full six-digit hours/minute/seconds
Voltage: 14–28 VDC
Local time: 12 hour or 24 hour option
Keep-alive current: 0.00004 amps
Elapsed time count up: Starts in minutes and seconds, then hours and
Greenwich Mean Time: 24 hour format minutes, up to 99:59
Local time: 12 hour 24 hour option Elapsed time count down: Settable from 1 second to 59 minutes and 59 seconds
Flight time: Records in hours and minutes up to 99:59 Elapsed time alarm: Activates at zero when counting down
99.99 hour option
NVIS option: NVIS green A or BG7B
Flight time alarm: Full set range flight time
Battery type: AA size alkaline
Elapsed time count up: Starts in minutes and seconds, then hours and minutes
up to 99:59 Compatible with: For military use
Elapsed time count down: Settable from 1 second to 59 minutes and 59 seconds
16
Elapsed time alarm: Activates at zero when counting down
NVIS option: NVIS green A lighting
EDMO# MFR# DESCRIPTION
Battery type: AA size alkaline
880A-28 1109-880A 880A | NVIS Blue BG7B
Compatible with: Israel Aircraft Industries Model 1125 Astra and Galaxy
880A-S-ENH M880A-S-ENH 880A-ENH | NVIS green A
M880A-S 1110-880A-S 880A | NVIS green A
16
steer by presentation an aero designed of the top ratings in the industry at
lubber line on the lens that allows the pilot 4,800 hours MTBF. This instrument is a
to view the entire 360-degree dial in the direct replacement for most three-pin
proper relation to flight. turn coordinators and is ideal for use in
high-performing aircraft as well as cold
• Satisfies FAA requirement that each climate applications.
aircraft must have a magnetic compass
• Certified to FAA TSO C3b
• The magnetic-driven design has
reduced lead and lag than other similar • OEM standard — proven reliability
models due to eliminating pendulosity • Power warning indicator
• Naturally occurring, built-in eddy PAI-700/14
current dampening makes design inherently stable
Weight: 1.4 lb
EDMO# MFR# DESCRIPTION Dimensions: 3.25 x 3.25 x 5 in
PAI-700/5 PAI-700/5 5-volt MTBF: 1,800 hours (1394T100-7Z)
PAI-700/14 PAI-700 14-volt Turn indication: Standard 2-minute turn
PAI-700/28 PAI-700 28-volt Rotor type: AC (1394T100-3B)
DC (1394T100-7Z)
PAI-7005VR PAI-700 5-volt / red
Glass: HEA non-glare (1394T100-3B)
ACCESSORIES Clear (1394T100-7Z)
PACMG-2 PACMG-2 Universal mounting bracket | For aircraft that utilize a Altitude: -1,000 ft to 35,000 ft
glare shield or deck mount
Temperature range: -30°C to 50°C
PMO-U PACMO-UN Universal mounting bracket | For overhead installation
above the panel Mounting: 3-1/8 inch front or rear panel
Connector: 3-pin
16
Weight: DALT-55: 1.4 lb Input signal: 0.35–10 V
DAS-650: 1.3 lb Supply current: 0.3 Amps
Bezel length/width: 3.41 in / 3.41 in Temperature range: -20°C to 55°C
Instrument depth: 4.29 in DVOC accuracy: ±2 degrees
Body diameter: 3.00 in
DALT-55
Range: -1500 fy to 55,000 ft
Accuracy: 0.025% Typical EDMO# MFR# DESCRIPTION
DAS-650 903-1 1112-903-1 DVOR / LOC bar | front mount
Airspeed range: 0–650 knots 903-2 1113-903-2 DVOR / LOC bar | rear mount
Differential pressure: 0–30 in Hg 903ID-1 1114-903ID-1 Digital ID | front mount
903ID-2 1115-903ID-2 Digital ID | rear mount
AIRSPEED INDICATOR
U M A INC
VOLTMETERS &
EDMO# 16-210-400
MFR 16-210-400
AMMETERS
UMA airspeed indicators are highly accurate
instruments that use a diaphragm to detect DIGITAL O.A.T (FC) VOLTMETER
the difference the pitot pressure and static
pressure. This airspeed indicator fits in a DAVTRON INC
standard 2-1/4 inch mounting hole, black EDMO# 307FCE
and white dial markings, and has a 40-400 MFR# 1011-307FCE
MPH range. The 307FCE OAT and voltmeter outside air
temperature data in Fahrenheit and Cel-
sius as well as voltage on an easy-to-read
screen with an installation that requires
Weight: 6.9 oz minimal panel space.
Dimensions: 3.63 x 2.25 in • Minimal panel space
Mounting Hole Diameter: 2 1/4 in
• Lightweight
Range: 40–400 MPH
Dial Markings: Black and white • Sunlight readable display with automatic dimming
Case Material: Valox 420 plastic • Miniature remote probe
• LED display
• Laser engraved faceplate
• Displays temperature in Fahrenheit and Celsius
• Voltage (low voltage alarm)
VERTICAL SPEED INDICATOR
U M A INC • FAA-PMA approved
EDMO# 8-310-61S
MFR# 8-310-61SWW
UMA 3-1/8-inch vertical airspeed indicator Weight: 4 oz
is designed for fixed wing aircraft with
Dimensions: 2.52 x 1.1 x 2.7 in (maximum)
reciprocation turboprop engine. Black
and white dial.Rate of climb +/-0-6000’ Input voltage: 14–30 V
minimum. Dial has increasing/decreasing Input current: 150 mA (maximum)
markings. Red Arc + 5000’ TO -5000’. Temperature range: -40°C to 100°C (-40°F to 199°F)
(REV. B). Compatible with: Robinson Helicopter Models R22 and R44
• Increasing/decreasing markings
• Includes calibration sheet
VOLTMETERS
Weight: 8.8 oz
DAVTRON INC
Dimensions: 4.05 x 3.120 in
16
Weight: 3 oz
16
• Sunlight readable display
• One-tenth volt resolution ELECTRIC AMMETER
• FAA-PMA approved U M A INC
• Compatible with: Waco Models Classic EDMO# 15-260-100
Waco F5 and Classic Waco F5C MFR# 15-260-100
UMA 2-1/4-inch, 100-amp ammeter re-
475VA-14V quires an external shunt which is included
in the gauge. Standard markings on this
gauge are black and white.
Dimensions: 2.375 x 2.375 x 1.3 in (maximum) • -100 to 100 amp range
Input voltage: 14–28 VDC • 1CU4 100A (50 mV) shunt
Input current: 150 mA • 2-1/4 inch ammeter
Resolution: 0.1 Volt
• Air-core movement
Accuracy: ±1% of full scale
Temperature range: -25°C to +60°C
16
read screen with an installation that • Fahrenheit or Celsius versions available
requires minimal panel space.
• Provides temperature in Fahrenheit
and Celsius Weight: 4 oz
• Minimum panel space Dimensions: 2.52 x 1.1 x 2.7 in (maximum)
• Sunlight readable display with automatic dimming Input voltage: 12 V and 30 V
• Miniature remote probe Input current: 150 mA (maximum)
Temperature range: Operating: -25°C to 60°C
• Laser engrave faceplate Storage: -65°C to 150°C (-70°F to 290°F)
• FAA-PMA approved Compatible: Piper Aircraft Models PA-28-201-T, PA-28R-201T, and
PA-28RT-201T
Weight: 4 oz
Dimensions: 2.52 x 1.1 x 2.7 in (maximum) EDMO# MFG# DESCRIPTION
Input voltage: 12 V to 30 V 307CD 1009-307CD M307 Celsius Differential intercooler gauge | Included
mini probe
Input channel: 150 mV (maximum) 307FD 1014-307FD M307 Fahrenheit Differential intercooler gauge | Included
mini probe
Temperature range: Operating: 25°C to 60°C
Storage: -40°C to 100°C (-40°F to 199°F)
Compatible with: Compatible with: DeHavilland Models Dash-8, Series
100 (Model 101, 102, 103)
LEAD SPECIFICATIONS
Weight: 2 oz
Minimum lead length: 6 in twisted pair
DIGITAL TEMPERATURE PROBE Gauge: #22 AWG
Davtron’s D307PS probe is simple and Wire type: Teflon Hook-Up wire
efficient to use, requiring only one port Wire color: Black
pin for communication and no external THERMISTOR SPECIFICATIONS
components.
Type: NTC (RL0503-2890-95-MS)
• Uses 1-wire® interface that requires Material: D9.5
D307PS
only one port pin for communication Accuracy: +/- 1C @ 25°C
and no external components
Resistance: 5K ohms @ 25°C
• Each device has a unique 64-bit serial code stored in an onboard ROM Temperature Range: -50°C to 150°C
• Multidrop capability provides simplified distributed temperature sending
applications
• No external components required
• Can be powered from a data line
16
SWITCHES
AEROMETER AIRSPEED SWITCH/STC
The Aerometer is a FAA PMA approved
device that electronically activates an hour
meter when an aircraft exceeds 27 mph. The
Aerometer accurately tracks an aircraft’s
“time in service” from the moment it lefts
off to the moment it touches down again 76579 77039 79380
and not the time spent taxing, warming The 5000 Series Pressure switches are specifically designed for use in extend-
up, or waiting for clearances. This device ed duty applications. These switches are factory set but can be adjusted in the
comes in a complete kit and installation field. It features a Kapton diaphragm for compatibility with a wide variety of
time takes about two hours without requir- fluids and various termination including a Metri-Pack connector that forms a
ing structural or sheet metal modifications. tight seal when connected.
Certain aircraft may require an addition
installation kit.
16
SINGLE CIRCUIT / TWO TERMINALS
76575 076575C N.O. circuitry 3.1 – 7 psi / 4 psi
76577-4 76577-00000040-01 N.C. circuitry 3.1 – 7 psi / 4 psi
76577B-4 76577B-4 N.C. circuitry 3.1 – 7 psi / 4 psi
AIRSPEED SWITCH 76576 076576d N.O. circuitry 8 – 13 psi / 10 psi
BISHOP AVIATION 76062-15 0760620000015005 N.C. circuitry 14 – 24 psi / 15 psi
EDMO# S-1498-2 DUAL CIRCUIT / ONE CIRCUIT ADJUSTABLE
MFR# S1498-2 76579 076579C Screw terminals 3.1 – 7 psi / 4 psi
The S1498-2 airspeed switch mounts 77039 077039C With Merti-Pack 4 – 6 psi / 5 psi
externally on Cessna aircraft. Connects terminal, mates
with Packard P/N
to the pitot static tube on the wing and 12034147)
allows air from the pitot static tube to
76580-10 76580-10 Screw terminals 8 – 13 psi / 10 psi
activate the hourmeter.
76072-15 76072D Screw terminals 14 – 24 psi / 15 psi
ACCESSORIES
79380 079380A 00 Boot for Hobbs pressure switch
PRESSURE SENSORS
The MPL 500 Series are miniature
pressure sensors with set points available
CO DETECTORS
from 0.05 in/H2O to 20 PSI. Standard fea-
tures include high and low ports which are
parallel to the body and can be applied for
pressure, vacuum, or differential inputs.
The 500 Series pressure switches are
excellent for general purpose applications
AERO 553 MULTI-FUNCTION
suitable for low pressure to electric inter- CO DETECTOR
face for monitoring and control. GUARDIAN AVIONICS
0503DC EDMO# 553-101001
MFR# 553-101-001
The AERO 553 Multi-Function Carbon
Resistance: 500 mΩ, max.
Monoxide (CO) detector is a panel mount-
Burst: 25 PSI
ed TSO Certified unit designed especially
Contacts: Gold-alloy, cross-point for use in both FAA certified aircraft and
Body: Glass-filled polyester experimental aircraft. Designed to fit
Diaphragm: Polyurethane, fluorosilicone, EPDM, Teflon® in a standard 2.25 inch panel cut-out,
16
Temperature range: -40°C to 120°C the AERO 553 features a clock, timer,
temperature, cabin and density altitude
functions along with highly accurate and
extremely fast CO detection and PPM
EDMO# MFR# CIRCUIT / FACTORY SET POINT: readings within the cockpit on an easy-
to-read LCD display. The AERO 553 will
0503DC 0503DC-BP-0006 Normally closed | 1-inch in H2O detect and display true CO levels from 30
MPL503 0503DO-XS-0001 Normally open | 0.5–3-inch in H2O PPM to 999 PPM for real-time tracking of Carbon Monoxide in the cockpit. The
MPL-503E 0503VO-BP-0005 Normally open | 40–150-inch in H2O 553 will alarm if the CO level exceeds 50-70 ppm for more than 5 minutes or
will provide an instant alarm if CO spikes above 300 PPM within one minute.
The built-in pressure sensor indicates altitude warnings at 10,000 feet, 12,500
feet, and 14,000 feet as a reminder to the pilot that supplemental oxygen
should be used. These warnings are displayed on an optional annunciator light.
This CO detection unit is perfect for owners and pilots looking for protection
PRESSURE SENDING UNIT from the dangers of carbon monoxide in their certified aircraft and integration
U M A INC with an existing PFD, MFD, or engine monitor system.
UMA pressure senders are TSO’d approved • Clock function displays local and zulu time in a 24 hour format
and feature precision, solid state sensors and
circuitry offering unequalled performance. • Flight timer starts automatically on take-off when 150 feet above runway
These pressure senders are available in gauge, level; manual start also available
differential, and absolute types and compatible • Stop watch function allows pilots to time any segment of the flight
with avgas, jet fuel, engine oil, and many other • Keeps track of inside and outside air temperature in Fahrenheit and Celsius
fluids. The internal voltage regular make these
units compatible with indicating instruments • Instant alerts when battery level drops or rises above preset levels for 14
that do not have precision output voltages. and 28 volt systems
Units for fuel and oil pressure are certified • Monitors cabin altitude and sounds an alert above 10,000, 12,500, and
under TSO-C47 and manifold pressure are under TSO-C45a. 14,000 feet
• Density altitude is based on the absolute pressure and OAT DISPLAY INFORMATION FOR CARBON MONOXIDE
DETECTOR/PULSE OXIMETER:
AERO 553 COMAPATIBLE PFD, MFD, AND ENGINE • Garmin G3X, Garmin G3X Touch, G900 and G1000 display CO levels, heart
MONITOR PRODUCTS: rate, and SPO2 levels; GNS 480 displays CO levels only
• Garmin: Garmin G3X, Garmin G3X Touch, Garmin GNS 480, Garmin G900 • JPI EDM 730, EDM 830, EDM 900 Primary, EDM 900 Experimental, and EDM
(Garmin G1000 reporting available with AERO 452 OEM unit only) 960 Twin display CO levels, heart rate, and SPO2 levels
• J.P. Instruments (JPI): EDM 730, EDM 830, EDM 900 Primary, EDM 900 • Electronic Instruments MVP-50P, MVP-50T, and CGR-30P display CO levels
Experimental, EDM 960 Twin
• Grand Rapids Technologies Sport Series, Horizon HX, and HXr EFIS Systems
• Electronics Instruments (EI): MVP50P, MVP-50T, CGR-30P display CO levels, heart rate, and SPO2 levels
• Advanced Flight System: AF2500/3500/4500/5000/5400/5500/5600/5800
• Grand Rapids Technologies (GRT): Sports SX, Horizon HX, and HXr EFIS
Systems
Weight: 8 oz
• Ultra Electronics: AuRACLE CRM 2120
Dimensions: 2.95 x 2.5 x 2.5 in
• MGL Avionics: XTreme EFIS
Input voltage: 14 or 28 VDC
Bluetooth: Supports Nonin 9560 through a Bluetooth connection
Remotely monitor a passenger with a Nonin pulse
oximeter on a G1000
Weight: 7.5 oz
RS-232 output: CO level, heart rate, cabin temperature, cabin pressure,
Dimensions: 2.25 x 2.25 x 2.5 in SPO2 blood oxygen level
Input voltage: 9–30 VDC Temperature range: -20°C to 70°C
Power consumption: Less than 2 watts
Circuit breaker: 2 amps
Humidity: 5% to 95% (non-compensating)
Interface: RS232 to UPS CNX80; CO level, cabin temperature, and
cabin pressure (software level 2.0 required on CNX80)
AERO 55 CO DETECTOR REMOTE DISPLAY
Temperature range: 0°F to 110°F
GUARDIAN AVIONICS
EDMO# 55-101-003
MFR# 55-101-003
The AERO 55 is a remote display that
functions as a display unit the for AERO
AERO 455 PULSE OXIMETER AND 455 carbon monoxide detector. This
CO DETECTOR unit is designed for aircraft without a
GUARDIAN AVIONICS multi-function display (MFD) and displays
EDMO# 455101001R readings from an Aero 455.
MFR# 455-101-001R
The AERO 455 panel mounted Pulse
Oximeter and Carbon Monoxide (CO) De-
tector is a compact unit that conveniently
mounts to the panel allowing pilots and
crew to measure blood oxygen levels and Weight: 7.5 oz
heart rate along with cabin temperature,
16
Dimensions: Fits standard 2-1/4 inch round cut-out & 2-1/2 inch deep
cabin altitude, and accurate CO detection Input voltage: 9–30 VDC
in the cabin with display on an external Power consumption: Less than 2 watts
unit. This TSO certified device is designed Circuit breaker: 2 amps
for owners and pilots of certified aircraft
Humidity: 5% to 95% (non-condensing)
who require protection from the dangers
of hypoxia while flying at altitude and Temperature range: 0°C to 50°C
from carbon monoxide in the cabin. The
built-in pressure sensor reminds pilots when supplemental oxygen should be
used at 10,000, 12,500, and 14,000 feet. If the CO levels climb above 50 ppm,
a loud 85 dB audible warning will sound along with a flashing amber light. If
CO levels climb above 99 ppm, the audible alarm and a flashing red light will
WITH 50 YEARS OF
be triggered. A RS-232 serial connection allows CO reporting and alerts to be
displayed on a primary flight display (PFD), multi-function display (MFD), and
also engine monitoring products, as well as the AERO 55 display unit.
• Built in carbon monoxide (CO) detector displays above 10 ppm
EXPERIENCE IN THE INDUSTRY,
• CO greater than 50 ppm triggers an alarm mode within five minutes
EDMO KNOWS QUALITY.
• Internal fan for optimum CO sensing Everything our customers need for cabin safety, we
• Tone generator for headsets supply: from CO detectors to airspeed and pressure
• Built-in pressure sensor provides cabin pressure altitude warnings at 10K, switches with a large inventory of accessories. All of this,
12.5K and 14K feet and more: EDMO has it all. Call one of our friendly sales
• Pressure sensor tested up to 25,000 feet representatives at 1.800.235.3300 with questions, or find
• RS-232 output reports CO levels, heart rate, cabin pressure, cabin tempera- exactly what you need online at edmo.com.
ture, and SPO2 blood oxygen level
Weight: 4 oz
Dimensions: 4.5 x 1.625 x 1.25 in
AERO 451 CO DETECTOR
Input voltage: 14 or 28 VDC GUARDIAN AVIONICS
Humidity: 5% to 95% (non-condensing) The AERO 451 is a panel mount carbon
Circuit breaker: 2 amp monoxide detector designed for FAA
RS-232 output: Will display carbon monoxide levels or a warning on the
certified Part 23 aircraft, and Part 27
following products and Part 29 rotorcraft. Compact and
Garmin: GNS480, G3X, G3X Touch, G900, and G1000 lightweight, this CO detector requires
JPI: EDM 730, EDM 830, EDM 900 Primary, EDM 900 little panel space and provides highly
Experimental, EDM 960 Twin
Electronic Instruments: MVP50P, MVP-50T, CGR-30P accurate CO detection. Onboard CO
Advanced Flight System: AF2500/3500/4500/5000/540 sensor alarms warn users when CO
0/5500/5600/5800 levels measure greater than 50 ppm with
Grand Rapids Technologies: Sports Series, Horizon HX, a loud audible alarm and flashing LED
and HXr EFIS Systems
Ultra Electronics: AuRACLE CRM 2120 light. This unit is perfect for builders and 451-101
MGL Avionics: XTreme EFIS pilots who are looking for basic protec-
tion from the dangers carbon monoxide
in their certified aircraft or helicopter.
• Shielded to prevent EMI with aircraft
16
SYSTEMS
• Optimized for use with Trig Nav/Com units
Weight: 0.59kg
TX57 STACK NAV/COM Dimensions: 3.25 x 3.25 x 4.75 in (82.55 x W 82.55 x 120.65 mm)
TRIG AVIONICS LIMITED Front panel dimensions: 3in (76mm)
EDMO# 01579-00 Supply voltage: 12–32 VDC
MFR# 01579-00-01 Temperature range: Operating: -55ºC to 70ºC
The TX57 Stack NAV/COM unit Certification: FAA TSO-C34e
from Trig Avionics is perfect
for upgrading legacy avionics
or adding to a new aircraft. The
slimline and highly efficient
NAV/COM unit has a 33 mm
high case that saves valuable CVC-151 VHF COMMUNICATION SYSTEM
stack space. The Stack NAV/COM avionic units are ideal for those seeking a CANYON AEROCONNECT
VOR navigation backup, an easy-to-use training platform for flight schools, or a
The CVC-151 is an all-in-one, VHF com-
NAV/COM unit with reliable digital VFR/IFR capabilities.
munication DSP transceiver configurable
The bright and clear display shows both primary and secondary frequencies with either 8.33 kHz or 25 kHz channel
along with airfield VOR identifiers. A ‘Push step’ knob allows for fast switching spacing and operating frequencies of 118
between 8.33 kHz and 25 kHz. The ‘Say again’ feature replays the last radio MHz to 137 MHz or optionally 118 MHz
transmission with single button. The TX57 decodes Morse Code and provides to 152 MHz (depending on the customer’s
VOR/ILS identification while the NAV receiver monitors a second VOR for request) and features built-in SELCAL and
enhanced route navigation — allowing the pilot to quickly calculate an accurate ACARS capability. The CVC-151 utilizes
position fix. With built-in course deviation indicator (CDI), pilots can navigate the open ARINC 429 architecture to sup-
without an external CDI unit. Slimline — only 33 mm high port FMS, RMS-555, ARCDU, and RAIMS
• Bright and clear display with simple user interface radio management system interface.
This radio can also be remotely controlled from its dedicated CVC-152 control
• Unique ‘Push Step’ provides faster tuning
display.
• Dual Watch function monitors two COM or two NAV frequencies simultane-
• ICAO annex 10 FM immunity requirements (DO-186A)
ously
• Stereo music and two place intercom
• ‘Say Again’ feature allows playback of last transmission
Weight: 3.75 lb
• USB port on facia for uploading over 200 COM and NAV frequency database Dimensions: 2.4 x 4 x 12.95 in
from a CSV file
Altitude: 55,000 ft
• VOR/ILS receiver monitors a second VOR channel Temperature: -55°C to 70°C
• Built in VOR/LOC converter, digital CDI, & 40-channel glideslope receiver Input power: 28 VDC (18 VDC to 33 VDC)
Current: Rx: 0.5 A
Tx: 4.5 A
Frequency range: 118 MHz to 136.975 MHz
Weight: 2.42 lb (1.1 kg)
16
118 MHz to 151.975 MHz (optional)
Dimensions: 1.3 x 6.26 x 10.63 in (33 x 158.75 x 273.72 mm) Audio output: 10 mW
Install depth: 9.05 in (230 mm), in tray Certification: RTCA/DO-186a, DO-178b level C “Major”,
Supply Voltage: 22–33 VDC DO-254, DO-160E
Nominal Transmit Power: 16 watt
Power Consumption: 140 mA (receive), 2.5A (transmit)
Temperature range: Operating: -20°C to 55°C
EDMO# MFR# DESCRIPTION
Certification: ETSO 2C128, 2C169a, 2C34f, ETSO 2C36f, 2C40c,
TSO-C128a, TSO-C169a, C34e, TSO-C36e, C40c CVC-151-1 400-048100-0001 CVC-151 VHF Communication System
ACCESSORIES
048124-01 400-048124-01 Single mounting tray
048124-02 400-048124-02 Dual mounting tray
02398-0000 050-02398-0000 Connecter kit
TI106 CDI COURSE DEVIATION INDICATOR
TRIG AVIONICS LIMITED
EDMO# 01913-00
MFR# 01913-00
Trig’s TI106 is a 3″ Course Devi-
ation Indicator, ideally matched
for the TX57. Using the latest
generation of indicator technol- Not finding what you need?
ogy, solid state actuators pro-
vide smooth and dependable navigational indications. Use of LED technology If you don’t see what you need here, it’s likely we have it, or can order
for both flags and backlighting provides a superior display compared to older it in for you. As always, give us a call at 1.800.235.3300 or visit edmo.
legacy indicators. The TI106 will support most existing Nav/Com equipment, com for parts and pricing.
making it a suitable replacement CDI across general aviation.
Weight: 3.6 lb
Dimensions: 2.4 x 4 x 12.95 in
Frequency range: Rx: 962 MHz to 1213MHz
Tx: 1025 MHz to 1150 MHz
Input voltage: 27.5 VDC (18–33 VDC)
Current: 0.5 A (nominal), 1.8 A (peak)
Weight: 9.6 oz
Height: 18.5629 in
Frequency: 118–137 MHz
VSWR: 2.5:1, maximum
Airspeed: 250 KTAS
Weight: 0.5 lb
Altitude: 50,000 ft
Height: 18.75 in
Connector: BNC (female)
Frequency: 118–137 MHz
Mounting: Four-hole external
VSWR: 2.5:1, maximum
Material: Die-cast housing / fiberglass
Polarization pattern: Omnidirectional
Finish: Polyurethane enamel
Power RF: 50 watts
Certification: TSO-C37d, TSO-C38d
Altitude: 50,000 ft RTCA DO-160D
Connector: BNC (female)
Material: Cast housing / fiberglass whip
Finish: Polyurethane enamel
Certification: TSO-C37d, TSO-C38d
RTCA DO-160D AV-529 VHF WHIP / 118-136 MHZ
R A MILLER
EDMO# AV-529
MFR# AV-529
The AV-529 is designed for broadband communi-
CI 121 VHF WHIP / 118-137 MHZ cations on frequencies from 118 MHz to 137 MHz.
COMANT It has a die-cast aluminum base and a uniquely
EDMO# CI-121 designed radiator encapsulated in a fiberglass whip.
MFR# CI 121 • The AV-529 antenna is supplied with a weath-
The CI 121 is a whip antenna that has a tapered er-sealing gasket and mounting hardware
glass laminate housing and die-cast aluminum
base.
17
Weight: 8 oz
Height: 22 in, maximum
Frequency: 118–137 MHz
VSWR: 1.8:1, maximum
Polarization: Vertical
Radiation pattern: Omni-directional
Weight: 8 oz
Airspeed: 350 MPH
Height: 18.5 in
Altitude: 50,000 ft
Frequency: 118–137 MHz
Connector: BNC (female)
VSWR: 2.5:1, maximum
Certification: TSO-C37d, TSO-C38d
Airspeed: 250 KTAS
Altitude: 50,000 ft
Connector: BNC (female)
Mounting: Four-hole external EDMO# MFR# DESCRIPTION
Material: Die-cast housing / fiber glass whip
AV-529 AV-529 VHF whip antenna
Finish: Polyurethane enamel
ACCESSORIES
Certification: TSO-C37d, TSO-C38d
RTCA DO-160D 19-1568-2 19-1568-2 Hardware installation kit
Weight: 8 oz
EDMO# MFR# DESCRIPTION
Height: 22.75 in, maximum
AV-14 AV-14 VHF whip antenna
Frequency: 118–137 MHz
ACCESSORIES VSWR: 2.5:1, maximum
19-1568-4B 19-1568-4B Hardware kit Polarization: Vertical
Radiation pattern: Omni-directional
Airspeed: 350 MPH
Altitude: 50,000 ft
Connector: BNC (female)
AV-10 VHF WHIP / 118-137 MHZ Certification: TSO-C37d, TSO-C38d
R A MILLER
The AV-10 is a high-performance VHF communica-
tions antenna with excellent electrical characteristics
17
and incorporates an efficient aerodynamic, four-hole EDMO# MFR# DESCRIPTION
mounting base. The antenna essentially matches AV-530 AV-530 VHF whip antenna
the styling of the communication antennas currently
used on most singles and light twins. ACCESSORIES
19-1568-2 19-1568-2 Hardware installation kit
AV-534 VHF WHIP / 118-137 MHZ CI 122 VHF BENT WHIP / 118-137 MHZ
R A MILLER COMANT
EDMO# AV-534 EDMO# CI-122
MFR# AV-534 MFR# CI 122
The AV-534 is a heavy-duty stainless-steel, The CI 122 has a stainless steel bent whip
quarter-wave VHF communications antenna element and diecast aluminum
antenna. It is manufactured with a durable base. Designed specifically for mounting
type stainless steel whip and large to the underside of an aircraft, providing
stress-relieved ferrule. It comes complete radiation coverage for air-to-ground VHF
with porcelain insulators and mounting communications.
hardware.
Weight: 12 oz
Weight: 8 oz Height: 18.5 in
Height: 18.75 in, maximum Frequency: 118–137 MHz
Frequency: 118–137 MHz VSWR: 3.0:1, maximum
VSWR: 3.0:1, maximum Airspeed: 350 KTAS
Polarization: Vertical Altitude: 50,000 ft
Radiation pattern: Omni-directional Connector: BNC (female)
Airspeed: 350 MPH Material: Cast housing / stainless steel
Altitude: 50,000 ft Finish: Polyurethane enamel
Connector: N/A Certification: TSO-C37d, TSO-C38d
Certification: TSO-C37d, TSO-C38d RTCA DO-160D
AV-534L VHF WHIP / 118-137 MHZ AV-17 VHF BENT WHIP / 118-137 MHZ
R A MILLER R A MILLER
EDMO# AV-534L The AV-17 is designed specifically for
MFR# AV-534L mounting to the underside of an aircraft,
The AV-534 is a heavy-duty stain- providing an excellent radiation pattern
less-steel, quarter-wave VHF communi- for air-to-ground communications. It has a
cations antenna. It is manufactured with four-bolt mounting base and a low profile
a durable type stainless steel whip and making it ideal for helicopters and low-
large stress-relieved ferrule. It comes wing aircraft.
complete with porcelain insulators and
mounting hardware.
• The AV-534L antenna is supplied with Weight: 8 oz
an eight-foot transmission line and
Height: 9 in, maximum
connectors
Frequency: 118–137 MHz
VSWR: 3.0:1, maximum
Polarization: Vertical
17
AV-535 VHF BENT WHIP / 138-174 MHZ CI 196 VHF BLADE / 118-137 MHZ
R A MILLER COMANT
EDMO# AV-535 EDMO# CI-196
MFR# AV-535 MFR# CI 196
The AV-535 is a bent whip type antenna The CI 196 is a high speed blade antenna
that operates in the public service and designed for large single- or twin-engine
business bands. It is suitable for mount- aircraft. The antenna assembly is enclosed in
ing on the bottom the aircraft. Rated at an aerodynamically shaped, ejection molded
speeds up to 350 mph and altitudes up to polyester glass shell with internal components
50,000 feet. It is a direct replacement for form in place for mechanical integrity. Fea-
the CI 292-3. turing reduced height for mounting on top or
bottom of aircraft. The mounting hole pattern
and RF connector location are compatible with
late model Mooney 201/231/252 aircraft series
Weight: 8 oz start in 1978.
Height: 9.81 in
Frequency: 138–174 MHz
VSWR: 3.0:1
Weight: 1.25 lb
Polarization: Vertical
Height: 13 in
RF power: 100 watts
Frequency: 118–137 MHz
Radiation pattern: Omni-directional
VSWR: 2.9:1, maximum
Airspeed: 350 mph
Airspeed: 350 KTAS at 25,000 ft
Altitude: 50,000 ft
Altitude: 50,000 ft
Connector: BNC (female)
Connector: BNC (female)
Mounting: Three-hole mounting pattern
Mounting: Four-hole internal
Material: Valox 420
Finish: Polyurethane enamel
Certification: TSO-C37d, TSO-C38d
RTCA DO-160D
CI 108 SERIES VHF BLADE / 118-153 MHZ
COMANT
The CI 108 is a high-speed blade antenna
constructed with solid polyurethane with
a white polyurethane finish that resists CI 139 VHF BLADE / 118-137 MHZ
Skydrol and rain erosion. Suitable for either
COMANT
top or bottom mounting. The CI 108-1 has
EDMO# CI-139
an extended VHF frequency band (138 MHz
MFR# CI 139
to 153 MHz). The CI 108-1-L is equipped
with leading edge protection. The CI 139 is a high-speed blade antenna
designed for large single- and twin-engine
aircraft. The antenna assembly is enclosed in
an aerodynamically shaped, injection molded
polyester glass shell with internal components
formed in place for mechanical integrity.
Featuring for mounting on top or bottom of
Weight: 2.5 lb
17
aircraft. The mounting hole pattern and RF
Height: 12 in connector location are compatible with Piper.
Frequency: 118–137 MHz (CI-108)
118–153 MHz (CI-108-1 & CI-108-1-L)
VSWR: 2.5:1, maximum
Airspeed 600 KTAS Weight: 1.25 lb
Altitude: 50,000 ft Height: 13 in
Connector: BNC (female) Frequency: 118–137 MHz
Mounting: Six-hole external VSWR: 2.9:1, maximum
Material: High-density polyurethane Airspeed: 350 KTAS at 25,000 ft
Finish: Polyurethane enamel Altitude: 50,000 ft
Certification: TSO-C37d, TSO-C38d Connector: BNC (female)
RTCA DO-160D Mounting: Four-hole internal
Material: Valox 420
Finish: Polyurethane enamel
Certification: TSO-C37d, TSO-C38d
EDMO# MFR# FREQUENCY DESCRIPTION RTCA DO-160D
CI-108 CI 108 118–137 MHz No leading edge protection
CI-108-L CI-108-L 118–137 MHz Leading edge protection
CI-108-1 CI 108-1 118–153 MHz Extended range
CI-108-1-L CI 108-1-L 118–153 MHz Extended range with leading edge
protection
CI 138 VHF BLADE / 118-137 MHZ CI 211 SERIES VHF BLADE / 118-154 MHZ
COMANT COMANT
EDMO# CI-138 The CI 211series antenna are high speed
MFR# CI 138 bent blade antennas designed as a low
The CI 138 is a high-speed blade antenna profile, top or bottom mount for large
designed for large single- and twin-engine twins and medium jet aircraft. Skydrol and
aircraft. The antenna assembly is enclosed rain erosion resistant. The CI 211-1 & CI
in an aerodynamically shaped, injection 211-16 have an extended frequency band
molded polyester glass shell with internal (118 MHz to 154 MHz). The CI 211-L and
components formed in place for mechanical CI 211-1L are equipped with leading edge
integrity. Featuring for mounting on top or protection. CI-211-16
bottom of aircraft. The mounting hole pattern
and RF connector location are compatible with
Beechcraft. The RF connector is offset from
the centerline of the antenna. Weight: 1.6 lb
Height: 8.25 in
Frequency: 118–137 MHz (CI-211)
118–153 MHZ (CI-211-1, CI-211-1-L)
Weight: 1 lb 118–154 MHZ (CI-211-16, CI-211-1L)
Height: 13 in VSWR: 2.9:1, maximum
Frequency: 118–137 MHz Airspeed: 573 KTAS
VSWR: 2.9:1, maximum Altitude: 50,000 ft
Airspeed: 350 KTAS at 25,000 ft Connector: BNC (female)
Altitude: 50,000 ft Mounting: Four-hole external
Connector: BNC (female) Material: High density polyurethane
Material: Valox 420 Finish: Polyurethane enamel
Finish: Polyurethane enamel Certification: TSO-C37d, TSO-C38d
RTCA DO-160D
Certification: TSO-C37d, TSO-C38d
RTCA DO-160D, DO-186A
EDMO# 072821-01
MFR# 121-072821-01
The 21-38 Series VHF antennas are
Weight: 1.25 lb low profile blade antennas for general
Height: 12.9 in airborne application and compatible with
Frequency: 118–137 MHz Search and Rescue (SAR) module option
VSWR: 2.9:1, maximum for the RT-7000 receiver. The 21-38
Airspeed: 350 KTAS at 25,000 ft antenna consists of a high performance
GRP blade, housing an RF matching assembly, mounted on aluminum alloy
Altitude: 35,000 ft
baseplate with a single RF female connector.
Connecter: BNC (female)
Mounting: Four-hole internal
Material: Valox 420
Finish: Polyurethane enamel Weight: 1.76 lb
Certification: TSO-C37d, TSO-C38d Dimensions: 16.06 x 3.50 x 8.26
RTCA DO-160D, DO-184A Frequency: 121.5, 156.525, 156.8, 243 MHz
VSWR: 3.0:1, maximum
Polarization: Vertical
Radiation pattern: Omni-directional
Power handling: Receive only
Connector: BNC female
AVT-4 VHF COMM BLADE / 118-137 MHZ CI 268-5 COMDAT VHF / 118-137 MHZ
R A MILLER COMANT
EDMO# AVT-4 EDMO# CI-268-5
MFR# AVT-4 MFR# CI 268-5
The AVT-4 is a broadband VHF communica- The CI 268-5 ComDat VHF antenna uses the
tions antenna that incorporates a low drag same radome as other multi-function ComDat
blade housing design for high strength and a antennas from Cobham. It has a super
radiating element encapsulated in rigid poly- tough, nickle-plated aluminum base plate
urethane foam. The housing is finished with a with integral Nitrile ‘O’ ring that can be used
Skydrol resistant white polyurethane paint and in pressurized applications. The CI 268-5
comes with mounting hardware and neoprene features a unique built-in notch filter that
mounting pad. allows installation in close proximity to GPS
antennas without co-sight interference.
17
Weight: 0.52 lb
Weight: 1.25 lb Height: 17 in
Height: 14.1 in Frequency: 118–137 MHz
Frequency: 118–137 MHz VSWR: 2.5:1, maximum
VSWR: 2.9:1, maximum Polarization: Vertical
Airspeed: 325 KTAS Radiation Pattern: Omnidirectional
Altitude: 35,000 ft Harmonic Rejection: 80 dB, typical
Connector: BNC (female) Altitude: 50,000 ft
Mounting: Four-hole external Connector: BNC (female)
Material: Molded glass-filled nylon Material: Molded glass filled nylon
Finish: Polyurethane enamel Finish: Polyurethane enamel (white)
Certification: TSO-C37d, TSO-C38d Certification: TSO-C37d, TSO-C38d
RTCA DO-160D RTCA DO-160D
CI 291 VHF COMM ROD / 118-137 MHZ CI 292-2 VHF COMM / 118-137 MHZ
COMANT COMANT
EDMO# CI-291 EDMO# CI-292-2
MFR# CI 291 MFR# CI 292-2
The CI 291 features a high strength The CI 292-2 is specifically designed to be
fiberglass “stick” radiator and die-cast mounted on the bottom of helicopters or
three-hole mount aluminum base. This underneath fixed-wing aircraft while pro-
antenna has been re-tested and updated viding excellent omni-directional coverage
to meet RTCA DO-160D environmental for all VHF communication frequencies.
requirements while offering 118 MHz to The CI 292-2 features a stainless steel,
137 MHz frequencies associated with DO bent whip radiator. This antenna has
186 MOPS. been updated to meet RTCA DO-160D
environmental requirements while offering
frequencies from 118 MHz to 137 MHz associated with DO 186 MOPS.
Weight: 0.6 lb
Weight: 0.5 lb
Height: 8.5 in
Height: 18.875 in
Frequency: 118–137 MHz
Frequency: 118–137 MHz
VSWR: 3.0:1, maximum
VSWR: 2.5:1, maximum
Polarization: Vertical
Polarization: Vertical
Radiation Pattern: Onmi-directional
Radiation Pattern: Omnidirection
Altitude: 50,000 ft
Altitude: 50,000 ft
Connector: BNC (female)
Connector: BNC (female)
Material: Cast housing / Stainless steel whip
Material: Cast housing / Fiberglass whip
Finish: Polyurethane enamel
Finish: Polyurethane enamel
Certification: TSO-C37d, TSO-C38d
Certification: TSO-C37d, TSO-C38d RTCA DO-160D
RTCA DO-160D
frequencies from 118 MHz to 137 MHz • The C70-3 is directly interchangeable
associated with DO 186 MOPS. with C598501-0104, VF 10-210, CI 109,
and CI 121 DM C70-1/A
• The C70-4 supersedes the C70-2 and
is specifically designed for bottom installations and designed with a higher
Weight: 0.5 lb (CI-292-1) degree of efficiency
Height: 20 in
• The C70-6 have an alternate mount pattern than the C70-1/A while other
Frequency: 118–137 MHz characteristics remain the same
VSWR: 2.5:1, maximum
Polarization: Vertical
Radiation Pattern: Onmi-directional
Weight: 12 oz
Airspeed: 250 KTAS
Height: 15 in, (C70-1/A, -6)
Altitude: 50,000 ft 20 in, (C70-3)
Connector: BNC (female) 8.9 in, (C70-4)
Material: Cast housing / Stainless steel whip Frequency range: 118–137 MHz
Finish: Polyurethane enamel VSWR: 2.0:1, (C70, -1/A, -3, -9)
2.5:1, (C70-4, -6)
Certification: TSO-C37d, TSO-C38d
RTCA DO-160D Polarization: Vertical
Radiation Pattern: Omni-directional in Azimuth
Airspeed: 400 MPH, (C70-1/A, -4, -6, -9)
250 MPH, (C70-3)
Weight: 1.6 lb
Frequency: 118–137 MHz (DM C60-1)
116–152 MHz (DM C60-171)
VSWR: 2.0:1, maximum
C63 SERIS VHF COMM Polarization: Vertical
HARRIS CORP. (D&M EDO)
Radiation pattern: Omni-directional
The C63 series VHF communication Altitude: Up to 35,000 ft
antennas are designed with a high Connector: C60-1: BNC (male)
mechanical strength and have machine ta- C60-171: BNC (male)
pered aluminum alloy radiating elements. Finish: White
The C63 series antennas are available in
Certification: TSO-C37d, TSO-C38d
both top mount designs and bent-back, RTCA DO-160D
low-profile bottom mount designs and are
well suited for helicopter installations.
• C63 series antennas are supplied with
a gasket and a double plate EDMO# MFR# FREQUENCY RANGE
DM C63-1/A DM C60-1 C60-1 118–137 MHz
DM C60-171 DMC60-17-1 116–152 MHz
Weight: 8 oz
Height: 8.1 in
Frequency: 118–137 MHz, (C63-1/A, C63-2/A)
118–174 MHz, (C63-3/A, C63-4/A)
VSWR: 2.0:1, (C63-1/A)
3.0:1, (C63-2)
3.5:1, (C63-3/A)
3.0:1, (C63-4/A)
Polarization: Vertical
Radiation pattern: Omni-directional
17
Finish: Polyurethane enamel
Certification: TSO-C37d, TSO-C38d
RTCA DO-160D
Weight: 1.25 lb
Frequency: VHF: 118–137 MHz
GPS: 1575.42 +/-3 MHz Weight: 0.6 lb
VSWR: VHF: 2.9:1, maximum Frequency: VHF: 118–137 MHz
GPS: 1.5:1, maximum GPS: 1575.42 MHz ±3 MHz
Polarization: VHF: Vertical VSWR: VHF: 2.5:1, maximum
GPS: RHCP GPS: 1.5:1, maximum
Radiation pattern: VHF: Omni-directional Polarization: VHF: Vertical
GPS: Hemispherical GPS: RHCP
Connector: VHF: BNC Radiation pattern: VHF: Omni-directional
GPS: TNC GPS: Hemispherical
Certification: TSO-C37d, TSO-C38d, TSO-C144 GPS preamplifier gain: 26.5–30.1 VDC
RTCA DO-160D GPS DC voltage: 4–24 VDC
GPS DC current: 40 mA typical, 60 mA maximum
Connector: VHF: BNC
GPS: TNC
Certification: TSO-C169 (class C,D,E,3,4,5,6), TSO-C144
CI 2480-201 VHF/GPS COMDAT / 118-137 MHZ RTCA DO-160D
COMANT
EDMO# CI-2480201
MFR# CI 2480-201
The CI 2480-201 VHF/GPS dual function,
ComDat antenna is designed for single engine
CI 2480-200 VHF/GPS COMDAT / 118-137 MHZ
aircraft and utilizes patented technology COMANT
to provide 80 dB of harmonic suppression EDMO# CI-2480200
allowing VHF and GPS functionality in radome MFR# CI 2480-200
without filters. It features a common tear drop The CI 2480-200 VHF/GPS dual function,
17
footprint which allows for drop-in replacement ComDat antenna is designed for single engine
installations. aircraft and utilizes patented technology
• Compatible with Garmin 17 dB GPS panel to provide 80 dB of harmonic suppression
mount receiver systems allowing VHF and GPS functionality in radome
without filters. It features a common tear drop
footprint which allows for drop-in replacement
installations.
Weight: 0.6 lb • FAA TSO-C144 certified for GPS and GPS
Frequency: VHF: 118–137 MHz WAAS class Gamma 1 equipment
GPS: 1575.42 MHz ±3 MHz
VSWR: VHF: 2.5:1, maximum
GPS: 2.5:1, maximum
Polarization: VHF: Vertical Weight: 0.6 lb
GPS: RHCP
Frequency: VHF: 118–137 MHz
Radiation pattern: VHF: Omni-directional GPS: 1575.42 MHz ±3 MHz
GPS: Hemispherical
VSWR: VHF: 2.5:1, maximum
GPS preamplifier gain: 17 dB ±3 dB GPS: 2.0:1, maximum
GPS DC voltage: 5 VDC Polarization: VHF: Vertical
GPS DC current: 20 mA, maximum GPS: RHCP
Connector: VHF: BNC Radiation pattern: VHF: Omni-directional
GPS: TNC GPS: Hemispherical
Certification: TSO-C37d, TSO-C38d GPS preamplifier gain: 26.5 dB
RTCA DO-160D GPS DC voltage: 5 VDC
17
XM Weather: LHCP
COMANT Radiation Pattern: VHF: Onmi-directional
EDMO# CI-2480216 GPS: Hemispherical
MFR# CI 2480-216 XM Weather: Hemispherical
Connectors: VHF: BNC
The CI 2480-216 VHF/XM ComDat is a GPS: TNC
multifunction antenna designed for single-en- XM: SMA
gine aircraft. It features a common tear drop Certification: TSO-C169, TSO-C144
footprint which allows for drop-in replacement RTCA DO-160D
installations. The antenna is ideal to add XM
weather data to a stand-alone VHF mounted
antenna.
• Patented VHF harmonic suppression EDMO# MFR# DESCRIPTION
also protects co-located standalone GPS CI-2728410 CI 2728-410 Lightning protected ComDat VHF/WAAS GPS/XM
antennas allowing for more antennas in less ACCESSORIES
total area
A272833 A272833 Lightning diverter strips
Weight: 0.7 lb
Frequency: VHF: 118–137 MHz
XM: 2332.5–2345 MHz
VSWR: VHF: 2.5:1, maximum
XM: 1.5:1, maximum
CI 295-300 TRI-BAND, SINGLE PORT SAR CI 295-200 DUAL BAND, DUAL PORT SAR
136-174 MHZ, 380-520 MHZ, & 764-870 MHZ 136-174 MHZ & 380-520 MHZ
COMANT COMANT
The CI 295-300 tri-band, single-port, EDMO# CI-295-200
airborne SAR antenna is designed to MFR# CI 295-200
provide frequency coverage to Search and The CI 295-200 public service antenna
Rescue teams using Motorola’s APX® provides the frequency coverage required
architecture. For maximum effectiveness to Search and Rescue teams around the
and connectivity, the CI 295-300 operates world. The dual port design offers maxi-
within P25 standards. This blade antenna mum effectiveness and flexibility allowing
is rated for helicopter and fixed-wing users to connect any radio set required for
turbine powered jet installations in the every mission. This blade antenna is rated
toughest vibration environments. The sin- for helicopter installations in the toughest
gle-port design reduces installation time vibration environments. It incorporates a
and saves space — providing room on the dual band and dual port design reducing
aircraft for other mission critical antennas installation time and saving space —
CI-295-300
or equipment vital to search and rescue operations. providing room on the aircraft for other
antennas or equipment vital to search and rescue operations. Applications
include helicopters and wing turbine powered aircraft.
Weight: 2 lb
Frequency: 136–174 MHz
380–520 MHz Weight: 2 lb
764–870 MHz
Frequency: 136–174 MHz
VSWR: 3.0:1, maximum 380–520 MHz
Polarization: Vertical VSWR: 3.0:1 maximum
Radiation pattern: Onmi-directional Polarization: Vertical
Connector: J1 TNC (F) Radiation pattern: Omni-directional
RF Power: 10 watts C.W. max
Connector: BNC: 136–174 MHz
TNC: 380–520 MHz
EDMO# MFR# COLOR Certification: RTCA DO-160G
CI-295-300 CI 295-300 White
CI-2953004 CI 295-300-4 Black
to Search and Rescue teams around the radome and holds no less than five different
world. The dual port design offers maxi- FAA TSO approvals. This antenna is designed
mum effectiveness and flexibility allowing to be used on fixed-wing turbine power aircraft
users to connect any radio set required and some light jets.
for every mission. The CI 295 is a blade
antenna rated for helicopter installations
in the toughest vibration environments.
It incorporates a dual band and dual port
design reducing installation time and Weight: 2.25 lb
saving space — providing room on the aircraft for other antennas or equipment Frequency: 116–156 MHz VHF Comm
960–1220 MHz DME
vital to search and rescue operations. 978 MHz UAT/ADS-B
1030–1090 MHz ATCRBS Transponder/Mode S
VSWR: 3.0:1 (116–156 MHz)
2.0:1 (960–1220 MHz)
Weight: 2 lb 1.5:1 (978 MHz)
Frequency: 136–174 MHz 1.7:1 (1030–1090 MHz)
764–870 MHz Polarization: Vertical
VSWR: 3.0:1 maximum Radiation pattern: Omni-directional
Polarization: Vertical Connector: J1 BNC (F) 116–156 MHz
Radiation pattern: Omni-directional J2 TNC (F) 960–1220 /1030–1090 MHz
Connector: BNC: 136–174 MHz Certification: TSO-C74d ATCRBS/Transponder, TSO-C66c DME
TNC: 764–870 MHz TSO-C112e ATCRBS/Mode S Transponder, TSO-C154c
UAT/ADS-B, TSO-C169a VHF Comm, RTCA DO-160G
Certification: RTCA DO-160D
17
This antenna offers a guard facility MFR# 12-190-310
whereby performance is maintained
at 121.5 MHz and 243 MHz when The 12-190-310 VHF/UHF Tuneable
switched to any frequency within spec- Antenna is a multi-band, low profile, blade
ified operating bands. At VHF and UHF antenna designed for operation in the fre-
frequencies, the capacitance between quency bands of 30 MHz to 88 MHz, 108
the top tube and ground is tuned out by a series of binary related PIN diode MHz to174 MHz, 225 MHz to 530 MHz, and
switched inductors in accordance with encoded data from the transmitter. This 960 MHz to 1220 MHz.
produces a high efficiency structure with a degree of selectivity particularly at
low FM frequencies.
Weight: 3.52 lb
Dimensions: 9.25 x 2.79 x 12.40 in.
Frequency: 30–88 MHz
108–174 MHz Weight: 1.82 lb
225–400 MHz Dimensions: 254 x 330.2 x 86.36 mm
VSWR: ≤ 2.5:1 30–88 MHz Frequency: 30–88 MHz
≤ 2.5:1 108–174 MHz 108–174 MHz
≤ 2.3:1 225–299.995 MHz 225–530 MHz
≤ 2.0:1 300–400 MHz 960–1220 MHz
Polarization: Vertical
*continued on next page
Power rating: 23 W
MFR# 19-450-10NP3
The 19-450 UHF and GPS SatCOM Antenna
is a combined UHF satellite communications
Weight: 3.5 lb and Global Positioning System (GPS) antenna.
Frequency: 116–152 MHz The antenna is low profile in construction and
225–400 MHz intended for airborne applications. The UHF
VSWR: 3.0:1, maximum section provides essentially hemispherical
Polarization: Vertical satellite communications coverage. The GPS
Radiation pattern: Omni-directional section provides nominal hemispherical cover-
RF Power: 50 watts continuous age in the GPS L1 and L2 frequency bands to
allow reception of microwave signals from a
Gain: -6 dBd, minimum
number of satellites.
Connector: VHF: BNC (female)
UHF: TNC (female)
Color: Black
Weight: 8.8 lb
Dimensions: 15.9W x 9H in.
UHF
Frequency: 240–400 MHz
VSWR: Low Angle: 2.5:1 max, High Angle: 2.0:1 max
RF power: 200W max
Connector: N type female
ANTENNA SOLUTIONS,
EDMO# 19-440-10
MFR# 19-440-10
The 19-440-10 V/UHF Broadband and
UHF SatCOM Antenna is a combined
NO MATTER THE AIRCRAFT:
broadband VHF/UHF communications
and UHF satellite communications
EDMO HAS YOU COVERED
antenna. The 19-440-10 comprises
two orthogonally mounted elements, Give us a call at 1.800.235.3300
a circularly polarized turnstile
antenna and a vertically polarized
or visit edmo.com for parts and
broadband fan monopole. Low angle pricing.
coverage is provided by the vertical
element, and high angle coverage is
provided by the circularly polarized element. In this way, essentially full hemi-
DEVOTED
spheric coverage is achieved for satellite communications.
Weight: 8.04 lb
Dimensions: 15.9 in. diameter, 8.25 in. height
Frequency: 30–88 MHz
108–152 MHz
225–400 MHz
High Angle: 240–400 MHz
VSWR: Low Angle 2.5:1 max
High Angle 2.0:1 max
Polarization: Low Angle: Essentially vertical when mounted vertically,
High Angle: Predominantly RHCP at zenith
Connector: Low Angle: TNC Type Female
High Angle: N Type Female
17
VHF/UHF/ELT / 30-80 MHZ, 108-152 MHZ,
& 240-400MHZ
COOPER ANTENNAS
EDMO# 21-50-339
MFR# 21-50-339
The 21-50-339 is an externally mount-
ed airborne VHF/UHF/ELT (Emergency
Locator Transmitter) antenna oper-
ating over the maritime and aviation
distress frequencies. The radiating
element comprises a hard drawn
alloy tube inserted into a molded
base which contains foamed-in place
matching circuits capable of handling
up to 25 Watts power. The method of
construction provides protection from
environmental conditions including
vibration, shock and temperature variations.
Weight: 2.20 lb
Dimensions: 8.35 in. length, 0.92 in. width
Frequency: 380–470 MHz
Weight: 0.5 lb VSWR: 2.5:1
Height: 6-1/8 in Polarization: Vertical
Frequency: 450–470 MHz Radiation pattern: Omni-directional
VSWR: 1.5:1 RF power: 25 W CW (maximum)
Polarization: Vertical Connector: BNC
Radiation pattern: Omni-directional Mounting: Single hole self-fixing
RF power: 30 watts
Altitude: 30,000 ft
Connector: BNC (female)
Mounting: Three-hole mounting pattern
Material: Aluminum alloy / fiberglass whip
CI 275 SERIES UHF RADIOTELEPHONE BLADE
Finish: Polyurethane enamel
403-512 MHZ
COMANT
The CI 275 series UHF radiotelephone
blade antennas are designed for high-per-
forming aircraft over a full frequency
CI 177-20 UHF RADIOTELEPHONE MINI WHIP range of 406 MHz to 512 MHz. The anten-
na is encased in a low height, low drag,
450-470 MHZ and lightweight molded body to ensure
COMANT high reliability.
EDMO# CI-177-20
MFR# CI 177-20
The CI 177-20 is a UHF radiotelephone mini whip
antenna particularly well suited to the harsh
environments experienced on the underside of the Weight: 8 oz
aircraft. Featuring a die-cast metal base and radiator Height: 3.5 in
17
17
resistance to vibration, rain erosion, and craft. The antenna is produced to Military Specifica-
cleaning solvents. tions MIL-A-5815 and MIL-A-5815/1. The antenna is
designed to operate at the extreme temperature range
of -65°F to 257°F with intermittent operation at 302°F
and can withstand a static load of 8 psi perpendicular
to the blade, with an ultimate of 12 psi. The antenna
Weight: 0.32 lb is protected by an anodic coating to prevent corrosion
Height: 3.25 in and the outside surfaces will resist particular erosion
Frequency: 806–960 MHz up to Mach 0.95.
VSWR: 1.75:1 @ 806–960 MHz
1.5:1 @1030–1090 MHz
Polarization: Vertical
Weight: 2 lb
Radiation pattern: Equivalent 1/4 wave stub
Frequency: 225–400 MHz
RF power: 100 watts (maximum)
VSWR: 2.0:1
Connector: BNC or TNC (specify)
Polarization: Vertical
Mounting: Four-hole mounting pattern
Radiation pattern: Omni-directional
Material: High density polyurethane enamel
RF power: 50 watts
Finish: White polyurethane enamel
Gain: -1 dBmp
Certification: TSO-C74a, Class 1A
RTCA DO-160C Airspeed: Mach 0.95
Altitude: 70,000 ft
Connector: N (female)
Weight: 0.18 lb
Weight: 0.15 lb Height: 7 in
Height: 4 in Frequency: 400–430 MHz
Frequency: 800–870 MHz VSWR: 1.8:1
VSWR: 1.5:1 Polarization: Vertical
Polarization: Vertical Radiation pattern: Equivalent to 1/4 wave stub
Radiation pattern: Typical of 1/4 wave stub RF power: 50 watts
RF power: 50 watts Connector: BNC (female)
Altitude: 25,000 ft Mounting: One-hole mounting
Connector: BNC Material: Nickel-plated brass
Mounting: One-hole mounting Finish: Tin-plated alloy
Material: Nickel-plated brass
Finish: Tin-nickel alloy
QUALITY
AV-15 UHF RADIOTELEPHONE STUB
450-470 MHZ
R A MILLER
EDMO# AV-15
MFR# AV-15
The AV-15 is a UHF radiotelephone stub antenna
used with lane mobile radio, and flight phone
bands. The durably constructed chrome-plated
phosphor bronze whip is set in a Teflon insulator
and the chrome-plated ball tip provides low-noise
static discharge. The antenna is design to operate
at speeds up to 350 mph and altitudes of 50,000
feet. It has a drag force of 0.75 lb @ 250 mph.
Weight:
Height:
2 lb
6.25 in
17
Frequency: 450–470 MHz
VSWR: 1.5:1
Polarization: Vertical
Radiation pattern: Omni-directional
RF power: 100 watts
Airspeed: 350 mph
Altitude: 50,000 ft
Connector: N (female)
Certification: TSO-C37d, TSO-C38d
NAVIGATION ANTENNAS
Weight: 1.4 lb
Height: 6 in
CI 120G/S VOR/LOC/GS BLADE - SINGLE Frequency: 108–118 MHz (VOR/LOC)
OUTPUT / 108-118 MHZ & 329-335 MHZ 329–335 MHz (GS)
VSWR: 6.0:1 (108–118 MHz)
COMANT 5.0:1 (329–335 MHz)
The CI 120G/S VOR/LOC/GS navigation Polarization: Horizontal
antenna set that provides optimum Radiation pattern: Omni-directional
VOR performance when used for area
RF power: Receive only
navigation. The antenna system is
Airspeed: 600 Knots TAS @ 25,000 ft
qualified for use on single, twin, jet and
helicopter aircraft, and also provides Altitude: 50,000 ft
glide slope reception capability. Connector: BNC / single output combiner
The complete set includes two blade Finish: Polyurethane enamel
antenna, each with single BNC connec- Certification: TSO-C34e, TSO-C36e, TSO-C40c
RTCA DO-192, RTCA DO-195, RTCA DO-196
tor output, two coax interconnect cables and a signal combiner with single BNC RTCA DO-160D
connector output providing for a single cable run to the avionics installation.
Weight: 1.4 lb
Height: 6 in CI 120-200 VOR/LOC/GS-L - DUAL OUTPUT
Frequency: 108–118 MHz (VOR/LOC) 108-118 MHZ
329–335 MHz (GS)
COMANT
VSWR: 6.0:1 (108–118 MHz)
5.0:1 (329–335 MHz) EDMO# 120200GS-L
Polarization: Horizontal
MFR# CI 120-200G/S-L
Radiation pattern: Omni-directional The CI 120-200 VOR/LOC/GS naviga-
RF power: Receive only tion antenna set provides optimum
VOR performance when used for area
Airspeed: 600 Knots TAS @ 25,000 ft
navigation. Antenna system qualified
Altitude: 50,000 ft for use on single engine, twin, jet, and
Connector: BNC / single output combiner helicopter aircraft. The blades have
Finish: Polyurethane enamel leading edge protection and come with
Certification: TSO-C34e, TSO-C36e, TSO-C40c a rubber gasket enabling mounting on
RTCA DO-192, RTCA DO-195, RTCA DO-196 curved vertical stabilizers. This antenna
RTCA DO-160D also provides glideslope capability.
Complete set includes a pair of two blades, each with single BNC connector
output, and two coax interconnect cables. The dual output signal combiner is
included (provides separate RF cable runs to the avionics installation for NAV1
EDMO# MFR# DESCRIPTION: and NAV2 receivers).
CI-120 G/S CI 120G/S CI 120G/S antenna
REPLACEMENT PARTS
CI-120 G/S CI 120G/S VOR/GS balanced loop antenna Weight: 1.4 lb
CI-120-1 CI 120-1 Single blade Height: 6 in
17
CI-120-1-L CI-120-1-L Single blade | Leading edge protection Frequency: 108–118 MHz (VOR/LOC)
329–335 MHz (GS)
VSWR: 6.0:1 (108–118 MHz)
5.0:1 (329–335 MHz)
Polarization: Horizontal
CI 120-200G/S VOR/LOC/GS BLADE - DUAL Radiation pattern: Omni-directional
17
ified for use on larger twin engine, jet,
DM N4-33-3 DM N4-33-3 N4-33 single blade antenna
and helicopter aircraft. The complete
set includes a pair of two blade anten- ACCESSORIES
nas, each with single BNC connector DM N4-33-5 DM N4-33-5 T cable for N4-33/C antenna system
outputs, two coax interchange cables,
and a single output signal combiner
providing for a single RF cable run to
the avionics installation to the NAV receivers. This heavy-duty set is ideal for
Beechcraft King Air aircraft and other similar aircraft.
N4-17/N VOR/LOC/GS BLADE - SINGLE
OUTPUT / 108-118 MHZ & 329-335.3 MHZ
HARRIS CORP. (D&M EDO)
Weight: 2.8 lb (complete system)
The N4-17 VOR/LOC/GS antenna is
Height: 6.5 in designed for general aviation, commer-
Frequency: 108–118 MHz (VOR/LOC) cial, and military aircraft that operate
329–335 MHz (GS)
up to Mach 1.0. DM N4-17 is designed
VSWR: 6.0:1 (108–118 MHz) to provide a low-cost, lightweight, and
3.5:1 (329–335 MHz)
low-drag antenna for state-of-the-art
Polarization: Horizontal
avionics. This antenna’s performance DM N4-171N
Radiation pattern: Onmi-directional parameters exceed environmental speci-
RF power: Receive only fications of MIL-5400 Class 3 equipment;
Finish: Polyurethane enamel therefore, it can be installed on single engine to jet engine aircraft.
Altitude: 50,000 ft
*continued on next page
The balanced loop design of the DM N4-17/N assures an omnidirectional radia- CI 259E VOR/LOC/GS ”V” DIPOLE
tion pattern at the horizon to obtain maximum signal for VOR and area naviga- 108-118 MHZ & 329-335 MHZ
tion which provides more receiving distance and reliable system performance.
COMANT
EDMO# CI-259-E
MFR# CI 259E
Weight: 1.32 lb The CI 259E VOR/LOC/GS “V” dipole
Frequency: 108–118 MHz (VOR/LOC) antenna has fixed element and is ideal for
329–335.3 MHz (GS) use on helicopter aircraft. It features an
VSWR: 5.0:1 integral ferrite balun and fixed element
Polarization: Horizontal construction which is designed to with-
Radiation pattern: Omni-directional (VOR/LOC) stand the severe low frequency vibration
Forward pointing (GS) environment experienced by typical
Gain: 0 ± 2 dB helicopter installations.
Power handling: Receive only
Connector: BNC (female)
Certification: TSO-C43e, TSO-C36e, TSO-C40c Weight: 0.35 lb
RTCA DO-138 AA5XXXXXHDX5
Height: 16 in
Frequency: 108–118 MHz
329–335 MHz
Polarization: Horizontal
EDMO# MFR# DESCRIPTION
Radiation pattern: Dipole
DM N4-17/N N4-17/N Two antenna elements, one coupler, two cables, and RF power: Receive only
two gaskets
Altitude: 50,000 ft
DM N4-171N N4-17-1/N Two antenna elements only
Connector: BNC
ACCESSORIES
Mounting: Two-hole mounting pattern
DM U235-1 DMU235-1 Gasket
Material: Delrin housing / poly ester glass laminate over
DM N4-17-2 N4-17-2 VOR/GS phasing coupler stainless steel radiators
Finish: Black housing / stainless steel whips
Certification: TSO-C34c, TSO-C36c, TSO-C40a
RTCA DO-192, RTCA DO-195, RTCA DO-196
RTCA DO-160D
N4-15 VOR/LOC BLADE - DUAL OUTPUT
108-122 MHZ
HARRIS CORP. (D&M EDO)
The N4-15 is a VOR/LOC, low drag, CI 215 VOR/LOC/GS ”V” DIPOLE
balanced loop antenna designed to be
used on high performance aircraft where
108-118 MHZ & 329-335 MHZ
aerodynamic drag and weight are crucial. COMANT
This antenna system provides increased The CI 215 is a VOR/LOC/GS “V” Dipole
range and reduced bearing error. The antenna with detachable elements
rugged metal edges provide erosion featuring two integrally molded mounting
resistance, and a flush glass fiber housing legs or “spacers” for increased strength.
ensure smooth airflow to reduce drag. The radiating elements are laminated with
Each assembly is foam filled for maximum polyester glass material for improved pre-
17
reliability. The N4-15 is primarily intended cipitation static protection. This antenna
for new aircraft installation or as a retrofit is interchangeable with the VOR/LOC/
when dual-antenna capability is required. GS antennas uses on most Cessna single
engine aircraft since 1980 including the
Cessna 182 and 210 models.
Weight: 5.5 lb
Frequency: 108–118 MHz
VSWR: 5:1, maximum Weight: 0.6 lb
Polarization: Horizontal Height: 23 in
Radiation pattern: Hemispherical Frequency: 108–118 MHz (VOR/LOC)
329–335 MHz (GS)
RF power: Receive only
VSWR: 3.0:1
Connector: TNC
Polarization: Horizonal
Certification: TSO-C40a
Radiation pattern: Dipole
RF power: Receiver only
Altitude: 50,000 ft
EDMO# MFR# DESCRIPTION Connector: BNC (female)
Mounting: Two-hole mounting pattern
DM N4-15 N4-15 DM N4-15 blade antenna
Material: Delin housing / Glass laminate whips
ACCESSORIES
Finish: Black housing / polyurethane enamel
DM U82-1 DM U82-1 Gasket for DM N4-15 antenna
17
RTCA DO-160
COMANT
The CI 158C is a VOR/LOC/GS “V” Dipole
antenna with detachable elements that
EDMO# MFR# DESCRIPTION mounts to the top of vertical stabilizers
of most single-engine, general aviation
CI-159C CI 159C CI 159C antenna aircraft. Similar in design to the CI 157P,
REPLACEMENT PARTS: the CI158C has an integral ferrite balun to
B15906 B15906 Single antenna element provide higher radiation efficiency. The de-
tachable elements allow for a significantly
smaller shipping and storage carton than
fixed element versions.
17
C20544 C20544 Power combiner
Frequency: 108–118 MHz (VOR/LOC)
328–336 MHz (GS)
VSWR: 2.0:1
Polarization: Horizontal
Radiation pattern: Omni-directional
N48 SERIES TOWEL BAR/VOR/LOC/GS -
RF power: Receiver only
Airspeed: 350 mph
SINGLE OUTPUT / 108-118 MHZ
HARRIS CORP. (D&M EDO)
Altitude: 50,000 ft
EDMO# DM N48-1
Connector: Threaded studs to accept transmission line assembly
with integral balun transformer (not included) MFR# N48-1
Certification: TSO-C40c The N48 series is a balanced loop
design assures an omni-directional ra-
diation pattern at the horizon to obtain
the maximum signal for standard VOR
EDMO# MFR# DESCRIPTION and area navigation systems installed
in lightweight aircraft, medium twins,
AV-532 AV-532 AV-532 antenna and helicopters operating up to 250
AV-532L AV-532L AV-532 antenna | Includes cable mph.
ACCESSORIES
15-97-3 15-97-3 Balun transmission line
*continued on next page
DM N48-3
The DM 48-3 antenna utilizes a phasing coupler which enables ease of installa- N4-4 TOWEL BAR/VOR/LOC/GS - SINGLE
tion in an access panel is not available or if the vertical stabilizer is too narrow OUTPUT / 108-122 MHZ
at the point of installation it makes is necessary to install the antenna with both
HARRIS CORP. (D&M EDO)
ends cable leads forward or aft.
The N4-4 navigation antenna system has
been designed to minimize bearing errors
when receiving VOR and ILS signals. It
Weight: 1.12 lb provides increased gain at the horizon,
Frequency: 108–118 MHz particularly during banks, over fuselage
VSWR: 5.0:1 mounted “deer horn” or “vee” antennas. It
Polarization: Horizontal can discriminate against vertically polar-
ized signals, and when properly installed
Radiation pattern: Omni-directional
on helicopters, it rejects rotor modulation
RF power: Receive only which results in better signal to noise
Connector: BNC (male) ratios with less errors. Constructed from
Finish: White poluurethane magnesium tubing, this antenna is light-
weight and rugged, and ideal for use on light planes and helicopters.
high sensitivity from all directions around the aircraft over the full VOR/Local-
izer Band. Because of the inherent characteristics of all balanced loop-type
antennas, vertically polarized, error-producing signals are rejected. The antenna ANTENNA SOLUTIONS,
also has excellent forward reception over the glide slope band (329 MHz to 335 NO MATTER THE AIRCRAFT.
MHz) and can be used for this function by adding a DMH22-1 coupler to the
system. EDMO HAS YOU COVERED.
As a class-leading aviation distributor, EDMO keeps
Weight: 4.2 lb
pace with the trends of the aerospace industry
Frequency: 108–118 MHz (VOR/LOC)
329–335 MHz (GS) We’re constantly updating our inventory with our
VSWR: 5.0:1 manufacturers’ latest products, so there’s a good
Airspeed: 250 mph
Connector: BNC
chance we will have what you’re looking for.
Mounting: 12-hole mounting pattern
Finish: White polyurethane Give us a call at 1.800.235.3300 or visit edmo.com
Certification: TSO-C40a
for parts and pricing.
17
Finish: White polyurethane enamel
transponders. Available with four or six- Certification: TSO-C66b, class 1
hole mounting and connector with open or RTCA DO-160C
closed path to ground. CI-1104030
Weight: 0.25 lb
Height: 2.25 in CI 105-16 DME/TRANSPONDER BLADE
Frequency: 960–1220 MHz 960-1220 MHZ
VSWR: 1.5:1 COMANT
Polarization: Vertical EDMO# CI-105-16
Radiation pattern: Omni-directional (Equiv. to 1/4 wave stub) MFR# CI 105-16
RF power: 3.0 Kw (peak), 100 watt (average) The CI 105-16 is a broadband and rugged
Altitude: 70,000 ft antenna designed for DME or transponder use.
Connector: C (female) The antenna assembly is designed specifically
Finish: Gloss white polyurethane enamel
as a replacement for the Honeywell Ben-
dix-King KA60 and offers an extended length,
Certification: TSO-C66c, TSO-C74c, TSO-C112 (class 1A)
RTCA DO-160D two-stud mounting that is found on the KA60.
It includes a BNC connector and covers 960
MHz to 1220 MHz frequencies and is rated to
400 Knots TAS at 70,000 feet.
Weight: 0.4 lb
Height: 3.31 in
Frequency: 960–1220 MHz Weight: 0.24 lb
VSWR: 1.5:1 (960–1220 MHz) Height: 3.23 in
1.3:1 (1025–1150 MHz)
Frequency: 960–1220 MHz
Polarization: Vertical
VSWR: 1.5:1 (960–1220 MHz)
Radiation pattern: Equivalent to 1/4 inch wave stub 1.3:1 (1025–1150 MHz)
RF power: 2.5 Kw Polarization: Vertical
Altitude: 70,000 ft Radiation pattern: Equivalent to 1/4 inch wave stub
Connector: BNC (female) RF power: 2.5 Kw
Mounting: four-hole flanged mounting Altitude: 70,000 ft
Finish: Polyurethane enamel Connector: BNC (female)
Certification: TSO-C66b, TSO-C74c Finish: Polyurethane enamel
RTCA DO-160C
Certification: TSO-C66b, TSO-C74c
RTCA DO-160C
17
acrylonitrile -styrene-acrylic (ASA) shell.
covers 960 MHz to 1220 MHz frequencies.
The antenna is supplied with cellular neo-
prene mounting pad and hardware.
Weight: 0.24 lb
Height: 3.31 in
Frequency: 960–1220 MHz
VSWR: 1.5:1 (960–1220 MHz) Weight: 3.2 oz
1.3:1 (1025–1150 MHz) Height: 3.4 in
Polarization: Vertical Frequency: 960–1220 MHz
Radiation pattern: Equivalent to 1/4 inch wave stub VSWR: 1.5:1
RF power: 2.5 Kw Polarization: Vertical
Altitude: 70,000 ft Radiation pattern: Omni-directional
Connector: BNC (female) RF power: 2.5 Kw (peak)
Mounting: four-hole flanged mounting Airspeed: 350 mph
Finish: Polyurethane enamel Altitude: 50,000 ft
Certification: TSO-C66b, TSO-C74c Connector: BNC (female)
RTCA DO-160C
Certification: TSO-C66c, TSO-C74c
Weight: 4 oz
Frequency: 960–1220 MHz
VSWR: < 1.7:1 (960–1220 MHz)
Weight: 3.2 oz < 1.5:1 (1000–1100 MHz)
Height: 3.4 in Polarization: Vertical
Frequency: 960–220 MHz Radiation pattern: Omni-directional
VSWR: 1.5:1 RF power: 2 Kw (peak)
Polarization: Vertical Gain: Equiv. to 1/4 wave stub
Radiation pattern: Omni-directional DC resistance: Open circuit
RF power: 2.5 Kw (peak) Aerodynamic drag: 0.5 lb @ sea level
Airspeed: 350 mph Certification: TSO-C66a, TSO-C74b
Altitude: 50,000 ft
Connector: BNC (female)
Certification: TSO-C66c, TSO-C74c
EDMO# MFR# MOUNTING / COLOR
DM NI70-1 NI70-1 Four-hole mounting | C (female) connector
DM NI70-2 NI70-2 Four-hole mounting | BNC (female) connector
MHz to 1,220 MHz. The anacrylonitrile-sty- tion against the intrusion of moisture, and
rene-acrylic (ASA) shell provides durability lightening protection to prevent damage
while its white color allows for maximum to electronic equipment. DM N150-2
performance without losses due to color
pigments or unseen dirt.
Weight: 4 oz
Height: 2.2 in
Weight: 0.2 lb Frequency: 960–1220 MHz
Frequency: 960–1220 MHz VSWR: < 1.7:1 (960–1220 MHz)
VSWR: 1.5:1 < 1.5:1 (1000–1100 MHz)
Polarization: Vertical Polarization: Vertical
Radiation pattern: Omni-directional Radiation pattern: Hemispherical
Connector: BNC (female) RF power: 100 watt (average), 3 Kw (peak)
Gain: 0 db (average at horizon)
Aero drag: 2 oz @ sea level (mach 0.5)
4.5 oz @ see level (mach 0.8)
Certification: TSO-C74 (ATC transponder), TSO-C66a (DME)
ARINC 532 E (ATC transponder), ARINC 521 D (DME)
17
MFR# NI24 RTCA DO-160G
The NI24 L-Band blade antenna is
designed and manufactured with the ra-
diating element encapsulated in an epoxy
dialectic body using a transfer-molded
process making them well suited for com- AT-741B/B RADAR BEACON / 960-1220 MHZ
mercial and military aircraft applications. R A MILLER
This economical and rugged construction EDMO# AT-741/B/B
provides a unified design while preventing MFR# AT-741B/B
moisture penetration in humid conditions.
This antenna can be used with DME, IFF, The AT-741B/B antenna is designed for
TACAN, TELEMETRY, and Beacon equipment. use with Radar Interrogation. Construct-
ed from an aluminum casting provides
protection from particle erosion of speeds
of up to Mach 2. This antenna is produced
Weight: 6 oz to Military Specifications MIL-DTL-25708
Frequency: 500–2,000 MHz and is qualified environmentally to Military
VSWR: Less than 5:1
Standard MIL-STD-810. The AT-741/B/B
can withstand a static load of 15 psi
Polarization: Vertical
perpendicular to the blade, operate at
RF power: 100 watt (average), 4 Kw (peak) altitudes of 100,000 ft, and has a Skydrol
Gain: 0.5 dB of match 1/4 stub (typical) resistant lusterless CARC black coating.
MFR# 104-12
The 104-12 transponder antenna is a mono-pole
antenna that has a top loaded sphere which creates a
factor of reliability and safety for a shorter antenna.
AV-22 TRANSPONDER STUB This antenna offers a voltage standing wave ratio of
1.2:1 at 1,090 MHz and less than 2:1 at 1,030 MHz
1030-1090 MHZ when connected with a 50Ω coaxial transmission line.
R A MILLER The 104 series antennas feature an omni-directional,
EDMO# AV-22 vertical-polarize radiation pattern when mounted to the
MFR# AV-22 underside of the aircraft.
The AV-22 is a stub type transponder antenna utilizing its
BNC connector for mounting to the airframe. It is designed
to operate at speed up to 350 mph and altitudes up to
50,000 feet. Frequency: 1030–1090 MHz
VSWR: 1.2:1 @ 1090 MHz
2:1 @ 1030 MHz
Polarization: Vertical
Radiation pattern: Omni-directional
Weight: 1 oz Connector: BNC (female)
Height: 3 in (maximum) Airspeed: 350 mph
Frequency: 1030–1090 MHz Altitude: 50,000 ft
VSWR: 1.3:1 Mounting: One-hole mounting
MARKER BEACON
ANTENNAS Certification: TSO-C35d, class A
RTCA DO-138
17
The CI 118-10 marker beacon is identical style” marker beacon antenna. The CI
to the CI 118 except it has a four-hole 118-1 is approved for medium to high per-
through mount configuration. This formance single, turbo-prop, or jet aircraft
model has been tested to tough DO-160D and provides simple external mounting.
environmental standards. DC grounded to DC grounded to minimize accumulation of precipitation static.
minimize accumulation of precipitation
static.
Weight: 0.5 lb
Hight: 2.4 in
Weight: 0.8 lb Frequency: 74 MHz
Height: 2.9 in VSWR: 1.5:1
Frequency: 75 MHz Polarization: Parallel to mounting plane
VSWR: 1.7:1 Radiation pattern: Primarily downward
Polarization: Parallel to the mounting plane RF power: Receive only
Radiation pattern: Primarily downward Altitude: 45,000 ft
RF power: Receive only Connector: BNC
Connector: BNC (female) Mounting: Four-hole external
Mounting: Four-hole external Finish: Polyurethane enamel
Material: Molded radome Certification: TSO-C35d, class A
Finish: White polyurethane paint RTCA DO-138
Weight: 6.25 oz
Height: 2.2 in
Frequency: 75 Hz Weight: 10 oz
VSWR: 1.4:1 Frequency: 74.75–75.25 MHz
RF power: Receive only VSWR: < 1.5:1 @ 75 MHz
Connector: BNC (female) < 5.0:1 (74.75–75.25 MHz)
Mounting: Four-hole mounting pattern Polarization: Horizontal
Certification: TSO-C35d RF power: Receive only
Gain: -9 dB
Connector: BNC (female): N27-3
Mounting: Six-hole mounting pattern
Material: Dielectric foam-filled fiberglass housing with metal
leading
N43 SERIES MARKER BEACON Certification: TSO-C35c
74.75-75.25 MHZ RTCA DO-108 (ABAAAAX)
HARRIS CORP. (D&M EDO) Military: Qualified to MIL-T-5422E
EDMO# DM N43-1
MFR# N43-1
The N43 series are low silhouette anten-
nas for use with 75 MHz marker beacon
receivers. When properly mounted on the
underside of an aircraft, the antennas pro-
vide a broad, single-lobed pattern directed
downward. The radiation is polarized par-
allel to the long dimension of the antenna.
Electrical elements of the antenna are completely sealed by foamed, in-place
resin within a plastic housing. As a result, the DM N43 is rugged enough for use
on all subsonic aircraft.
Weight: 1 lb
Frequency: 74.75–75.25 MHz
VSWR: < 5:1
< 2:1 @ 75 MHz
Polarization: Horizontal
Radiation pattern: Hemisphrical
RF power: Receive only
Gain: -10 dB
Drag: < 0.5 lb (sea level @ 250 mph)
Connector: BNC (female)
Mounting: Six-hole mounting pattern
Finish: White
Certification: TSO-C35c
RTCA DO-138 (JAJ XXX)
17
N27 SERIES MARKER BEACON
74.75-75.25 MHZ
HARRIS CORP. (D&M EDO)
EDMO# DM N27-3
MFR# N27-3
The N27 series marker beacon antennas
are rugged, lightweight antennas for
the reception of 75 MHz marker beacon
signals.
These low-drag antennas are designed If you don’t see the antenna you need here, it’s likely we
for simple external mounting and require no cutting of airframe structural
members. The largest hole required in the skin is for the connector. Moisture have it, or can order it in for you. You can also check out
proofing is assured by the dielectric foam filled, white polyester-fiberglass the newly improved edmo.com. With thousands of parts
radomes. These skydrol resistant housings are fitted with metal leading edges a click away, EDMO has you covered. And as always, our
for erosion protection. The DM N27 antennas are designed to meet the perfor- friendly customer service and sales staff is here for you.
mance specifications of antennas AT-134 and AT-536.
Call us at 1.800.235.3300.
CI 408-20 STANDALONE GPS / 1575.42 MHZ CI 401-220 STANDALONE GPS / 1575.42 MHZ
COMANT COMANT
EDMO# CI-408-20 EDMO# CI-401-220
MFR# CI 408-20 MFR# CI 401-220
The CI 408-20 is a standalone GPS antenna that The CI 401-220 is a standalone GPS
matches the popular circular footprint found on antenna that matches the standard ARINC
many general aviation and business jets. This 743A footprint found on many twin and
antenna meets the RTCA DO 160D Environmental business jets. It is designed to operative
test standards including direct effects lightening. with 26.5 dB panel mount GPS receivers.
The CI 408-20 is designed to operate with 26.5 dB This antenna meets the RTCA DO 160D
panel mount GPS receivers. Also, it is certified for Environmental test standard including
GPS and GPS WAAS Class Gamma 1 equipment direct effect lightning. The CI 401-220 is
and not compliant for GPS WAAS Class Gamma 2 certified for GPS and GPS WAAS Class
and 3 applications. Gamma 1 equipment and not compliant for GPS WAAS Class Gamma 2 and 3
applications.
Weight: 6.2 oz
Frequency: 1616–1626.5 MHz Weight: 6.2 oz
VSWR: 1.5:1 Frequency: 1575.42 MHz ± 3 MHz
Polarization: RHCP VSWR: 1.5:1
Radiation pattern: Hemispherical Polarization: RHCP
RF power: 6.5 watts (average) TX Radiation pattern: Hemispherical
Gain: +3 dBic @ zenith Gain: 25.5 DB to 31.5 dB
17
Lightening protection: DC grounded DC voltage: 4–24 VDC
Connector: TNC (female) DC current: 25 mA (typical) / 40 mA (maximum)
Mounting: Four-hole mounting pattern Noise figure: 3.8 dB
Finish: Gloss white Selectivity: -40 dB @ Satcom 1626.5 MHz
Certification: TSO-C159a Connector: TNC (female)
RTCA DO-160G Mounting: Four-hole mounting pattern
Finish: Glossy white
Certification: TSO-C144
RTCA DO-160D
Weight: 3.8 oz
Dimensions: 1.2 x 3.6 x 2.5 in Weight: 7.73 oz
Supply voltage: 11–33 VDC Frequency: 1575.42 MHz ± 10.23 MHz
Typical consumption: -0.1A @ 14V VSWR: 1.5:1
Temperature range: -40°C to 70°C Polarization: RHCP
Cooling requirement: No fan required Radiation pattern: Omni-directional
17
RTCA DO-160D
Mounting: Four-hole mounting pattern
Certification: TSO-C190
EDMO# CI-420-420
MFR# CI 420-420 DC current: 25 mA (typical) / 40 mA (maximum), (GPS)
25–55 mA (XM weather)
The CI 420-420 is a multifunction GPS Noise figure: 3.8 dB, maximum (GPS)
and XM Weather antenna designed to be 2.7 dB, maximum (XM weather)
compatible with 26.5 dB gain panel mount Connector: TNC (GPS)
GPS receivers. This antenna will match TNC (XM weather)
the popular tear-drop footprint found Mounting: Four-hole mounting pattern
on many general aviation aircraft and Finish: Gloss white
business jets. The CI 420-420 is certified Certification: TSO-C144
for FAA TSO-C144 for GPS and GPS RTCA DO-160D
• WAAS Class Gamma 1 / not compliant for GPS WAAS Class Gamma 2 & 3
Weight: 4.2 oz
Frequency: 1575.42 MHz (GPS)
2332.5–2345 MHz (XM weather)
VSWR: 1.5:1 Did you know?
Polarization: RHCP (GPS)
LHCP (XM weather) The newly improved edmo.com makes online shopping easier than
Radiation pattern: Hemispherical ever. With thousands of parts a click away, EDMO has you covered.
And as always, our friendly customer service is here for you. Call us at
Gain: 26.5–31.5 dB (GPS)
30–34 dB (XM weather) 1.800.235.3300
17
EDMO# CI-420-16
MFR# CI 420-1
MFR# CI 420-16
The CI 420-1 is a XM Weather antenna
The CI 420-16 ComDat high-gain, XM
with a SMA connector designed to operate
Weather antenna is designed for Head Up
with popular heads up XM weather data
Technologies (HUT) receivers with longer
systems. This antenna will match the
coax cable runs. This antenna will match
popular tear-drop footprint found on many
the popular tear-drop footprint found
general aviation aircraft and business jets.
on many general aviation aircraft and
business jets.
Weight: 4.2 oz
Frequency 2332.5–2345.0 MHz Weight: 4.2 oz
VSWR: 1.5:1 Frequency: 2333.5–2345 MHz
Polarization: LHCP VSWR: 1.5
Radiation pattern: Hemispherical Polarization: LHCP
Gain: 26–30 dB Radiation pattern: Hemispherical
DC voltage: 4.7 VDC (typical) / 5.5 VDC (maximum) Gain: 26–30 dB
DC current: 45 mA (typical) / 55 mA (maximum) DC voltage: 4–5.5 VDC
Noise figure: 1.1 dB (typical) DC current: 25–55 mA
Connector: SMA (female) Noise figure: 2.7 dB
Mounting: Four-hole mount pattern Connector: TNC (female)
*continued on next page
FOR ANTENNA
DC Supply: 2.8–28 VDC
IRIDIUM
Iridium Frequency:
Polarization:
1616.0–1626.5 MHz
1.5:1 SOLUTIONS
Gain: +5.0 dB
Axial Ratio: 2.0 dB Over the past 50 years, EDMO has developed relationships with
the aviation industry’s most trusted brands and now represents
more than 300 quality manufacturers. If you don’t see what
you need here, it’s likely we have it, or can order it in for you.
You can also check out the newly improved edmo.com. With
20-41 SERIES ACTIVE GPS / 1227.60 MHZ & thousands of parts a click away, EDMO has you covered.
1575.42 MHZ
COMANT And as always, our friendly customer service
EDMO# 20-4110P79 and sales staff is here for you.
MFR# 20-41-10P79 Call us at 1.800.235.3300.
The 20-41 Series of active GPS (Global
Positioning Satellite Systems) antennas,
with integrated Antenna Electronics (AE),
are designed to operate in the GPS L1 and
QUALITY
17
L2 bands. The antenna element operates
with nominal hemispherical coverage to
allow reception of signals from a number
of satellites. It consists of a dual micro
strip stacked patch radiating element
fed by a 90-degree hybrid arrangement
giving Right Hand Circular Polarization
(RHCP) reception, excellent symmetry and
cross-polar performance across the whole
bandwidth.
Weight: 0.21 KG
Height: 0.84 in.
Diameter: 3.5 in.
Frequency: L1: 1575.42 MHz ± 10.23 MHz
L2: 1227.60 MHz ± 10.23 MHz
VSWR: 1.5:1 Maximum2.0:1 (≥ 9.5 dB)
Polarization: RHCP
Primary power: 4.5 V to 12.5 V
Connector: TNC
Weight: 5 oz
From the company’s inception in 1971, the underlying principles
Height: 2.75 in
driving the business emphasized quality products and exceptional
Frequency: 4200–4400 MHz
service. EDMO maintains that vision while representing more than
VSWR: <2.0:1 (4200–4400 MHz)
<1.8:1 (4275–4325 MHz) 300 manufacturers and serving commercial, corporate, military,
Altitude: 1,000 ft to 70,000 ft and general aviation customers in the fixed-wing and rotor
Connector: TNC (female) markets. Give us a call or visit edmo.com for parts and pricing
Material: Metal
Certification: TSO-C87
Weight: 0.5 lb
Height: 14.5 in
Frequency: 148–174 MHz
VSWR: 2.5:1
Polarization pattern: Vertical
Weight: 8 oz
Radiation pattern: Omni-directional
Height: 14.5 in
RF power: 50 watts
Frequency: 148–174 MHz
Altitude: 30,000 ft
VSWR: 2.5:1
Connector: BNC (female)
Polarization: Vertical
Mounting: Four-hole mounting pattern
Radiation pattern: Omni-directional
Material: Die cast housing / fiberglass whip
Altitude: 30,000 ft
Finish: White polyurethane enamel
Connector: BNC (female)
Certification: TSO-C37b, TSO-C38b
Mounting: Three-hole mounting pattern RTCA DO-138
Material: Die cast housing / fiberglass whip
Finish: White polyurethane whip
Certification: TSO-C37b, TSO-C38b
RTCA DO-138
CI 292-4 EXTENDED BAND FM WHIP
136-174 MHZ
COMANT
EDMO# CI-292-4
CI 177-2 FM WHIP / 148-174 MHZ MFR# CI 292-4
COMANT The CI 292-4 is an extended band FM antenna.
EDMO# CI-177-2
Features a high strength die-cast aluminum base with
MFR# CI 177-2
tapered stainless steel, whip radiating element.
The CI 177-2 whip antenna is designed for use over the
public service FM Frequency band. The mounting uses
the popular 4-hole with the radiating element enclosed
17
in a high strength tapered glass laminate housing.
Weight: 0.6 lb
Height: 14.5 in
Frequency: 136–174 MHz
138–174 MHz
VSWR: 3.0:1 (136–174 MHz)
Weight: 0.50 lb 2.5:1 (138–174 MHz)
Height: 14.5 in Polarization: Vertical
Frequency: 138–174 MHz Radiation pattern: Omni-directional
VSWR: 2.5:1 Altitude: 50,000 ft
Polarization: Vertical Connector: BNC (female)
Radiation pattern: Omni-directional Material: Die cast housing / stainless steel whip
RF Power: 50 watts Finish: White polyurethane enamel
Altitude: 30,000 ft Certification: TSO-C37c (class 1), TSO-C38c
RTCA DO-160B
Weight: 0.6 lb
Weight: 8 oz Height: 9.5 in
Height: 14.5 in Frequency: 136–174 MHz
Frequency: 138–174 MHz 138–174 MHz
VSWR: 3.0:1 VSWR: 3.0:1
Polarization: Vertical Antenna gain: 2.5 dB
Radiation pattern: Omni-directional Polarization: Vertical
RF power: 50 watts Radiation pattern: Omni-directional
Altitude: 30,000 ft Altitude: 50,000 ft
Connector: BNC (female) Connector: BNC (female)
Mounting: Three-mount mounting pattern Material: Die cast housing / stainless steel whip
Material: Die cast housig / fiberglass whip Finish: White polyurethane enamel
Finish: White polyurethane enamel Certification: TSO-C37c (class 1), TSO-C38c
RTCA DO-160B
Certification: TSO-C37b, TSO-C38b
RTCA DO-138
Weight: 8 oz
Height: 5.5 in (max) with 20.5 in stainless steel whip
Frequency: 88–108 MHz
540–1600 KHz
Weight: 8 oz
VSWR: 3.5:1 Maximum @ 98 MHz Mid-band
Height: 15.3 in 30:1 Maximum @ 88 & 108 MHz Edges
Frequency: 138–174 MHz Polarization: Slant / linear
VSWR: 3.0:1 Radiation pattern: Omni-directional (receive only)
Polarization: Vertical RF power: 50 watts
Radiation pattern: Omni-directional Connector: BNC (female)
RF power: 50 watts Mounting: Four-hole mounting pattern:
Altitude: 30,000 ft Material: Cast zinc housing / stainless steel whip
Connector: BNC (female) Finish: White polyurethane enamel
Material: Die cast / fiberglass whip
Finish: White polyurethane enamel
Certification: TSO-C37b, TSO-C38b
RTCA DO-138
VEHICLE ANTENNAS
with unknown related rotor frequencies.
It is also qualified to perform as a 406
MHz ELT antenna, and is well suited for
this function on higher speed, fixed wing
aircraft.
AV-5 BASE STATION / 118-137 MHZ
R A MILLER
The AV-5 is an economical Ground Plane
Weight:: 1.8 lb base station antenna. It is ideally suited
Frequency: 136 MHz to 174 MHz for use with Unicom transceivers and is
380 MHz to 406 MHz field tunable to optimize VSWR at desired
406 MHz to 406.1 MHz
406.1MHz to 520 MHz frequency. Durably constructed of high
760 MHz to 870 MHz quality materials for a long operational
VSWR: 1.5:1 Max. (406.0-406.1 MHz) life, the antenna is designed to withstand
3.0:1 Max. (all other bands) windspeeds up to 100 mph.
Polarization: Vertical
Radiation pattern: Omni-directional
Connector: BNC female
Weight: 1 lb
EDMO# MFR# DESCRIPTION Height: 34 in
AV-925 AV-925 AV-925 Blade Antenna Frequency: 118–137 MHz (field tunable: 110–512 MHz)
ACCESSORIES VSWR: 1.5:1
AV-926 AV-926 Antenna triplexer | 136-174, 380-520 & 760-870 MHz Polarization: Vertical
Radiation pattern: Omni-directional
RF power: 100 watts
Connector: SO-239
17
MFR# AV-924 ACCESSORIES
The AV-924 antenna is designed for use AV-6 AV-6 Cable assembly | Includes 50-feet of RG-58/U low loss
transmission line, PL-259 connector and BNC male
with airborne FM transceivers in first re- connector
sponder type aircraft. This antenna offers
an ideal solution for multiband transceiv-
ers and covers frequency ranges from 136
to 174 MHz, 380 to 520 MHz, and 760 to
870 MHz. It meets the requirements of
DO-160G, section 8, Category U for robust AV-1 BASE STATION / 118-137 MHZ
vibration and qualified for helicopter R A MILLER
installations with unknown related rotor frequencies. The AV-1 is a base station antenna for communi-
cations with ground vehicles and aircraft. It has
heavy-duty construction with 3/8-inch diameter
Frequency: 136–174 MHz aluminum radials, and a 1-inch diameter alumi-
380–570 MHz num tube radiator. It mounts easily to a one-inch
760–870 MHz diameter pipe or a 1-1/4 inch O.D. tube with a set
VSWR: 3.0:1, maximum of locking set screws. A built-in gap-type lighting
Polarization: Vertical arrestor is incorporated into the design. The
Radiation pattern: Omni-directional AV-1 requires no additional tuning and is able to
withstand windspeeds up 100 mph.
RF power: 10 watts VHF
10 watts UHF
*continued on next page
Weight: 0.25 lb
Height: 26 in @ lowest frequency
Frequency: 118–940 MHz
VSWR: < 1.5:1
Polarization: Vertical
RF power: 150 watts
Gain: 0 dB
Mounting: Mates with all 1-1/8-inch - 18 thread mounts, including
3/4-inch mounts
Material: Stainless steel
Base style: NMO style
17
BMAX7603S MOBILE ROD / 760-870 MHZ
TALLEY COMMUNICATIONS
The BMAX7603S is a open coil rod mobile antenna
with an operating frequency of 760 MHz to 870 MHz.
A rugged molded polymer base, plated spring-loaded
contact pin and 0.100-inch diameter stainless-steel whip
provides for long-lasting, trouble-free operation.
• Molded polymer base
• Ready to install: no cutting required
• Spring-loaded, gold-plated contact pin If you don’t see what you need here, it’s likely we have it, or can
order it in for you. You can also check out the newly improved
edmo.com. With thousands of parts a click away, EDMO has you
covered. And as always, our friendly customer service and sales
staff is here for you. Call us at 1.800.235.3300.
Weight: 0.5 lb
Height: 14 in @ lowest frequency
Weight: 0.5 lb
Weight: 0.2 lb
Height: 3.4 in
Height: 0.88 in
Frequency: 2400–2500 MHz
5172–5820 MHz Frequency: 75 MHz ± 0.15 MHz
VSWR: 1.6:1 VSWR: 1.5:1
Polarization: Vertical Isolation: 20 dB
Radiation pattern: Equivalent of 1/4-inch wave stub Insertion loss: 0.5 dB
RF power: 100 watts Connector: BNC (female)
Efficiency: 90% Mounting: Internal
Connector: TNC (female) Material: Die cast aluminum
Mounting: Six-hole mounting pattern Finish: Aluminum
Finish: White polyurethane paint Certification: TSO-C35d
Certification: RTCA DO-160C
CI 502 DUAL VOR COUPLER / 108-118 MHZ CI 1125 DUAL VOR/ DUAL GS DIPLEXER
COMANT 108-118 MHZ & 329-335 MHZ
EDMO# CI-502 COMANT
MFR# CI 502
The CI 1125 Dual VOR/Dual GS diplexer
The CI 502 Dual VOR coupler allows the featuring diplexer circuitry in a small
simultaneous use of two VOR receivers die-stamped housing for high reliability.
from one VOR antenna. The compact Provides operation between two VOR
design provides for easy installation. receivers and two GS receivers from the
same VOR/GS antenna.
Weight: 0.2 lb
Weight: 0.25 lb Height: 0.75 in
Height: 0.88 in Frequency: 108–118 MHz (VOR)
329–335 MHz (GS)
Frequency: 108–118 MHz
VSWR: 1.5:1
VSWR: 1.5:1
Insolation: 20 dB between VOR/GS
Isolation: 20 dB 18 dB between VOR ports
Connector: BNC (female) 18 dB between GS ports
Mounting: Internal Insertion loss: 3.6 dB (maximum)
Material: Die cast aluminum Connector: BNC or TNC
Certification: TSO-C34c, TSO-C36c, TSO-C40a Mounting: Internal
Material: Aluminum
Certification: TSO-C34c,TSO-C36c, TSO-C40a
17
Port 2: NAV/LOC/GS from one VOR/GS antenna. The compact
Port3: NAV/LOC/GS design provides for easy installation.
VSWR: 1.4:1
RF power: Receive only
Isolation: >22 dB
Insertion loss: < 0.6 dB
Connector: BNC (female)
Certification: TSO-C34e, TSO-C36e, TSO-C40e Weight: 0.20 lb
Height: 0.88 in
Frequency: 108–118 MHz (VOR)
329–335 MHz (GS)
Isolation: 20 dB between ports
Weight: 0.5 lb
Height: 0.85 in Weight: 3.5 oz
Frequency: 108–120 MHz (VOR) Frequency: 108–118 MHz (VOR/LOC)
325–340 MHz (GS) 328–336 MHz (GS)
VSWR: 1.5:1 VSWR: 1.4:1
Isolation: 40 dB between frequencies Isolation: 38 dB
Insertion loss: 0.5 dB (0.3 dB typical) Insertion loss: 38 dB
Connector: TNC (female) Connector: 3 BNC (females)
Material: Die cast aluminum Certification: TSO-C34e, TSO-C36e, TSO-C40c9
Finish: Flat grey epoxy paint
Weight: 0.2 lb
17
Height: 0.88 in
Weight: 6.72 oz
Frequency: 108–118 MHz (VOR)
329–335 MHz (GS) Frequency: Port 1: antenna
Port 2: 136–174 MHz (radio)
VSWR: 1.5:1 Port 3: 380–870 MHz (radio)
Isolation: 20 dB VSWR: 1.3:1
Insertion loss: 0.5 dB RF power: 10 watts (VHF)
Mounting: Internal 5 watts (UFH)
Material: Die cast aluminum Isolation: >35 dB
Certification: TSO-C34c, TSO-C36c, TSO-C40a Insertion loss: < 0.5 dB
Connector: TNC (female)
H69-1 DUAL VOR/ DUAL GS QUADRAPLEXER H24-1 DUAL GS DIPLEXER / 108-118 MHZ &
108-118 MHZ & 329-335.3 MHZ 329-335.3 MHZ
HARRIS CORP. (D&M EDO) HARRIS CORP. (D&M EDO)
EDMO# DM H69-1 EDMO# DM H24-1
MFR# H96-1 MFR# H24-1
The H69-1 quadraplexer provides in one The H24-1 Dual Glide Slope Diplexer allows
small lightweight component the ability operation of two glide slope receivers from
to operate dual NAVs and dual glide slope one glide slope antenna. The unit is housed in
receivers from one VOR antenna. The H69- an aluminum case and all circuit components
1 is housed in an aluminum case and all fully encapsulated for vibration protection as
circuit components are fully encapsulated well as waterproof protection.
for vibration and waterproof protection. • Instrument landing system redundant
• Allows operation of dual NAVS and couplers
dual GS receivers from one VOR
antenna • Minimum insertion loss
• Reduced insertion loss and provides
signal isolation
Weight: 4 oz
Frequency: 329–335.3 MHz
108–118 MHz
Weight: 4 oz
VSWR: < 1.5:1 dB (VOR/LOC)
Frequency: 108–118 MHz (VOR) < 1.5:1 dB (Glide Slope)
329–335.3 MHz (GS)
Impedance: 50Ω
VSWR: 2.0:1
Isolation: < 20 dB (VOR/LOC to VOR/LOC)
RF power: Receiver only < 40 db (VOR/LOC to VOR/LOC)
Insertion loss: 1 dB (VOR) < 14 dB (Glide slope from VOR/LOC)
1 dB (GS) < 14 dB (marker beacon to marker beacon)
Connector: BNC (male) Insertion loss: 0.5 dB, max (glide slope port H22-1 & H23-1)
0.5 dB, max (VOR/LOC port H22-1)
Certification: MIL-E-5400 class II vibration 1A 3.5 dB, max including power split (VOR/LOC ports, H21-1,
H23-1 and glide slope ports H24-1)
3.6 dB, max (Marker beacon ports, H21-1)
RF power: Receive only
Connector: BNC (female)
H23-1 DUAL VOR/ SINGLE GS TRIPLEXER Material: Aluminum
108-118 MHZ & 329-335.3 MHZ Certification: TSO-C34c, TSO-C35d, TSO-C36d, TSO-C40a
HARRIS CORP. (D&M EDO)
EDMO# DM H23-1
MFR# H23-1
The H23-1 dual VOR and single GS
triplexer permits operation of two NAV H21-1 DUAL VOR OR DUAL MARKER BEACON
and one glides slope receiver from one DIPLEXER / 108-118 MHZ & 74.5-75.25 MHZ
VOR/GS antenna. The unit is housed in an HARRIS CORP. (D&M EDO)
aluminum case and all circuit components EDMO# DM H21-1
fully encapsulated for vibration protection MFR# H21-1
as well as waterproof protection.
17
The H21-1 dual VOR or dual marker beacon
• Instrument landing system redundant diplexer will permit operation of two NAV
couplers receivers form one VOR antenna or two
• Minimum insertion loss marker beacon receivers from one marker
beacon antenna. The unit is housed in an
aluminum case and all circuit components
fully encapsulated for vibration protection
as well as waterproof protection.
Weight: 4 oz
Frequency: 108–118 MHz (VOR)
329–335.3 MHz (GS)
VSWR: 1.5:1
RF power: Receive only Weight: 4 oz
Connector: BNC (female) Frequency: 108–118 MHz (VOR)
Material: Aluminum 74.5–75.25 MHz (marker beacon)
Certification: TSO-C34c, TSO-C35d, TSO-C36d, TSO-C40a VSWR: 1.5:1 (VOR)
2.0:1 (marker beacon)
RF power: Receive only
Connector: BNC (female)
Material: Aluminum
Certification: TSO-C34c, TSO-C35d, TSO-C36d, TSO-C40a
Weight: 0.1 lb
Weight: 3.2 oz
Height: 0.97 in
Frequency: 108–118 MHz(VOR)
328–336 MHz (GS) Frequency: 108–118 MHz (VOR)
329–335 MHz (GS)
VSWR: 1.5:1
VSWR: 1.5:1
Isolation: 20 dB
Isolation: 20 dB
Insertion loss: 3.5 dB
Insertion loss: 1.0 dB
Connector: BNC (female)
Amplitude balance: ±0.5 dB
Certification: TSO-C34e, TSo-C36e, TSO-C40a
Phase: 180 degrees ± 5 degrees
Power split: 3 dB
Connector: BNC (female)
Mounting: internal
Material: Aluminum
AV-547 VOR/LOC SPLITTER / 108-118 MHZ COAXIAL POWER SPLITTER / 5-500 MHZ
R A MILLER EDMO# ZFSC-2-1B
EDMO# AV-547 MFR# ZFSC-2-1B+
MFR# AV-547 The ZFSC-2-1B is a coaxial power splitter/
The AV-547 splitter feeds two navigation combiner for VHF/UHF, instrumentation,
receivers from one antenna. The circuitry and communication systems. This part
is enclosed in a durable, lightweight alu- comes with a bracket and BNC connec-
minum housing for superior mechanical tors. This splitter/combiner features
and environmental stability. The splitter wideband 5 MHz to 500 MHz frequency
operates at altitudes of up to 50,000 ft. range, low insertion loss, excellent isola-
tion, good VSWR of 1:2:1, and a rugged
• Direct replacement for the CI 502
shielded case. Includes the bracket option
Weight: 70 grams
Weight: 3.5 oz Dimensions: 1 x 1.25 x 0.75 in (with mounting bracket)
Frequency: 108–118 MHz Frequency: 5–500 MHz
VSWR: 1.4:1 VSWR: 1.2:1
RF power: Receiver only Isolation: 0.1 (typical)
Isolation: 30 dB Insertion loss: 0.3 dB (typical)
Insertion loss: 3.5 dB Power input: 1 watt, maximum (as splitter)
Connector: 3 BNC (female) Internal dissipation: 0.125 watt, maximum
Certification: TSO-C34e, TSO-C36e, TSO-C40c Temperature range: -55°C to 100°C
Weight: 8 oz
Dimensions: 3.69 x 2.36 x 0.88 in
17
Frequency: 118–136 MHz
VSWR: 1.2:1
RF power: 25 watts
Ports: Antenna
XMT/RCV No. 1
XMT/RCV No. 2
DC voltage: AV-590: 12–15 VDC @ 60 mA max.
AV-590(28): 20–30 VDC @ 60 mA max.
Connector: BNC (female)
Cable: 36 inch, 4 conductor
WITH 50 YEARS OF
EXPERIENCE IN THE INDUSTRY,
EDMO KNOWS QUALITY.
SG260-430 SG260-450 SG175-525 SG090-400
EDMO Distributors is an independent wholesale distributor
of aircraft electronics and accessories with a central office
located in Spokane, Washington and a product warehouse Keep sealant application simple and tidy with these precise, efficient sealing
templates. Each template is customized to fit select antennas. Each two-pieced
located in Nashville, Tennessee. template consists of an inner part and outer part; the inner component adheres
to the base of the of the antenna and the outer template is place on the body of
Give us a call at 1.800.235.3300 or visit edmo.com for the aircraft surrounding the antenna. Sealant is then applied to gap between the
parts and pricing. templates which are later removed after the sealant has cured.
SG260-430 SG260-430
5366-145L, S65-5366-168L, S65-5366-4 Series,
AV-741, DM N150 Series, DM N170 Series
CI 121, AV-10, CI 122, AV-14, CI 177, AV-17, CI 177-
NEED IT.
1, CI 177-13, CI 177-3, CI 177-20, CI 291, CI 292-1,
CI 292-2, CI 292-3, CI 292-4, CI 222, CI 222-1, CI EDMO has developed robust relationships with the aviation
177-4, CI 4510, CI 317, CI 3171, CI 405 industry’s most trusted brands by connecting them to the
SG260-450 SG260-450 CI-248-5, CI-248-30, CI-248-180, CI-2480-100,
CI-2480-101, CI-2480-200, CI-2480-201, CI-2480- right customers. EDMO carries a comprehensive range of
204, CI-2480-206, CI-2480-300, CI-2480-301,
CI-2480-304, CI-2480-400, CI-2480-401, CI-420-10,
products including aircraft electronics, installation and
CI-420-16, CI-420-220, CI-420-221, CI-420-224, bench supplies, wire and cable, tooling, test equipment,
CI-420-230, CI-420-420, CI-420-421, 2.70-4.40,
110-338 tactical communication solutions, pilot supplies, and
ground support equipment.
Give us a call at 1.800.235.3300 or visit
edmo.com for parts and pricing.
B-ANT BASE STATION SYSTEM
ICOM AMERICA INC
EDMO# B-ANT
MFR# B ANT A200
The B-ANT antenna system works with
LEGENDARY
aviation base station radios with a
frequency range of 118.8 MHz to 126.8
MHz. This antenna system includes a
50-foot RG-213 cable with PL-259 con-
nectors at each end, base station antenna
kit collar, set screws, ground radials, bulk-
head adapter, lock washer and hex nut,
base station bracket, mounting clamps
and phasing coil.
17
NMO mount which has a TNC crimp
connector at 17-inch RG58A/U cable.
It features a gold-plated contact for
superior conductivity and a silver-sol-
dered ground lug to eliminates RF
noise or static.
Weight: 0.5 lb
Length: 17 ft
Color: Brass
Hole size: 3/4 in
Cable type: RG58A/U
Connector type: Sold separately
Connector installed: No
ANTI-COLLISION STROBES,
BEACONS & LIGHTS Weight:
Dimensions:
71987: 0.14 lb
71985 : 0.48 lb
71987: 1.18 X 3.17 X 1.42 in.
71985: 1.38 X 3.93 X 3.10 in.
COMETFLASH ANTI-COLLISION STROBE Voltage: 28 VDC
LED color: Aviation white
WHELEN ENGINEERING CO, INC
Compatibility: Model 7198517 flasher/power supply assembly
The HRCFA Series self-contained CometFlash®
strobe anti-collision lights are unique polycarbon-
ate optic lens and reflector designs that redirect
stray light rays into the horizontal plane to provide
360° of uniform lighting. Designed for use as a EDMO# MFR# DESCRIPTION
direct replacement for any rotating beacon that 7198700 01-0771987-00 LED strobe light assembly
uses a 3-3/4 inch diameter mounting hole. May be 7198517 01-0771985-17 Flasher power supply assembly
installed in the vertical fin or the fuselage (requires
the A440 mounting adapter). Operates in 10 - 30
VDC.
71485-50
7050901
EDMO# MFR# DESCRITPTION
7050901 01-0770509-01 White halogen strobe | 14V 70905 SERIES LED FLASHING ANTI-COLLISION
ACCESSORIES
BEACON
WHELEN ENGINEERING CO, INC
5043300 5043300 Lamp assembly | 14V EDMO# 7090504
MFR# 01-0770905-04
The 70905 series anti-collision beacon is a
self-contained LED flashing light assembly
designed to replace existing remote mount-
7198 SERIES LED STROBE ed strobe lights. With high-quality long-last-
WHELEN ENGINEERING CO, INC ing modern LED technology, a power supply
The Model 7198700 LED strobe light is is no longer required.
designed to replace the legacy strobe light • Long life solid-state LED lights
(01-0770818-00) system on Cessna single • Vibration resistant
engine restart aircraft 1996 & newer. FAA/
PMA Approved. • No EMI or RFI
7198700
18
I, 150 effective Cd. These anti-collision
lights replace Whelen’s HRCFA/ SACF
style strobe units, rotating beacons, and
model A470(A). Ships with 12 long flying WITH 50 YEARS OF
leads, available in 28 V only.
EXPERIENCE IN THE INDUSTRY,
EDMO KNOWS QUALITY.
7141001
90088 SERIES QUARTZ HALOGEN FLASHING 71110 SERIES LED ANTI-COLLISION/ POSITION
ANTI-COLLISION LIGHTS LIGHT ASSEMBLY
WHELEN ENGINEERING CO, INC WHELEN ENGINEERING CO, INC
Self-contained, 150 watt, quartz halogen EDMO# 7111008
flashing anti-collision light. Factory in- MFR# 01-0771110-08F
stalled on Lear 31, Falcon 900 and Cessna Model 71110 Series is a wing tip mounted
Citation X. It is also a direct replacement Strobe anti-collision/position light assem-
for oscillating beacons on most corporate bly utilizing LED’s for the forward position
aircraft. lights. The LED’s provide a significant re-
duction in current draw over conventional
position light bulbs. The Strobe light lens
assembly is radio shielded for maximum
Voltage: 28 VDC (operation from 22-32 VDC) EMI/RFI protection. Direct replacement
Current: 0.56 Amps (Exact Footprint) for the Whelen Model
Pulse: 3 Amps A650PG/PR series without replacing the
Flashrate: 45± 5 FPM current strobe power supply. Navigation
Color: Aviation red light portion is wired with flying leads. RFI shielded
Weight: 0.05 lb
EDMO# MFR# MOUNTING SPECIFICATION
Voltage: 28 VDC
7900883 01-0790088-03 5-hole lower Current: 0.25 amps
7900884 01-0790088-04 5-hole upper LED Color: Aviation red
18
Voltage: 28 VDC
Current: 0.53 Amps avg.
EDMO# MFR# VOLTAGE MOUNT COLOR 2.8 Amps Peak @ 0.25 sec
ORION 500
OR5001V 01-0771774V01 12 VDC Vertical tail White
OR5002V 01-0771774V02C 28 VDC Vertical tail White EDMO# MFR# COLOR
ORION 650 7117001 01-0771170-01 Green
7117002 07-0771170-02 Red
OR6501G 01-0790725-01 12 VDC Wingtip Green
OR6501R 01-0790725-02 12 VDC Wingtip Red
OR6502G 01-0790725-11 28 VDC Wingtip Green
OR6502R 01-0790725-12 28 VDC Wingtip Red
ACCESSORIES
4971801A30 68-4971801A30 Clear lens for Orion 650 Series
7110503
Weight: 0.25 lb
Dimensions: 2.7 in
Voltage: 28 VDC
Current: 0.25 Amps
W1285PG28 W1285PR28
Wing tip position light which uses a 26-watt incandescent lamp. It is a direct
EDMO# MFR# LED COLOR replacement for the brand G A1285 Series. Manufactured of non-magnetic
7110503 01-0771105-03A Green materials.
7110504 01-0771105-04A Red
RFI SHIELDED
7110511 01-0771105-11 Green
Weight: 0.2 lb
7110512 01-0771105-12 Red
Dimensions: 1.25 x 4 in
18
Voltage: 28 VDC
Current: 1 Amp
7155402
EDMO# MFR# VOLTAGE TYPE
Weight: 0.14 lb PAR36
Dimensions: 1.4 x 1.59 x 2.07 in P36P1L 01-0771833-10B 14 VDC Landing | Spot light, 10°
Power consumption: 0.13 Amps @ 28 VDC | 0.26 Amps @ 14 VDC P36P1T 01-0771833-15B 14 VDC Taxi | Spreader optic, 40°
LED color: Aviation white P36P2L 01-0771833-20B 28 VDC Landing | spot light, 10°
P36P2T 01-0771833-25B 28 VDC Taxi | Spreader optic, 40°
PAR46
EDMO# MFR# MOUNTING SPECIFICATIONS P46P1L 01-0790750-10 14 VDC Landing | Spot light, 10°
7155402 01-0771554-02G Vertical mount | Flying leads P46P2L 01-0790750-20 28 VDC Landing | Spot light, 10°
7155403 01-0771554-03 Vertical mount | Pin and ring terminals ACCESSORIES
68-3791486 68-3971486A30 Clear Non-Optic replacement PAR-36 Lens
38-0240197 38-0240197-00 PAR36 gasket | Black
18
LIGHTING SOLUTIONS,
ternal combination. 90433 cannot ‘fit’ in place
of a 6” light bulb, technology considerations
require a stand-alone approach requiring a
degree of customization to the aircraft. NO MATTER THE AIRCRAFT.
EDMO HAS YOU COVERED
Weight: 1.7 lb
Dimensions: 5.75 x 2.61 in Give us a call at 1.800.235.3300 or visit
Current: 2 Amps edmo.com for parts and pricing.
LED color: Aviation white
ENGAGED
WHELEN ENGINEERING CO, INC
EDMO# 771888
MFR# 01-0771888-01
71888 series is an LED form, fit, and
function replacement to A775 & A775EXP
series with 12 in leads.
Weight: 0.25 lb
Dimensions: 3.16 x 1.65 x 1.47 in.
18
Current draw: 0.6 Amps @ 12 VDC
0.3 Amps @ 28 VDC
LED Color: Aviation white
Candela: 30,000
Weight: 0.58 oz
Dimensions: Single: 1.25 × 1.25 in Dual: 1.6 × 1.6 in
DIMMERS
Voltage/current: Single: 12–35 VDC @ 12.5 Amps
Dual: 12–35 VDC @ 15 Amps
9200-000-A
MAXDIM MINI LIGHTING CONTROLLERS
SEATON ENGINEERING CORP
Weight: 1 oz
Dimensions: 1.6 × 1.6 in
18
Voltage/current: 12-35 VDC, 20 amps total
0-10 amps per circuit
(both models)
Function modes: X - both circuits off 9100-001-F
S - starboard (right) on only 9100-001-E
P - port (left) on only
S+P - both circuits On
A44 - alternate 44 PPM (STD) The MaxDim Mini is a compact, lightweight, solid-state dimmer that is ideal for
B44 - both flash 44 PPM tight panel spaces. Provides control for LEDs, Nulite dimmers, UMA dimmers,
A88 - alternate 88 PPM and Avion Glare shield dimmers as well as hundreds of other DC lighting appli-
A120 - alternate 120 PPM cations. Complies with Cessna AD 93-24-15 regarding cockpit fires.
POST LIGHTS
Weight: 0.03 lb
Exposed height: 1 in w/out spacer
714XX SERIES LED INSTRUMENT POST LIGHTS 1.12 inches w/spacer
WHELEN ENGINEERING CO, INC Power consumption: 0.02 Amps @ 14 VDC
0.02 Amps @ 28 VDC
The 71434, 71440, and 71450 Series LED instrument post
light assemblies illuminate the instrument panel and function
as instrument mounting bolts, making them a high quality,
long-lasting alternative to conventional incandescent post EDMO# MFR# CONFIGURATION VOLTAGE
lights. LED lighting provides a longer operating life of
approximately 20,000 hours, reduced power consumption, 7084400 01-0770844-000 1 in. post/nut 14V
and improved shock and vibration resistance (LEDs do not 7084401 01-0770844-010 1.5 in. post/nut 14V
contain a filament), crisp, clear light color and temperature, 7084402 7084402 1 in. post/nut 28V
and no EMI/RFI interference. 7084403 01-0770844-030 1.5 in. post/nut 28V
• Approximately 20,000 hour LED life ACCESSORIES
• Shock and vibration resistant 70807000 70807000 LED light post hood
• Light color and temperature
• Produces no EMI or RFI interference
• Model 71434 is available in a 14V version with a white 71434B21
LED and a 28 V version with white or red (replaces exist-
ing A350 and A250CN assemblies) A350 SERIES POST LIGHTS
• Model 71450 includes a connector nut and is otherwise identical to 71434 WHELEN ENGINEERING CO, INC
• Model 71440 includes a #10-32 mounting thread and includes a 28 VDC These instrument post light assemblies illuminate the in-
version with white or red LED (replaces Model 70348) strument panel and function as instrument mounting bolts.
• Includes connector nut
Weight: 0.037 lb
Dimensions: 0.95 in (with spacer)
0.875 in (without spacer)
Power consumption: 0.10 mA @14 VDC & 28 VDC
18
EDMO# MFR# LENS COLOR POST VOLTAGE
HEIGHT
70844 SERIES LED INSTRUMENT POST LIGHTS A350BKIWSH 01-0770119-03 White Short 6V
WHELEN ENGINEERING CO, INC A350CNCL 01-0770119-05 Clear Short 6V
The model 70844 series are LED instrument post light as- A350CNCLBK 01-0770119-08 Clear Long 14V
semblies are designed to illuminate the instrument panel A350CNCL28 01-0770119-14 Clear Long 28V
and function as instrument mounting bolts—making them
A350CNIW28 01-0770119-12 White Long 28V
an excellent alternative to standard incandescent post
A350CNIWBK 01-0770119-06 White Long 14V
lights.
A350CNSH28 01-0770119-17 Clear Short 28V
• Long life of approximately 20,000 hours
A350CNIWB 01-0770119-15 White Short 28V
• Reduced power consumption compared to alternative A350CNRDB- 01-0770119-13 Red Long 28V
light sources
ACCESSORIES
• Shock and vibration resistant
A343 02-0350183-00 Connector nut assembly
• No EMI or RFI interference
A354IWBK 02-0350281-00 Post light cap assembly
7084400
Weight: 0.1 lb
Dimensions: 3 x 2.75 in
Mounting depth: 0.25 in
LAMPS, BULBS & BARS
EDMO# MFR# DESCRIPTION LAMPS
7081312 01-0770813-12 (E) LED dome light
WEDGE BASE LAMP
77081316 01-0770813-16 LED dome light
WHELEN ENGINEERING CO, INC
EDMO# A70828
MFR# A70828
Replacement bulb for Whelen A70828 flashing
anti-collision light lamp.
70820 SERIES LED MAP LIGHT
WHELEN ENGINEERING CO, INC
The 70820 Series map/reading light
assemblies are designed to illuminate the Voltage: 28 VDC
cockpit or cabin. These versatile lights Wattage: 50 W
are easy to adjust with a 360° swivel base Base: Wedge
for and LED bulbs for life (approximately
20,000 hours), reduced power consump-
tion, and a vibration- resistant design.
7082003
REFLECTOR LAMP
WHELEN ENGINEERING CO, INC
Weight: 0.19 lb
EDMO# W1524
MFR# W1524
Dimensions: 2.66 dia × 1.34 × 1.13 in
Replacement bulb for Whelen W1524 flashing
18
Voltage: 12 VDC
Wattage: 35 W
Base: Snap-in LB4014
Thickness: 0.220 in
SCREW-TYPE BASE LAMP Material: translucent plastic
Coating: three part NO-MAR epoxy
CANDELA CORPORATION
Lighting: 100% linear
(i.e. 7V on a 14V lamp will produce 50% lumens)
Current draw: 80 mA (average) 125 mA (max)
Meets FAR 25.853 burn requirements, PMA approved.
EDMO# MFR# VOLTAGE WATTAGE BULB
4553 4553-GEM 28 VDC 250 W PAR46 EDMO# MFR# VOLTAGE SIZE
4596 4596-GEM 28 VDC 250 W PAR36 LB4014 LB4014 14 VDC 4 in
LB4028 LB4028 28 VDC 4 in
BULBS
CANDELA CORPORATION
LIGHTING ACCESSORIES
MIDGET FLANGE C-BAYONET MINI BAYONET SUB-MINI
LIGHT TRAYS
MID-CONTINENT INSTRUMENTS & AVIONICS
EDMO# MFR# BULB/MOUNT VOLTAGE 2 in 28V incandescent light tray top-mount
MIDGET FLANGE replacement
327-SYL 327-SYL T-1 3/4 midget flange 28 VDC 6015358-2
ML-0328 0328 T-1 3/4 midget flange 6 VDC
ML-0330 330-I T-1 3/4 midget flange 14 VDC EDMO# MFR# VOLTAGE SIZE
334 334-1 T-1 3/4 midget flange 28VDC 6015358-2 6015358-2 28 VDC 2 in
ML-0387 ML-0387 T-1 3/4 midget flange 28 VDC 6015358-3 6015358-3 28 VDC 2 in
2029912338 202-991-23-38 T-1 SX3s midget flange 28 VDC 9015640-1 9015640-1 5 VDC For 4300-411's
18
C-BAYONET 9015640-12 9015640-12 28 VDC For NVG lighting
307 307-I S-8 single contact bayonet 28 VDC
ML-0303 303-I G-6 single contact bayonet 28 VDC
ML-1683 1683 S-8 single contact bayonet 28 VDC
MINI BAYONET
MD31 LED LIGHT TRAY
313 313-GEM T-1 3/4 mini bayonet 28 VDC
MID-CONTINENT INSTRUMENTS & AVIONICS
ML-1495 1495-1 T-4 1/2 mini bayonet 28 VDC
2 in 28V LED light tray top-mount
ML-1813 1813-1 T-3 1/4 mini bayonet 14.4 VDC
replacement
ML-1816 1816-I T-3 1/4 mini bayonet 13 VDC
ML-1819 1819-I T-3 1/4 mini bayonet 28 VDC MD31-4
ML-1820 1820-I T-3 1/4 mini bayonet 28 VDC
EDMO# MFR# VOLTAGE SIZE CONNECTOR
SUB-MINI
ML-6180 6180-I 60 milliamp bulb 5 VDC MD31 MD31 28 VDC 2 in no
22-I 22-I 40 milliamp bulb 14 VDC MD31-1 MD31-1 28 VDC 2 in yes
OL6839 OL-6839-I 24 milliamp bulb 28 VDC
Dimensions: 0.5 x 25 in
Light color: White
Weight: 2.1 lb
Dimensions: 2.37 × 5.0 × 5.50 in
Power consumption: 7.0 amps @ 14 VDC
3.5 amps @ 28 VDC
Approvals: FAA/PMA
18
REPLACEMENT CONNECTORS
WHELEN ENGINEERING CO, INC
Replacement cable connector kits and
assemblies.
Weight: 8 oz
EAR CUSHIONS
Cord length: 5.91 ft Compatible with the follwing Telex headsets:
Air 3500, ANR 150, and Stratus 30. Sold as a pair.
MICROPHONES
most hearing damage. SmartSense con-
59807-000 59807000 Electret Microphone | Model 38T
tinuously samples the cockpit, then learns
and adjusts the headset to the unique WINDSCREENS
noise signature of your aircraft. Ear cup 59688-000 59688000 Airman ANR500
speakers and an electret microphone help 59835-000 WS-2 AIR3000 & ANR4000
eliminate incidental noise and a new, high-efficiency boom microphone helps 800456-000 800456000 Elongated | AIR 3500, ANR, PRO Air Series,
conserve battery power. Echelon, Air 3100
800456-001 800456-001 Airman 750 & ANR 200
EDMO# MFR# DESCRIPTION
PRD10000 PRD000010000 Stratus 30XT
ACCESSORIES
63966-000 63966000 PT-300 Push-to-Talk-Switch Not finding what you need?
F01U183958 F01U183958 Replacement box for PT-300 EDMO has a wide variety of aviation headsets. Give us a call at
800456-017 800456017 Headband pad 1.800.235.3300 or visit edmo.com to see our full inventory.
DC PRO-X2 AVIATION HEADSETS • Outlast fabric head pad incorporates a vented design that absorbs excessive
DAVID CLARK COMPANY INC heat and keeps the pilot cool without 'hot spots'
The DC Pro-X2 series aviation headsets provide • Two 2xAA batteries powers the control module for up to 50 hours of use
improved noise reduction for both active ANR and • A collapsible, folding design
passive PNR versions. Enhanced Auto Shutoff • TSO-C139a Approved
virtually eliminates accidental battery drain
from the control module, while automatic gain
control (AGC) offers optimum ANR performance EDMO# MFR# DESCRIPTION
in high-noise conditions. Advanced comfort 43100G-06 43100G-06 DC One-XH headset
and performance is credited to the headset’s ACCESSORIES
ultra-lightweight and rugged alloy suspension,
41068G-03 41068G-03 Belt clip
plush leatherette ear seal with Outlast technol-
ogy, and heat absorbing head pad. David Clark’s 15976P-03 15976P-03 Ear seal
hybrid electronic noise cancelling technology 15977P-02 15977P-02 Head pad
offers excellent ANR performance with or without Bluetooth audio. Weighting in 18434G-02 18434G-02 Microphone wind screen M-1/DC
at only 8 ounce, the DC Pro-X2’s are the lightest, full-featured headsets in their
class for both general and commercial aviation pilots alike.
• Improved ANR and PNR noise reduction
• Enhanced auto-shutoff virtually eliminates battery drain
G3 ANR HEADSET / CARBON FIBER
EDMO# MFR# DESCRIPTION FARO AVIATION LLC
EDMO# FARO-G3
SINGLE EAR CUP MFR# FARO-G3 ANR
43106G-06 43106G-06 5-pin XLR | passive NR
The Faro G3® ANR headset is 100% constructed
DUAL EAR CUPS carbon fiber, making it extremely lightweight
43105G-01 43105G-01 Dual GA plugs | Bluetooth with the kind of barely-there comfort that results
43105G-02 43105G-02 6-pin connector | Bluetooth from a total weight of nine (9) ounces. It features
43105G-04 43105G-04 5-pin XLR | Bluetooth Bluetooth® connectivity, active noise reduction
43105G-07 43105G-07 5-pin XLR, ENC | No Bluetooth
rated at 52 dB, premium speakers for crystal
clear audio, and a 360° rotatable noise cancelling
43105G-10 43105G-10 Dual GA plugs, ENC | No Bluetooth
electret microphone. Faux leather ear cushions
43106G-01 43106G-01 Dual GA plugs | passive NR and a soft head cushion ensure that this light-
43106G-02 43106G-02 5-pin XLR | passive NR weight headset’s nine ounces go unnoticed for
hours of in-flight comfort.
• Bluetooth™ compatible
• Active noise reduction rated at 52 dB
DC ONE-XH HEADSET • 2xAA batteries required
DAVID CLARK COMPANY INC • Weight: 9 oz
The DC One-XH headset offers helicopter
pilots the perfect combination of comfort, G2 ANR HEADSET
technology, and durability. With built-in FARO AVIATION LLC
Bluetooth, cellphones, MP3 players, tablets,
or other personal devices can seamlessly The Faro® G2 headset with active noise reduction
integrate into the headset. An over-the-ear (ANR) reduces cockpit noise up to 52 dB. The
design features plush leatherette ear seals Faro® G2 uses a combination of passive noise re-
(with memory foam) delivering excellent noise duction (PNR) and active noise reduction technol-
attenuation and comfort, while the head pad is ogy (ANR) to reduce ambient noise in the aircraft.
constructed of soft, outlast fabric absorbing Active noise reduction is achieved by placing
heat buildup and keeping users cool during a microphone inside the ear cup that listens to
long flights. A fully adjustable suspension ambient noise and generates “anti-noise” into the
assembly is integrated into the headband for
a personal fit. Swivel hinge stirrups disperse
speakers to cancel out unwanted ambient noise.
• Noise canceling electret microphone and fully
19
clamping pressure, allowing the headset to conform to the user’s head. Hybrid adjustable beam with windscreen allows com-
ENC technology provides active noise reduction (ANR) with feed-forward/feed- munication to be heard loud and clear
back technology, and an external microphone on the dome picks up outside • Premium leather ear protection provides 23 dB
noise for superior noise attenuation. in passive noise reduction and additional 29 dB
• 5-foot extended coil cord and a single U-174/U plug for helicopter noise reduction with active noise reduction
• Hybrid Electronic Noise Cancellation with advanced feed-forward and feed- • MP3/Audio compatible with built in 3.5 mm
back technology provides best-in-class active noise reduction audio jack and included auxiliary cable
• Digital signal processing (DSP) provides high fidelity audio for excellent • Weight: 23 oz
communications and music listening
• Bluetooth wireless technology provides seamless integration for connecting EDMO# MFR# DESCRIPTION
to cell phones, MP3 players, tablets or other personal devices
G2-A-BLACK X000T93H85 G2 ANR
• Stereo/mono selection is compatible with all aircraft audio panel configura-
G2-AHBLACK X000TO2IDP G2 ANR | Helicopter
tions
• M-55 electret microphone with enhanced noise cancelling
G2 ANR PROTECTED HEADSET VERSIONS • Manual turn-off using the toggle switch on the battery box
FARO AVIATION LLC • Cell/satellite phone capable with a “true stereo” input jack that provides
EDMO# G2-AHELMET compatibility with tablets and cell phones with 3.5 mm (4 conductor) inputs
MFR# FARO-G2ANR-HELMET or a 2.5 mm input
The Faro® G2 Protected Headset adds • A full Flex microphone boom allows the user to adjust the mic position
the G2 headset to a protective helmet. according to their preferences
This headset uses active noise reduction • Volume controls on each ear cup allow the wearer to individually adjust
(ANR) and includes a noise canceling
electret mic, MP3 capability, and soft • Weight: 16.9 oz
silicone gel ear protection.
• Large, comfortable head pad. PA-1771T ACTIVE HEADSET
• Noise canceling electret microphone PILOT USA
• MP3/Radio/iPod/iPad compatible EDMO# PA-1771T
The PA-1771T ANR headset is both
lightweight and comfortable due to
FARO HEADSET ACCESSORIES its genuine sheepskin head pad and
proprietary silicone gel ear seal which
have 30% less weight over regular gel ear
seals. The auto on/off circuitry allows
the PA-1771T to switch on ANR when
plugged into the aircraft and switch off
when unplugged. Also, this headset will
automatically shut off when the radio or
avionics master switch is turned off. The
EAR-SEAL EARCUSHION BAG-BLACK MIC-COVER
PA-1771T provides a true stereo input jack
for compatibility with music devices such
EDMO# MFR# DESCRIPTION as cellphones, satellite phones, CD or
EAR-SEAL GEL-EAR-SEAL Silicone gel ear seals MP3 players, and iPods. The cellphone system is designed to work with modern
EARCUSHION LEATHER-EAR-CUSHION Faux leather ear cushion smartphones that have a 3.5 mm (4-conductor) jack or older cellphones with a
2.5 mm jack.
BAG-BLACK FAROBAG-BLACK Headset bag | black
MIC-COVER FARO-MIC-COVER Microphone cover • Features with a sheep skin fleece head pad and proprietary silicone gel ear
seals
• Powered by external battery pack using a standard 9-volt battery
• Auto On/Auto Shut-off circuitry
• True stereo input jack allows users to listen to music from a CD or MP3
PA-1761T ANR HEADSET players, as well as iPods
PILOT USA
EDMO# PA-1761T
MFR# PA-1761T
Weight: 13.4 oz
The PA-1761T Active headset uses a Pilot Passive NR: 25 dB
Direct Noise Canceling System to provide
Active NR: Additional 20–22 dB @ 100 Hz
active noise reduction. This system directs
noise canceling toward the lower frequencies, Microphone Amplified noise canceling electret
which makes the PA-1761T unique among Boom: DNC/XL style
ANR headsets. Included within the ANR Speaker impedance: 300Ω
technology is an Enhanced Voice Intelligibility Cord: 5 ft, straight
circuit that enhances speech frequencies by Plug: 1/4 inch audio & 0.206 inch plug
2-4 dB on all incoming radio and intercom Color: Blue
audio. The combined result of active noise
reduction coupled with speech enhancing
19
or avionics master switch is turned off. The PA-1771T provides a true stereo EDMO# MFR# DESCRIPTION
input jack for compatibility with music devices such as cellphones, satellite
phones, CD or MP3 players, and iPods. The cellphone system is designed to PA-10L PA-10L Foam windscreen | dynamic microphone
work with modern smartphones that have a 3.5 mm (4-conductor) jack or older MICROPHONE BOOMS
cellphones with a 2.5 mm jack. 1142-20AF 1142-20AF 180 mm flex mic boom for electret microphone
• Features with a sheep skin fleece head pad and proprietary silicone gel ear
seals
• Equipped with auto/on shut-off proprietary circuitry
• ANR automatically switches off when unplugged from the aircraft
• Automatic shut-off when the avionics are shut-down
• True stereo input jack for music enjoyment from a CD player, iPod, or MP
Weight: 16.9 oz
Passive NR: 25 dB
Active NR: Additional 20–22 dB @ 100 Hz
Microphone: Amplified noise canceling electret
Boom: DNC/XL
Speaker impedance: 300Ω
Color: Black
19
MICROPHONE/WINDSCREENS/BOOMS
PASSIVE HEADSETS • Miniature, amplified, noise-canceling electret microphone that provides 400
Hz hum rejection
TELEX COMMUNICATIONS INC • Mountings for the boom and earcups are also used as cord entrances to
One of the most popular headsets in the world, minimize the number of openings built into the earcups
the Airman 750 Passive Headset provides light- • Durably constructed with cadmium-bronze wire and tapered strain reliefs
weight comfort and adaptability, weighing in at with polypropylene insulation over wires and a urethane jacket for; all wires
just over 3 ounces. The fit can be customized to are RFI and EMI shielded
the wearer—the earphone housings are mounted
on stainless steel sliders that allow over two
EDMO# MFR# DESCRIPTION
inches of adjustment and the microphone boom
is both flexible and reversible, so it can be 300400-000 300400-000 AIR 3500
worn on either side of the head. There are two 300400-001 300400-001 AIR 3500 | Helicopter
versions of the Airman headset available: Airman ACCESSORIES
750, which includes an amplified, noise-cancel- 800456-009 800456009 Gel earseal | one pair
ing electret mic and the Airman 760, consisting
of headphones only.
• Open-air style earphones provide comfort
during long flights and are designed for adaptable usage
• Flexible microphone boom can be worn on either side of the head
Weight: 4.27 lb
Certification: FAA TSO-C57a & TSO-C58a EDMO# MFR# DESCRIPTION
800456-008 800456-008 Foam ear cushions | Stratus 30, Air 3500, ANR 150
800456-021 800456021 Foam ear cushions | Stratus 50D and 30XT
EDMO# MFR# DESCRIPTION 590619-003 590619003 Leatherette ear cushions
700498-000 700498000 Foam top cover | Air 3000
64000-100 64000-100 5X5 PRO III standard model
64000-103 64000-103 5X5 PRO III for KC-10 aircraft
64000-111 64000-111 5X5 PRO III XLR-5
added comfort
• Noise-cancelling, M-7A microphone
HBT-60 FEATURES:
• 1200 ohm earphones, wired in paral-
Bluetooth 4.0, NO MIC (listen only), dual ear, lel for enhanced reliability
behind-the-head
• 5-foot extended coil cord, single plug
(U-174/U)
HBT-60
MODEL H10-60 SERIES PASSIVE HEADSET MODEL H10-20 SERIES PASSIVE HEADSET
DAVID CLARK COMPANY INC DAVID CLARK COMPANY INC
The H10-60 Series headsets provide a noise The Model H10-20 headset provides 24 dB
reduction rating of 23 dB and are designed of passive noise reduction coupled with
to go the distance with a plush, comfortable a comfortable fit created by a super-soft
fit for long-distance flights. Headsets in this head pad and large, lightweight Comfort
series are constructed with an adjustable Gel ear seals. A Flex boom assembly allows
headband, cushioned head pad, and gel the wearer to adjust the M-7A noise-cancel-
ear seals that provide even pressure on ing microphone to their preferences.
the wearer’s head. The headset’s M-7A • Certified noise reduction rating of 24 dB
microphone is attached to a patented flex/
wire boom that can be precisely positioned • Includes a Flex boom assembly that
by the user. Available in three different cord can be adjusted for perfect microphone
and plug configurations. placement and an M-7A, advanced
noise-canceling microphone
• Noise reduction rating of 23 dB
• Includes a low-profile volume control
• Equipped with an M-7A microphone knob with detent settings
• Constructed with a flex wire boom for precise microphone placement and a • Steel chrome, lock nut headband
boom guide lock
• Adjustable headset pressure and headband size, steel chrome, lock nut
Weight: 19 oz
Approvals: FAA TSO-C57 Cat. B & TSO-C58a
Weight: 22 oz (headset only) RTCA/DO-214 standards
Certification: FAA TSO-C139
RTCA/DO-214 standards
EAR SEALS
19
NAMES THAT YOU TRUST. 14096P-09 14096P-09 H10-13.4, H10-13N, H10-13S, H10-13H, H10-13Y,
H10-20, H10-21, H10-26, H10-30, H10-36, H10-56,
H10-56N, H10-60, H10-60C, H10-60H, and H10-00
Give us a call at 1.800.235.3300 or visit edmo.com 18316G-02 18316G-02 Foam ear seals | H3530, H3531, H3335, H3312,
H3313
for parts and pricing. 22658G-01 22658G-01 Ear seal comfort covers
40243G-02 40243G-02 Flo-Fit gel ear seal
40863G-02 40863G-02 Comfort gel ear seal with undercut design
PA-1151ACB PA-1151ACG
Designed for the specific needs of young aviators, the PA-1151ACB Children’s MICROPHONE/WINDSCREENS/BOOMS
Headset is a passive headset that is designed for smaller heads but includes
all of the trimmings that come with an adult headset. To accommodate smaller
head circumferences, this headset is designed with a smaller headband with 19
a smaller version of Pilot USA’s SuperCushion head pad and a full, flexible
microphone boom that is shorter than an adult-sized headset boom. This
headset is also compatible with media players, so that little pilots-to-be can
stay entertained in-flight with their tablet, laptop, or cellphone. Provides passive
noise reduction of 24 dB.
PA-10L PA-10 PA-5X
DEVOTED
• Typical range approx. 30 feet (10 meters)
• Operating time approx. 10 hours (standby 50 hours)
• USB charging cable and wall charger included
Weigth: 0.77 lb
Dimensions: 8.66 x 5.12 x 3.54 in
Bluetooth version: 3.0 (class 2)
Bluetooth profiles: HSP, HFP, A2DP, AVRCP
Sensitivity: -90 dB
Range: 30 ft (10 m), typical
Built-in battery: 3.7 V, 330 mAH lithium-ion
Operatinging time: 10 hr (max)
Standby current draw: 6 mA
Standby time: 50 hr (max)
Temperature range: Operating: -15°C to 50°C
HEADSETS
XX series extension cords microphone
muff to mouth
EAR SEALS (ONE PAIR)
18316G-02 18316G-02 Foam ear seals | H3530, H3531, H3335, H3312, H3313
MODEL H331X HEADSETS EXTENSION CORDS
DAVID CLARK COMPANY INC C31-50 22397G-05 50 ft straight cord
C31-100 22397G-06 100 ft straight cord
Model H331X headsets are muff
microphone style headsets that are ideal MICROPHONES
for maintenance and ramp operations. 12765G-04 12765G-04 Boom assembly for MIC | H10-30, H10-36, H3335
This series of noise-canceling headsets 12948G-14 12948G-14 Microphone for M-1/DC | H10-30, H10-36, H3335
provide a certified noise reduction rating
of 26 dB.
• All headsets in this series are equipped
with an M-1/ DC noise-canceling
amplified dynamic mic with varying
configurations (see table below)
• Supplies a comfortable fit with a soft
foam head pad and foam ear seals
H3310 HEADPHONES
• Designed with a corrosion-proof,
chrome plated headband and stirrup assembly AIRMAN 760 HEADPHONES
• Available with 30-inch or 25-foot cords TELEX COMMUNICATIONS INC
EDMO# 64400-200
EDMO# MFR# CORD MICROPHONE MFR# 64400-200
H3310 12506G-05 30-inch straight cord with Snap-fastened One of the most popular headsets in the world,
PJ-051 plug; mates C31-XX nylon straps secure the Airman 7XX family of headsets provide light-
series extension cords microphone muff to weight comfort and adaptability and weigh in at
mouth just over 3 ounces. The fit can be customized to
H3312 12515G-12 25-foot straight cord Microphone muff hangs the wearer—the earphone housings are mounted
eliminates the need for freely, ready for periodic
extension cords use on stainless steel sliders that allow over two
inches of adjustment. There are two versions of
EAR SEALS (ONE PAIR) the Airman headset available: Airman 760, con-
18316G-02 18316G-02 Foam ear seals | H3530, H3531, H3335, H3312, H3313 sisting of headphones only and the Airman 750
EXTENSION CORDS which includes an amplified, noise-canceling
C31-50 22397G-05 50 ft straight cord electret mic (see page 228 for the Airman 750).
C31-100 22397G-06 100 ft straight cord • Open-air style earphones
MICROPHONES • Earphone housings are mounted on stainless
18315G-06 18315G-06 Microphone cord assembly | H3310, H3320 steel sliders that provide over two inches of fit adjtment
• Comes with removable ear cushions designed for quick field replacement
• Weighs 3.2 oz
• FAA TSO-C57a approved
MODEL H3335 HEADSET
DAVID CLARK COMPANY INC MODEL 10A HEARING PROTECTOR
The Model H3335 headset is a noise-cancel- DAVID CLARK COMPANY INC
ing headset with a certified noise reduction EDMO# 12451G-01
rating of 24 dB. This headset is ideal for use MFR# 12451G-01
in ramp communications and other ground One of David Clark’s most popular hearing 19
support applications. protection models, the Model 10A over-the-head-
• Provides certified noise reduction at style hearing protection headphones provide a
24 dB certified noise-reduction rating of 23 dB.
• Incorporates an M-1/DC noise-canceling • Equipped with wide, foam-filled ear seals and
amplified dynamic microphone low-profile ear cups
• Microphone can be moved to either the • An adjustable head band with a plush foam
right or left side using the hinged wire head pad provides a comfortable fit
boom
• Provides hands-free communication with
a microphone on/off switch on the ear
dome
• Designed with a corrosion-proof, chrome plated headband and stirrup
assembly
• 26 ft coil cord mates with C31-12, C31-25, C31-50, and C31-100 straight
extension cords
JB-03 10FT JB-03 10ft headset extension cable PJ-068 and PJ-055B
JB-03 25FT JB-03-25 25ft headset extension cable PJ-068 and PJ-055B
Y ADAPTERS
HELICOPTER ADAPTERS
JB-08 EJB-08 5ft helicopter headset adapter U-174/U or U-93A/U to general aviation headset
19
JB-15 EJB-15 1ft double helicopter Y adapter single helicopter radio or intercom jack into two
MULTI-CONDUCTOR CABLE
SPECIALTY ADAPTERS
19
JB-26-11 JB-26L 11ft IPOD/MP3 to intercom adapter
AIRBUS ADAPTERS
EDMO# MFR#
FIXED WING
P-72B PA-72B Dual Lemo 6-pin headset adapter allows two panel powered headsets to be used in one panel power headset
jack
PA-72S PA-72S 6ft dual headset adapter for monaural or stereo headsets
PA-73 PA-73S Dual headphone adapter single radio or intercom headphone jack into two
PA-77S PA-77S Headset extension cable for monaural or stereo headsets. Available in 5 ft (PA-77S), 10 ft (PA-77S-10), and 25
ft (PA-77S-25) lengths.
PA-78 PA-78 5ft replacement monaural headset cable with PJ-055 and PJ-068 plugs
EDMO# MFR#
PA-80S PA-80S General aviation music player adapter
PA-80S-H PA-80S/HERO3 General aviation W Hero3 recorder adapter mini USB to GA dual plug
PA-80S-I PA-80S/iPHONE General aviation iPhone/smartphone digital audio recorder adapter 3.5mm to GA dual plug
PA-80S/D PA-80S/DIGITAL General aviation digital audio recorder adapter 3.5mm to GA dual plug
PA-82 PA-82 Headset adapter for ICOM A3, A6, A22, and A24. PJ-055 and PJ-068 to ICOM plug
PA-82/A25 PA-82/A25 Headset adapter accepts standard PJ-055 & PJ-068 plugs to ICOM A25 right angle plug
PA-82K PA-82K Headset Adapter accepts standard PJ-055 & PJ-068 plugs to Bendix King KX-99 straight plug
PA-85 PA-85 Headset adapter for ICOM A23 and A5. PJ-055 and PJ-068 to ICOM A23 straight 3.5mm plug
19
PA-86A PA-86A Amplified cell phone/music player adapter
EDMO# MFR#
PA-86BLU/H PA-86BLU/H BluLink interface adapter for helicopter plug
PA-89F/A20 PA-89F/A20 Bose A20 to Fischer adapter. 6 pin Lemo to 8 pin Fischer
PA-91 PA-91 General aviation to .25in single plug adapter .206in mic & .25in phone to .25in single plug
PA-92 PA-92 .25in single plug to general aviation adapter single .25in to .206in mic & .25in phone plug
19
PA-96 PA-96 GA headset to PC/Flight simulator adapter, GA dual jacks to dual 3.5 mm plugs for computers
EDMO# MFR#
PA-97 PA-97 General aviation to Airbus adapter
PA-176 PA-176 David Clark H10-76 conversion kit. Single U-74/U plug to a dual plug PJ-055 and PJ-068
HELICOPTER
PA-72H PA-72H Dual headset Y adapter. single helicopter plug to two helicopter plugs
PA-75 PA-75 Helicopter to general aviation headset adapter. U-174/u or U-93A plugs with U92A/U socket to M642/4-
1(PJ-055) and M642/5-1(PJ-068)
PA-76 PA-76 General aviation to helicopter headset adapter M642/4-1 (PJ-055) and M642/5 (PJ-068) plugs to U-174/U
PA-77H PA-77H Helicopter extension cable U92A jack and U174/U plug. Available in 5 ft (PS-77H/5), 25 ft (PS-77H/25), 50 ft
(PS-77H/50), and 100 ft (PS-77H/100) lengths.
19
PA-80H-H PA-80H/HERO3 Helicopter GoPro Hero3 recorder adapter mini USB to helicopter U-174/U plug
PA-80H-I PA-80H/iPhone Helicopter iPhone/smartphone digital audio recorder adapter 3.5mm to helicopter dual plug
EDMO# MFR#
PA-82H PA-82H Helicopter headset adapter for ICOM A3, A6, A22, and A24. PJ-055 and PJ-068 to ICOM plug
PA-87H PA-87H High to low impedance converter, helicopter high to military low
PA-88H PA-88H Low to high impedance converter, military low to helicopter high
PA-94 PA-94 3ft helicopter extension cable with Push-To-Talk U-93A plug to U-94A with Push-To-Talk
19
HELICOPTER
HELI-AD FAROHELIAD Helicopter adapter
22378G-11 22378G-11 Headset stirrup and clamp kit for use with H3492
A99-14CRG 41034G-02 Charging unit for use with 9900 series wireless battery powered modules
19
C3019B 18667G-48 Headset to Radio Adapter for use with series 3000 headsets
C6224 40918G-28 Radio adapter for use with Kenwood TK-X140/NX320 model radio
AVIATION
HEADSETS
19
MICROPHONE LIGHTS
interfacing through U3810, U3814, U3815,
U3815A, or U3816 Radio Interface Modules.
It is an industrial grade, momentary PTT
footswitch which includes a 15' straight cord
length and mating MS-type connector for
interface with the appropriate Series 3800 MIKE LIGHTS
Radio Interface Module. SEITZ SCIENTIFIC INDUSTRIES
• Hands-free, radio PTT capability Well known for their application by the
US military, Mike Lites (also known as
• Compatible with U3810, U3814, U3815,
lip lites) are a necessity for night use in
U3815A or U3816 Radio Interface Modules
an aviation environment. Mike Lites are
• 15' straight cord for remote radio transmit compatible with all night vision goggles
capability, w/ mating 2-pin MS-type con- and devices and can be mounted on
nector for module interface helmets or headsets, on an M-87, M-162
• Cast iron footswitch housing provides many years of reliability or similar microphones. A pushbutton ML-21
ON/OFF switch on the side of the light
• Positive action, momentary SPDT switch
can be actuated by the wearer’s lip or
• Non-slip foot pad helps ensure ease of actuation tongue; a slight push provides momentary
light while an extended push places the
switch in the “ON” position until a second
DAVID CLARK PUSH-TO-TALK SWITCH extended push is used to turn the light
DAVID CLARK COMPANY INC off. ML-22
EDMO# C10-15
MFR# 18216G-01 • Uses two AA batteries (not included). 19
• Portable push-to-talk (PTT)
switch with double-pole switch
contacts provide positive keying EDMO# MFR# DESCRIPTION
with no dead spots.
ML-8 ML8 Mike Lite | NVIS, 3-green
• Constructed with durable,
high-impact ABS plastic housing ML-21 ML21 Mike Lite | NVIS, 3-green (bright)
• Highest grade Velcro hook and ML-22 ML22 Mike Lite | NVIS, 1-white and 2-green
pike yoke strap for tight, secured ML-24 ML-24 Mike Lite | NVIS 3-green A on Maxillo face shield
mounting and 3-green A on Mic
• Coil cord (5 ft extended) shielded for positive protection from radio frequen-
cy and Electro-Magnetic interference
and zero connectivity disconnects. noise rejection. The compact single stage
transistor amplifier is specially stabilized
• Fully wireless Bluetooth speaker microphone
and will operate uniformly from +550 C 602-3375
• Superb audio quality down -200 C.
• IP56 dust and water resistant • EMI and RFI Protected
• Noise cancelling microphone • FAA TSO approved
• 10 meter operating range
• Over 40 hours talk time and 30 days standby EDMO# MFR# CONNECTOR MOUNTING
• Simple to operate 602-3373 602-3373 XLR-4-12C Blade hanger bracket
• Easy to use power, push to talk button, and up/down buttons 602-3374 602-3374 PJ-068 Slide hanger
602-3375 602-3375 PJ-068 Button hanger bracket
• Built-in 3.5 mm earphone jack
602-3376 602-3376 PJ-068 Hook loop hanger bracket
• Includes USB charging cable and wall charger
ACCESSORIES
85715 85715 Amplifier
86099 86099 Microphone cartridge
DYNAMIC
hardware
CIX2
**Special coil cable for EMS applications, 20-inch straight section from end of cable to switch case.
19
CIXAT 2
CIX3
CASE & CLIP JACK VOLUME CONTROL CABLE & LENGTH PLUG
CODE COLOR CLIP CODE DESCRIPTION CODE IMP GRND CODE DESCRIPTION CODE DESCRIPTION
1 large none TJT-120 (civil helo) none none n/a K2 2 ft coil U-174/U
black 74K
2 none TJ TJT-101 (civil helo) H hi yes KM 3 ft ** (wired for key)
3 small W TJT-120 (military) HA hi no K3 3 ft coil MS3116E10-6P
6P (6 contact plug)
4 beige large TJW TJ-101 (military) L lo yes K6 6 ft coil
MS3476W10-6P
5 none B TJT-125 (5 contacts) LA lo no K10 10 ft coil 6W (6 contact plug)
6 small N NATO (Europe) K15 15 ft coil MS3476W10-6P
6WE
7 blue large CIJ-051 (commercial K20 20 ft coil & EMI backshell
C
8 none aviation) /XX XX ft straight MS3476W12-10P
10W***
F U-61/U (USFS) (10 contact plug)
9 small
CIJ-055 & CIJ-068 MS3476W12-10P
A gray large G 10WE
(general aviation) & EMI backshell
B none U-77/U
77
R red large (MIL-C-10544)
olive CIPC-055
D large YK & CIPC-068
drab
(general aviation)
5L lugs
5X no plug
SWITCH CONFIGURATION
CODE DESCRIPTION MIC INTERRUPT CODE DESCRIPTION MIC INTERRUPT
0 ICS mom-mom none 4 ICS mom-lock (vox) mic hi
1 ICS mom-mom mic hi 5 ICS mom-lock (CI vox***) mic hi
2 ICS mom-lock none 6 ICS PTT (3 contact) none
3 ICS mom-lock mic hi 7 ICS PTT (3 contact) mic lo
0R XMIT mom-mom none 8 ICS PTT (DPDT) mic hi
1R XMIT mom-mom mic hi 6R XMIT PTT (3 contact) none
2R XMIT mom-lock none 8R XMIT PTT (DPDT) mic hi
3R XMIT mom-lock mic hi
**Special coil cable for EMS applications 20-inch straight from coil to switch case.
19
***More MS3476W12-10P wiring options available.
CIXAT 3
CIX4
CASE & CLIP JACK VOLUME CONTROL CABLE & LENGTH PLUG
CODE COLOR CLIP CODE DESCRIPTION CODE IMP GRND CODE DESCRIPTION CODE DESCRIPTION
1 large none TJT-120 (civil helo) none none n/a K2 2 ft coil U-174/U
black 74K
2 none TJ TJT-101 (civil helo) H hi yes KM 3 ft ** (wired for key)
3 small W TJT-120 (military) HA hi no K3 3 ft coil MS3116E10-6P
6P (6 contact plug)
4 beige large TJW TJ-101 (military) L lo yes K6 6 ft coil
MS3476W10-6P
5 none B TJT-125 (5 contacts) LA lo no K10 10 ft coil 6W (6 contact plug)
6 small N NATO (Europe) K15 15 ft coil MS3476W10-6P
6WE
7 blue large CIJ-051 (commercial K20 20 ft coil & EMI backshell
C
8 none aviation) /XX XX ft straight 10W MS3476W12-10P
F U-61/U (USFS) **** (10 contact plug)
9 small
CIJ-055 & CIJ-068 10WE MS3476W12-10P
A gray large G **** & EMI backshell
(general aviation)
B none U-77/U
77
R red large (MIL-C-10544)
olive CIPC-055
D large SWITCH CONFIGURATION YK & CIPC-068
drab
(general aviation)
CODE SLIDE SWITCH XMIT PTT MIC INTERRUPT
5L lugs
0 ICS (mom)-Xmit (mom) none none
5X no plug
1 ICS (mom)-Xmit (mom) none mic hi
2 ICS (lock)-Xmit (mom) none none
3V ICS vox (lock)-Xmit (mom) none mic hi
4 ICS (mom-lock) 3 contact none
5 ICS (mom-lock) 3 contact mic lo
6 ICS (mom-lock) DPDT mic hi
4M ICS (mom-mom) 3 contact none
5M ICS (mom-mom 3 contact mic lo
6M ICS (mom-mom) DPDT mic hi
5V ICS (mom)-CIS vox (lock) 3 contact mic lo
6V ICS (mom)-CIS vox (lock) DPDT mic hi
7*** ICS (mom)-CIVox (lock) 3 contact none
8*** ICS (mom)-CIVox (lock) 3 contact mic lo
9*** ICS (mom)-CIVox (lock) DPTDT mic hi
19
**Special coil cable for EMS applications 20-inch straight from coil to switch case.
***This option is only available with switch configurations 3, 5, and 6. ICS is Vox only.
****More MS3476W12-10P wiring options available.
MS3116A10-6P PLUG: -6P MS3116A10-6P PLUG: -6P/1 MS3116A10-6P PLUG: -6P/2 MS3116A10-6P PLUG: -6PA
MS3476W10-6P PLUG: -6W MS3476W10-6P PLUG: -6W/1 MS3476W10-6P PLUG: MS3476W10-6P PLUG: -6WA
6P STANDARD 6P OPTION 1 6P OPTION 2 6P OPTION A
Mic Hi red to B Mic Hi red to A Mic Hi green to E Mic Hi red to B
Mic Lo green, brown & Mic Lo green, brown & Mic Lo red & mic shield to B Mic Lo green to C
all shields to C all shields to C
ICS key yellow to F ICS Key yellow to F ICS Key yellow to C ICS key yellow to F
Xmit key blue to E Xmit Key blue to E Key Return brown & overall shield to F Xmit key blue to E
Phones Hi white to D Phones Hi white to D Phones Hi white to D Phones Hi white to D
Phones Lo black to A Phones Lo black to C Phones Lo black, blue & phone shield Phones Lo black, brown & all shields
to A to A
MS3116A12-10P PLUG: -10P MS3116A12-10P PLUG: -10P/1 MS3116A12-10P PLUG: -10P/2 MS3116A12-10P PLUG: -10P/5
MS3476W12-10P PLUG: -10W MS3476W12-1-P PLUG: -10W/1 MS3476W12-10P PLUG: -10W/2 MS3476W12-10P PLUG: -10W/5
MS3476L12-10P PLUG: -10W/L MS3476L12-10P PLUG: -10P/1L MS3476L12-10P PLUG: -10W/2L MS3476L12-10P PLUG: -10W/5L
10P STANDARD 10P ALTERNATIVE 1 10P ALTERNATIVE 2 10 P ALTERNATIVE 5
Mic Hi red to F Mic Hi red to A Mic Hi red to E Mic Hi red to B
Mic Lo green & mic shield to G Mic Lo green & mic shield Mic Lo green to F Mic Lo green & mic
to B shield to A
Phones Hi white to A Phones Hi white to C Key ground brown to A Phones Hi white to C
Phones Lo black to B Phones Lo black to D Mic Shield drain to J Phones Lo black to D
ICS key yellow to D ICS key yellow to E Phones Hi white to G ICS Key yellow to E
Xmit key blue to E Xmit key blue to F Phones Lo black to H Xmit Key blue to G
Ground brown & overall & phone Ground overall & phone shields ICS Key yellow to C Ground brown, overall &
shield to J to G phone shields to J
Xmit Key blue to D
Ground brown, overall and phone
shields to backshell
If the wiring configuration you need is not shown here, please give us a call at 1.800.235.3300 to specify how you would like to see your switch and cable assembly wired.
DROPCORDS
SKYE AVIONICS DROPCORDS
SKYE AVIONICS
Skye Avionics’ drop cords are constructed to withstand rough use and conditions while providing the user with a versatile,
ergonomic design that can be operated with either hand. All drop cords include long-life PTT switches that are rated to with-
stand 1,000,000 mechanical and electrical cycles and a volume control that is sealed in a container and panel sealed to IP67
specifications.
19
• Ergonomic design is CNC machined out of aluminum that is hard anodized to resist scratching
• Heavy duty belt clip
• Provides volume control and radio PTT
• Coil cord available in varying lengths (see product table) with ICS switch (Lock-Mom)NICS
SAL-200-12
both the pilot and copilot. The InterMUSIC series privacy function). Transparent ICS allows immediate transmission from the ICS
can be installed in several different configura- mode without any additional switching.
tions from single-unit systems to fully indepen- • InterVOX system uses AEM’s audio processing system of dynamic noise
dent stations for the pilot, copilot and passen- reduction and selective bandwidth to produce clean, crisp intercom audio
gers. These systems can be further expanded under noisy conditions
using the tie line connections (compatible with
AA80, AA82, AMS4x, and AA9x series units). • High output power and low distortion ensures adequate level for all types of
headsets and flying conditions
• Music is muted during ICS, ATC and transmit operations; individual mic
gating on ICS with adjustable muting depth • Provides split bus operation and automatic emergency switching in the event
of power failure
• Equipped with two color LED annunciators including radio transmit green
and ICS triggered amber
EDMO# MFR# MIC INPUTS/DESCRIPTION
• Controls include ICS volume, music level, VOX squelch, RX volume, RX bal-
ance, ICS balance, music balance, ICS bass, music bass and dual pilot and AA80-001 AA80-001 4 place intercom | VOX
copilot/passengers VOX controls AA80-020 AA80-020 4 place intercom | VOX & PTT
• Voice track trigger circuit with adjustable threshold on front panel; LIVE or ACCESSORIES
HOT mic is operated by rotating the VOX control to extreme counter-clock- AA80-IKC AA80-IKC Installation crimp kit
wise position
SAP-1 SAP-2ADAPT
Speaker adapter plates allow easy speaker installation or replacement of
speakers into precut holes.
MFR# PSUPTC0707
The Universal Pitot Tube Cover easily and
securely attaches to a variety of GA pitot
Weight: 3 lb
Weight: 3.2 oz each Dimensions: Collapsible length: 28 in
Dimensions: 2.58 x 8 x 2.37 in
AG-TC1.
Weight: 3.5 lb
Dimensions: Collapsible length: 23 in
Weight: Small: 4.3 oz each
Dimensions: Small: 1.5 x 1.5 x 6 in // .125 in thick
Material: Aluminum
LARGE
AG-TC9 FAP C10-R Red 8 | 6.6 or larger
Weight: 3.8 lb
AG-TC10 FAP C10Y Yellow 8 | 6.6 or larger Dimensions: Collapsible length: 28 in
Scott’s Sales windsocks are extremely durable with double stitched, polyester
WIND SOCKS & FRAMES thread seams and solid brass eyelets. Made of polyester fabric that is tough
and lightweight, these windsocks also feature a plastic coating to resist all
weather conditions. These windsocks are available in bright orange, vivid white,
or orange with a white stripe, and also in many different sizes. They are also
AVIATION WINDSOCK available for use with a lighted frame.
METAL ENGINEERING COMPANY
Constructed of a special polyester fabric EDMO# MFR# SIZE COLOR
that’s tough, but lightweight, and plastic WS1030 1030 10 x 36 in Orange
coated to resist weather. This windsock is
extremely durable with all seams double WS1030W WS1030W 10 x 36 in White
stitched with polyester thread and solid WS13550O 13550 13 x 55 in Orange
brass eyelets in the double reinforced
throat. Nylon ties included. WS13550S 1355S 13 x 55 in Orange & white stripes
WS13550W 1355W 13 x 55 in White
WS1850O 1850 18 x 60 in Orange
WS1850W 1850w 18 x 60 in White
WS1880O 1880 18 x 96 in Orange
1896-ELLSO
WS1880O/L 1880 18 x 96 in Orange (use with Frame-18L)
36144ELSOW 36X144-ELLS/ 36 X 144 in. Orange/white stripe WS36100W 3610W 36 x 120 in White
20
ORANGE/WHITE
STRIPE WS36120O WS36120O 36 x 144 in Orange
WS36120W 3612W 36 x 144 in White
WS8300O 8300 8 x 30 in Orange
WINDSOCK FRAME
SCOTT’S SALES INC
All frames are made of quality steel
COUNT ON EDMO TO HAVE
EXACTLY WHAT YOU NEED,
construction, painted to resist corro-
sion—featuring two sealed ball bearings.
Weight 0.72
Dimensions 13.5 x 7 x 1 in
The PN-1 Navigation Plotter features a classic opaque background and allows
easy identification of WAC and Sectional chart scales. The dual scales are
calibrated in statute and nautical miles.
Weight: 3.2 oz The PJ-1 Rotating Azimuth Plotter measures the true course of a flight and
Dimensions: 11.7 x 5.3 in determines the magnetic course with the twist of the azimuth. Includes scales
for sectional terminal area and WAC charts in statute and nautical miles.
LOGBOOKS
Weight 4 oz
Dimensions 3.25 x 13 in with 3.75 in diameter
GLEIM PILOT LOGBOOK
GLEIM PUBLICATIONS, INC.
EDMO# LOGBOOK
MFR# LOGBOOK
PV-5 PLOTTER The Gleim Logbook simplifies the
JEPPESEN record-keeping process with a simple,
EDMO# AM524409 straightforward design, complete with
MFR# 10009534-000 sections for recording endorsements.
• Includes a complete endorsement
section covering all endorsements
required for student through CFII
• Provides a separate table of contents
with numbered pages for quick
reference
The PV-5 Plotter is designed for use with all Jeppesen en route charts, HARDBOUND PILOT LOGBOOK
including area navigation (RNAV) charts. This plotter shows standard and JEPPESEN
non-standard holding pattern entries as well as providing kilometer to nautical EDMO# 1000131502
mile conversions. MFR# 10001315-002
This Pilot Logbook has become an in-
dustry standard with a highly functional
Weight: 1.6 oz and durable design holding up to ten
years of of data. It features large areas
Dimensions: 3.18 x 8.5 in
for flight-time which are arranged in
accordance with FAA regulations, and
520 flight entries provide room for note
taking. The green colored pages are
easy on the eyes and resists ink bleed
through.
• Includes space for 520 flight entries
• Black cover, light green pages
The IFR/VFR Pilot Kneeboard is a critical piece of gear for pilots of all types of
aircraft. From fighter planes to transporters to rotorcraft and civilian aircraft of
CHECKLISTS all types, the Fly Boys kneeboard allows pilots to keep their checklists in order
and mission-critical documents safely secured.
• Seven eyelets secure many different styles of checklists
• Includes flexible plastic clipboard (removable)
FLIGHT CREW CHECKLIST PAGES
FLYBOYS • Slots for pens and pencils
The FlyBoys Jepp Checklist Pages are • Pockets for ear plugs and plotters
designed to accommodate military • Clear plastic retention strap keeps approach plates visible and secure
standard 8 x 5 inch checklist pages. • Adjustable leg strap allows for secure fit
These checklist pages compliment the
FlyBoys Checklist Book, and is ideal when • Rugged construction stands up to years of use
additional pages are required. Construct- • Available in black, green, blue, and tan
ed from high quality frosted plastic,
the FlyBoys Standard Checklist Pages
are extremely durable, heat and cold
Weight: 10.4 oz
tolerant, and capable of providing years
of trouble-free use in the most demanding Dimensions: 9.1 x 6.6 x 1.7 in
operational environments while providing superior protection for its contents.
CHECKLIST RINGS
FLYBOYS
VFR KNEEBOARD WITH CLIPBOARD
JEPPESEN
EDMO# JS626003
MFR# 10001306-000
Jeppesen’s VFR Tri-Fold kneeboard orga-
nizes and holds charts, flight computers
and plotters, flashlight, pens, pilot notes,
and more. An elastic leg strap sewn to the
The classic, combat-tested FlyBoys Checklist Rings that have been in wide- kneeboard holds this unit comfortably in
spread use throughout the military for many years and are the #1 checklist ring place with a Velcro® closure. Additional-
in use by the US Air Force. Designed to accommodate standard-size checklists, ly, the foam cradled back allows for added
comfort and leg positioning. The metal
21
the FlyBoys Checklist Rings are 1.50 inches when locked, and feature the
FlyBoys-exclusive stainless steel locking mechanism. The ring is constructed clipboard includes valuable informa-
from heavy duty monofilament plastic, ensuring years of trouble-free use in the tion for VFR and IFR flight needs. This
toughest operational environments. kneeboard also includes an additional leg strap—allowing use of the clipboard
independent from the kneeboard. Each kneeboard is made from Dupont’s™
• Pack of 10 rings
heavy-duty, 600D-Denier Cordura® polymer designed for superior strength,
abrasion resistance, and durability.
EDMO# MFR# COLOR
FB1000 BLK FB1000-BLK Black
FB1000 RED FB1000RED-10PK Red Weight: 10 oz
FB1000 WHT FB1000-OPQ White Dimensions: 21 x 11.5 in (open)
IFR TRIFOLD KNEEBOARD • Works with MYGOFLIGHT™ mounts when using the sport-GPS adaptor
JEPPESEN • Dust and moisture resistant electrical components
EDMO# JS626010 • Use as a kneeboard with Kneeboard Accessory mount (sold separately)
MFR# 10001298-000
• *iPad™, AA batteries, and micro USB cord not included.
Jeppesen’s IFR Tri-fold Kneeboard is
great for organizing and holding approach
charts. It includes an aluminum clipboard
with valuable newly-updated IFR flight Weight 9.7 oz (without batteries or iPad)
information printed on the face. It also For use with iPad Air 1st & 2nd generations, iPad Pro 9.7
features three approach chart pockets, iPad Pro 10.5 & 11, iPad Mini 1-5
three collapsible and removable rings
sewn into the reinforced spine, and an
elastic holder for a pen or penlight. Addi-
tionally, the foam cradled back allows for EDMO# MFR# MODEL COMPATIBILITY
added comfort and leg positioning. Each kneeboard includes a free U.S. Low
903482900 0009-0348-2900 iPad Air 1 & 2 / iPad 5th & 6th Gen / iPad Pro 9.7"
Flight Planning Chart and an additional leg strap—allowing use of the clipboard
independent from the kneeboard. Each kneeboard is made from Dupont’s™ 903482925 0009-0348-2925 iPad Pro 11"
heavy-duty, 600D-Denier Cordura® polymer designed for superior strength, 903482950 0009-0348-2950 iPad Pro 10.5"
abrasion resistance, and durability. 903483000 0009-0348-3000 iPad Mini 1-5
ACCESSORIES
9034830141 0009-0348-3014-1 iPad Air carrying case | Includes: adjustable and
removable shoulder strap, large zippered pocket for
Weight: 10 oz active cooling mount and small outer velcro pocket
Dimensions: 10 x 20 in (open) for accessories
9034830151 0009-0348-3015-1 iPad Mini carrying case | Includes: adjustable and
removable shoulder strap, large zippered pocket for
active cooling mount and small outer velcro pocket
for accessories
903480531 0009-0348-0531 Kneeboard Kit | one size fits all elastic velcro strap,
mounting hardware included
TABLET KNEEBOARDS
AIRGIZMOS IPAD KNEEBOARD
AIRGIZMOS
ACTIVE COOLING CASES EDMO# AG-ITEM 44
X-NAUT MFR# KD1
Accessing charts and apps on the iPad
while flying is easier than ever with Air
Gizmo’s iPad Kneeboard. This kneeboard is
constructed with molded plastic and includes
both a wide Velcro strap and elastic band
for a secure and comfortable fit. A fold over
tablet holder keeps a pen and paper handy
to copy clearances, but can be dropped out
of the way as needed. It is designed to work
with both the iPad and the iPad 2.
903482900 903483000
The Active Cooling Case for iPad™ Air/Pro 9.7” prevents unexpected shutdowns Weight 13.1 oz
resulting from overheating while in direct sunlight to keep pilots safe. The Dimensions 7.93 x 9.79 x 3.75 in
self-contained case is vented and has built-in fans, which are aimed at the hot-
test areas of the device to circulate cool air over the back of the iPad. The quiet
fans have been tested to ensure they do not interfere with cockpit electronics.
The X-naut cradle is powered by AA batteries, making it completely wireless,
and can run for over 10 hours on a single set of batteries. Tracking battery
status is easy with a test button and indicator light conveniently located on the
21
side of the mount. Alternatively, a USB charging cable can also provide power
EDMO: BIG SELECTION,
PRODUCTS YOU KNOW &
to the cradle while in use. (AA batteries and USB charging cable not included.)
• Built to last, the case features conformal-coated electronics that resist
moisture and dust, sturdy battery compartment locks, and a spring-loaded
clip-on top making iPad insertion simple and secure.
NAMES THAT YOU TRUST.
• Powered using 8xAA batteries or Micro USB Give us a call at 1.800.235.3300 or visit edmo.com
• Battery test button indicates the condition of the batteries for parts and pricing.
• Spring-loaded latch makes it easy to mount an iPad while holding it securely
in place
• Low noise fans rated at 26 dBA
• Compatible with RAM™
DEDICATED
• Latex-free
• Leak proof
TRAVELJOHN URINAL
REACH GLOBAL INDUSTRIES, INC.
The TravelJohn™ Disposable Urinal bag is
made of strong plastic, that is puncture
resistant, and utilizes the patented LIQSORB®
pouch that instantly absorbs, deodorizes and
disinfects while transforming liquids into an
odorless, spill-proof gel. The unisex adapter
makes it easy for anyone and everyone to use.
• Revolutionary bag with a bag design
• Non-toxic, odorless, spill proof gel
• Unisex plastic collar for easy handling
• 28 oz capacity
21
RESCUE LIGHTS & STROBES hangs discreetly from a life jacket or backpack
• Flexible lashing loops located on the sides
allow for multiple mounting options
• Included Velcro® strap can be secured around
C-LIGHT EMERGENCY DISTRESS LIGHT the lashing loops for additional mounting
ACR/ARTEX options
EDMO# 3963.1
• Included PFD clip conveniently slides over the oral inflation tube and also
MFR# 3963.1
allows for storage inside life jacket
The C-Light™ manually activated personal distress
• Available in a water activated model
light provides 20 lumens of light output and over
30 hours of continues operation. The C-Light • Provides location assistance during low-light emergencies
features a rugged construction, waterproof design • Provides 45 lumen of white, LED lighting
and carries USCG/SOLAS approvals. The twist • Operates continuously for over 120 hours
on and off activation makes this survival light
easy to use in emergency situations for outdoor • Waterproof tested for 24 hours at 1 meter
enthusiasts. • Easy twist On/Off activation
• Slim and lightweight design fits in pockets or • Impact resistant case
hangs discreetly from a life jacket or backpack • Powered by 2xAA batteries (not included)
• Flexible lashing loops located on the sides • USCG/SOLAS Approved
allow for multiple mounting options
• Included Velcro® strap secures around the
lashing loops for additional mounting options
• Included PFD clip conveniently slides over the Weight: 1.2 oz (33 g), without batteries
oral inflation tube and also allows for storage inside life jacket Dimensions: 5.06 x 1.38 x 1.2 in (12.85 x 3.5 x 3 cm)
• Available in a water activated model Operational Life: >120 hr @ 30°C (>100 hr @ -1°C)
Lamp: 45 lumen, white LED
• Provides location assistance during low-light emergencies
Light Type: Strobe
• LED light source provides 20 lumens of white light
Battery: 2xAA batteries, sold separately
22
FIREFLY PRO SOLAS EMERGENCY DISTRESS • Cool white light, without any yellow tenting, transmits more light that is
STROBE LIGHT visible at greater distances
ACR/ARTEX • Energy efficient microprocessor and redesigned electronics maximize the
EDMO# 3970.3 operational life even in harsh conditions
MFR# 3970.3 • Provides 56 hours of continuous strobe operation and 28 hours using the
The Firefly Pro SOLAS emergency distress light is steady-on feature when using a single set of AA lithium batteries; exceeds
capable of producing 41 candela of light per strobe the USCG and SOLAS requirements
for up to 56 hours on AA lithium batteries. With its • comfortably fits inside an inflatable life jacket or pocket
wide light emission LEDs, the Firefly Pro cuts through
• Rugged, military-grade enclosure is able to withstand years of abuse in harsh
foul conditions by creating a super-bright flash which
environments
be seen for over 3.5 miles. Three activation functions
allow users to toggle between the ultra-bright strobe • Easily mount the Firefly Pro to a life jacket, belt, or pack via the two lashing
or S.O.S. strobe, to alert search and rescue, and the loops and included Velcro strap
steady-on feature for close-up recovery operations.
The water activation feature automatically activates
when submerged.
Weight: 2.39 oz (68 g), without batteries
• Innovative wide light emission LEDs produces a Dimensions: 4.4 x 2.2 x 1.2 in (11.7 x 5.7 x 2.8 cm)
360 degree beam with 41 candela of light which is
Operation: Manual on/off switch, and water activation
visible for over 3.5 miles
Strobe Intensity: 41 candela (strobe)
• Cool white light, without any yellow tenting, trans- Strobe Visibility: Over 3 miles
mits more light that is visible at greater distances
Strobe Flash Rate: 60 P/M±
• Energy efficient microprocessor and redesigned electronics maximize the Strobe Operation: 56 hr
operational life — even in harsh conditions
Waterproof: Factory tested to 33 ft. (10 m)
• Provides 56 hours of continuous strobe operation and 28 hours using the Lamp: Cool white LED
steady-on feature when using a single set of AA lithium batteries; exceeds
Certification: SOLAS, USCG, MED, TSO-C85b, IMO LSA, CE
the USCG and SOLAS requirements
• comfortably fits inside an inflatable life jacket or pocket
• Rugged, military-grade enclosure is able to withstand years of abuse in harsh
environments
• Easily mount the Firefly Pro to a life jacket, belt, or pack via the two lashing L8-4 18 PERSONAL RESCUE LIGHT
loops and included Velcro strap ACR/ARTEX
EDMO# 3730.0180
MFR# 3730.0180
Weight: 2.39 oz (68 g), without batteries The L8-4 personal rescue light is a water
Dimensions: 4.4 x 2.2 x 1.2 in (11.7 x 5.7 x 2.8 cm) activated and designed for use on life vests.
Operation: Manual on/off switch, and water activation The light and lens combination produce a
brilliant light that is visible for over one mile.
Strobe Intensity: 41 candela (strobe)
This rescue light can operate in either fresh
Strobe Visibility: Over 3 miles water or saltwater.
Strobe Flash Rate: 60 P/M±
• FAA approved for use on life vests
Strobe Operation: 56 hr
Certification: SOLAS, USCG, MED, IMO LSA, CE
• Produces brilliant light that is visible for over one mile
• Operates in fresh or saltwater
• Standard 18-inch lead wire
• Water activated battery
• 5-year storage life
FIREFLY PRO WATERBUG EMERGENCY
DISTRESS STROBE LIGHT
ACR/ARTEX Weight: 1.8 oz (51 g)
EDMO# 3971.3
Dimensions: 3.1 x 1.8 x 1.6 in (7.9 x 4.6 x 4.1 cm)
MFR# 3971.3
Battery Type: Cuprous iodide/magnesium
The Firefly Pro Waterbug emergency distress strobe
Operation Life: Exceeds 8 hours
is SOLAS approved and features a built-in water
activation sensor which automatically activates upon Stowage Air Life: -30°C to 65°C
submersion. The Waterbug is capable of producing 41 Material: High impact styrene
candela of light per strobe for up to 56 hours on AA Activation: Pull tab, immerse in water to activate
lithium batteries. The wide light emission LEDs cut Waterproof: 10 ft (3 m)
22
through foul conditions by creating a super-bright flash Beam Angle: Horizontal >2°, vertical >15°
which be seen for over 3.5 miles. Four activation func- Visibility: Lamp and lens combo produces brilliant light visible for
tions allow users to toggle between armed mode for over 1 nautical mile (1.85 km)
automatic water activation, ultra-bright strobe or S.O.S. Lamp: Incandescent
strobe to alert search and rescue, and the steady-on Luminous Intensity: ≥1 cd
feature for close-up recovery operations.
Temperature range: -1°C to 30°C, in water
• Water activation feature automatically activates Certification: FAA TSO-C85, UK CAA
when submerged
• Innovative wide light emission LEDs produces a 360
degree beam with 41 candela of light which is visible for over 3.5 miles
Weight: 2.99 oz
White light output: Max Autonomy: 5 lumens at 10 m for 260 hours
Red light output: Proximity: 2 lumens at 5 m for 60 hours
Battery: Three (3) AAA/LR03 batteries
HEADLAMPS Watertightness:
Case Material:
IPX4 (weather resistant)
Plastic
PIXA 2 HEADLAMP
PETZL AMERICA EDMO# MFR# DESCRIPTION
EDMO# E78BHB2UL
MFR# E78BHB 2UL E89AB-A E089FA00 Tactikka+RGB Headlamp | Black
E89AAB E89AAB Tactikka+ Headlamp | Camo
The rugged PIXA 2 headlamp offers
lighting to allow the user to work
comfortably on tasks either up-close or
while moving around in safety. The PIXA
2 uses Constant Lighting technology to
ensure the brightness does not decrease DUO LED 5 HEADLAMP
as the batteries drain. Two lighting
PETZL AMERICA
modes adapt PIXA 2 headlamp for each
EDMO# E69P
situation; low-intensity mode adapts to close-range work with its wide, uniform
MFR# E69P
beam, while the high-intensity mode adapts to movement with a more powerful,
focused beam. The PIXA 2 can be worn on the head, attached with supplied Durable and waterproof, the DUO LED 5
mounting plate, or placed on the ground to provide hands-free work. headlamp has two light sources: a hal-
ogen bulb for focused distance lighting,
• Constant Lighting technology ensures the brightness does not decrease as
and five LEDs for flood beam proximity
the batteries drain
lighting. It is comfortable and simple
• High-intensity mode allows for the user to move around comfortably while to use and with an adjustable elastic
low-intensity mode allows the user to work on close-range tasks headband and a lockable on/off switch
• Automatically switches to reserve mode when the batteries are low prevents accidental operation.
• Ergonomic, rotating knob is easy to operate even when wear gloves • All-terrain, rugged, headlamp that is
waterproof up to 1 meter
• Excellent impact resistance up to two meters
• Two light sources to choose from: halogen light for long-range or focused
• Comfortable and washable elastic headband
lighting with adjustable zoom
• Resistant to chemicals
• Five LEDs for flood beam lighting with a long burn time
• ATEX Zone 2/22 certified headlamp
• Spare halogen bulb in the head of the lamp
22
Weight: 5.64 oz
Lumens: Close range: flood / 20 lumens at 25 m for 26h
Weight: 10.6 oz
Battery: 2 AA/LR06 batteries (included)
Light output: 40 lumens
Watertightness: IP67 (waterproof to -1 meter for 30 minutes)
Run time: 12 hours
Technology: Constant lighting
Beam distance: 24 m
Includes: Flight bag, Flight Computer, FAR/AIM, FAA Test Prep Online-Private
Pilot, Logbook, Pilot Handbook, Plotter, Private Pilot Flight Maneuvers and
Practical Test Prep, Private Pilot FAA Knowledge Test book, Private Pilot
Syllabus book, Private Pilot Training Record book
Includes: Aviation Weather and Weather Services, Flight Bag, FAA Test Prep
Online-Instrument Pilot, Instrument Flight Maneuvers book, 5th Ed., Instrument
Pilot FAA Knowledge Test book, Instrument Pilot Syllabus, Instrument Pilot
Training Record
Includes: Flight bag, Flight computer, FAR/AIM, FAA Test Prep Online-Sport
Pilot, Logbook, Pilot Handbook, Plotter, Sport Pilot Flight Maneuvers ad Practi-
cal Test Prep book, 2nd Ed., Sport Pilot FAA Knowledge Test book, Sport Pilot
Syllabus book, 3rd Ed., Sport Pilot Training Record book
Prep, Commercial Pilot FAA Knowledge Test book, Commercial Pilot Syllabus,
Commercial Pilot Training Record, FAA Test Prep Online-Commercial Pilot
Includes: Private Pilot Manual, Private Test Guide, Private Pilot Practical Test EDMO# MFR DESCRIPTION
Study Guide, Private Maneuvers Manual, Presolo Written Exam, Practical 10001948-R 10001948-R2 Private Pilot Part 61 kit
Test Standard Private SEL, Student Pilot Log Book, Student Flight Computer,
Navigation Plotter (PN-1), Student Flight Bag. 10011887R2 10011887-R2/P Private Pilot Part 141 kit
1001188904 10011889-004 Instrument / Commercial Part 141 Kit
FAR/AIM
FAR/AIM
GLEIM PUBLICATIONS, INC.
EDMO#: FAR/AIM/SM
MFR#: F/A
The FAR/AIM (FAR/AIM/SM) simplifies the un-
derstanding of the complex rules that govern
aviation. This FAR/AIM manual features larger
text, strategically placed indentations, and
two-column formatting to assist in reading,
Includes: Private Pilot Textbook, Private Pilot Maneuvers Manual, Private pilot learning, and understanding the federal regu-
Syllabus, Private Pilot Student Record Folder, Private Pilot Airman Certification lations. A comprehensive FAR index placed in
Standards (ACS), Private Pilot FAA Practical Test Study Guide, Private Pilot the front and an AIM index in the back makes
FAA Airmen Knowledge Test Guide, Student CSG E6B flight computer, PN-1 it easier to find pertinent information of the
Navigation Plotter, Pilot Logbook, Student Flight Bag, Private Pilot FAA Exam FARs or AIMs.
Package. • Convenient size fits in a flight bag
• Reference tabs simplify searching FAR/AIM topics
• Full-color AIM illustrations included
23
TEXTBOOKS
With a wealth of colorful images and an intuitive design, Jeppesen’s Guided Flight Discovery Textbooks are indispensable study aids for student pilots. Each book
provides concise, complete, and logical explanations of their subject matter, followed by review sections and practice quizzes to help students cement their new
knowledge.
• Includes POV insets that provide examples from an instructor’s viewpoint—explaining how to apply concepts in real training situations
• Strategically placed Discovery insets and Human Elements inserts supplement learning and further the student’s understanding of the mind/body/flight connec-
tion
• Designed with FAA Question Insets to reiterate important points in the text
• Summary checklists and review questions are provided at the end of each section
SYLLABUS
The Guided Flight Discovery Syllabuses provides a basic framework for training in their subject areas by introducing topics in a logical sequence complete with
lesson objectives, flight and ground time al-locations, and suggested supporting academic materials for training. Spiral bound construction.
• Syllabuses include: lesson objectives, flight and ground time allo-cations, academic support materials coordinated with pilot training, an enrollment notice, and
graduation certificates
• Intended for use with FAR Part 141 training and can be adapted to FAR Part 61 training
FLIGHT INSTRUCTOR
1000185504 10001855-004 978-0-88487-640-3 Flight Instructor Textbook
1000186506 10001865-006 978-0-88487-033-3 Flight Instructor Syllabus
INSTRUMENT/COMMERCIAL
1000178405 10001784-005 978-0-88487-130-9 Instrument/Commercial Textbook
1000178504 10001785-004 978-0-88487-228-3 Instrument/Commercial Syllabus
MULIT-ENGINE
1000188803 10001888-003 978-0-88487-053-1 Multi-Engine Textbook
1000188503 10001885-003 978-0-88487-054-8 Multi-Engine Syllabus
23
TEST PREP
FAA KNOWLEDGE TEST BOOKS
GLEIM PUBLICATIONS, INC.
The Gleim FAA Knowledge Test books are essential study aids for the FAA Knowledge Tests. These books include Gleim’s Knowledge Transfer Outlines, which are
present at the beginning of each study unit. Each outline presents the information covered in previously released FAA test bank questions along with information
regarding more recent FAA reference materials. Each section also provides practice FAA knowledge tests to help the student better prepare for the exam in terms
of the information covered and the types of questions being asked.
• Reviews images from the FAA Testing Supplement
• Provides practice FAA knowledge tests & proposes study tips and techniques
• Appendixes contain additional study questions
• Written by Irvin N. Gleim Garrett W. Gleim
AIRLINE TRANSPORT PILOT FAA KNOWLEDGE TEST PERTAINS TO THE FOLLOWING TESTS:
ATM: Airline Transport Pilot Multiengine Airplane (121), ATS: Airline Transport Pilot Single Engine (135), ADX: Aircraft Dispatcher,
ARA: Airline Transport Pilot Part 135 – added rating
PRIVATE PILOT & RECREATIONAL PILOT FAA KNOWLEDGE TEST PERTAINS TO THE FOLLOWING TESTS:
Private Pilot – Airplane (PAR), Recreational Pilot – Airplane (RPA), Private Pilot – Airplane Transition (PAT)
Jeppesen’s Test Guides provide all the information needed for students
preparing to take their FAA Knowledge Tests. Each book is specific to a certain
test and contains test questions, answers, explanations for the answers, and
references for further study.
• Each book pertains to a specific manual / FAA test
23
ISBN: 978-1-58194-190-6
ISBN: 978-0-88487-182-8
ISBN: 978-0-88487-201-6
ISBN: 978-0-88487-330-3
WEATHER DOCUMENT
ORGANIZATION
AVIATION WEATHER & WEATHERSERVICES
GLEIM PUBLICATIONS, INC.
EDMO# AVW-5 GFD INSTRUMENT/COMMERCIAL RECORD
MFR# AVW FOLDER
Aviation Weather & Weather Services is a JEPPESEN
reference book containing an up-to-date EDMO# 1000179402
compilation of the FAA’s weather publica- MFR# 10001794-002
tions including the FAA’s Aviation Weather The GFD Instrument/Commercial Record
(AC 00-6A) and Aviation Weather Services Folder provides a tidy, effective way for stu-
(AC 00-45G) along with other Advisory dent pilots to keep track of ground lessons,
Circulars. This book is an excellent aid for written exams, flight maneuvers, and flight
students preparing for the oral portion of checks during their instrument/commercial
their instrument rating practical test. rating training.
• Explains common weather-related terms • Meets the requirements of both FAR Part
using the FAA weather glossary 141 and FAR Part 61
• Includes high-quality color images • Includes 1 folder
TRAINING TOOLS
FOGGLES COUNT ON EDMO TO HAVE
FOGGLES INC EXACTLY WHAT YOU NEED,
IFR training Foggles are designed to limit
the pilot’s field of vision, encouraging the WHEN YOU NEED IT.
pilot to fly with only the help of the flight
instruments. The polycarbonate lenses
are frosted to partially block the wearer’s As a class-leading aviation distributor, EDMO keeps
field of vision. The open area is just large pace with the trends of the aerospace industry.
enough to allow the pilot in training to have 6161
a full view of the instrument panel. Foggles We’re constantly updating our inventory with our
are light, comfortable, and easy to wear manufacturers’ latest products, so there’s a good
because they are designed like regular
glasses.
chance we will have what you’re looking for.
• Constructed with shatterproof plastic
and includes a protective case
Give us a call at 1.800.235.3300 or visit edmo.com
for parts and pricing.
6162
Weight: 1.6 oz
Dimensions: 7.7 × 6.4 × 1.6 in (pouch size)
EDMO#
6161
6162
MFR#
6161
6162
COLOR
Clear
Yellow
INDUSTRIOUS
#AVGEEK T-SHIRT
APPAREL RUNWAY THREE-SIX
Runway THREE-SIX believes the glory of
aviation should be celebrated through style
and expression. The “#avgeek” with model
PILOT IN TRAINING T-SHIRT and plane is printed on a polyester/cotton/
BORN AVIATION PRODUCTS INC rayon blend t-shirt.
Perfect for a future Air Force pilot, this • Natural and synthetic blend material
toddler shirt displays a commercial jet • Screen printed
and private aircraft happily passing each
other against the sky-blue shirt, while • Red t-shirt color
“pilot in training” floats on fluffy white
clouds in the background. EDMO# MFR# SIZE
R36-AVG-MM #avgeek lady- Men’s Medium Men’s Medium
R36-AVG-ML #avgeek lady- Men’s Large Men’s Large
R36-AVG-MX #avgeek lady- Men’s X-Large Men’s X-Large
R36-AVG-M2 #avgeek lady- Men’s 2X-Large Men’s 2X-Large
EDMO# MFR# SIZE
KW-PT-2T KW-PT2T 2T
KW-PT-4T KW-PT4T 4T
CF-PK-3T CF-PK-3T 3T
CF-PK-4T CF-PK4T 4T
Whether it’s a short flight or those far away, EDMO has all the necessary pilot supplies to keep you comfortable
24
and prepared. Not finding what you need? Give us a call at 1.800.235.3300 or view our full inventory at edmo.com.
PATCHES
APOLLO EMBLEM MANUFACTURER
High quality embroidered emblem patch.
BEECH1900S BEECH1900-SP Beechcraft 1900
EDMO# MFR# SIZE
3013 3013 4 x 2 in
AVIATION PINS
JOHNSON’S
PIPER1ST-S AV-PIPER1ST-CTS Piper First Solo 3D
EDMO# MFR# PLANE
A320-TG AV-A320-TG Airbus A320 2D
WINGS EARRINGS
JOHNSON’S JOHNSON’S
Flight wings pin accessory for uniforms and other clothing.
EDMO# MFR# STYLE
EDMO# MFR# SIZE BIPLEAR-G AV-BIPLEARRING-GP Bi-plane
WING4140-G AV-WNG-4140-G 3 in
WING4140-S AV-WING-4140-S 3 in
WNG-4294-S AV-WNG-4294-S 2 in
WNG1-TS AV-WING1-THS 1 in
WNG1-TN AV-WNG1-TN 1 in
LPROPWG-TG AV-WNG-LGPROP-TG -
These dual-time clocks use two sets of hands to indicate 12- and 24-hour
time. The case is constructed of high impact polystyrene and has a snap-in,
polystyrene lens. The high quality, quartz movement is powered by one AA
alkaline battery.
• Separate hands indicate 12 & 24 hour time
• Independently set 24 hour hand to GMT or a time-zone of choice
9062 9063 9064 • Injection molded high impact polystyrene case
• Snap in polystyrene lens
10-INCH WALL CLOCKS • High quality American made Quartz Clock Movement
• One "AA" battery required
• Available in Dispatch or Zulu time & 10- and 14-in sizes
DS60 DS63
Each alarm clock and pen set includes removable alarm clock that features a
classic aviation dial and pen that is vertically stationed in a well crafted base.
The alarm clock base is constructed with an injection molded, high-impact
polystyrene and features a glass lens for durability and scratch resistance. The
precise quartz movement is powered by one AA alkaline battery.
• One (1) AA battery required
• Clock: 3.5 x 3.5 x 1 inch / Base: 2.125 x 7.25 inch
COASTERS MAGNETS
MODERN 4-PIECE ROUND INSTRUMENT CLASSIC FRIDGE MAGNETS
COASTER SET TRINTEC INDUSTRIES INC
TRINTEC INDUSTRIES INC
EDMO# 9010COAST
MFR# 9010
Designed to look like primary cockpit flight instruments, these fun magnets will
make excellent gifts for aviators and aviation mechanics. They are two inches
These Modern Round Coasters are made of clear acrylic and have four rubber square, made with molded ABS, and come with a scratch-resistant lens.
feet on the underside ensuring stability and avoiding surface damage.
• Set of four round coasters EDMO# MFR# STYLE INSTRUMENT
• 3.875-inch, diameter FM60 FM60 Classic Altimeter
FM61 FM61 Classic Airspeed Indicator
FM62 FM62 Classic Direction Gyro
CLASSIC 4-PIECE INSTRUMENT COASTER SET FM63 FM63 Classic Artificial Horizon
TRINTEC INDUSTRIES INC FM64 FM64 Classic VOR
EDMO# 9075
FM65 FM65 Classic HSI
MFR# 9075
These Classic Instrument Coasters are made with a tough polystyrene frame,
a black rubber anti-skid base, and closely resemble primary cockpit flight KEYCHAINS
instruments.
• Set of four coasters
FLIGHT INSTRUMENT KEYCHAIN
• 3.375 x 3.357 inches TRINTEC INDUSTRIES INC
SLOGAN KEYCHAINS
BORN AVIATION PRODUCTS INC
LICENSE PLATES & FRAMES
LICENSE PLATE FRAMES
DIXIE SEAL & STAMP CO, INC
These six-inch keychains are made from extremely strong nylon webbing fabric
and printed with popular aviation slogans.
PROPWASH BEAR
LEGENDARY
BORN AVIATION PRODUCTS INC
EDMO# SA-PROP
MFR# SA-PROP
The Propwash Bear is an exceptionally
dapper plush tow dressed in miniature
aviation garb—complete with bomber jacket,
removable googles, and a scarf adorned
with his name. This cream-colored bear is
14-inches tall.
8
V12 0 V4 4
V12 0
448
V2- 4
20
V
V4
97
V25
3
12
V1
4
V4 4
V281
V3
04
57
V2
12
V1
6
53
4
V4 4
V
© EDMO Distributors, Inc. ISO 9001/AS9120