Professional Documents
Culture Documents
aerospace
climate control
electromechanical
filtration
fluid & gas handling
hydraulics
pneumatics
process control
sealing & shielding
DISTRIBUTION NETWORK
At Parker, we have the largest global distribution
network in motion and control, with over 7,500
distributors serving more than 422,000 customers.
To find the distributor nearest you, please
visit our DISTRIBUTOR LOCATOR at
http://www.parker.com/pneu/distributor
! WARNING
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN
OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.
This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide
product and/or system options for further investigation by users h aving technical expertise. It is important that you analyze all
aspects of your application including consequences of any failure, and review the information concerning the product or system
in the current product catalog. Due to the variety of operating conditions and applications for these products or systems, the
user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and
assuring that all performance, safety and warning requirements of the application are met.
The products described herein, including without limitation, product features, specifications, designs, availability and pricing,
are subject to change by Parker Hannifin Corporation and its subsidiaries at any time without notice.
Offer of Sale
The items described in this document are hereby offered for sale by Parker Hannifin Corporation, its subsidiaries or its
authorized distributors. This offer and its acceptance are governed by the provisions stated on the separate page of this
document entitled “Offer of Sale”.
© Copyright 2010-2005 Parker Hannifin Corporation. All Rights Reserved
Introduction
Introduction A
Preparation
Global Air
B
Systems
Global Air Preparation System www.parker.com/globalfrl
Regulators,
Lubricators
C
Filters,
Filters, Regulators, Lubricators www.parker.com/pneu/frl
Stainless
Stainless Steel FRLs D
Steel
FRLs
www.parker.com/pneu/ssfrls
Regulators
Precision
Precision Regulators www.parker.com/pneu/precreg E
Proportional
Regulators
Proportional Regulators
(P31P, P32P & PARTM-15) F
“LV” / “EZ”
LV / EZ Lockout Valves
G
Lockout
Valves
www.parker.com/pneu/lockout
(Lockout Valves)
Integrated
H
Fittings
Integrated Fittings
Accessories
Accessories www.parker.com/pneu/accessories J
Ball Valves /
Plug Valves
Ball Valves / Plug Valves www.parker.com/pneu/ball K
Couplings
Quick Couplings L Quick
Hose and
M
Fittings
N
Fittings
P
Model to
Index
Filters, Regulators,
Lubricators
Mini, Prep-Air® II, General Line
Section C
www.parker.com/pneu/frl C
Selection
Product
Filters
Coalescers
Regulators
Regulators
Filter /
Lubricators
Combos
Accessories
C
Selection
Product
Filters
Coalescers
Regulators
Regulators
Filter /
Lubricators
Combos
! CAUTION:
Accessories
Polycarbonate bowls and sight domes, being transparent and tough, are ideal for use with Filters and Lubricators. They are suitable for use
in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact blow, nor
temperatures outside of the rated range. As with most plastics, some chemicals can cause damage. Polycarbonate bowls and sight domes
should not be exposed to chlorinated hydro-carbons, ketones, esters and certain alcohols. They should not be used in air systems where
compressors are lubricated with fire-resistant fluids such as phosphate ester and di-ester types.
Metal bowls are recommended where ambient and/or media conditions are not compatible with polycarbonate bowls. Metal bowls resist
the action of most such solvents, but should not be used where strong acids or bases are present or in salt laden atmospheres. Consult
the factory for specific recommendations where these conditions exist.
TO CLEAN POLYCARBONATE COMPONENTS USE MILD SOAP AND WATER ONLY! DO NOT use cleansing agents such as acetone,
benzene, carbon tetrachloride, gasoline, toluene, etc., which are damaging to this plastic.
Metal bowl guards are recommended for all applications.
! CAUTION:
REGULATOR PRESSURE ADJUSTMENT – The working range of knob adjustment is designed to permit outlet pressures within their full
range. Pressure adjustment beyond this range is also possible because the knob is not a limiting device. This is a common characteristic
of most industrial regulators, and limiting devices may be obtained only by special design.
C
E
A
R
T
A
E
T
R
O P3TF X X Aluminum Body Water Separator C9
Selection
R
Product
S
Combos
14F X X X X — 1 oz. Std. — Opt. Opt. C14
Filters
F 06F X X X X X X 4.4 oz. Opt. — Std. Opt. C18
I
L
T 07F X X X X X X 7.2 oz. Opt. — Std. Opt. C20
Coalescers
E
R
S P3NF X X X — — X 18 oz. Opt. — Std. Opt. C22
Regulators
35F X X — X — 27.5 oz. Std. — — — C30
Regulators
Filter /
02F X Nylon Housing — Grade 6, Grade 10 C35
Lubricators
10F X X X X — 1 oz. Grade 6 Std., Grade 10 Opt. C36
Accessories
C 11F X X X X X X 4.4 oz. Grade 6 Std., Grade 10 Opt. C40
O
F
A
I
L 12F X X X X X X 7.2 oz. Grade 6 Std., Grade 10 Opt. C42
L
E
T
S
E
C P3NF X X X — — X 18 oz. Grade 6 Std., Grade 10 Opt. C44
R
I
S
N 32 oz.
G F701 X X — X X Grade 6 Std., Grade 10 Std. C46
100 oz.
R24 /
X X — — — Std. — Std. — — Std. — — — — C60
R25
Filters
R45 /
X X — — Std. — — Std. — — Std. — — — — C62
R46
Coalescers
R
D 05R X X — — — Opt. — Std. — — Std. — — Opt. — C68
R
E
G
U 06R X X X — — — — — Std. — — Std. — — — Opt. C70
Regulators
Filter /
L
A
T 07R X X X — — — — — Std. — — Std. — — — Opt. C72
O
R
Lubricators
S
P3NR X X X — — — — — Opt. — — Std. — — — Opt. C74
10R X X * * * * * * * * * * * * * C82
11R X X X * * * * * * * * * * * * * C84
P
I
L 12R X X X * * * * * * * * * * * * * C86
O
T
P3NR X X X * * * * * * * * * * * * * C88
R119 X X X X X X * * * * * * * * * * * * * C90
F 14E X X X X — 1 oz. Std. — Opt. Opt. Opt. — Opt. Opt. — Std. — — C98
I
L
T B34 X X X X X X Opt. — Opt. — Opt. — Std. — — C100
E
R
/
05E X X X X X 2 oz. Opt. — Std. Opt. — — Opt. Std. — Std. Opt. — C102 C
R
E 06E X X X X X X 4.4 oz. Opt. — Std. Opt. — — Std. Std. — Std. — Opt. C104
G
Selection
Product
U 07E X X X X X X 7.2 oz. Opt. — Std. Opt. — — Std. Std. — Std. — Opt. C105
L
A
T P3NE X X X — — X 18 oz. Opt. — Std. Opt. — — — Std. — Std. — Std. C108
O
R 6 10
12E X X X — X — 7.2 oz. — — — — Opt. Opt. — Std. — Opt. C110
Combos
S Std. Opt.
M
I 15L X X X X X 2 oz. Cannot be filled under pressure C114
C
R
O 16L X X X X X X 2.6 oz. Cannot be filled under pressure C116
Filters
M
L I
U S 17L X X X X X X 4.9 oz. Cannot be filled under pressure C118
B T
R
Coalescers
I 02L X X Aluminum Body .25 oz. Cannot be filled under pressure C123
C
A 04L X X X X — 1 oz. Cannot be filled under pressure C124
T 06L X X X X X X 2.9 oz. Can be filled under pressure C126
O
R M 07L X X X X X X 6 oz. Can be filled under pressure C128
Regulators
S I P3NL X X X — — X 18 oz. Can be filled under pressure C130
S
T 16 oz.
L606 X X X X — X X 32 oz. Can be filled under pressure C132
64 oz.
Regulators
1 Qt. Std.
09L X — — X Can be filled under pressure C136
Filter /
3 Qt. Opt.
14G X X X X — 1 oz. Two-Unit Opt. Opt. Opt. — Std. — —
C140
14A X X X X — 1 oz. Three-Unit Opt. Opt. Opt. — Std. — —
Lubricators
15G X X X X X 2 oz. Two-Unit — Opt. Std. — Std. Opt. —
C142
N 15A X X X X X 2 oz. Three-Unit — Opt. Std. — Std. Opt. —
I 06G/16G X X X X X X 2 oz. Two-Unit — — Std. — Std. — Opt.
P
P 06A/16A X X X X X X 2 oz. Three-Unit — — Std. — Std. — Opt.
Accessories
L C148
E 07G/17G X X X X X X 2 oz. Two-Unit — — Std. — Std. — Opt.
D 07A/17A X X X X X X 2 oz. Three-Unit — — Std. — Std. — Opt.
C
O P3N3A X X X — — X 18 oz. Two-Unit — — Std. — Std. — Std.
M C154
P3N3B X X X — — X 18 oz. Three-Unit — — Std. — Std. — Std.
B
O C628 X X X X — X X 32 & 16 Three-Unit — — — — Std. — Std. C159
S
15H X X X X X 2 oz. Two-Unit — Opt. Std. — Std. Opt. —
C144
15B X X X X X 2 oz. Three-Unit — Opt. Std. — Std. Opt. —
M
O 06H/16H X X X X X X 2 oz. Two-Unit — — Std. — Std. — Opt.
D 06B/16B X X X X X X 2 oz. Three-Unit — — Std. — Std. — Opt.
U C150
L 07H/17H X X X X X X 2 oz. Two-Unit — — Std. — Std. — Opt.
A 07B/17B X X X X X X 2 oz. Three-Unit — — Std. — Std. — Opt.
R
P3NCA X X X — — X 18 oz. Two-Unit — — Std. — Std. — Std.
C156
P3NCB X X X — — X 18 oz. Three-Unit — — Std. — Std. — Std.
Features
• Tested in Accordance with ISO 8573.9.
• High Liquid Removal Efficiencies at All Flow Conditions.
• Low Pressure Losses for Low Operational Costs.
• Multiple Port Sizes for a Given Flow Rate Provides Increased
C Flexibility During Installation.
• Suitable for Variable Flow Compressors.
• Works with All Types of Compressor and Compressor Condensate.
Selection
Product
• Low Maintenance.
• Lightweight Cast Aluminum Housing with 1/4" to 3" Ports.
• External Surface Epoxy Painted for Maximum Corrosion Resistance.
Filters
Coalescers
Applications
P3TFA98WEAN • Bulk Liquid Removal at Any Point in a Compressed Air System
• Protection of Refrigeration and Heatless Regenerative Desiccant Dryers
Regulators
Ordering Information
P3TF A 9 2WA A N
Combos
Selection
Product
• Bulk Liquid is Removed From the Airstream Due to:
– Directional Changes of the Airstream
– Velocity Changes
– Centrifugal Action of the Vortex
Filters
• As the Vortex Reaches the Bottom of the Module,
Air is Forced Through The Center of the Vortex.
• Aerospace Turning Vanes, Located in the Outlet of
Coalescers
the Separator Module, Turn an Inefficient Corner Flow
Into a Number of More Efficient Corners. Average P3TF Efficiency
100.00
• Turning Vanes Reduce Turbulence, Minimizing 90.00
Separation Efficiency %
Regulators
80.00
70.00
• The Number of Vanes Required is Dependent Upon 60.00
the Conduit Diameter. 50.00
40.00
Regulators
30.00
Filter /
20.00
10.00
0.00
25 50 75 100
Specifications
Lubricators
% of Rated Flow
Pressure Differential at Rated Flow...... 1.0 PSID (0.07 bar)
Maximum Weight
Model Pipe SCFM Operating
Operating Pressure Lb.
Number Size (L/s) Temperature
Combos
psig (bar) (kg)
21 0.9
P3TFA92WAAN 1/4"
(10) (0.4)
85
Accessories
2.2
P3TFA93WBAN 3/8"
(1.0)
(40)
85 2.2
P3TFA94WCAN 1/2"
(1.0)
(40)
233 Maximum 4.8
P3TFA96WDAN 3/4"
(110) 176°F (80°C) (2.2)
232 (16)
233 Minimum 2.6
P3TFA98WEAN 1
(110) 35°F (1.5°C) (5.7)
742 5.3
P3TFA9BWGAN 1-1/2"
(350) (11.6)
742 5.3
P3TFA9CWHAN 2"
(350) (11.6)
1695 12.0
P3TFA9EWKAN 3"
(26.4)
(800)
Stated flows are for operation at 102 psig (7 bar) with reference to 20°C, 1 bar (a),
0% relative water vapor pressure.
A K A K
J J G
B
CL Pipe
C C
C
E
Selection
Product
F D
(BSPP)
Filters
Dimensions
Coalescers
Materials of Construction
Automatic Float Drain............................................................ Plastic
Housing / Bowl................................................................... Aluminum
Seals...............................................................................Fluorocarbon
For External Drains, please reference WDV3-G Wall Mounting Bracket Kit
Automatic Electrical Drain or ED Zero Loss Drain Mounting brackets provide additional support to filters installed in
flexible piping systems or OEM equipment.
C
11.25
• High liquid removal efficiencies (286)
Selection
(1235)
Product
40.38
• Works with all types of 37.25
(946)
(1026)
Filters
P3TF Series
painted for maximum P3TFAFFW2AN P3TFAFGW3AN
corrosion resistance
Coalescers
Bulk Liquid Separators Operating Information
Port Flow P3TF Series
Part Number
Regulators
Size SCFM
Operating Pressure: 232 PSIG (16 bar)
4" Flange 2119 P3TFAFFW2AN Operating Temperature: 35°F to 150°F (1.5°C to 66°C)
6" Flange 3814 P3TFAFGW3AN
Regulators
Filter /
Service Kits
Description P3TF Series
Dp Gauge Replacement Kit DPG-Kit
Lubricators
Materials of Construction
Drain Kit - 1/2" NPT HDF-120-NPT-A
Body .......................................................................................... Steel
Baffle ............................................................................... Plated Steel
Deflector........................................................................... Plated Steel
Combos
Seals .............................................................................. Fluorocarbon
Stud................................................................................... Plated Steel
Accessories
Ball Valve Assembly
(Shipped loose)
Approx.
6.69
(170)
Drain Kit
(Shipped loose)
4.25
(108)
C
Selection
Product
Filters
Coalescers
Regulators
Regulators
Filter /
Lubricators
Combos
Accessories
C
7
5
Air filters are designed to remove airborne solid .3
4
contaminants, pipe scale, rust, pipe dope, etc.,
Selection
Product
.2 3
which may plug small orifices or cause 2
excessive wear and premature failure of .1
1
Flow Characteristics
05F22A*
pneumatic components. 0 0
3/8 Inch Ports
0 20 40 60 80 100 120 140
Filters
• Miniature 02F Series, 1/4 Inch 0 10 20
Flow - SCFM
30 40 50 60
Coalescers
• Economy 05F Series, 1/4 and 3/8 Inch
• Compact 06F Series, 1/4, 3/8 and 1/2 Inch Once the required flow is determined for a pneumatic
• Standard 07F Series, 3/8, 1/2 and 3/4 Inch application, the filter can be selected by using the flow
Regulators
chart. To read the filter flow chart, first determine the
• Hi-Flow P3NF Series, 3/4, 1 and 1-1/2 Inch inlet pressure that will be used. Find the appropriate
pressure curve on the graph. Each graph will contain
• Hi-Flow F602 Series, 3/4, thru 2 Inch three pressure curves. If the required inlet pressure is
Regulators
Filter /
not on the graph, interpolate a similar curve for the
• Hi-Flow 35F Series, 1-1/2 and 2 Inch required pressure. Next, determine the acceptable
• Hi-Flow 43F Series, 3 Inch pressure drop across the filter and locate it on the
vertical axis. Find the intersection point of the
Lubricators
acceptable pressure drop and the inlet pressure curve.
Filter Selection At this point follow a vertical path downward to view
the flow in SCFM. If the flow is too low, select a larger
1. Determine maximum system flow
port size or body size to give the required flow. If the
requirements.
Combos
flow is higher than necessary, select a smaller port
2. Determine maximum allowable pressure size or body size to give the required flow.
drop at rated flow in SCFM.
Accessories
3. Refer to flow chart and select filter pipe
size by choosing curve that offers minimum
pressure drop at desired flow in SCFM. For
optimum performance, a 2 to 5 psig pressure
drop should be selected.
Particulate Filters:
For the removal of solid particle contaminants down to
5 microns and the separation of bulk liquids.
This type of filter is generally used in industrial
applications where liquid water and oil, and harmful dirt
particles must be removed from the compressed air
system. This type of filter should also be used as a
prefilter for the Coalescing (oil removal) filter. A
the air does not pass directly through the filter element
(D) until the large particles and liquids are removed.
F
The baffle (E) separates the lower portion of the bowl G
into a “quiet zone” where the removed liquids and
Coalescers
(Overnight Drain) (Spitter Drain) The float internal to this drain rises with
This drain offers a semi-automatic The diaphragm in this drain pulses increased liquid level. When the float
function when there is a differential when there is a pressure differential rises, it opens a seat area allowing the
pressure in the filter which occurs such as a valve cycling or cylinder trapped liquids to drain through the
when system pressure is shut off. The stroking downstream. This action bottom.
drain can also be used manually by flexes the diaphragm and allows the A manual override can be pushed in
gripping it with your fingertips and filter to drain the entrapped water. the bottom of the drain to unseat the
pushing upward. float if particulates create a block.
Specifications
Flow Capacity*.........................................17 SCFM (8 dm3 /s)
Operating Temperature..............32° to 150°F (0° to 65.5°C)
Maximum Supply Pressure.....................200 psig (13.8 bar)
Standard Filtration................................................... 5 Micron C
Port Size NPT / BSPT........................................................ 1/4
Selection
Weight lb. (kg).............................................. 0.13 lb. (0.06 kg)
Product
* Inlet pressure 90 psig (6.2 bar). Pressure drop 5 PSID (0.3 bar).
“F” Series Filters, Type “A” 5 micron elements: All Parker
5 micron elements meet or exceed ISO Class 3 for maximum
Application particle size and concentration of solid contaminants.
Filters
This small, aluminum in-line filter is designed to
provide protection for portable pneumatic hand tools. It Materials of Construction
weighs only 2 ounces with a throw-away filter element
Coalescers
Body........................................................................Aluminum
rated at 5 micron. Either port may be used as the inlet
Baffle.......................................................................Aluminum
port. Flow is 17 SCFM (10.3 dm3 /s) at 90 psig (6.2 bar)
inlet pressure with 5 psig (0.3 bar) pressure drop. Filter Element......................................Sintered Polyethylene
Seals...............................................................................Nitrile
Regulators
Replacement Element Kits
Regulators
Filter /
5 Micron........................................................................ PS436
Lubricators
A
B
C
Combos
Part Number 02F Filter Dimensions
Accessories
02F1BA
PSID
bar
Inches (mm)
4
3
0.2
0.1
1
Ordering Information 0 0
0 5 10 15 20 25 SCFM
Port Size 5 Micron 0 2 4 6 8 10 12 dm3/s
1/4" 02F1BA AIR FLOW RATE
Features A
Twist Automatic
Drain Drain • Excellent water removal efficiency.
• Unique deflector plate that creates swirling B
of the air stream ensuring maximum water
and dirt separation.
C
C
• Easily disassembled for servicing without
the use of tools.
• 5 micron element standard.
Selection
1/8"
1/4" 14F13BB 14F17BB E† F
4.26 1.60
Standard part numbers shown bold. (108) (41)
Lubricators
Ordering Information
Accessories
14F 1 1 B B —
Technical Information
.4 6
5
.4
.3
6
5 C
.3 4
4
Selection
3 .2 3
Product
.2
2 2
Flow Characteristics .1 Flow Characteristics
.1 14F11B*
1 14F01B* 1
1/8 Inch Ports 1/4 Inch Ports
0 0 0 0
0 5 10 15 20 25 30 35 40 0 5 10 15 20 25 30 35 40
Flow - SCFM Flow - SCFM
Filters
0 5 10 15 0 5 10 15
3
3 Flow - dm /s
Flow - dm /s n
n
Coalescers
Regulators
Regulators
Filter /
14F Filter Kits & Accessories Materials of Construction
Bowl Kits – Body...............................................................................................Zinc
Lubricators
Poly Bowl –
Bowls........................................................Transparent Polycarbonate
Automatic Pulse Drain..................................................PS408BP
Metal (Zinc) Bowl w/o Sight Gauge
Twist Drain...................................................................... PS404P
Deflector, Element Holder & Baffle .........................................Plastic
Metal Bowl –
Automatic Pulse Drain.................................................. PS451BP Drains –
Twist Drain –
Combos
Twist Drain....................................................................PS447BP
Body & Stem......................................................................Plastic
Filter Element Kits –
Seals................................................................................... Nitrile
40 Micron............................................................................ PS401P
5 Micron.............................................................................. PS403P Automatic Pulse Drain –
Accessories
5 Micron Cartridge Kit......................................................... PS407P Piston & Seals..................................................................... Nitrile
Adsorber.............................................................................. PS452P Stem, Seat, Adaptor & Washers.................................. Aluminum
Mounting Bracket Kit.......................................................... PS417BP Filter Elements –
5 Micron (Standard)...............................................................Plastic
Specifications 40 Micron (Optional)..............................................................Plastic
Automatic Pulse Drain Tube Barb ...................................... 1/8 Inch Adsorber (Optional)...........................................Activated Charcoal
Features A
Twist Automatic
Drain Drain • Excellent water removal efficiency.
B
• Unique deflector plate and shroud creates a
swirling of the air stream ensuring maximum
water and dirt separation. C
Pulse Drain D
• Shown with recommended
metal bowl guard.
s
• High Flow: 1/4" – 54 SCFM §
m
Filters
3/8" – 70 SCFM §
e
Distance Required
it
Accepts F To Remove All Bowls
Regardless Of
t
1/8" Tubing Drain Option
u
Coalescers
d o t e
Port NPT 05F Filter
e e
Size Dimensions
y
Twist Drain Automatic Pulse Drain
a ol
Poly Bowl‡ / Metal Guard A B C
Gr e obs
Regulators
ar
5.35 5.91 2.25
Regulators
1/4"
Inches (mm)
3/8" 05F24A* 05F2TA*
† WithTwist or
Standard part numbers shown bold. Automatic Pulse Drain
For other models refer to ordering information below.
Lubricators
pressure drop.
Combos
Ordering Information
Accessories
05F 1 2 A A — —
9 9
.6 .6
8
C
.5 .5
7 7
.4 6 .4 6
5 5
.3 .3
4 4
Selection
Product
.2 3 .2 3
2 2
.1 Flow Characteristics .1 Flow Characteristics
1 05F12A* 1 05F22A*
s
1/4 Inch Ports 3/8 Inch Ports
0 0 0 0
m
0 10 20 30 40 50 60 70 80 90 0 20 40 60 80 100 120 140
Flow - SCFM
Filters
Flow - SCFM
it e
0 5 10 15 20 25 30 35 40 0 10 20 30 40 50 60
3 3
Flow - dm /s
t
Flow - dm /s
n n
Coalescers
e d o t e
ay ol e
Gr e obs
Regulators
05F Filter Kits & Accessories Specifications
ar
Bowl Guard Kit...................................................................... PS905P Bowl Capacity ..................................................................2.0 Ounces
Regulators
Filter /
Bowl Kits – Sump Capacity ...................................................................0.9 Ounce
Poly Bowl – Port Threads .................................................................. 1/4, 3/8 Inch
Automatic Pulse Drain.................................................... PS995P
Twist Drain...................................................................... PS932P Pressure & Temperature Ratings –
Without Differential Pressure Indicator:
Lubricators
Metal Bowl –
Automatic Pulse Drain.................................................... PS997P Polycarbonate Bowl – 0 to 150 psig (0 to 10.3 bar)
Twist Drain...................................................................... PS934P 32°F to 125°F (0°C to 52°C)
Sight Gauge / Automatic Pulse Drain............................. PS996P Metal Bowl – 0 to 250 psig (0 to 17.2 bar)
Sight Gauge / Twist Drain............................................... PS935P 32°F to 175°F (0°C to 80°C)
Combos
DPI Replacement Kit .............................................................PS781P With Differential Pressure Indicator: 0 to 150 psig (0 to 10.3 bar)
Drain Kit – 32°F to 125°F (0°C to 52°C)
Automatic Pulse Drain.................................................... PS998P Automatic Pulse Drain – 10 to 150 psig (0.7 to 10.3 bar)
Semi-Auto Drain...............................................................PS511P Weight ........................................................................ 1.2 lb. (0.54 kg)
Accessories
Twist Drain...................................................................... PS512P
Push ‘N’ Drain................................................................. PS513P Materials of Construction
Filter Element Kits – Body ..............................................................................................Zinc
40 Micron ........................................................................... PS901P
5 Micron.............................................................................. PS902P Bowls .................................................. Transparent Polycarbonate or
Adsorber.............................................................................. PS931P Metal (Zinc) With or Without Sight Gauge
Features A
Twist Automatic
Drain Drain • Excellent water removal efficiency.
• Unique deflector plate and shroud creates a B
C
C
• Large filter element surface guarantees low
pressure drop and increased element life.
• Optional automatic float drain available.
E
Selection
Distance Required
F To Remove All Bowls
Regardless Of
Drain Option
Coalescers
pressure drop.
Combos
Ordering Information
Accessories
06F 1 2 A C — —
.4 6
.4 6
5
5
.3
.3
4
4
.2 3
.2 3
2
2
C
.1
.1
Flow Characteristics 1 Flow Characteristics
1 06F22A*
06F12A*
1/4 Inch Ports 3/8 Inch Ports
0 0
0 0 0 10 20 30 40 50 60 70 80 90 100 110
0 10 20 30 40 50 60 70 80
Flow - SCFM Flow - SCFM
0 5 10 15 20 25 30 35 0 5 10 15 20 25 30 35 40 45 50
Selection
3 3
Flow - dm /s
Product
Flow - dm /s n
n
Filters
.4 6
Pressure Drop - PSIG
Pressure Drop - bar
5
.3
4
Coalescers
.2 3
2
.1
1 Flow Characteristics
06F32A*
1/2 Inch Ports
0 0
0 10 20 30 40 50 60 70 80 90 100 110 120 130
Regulators
Flow - SCFM
0 5 10 15 20 25 30 35 40 45 50 55 60
3
Flow - dm /s
n
Regulators
Without Differential Pressure Indicator:
Bowl Guard Kit ...................................................................... PS705P
Filter /
Polycarbonate Bowl – 0 to 150 psig (0 to 10.3 bar)
Bowl Kits – 32°F to 125°F (0°C to 52°C)
Poly Bowl –
Metal Bowl – 0 to 250 psig (0 to 17.2 bar)
Automatic Float Drain ................................................... PS722P
32°F to 175°F (0°C to 80°C)
Lubricators
Twist Drain...................................................................... PS732P
Metal Bowl – With Differential Pressure Indicator: 0 to 150 psig (0 to 10.3 bar)
Automatic Float Drain..................................................... PS726P 32°F to 125°F (0°C to 52°C)
Twist Drain...................................................................... PS734P Automatic Float Drain – 15 to 250 psig (1.0 to 17.2 bar)
Sight Gauge / Automatic Float Drain.............................. PS723P Weight............................................................................1.4 lb. (0.6 kg)
Sight Gauge / Twist Drain............................................... PS735P
Combos
DPI Replacement Kit .............................................................PS781P Materials of Construction
Drain Kits – Body .............................................................................................Zinc
Automatic Float Drain......................................................... PS506P Bowls . ................................................ Transparent Polycarbonate or
Semi-Auto Drain...................................................................PS511P Metal (Zinc) With or Without Sight Gauge
Accessories
Twist Drain.......................................................................... PS512P
Bowl Guards .............................................................................. Steel
Push ‘N’ Drain..................................................................... PS513P
Collar ........................................................................................Plastic
Filter Element Kits –
40 Micron.............................................................................PS701P Deflector, Shroud & Baffle .....................................................Plastic
5 Micron.............................................................................. PS702P Drains –
Adsorber...............................................................................PS731P Twist Drain – Body & Nut......................................................Plastic
Mounting Bracket Kit ............................................................ PS743P Push ‘N’ Drain –
Body.................................................................................... Nitrile
Sight Gauge Kit..................................................................... PS914P
Stem.................................................................................... Brass
Specifications Automatic Float Drain – Housing, Float.................................Plastic
Seals................................................................................... Nitrile
Bowl Capacity ..................................................................4.4 Ounces
Springs, Push Rod............................................... Stainless Steel
Sump Capacity ............................................................... 1.75 Ounces
Filter Elements –
Port Threads ...........................................................1/4, 3/8, 1/2 Inch 40 Micron (Standard) . ..........................................................Plastic
5 Micron (Optional) ...............................................................Plastic
Adsorber (Optional).......................................... Activated Charcoal
Seals........................................................................................... Nitrile
Sight Gauge ...................................................................... Polyamide
C
C
• Large filter element surface guarantees low
pressure drop and increased element life.
• Optional automatic float drain available.
E
Selection
Distance Required
F To Remove All Bowls
Regardless Of
Drain Option
Coalescers
§ SCFM = Standard cubic feet per minute at 90 psig inlet and 5 psig † With Automatic Float Drain
pressure drop.
Combos
Ordering Information
Accessories
07F 3 2 A C — —
Technical Information
6 .4 6
.4
5 5
.3 .3
C
4 4
.2 3 .2 3
2 2
.1 .1
Flow Characteristics 1 Flow Characteristics
1
Selection
07F32A* 07F42A*
Product
1/2 Inch Ports 3/4 Inch Ports
0 0 0 0
0 20 40 60 80 100 120 140 160 180 200 220 0 20 40 60 80 100 120 140 160 180 200 220 240 260
Flow - SCFM Flow - SCFM
Filters
Coalescers
Regulators
07F Filter Kits & Accessories Pressure & Temperature Ratings –
Without Differential Pressure Indicator:
Regulators
Bowl Guard Kit ...................................................................... PS805P
Filter /
Polycarbonate Bowl – 0 to 150 psig (0 to 10.3 bar)
Bowl Kits –
32°F to 125°F (0°C to 52°C)
Poly Bowl –
Automatic Float Drain.................................................... PS822P Metal Bowl – 0 to 250 psig (0 to 17.2 bar)
Twist Drain ..................................................................... PS832P 32°F to 175°F (0°C to 80°C)
Lubricators
Metal Bowl – With Differential Pressure Indicator: 0 to 150 psig (0 to 10.3 bar)
Automatic Float Drain.................................................... PS826P 32°F to 125°F (0°C to 52°C)
Twist Drain ..................................................................... PS834P Automatic Float Drain – 15 to 250 psig (1.0 to 17.2 bar)
Sight Gauge / Automatic Drain...................................... PS823P Weight .......................................................................... 2.2 lb. (1.0 kg)
Sight Gauge / Twist Drain.............................................. PS835P
Materials of Construction
Combos
DPI Replacement Kit ...........................................................PS781P
Drain Kits – Body ..............................................................................................Zinc
Automatic Float Drain........................................................ PS506P Bowls .......................................................Transparent Polycarbonate
Semi-Auto Drain.................................................................. PS511P Metal (Zinc) With or Without Sight Gauge
Accessories
Twist Drain..........................................................................PS512P Bowl Guards .............................................................................. Steel
Push ‘N’ Drain.....................................................................PS513P Collar .......................................................................... Plastic or Metal
Filter Element Kits – Deflector, Shroud & Baffle .....................................................Plastic
40 Micron............................................................................PS801P Drains –
5 Micron............................................................................. PS802P Twist Drain – Body & Nut..................................................... Plastic
Adsorber..............................................................................PS831P Push ‘N’ Drain –
Mounting Bracket Kit ........................................................... PS843P Body................................................................................... Nitrile
Sight Gauge Kit ..................................................................... PS914P Stem................................................................................... Brass
Automatic Float Drain –
Specifications Housing, Float................................................................... Plastic
Bowl Capacity .................................................................. 7.2 Ounces Seals.................................................................................. Nitrile
Sump Capacity .................................................................2.8 Ounces Springs, Push Rod.............................................. Stainless Steel
Port Threads .................................................................. 1/2, 3/4 Inch Filter Elements –
40 Micron (Standard)............................................................ Plastic
5 Micron (Optional)............................................................... Plastic
Adsorber (Optional).......................................... Activated Charcoal
Seals .......................................................................................... Nitrile
Sight Gauge ...................................................................... Polyamide
D
automatic float drain.
• High Flow: 3/4" – 270 SCFM §
s
1" – 300 SCFM §
m
Filters
e
Distance Required
it
F To Remove All
Bowls Regardless
t
of Drain Option
u
Coalescers
e d o t e
e
Port NPT P3NF Filter
ay l
Size Dimensions
o
Twist Drain Automatic Float Drain
Gr e obs
Regulators
ar
Regulators
§ SCFM = Standard cubic feet per minute at 90 psig inlet and 5 psig
Ordering Information
Accessories
P3N f a 9 8 g s m
Note: BSPP ported units supplied using NPT ported bodies and BSPP port block kits.
BOLD ITEMS ARE MOST POPULAR.
Technical Information
Primary Pressure - bar Primary Pressure - bar
2.4 bar 6.2 bar 10.3 bar 2.4 bar 6.2 bar 10.3 bar
Primary Pressure - PSIG Primary Pressure - PSIG
35 PSIG 90 PSIG 150 PSIG 35 PSIG 90 PSIG 150 PSIG
10 10
9 9
.6 .6
8
Pressure Drop - PSIG
.4 6 .4 6
5 5
.3 .3
4 4
.2
.1
3
2
1
Flow Characteristics
P3NF
.2
.1
3
2
1
Flow Characteristics
C
P3NF
3/4 Inch Ports 1 Inch Ports
0 0 0 0
0 50 100 150 200 250 300 350 400 450 500 0 100 200 300 400 500 600
Selection
Product
Flow - SCFM Flow - SCFM
0 25 50 75 100 125 150 175 200 225 0 50 100 150 200 250
3
Flow - dm /s Flow - dm3 /s
n n
m s
Filters
e
Primary Pressure - bar
t
2.4 bar 6.2 bar 10.3 bar
i
Primary Pressure - PSIG
35 PSIG 90 PSIG 150 PSIG
t
10
u
9
Coalescers
o
.6
8
Pressure Drop - PSIG
e
Pressure Drop - bar
d
.5
t
7
ye e
6
l
.4
a o
5
Gr e obs
Regulators
.3
4
.2 3
2
.1 Flow Characteristics
1 P3NF
ar
1-1/2 Inch Ports
Regulators
0 0
0 100 200 300 400 500 600
Filter /
Flow - SCFM
0 50 100 150 200 250
3
Flow - dm /s
n
Lubricators
P3NF Filter Kits & Accessories Specifications
Bowl Kits – Pressure & Temperature Rating –
Metal Bowl – 0 to 250 psig (0 to 17 bar) 32°F to 175°F (0°C to 80°C)
Combos
Sight Gauge / Automatic Float Drain..................... P3NKA00BSA Automatic Float Drain – 15 to 250 psig (1.0 to 17 bar)
Sight Gauge / Twist Drain.....................................P3NKA00BSM Bowl Capacity ................................................................18.0 Ounces
Sight Gauge / Push ‘N’ Drain................................ P3NKA00BSP
Sump Capacity .................................................................6.8 Ounces
Bowl Latch Kit ........................................................................ C11A33
Accessories
Weight –
DPI Replacement Kit .............................................................PS781P 3/4"........................................................................ 3.5 lb. (1.6 kg)
Drain Kit – 1"........................................................................... 3.5 lb. (1.6 kg)
Automatic Float Drain.......................................................... PS506P 1-1/2" # ................................................................. 4.6 lb. (2.1 kg)
Twist Drain.......................................................................... PS512P
Filter Elements –
Materials of Construction
40 Micron................................................................... P3NKA00ESG Body .................................................................................... Aluminum
5 Micron..................................................................... P3NKA00ESE Deflector ...................................................................................Plastic
Adsorber.................................................................... P3NKA00ESA Drain ..........................................................................................Plastic
Mounting Bracket Kit* .................................................P3NKA00MW Filter Elements –
Sight Gauge Kit............................................................. P3NKA00PE 40 Micron (Standard).............................................................Plastic
5 Micron (Optional)................................................................Plastic
Adsorber (Optional)...........................................Activated Charcoal
Seals .......................................................................................... Nitrile
Sight Gauge ......................................................... Polyamide (Nylon)
# 1" Port Body with 1-1/2" Port Block.
* If 1-1/2 BSPP E02 fittings are required, use P3NKA0BMW.
Features
Manual Automatic
Drain Drain
• Excellent water removal efficiency
• For heavy duty applications with F
minimum pressure drop requirement.
OUT
IN
• Unique deflector plate that creates
E
increased element life.
• 40 micron filter element standard,
5 micron available.
Filters
Filter Dimensions
3/4" F602-06EJ F602-06EJR A B C D E F
1" F602-08EJ F602-08EJR 4.90 11.10 11.94 4.06 0.84 2.45
(124) (282) (303) (103) (21) (62)
Standard part numbers shown bold.
inches (mm)
For other models refer to ordering information below.
Combos
§ SCFM = Standard cubic feet per minute at 90 psig inlet and 5 psig
pressure drop.
Accessories
Ordering Information
F 602 — 06 W J — /**
Port Threads Port Size Bowl Element Drains and Options Engineering
— NPT 06 3/4 Inch E 32 oz. Large G 5 Micron Blank Manual Twist Drain Level
G BSPP 08 1 Inch Capacity Metal J 40 Micron Q External Heavy * Will be
without Sight Duty Auto Drain Entered
Gauge R Internal Auto Drain at Factory.
W 16 oz. Metal with U Semi-Auto Drain
Sight Gauge
Technical Information
.2 3
.2 3
C
2 2
.1
.1
Selection
Flow Characteristics Flow Characteristics
Product
1
1 F602-06WJ F602-08WJ
3/4-inch Port 1-inch Port
0 0 0
0 0 50 100 150 200 250 300 350
0 50 100 150 200 250 300
Flow - SCFM Flow - SCFM
Filters
0 20 40 60 80 100 120 140 0 20 40 60 80 100 120 140 160
3 3
Flow - dm /s Flow - dm /s
n n
Coalescers
“Q” Option External Heavy Duty Auto Drain Float
(Inside Bowl)
SA602D / SA603D
For heavy duty applications where the filter is Connection
being used to remove large volumes of liquid Through
Regulators
Bowl
and/or particulate matter from the airstream, (1/8" NPSM)
Regulators
F602 Filter Kits & Accessories
Filter /
Pressure & Temperature Ratings –
Aluminum Bowl (E) 32 oz. – 0 to 300 psig (0 to 20.4 bar)
Bowl Kits – 40°F to 150°F (4.4°C to 65.6°C)
Aluminum (E) 32 oz............................................................. BK603B
Zinc with Sight Gauge (W) 16 oz. .................................... BK605WB Zinc (W) 16 oz. – 0 to 250 psig (0 to 17.2 bar)
Lubricators
40°F to 150°F (4.4°C to 65.6°C)
Drain Kits –
External Auto (E) 32 oz. ..................................................... SA603D With Internal Auto Drain (R) – 20 to 175 psig (1.4 to 11.9 bar)
External Auto (W) 16 oz. .................................................... SA602D 40°F to 125°F (4.4°C to 52°C)
Internal Auto (All) . ........................................................... SA602MD With External Auto Drain (Q) – 0 to 250 psig (0 to 17.2 bar)
Manual (All) ................................................................... SA600Y7-1 40°F to 150°F (4.4°C to 65.6°C)
Combos
Semi-Automatic “Overnight” Drain..................................... SA602A7
Weight –
(Drains automatically under zero pressure)
Aluminum Bowl (E) 32 oz. ................................ 7 lb. (3.18 kg) / Unit
Filter Element Kits – 28 lb. (12.70 kg) / 4-Unit Master Pack
40 Micron (All) .................................................................... EK602B
Zinc Bowl (W) 16 oz. ..................................... 6.3 lb. (2.86 kg) / Unit
Accessories
5 Micron (All) .................................................................... EK602VB
25 lb. (11.34 kg) / 4-Unit Master Pack
Mounting Bracket Kit
(Pair or 2 Kits Pipe Mounted Brackets needed) – Materials of Construction
(3/4" Unit) .................................................................... SA200AW57
(1" Unit) .......................................................................SA200CW57 Body .............................................................................................. Zinc
Features
Manual Automatic
Drain Drain
• Excellent water removal efficiency
• For heavy duty applications with
minimum pressure drop requirement.
F
• Unique deflector plate that creates
OUT
A
IN
maximum water and dirt separation.
• Large filter element surface
guarantees low pressure drop and
Selection
D
Product
§ SCFM = Standard cubic feet per minute at 90 psig inlet and 5 psig
pressure drop.
Accessories
Ordering Information
F 602 — 10 W J — /**
Port Threads Port Size Bowl Element Drains and Options Engineering
— NPT 10 1-1/4 Inch E 32 oz. Large G 5 Micron Blank Manual Twist Drain Level
G BSPP 12 1-1/2 Inch Capacity Metal J 40 Micron Q External Heavy * Will be
without Sight Duty Auto Drain Entered
Gauge R Internal Auto Drain at Factory.
W 16 oz. Metal with U Semi-Auto Drain
Sight Gauge
Technical Information
.3
.3
Pressure Drop - PSIG
4 4
Selection
Product
.1 .1
1 1
Flow Characteristics Flow Characteristics
F602-10WJ F602-12WJ
1-1/4-inch Port 1-1/2-inch Port
0 0 0 0
0 50 100 150 200 250 300 350 400 450 500 0 50 100 150 200 250 300 350 400 450 500 550 600
Flow - SCFM
Flow - SCFM
Filters
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280
0 20 40 60 80 100 120 140 160 180 200 220 Flow - dmn3/s
Flow - dmn3/s
Coalescers
Float
“Q” Option External Heavy Duty Auto Drain (Inside Bowl)
SA602D / SA603D
For heavy duty applications where the filter is Connection
Through
being used to remove large volumes of liquid Bowl
Regulators
(1/8" NPSM)
and/or particulate matter from the airstream,
the external automatic drain (“Q” option) Drain Manual
(1/4" NPTF) Push Button
should be used. Drain
(Outside Bowl)
Regulators
Filter /
F602 Filter Kits & Accessories Pressure & Temperature Ratings –
Aluminum Bowl (E) 32 oz. – 0 to 300 psig (0 to 20.4 bar)
Bowl Kits – 40°F to 150°F (4.4°C to 65.6°C)
Aluminum (E) 32 oz. ............................................................BK603B
Zinc with Sight Gauge (W) 16 oz. .................................... BK605WB Zinc (W) 16 oz. – 0 to 250 psig (0 to 17.2 bar)
Lubricators
40°F to 150°F (4.4°C to 65.6°C)
Drain Kits –
External Auto (E) 32 oz. ..................................................... SA603D With Internal Auto Drain (R) – 20 to 175 psig (1.4 to 11.9 bar)
External Auto (W) 16 oz. .................................................... SA602D 40°F to 125°F (4.4°C to 52°C)
Internal Auto (All) . ........................................................... SA602MD With External Auto Drain (Q) – 0 to 250 psig (0 to 17.2 bar)
Manual (All) ................................................................... SA600Y7-1 40°F to 150°F (4.4°C to 65.6°C)
Combos
Semi-Automatic “Overnight” Drain......................................SA602A7 Weight –
(Drains automatically under zero pressure) Aluminum Bowl (E) 32 oz. ............................. 7.7 lb. (3.49 kg) / Unit
Filter Element Kits – 31 lb. (14.06 kg) / 4-Unit Master Pack
40 Micron (All) .....................................................................EK602B
Accessories
Zinc Bowl (W) 16 oz. ........................................ 7 lb. (3.18 kg) / Unit
5 Micron (All) .................................................................... EK602VB 28 lb. (12.70 kg) / 4-Unit Master Pack
Repair Kits –
Deflector, Baffle Assembly, and Retaining Rod (All) . ......... RK602C Materials of Construction
External Auto Drain (All) ..................................................... RK602D
Internal Auto Drain (All) ................................................... RK602MD Body .............................................................................................. Zinc
Metal Bowl with Sight Gauge (W) 16 oz. .......................RKB605WB Bowls –
(E) 32 oz.......................................... Aluminum without Sight Gauge
Specifications (W) 16 oz........................................................Zinc with Sight Gauge
Drain –
Bowl Capacity – Manual Twist & Overnight ........................................................Brass
Aluminum (E) 32 oz. ....................................................... 32 Ounces Housing “R”..............................................................................Acetal
Zinc (W) 16 oz................................................................. 16 Ounces Housing “Q”........................................................................... Bronze
Port Threads . ............................................................1-1/4, 1-1/2 Inch Filter Elements –
40 Micron (Standard) . ............................................... Polypropylene
5 Micron (Optional) .................................................... Polypropylene
Seals ............................................................................................Nitrile
( ) = Bowl Type Sight Gauge ................................................................................Nylon
C
D
swirling of the air stream ensuring
maximum water and dirt separation. E
• Large filter element surface
guarantees low pressure drop and
Selection
Product
§ SCFM = Standard cubic feet per minute at 90 psig inlet and 5 psig
pressure drop.
Accessories
Ordering Information
F 602 — 16 W J — /**
Port Threads Port Size Bowl Element Drains and Options Engineering
— NPT 16 2 Inch E 32 oz. Large J 40 Micron Blank Manual Twist Drain Level
G BSPP 20 2-1/2 Inch Capacity Metal Q External Heavy * Will be
without Sight Duty Auto Drain Entered
Gauge R Internal Auto Drain at Factory.
W 16 oz. Metal with U Semi-Auto Drain
Sight Gauge
Technical Information
.3
Selection
Product
.1
1 Flow Characteristics
F602-16/20
2-inch Port
0 0
0 250 500 750 1000 1250
Flow - SCFM
Filters
0 120 240 360 480
Flow - dmn3/s
Coalescers
Float
“Q” Option External Heavy Duty Auto Drain (Inside Bowl)
SA602D / SA603D
For heavy duty applications where the filter is Connection
Through
being used to remove large volumes of liquid Bowl
Regulators
(1/8" NPSM)
and/or particulate matter from the airstream,
the external automatic drain (“Q” option) Drain Manual
(1/4" NPTF) Push Button
should be used. Drain
(Outside Bowl)
Regulators
Filter /
F602 Filter Kits & Accessories Pressure & Temperature Ratings –
Aluminum Bowl (E) 32 oz. – 0 to 300 psig (0 to 20.4 bar)
Bowl Kits – 40°F to 150°F (4.4°C to 65.6°C)
Lubricators
Aluminum (E) 32 oz. ............................................................BK603B
Zinc with Sight Gauge (W) 16 oz. .................................... BK605WB Zinc (W) 16 oz. – 0 to 250 psig (0 to 17.2 bar)
40°F to 150°F (4.4°C to 65.6°C)
Drain Kits –
External Auto (E) 32 oz........................................................ SA603D With Internal Auto Drain (R) – 20 to 175 psig (1.4 to 11.9 bar)
External Auto (W) 16 oz. .................................................... SA602D 40°F to 125°F (4.4°C to 52°C)
Internal Auto (All) . ........................................................... SA602MD With External Auto Drain (Q) – 0 to 250 psig (0 to 17.2 bar)
Combos
Manual (All) ................................................................... SA600Y7-1 40°F to 150°F (4.4°C to 65.6°C)
Semi-Automatic “Overnight” Drain......................................SA602A7 Weight –
(Drains automatically under zero pressure) Aluminum Bowl (E) 32 oz. ........................... 10.3 lb. (4.67 kg) / Unit
Filter Element Kits – 11 lb. (4.99 kg) / 1-Unit Master Pack
Accessories
40 Micron (All) .................................................................... EK602G Zinc Bowl (W) 16 oz. ..................................... 9.8 lb. (4.45 kg) / Unit
Repair Kits – 39 lb. (17.69 kg) / 4-Unit Master Pack
Deflector, Baffle Assembly, and Retaining Rod (All) . ......... RK602C
External Auto Drain (All) ..................................................... RK602D Materials of Construction
Internal Auto Drain (All) ................................................... RK602MD
Metal Bowl with Sight Gauge (W) 16 oz. .......................RKB605WB Body .....................................................................................Aluminum
Bowls –
Specifications (E) 32 oz.......................................... Aluminum without Sight Gauge
Bowl Capacity – (W) 16 oz........................................................Zinc with Sight Gauge
Aluminum (E) 32 oz. ....................................................... 32 Ounces Drain –
Zinc (W) 16 oz.................................................................. 16 Ounces Manual Twist & Overnight ........................................................Brass
Housing “R”..............................................................................Acetal
Port Threads . ..................................................................2, 2-1/2 Inch Housing “Q”........................................................................... Bronze
Filter Elements –
40 Micron (Standard) . ............................................... Polypropylene
Seals .........................................................................................Buna N
( ) = Bowl Type Sight Gauge ................................................................................Nylon
C
eliminate the guesswork of element
replacement
• Differential pressure gauge available,
order separately, Kit DP3-01-000
Selection
Product
* Without
Differential Pressure Indicator – G
Max. supply pressure is 250 PSIG (20.7 bar).
Regulators
2 5 micron 35F87BAP
Filter /
§ SCFM = Standard cubic feet per minute at 90 psig inlet and 5 psig
Ordering Information
Accessories
35F 7 7 B A P
Technical Information
35F77BAP 35F87BAP
PSID
PSID
Inlet Pressure
bar
bar
Inlet Pressure
PSIG 15 35 60 90 100 120 150 PSIG 15 35 60 90 100 120 150
bar 1.0 2.4 4.1 6.2 7.0 8.2 10.3 bar 1.0 2.4 4.1 6.2 7.0 8.2 10.3
5 5
0.3 0.3
4 4
PRESSURE DROP
PRESSURE DROP
3 3
0.2 0.2
2 2 C
0.1 0.1
1 1
Selection
Product
0 0 0 0
0 200 400 600 800 1000 1200 SCFM 0 200 400 600 800 1000 1200 1400 SCFM
3 3
0 100 200 300 400 500 dm /s 0 100 200 300 400 500 600 dm /s
AIR FLOW RATE
Filters
AIR FLOW RATE
43FN7BAP
PSID
bar
Inlet Pressure
PSIG 15 35 60 90 100 120 150
bar 1.0 2.4 4.1 6.2 7.0 8.2 10.3
Coalescers
5
0.3
4
PRESSURE DROP
Regulators
3
0.2
0.1
Regulators
1
Filter /
0 0
0 500 1000 1500 2000 2500 SCFM
Lubricators
3
0 200 400 600 800 1000 1200 dm /s
AIR FLOW RATE
Combos
43F......................................................................................... 3 Inch
For pressures over 150 PSIG.......................... GRP-95-022 Standard Filtration............................................................... 5 Micron
Differential Pressure Gauge................................. DP3-01-000 Weight –
Differential Pressure Indicator............................. DP2-02-001 35F............................................................................19.3 lb. (8.7 kg
Accessories
43F........................................................................ 32.8 lb. (14.9 kg)
Drain, Automatic, Internal, Fluorocarbon,
* Without pressure indicator
1/8 NPT............................................................GRP-95-981
Drain Plate Kit – Materials of Construction
1/2 NPT Tapped Drain Port............................. GRP-95-393 Baffle................................................................................Plated Steel
Element Body.................................................................................... Aluminum
35F, 5 Micron.................................................... FRP-95-505 Bowls................................................................................... Aluminum
43F, 5 Micron.................................................... FRP-95-508
Deflector..........................................................................Plated Steel
Manual Drain Kit Element Retainer............................................................Plated Steel
with 1/2" Drain Plate........................................ GRP-95-392
Filter Element................................................................ Polyethylene
Specifications Seals...............................................................................Fluorocarbon
Maximum Supply without DPI and with Stud..................................................................................Plated Steel
Pressure Pressure Gauge........... 250 PSIG (17.2 bar)*
with DPI......................... 150 PSIG (10.3 bar)
Operating Temperature..........................32° to 150°F (0° to 65.5°C)
500 3,500
500
20
Filter Selection
Regulators
Filter /
Media Specifications
500
32FN
SYSTEM OPERATING PRESSURE – PSIG
3,500 32F9
2,500
31F8L
G
SYSTEM FLOW RATE – SCFM
50
1 Testedper BCAS 860900 at 40 ppm inlet. 50 40
30
2 Add 12F
dry + wet for total pressure drop. 25
20
D.O.P. = Dioctylphthalate 30 15
10 11F
Element Selection 20
15F
Element 10F
Applications
Grade
General air coalescing applications when total removal
6 of liquid aerosols and suspended fines is required
(.01 in all pressure ranges. Protection of air dryers, air
Micron) gauging, air logic, modulating systems, critical air
conveying, most breathing air systems, etc.
Precoalescer or prefilter for Grade 6 to remove gross
10 amounts of water and oil, or tenacious aerosols which
(.7 are difficult to remove. Upgrading existing particulate
Micron) equipment to coalescing without increase in pressure
drop.
Coalescing Filters
(Oil Removal)
Specifically designed for the removal of solid particles, a gravitational passage to the filter sump (B) where
water and oil aerosols down to 0.01 micron. Maximum they can be manually or automatically drained. The
remaining oil content of air leaving the filter down to clean, filtered air now passes through the outer screen
0.01ppm at 70°F (21°C) at a pressure of 100 psig plastic net and out into the pneumatic system. The Air
(6.9 bar) using a typical compressor lubricant. Two Line Coalescing Filter removes liquid aerosols and
filter element grades are offered to better meet your air sub-micron particulate matter. Collected liquids and
quality requirements. particles in the “quiet zone” should be drained before
Grade 10 filter elements are used for most air their level reaches a height where they would be
reentrained in the flowing air. This can be
C
coalescing applications where the removal of liquid
aerosols and submicronic particles for general air accomplished by the manual drain (C) which is
Selection
actuated by twisting knob (D) counterclockwise. On
Product
quality is required. Protection of components such as
air valves, cylinders, as well as air conveyors, air the 30 Series, unscrew the drain valve (E) slightly until
gaging, air bearings, air control circuits and paint the liquid begins to drain.
spraying equipment are examples of specific end-use
Filters
applications. This grade of filter element should be
used as a prefilter for the Grade C coalescing filter.
Grade 6 high-efficiency filter elements are used where
the removal of extremely fine particulate and virtually
Coalescers
“oil-free” or high quality air is necessary. Specific end-
use applications are protection of critical air control
circuits, air logic systems, flow and temperature A
controllers, food processing, electronics, health care
Regulators
and film processing.
The contaminated air enters the element interior and is
forced through a thick membrane of borosilicate glass B
Regulators
fibers coated with epoxy (A). Flow then passes
Filter /
through an outer structural support and, at this stage,
has removed up to 99.97% + of the sub-micron
particles evident in the contaminated air. These tiny
C
Lubricators
droplets coalesce together and are blotted from the D
filter surface by the drain and release layers of non-
woven glass felt and rayon cloth. The drops now begin
Combos
Semi Automatic Drain Automatic Pulse Drain Automatic Float Drain
Accessories
(Overnight Drain) (Spitter Drain) The float internal to this drain rises with
This drain offers a semi-automatic The diaphragm in this drain pulses increased liquid level. When the float
function when there is a differential when there is a pressure differential rises, it opens a seat area allowing the
pressure in the filter which occurs such as a valve cycling or cylinder trapped liquids to drain through the
when system pressure is shut off. The stroking downstream. This action bottom.
drain can also be used manually by flexes the diaphragm and allows the A manual override can be pushed in
gripping it with your fingertips and filter to drain the entrapped water. the bottom of the drain to unseat the
pushing upward. float if particulates create a block.
C
Selection
Product
Coalescing Filters
Filters
around the filter fibers and eventually Oil Aerosol Fly Ash
collides with and adheres to one of the Tobacco Smoke Coat Dust
Metallurgical Dusts and Fumes
fibers. Typically affecting particles in the Ammonium Chloride Cement Dust
0.3 micron -1 micron size range. Fume Sulfuric Beach Sand
Concentrator Mist
Pulverized Coal
Zinc Oxide Fume Insecticide Dusts
Ground Talc
Colloidal Spray Dried Milk Plant
Diffusion or Brownian Movement, as it is Silica Spores
Alkali Fume Pollens
sometimes called, occurs with extremely
small particles which tend to wander
within the gas stream, increasing their 0.01 0.1 1 10 100
chances of colliding with and adhering to
a fiber. This usually affects particles To assist in understanding the aerosol in a similar size band 0.01 -1.2
parameters of filtration, refer to this micron. Observe the smoke test
below 0.3 micron in size. A degree of
pollution size comparison chart. Look yourself, appreciate the size of the
overlap takes place with the at the size of a major contaminant, oil problem! The smallest particle the
mechanisms, the extent varying on the aerosol! It is in the region of 0.01 - 0.8 human eye can see is in the order of 40
conditions. micron. Tobacco smoke is also a liquid microns.
Features
• Clear nylon housing.
A
• Full length support tube.
• Positive tube seals.
• Optional filter grades available.
• Disposable. C
• High Flow: Grade 6 – 3.5 SCFM §
Grade 10 – 5.3 SCFM § C B
Selection
Product
Application
The 02F Miniature Inline Filter is designed to
remove 99.9%+ of the aerosols and sub-micron
Filters
particles from your air system.
Coalescers
Filter Dimensions
02FA06A Grade 6
1/4" A B C
02FA10A Grade 10
1.00 3.28 1.69
I.D.
02FA22A Grade 6 (oil activated dye) (25) (83) (43)
Regulators
§ Inches (mm)
SCFM @ 1 PSID Operating Pressure 100 psig.
Regulators
Filter /
Operation
The contaminated air enters the filters interior and is
➚
forced through the elements membrane of Borosilicate
Lubricators
glass fibers. Contaminants and aerosols are collected
and distributed evenly along the entire tubes length.
This is accomplished by the use of the “center post”
➚
➚
which not only provides this “drop out pocket”, but
Combos
also provides a stable support.
➚
Accessories
Materials of Construction
Port Size Elements Engineering
Level Element ............................................. Borosilicate & Felt Glass Fibers
A Standard 06 Grade 6
Housing ...................................................................................... Nylon
10 Grade 10 A Current
22 Grade 6
oil activated dye
E
• Grade 6 element, D
99.97% DOP efficiency.
• High Flow: Grade 6 Element
1/8" – 17 SCFM §
Filters
Accepts Distance Required
1/4" – 20 SCFM § 1/8" Tubing F To Remove All Bowls
Regardless Of
Grade 10 Element Drain Option
1/8" – 19 SCFM §
Coalescers
1/4" – 24 SCFM §
D D† E
Filter /
Standard part numbers shown bold, with Grade 6 Elements (for (103) (41)
Grade 10 Elements, replace “E” with “H” in the 6th position). For
Inches (mm)
other models refer to ordering information below.
‡ For polycarbonate bowl see Caution on page C2. † With Automatic Pulse Drain.
§ SCFM = Standard cubic feet per minute at 90 psig inlet and 5 psig
Combos
pressure drop.
Ordering Information
Accessories
10F 1 1 E D —
Technical Information
Primary Pressure - bar
Grade 6 Primary Pressure - bar
2.4 bar 6.2 bar 10.3 bar 2.4 bar 6.2 bar 10.3 bar
Primary Pressure - PSIG Primary Pressure - PSIG
35 PSIG 90 PSIG 150 PSIG 35 PSIG 90 PSIG 150 PSIG
10 10
9 9
.6 .6
8
Pressure Drop - PSIG
.4 6 .4 6
5 5
.3 .3
4 4
C
.2 3 .2 3
2 2
.1 Flow Characteristics .1 Flow Characteristics
1 10F01E* 1 10F01E*
1/8 Inch Ports 1/8 Inch Ports
0 0 0 0
0 5 10 15 20 25 30 35 40 45 0 5 10 15 20 25 30 35 40 45
Flow - SCFM Flow - SCFM
Selection
Product
0 5 10 15 20 0 5 10 15 20
3 3
Flow - dm /s Flow - dm /s
n n
Filters
2.4 bar 6.2 bar 10.3 bar
Primary Pressure - PSIG Primary Pressure - PSIG
35 PSIG 90 PSIG 150 PSIG 35 PSIG 90 PSIG 150 PSIG
10 10
9 9
.6 .6
8
Coalescers
Pressure Drop - bar
.5 .5
7 7
6 .4 6
.4
5 5
.3 .3
4 4
3 .2 3
Regulators
.2
2 2
.1 Flow Characteristics .1 Flow Characteristics
1 10F01H* 1 10F11H*
1/8 Inch Ports 1/4 Inch Ports
0 0 0 0
0 5 10 15 20 25 30 35 40 45 0 5 10 15 20 25 30 35 40 45 50
Flow - SCFM Flow - SCFM
Regulators
0 5 10 15 20 0 5 10 15 20
3
Filter /
3
Flow - dm /s Flow - dm /s
n n
Lubricators
Bowl Kits – Body ............................................................................................. Zinc
Poly Bowl – Automatic Pulse Drain................................ PS408BP Bowls ...................................................... Transparent Polycarbonate
Twist Drain.....................................................PS404P Metal (Zinc) Without Sight Gauge
Metal Bowl – Automatic Pulse Drain.................................PS451BP Drains – Twist Drain –
Twist Drain .................................................PS447BP Body & Stem.......................................................... Plastic
Combos
Filter Element Kits – Grade 6 (Standard).............................PS446P Seals........................................................................Nitrile
Grade 10 (Optional) ...........................................................PS456P Automatic Pulse Drain –
Mounting Bracket Kit ......................................................... PS417BP Piston & Seals..........................................................Nitrile
Stem, Seat, Adaptor & Washers....................... Aluminum
Accessories
Element Holder ....................................................................... Plastic
Specifications Filter Element –
Automatic Pulse Drain Tube Barb....................................... 1/8 Inch Borosilicate & felt glass fibers 99.97% DOP efficiency
Bowl Capacity ..................................................................... 1 Ounce Largest Aerosol Particle Passed (Grade 6)................. 0.01 Micron
Operation – Largest Solid Particle Passed (Grade 6)...................... 0.30 Micron
Normal Operating Pressure Drop ..........................................2 psig Seals ..........................................................................................Nitrile
Maximum Recommended Pressure Drop ........................... 10 psig
(Element should be replaced)
Port Threads ................................................................. 1/8, 1/4 Inch
Pressure & Temperature Ratings –
Polycarbonate Bowl............................. 0 to 150 psig (0 to 10.3 bar)
32°F to 125°F (0°C to 52°C)
Metal Bowl............................................ 0 to 250 psig (0 to 17.2 bar)
32°F to 175°F (0°C to 80°C)
Automatic Pulse Drain.....................10 to 250 psig (0.7 to 17.2 bar)
at 125°F (52°C) or less
Weight ..................................................................... 0.41 lb. (0.18 kg)
C
C1 G
air gauging and pneumatic instrumentation Electronic
C
DPI Electronic DPI
and controls.
• Interchangeable twist and automatic pulse drains.
Selection
E
D
• High Flow: Grade 6 Element Grade 10 Element
1/4" – 30 SCFM § 1/4" – 51 SCFM §
s
3/8" – 30 SCFM § 3/8" – 66 SCFM §
m
Filters
it e
Distance Required
F To Remove All Bowls
t
Regardless Of
u
Drain Option
Coalescers
d o e
Automatic
t
Port NPT 15F Coalescing
e
Pulse Drain
y e
Size Filter Dimensions
l
Twist Drain Automatic Pulse Drain
a o
A B C
Gr e obs
Poly Bowl‡ / Metal Guard
Regulators
ar
Metal Bowl / Sight Gauge 1.86 5.35 6.85
1/8" Tubing
Regulators
(for Grade 10 Elements, replace “E” with “H” in the 6th position). Inches (mm)
For other models refer to ordering information below. † With Twist Drain or
‡ For polycarbonate bowl see Caution on page C2. Automatic Float Drain
§ SCFM = Standard cubic feet per minute at 90 psig inlet and 5 psig
pressure drop.
Combos
Ordering Information
Accessories
15F 1 2 E A — —
Technical Information
Primary Pressure - bar Grade 6 Primary Pressure - bar
2.4 bar 6.2 bar 10.3 bar 2.4 bar 6.2 bar 10.3 bar
Primary Pressure - PSIG Primary Pressure - PSIG
35 PSIG 90 PSIG 150 PSIG 35 PSIG 90 PSIG 150 PSIG
10 10
9 9
.6 .6
8 8
.5 .5
7 7
.4 6 .4 6
5 5
.3 .3
4 4
.2
.1
3
2
1
Flow Characteristics
15F12E*
.2
.1
3
2
1
Flow Characteristics
15F22E*
C
1/4 Inch Ports 3/8 Inch Ports
0 0 0 0
0 10 20 30 40 50 60 70 80 0 10 20 30 40 50 60 70 80
Flow - SCFM Flow - SCFM
Selection
Product
0 5 10 15 20 25 30 35 0 5 10 15 20 25 30 35
3 3
Flow - dm /s Flow - dm /s
n n
Grade 10
s
Primary Pressure - bar Primary Pressure - bar
m
2.4 bar 6.2 bar 10.3 bar 2.4 bar 6.2 bar 10.3 bar
Filters
e
Primary Pressure - PSIG Primary Pressure - PSIG
t
35 PSIG 90 PSIG 150 PSIG 35 PSIG 90 PSIG 150 PSIG
i
10 10
t
9 9
.6 .6
u
8 8
Pressure Drop - PSIG
Coalescers
o
.5 .5
7 7
d e
.4 6 .4 6
e et
5 5
y l
.3 .3
4 4
a
Gr e obs o
.2 3 .2 3
Regulators
2 2
.1 Flow Characteristics .1 Flow Characteristics
1 15F12H* 1 15F22H*
1/4 Inch Ports 3/8 Inch Ports
0 0 0 0
0 10 20 30 40 50 60 70 80 90 0 20 40 60 80 100 120 140
Flow - SCFM Flow - SCFM
ar
Regulators
0 5 10 15 20 25 30 35 40 0 10 20 30 40 50 60
Filter /
3 3
Flow - dm /s Flow - dm /s
n n
Lubricators
15F Coalescing Filter Kits & Accessories Pressure & Temperature Ratings –
Without Differential Pressure Indicator:
Bowl Guard Kit ......................................................................PS905P
Polycarbonate Bowl – 0 to 150 psig (0 to 10.3 bar)
Bowl Kits –
32°F to 125°F (0°C to 52°C)
Poly Bowl – Automatic Pulse Drain..................................PS995P
Twist Drain....................................................PS932P Metal Bowl – 0 to 250 psig (0 to 17.2 bar)
Combos
32°F to 175°F (0°C to 80°C)
Metal Bowl – Automatic Pulse Drain.................................. PS997P
Twist Drain....................................................PS934P With Differential Pressure Indicator: 0 to 150 psig (0 to 10.3 bar)
Sight Gauge / Automatic Pulse Drain..........PS996P 32°F to 125°F (0°C to 52°C)
Sight Gauge / Twist Drain.............................PS935P Weight ........................................................................ 1.2 lb. (0.54 kg)
Accessories
DPI Replacement Kit ............................................................ PS781P
Electronic DPI Replacement Kit ........................................... PS764 Materials of Construction
Drain Kit – Automatic Pulse Drain...................................PS998P Body ..............................................................................................Zinc
Semi-Auto Drain.............................................PS511P
Bowls ........................................................Transparent Polycarbonate
Twist Drain..................................................... PS512P
Metal (Zinc) Without Sight Gauge
Push ‘N’ Drain................................................ PS513P
Bowl Guards .............................................................................. Steel
Electrical Connector - 15mm, 3-Pin DIN, 6 Ft. Cord.....PS2932JBP
Collar .........................................................................................Plastic
Filter Element Kits – Grade 6 (Standard)............................ PS924P
Grade 10 (Optional)...........................PS930P Drain ..........................................................................................Plastic
Filter Element –
Mounting Bracket Kit ...........................................................PS943P
Borosilicate & felt glass fibers 99.97% DOP efficiency
Sight Gauge Kit..................................................................... PS914P
Largest Aerosol Particle Passed (Grade 6)..................0.01 Micron
Specifications Largest Solid Particle Passed (Grade 6).......................0.30 Micron
Bowl Capacity ..................................................................2.0 Ounces Seals .......................................................................................... Nitrile
Sump Capacity ................................................................. 0.9 Ounce Sight Gauge, DPI ..................................................Polyamide (Nylon)
Port Threads ..................................................................1/4, 3/8 Inch
Features A
C
Electronic
C Electronic DPI
air gauging and pneumatic instrumentation DPI
and controls.
• Interchangeable twist and automatic float drains.
E
Selection
D
• Shown with recommended metal bowl guard.
• High Flow: Grade 6 Element Grade 10 Element
1/4" – 45 SCFM § 1/4" – 60 SCFM § Distance Required
Filters
pressure drop.
Ordering Information
Accessories
11F 1 2 E C — —
Technical Information
Grade 6
Primary Pressure - bar Primary Pressure - bar Primary Pressure - bar
2.4 bar 6.2 bar 10.3 bar 2.4 bar 6.2 bar 10.3 bar 2.4 bar 6.2 bar 10.3 bar
Primary Pressure - PSIG Primary Pressure - PSIG Primary Pressure - PSIG
35 PSIG 90 PSIG 150 PSIG 35 PSIG 90 PSIG 150 PSIG 35 PSIG 90 PSIG 150 PSIG
10 10 10
9 9 9
.6 .6 .6
8
.4 6 .4 6 .4 6
5 5 5
.3 .3 .3
4 4 4
.2 3 .2 3 .2 3
C
2 2 2
.1 Flow Characteristics .1 Flow Characteristics .1 Flow Characteristics
1 11F11E* 1 11F21E* 1 11F31E*
1/4 Inch Ports 3/8 Inch Ports 1/2 Inch Ports
0 0 0 0 0 0
0 20 40 60 80 100 120 0 20 40 60 80 100 120 140 0 20 40 60 80 100 120 140 160
Flow - SCFM Flow - SCFM Flow - SCFM
0 10 20 30 40 50 0 10 20 30 40 50 60 0 10 20 30 40 50 60 70
3 3 3
Flow - dm /s Flow - dm /s Flow - dm /s
Selection
n n n
Product
Grade 10
Primary Pressure - bar Primary Pressure - bar Primary Pressure - bar
2.4 bar 6.2 bar 10.3 bar 2.4 bar 6.2 bar 10.3 bar 2.4 bar 6.2 bar 10.3 bar
Filters
Primary Pressure - PSIG Primary Pressure - PSIG Primary Pressure - PSIG
35 PSIG 90 PSIG 150 PSIG 35 PSIG 90 PSIG 150 PSIG 35 PSIG 90 PSIG 150 PSIG
10 10 10
9 9 9
.6 .6 .6
8
8
Pressure Drop - PSIG
.5 .5 .5
7 7 7
Coalescers
.4 6 .4 6 .4 6
5 5 5
.3 .3 .3
4 4 4
.2 3 .2 3 .2 3
2 2 2
.1 Flow Characteristics .1 Flow Characteristics .1 Flow Characteristics
1 11F11H* 1 11F21H* 1 11F31H*
Regulators
1/4 Inch Ports 3/8 Inch Ports 1/2 Inch Ports
0 0 0 0 0 0
0 20 40 60 80 100 120 0 20 40 60 80 100 120 140 0 20 40 60 80 100 120 140 160
Flow - SCFM Flow - SCFM Flow - SCFM
0 10 20 30 40 50 0 10 20 30 40 50 60 0 10 20 30 40 50 60 70
3 3 3
Flow - dm /s Flow - dm /s Flow - dm /s
n n n
Regulators
Filter /
11F Coalescing Filter Kits & Accessories Pressure & Temperature Ratings –
Without Differential Pressure Indicator:
Bowl Guard Kit ...................................................................... PS705P
Polycarbonate Bowl – 0 to 150 psig (0 to 10.3 bar)
Bowl Kits – 32°F to 125°F (0°C to 52°C)
Lubricators
Poly Bowl – Automatic Float Drain................................... PS722P
Metal Bowl – 0 to 250 psig (0 to 17.2 bar)
Twist Drain.................................................... PS732P
32°F to 175°F (0°C to 80°C)
Metal Bowl – Automatic Float Drain................................... PS726P
Twist Drain.................................................... PS734P With Differential Pressure Indicator – 0 to 150 psig (0 to 10.3 bar)
Sight Gauge / Automatic Float Drain........... PS723P 32°F to 125°F (0°C to 52°C)
Sight Gauge / Twist Drain............................. PS735P Automatic Float Drain – 15 to 250 psig (1.0 to 17.2 bar)
Combos
DPI Replacement Kit ............................................................ PS781P Weight........................................................................... 1.5 lb (0.7 kg)
Electronic DPI Replacement Kit ........................................... PS764
Drain Kits – Automatic Float Drain.....................................PS506P
Materials of Construction
Body............................................................................................. Zinc
Accessories
Semi-Auto Drain..............................................PS511P
Twist Drain...................................................... PS512P Bowls ...................................................... Transparent Polycarbonate
Push ‘N’ Drain................................................. PS513P Metal (Zinc) With or Without Sight Gauge
Electrical Connector - 15mm, 3-Pin DIN, 6 Ft. Cord.....PS2932JBP Bowl Guard ................................................................................. Steel
Filter Element Kits – Grade 6 (Standard)............................ PS724P Collar ........................................................................................ Plastic
Grade 10 (Optional)........................... PS730P Drains – Twist Drain – Body & Nut......................................... Plastic
Mounting Bracket Kit ........................................................... PS743P Push ‘N’ Drain – Body.................................................Nitrile
Sight Gauge Kit ..................................................................... PS914P Stem.................................................Brass
Automatic Float Drain –.....................Housing, Float Plastic
Specifications Seals................................................Nitrile
Bowl Capacity ..................................................................4.4 Ounces Springs, Push Rod............ Stainless Steel
Sump Capacity ...............................................................1.75 Ounces Filter Element –
Operation – Normal Operating Pressure Drop........................2 psig Borosilicate & felt glass fibers 99.97% DOP efficiency
Maximum Recommended Pressure Drop..........10 psig Largest Aerosol Particle Passed (Grade 6)............. 0.01 Micron
(Element should be replaced) Largest Solid Particle Passed (Grade 6).................. 0.30 Micron
Minimum Recommended Flow – Seals ..........................................................................................Nitrile
20% Nominal Rating of Element Sight Gauge ...................................................................... Polyamide
Port Threads............................................................1/4, 3/8, 1/2 Inch
C
DPI Electronic DPI
as air gauging and pneumatic
instrumentation and controls.
• Interchangeable twist and automatic float drains. E
Selection
E F
3/4" 12F44EC 12F48EC
Filter /
Ordering Information
Accessories
12F 3 2 E C — —
Technical Information
Grade 6
Primary Pressure - bar Primary Pressure - bar
2.4 bar 6.2 bar 10.3 bar 2.4 bar 6.2 bar 10.3 bar
Primary Pressure - PSIG Primary Pressure - PSIG
35 PSIG 90 PSIG 150 PSIG 35 PSIG 90 PSIG 150 PSIG
10 10
9 9
.6 .6
8
Pressure Drop - PSIG
.4 6 6
.4
5 5
.3 .3
4 4
C
.2 3 .2 3
2 2
.1 Flow Characteristics .1 Flow Characteristics
1 12F31E* 1 12F41E*
1/2 Inch Ports 3/4 Inch Ports
0 0 0 0
0 50 100 150 200 250 0 50 100 150 200 250 300
Flow - SCFM Flow - SCFM
Selection
Product
0 20 40 60 80 100 0 20 40 60 80 100 120
3 3
Flow - dm /s Flow - dm /s
n n
Filters
35 PSIG 90 PSIG 150 PSIG 35 PSIG 90 PSIG 150 PSIG
10 10
9 9
.6 .6
8
.5 .5
7 7
Coalescers
6 .4 6
.4
5 5
.3 .3
4 4
.2 3 .2 3
2 2
Flow Characteristics
Regulators
.1 Flow Characteristics .1
1 1 12F41H*
12F31H*
1/2 Inch Ports 3/4 Inch Ports
0 0 0 0
0 50 100 150 200 250 0 50 100 150 200 250 300
Flow - SCFM Flow - SCFM
Regulators
n
Filter /
12F Coalescing Filter Kits & Accessories Pressure & Temperature Ratings –
Bowl Guard Kit ...................................................................... PS805P Without Differential Pressure Indicator:
Bowl Kits – Polycarbonate Bowl – 0 to 150 psig (0 to 10.3 bar)
32°F to 125°F (0°C to 52°C)
Lubricators
Poly Bowl – Automatic Float Drain.................................... PS822P
Twist Drain..................................................... PS832P Metal Bowl – 0 to 250 psig (0 to 17.2 bar)
Metal Bowl – Automatic Float Drain.................................... PS826P 32°F to 175°F (0°C to 80°C)
Twist Drain..................................................... PS834P With Differential Pressure Indicator: 0 to 150 psig (0 to 10.3 bar)
Sight Gauge / Automatic Float Drain............. PS823P 32°F to 125°F (0°C to 52°C)
Sight Gauge / Twist Drain.............................. PS835P Automatic Float Drain – 15 to 250 psig (1.0 to 17.2 bar)
Combos
DPI Replacement Kit .............................................................PS781P Weight ...........................................................................2.4 lb. (1.1 kg)
Electronic DPI Replacement Kit ............................................PS764
Drain Kits – Automatic Float Drain.................................... PS506P Materials of Construction
Semi-Auto Drain............................................. PS511P
Accessories
Twist Drain......................................................PS512P Body ............................................................................................. Zinc
Push ‘N’ Drain.................................................PS513P Bowls ...................................................... Transparent Polycarbonate
Electrical Connector - 15mm, 3-Pin DIN, 6 Ft. Cord..... PS2932JBP Metal (Zinc) With or Without Sight Gauge
Filter Element Kits – Grade 6 (Standard)............................ PS824P Bowl Guard ................................................................................. Steel
Grade 10 (Optional)........................... PS830P Collar .......................................................................... Plastic or Metal
Mounting Bracket Kit ........................................................... PS843P Drains – Twist Drain – Body & Nut.......................................... Plastic
Sight Gauge Kit ......................................................................PS914P Push ‘N’ Drain – Body.................................................Nitrile
Stem.................................................Brass
Specifications Automatic Float Drain –.....................Housing, Float Plastic
Bowl Capacity ..................................................................7.2 Ounces Seals................................................Nitrile
Sump Capacity ................................................................ 2.8 Ounces Springs, Push Rod........... Stainless Steel
Operation – Normal Operating Pressure Drop..........................2 psig Filter Element –
Maximum Recommended Pressure Drop..........10 psig Borosilicate & felt glass fibers 99.97% DOP efficiency
(Element should be replaced) Largest Aerosol Particle Passed (Grade 6)................. 0.01 Micron
Minimum Recommended Flow – Largest Solid Particle Passed (Grade 6)...................... 0.30 Micron
20% Nominal Rating of Element Seals ..........................................................................................Nitrile
Port Threads ............................................................... 1/2 & 3/4 Inch Sight Gauge ...................................................................... Polyamide
D
3/4" – 130 SCFM §
1" – 140 SCFM §
s
1-1/2"† – 150 SCFM §
m
Filters
Grade 10 Element
e
Distance Required
t
3/4" – 195 SCFM §
i
F To Remove All
Bowls Regardless
1" – 215 SCFM §
t
of Drain Option
u
1-1/2"† – 225 SCFM §
Coalescers
e d o t e
y l e
NPT P3NF Coalescing
a
Port
o
Filter Dimensions
Gr e obs
Size
Regulators
ar
1" P3NFA98DSM P3NFA98DSA C D† E†
Regulators
Filter /
Ordering Information
Accessories
P3N f a 9 8 D s m
Note: BSPP ported units supplied using NPT ported bodies and BSPP port block kits.
BOLD ITEMS ARE MOST POPULAR.
Technical Information
Grade 6
Primary Pressure - bar Primary Pressure - bar Primary Pressure - bar
2.4 bar 6.2 bar 10.3 bar 2.4 bar 6.2 bar 10.3 bar 2.4 bar 6.2 bar 10.3 bar
Primary Pressure - PSIG Primary Pressure - PSIG Primary Pressure - PSIG
35 PSIG 90 PSIG 150 PSIG 10
35 PSIG 90 PSIG 150 PSIG 35 PSIG 90 PSIG 150 PSIG
10 10
9 9 9
.6 .6 .6
8
.5 .5 .5
.4 6 .4 6 .4 6
5 5 5
.3 .3 .3
4 4 4
3 .2 3 .2 3
C
.2
2 2 2
.1 .1 Flow Characteristics .1 Flow Characteristics
1 Flow Characteristics 1 1
P3NF 3/4 Inch Ports P3NF 1 Inch Ports P3NF 1-1/2 Inch Ports
0 0 0 0 0 0
0 50 100 150 200 250 300 0 50 100 150 200 250 300 0 50 100 150 200 250 300
Flow - SCFM Flow - SCFM Flow - SCFM
0 25 50 75 100 125 0 25 50 75 100 125 0 25 50 75 100 125
3 3 3
Flow - dm /s Flow - dm /s Flow - dm /s
n
Selection
n n
Product
m s
Filters
t it e Grade 10
Coalescers
o e
Primary Pressure - bar Primary Pressure - bar Primary Pressure - bar
d
2.4 bar 6.2 bar 10.3 bar 2.4 bar 6.2 bar 10.3 bar 2.4 bar 6.2 bar 10.3 bar
e t
Primary Pressure - PSIG Primary Pressure - PSIG Primary Pressure - PSIG
e
35 PSIG 90 PSIG 150 PSIG 35 PSIG 90 PSIG 150 PSIG 35 PSIG 90 PSIG 150 PSIG
10 10 10
y l
9 9 9
a
.6 .6 .6
o
8 8
Pressure Drop - PSIG
Pressure Drop - PSIG
Regulators
.5 .5 .5
7 7 7
.4 6 .4 6 .4 6
5 5 5
.3 .3 .3
4 4 4
.2 3 .2 3 .2 3
ar
2 2 2
.1 Flow Characteristics .1 Flow Characteristics .1 Flow Characteristics
Regulators
1 P3NF 3/4 Inch Ports 1 1
P3NF 1 Inch Ports P3NF 1-1/2 Inch Ports
Filter /
0 0 0 0 0 0
0 50 100 150 200 250 300 350 400 0 50 100 150 200 250 300 350 400 0 50 100 150 200 250 300 350 400
Flow - SCFM Flow - SCFM Flow - SCFM
0 25 50 75 100 125 150 175 0 25 50 75 100 125 150 175 0 25 50 75 100 125 150 175
3 3 3
Flow - dm /s Flow - dm /s Flow - dm /s
n n n
Lubricators
P3NF Coalescing Filter Kits & Accessories Specifications
Combos
Bowl Kits – Bowl Capacity ................................................................18.0 Ounces
Metal Bowl – Sump Capacity .................................................................6.8 Ounces
Sight Gauge / Automatic Float Drain..................P3NKA00BSA Filter Element –
Accessories
Sight Gauge / Twist Drain.................................. P3NKA00BSM Borosilicate & felt glass fibers 99.97% DOP efficiency
Sight Gauge / Push ‘N’ Drain..............................P3NKA00BSP Largest Aerosol Particle Passed (Grade 6)................. 0.01 Micron
Bowl Latch Kit........................................................................C11A33 Largest Solid Particle Passed (Grade 6)...................... 0.30 Micron
DPI Replacement Kit ............................................................ PS781P Pressure & Temperature Rating – . ..... 0 to 250 psig (0 to 17.2 bar)
Drain Kit – 32°F to 175°F (0°C to 80°C)
Automatic Float Drain.......................................................... PS506P Automatic Float Drain – 15 to 250 psig (1.0 to 17.2 bar)
Semi-Auto Drain.................................................................. PS511P
Twist Drain........................................................................... PS512P Materials of Construction
Push ‘N’ Drain...................................................................... PS513P Body & Bowl ....................................................................... Aluminum
Filter Elements – Grade 6 (Standard).................... P3NKA00ESCB Deflector .................................................................................. Plastic
Grade 10 (Optional) ..................... P3NKA00ES9 Drain ......................................................................................... Plastic
Sight Gauge Kit ............................................................P3NKA00PE Seals ..........................................................................................Nitrile
Mounting Bracket Kit* ................................................ P3NKA00MW Sight Gauge ......................................................... Polyamide (Nylon)
Weight – 3/4"............................................................... 3.5 lb. (1.6 kg)
* If 1-1/2 BSPP E02 fittings are required, use P3NKA0BMW. 1".................................................................. 3.5 lb. (1.6 kg)
1-1/2" † ........................................................ 4.6 lb. (2.1 kg)
† 1" Port Body with 1-1/2" Port Block.
Features
D
• Removes liquid aerosols and
sub-micron particles.
• Protects pneumatic systems from A
B
A
contamination that standard particulate
C
filters will not catch.
• Two different grade elements available.
E
• Differential pressure indicator (pop-up )
standard.
Selection
Product
* Dry media flow. For wet media info see table on next page.
Combos
Ordering Information
Accessories
F 701 — 06 E 3 P — /**
Port Threads Port Size Bowl Element Element Service Bowl Drains Engineering
— NPT 06 3/4 Inch E Metal without 3 Grade 6 Indicator Blank Manual Twist Level
G BSPP 08 1 Inch Sight Gauge 7 Grade 10 Blank None Drain * Will be
32 oz. P Pop-up T High Pressure Entered
L Metal without Style Internal Auto at Factory
Sight Gauge G Differential Drain
100 oz. Pressure Q* External Auto
Gauge Drain
R Low Pressure * “Q” Option Not
Internal Auto Drain Available with
Bowl Option “L”.
BOLD ITEMS ARE MOST POPULAR.
Technical Information
F701-06E3* F701-06L3*
F701-08E3* F701-08L3*
100
90
80
60
Media Specifications
C
50
40
G D.O.P. Pressure Drop (PSID)2 @
r Maximum Oil Rated Flow 30
Coalescing Efficiency
a Carryover1
d 0.3 to 0.6 Micron Media Wet With 20
PPM w/w Media Dry
e Particles 10-20 wt. oil
Selection
Product
10
6 99.97% 0.008 1.0 2-3
0
10 95% 0.85 0.5 0.5 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170
1 Tested Flow - SCFM
per BCAS 860900 at 40 ppm inlet.
2 Add dry + wet for total pressure drop. 0 10 20 30 40 50 60 70 80
D.O.P. = Dioctylphthalate Flow - dmn3/s
Filters
Coalescers
Regulators
F701 Filter Kits & Accessories Minimum Recommended Flow – ....................... 20% of Rated Flow
Regulators
Mounting Bracket – Maximum Pressure (Manual Drains) – . ...... 0 to 300 psig (0-20 bar)
Filter /
Port Size Maximum Pressure (Auto Drains) –
3/4 (Pair of Pipe Mounted Brackets)............................. SA200AW57 “R” Drain (Low Pressure Internal)........................... 175 psig (12 bar)
1 (Pair of Pipe Mounted Brackets)................................ SA200CW57 “T” Drain (High Pressure Internal).......................... 250 psig (17 bar)
Bowl Kit – “Q” Drain (External)................................................ 250 psig (17 bar)
Lubricators
Port Size Maximum Temperature . .......................32°F to 150°F (0°C to 65°C)
3/4, 1 Inch (E) 32 oz.............................................................BK603B Maximum temperature with “T”, “R”, or “Q” Drains ...... 125°F (52°C)
3/4, 1 Inch (L) 100 oz........................................................... BK603C
Weight –
Differential Pressure Pop Up Indicator Repair Kit . ........... RK701P 3/4 & 1 Inch (E) 32 oz.....................................................5 lb. (2.3 kg)
(only works with originally equipped units) 3/4 & 1 Inch (L) 100 oz...................................................8 lb. (3.6 kg)
Combos
Differential Pressure Gauge ............................................... DP276-P
(only works on units without pop-up indicator) Materials of Construction
Drain Kits – Body & Flange Ring ...................................................................Zinc
Accessories
Internal Automatic Drain - High Pressure (T)................... SA702MD
Manual Twist Drain......................................................... SA600Y7-1 Bowl –
Metal Bowl (E) (L).............................................................. Aluminum
Filter Element Kits –
Port Size / Grade 6 Drains –
Auto Float Drain –
3/4, 1 Inch (E) 32 oz...................................................F701-C3-0773
Housing “R”, “T” (Internal)..................................................... Acetal
3/4, 1 Inch (L) 100 oz..................................................F701-C3-0774
Housing “Q” (External)......................................................... Bronze
Port Size / Grade 10 Manual Twist Drain................................................................... Brass
3/4, 1 Inch (E) 32 oz...................................................F701-C7-0773
Seals & Float .......................................................................... Buna N
3/4, 1 Inch (L) 100 oz..................................................F701-C7-0774
Springs ........................................................................Stainless Steel
Specifications Elements (Media) ....................................... Borosilicate Fibers & Felt
Operation – Element End Caps ...............................................................Urethane
Maximum Recommended Pressure Drop..............................10 psig Seals ....................................................................................... Buna N
(element should be replaced)
Normal Operating Pressure Drop (Dry)....................................2 psig
Normal Operating Pressure Drop (Wet)...................................5 psig
( ) = Bowl Type
C
eliminate the guesswork of element
replacement
• Differential pressure gauge available,
order separately, Kit DP3-01-000
Selection
Product
E
• Unique drain mounting plate design D
offers a trouble-free method for
interchanging and installing
external drains
Filters
G
2" – 710 SCFM §
3" – 1770 SCFM §
* Without
Differential Pressure Indicator –
Max. supply pressure is 250 PSIG (20.7 bar).
Regulators
Ordering Information
35F 7 7 H A P
Technical Information
35F77EAP 35F87EAP
PSID
PSID
bar
bar
0.3 0.3
4 4
Pressure Drop
Pressure Drop
3 3
0.2 0.2
0.1
2
0.1
2
C
1 1
Selection
Product
0 0 0 0
0 200 400 600 800 1000 0 200 400 600 800 1000
Flow - SCFM Flow - SCFM
0 100 200 300 400
0 100 200 300 400
3 Flow - dmn3/s
Flow - dmn /s
Filters
43FN7HAP
PSID
bar
Inlet Pressure
PSIG 15 35 60 90 100 120 150
bar
Coalescers
1.0 2.4 4.1 6.2 7.0 8.2 10.3
5
0.3
4
Pressure Drop
Regulators
3
0.2
0.1
Regulators
1
Filter /
0 0
0 500 1000 1500 2000 2500
Flow - SCFM
Lubricators
0 200 400 600 800 1000 1200
Flow - dmn3/s
Combos
Pressure Pressure Gauge........... 250 PSIG (17.2 bar)*
Differential Pressure Indicator Cap – with DPI......................... 150 PSIG (10.3 bar)
For pressures over 150 PSIG.......................... GRP-95-022 Operating Temperature..........................32° to 150°F (0° to 65.5°C)
Differential Pressure Gauge................................. DP3-01-000
Accessories
Port Size –
Differential Pressure Indicator............................. DP2-02-001 35F............................................................................... 1-1/2, 2 Inch.
43F......................................................................................... 3 Inch
Drain, Automatic, Internal, Fluorocarbon,
Standard Filtration* – Micron.............................................. 1.0, 0.01
1/8 NPT............................................................GRP-95-981 Adsorber............................. Activated carbon
Drain Plate Kit – Weight – 35F..........................................19.3 lb. (8.7 kg
1/2 NPT Tapped Drain Port............................. GRP-95-393 43F...................................... 32.8 lb. (14.9 kg)
Element * Filtration temperature of 70°F (21°C) @100 PSIG (6.9 bar) with typical
35F: 0.01 Micron...............................................MTP-95-502 compressor lubricating oil and protected by 0.01 micron filter.
35F: 1.0 Micron................................................ MSP-95-502
35F: Adsorber.................................................. MXP-95-502 Materials of Construction
43F: 0.01 Micron...............................................MTP-95-562 Body.................................................................................... Aluminum
43F: 1.0 Micron.................................................MSP-95-876 Bowls................................................................................... Aluminum
43F: Adsorber.................................................. MXP-95-565 Filter Element – 0.01 & 1.0 Micron.................Borosilicate Cloth
Manual Drain Kit Adsorber.............................. Activated Carbon
with 1/2" Drain Plate........................................ GRP-95-392 Seals...............................................................................Fluorocarbon
Stud..................................................................................Plated Steel
Features 21.13
(537)
(603)
C
• Designed in accordance with 13
(330)
14.38
(365)
ASME and CRN
• Connection sizes: 4 inch & 6
inch flange
Selection
Product
P3TF Series
4" 1.0
2755 4 P3TFAFFQ2AN
Service Kits
Filter /
Flange micron
6" 0.01
Flange
4132
micron
6 P3TFAFGD3AN Number
Description Required P3TF Series
Lubricators
6" 1.0
Flange
4132
micron
6 P3TFAFGQ3AN Dp Gauge Replacement Kit DPG-Kit
Drain Kit - 1/2" NPT HDF-120-NPT-A
0.01 Micron 4 or 6 PSY1035002
Filter Element Kit
1.0 Micron 4 or 6 PSY1035001
Materials of Construction
Combos
Drain Kit
(Shipped loose)
4.25
(108)
Selection
Product
Filters
Coalescers
Regulators
Regulators
Filter /
Lubricators
Combos
Accessories
C
5
4 60
• Economy 15R Series, 1/4 and 3/8 Inch Once the required flow is determined for a pneumatic
• Economy 05R Series, 1/4 and 3/8 Inch application the regulator or filter/regulator can be
Coalescers
• Compact 06R Series, 1/4, 3/8 and 1/2 Inch selected by using the flow chart. The chart serves two
different purposes. To read the flow, use the right side
• Standard 07R Series, 3/8, 1/2 and 3/4 Inch of the chart. To read the relief characteristics use the
left side of the chart. When reading the flow chart, first
• Hi-Flow P3NR Series, 3/4, 1 and 1-1/2 Inch
Regulators
2-1/2 Inch
Miniature Regulators for Water Service ! WARNING
• Miniature R24 Series, 1/4 and 3/8 Inch Product rupture can cause serious injury.
Combos
Regulator Selection
1. Determine maximum system flow requirements. CAUTION:
2. Determine maximum allowable pressure drop at REGULATOR PRESSURE ADJUSTMENT – The
rated flow in SCFM. working range of knob adjustment is designed to
3. Refer to flow chart and select regulator by permit outlet pressures within their full range. Pressure
choosing the curve that offers minimum adjustment beyond this range is also possible because
pressure drop at desired flow in SCFM. the knob is not a limiting device. This is a common
characteristic of most industrial regulators, and limiting
devices may be obtained only by special design.
For best performance, regulated pressure should
always be set by increasing the pressure up to the
desired setting.
Selection
Product
With the adjusting knob (A) turned fully
counterclockwise (no spring load), and pressure E
supplied to the regulator inlet port, the valve poppet
assembly (B) is closed. Turning the adjusting knob
Filters
clockwise applies a load to control spring (C). This
load causes the piston /diaphragm (D) and the valve
poppet assembly (B) to move downward allowing flow
Coalescers
across the seat area (E) created between the poppet
assembly and the seat. Pressure in the downstream D
line is sensed below the piston / diaphragm (D) and H
offsets the load of spring (C). As downstream pressure
F
Regulators
rises, poppet assembly (B) and control piston (C) move
upward until the area (E) is closed and the load of the
B G
spring (C) and pressure under piston / diaphragm (D)
are in balance. A reduced outlet pressure has now
Regulators
Filter /
been obtained, depending on spring load. Creating a
demand downstream, such as opening a valve, results
E
in a reduced pressure under the piston / diaphragm (D).
The load of control spring (C) now causes the poppet
Lubricators
assembly to move downward opening seat area (E)
allowing air to flow to meet the downstream demand.
The flow of downstream air is metered by the amount of
opening (E).
Combos
During low flow requirements, the amount of opening
at the seat (E) is small, while at high flows it is large.
The downstream pressure signal, which regulates the
Accessories
amount of opening, requires an adjustment over this
range, in order to attempt a constant output. This
adjustment is the orifice (G), which is sized and located
in such a manner as to provide a compensation to the
downstream pressure signal transmitted to the piston.
This effect is called aspiration and its effect is to
maintain downstream pressure nearly constant over a
wide range of flow demands.
Should downstream pressure exceed the desired
regulated pressure, the excess pressure will cause the
piston / diaphragm (D) to move upward against control
spring (C), open vent hole (F), and vent the excess
pressure to atmosphere through the hole in the bonnet
(H). (This occurs in the relieving type regulator only.)
C
E
• Compact, 2.88 inch (73,2mm) (2) C
E
E
14R 14R**L*
F OUTLET
1/4" – 15 SCFM § INLET
G
F B
0.379 C'Bore
.048 / .056 Deep H
Filters
0.094
2 Places J Roll Pin
0.180 (4.6mm) Dia.
4 Holes 14RM
Without Gauge A B C D E
1/8" 14R013FC 14R 1.65 1.56 2.50 0.38 2.88
(42) (40) (63.5) (10) (73)
1/4" 14R113FC
A B C D E
Regulators
Ordering Information
14R 1 13 F C — — ---
Combos
Port Size Pressure Range Relief Port Type Options Preset / Pressure
Accessories
0 1/8 Inch Pipe, Without Gauge F Relieving Blank NPT Blank No Options Limited
1/8 Inch Yellow Knob Black Knob G Non-Relieving 1 BSPP L
†
Preset Non- Blank None
Gauge Port 10 30 psig B0 30 psig H Low Temp. 2 BSPT Adjustable XXX* Preset
1 1/4 Inch Pipe, 11 60 psig B1 60 psig Relieving P
†
Preset Pressure
1/8 Inch 12 15 psig B2 15 psig J Low Temp. Adjustable XXX* Pressure
Gauge Port Non-Relieving S
†
Pressure Limited
13 125 psig B3 125 psig
B 1/4 Inch Pipe, Limiter Max. * Available Preset /
With Gauge*
1/4 Inch Adjustable Pressure Limited
Gauge Port 15 30 psig B5 30 psig Engineering
T Pressure Range, 10 to 90 psig
†
Technical Information
C
4 60 60
4
3 3
40 40
2 2
Selection
Product
20 20
1 1
1/8 Inch Ports 1/4 Inch Ports
100 PSIG (6.9 bar) Primary Pressure 100 PSIG (6.9 bar) Primary Pressure
0 0 0 0
0 5 10 15 20 25 30 35 40 0 5 10 15 20 25 30 35 40
Rated Flow - SCFM Rated Flow - SCFM
0 2 4 6 8 10 12 14 16 18
Filters
0 2 4 6 8 10 12 14 16 18
3 3
Flow - dm /s Flow - dm /s
n n
Coalescers
CAUTION: ! WARNING
REGULATOR PRESSURE ADJUSTMENT – The working
Product rupture can cause serious injury.
range of knob adjustment is designed to permit outlet
Do not connect regulator to bottled gas.
Regulators
pressures within their full range. Pressure adjustment beyond
Do not exceed maximum primary pressure rating.
this range is also possible because the knob is not a limiting
device. This is a common characteristic of most industrial
regulators, and limiting devices may be obtained only by
special design.
Regulators
Filter /
For best performance, regulated pressure should always be
set by increasing the pressure up to the desired setting.
Lubricators
14R Regulator Kits & Accessories Specifications
Combos
Bonnet Assembly Kit ........................................................... L01369 Gauge Ports (2) ..........................................................1/8 or 1/4 Inch
Bonnet Tamperproof Kit....................................................... P01265 (Can be used for Full Flow)
Port Threads .................................................................. 1/8, 1/4 Inch
Accessories
Gauges – 30 psig, 1/8" NPT (0 to 2.1 bar).................. K4515N18030
60 psig, 1/8" NPT (0 to 4.1 bar).................. K4515N18060 Pressure & Temperature Ratings – 0 to 300 psig (0 to 20.7 bar)
160 psig, 1/8" NPT (0 to 11.0 bar)...............K4515N18160 . 32°F to 125°F (0°C to 52°C)
60 psig, 1/4" NPT (0 to 4.1 bar).................. K4520N14060 Low Temperature..............................-4°F to 125°F (-20°C to 52°C)
160 psig, 1/4" NPT (0 to 11.0 bar)...............K4520N14160 Secondary Pressure Ranges –
Mounting Bracket Kit* (Includes Panel Mount Nut)........... PS417BP Standard Pressure.................................2 to 125 psig (0 to 8.6 bar)
Medium Pressure..................................... 1 to 60 psig (0 to 4.1 bar)
Panel Mount Nuts* – Plastic..................................................P78652
Metal.................................................... P01531 Medium Pressure.....................................1 to 30 psig (0 to 2.1 bar)
Poppet / Piston Kits – Unbalanced, Non-Relieving............ PS428P Low Pressure..............................................1 to 15 psig (0 to 1 bar)
Unbalanced, Relieving....................PS426P Weight – 14R, 14RM, 14**L*....................................... 0.3 lb. (0.14 kg)
Springs – 1-15 psig Range (Yellow)........................................ P01176
1-30 psig Range (Black)......................................... P01175 Materials of Construction
1-60 psig Range (White).........................................P01174 Adjusting Nut.............................................................................Brass
2-125 psig Range (Gold)........................................ P01173 Adjusting Stem & Spring ......................................................... Steel
Body ............................................................................................. Zinc
Bonnet, Seat, Piston & Valve Poppet ................................... Plastic
*Tighten panel mount nut 2.8 to 3.4 Nm (25 to 30 in-lbs) of torque. Seals ..........................................................................................Nitrile
D
Coalescers
1/8" P3A-RN91YGN D E
0.46 2.92
1/4" P3A-RN92YGN
Regulators
(12) (74)
Filter /
Standard part numbers shown bold. For other models refer to Inches (mm)
ordering information below.
NOTE: 1.218 Dia. (31mm) hole required for panel mounting.
Lubricators
§ SCFM = Standard cubic feet per minute at 100 psig inlet, 90 psig no
flow secondary setting and 10 psig pressure drop.
Ordering Information
Combos
P3A-RN 9 1 Y N N N —
Accessories
Port Type Port Size Relief Pressure / Gauge Options Options Preset / Pressure
9 NPT 1 1/8 Inch Q Non-Relieving Without Gauge L* Preset Non-Adjustable N None Limited
Female 2 1/4 Inch Y Relieving A 15 psig (0 to 1 bar) N No Options Blank None
L 60 psig (0 to 4 bar) P* Preset Adjustable XXX* Preset
N 120 psig (0 to 8 bar) S* Pressure Limiter Pressure
Y 30 psig (0 to 2 bar) Adjustable XXX* Pressure
T* Pressure Limiter Limited
With Gauge
Non-Adjustable * Available Preset /
B 15 psig (0 to 1 bar)
* Inlet Pressure is 100 psig. For Pressure Limited
G 120 psig (0 to 8 bar)
other pressures, contact factory. Range, 10 to 90 psig
M 60 psig (0 to 4 bar) in 5 psig increments.
Z 30 psig (0 to 2 bar) For higher pressures,
contact factory.
(Example:
BOLD ITEMS ARE MOST POPULAR. 065 = 65 psig)
Technical Information
C
4 60 4 60
3 3
40 40
2 2
Selection
Product
20 20
1 1
0 0 0 0
5 0 5 10 15 20 25 30 35 5 0 5 10 15 20 25 30 35
Flow - SCFM Flow - SCFM
Filters
2 0 2 4 6 8 10 12 14 16 2 0 2 4 6 8 10 12 14 16
3 3
Flow - dm /S Flow - dm /S
n n
Coalescers
CAUTION: ! WARNING
REGULATOR PRESSURE ADJUSTMENT – The working
Product rupture can cause serious injury.
range of knob adjustment is designed to permit outlet
Do not connect regulator to bottled gas.
pressures within their full range. Pressure adjustment beyond
Regulators
Do not exceed maximum primary pressure rating.
this range is also possible because the knob is not a limiting
device. This is a common characteristic of most industrial
regulators, and limiting devices may be obtained only by
special design.
Regulators
Filter /
For best performance, regulated pressure should always be
set by increasing the pressure up to the desired setting.
Lubricators
P3AR Regulator Kits & Accessories Specifications
Gauges – 30 psig, 1/8" NPT (0 to 2.1 bar)................... K4515N18030 Gauge Ports (2) .................................................................... 1/8 Inch
60 psig, 1/8" NPT (0 to 4.1 bar)................... K4515N18060 Operating Pressure Range – psig bar
160 psig, 1/8" NPT (0 to 11.0 bar)................K4515N18160 Primary – Maximum 120 8.3
Mounting Bracket Kit* (Includes Panel Mount Nut)........... PS417BP Secondary –
Combos
Panel Mount Nut* ..................................................................P78652 15 psig Spring Minimum 1 0.07
Maximum 15 1.0
Poppet / Piston Kits – Unbalanced, Non-Relieving............ PS428P
Unbalanced, Relieving....................PS426P 30 psig Spring Minimum 6 0.4
Accessories
Maximum 30 2.1
Springs – 1-15 psig Spring (Yellow)........................................P01176
60 psig Spring Minimum 6 0.4
1-30 psig Spring (Black)..........................................P01175
Maximum 60 4.1
1-60 psig Spring (White).........................................P01174
5-110 psig Spring (Gold).........................................P01173 110 psig Spring Minimum 6 0.4
Maximum 110 7.6
Operating Temperature Range . ......... 32°F to 125°F (0°C to 52°C)
Port Threads . ................................................................ 1/8, 1/4 Inch
Weight ..................................................................... 0.23 lb. (0.10 kg)
Materials of Construction
Adjusting Nut ..........................................................................Brass
Adjusting Stem & Spring ......................................................... Steel
Poppet Return Spring ............................................... Stainless Steel
Body ........................................................................................ Plastic
Bonnet, Seat & Piston ........................................................... Plastic
Seals ..........................................................................................Nitrile
*Tighten panel mount nut 2.8 to 3.4 Nm (25 to 30 in-lbs) of torque. Valve Poppet ..............................................................Plastic & Nitrile
C
D
regulation and high flow C1
E1
3.07
capacity. .095 Roll Pin
for Alignment
• Balanced valve design for I
N 9.63 C’Bore F 4.57
(116.08mm) Dia.
1.42/1.22 Deep G
precise regulation. 4 Holes
Selection
2 Places
Product
G
• Available in 2 or 4 port A B
Ordering Information
Accessories
R34 4 – 02 C G
Technical Information
Relief And Flow Characteristics Relief And Flow Characteristics
R342-0MC R344-01C
100 100
1/8 Inch Ports 1/8 Inch Ports
90 100 PSIG (6.9 bar) Primary Pressure 90 100 PSIG (6.9 bar)
Secondary Pressure - PSIG Primary Pressure
60 60
4 4
50 50
3 3
C
40 40
2 30 2 30
20 20
1 1
10 10
Selection
Product
0 0 0 0
0 5 10 15 20 25 0 5 10 15 20 25
Rated Flow - SCFM Rated Flow - SCFM
0 2 4 6 8 10 0 2 4 6 8 10
3 3
Flow - dm /s Flow - dm /s
n n
Filters
Coalescers
CAUTION: Relief And Flow Characteristics
R344-02C
100
REGULATOR PRESSURE ADJUSTMENT – The working 1/4 Inch Ports
100 PSIG (6.9 bar)
range of knob adjustment is designed to permit outlet 90
Primary Pressure
Regulators
Secondary Pressure - bar
pressures within their full range. Pressure adjustment beyond 80
this range is also possible because the knob is not a limiting 5 70
device. This is a common characteristic of most industrial 60
4
regulators, and limiting devices may be obtained only by
50
special design.
Regulators
3
Filter /
40
For best performance, regulated pressure should always be
30
set by increasing the pressure up to the desired setting. 2
20
1
WARNING
Lubricators
! 10
0 0
Product rupture can cause serious injury. 0 5 10 15 20 25
Do not connect regulator to bottled gas. Rated Flow - SCFM
Do not exceed maximum primary pressure rating. 0 2 4 6 8 10
3
Flow - dm /s
Combos
n
Accessories
R34 Regulator Kits and Accessories Materials of Construction
Diaphragm Assembly - Non-relieving........................... GRP-96-726 Body.................................................................................... Aluminum
Relieving.................................. GRP-96-725 Bonnet....................................................................................... Acetal
Spring, Regulating - 0 to 30 psig (0 to 2.1 bar)............. GRP-95-111 Diaphragm & Seals...................................................................Nitrile
0 to 60 psig (0 to 4.1 bar)............. GRP-96-718
Valve Assembly.........................................................................Brass
0 to 125 psig (0 to 8.6 bar)........... GRP-96-717
Springs........................................................................................ Steel
Panel Mount Nut – Aluminum............................................R05X51-A
Plastic.................................................R05X51-P Panel Nut................................................................................... Acetal
Mounting Bracket Kit (Includes Panel Mount Nut).......... SA161X57 Specifications
Gauges – 0 to 60 psig (0 to 4.1 bar), 1-1/2" Dial Face, Operating Temperature.............. -40° F to 150°F (-40° C to 65.5°C)
1/8 NPT, CBM............................................. K4515N18060 Supply Pressure..................................300 psig Maximum (20.4 bar)
0 to 160 psig (0 to 11.0 bar), 1-1/2" Dial Face,
Port Threads................................................................... 1/8, 1/4 Inch
1/8 NPT, CBM............................................. K4515N18160
Gauge Ports............................................................... (2) Std 1/8 Inch
Tamperproof Knob Kit.....................................................P31KB00AT
(No Gauge Port Version Available)
Weight........................................................................25 lbs. (0.11 kg)
PU
SH
K
–L O C
• Diaphragm Operated
1/8" NPT
Gauge Ports C
(2) E
Filters
D
Coalescers
Ordering Information
Combos
R25 — 02 C
Accessories
Technical Information
300 50
50
200
25
C
25 100
0 0
0 0 0.5 1 1.5 2 2.5 3 3.5
0 5 10 15 Flow - GPM
Flow - SCFM
0 2.0 4.0 6.0 8.0 10.0 12.0
0 2 4 6
Selection
Product
3 Flow - l/min
Flow - dm /s
n
Filters
Coalescers
CAUTION: ! WARNING
REGULATOR PRESSURE ADJUSTMENT – The working
Product rupture can cause serious injury.
range of knob adjustment is designed to permit outlet
Do not connect regulator to bottled gas.
pressures within their full range. Pressure adjustment beyond
Regulators
Do not exceed maximum primary pressure rating.
this range is also possible because the knob is not a limiting
device. This is a common characteristic of most industrial
regulators, and limiting devices may be obtained only by
special design.
Regulators
Filter /
For best performance, regulated pressure should always be
set by increasing the pressure up to the desired setting.
Lubricators
Combos
R24, R25 Regulator Kits and Accessories Materials of Construction
Panel Mount Nut – Plastic .................................................R05X51-P Adjusting Screw ........................................................................ Steel
Accessories
Aluminum . ..........................................R05X51-A Body .......................................................................................... Acetal
Mounting Bracket and Nut .............................................. SA161X57
Bonnet and Seat ...................................................................... Acetal
Service Kits – Relieving (Buna) . ......................................... RKR25Y
Non-Relieving (Buna) . ...............................RKR25KY Diaphragm (R25).................................................................... Buna N
Relieving (EPDM) . ....................................... RKR24Y Diaphragm (R24)...................................................................... EPDM
Non-Relieving (EPDM) . .............................RKR24KY
Seals (R25)............................................................................. Buna N
Springs – 0-25 psig Spring............................................... SPR-375-1
0-60 psig Spring...................................................SPR-376 Seals (R24)............................................................................... EPDM
0-125 psig Spring.................................................SPR-377 Springs ....................................................................... Stainless Steel
Valve Poppet (R25)................................................................ Buna N
Specifications Valve Poppet (R24).................................................................. EPDM
Gauge Ports (2) .................................................................... 1/8 Inch
(Can be used for full flow)
Pressure Rating – Maximum Inlet Pressure 150 psig.........(10.0 bar)
Port Threads .................................................................. 1/8, 1/4 Inch
Temperature Rating ............................. 40°F to 125°F (4°C to 52°C)
Weight ......................................................................0.25 lb. (0.11 kg)
PU
K
SH
• Non-rising, Push-to-lock Adjusting Knob –L O
C
C • Compact, 3.43 inch (87.1mm) high by
2.06 inch (52.3mm) wide
• Lightweight
Selection
Product
• Diaphragm Operated
1/4" NPT
Gauge Ports C
(2) E
Filters
D
Coalescers
Ordering Information
Combos
R45 — 02 C
Accessories
Technical Information
80 500
80
5
400
4 60 60
3
40
300
40
C
200
2
20 20
Selection
100
Product
1
0 0 0
0 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
0 5 10 15 20 25 30 35 40 45 50 55 60
Flow - SCFM Flow - GPM
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28
3 0 2.0 4.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0
Filters
Flow - dm /s
n Flow - l/min
Coalescers
CAUTION: ! WARNING
REGULATOR PRESSURE ADJUSTMENT – The working
Product rupture can cause serious injury.
range of knob adjustment is designed to permit outlet
Do not connect regulator to bottled gas.
pressures within their full range. Pressure adjustment beyond
Regulators
Do not exceed maximum primary pressure rating.
this range is also possible because the knob is not a limiting
device. This is a common characteristic of most industrial
regulators, and limiting devices may be obtained only by
special design.
Regulators
Filter /
For best performance, regulated pressure should always be
set by increasing the pressure up to the desired setting.
Lubricators
Combos
R45, R46 Regulator Kits and Accessories Materials of Construction
Accessories
Panel Mount Nut – Plastic .................................................... R05X51 Adjusting Screw ........................................................................ Steel
Aluminum . ...........................................R05X51A Body .......................................................................................... Acetal
Mounting Bracket and Nut .............................................. SA161X57
Bonnet and Seat ...................................................................... Acetal
Service Kits – Relieving ...................................................... RKR45Y
Non-Relieving . ...........................................RKR45KY Diaphragm (R45).................................................................... Buna N
Springs – 0-25 psig Spring.....................................................SPR-46 Diaphragm (R46)...................................................................... EPDM
0-60 psig Spring.....................................................SPR-47 Seals (R45)............................................................................. Buna N
0-125 psig Spring...................................................SPR-48
Seals (R46)............................................................................... EPDM
Specifications Springs ....................................................................... Stainless Steel
Gauge Ports (2) .................................................................... 1/4 Inch Valve Poppet (R45)................................................................ Buna N
(Can be used for full flow) Valve Poppet (R46).................................................................. EPDM
Pressure Rating – Maximum Inlet Pressure 150 psig.........(10.0 bar)
Port Threads .................................................................. 1/4, 3/8 Inch
Temperature Rating ............................. 40°F to 125°F (4°C to 52°C)
Weight ......................................................................0.38 lb. (0.17 kg)
C
1/8" NPT
Gauge Ports E
(2)
Filters
D
Coalescers
(13) (78)
Filter /
Inches (mm)
Lubricators
Ordering Information
Combos
20R 1 13 G C —
Accessories
Technical Information
Flow Characteristics
20R 1/8" & 1/4" Ports (Water)
100
100 PSIG (6.9 bar) Primary Pressure
C
4 60
3
40
Selection
Product
20
1
0 0
0 0.5 1.0 1.5 2.0 2.5 3.0 3.5
Flow - GPM (Water)
Filters
0 .02 .04 .06 .08 .10 .12 .14 .16 .18 .20 .22
Flow - L/SEC (Water)
Coalescers
CAUTION: ! WARNING
REGULATOR PRESSURE ADJUSTMENT – The working
Product rupture can cause serious injury.
range of knob adjustment is designed to permit outlet
Do not connect regulator to bottled gas.
pressures within their full range. Pressure adjustment beyond
Regulators
Do not exceed maximum primary pressure rating.
this range is also possible because the knob is not a limiting
device. This is a common characteristic of most industrial
regulators, and limiting devices may be obtained only by
special design.
Regulators
Filter /
For best performance, regulated pressure should always be
set by increasing the pressure up to the desired setting.
Lubricators
Combos
20R Regulator Kits & Accessories Specifications
Bonnet Kit ........................................................................PCKR364Y Gauge Ports (2) .................................................................... 1/8 Inch
Accessories
Bonnet Tamperproof Kit .................................................PCKR364T Port Threads .................................................................. 1/8, 1/4 Inch
Panel Mount Nut – Aluminum............................................R05X51-A Pressure Rating – Maximum ................0 to 300 psig (0 to 20.7 bar)
Plastic.................................................R05X51-P Secondary Pressure Ranges –
Mounting Bracket Kit ........................................................SA161X57 Standard Pressure.................................2 to 125 psig (0 to 8.6 bar)
Repair Kits – Relieving..................................................... PRKR164Y Medium Pressure..................................... 1 to 60 psig (0 to 4.1 bar)
Non-Relieveing........................................... PRKR163Y Medium Pressure..................................... 1 to 25 psig (0 to 2.1 bar)
Temperature Ratings ........................... 32°F to 125°F (0°C to 52°C)
Weight .......................................................................0.5 lb. (0.23 kg)
Materials of Construction
Adjusting Nut & Stem ............................................................... Steel
Body, Valve Poppet, Bottom Plug, Diaphragm Button ........Brass
Bonnet, Knob .......................................................................... Plastic
Seals, Diaphragm .................................................................. Buna N
Springs ....................................................................................... Steel
C
2.12 inch (54mm) wide.
• Easily serviced.
• High Flow: 1/4" – 21 SCFM §
3/8" – 28 SCFM §
Selection
Product
1/4" NPT C
Gauge Ports E
(2)
Filters
D
Coalescers
Inches (mm)
Standard part numbers shown bold. For other models refer to
ordering information below.
NOTE: 1.218 Dia. (31mm) hole required for panel mounting.
Lubricators
§ SCFM = Standard cubic feet per minute at 100 psig inlet, 90 psig no
flow secondary setting and 10 psig pressure drop.
Ordering Information
Combos
15R 1 13 F B
Accessories
Technical Information
4 60 60
4
2
40
3
40 C
2
20 20
1 1
Selection
1/4 Inch Ports 3/8 Inch Ports
Product
100 PSIG (6.9 bar) Primary Pressure 100 PSIG (6.9 bar) Primary Pressure
0 0 0 0
7 0 7 14 21 28 35 42 49 56 7 0 7 14 21 28 35 42 49 56
Rated Flow - SCFM Rated Flow - SCFM
2 0 2 4 6 8 10 12 14 16 18 20 22 24 26 2 0 2 4 6 8 10 12 14 16 18 20 22 24 26
3
Flow - dm /s Flow - dm /s
3
n n
Filters
Coalescers
CAUTION: ! WARNING
REGULATOR PRESSURE ADJUSTMENT – The working
Product rupture can cause serious injury.
range of knob adjustment is designed to permit outlet
Do not connect regulator to bottled gas.
Regulators
pressures within their full range. Pressure adjustment
Do not exceed maximum primary pressure rating.
beyond this range is also possible because the knob is not
a limiting device. This is a common characteristic of most
industrial regulators, and limiting devices may be obtained
only by special design.
Regulators
Filter /
For best performance, regulated pressure should always
be set by increasing the pressure up to the desired setting.
Lubricators
15R Regulator Kits & Accessories Specifications
Combos
Body Service Kit – Unbalanced ......................................PS424BP Gauge Ports (2) .................................................................... 1/4 Inch
Bonnet Assembly Kit .......................................................... L01369 (Can be used for Full Flow)
Gauges – 30 psig, 1/8" NPT (0 to 2.1 bar).................. K4515N18030 Port Threads ..................................................................1/4, 3/8 Inch
Accessories
60 psig, 1/8" NPT (0 to 4.1 bar).................. K4515N18060 Pressure & Temperature Ratings – 0 to 250 psig (0 to 17.2 bar)
160 psig, 1/8" NPT (0 to 11.0 bar)...............K4515N18160 32°F to 125°F (0°C to 52°C)
60 psig, 1/4" NPT (0 to 4.1 bar).................. K4520N14060 Low Temperature..............................-4°F to 125°F (-20°C to 52°C)
160 psig, 1/4" NPT (0 to 11.0 bar)...............K4520N14160 Secondary Pressure Ranges –
Mounting Bracket Kit* (Includes Panel Mount Nut)........... PS417BP Standard Pressure.................................2 to 125 psig (0 to 8.6 bar)
Panel Mount Nuts* – Plastic..................................................P78652 Medium Pressure..................................... 1 to 60 psig (0 to 4.1 bar)
Metal.................................................... P01531 Medium Pressure.....................................1 to 30 psig (0 to 2.1 bar)
Poppet / Piston Kits – Unbalanced, Non-Relieving............ PS428P Low Pressure..............................................1 to 15 psig (0 to 1 bar)
Unbalanced, Relieving....................PS426P
Weight .......................................................................0.5 lb. (0.23 kg)
Seal Kit – Unbalanced...........................................................PS454B
Springs – 1-15 psig Range (Yellow) ...................................... P01176
1-30 psig Range (Black) ....................................... P01175
Materials of Construction
1-60 psig Range (White) . ......................................P01174 Adjusting Nut............................................................................ Brass
2-125 psig Range (Gold) . ..................................... P01173 Adjusting Stem & Spring ........................................................ Steel
Body .............................................................................................Zinc
Bonnet, Seat, Piston & Valve Poppet ................................... Plastic
*Tighten panel mount nut 2.8 to 3.4 Nm (25 to 30 in-lbs) of torque. Seals ......................................................................................... Nitrile
PU
SH
K
C
TO L O
C
and tamper resistance.
• Easily serviced.
• Reverse Flow. 1/4" NPT
Gauge Ports C
Selection
(2)
E
3/8" – 40 SCFM §
s
D
m
Filters
t it e
u
Port Size NPT 05R Regulator
Coalescers
o
Without Gauge Dimensions
d t e
1/4" 05R113A* A B C
e e
2.00 2.06 3.16
y l
3/8" 05R213A*
a
(51) (52) (80)
Gr e obs o
Regulators
ar
Standard part numbers shown bold. For other models refer to
Regulators
Ordering Information
05R 1 13 A D — — ---
Combos
Accessories
Port Size Pressure Range Relief Engineering Port Type Options Preset /
1 1/4 Inch A Relieving Level Blank No Options Pressure
Without Gauge Blank NPT
1* BSPP Limited
2 3/8 Inch 10 30 psig L Non-Relieving D Current L† Preset
11 60 psig H Low Temp. 2 BSPT Non-Adjustable Blank None
13 125 psig Relieving P† Preset XXX* Preset
* 1/4 & 3/8 inch
14 200 psig J Low Temp. meet ISO 1179-1 Adjustable Pressure
With Gauge** Non-Relieving Standard. S† Pressure XXX* Pressure
Limiter Max. Limited
17 30 psig
Adjustable * Available Preset /
16 60 psig
T† Pressure Pressure Limited
18 125 psig Range, 10 to 90
Limiter Max.
19 200 psig psig in 5 psig
Non- Adjustable increments. For
** Includes 1-1/2"
Dial Face Gauge higher pressures,
† Inlet Pressure is 100 psig.
contact factory.
Spring Type by Preset / Limited Pressure: For other pressures,
contact factory. (Example:
For Preset / Limited Pressure 10 to 25 use 30 PSI Spring
065 = 65 psig)
For Preset / Limited Pressure 26 to 50 use 60 PSI Spring
For Preset / Limited Pressure 51 to 90 use 125 PSI Spring BOLD ITEMS ARE MOST POPULAR.
Technical Information
6 90 6 90
75 75
C
5 5
4 60 4 60
3 45 3 45
2 30 2 30
Selection
Product
1 15 1/4 Inch Ports 1 15 3/8 Inch Ports
Primary Pressure 100 PSIG (6.9 bar) Primary Pressure 100 PSIG (6.9 bar)
0 0 0 0
10 0 10 20 30 40 50 60 70 80 10 0 10 20 30 40 50 60 70 80
Flow (SCFM) Flow (SCFM)
m s
5 0 5 10 15 20 25 30 35 5 0 5 10 15 20 25 30 35
Filters
3 3
e
Flow - dm /s Flow - dm /s
t
n n
ut i
Coalescers
o
CAUTION:
d e
! WARNING
e t
REGULATOR PRESSURE ADJUSTMENT – The working
y e
Product rupture can cause serious injury.
l
range of knob adjustment is designed to permit outlet
a o
pressures within their full range. Pressure adjustment Do not connect regulator to bottled gas.
Gr e obs
Regulators
beyond this range is also possible because the knob is not Do not exceed maximum primary pressure rating.
a limiting device. This is a common characteristic of most
industrial regulators, and limiting devices may be obtained
ar
only by special design.
Regulators
Filter /
For best performance, regulated pressure should always
be set by increasing the pressure up to the desired setting.
Lubricators
Combos
05R Regulator Kits & Accessories Specifications
Bonnet Assembly Kit ........................................................... PS915P Gauge Ports (2) .................................................................... 1/4 Inch
Control Knob .........................................................................P04420 Port Threads ..................................................................1/4, 3/8 Inch
Gauges – 1-1/2" Dial Face Primary Pressure Rating –
Accessories
30 psig (0 to 2.1 bar).................................... K4515N14030 Maximum Primary Pressure..................... 300 psig (17.2 bar) Max.
60 psig (0 to 4.1 bar).................................... K4515N14060 For Secondary Pressure Ranges see above charts.
160 psig (0 to 11.0 bar)................................ K4515N14160 Temperature Rating .............................. 32°F to 175°F (0°C to 80°C)
300 psig (0 to 20.0 bar)................................ K4515N14300 Low Temperature..............................-4°F to 125°F (-20°C to 52°C)
2" Dial Face Weight ....................................................................... 1.1 lb. (0.49 kg)
60 psig (0 to 4.1 bar).................................... K4520N14060
160 psig (0 to 11.0 bar)................................ K4520N14160
300 psig (0 to 20.0 bar)................................ K4520N14300
Materials of Construction
Mounting Bracket Kit ...........................................................PS963P
Adjusting Stem . .......................................................................Brass
Panel Mount Nut – Metal . ....................................................PS964P
Bonnet...................................................................................... Plastic
Springs – 1-30 psig Range......................................................P04427
Body............................................................................................. Zinc
1-60 psig Range.....................................................P04426
2-125 psig Range....................................................P04425 Collar, Knob ............................................................................ Plastic
2-200 psig...............................................................P02934 Diaphragm .................................................................................Nitrile
Service Kit – Relieving .........................................................PS908P Poppet & Cap .......................................................................... Plastic
Non-Relieving.................................................PS909P Seals ..........................................................................................Nitrile
Springs – Poppet & Control........................................................ Steel
PU
CK
H T LO
S
O
C additional outlets.
• Easily serviced. 1/4" NPT
Gauge Ports C
• Removable non-rising knob for panel mounting (2)
E
Selection
1/4" 06R113AC A B C
2.81 2.74 4.69
3/8" 06R213AC (71) (70) (119)
1/2" 06R313AC D E
With 160 PSI Gauge 1.39 6.08
Regulators
(35) (154)
1/4" 06R118AC
Inches (mm)
3/8" 06R218AC
1/2" 06R318AC
WARNING
Regulators
!
Filter /
Ordering Information
06R 1 13 A C — — ---
Combos
Accessories
Port Size Pressure Range Relief Engineering Port Type Options Preset /
1 1/4 Inch Without Gauge A Relieving Level Blank NPT Blank No Options Pressure
1* BSPP Limited
2 3/8 Inch 11 60 psig L Non-Relieving C Current L† Preset
3 1/2 Inch 13 125 psig * 1/4 & 3/8 inch Non-Adjustable Blank None
15 250 psig meet ISO 1179-1 P† Preset XXX* Preset
With Gauge**
Standard. Adjustable Pressure
16 60 psig R Reverse Flow * Available Preset /
Pressure Limited
18 125 psig † Inlet Pressure is 100 psig. Range, 10 to 90
21 250 psig For other pressures, contact psig in 5 psig
factory. increments. For
** Includes 1-1/2"
higher pressures,
Dial Face Gauge
contact factory.
(Example:
065 = 65 psig)
Technical Information
Relief And Flow Characteristics Relief And Flow Characteristics
06R113A* 06R213A*
100 100
Secondary Pressure - PSIG
4 60 4 60
C
3 3
40 40
2 2
20 20
1 1
1/4 Inch Ports 3/8 Inch Ports
Selection
100 PSIG (6.9 bar) Primary Pressure 100 PSIG (6.9 bar) Primary Pressure
Product
0 0 0 0
10 0 10 20 30 40 50 60 70 10 0 10 20 30 40 50 60 70
Rated Flow - SCFM Rated Flow - SCFM
5 0 5 10 15 20 25 30 5 0 5 10 15 20 25 30
3 3
Flow - dm /s Flow - dm /s
n n
Filters
Relief And Flow Characteristics
06R313A*
Coalescers
100
CAUTION:
Secondary Pressure - PSIG
6
Secondary Pressure - bar
Regulators
4 60
Pressure adjustment beyond this range is also
possible because the knob is not a limiting device. 3
40
This is a common characteristic of most industrial
2
regulators, and limiting devices may be obtained
Regulators
20
only by special design.
Filter /
1
1/2 Inch Ports
For best performance, regulated pressure should 100 PSIG (6.9 bar) Primary Pressure
0 0
always be set by increasing the pressure up to the 10 0 10 20 30 40 50 60 70 80 90
desired setting. Rated Flow - SCFM
Lubricators
5 0 5 10 15 20 25 30 35 40
3
Flow - dm /s
n
Combos
(Can be used as additional High Flow 1/4 Inch Outlet Ports)
Control Knob ...................................................................... P04069B
Port Threads ...........................................................1/4, 3/8, 1/2 Inch
Gauges – 2" Dial Face
Primary Pressure Rating –
60 psig (0 to 4.1 bar)................................... K4520N14060
Maximum Primary Pressure.............................. 250 psig (17.2 bar)
Accessories
160 psig (0 to 11.0 bar)................................K4520N14160
300 psig (0 to 20.0 bar)............................... K4520N14300 Secondary Pressure Ranges –
Standard Pressure.................................2 to 125 psig (0 to 8.6 bar)
1-3/4" Digital Round Face Low Pressure........................................... 1 to 60 psig (0 to 4.1 bar)
160 psig (0 to 11.0 bar)............................. K4517N14160D High Pressure................................... 5 to 250 psig (0.4 to 17.2 bar)
Mounting Bracket Kit (Includes Panel Mount Nut).............. PS707P Temperature Rating .............................. 32°F to 175°F (0°C to 80°C)
Panel Mount Nut – Plastic......................................................P04082 Low Temperature..............................-4°F to 125°F (-20°C to 52°C)
Metal..................................................... P04079B Weight.......................................................................... 1.6 lb. (0.7 kg)
Reverse Flow Service Conversion Kit – Materials of Construction
Relieving .......................................................................... PS708RP
Adjusting Stem . ........................................................................ Steel
Service Kit – Relieving (Includes Poppet)............................. PS708P Body ............................................................................................. Zinc
Non-Relieving (Includes Poppet).................... PS709P
Bonnet, Piston Stem, Valve Poppet & Cap ......................... Plastic
Springs – 1-30 psig Range....................................................P01698
Collar, Knob............................................................................. Plastic
1-60 psig Range....................................................P04062
2-125 psig Range...................................................P04063 Diaphragm .................................................................................Nitrile
5-250 psig Range..................................................P04064 Seals ..........................................................................................Nitrile
Tamperproof Kit.................................................................... PS737P Springs – Poppet................................................................ Stainless
Control....................................................................... Steel
PU
CK
H T LO
S
O
C additional outlets.
• Easily serviced. 1/4" NPT
Gauge Ports
C
• Removable non-rising knob for panel mounting (2)
E
Selection
1/2" 07R313AC A B C
3.24 2.74 4.79
3/4" 07R413AC (82) (70) (122)
With 160 PSI Gauge
D E
1/2" 07R318AC 1.61 6.40
Regulators
(41) (163)
3/4" 07R418AC
Inches (mm)
Standard part numbers shown bold. For other models refer to
ordering information below.
WARNING
Regulators
§ SCFM = Standard cubic feet per minute at 100 psig inlet, Product rupture can cause serious injury.
90 psig no flow secondary setting and 10 psig pressure drop. Do not connect regulator to bottled gas.
Do not exceed maximum primary pressure rating.
Lubricators
Ordering Information
07R 3 13 A C — — ---
Combos
Accessories
Port Size Pressure Range Relief Engineering Port Type Options Preset /
3 1/2 Inch Without Gauge A Relieving Level Blank NPT Blank No Options Pressure
1* BSPP Limited
4 3/4 Inch 11 60 psig L Non-Relieving C Current L† Preset
13 125 psig * 1/2 inch meets Non-Adjustable Blank None
15 250 psig ISO 1179-1 P† Preset XXX* Preset
With Gauge**
Standard. Adjustable Pressure
16 60 psig R Reverse Flow * Available Preset /
Pressure Limited
18 125 psig † Inlet Pressure is 100 psig.
Range, 10 to 90
21 250 psig For other pressures, contact
psig in 5 psig
factory.
** Includes 1-1/2" increments. For
Dial Face Gauge higher pressures,
contact factory.
(Example:
065 = 65 psig)
Technical Information
80 80
5 5
60 4 60
4
2
40
3
2
40
C
20 20
1 1 3/4 Inch Ports
1/2 Inch Ports
Selection
Product
100 PSIG (6.9 bar) Primary Pressure 100 PSIG (6.9 bar) Primary Pressure
0 0 0 0
10 0 10 30 50 70 90 110 130 10 0 10 30 50 70 90 110 130 150 170
Rated Flow - SCFM Rated Flow - SCFM
5 0 5 15 25 35 45 55 5 0 5 15 25 35 45 55 65 75
3 3
Flow - dm /s Flow - dm /s
n n
Filters
Coalescers
CAUTION:
REGULATOR PRESSURE ADJUSTMENT –
The working range of knob adjustment is
designed to permit outlet pressures within their
Regulators
full range. Pressure adjustment beyond this range
is also possible because the knob is not a limiting
device. This is a common characteristic of most
industrial regulators, and limiting devices may be
Regulators
obtained only by special design.
Filter /
For best performance, regulated pressure should
always be set by increasing the pressure up to
the desired setting.
Lubricators
07R Regulator Kits & Accessories Specifications
Bonnet Assembly Kit .......................................................... PS715P Gauge Ports (2) .................................................................... 1/4 Inch
Combos
(Can be used as additional High Flow 1/4 Inch Outlet Ports)
Control Knob ...................................................................... P04069B
Port Threads ..................................................................1/2, 3/4 Inch
Gauges – 2" Dial Face
Primary Pressure Rating –
60 psig (0 to 4.1 bar)................................... K4520N14060
Maximum Primary Pressure............................... 250 psig (17.2 bar)
160 psig (0 to 11.0 bar)................................K4520N14160
Accessories
300 psig (0 to 20.0 bar)............................... K4520N14300 Secondary Pressure Ranges –
Standard Pressure.................................2 to 125 psig (0 to 8.6 bar)
1-3/4" Digital Round Face Low Pressure............................................ 1 to 60 psig (0 to 4.1 bar)
160 psig (0 to 11.0 bar)............................. K4517N14160D High Pressure.................................... 5 to 250 psig (0.4 to 17.2 bar)
Mounting Bracket Kit (Includes Panel Mount Nut)............... PS807P Temperature Rating .............................. 32°F to 175°F (0°C to 80°C)
Panel Mount Nut – Plastic.....................................................P04082 Low Temperature...............................-4°F to 125°F (-20°C to 52°C)
Metal.................................................... P04079B Weight...........................................................................2.5 lb. (1.1 kg)
Reverse Flow Service Conversion Kit – Materials of Construction
Relieving.......................................................................... PS808RP
Adjusting Stem . ....................................................................... Steel
Service Kit – Relieving (Includes Poppet)............................PS808P Body............................................................................................. Zinc
Non-Relieving (Includes Poppet)....................PS809P
Bonnet, Piston Stem, Valve Poppet & Cap ......................... Plastic
Springs – 1-30 psig Range.....................................................P01698 Collar, Knob............................................................................. Plastic
1-60 psig Range.....................................................P04062
2-125 psig Range...................................................P04063 Diaphragm .................................................................................Nitrile
5-250 psig Range...................................................P04064 Seals ..........................................................................................Nitrile
Tamperproof Kit ................................................................... PS737P Springs – Poppet................................................................ Stainless
Control....................................................................... Steel
PU
CK
H T LO
S
O
C
pressure regulation.
• Solid control piston for extended life.
1/4" NPT
• High Flow: 3/4" – 200 SCFM § Gauge Ports C
E
1" – 300 SCFM § (2)
Selection
Product
m s
Filters
it e
Port Size NPT P3NR Regulator
t
Without Gauge Dimensions
u
Coalescers
A A (PB) B
o
3/4" P3NRA96BNN
3.62 5.91 3.62
d e
1" P3NRA98BNN
t
(92) (150) (92)
ye e
1-1/2" P3NRA9PBNN
l
C D E
a o
With 160 PSI Gauge 6.38 2.08 8.46
Gr e obs
Regulators
ar
WARNING
Regulators
Ordering Information
Combos
P3N R a 9 8 b N N
Accessories
Note: BSPP ported units supplied using NPT ported bodies and BSPP port block kits.
BOLD ITEMS ARE MOST POPULAR.
Technical Information
5 75 75
5
3
60
45
4
3
60
45
C
2 30 2 30
Selection
Product
1 15 1 15
0 0 0 0
-100 0 100 200 300 400 500 600 -100 0 100 200 300 400 500 600 700
Flow - SCFM Flow - SCFM
-50 0 50 100 150 200 250 -50 0 50 100 150 200 250 300
3 3
Flow - dm /s
Filters
Flow - dm /s n
n
Coalescers
P3NR
120
CAUTION: 8
1-1/2 Inch Ports
105
REGULATOR PRESSURE ADJUSTMENT – 7 Primary Pressure 100 PSIG (6.9 bar)
Pressure Drop - PSIG
Pressure Drop - bar
Regulators
75
5
full range. Pressure adjustment beyond this range
60
is also possible because the knob is not a limiting 4
Regulators
2 30
obtained only by special design.
Filter /
1 15
For best performance, regulated pressure should
0 0
always be set by increasing the pressure up to -100 0 100 200 300 400 500 600 700
Flow - SCFM
the desired setting.
Lubricators
-50 0 50 100 150 200 250 300
3
Flow - dm /s
n
Combos
Control Knob................................................................. P3NKA00PN Gauge Ports (2) .................................................................... 1/4 Inch
Gauges – 2" Dial Face (Can be used as additional High Flow 1/4 Inch Outlet Ports)
60 psig (0 to 4.1 bar)................................... K4520N14060 Port Threads ........................................................... 3/4, 1, 1-1/2 Inch
160 psig (0 to 11.0 bar)............................... K4520N14160
Accessories
Primary Pressure Rating –
300 psig (0 to 20.0 bar)............................... K4520N14300 Maximum Primary Pressure.............................. 250 psig (17.2 bar)
1-3/4" Digital Round Face Temperature Rating .............................. 32°F to 175°F (0°C to 80°C)
160 psig (0 70 11.0 bar)............................K4517N14160D Weight – 3/4"................................................................ 4.2 lb. (1.9 kg)
Mounting Bracket Kit* .................................................P3NKA00MW 1"................................................................... 4.2 lb. (1.9 kg)
Service Kit – Relieving..................................................P3NKA00RR 1-1/2" † . ........................................................ 5.3 lb. (2.4 kg)
Non-Relieving..........................................P3NKA00RN Materials of Construction
Springs – 1-60 psig Range................................................. C10A1304 Adjusting Stem . ........................................................................ Steel
2-125 psig Range............................................... C10A1308
Body.................................................................................... Aluminum
5-250 psig Range............................................... C10A1317
Bonnet ................................................................................ Aluminum
Knob ........................................................................................ Plastic
Piston ....................................................................................... Plastic
Poppet Assembly .....................................................................Brass
Seals...........................................................................................Nitrile
Springs – Poppet & Control....................................................... Steel
* If 1-1/2 BSPP E02 fittings are required, use P3NKA0BMW. † 1" Port Body with 1-1/2" Port Block.
C
A
• Diaphragm Operated Design with
Balanced Poppet Design for Quick
and Accurate Regulation
• Secondary Aspiration Plus Balanced
Selection
Product
R119-04C
R119-04C R119G04C
Filter /
1/2"
3.56 1.56 5.34 3.25 6.90 1.45
With Gauge 0-125 PSIG Reduced Pressure (90) (40) (136) (83) (175) (37)
1/4" R119-02CG/M2 — inches (mm)
R119-03CG/M2
Lubricators
3/8" —
1/2" R119-04CG/M2 —
Standard part numbers shown bold.
For other models refer to ordering information below.
§ SCFM = Standard cubic feet per minute at 100 PSIG inlet, 75 PSIG no
Combos
Ordering Information
Accessories
R 119 — 02 C /M2
Technical Information
Flow Characteristics Flow Characteristics
R119-02C R119-03C
100 100
6 1/4 Inch Ports 6 3/8 Inch Ports
Secondary Pressure - PSIG
4 60 4
50
3 3
40
2
1
20
2
1
25
C
0 0 0 0
Selection
0 20 40 60 80 100 120 0 25 50 75 100 125 150
Product
Flow - SCFM Flow - SCFM
0 10 20 30 40 50 0 10 20 30 40 50 60 70
Flow - dmn3/s Flow - dmn3/s
Flow Characteristics
R119-04C
Filters
100
6 1/2 Inch Ports ! WARNING
Secondary Pressure - PSIG
Secondary Pressure - bar
Coalescers
4 Do not exceed maximum primary pressure rating.
50
3
2
! CAUTION:
25 REGULATOR PRESSURE ADJUSTMENT – The working range
Regulators
1 of knob adjustment is designed to permit outlet pressures within
their full range. Pressure adjustment beyond this range is also
0 0 possible because the knob is not a limiting device. This is a
0 25 50 75 100 125 150 175 200
common characteristic of most industrial regulators, and limiting
Flow - SCFM
devices may be obtained only by special design.
Regulators
0 10 20 30 40 50 60 70 80 90
For best performance, regulated pressure should always be set
Filter /
Flow - dmn3/s by increasing the pressure up to the desired setting.
Lubricators
Relieving Diaphragm,
Valve Assembly (1/2"; 250 PSIG) . ...............................RK119A250
Gauges – 2" Dial Face
60 psig (0 to 4.1 bar)................................... K4520N14060 Spring Cage & T-Handle Kit (1/4 & 3/8)........................... RKC119Y
160 psig (0 to 11.0 bar)................................K4520N14160 Spring Cage & Insert Only Kit (1/2)............................SAC18A3/BK
300 psig (0 to 20.0 bar)............................... K4520N14300 For Fluorocarbon Repair Kits, add X64 to Kit Number suffix.
Combos
1-3/4" Digital Round Face
160 psig (0 to 11.0 bar)............................. K4517N14160D Specifications
Mounting Bracket Kit – Gauge Ports (2)..................................................................... 1/4 Inch
1/4", 3/8".............................................................................SA15Y57 Port Threads............................................................1/4, 3/8, 1/2 Inch
Accessories
1/2"......................................................................................... 18A57
Reduced Pressure Range................ 2 to 125 PSIG (0.15 to 8.5 bar)
Panel Mount Conversion Kit –
1/4", 3/8" ................................................................................. 4202 Supply Pressure .............................. 300 PSIG Maximum (20.4 bar)
1/2".......................................................................................... 4204 Temperature Rating........................... 40°F to 125°F (4.4°C to 52°C)
Repair Kits – Weight –
Non-Relieving Diaphragm, R119-02, R119-03......................................... 1.8 lb. (0.82 kg) / Unit
Valve Assembly (1/4", 3/8"; All PSIG) ................................RK118Y 26 lb. (11.79 kg) / 12-Unit Master Pack
Relieving Diaphragm, R119-04......................................................... 3.2 lb. (1.45 kg) / Unit
Valve Assembly (1/4", 3/8"; All PSIG) ................................RK119Y 27 lb. (12.25 kg) / 8-Unit Master Pack
Non-Relieving Diaphragm,
Valve Assembly (1/2"; 25, 60, 125 PSIG)............................RK118A
Materials of Construction
Adjusting Screw, Springs......................................................... Steel
Non-Relieving Diaphragm,
Valve Assembly (1/2"; 250 PSIG) . .............................. RK118A250 Body, Spring Cage.......................................................................Zinc
Relieving Diaphragm, Bottom Plug............................................................................... Nylon
Valve Assembly (1/2"; 25, 60, 125 PSIG)............................RK119A Innervalve.................................................................................. Brass
Seals........................................................................................ Buna N
demanding applications.
A
• Ideal for those installations calling for X80 Reverse Flow
Option
C
constant pressure with wide variation
in flow.
• Diaphragm operated design with
balanced poppet design for quick and
Selection
Product
accurate regulation.
• Secondary aspiration plus balanced
poppet provides quick response and
C
accurate pressure regulation. 1/4" NPT
Filters
Gauge Ports E
• Heavy duty tee handle adjustment. (2)
NPT
Port Size R119-06C, R119-08C Regulator Dimensions
Relieving
A B C D E N
Without Gauge 0-125 psig Reduced Pressure 4.69 1.87 8.15 4.38 10.02 1.61
3/4" R119-06C/M2 (119) (47) (207) (111) (255) (41)
Regulators
Filter /
§ SCFM = Standard Cubic Feet Per Minute at 100 psig Inlet, 75 psig No Flow
Secondary Setting, and 20 psig Pressure Drop.
Ordering Information
R 119 — 06 C G /M2
Technical Information
Flow Characteristics Flow Characteristics
R119-06C R119-08C
100 100
6 3/4 Inch Ports 6 1 Inch Ports
4 4
50 50
3 3
2 2
25
C
25
1 1
0 0 0 0
0 50 100 150 200 250 300 350 0 50 100 150 200 250 300 350 400
Flow - SCFM Flow - SCFM
0 20 40 60 80 100 120 140 160 0 20 40 60 80 100 120 140 160 180
Selection
Product
Flow - dmn3/s Flow - dmn3/s
Filters
Secondary Pressure - PSIG
4 4
Coalescers
50 50
3 3
2 2
25 25
1 1
Regulators
0 0 0 0
0 100 200 300 400 500 0 100 200 300 400 500
Flow - SCFM Flow - SCFM
0 40 80 120 160 200 240 0 40 80 120 160 200 240
Flow - dmn3/s Flow - dmn3/s
Regulators
CAUTION:
Filter /
REGULATOR PRESSURE ADJUSTMENT –
The working range of knob adjustment is designed to permit outlet pressures within their
full range. Pressure adjustment beyond this range is also possible because the knob is not
Lubricators
a limiting device. This is a common characteristic of most industrial regulators, and limiting
devices may be obtained only by special design.
For best performance, regulated pressure should always be set by increasing the pressure
up to the desired setting.
Combos
R119 Regulator Kits & Accessories Specifications
Gauges – 2" Dial Face Gauge Ports (2) . ....................................................................1/4 Inch
Accessories
60 psig (0 to 4.1 bar)................................... K4520N14060 Port Threads .................................................. 3/4, 1, 1-1/4, 1-1/2 Inch
160 psig (0 to 11.0 bar)................................K4520N14160
300 psig (0 to 20.0 bar)............................... K4520N14300 Reduced Pressure Range ................ 2 to 125 psig (0.15 to 8.5 bar)
1-3/4" Digital Round Face Supply Pressure ................................. 300 psig Maximum (20.4 bar)
160 psig (0 to 11.0 bar)............................. K4517N14160D Temperature Rating .......................... 40°F to 125°F (4.4°C to 52°C)
Mounting Bracket Kit .............................................................. 18B57 Weight –
Repair Kits – R119-06, R119-08 ........................................ 6.2 lb. (2.81 kg) / Unit
Non-Relieving Diaphragm, 25 lb. (11.34 kg) / 4-Unit Master Pack
Valve Assembly (3/4", 1") ................................................... RK118B R119-10, R119-12 ........................................ 7.2 lb. (3.27 kg) / Unit
Non-Relieving Diaphragm, 29 lb. (13.15 kg) / 4-Unit Master Pack
Valve Assembly (1-1/4", 1-1/2") .......................................... RK118D
Materials of Construction
Relieving Diaphragm,
Valve Assembly (3/4", 1") ................................................... RK119B Adjusting Screw, Springs ......................................................... Steel
D
Coalescers
Without Gauge
2" 09R813BA A B C
5.30 3.60 9.10
Standard part numbers shown bold. For other models refer to (135) (91) (231)
ordering information below.
Regulators
90 psig no flow secondary setting and 10 psig pressure drop. 2.80 11.90
(71) (302)
Inches (mm)
Lubricators
Ordering Information
Combos
09R 8 13 B A
Accessories
Technical Information
60
C
4
3
40
Selection
20
Product
1
0 0
0 200 400 600 800 1000 1200
Rated Flow - SCFM
Filters
0 100 200 300 400 500
3
Flow - dm /s
n
Coalescers
CAUTION: ! WARNING
REGULATOR PRESSURE ADJUSTMENT – The working
range of knob adjustment is designed to permit outlet Product rupture can cause serious injury.
pressures within their full range. Pressure adjustment Do not connect regulator to bottled gas.
Regulators
beyond this range is also possible because the knob is not Do not exceed maximum primary pressure rating.
a limiting device. This is a common characteristic of most
industrial regulators, and limiting devices may be obtained
only by special design.
Regulators
Filter /
For best performance, regulated pressure should always
be set by increasing the pressure up to the desired setting.
Lubricators
Combos
09R Regulator Kits & Accessories Specifications
Body Service Kit ...................................................................PS603P Gauge Ports (2) .................................................................... 1/4 Inch
Gauges – 2" Dial Face (Can be used as additional Full Flow 1/4 Inch Outlet Ports)
Accessories
160 psig (0 to 11.0 bar)................................K4520N14160 Port Threads ............................................................................ 2 Inch
300 psig (0 to 20.0 bar)............................... K4520N14300 Primary Pressure Rating –
1-3/4" Digital Round Face Maximum Primary Pressure.............................. 300 psig (17.2 bar)
160 psig (0 to 11.0 bar)............................. K4517N14160D Secondary Pressure Range – .......... 10 to 125 psig (0.7 to 8.6 bar)
Mounting Bracket Kit............................................................PS605P 10 to 180 psig (0.7 to 12.4 bar)
Service Kit – Non-Relieving..................................................PS604P Temperature Rating ..............................32°F to 150°F (0°C to 66°C)
Relieving..........................................................PS626P Weight....................................................................... 10.82 lb. (53 kg)
Springs – 0 to 125 psig Range..............................................PS602P
0 to 180 psig Range................................................ PS627
Materials of Construction
Adjusting Stem & Springs ....................................................... Steel
Body.....................................................................Zinc Alloy, Die Cast
Bonnet, Piston Stem, Valve Poppet & Cap..................... Aluminum
Piston, Cap .............................................................................. Plastic
Seals...........................................................................................Nitrile
C
1/8" NPT
• Easily serviced.
1/4" NPT
• High Flow: 1/4" – 50 SCFM § Gauge Ports
3/8" – 50 SCFM § (2)
C
Selection
Product
D
Filters
1/4" 10R115PB A B C
2.00 2.06 2.43
3/8" 10R215PB (51) (52) (62)
With 160 PSI Gauge
D E
Regulators
Ordering Information
Combos
10R 1 15 P B — —
Accessories
Technical Information
Relief And Flow Characteristics
10R115P*
8 120
6 90
5 75
4 60
C
3 45
2 30
1/4 Inch Ports
1 15 Primary Pressure 100 PSIG (6.9 bar)
Selection
Product
0 0
10 0 10 20 30 40 50 60 70
Flow (SCFM)
5 0 5 10 15 20 25 30
3
Flow - dm /s
n
Filters
Relief And Flow Characteristics
10R215P*
8 120
Coalescers
Secondary Pressure (PSIG)
105
Secondary Pressure (bar)
6 90
5 75
Regulators
4 60
3 45
2 30
3/8 Inch Ports
1 15
Regulators
Primary Pressure 100 PSIG (6.9 bar)
Filter /
0 0
10 0 10 20 30 40 50 60 70
Flow (SCFM)
5 0 5 10 15 20 25 30
3
Lubricators
Flow - dm /s
n
Combos
10R Pilot Regulator Kits & Accessories Specifications
Gauges – 1-1/2" Dial Face Gauge Ports (2) .................................................................... 1/4 Inch
30 psig (0 to 2.1 bar)....................................K4515N14030 Port Threads ..................................................................1/4, 3/8 Inch
60 psig (0 to 4.1 bar)....................................K4515N14060
Accessories
Pressure & Temperature Rating – . ..... 0 to 250 psig (0 to 17.2 bar)
160 psig (0 to 11.0 bar)................................ K4515N14160
32°F to 175°F (0°C to 80°C)
300 psig (0 to 20.0 bar)................................K4515N14300
Weight...................................................................... 0.90 lb. (0.41 kg)
2" Dial Face
60 psig (0 to 4.1 bar)................................... K4520N14060
160 psig (0 to 11.0 bar)................................K4520N14160
300 psig (0 to 20.0 bar)............................... K4520N14300 Materials of Construction
Mounting Bracket Kit............................................................PS963P Body ............................................................................................. Zinc
Panel Mount Nut – Metal......................................................PS964P Piston & Poppet ...................................................................... Plastic
Pilot Conversion Kit ............................................................PS945P Seals ..........................................................................................Nitrile
Service Kits – Relieving....................................................PS94900P Spring – Poppet.......................................................................... Steel
Non-Relieving ........................................... PS94700P
C
location.
• Solid control piston for extended life. 1/4" NPT
Gauge Ports
• Two full flow 1/4" gauge ports can be used as (2)
additional outlets.
Selection
C
Product
E
• Pilot port 1/4 Inch.
• High Flow: 1/4" – 85 SCFM §
D
3/8" – 95 SCFM §
1/2" – 95 SCFM §
Filters
1/4" 11R115PB A B C
2.81 2.74 3.05
3/8" 11R215PB (71) (70) (77)
1/2" 11R315PB D E
Regulators
§ SCFM = Standard cubic feet per minute at 100 psig inlet, Do not connect regulator to bottled gas.
90 psig no flow secondary setting and 10 psig pressure drop. Do not exceed maximum primary pressure rating.
Ordering Information
Combos
Accessories
11R 2 15 P C —
Technical Information
100
C
Secondary Pressure - bar
5
80
5
4 60
4 60
3
40
Selection
Product
3
40 2
2 20
1 3/8 Inch Ports
20
100 PSIG (6.9 bar) Primary Pressure
1 1/2 Inch Ports 0 0
100 PSIG (6.9 bar) Primary Pressure 20 0 20 40 60 80 100 120 140
Filters
0 0 Rated Flow - SCFM
20 0 20 40 60 80 100 120 140
Rated Flow - SCFM 10 0 10 20 30 40 50 60
3
10 0 10 20 30 40 50 60
Flow - dm /s
n
3
Flow - dm /s
Coalescers
n
Regulators
Regulators
Filter /
Lubricators
Combos
Accessories
11R Pilot Regulator Kits & Accessories Specifications
Body Service Kits – Seat Insert Kit...................................... PS713P Gauge Ports (2) .....................................................................1/4 Inch
(Can be used as additional Full Flow 1/4 Inch Outlet Ports)
Gauges – 2" Dial Face
60 psig (0 to 4.1 bar)................................... K4520N14060 Port Threads . ......................................................... 1/4, 3/8, 1/2 Inch
160 psig (0 to 11.0 bar)................................K4520N14160 Pressure & Temperature Rating –........ 0 to 250 psig (0 to 17.2 bar)
300 psig (0 to 20.0 bar)............................... K4520N14300 32°F to 175°F (0°C to 80°C)
1-3/4" Digital Round Face Weight........................................................................1.3 lb. (0.58 kg.)
160 psig (0 to 11.0 bar)............................. K4517N14160D
Mounting Bracket Kit (Includes Panel Mount Nut)............... PS707P
Panel Mount Nut – Plastic.....................................................P04082 Materials of Construction
Metal.................................................... P04079B Body & Pilot Cap......................................................................... Zinc
Pilot Conversion Kit – Relieving.......................................... PS745P Piston, Valve Poppet, & Collar .............................................. Plastic
Service Kits – Non-Relieving............................................... PS747P Seals...........................................................................................Nitrile
Relieving....................................................... PS749P
Springs ....................................................................................... Steel
C
location.
1/4" NPT
• Solid control piston for extended life. Gauge Ports
• Two full flow 1/4" gauge ports can be used as (2)
C
additional outlets.
Selection
Product
E
• Pilot port 1/4 Inch.
• High Flow: 1/2" – 140 SCFM § D
3/4" – 140 SCFM §
Filters
1/2" 12R315PB A B C
3.24 2.74 3.15
3/4" 12R415PB (82) (70) (80)
With 160 PSI Gauge
D E
Regulators
Ordering Information
Combos
12R 2 15 P B —
Accessories
Relief / Engineering
Port Size Adjustment Port Type
Gauge Options Level
3 1/2 Inch P Pilot Operated Blank NPT
Without Gauge B Current
4 3/4 Inch 1 BSPP
14 Non-Relieving Piston 2 BSPT
15 Relieving Piston
*With Gauge
19 Non-Relieving Piston
21 Relieving Piston
* Includes 2" Dial Face Gauge
0 to 300 psig
Technical Information
3
60
C
40
Selection
Product
20
1 1/2 Inch Ports
100 PSIG (6.9 bar) Primary Pressure
0 0
20 0 20 40 60 80 100 120 140 160 180 200 220
Rated Flow - SCFM
Filters
10 0 10 20 30 40 50 60 70 80 90 100
3
Flow - dm /s
n
Coalescers
Regulators
Regulators
Filter /
Lubricators
Combos
Accessories
12R Pilot Regulator Kits & Accessories Specifications
Body Service Kits – Seat Insert Kit...................................... PS813P Gauge Ports (2) .................................................................... 1/4 Inch
Gauges – 2" Dial Face (Can be used as additional Full Flow 1/4 Inch Outlet Ports)
60 psig (0 to 4.1 bar)................................... K4520N14060 Port Threads...................................................................1/2, 3/4 Inch
160 psig (0 to 11.0 bar)................................K4520N14160 Pressure & Temperature Rating –........ 0 to 250 psig (0 to 17.2 bar)
300 psig (0 to 20.0 bar)............................... K4520N14300 32°F to 175°F (0°C to 80°C)
1-3/4" Digital Round Face Weight ........................................................................ 2.0 lb. (0.91 kg)
160 psig (0 to 11.0 bar)............................. K4517N14160D
Mounting Bracket Kit (Includes Panel Mount Nut)............... PS807P
Panel Mount Nut – Plastic......................................................P04082 Materials of Construction
Metal..................................................... P04079B
Body & Pilot Cap......................................................................... Zinc
Pilot Conversion Kit – Relieving.......................................... PS745P
Piston, Valve Poppet, & Collar .............................................. Plastic
Service Kits – Non-Relieving................................................ PS847P
Relieving........................................................PS849P Seals...........................................................................................Nitrile
Springs........................................................................................ Steel
C
pressure regulation.
• Solid control piston for extended life. 1/4" NPT
(2)
1-1/2" – 350 SCFM § C
E
D
m s
Filters
it e
Port Size NPT P3NR Pilot Regulator
t
Without Gauge Dimensions
u
Coalescers
A A (PB) B
o
3/4" P3NRA96BPP
3.62 5.91 3.62
d e
1" P3NRA98BPP
t
(92) (150) (92)
e e
1-1/2" #
y
P3NRA9PBPP
l
C D E
a o
With 160 PSI Gauge 3.38 2.08 5.46
Gr e obs
Regulators
ar
WARNING
Regulators
!
Filter /
Ordering Information
Combos
P3N R a 9 8 b P P
Accessories
Note: BSPP ported units supplied using NPT ported bodies and BSPP port block kits.
Technical Information
Relief And Flow Characteristics Relief And Flow Characteristics
P3NR P3NR
120 120
8 8
3/4 Inch Ports 1 Inch Ports
105 105
7 Primary Pressure 100 PSIG (6.9 bar) 7 Primary Pressure 100 PSIG (6.9 bar)
90 6 90
6
75 75
5 5
4 60 4 60
C
3 45 3 45
2 30 2 30
1 15 1 15
Selection
0 0 0 0
Product
-100 0 100 200 300 400 500 600 -100 0 100 200 300 400 500 600 700
Flow - SCFM Flow - SCFM
-50 0 50 100 150 200 250 -50 0 50 100 150 200 250 300
3 3
Flow - dm /s Flow - dm /s
n n
Filters
Relief And Flow Characteristics
P3NR
120
Coalescers
8
1-1/2 Inch Ports
105
7 Primary Pressure 100 PSIG (6.9 bar)
Pressure Drop - PSIG
Pressure Drop - bar
6 90
75
5
Regulators
4 60
3 45
2 30
Regulators
1 15
Filter /
0 0
-100 0 100 200 300 400 500 600 700
Flow - SCFM
-50 0 50 100 150 200 250 300
Lubricators
3
Flow - dm /s
n
Combos
Gauges – 2" Dial Face Gauge Ports (2) .................................................................... 1/4 Inch
60 psig (0 to 4.1 bar)................................... K4520N14060 Port Threads ........................................................... 3/4, 1, 1-1/2 Inch
160 psig (0 to 11.0 bar)............................... K4520N14160
300 psig (0 to 20.0 bar)............................... K4520N14300 Primary Pressure Rating –
Accessories
Maximum Primary Pressure..................... 250 psig (17.2 bar) Max.
1-3/4" Digital Round Face
160 psig (0 70 11.0 bar)............................K4517N14160D Temperature Rating .............................. 32°F to 175°F (0°C to 80°C)
Mounting Bracket Kit*.................................................P3NKA00MW Weight – 3/4"............................................................... 3.3 lb. (1.5 kg)
1".................................................................. 3.3 lb. (1.5 kg)
Service Kit – Relieving.................................................. P3NKA00PD 1-1/2" † ........................................................ 4.4 lb. (2.0 kg)
Materials of Construction
Adjusting Stem .......................................................................... Steel
Body .................................................................................... Aluminum
Bonnet ................................................................................ Aluminum
Piston....................................................................................... Plastic
Poppet Assembly .....................................................................Brass
Seals ..........................................................................................Nitrile
Springs – Poppet........................................................................ Steel
* If 1-1/2 BSPP E02 fittings are required, use P3NKA0BMW. † 1" Port Body with 1-1/2" Port Block.
NPT BSPP
Port Size
Filter /
§ SCFM = Standard Cubic Feet Per Minute at 100 PSIG Inlet, 75 PSIG
No Flow Secondary Setting, and 20 PSIG Pressure Drop.
Ordering Information
Accessories
R 119 — 02 J /M2
Technical Information
Flow Characteristics Flow Characteristics
R119-02J R119-03J
100 100
6 1/4 Inch Ports 6 3/8 Inch Ports
Secondary Pressure - PSIG
4 4
50 50
3 3
2
25
2
25
C
1 1
Selection
Product
0 0 0 0
0 20 40 60 80 100 120 0 25 50 75 100 125 150
Flow - SCFM Flow - SCFM
0 10 20 30 40 50 0 10 20 30 40 50 60 70
Flow - dmn3/s Flow - dmn3/s
Filters
Flow Characteristics
R119-04J
100
6 1/2 Inch Ports
Secondary Pressure - PSIG
Secondary Pressure - bar
Coalescers
Primary Pressure
5 75
50
3
Regulators
2
25
Regulators
Filter /
0 0
0 25 50 75 100 125 150 175 200
Flow - SCFM
0 10 20 30 40 50 60 70 80 90
Flow - dmn3/s
Lubricators
R119 Regulator Kits & Accessories Specifications
Gauges – 2" Dial Face Gauge Ports (2) . ....................................................................1/4 Inch
60 psig (0 to 4.1 bar)................................... K4520N14060 Port Threads .............................................................1/4, 3/8, 1/2 Inch
160 psig (0 to 11.0 bar)............................... K4520N14160
Combos
300 psig (0 to 20.0 bar)............................... K4520N14300 Pilot Port –
1/4 & 3/8" Threads...................................................................... 1/8"
1-3/4" Digital Round Face 1/2" Threads............................................................................... 1/4"
160 psig (0 to 11.0 bar).............................K4517N14160D
Reduced Pressure Range –
Accessories
Repair Kits – Adjustable to within 5 to 7 PSIG of Supply Pressure
Non-Relieving Diaphragm,
Supply Pressure ................................300 PSIG Maximum (20.4 bar)
Valve Assembly (1/2") ..................................................RK118X20A
Air Consumption –
Non-Relieving Diaphragm, Constant bleed from air pilot chamber: approx. 0.17 SCFM (10 SCFH)
Valve Assembly (1/4", 3/8") ..........................................RK118X20Y
Temperature Rating . ..........................40°F to 125°F (4.4°C to 52°C)
Relieving Diaphragm,
Valve Assembly (1/2") ..................................................RK119X20A Weight –
R119-02J, R119-03J .................................... 1.6 lb. (0.73 kg) / Unit
Relieving Diaphragm, 19 lb. (8.62 kg) / 12-Unit Master Pack
Valve Assembly (1/4", 3/8") ..........................................RK119X20Y
R119-04J ...................................................... 2.6 lb. (1.18 kg) / Unit
For Fluorocarbon Repair Kits, add X64 to Kit Number suffix. 21 lb. (9.53 kg) / 8-Unit Master Pack
For Non-Bleed Pilot Repair Kits, add X71 to Kit Number suffix.
Materials of Construction
Body, Ring, Top Plate ..................................................................Zinc
Bottom Plug............................................................................... Nylon
Innervalve . ................................................................................ Brass
Seals ....................................................................................... Buna N
Gauge Ports
• Ideal for those installations calling (2)
for constant pressure with wide
variation in flow.
• Diaphragm operated design with C
Filters
N
balanced poppet and constant bleed E
pilot for quick and accurate regulation.
B
• Secondary aspiration plus balanced
Coalescers
3/4" R119-06J/M2 A B C D E N
4.94 1.81 3.32 4.94 5.13 2.88
1" R119-08J/M2 (125) (46) (84) (125) (130) (73)
Lubricators
Ordering Information
R 119 — 06 J — /M2
Technical Information
4 4
3
50
3
50
C
2 2
25 25
Selection
Product
1 1
0 0 0 0
0 50 100 150 200 250 300 350 0 50 100 150 200 250 300 350 400
Flow - SCFM Flow - SCFM
0 20 40 60 80 100 120 140 160 0 20 40 60 80 100 120 140 160 180
Filters
Flow - dmn3/s Flow - dmn3/s
Coalescers
100 100
6 1-1/4 Inch Ports 6 1-1/2 Inch Ports
Regulators
4 4
50 50
3 3
2 2
25 25
Regulators
Filter /
1 1
0 0 0 0
0 100 200 300 400 500 0 100 200 300 400 500
Flow - SCFM Flow - SCFM
Lubricators
0 40 80 120 160 200 240 0 40 80 120 160 200 240
Flow - dmn3/s Flow - dmn3/s
Combos
Gauges – 2" Dial Face Gauge Ports (2) . ....................................................................1/4 Inch
60 psig (0 to 4.1 bar)................................... K4520N14060 Port Threads .................................................. 3/4, 1, 1-1/4, 1-1/2 Inch
160 psig (0 to 11.0 bar)................................K4520N14160
300 psig (0 to 20.0 bar)............................... K4520N14300 Reduced Pressure Range –
Accessories
Adjustable to Within 5 to 7 psig of Supply Pressure
1-3/4" Digital Round Face
160 psig (0 to 11.0 bar)............................. K4517N14160D Supply Pressure ................................. 300 psig Maximum (20.4 bar)
Repair Kits – Air Consumption –
Non-Relieving Diaphragm, Constant Bleed from Air Pilot Chamber:
Valve Assembly (3/4", 1") ............................................. RK118X20B Approximately 0.17 SCFM (10 SCFH)
Non-Relieving Diaphragm, Temperature Rating .......................... 40°F to 125°F (4.4°C to 52°C)
Valve Assembly (1-1/4", 1-1/2") ....................................RK118X20D Weight –
Relieving Diaphragm, R119-06J, R119-08J .................................... 5.2 lb. (2.36 kg) / Unit
Valve Assembly (3/4", 1") ............................................. RK119X20B 42 lb. (19.05 kg) / 8-Unit Master Pack
Relieving Diaphragm, R119-10J, R119-12J .................................... 5.6 lb. (2.54 kg) / Unit
Valve Assembly (1-1/4", 1-1/2") ....................................RK119X20D 46 lb. (20.87 kg) / 8-Unit Master Pack
For Fluorocarbon Repair Kits, add X64 to Kit Number suffix. Materials of Construction
Body, Ring, Top Plate ..................................................................Zinc
Bottom Plug, Innervalve .......................................................... Brass
Seals ....................................................................................... Buna N
Gauge Ports
• Ideal for those installations calling (2)
for constant pressure with wide variation
in flow.
• Piston operated design with balanced C
Filters
2-1/2" R119-20J
Filter /
inches (mm)
Flow Secondary Setting, and 20 psig Pressure Drop. Product rupture can cause serious injury.
Do not connect regulator to bottled gas.
Do not exceed maximum primary pressure rating.
Combos
Ordering Information
Accessories
R 119 — 16 J
Technical Information
Flow Characteristics
R119-16J, R119-20J
100
6 2 Inch Ports
3
50
C
Selection
2
Product
25
0 0
0 200 400 600 800 1000 1200 1400 1600 1800
Flow - SCFM
Filters
0 100 200 300 400 500 600 700 800
Flow - dmn3/s
Coalescers
Regulators
Regulators
Filter /
Lubricators
R119 Regulator Kits & Accessories Specifications
Gauges – 2" Dial Face Gauge Ports (2) . ....................................................................1/4 Inch
60 psig (0 to 4.1 bar)................................... K4520N14060 (Can be used for Full Flow)
Combos
160 psig (0 to 11.0 bar)................................K4520N14160 High Pressure Outlet for Pilot (Not seen in photo)...............1/4 Inch
300 psig (0 to 20.0 bar)............................... K4520N14300 Port Threads ....................................................................2, 2-1/2 Inch
1-3/4" Digital Round Face Reduced Pressure Range –
160 psig (0 to 11.0 bar)............................. K4517N14160D Adjustable to Within 5 to 7 psig of Supply Pressure
Accessories
Repair Kits – Supply Pressure ................................. 300 psig Maximum (20.4 bar)
Piston Type Regulation (2", 2-1/2") . ................................ RK119G
Air Consumption –
Constant Bleed from Air Pilot Chamber:
Approximately 0.17 SCFM (10 SCFH)
Constant Bleed from Reduced Pressure:
Approximately 0.17 SCFM (10 SCFH)
Temperature Rating ....................... 40°F to 120°F (4.4°C to 48.9°C)
Weight –
R119-16J, R119-20J ...................................... 15 lb. (6.80 kg) / Unit
15 lb. (6.80 kg) / 1-Unit Master Pack
Materials of Construction
Body, Piston ....................................................................... Aluminum
Seals ....................................................................................... Buna N
Innervalve . ............................................................. Brass & Stainless
➤
➤
Filter / Regulators
• Pipe Sizes 1/8 thru 1-1/2 Inch
➤
➤
Manual
Drain
Relieving
(With Gauge)
➤
05E22A13A*
120
8
➤
➤
90
6
5 75
C
4
15
a space saving package.
1
Selection
0 0
Product
10 0 10 20 30 40 50 60 70 80
Flow - SCFM
pressure drop.
Filter /
! WARNING
2. Determine maximum allowable pressure drop at
rated flow in SCFM. Product rupture can cause serious injury.
Do not connect regulator to bottled gas.
3. Refer to flow chart and select filter/regulator by Do not exceed maximum primary pressure rating.
choosing the curve that offers minimum pressure
Combos
CAUTION:
Accessories
Filter / Regulator
Turning the knob (A) clockwise applies a load to
control spring (B) which forces the piston/diaphragm
(C) and valve poppet assembly (D) to move downward
allowing filtered air to flow through the seat area (E) A
created between the poppet assembly and the seat.
“First stage filtration” begins when air pressure B
supplied to the inlet port is directed through deflector
plate (F) causing a swirling centrifugal action forcing L
liquids and coarse particles to the inner bowl wall (G)
and down below the lower baffle (H) to the quiet zone.
K
C C
After liquids and large particles are removed in the first D
stage of filtration “second stage filtration” occurs as air
Selection
Product
flows through element (J) where smaller particles are
filtered out and retained. The air flow now passes
➚
E
through seat area (E) to the outlet port of the unit.
Pressure in the downstream line is sensed below the F
Filters
piston/diaphragm (C) and offsets the load of control J
spring (B). When downstream pressure reaches the
set-point, poppet valve assembly (D) and piston/ G
H
Coalescers
diaphragm (C) move upward closing seat area (E).
Should downstream pressure exceed the desired
regulated pressure, the excess pressure will cause the
piston/ diaphragm (C) to move upward opening vent
Regulators
hole (K) venting the excess pressure to atmosphere
through the hole in the bonnet (L). (This occurs in the
standard relieving type regulator only.)
Regulators
Filter /
Lubricators
Combos
Semi Automatic Drain Automatic Pulse Drain Automatic Float Drain
Accessories
(Overnight Drain) (Spitter Drain) The float internal to this drain rises with
This drain offers a semi-automatic The diaphragm in this drain pulses increased liquid level. When the float
function when there is a differential when there is a pressure differential rises, it opens a seat area allowing the
pressure in the filter which occurs such as a valve cycling or cylinder trapped liquids to drain through the
when system pressure is shut off. The stroking downstream. This action bottom.
drain can also be used manually by flexes the diaphragm and allows the A manual override can be pushed in
gripping it with your fingertips and filter to drain the entrapped water. the bottom of the drain to unseat the
pushing upward. float if particulates create a block.
➤
Features
➤ ➤
➤ ➤
B
• Excellent water removal efficiency.
• Unbalanced poppet standard.
1/8" NPT
• Solid control piston for extended life. Gauge Ports
• Space saving package offers both filter (2) C
Distance Required
Accepts
Filters
‡
Poly Bowl
Dimensions
1/8" 14E01B13FC 14E05B13FC
A B C
1/4" 14E11B13FC 14E15B13FC 1.62 1.58 2.42
Metal Bowl (41) (40) (61)
Regulators
6.06 1.60
‡ For polycarbonate bowl see Caution on page C2. (154) (41)
§ SCFM = Standard cubic feet per minute at 100 psig inlet, Inches (mm)
90 psig no flow secondary setting and 10 psig pressure drop. † With Auto Drain
Lubricators
Ordering
Information 14E 1 1 B 13 F C — — ---
Combos
Technical Information
Relief And Flow Characteristics Relief And Flow Characteristics
14E01B13F* 14E11B13F*
100 100
1/8 Inch Ports 1/4 Inch Ports
100 PSIG (6.9 bar) Primary Pressure 100 PSIG (6.9 bar) Primary Pressure
6 6
80 80
5 5
4 60 4 60
C
3 3
40 40
2 2
20 20
1 1
Selection
Product
0 0 0
0
0 4 8 12 16 20 24 28 32 0 4 8 12 16 20 24 28 32
Rated Flow - SCFM Rated Flow - SCFM
0 2 4 6 8 10 12 14 0 2 4 6 8 10 12 14
3 3
Flow - dm /s Flow - dm /s
n n
Filters
CAUTION:
! WARNING
REGULATOR PRESSURE ADJUSTMENT – The working
range of knob adjustment is designed to permit outlet Product rupture can cause serious injury.
Coalescers
pressures within their full range. Pressure adjustment beyond Do not connect regulator to bottled gas.
this range is also possible because the knob is not a limiting Do not exceed maximum primary pressure rating.
device. This is a common characteristic of most industrial
regulators, and limiting devices may be obtained only by
Regulators
special design.
For best performance, regulated pressure should always be
set by increasing the pressure up to the desired setting.
Regulators
Filter /
14E Filter / Regulator Kits & Accessories Pressure & Temperature Ratings –
Polycarbonate Bowl
Bonnet Tamperproof Kit.........................................................P01265
0 to 150 psig (0 to 10.3 bar), 32°F to 125°F (0°C to 52°C)
Bowl Kits –
Poly Bowl – Automatic Drain............................................PS408BP Metal Bowl
Lubricators
Twist Drain...................................................... PS404P 0 to 250 psig (0 to 17.2 bar), 32°F to 175°F (0°C to 80°C)
Metal Bowl – Automatic Drain............................................PS451BP Secondary Pressure Ranges –
Twist Drain....................................................PS447BP Standard Pressure............................ 2 to 125 psig (0 to 8.6 bar)
Filter Element Kits – 40 Micron............................................. PS401P Medium Pressure................................ 1 to 30 psig (0 to 2.1 bar)
Medium Pressure................................. 1 to 60 psig (0 to 4.1 bar)
Combos
5 Micron............................................... PS403P
Adsorber.............................................. PS452P Low Pressure.......................................... 1 to 15 psig (0 to 1 bar)
Gauges – 30 psig (0 to 2.1 bar).................................... K4515N18030 Weight .........................................................................0.4 lb. (0.18 kg)
60 psig (0 to 4.1 bar).................................... K4515N18060 Materials of Construction
Accessories
160 psig (0 to 11.0 bar).................................K4515N18160
Adjusting Nut............................................................................. Brass
Mounting Bracket Kit* (Includes Panel Mount Nut).............PS417BP
Adjusting Stem & Spring .......................................................... Steel
Panel Mount Nut* . .................................................................P78652
Body.............................................................................................. Zinc
Poppet / Piston Kits – Unbalanced, Non-Relieving............ PS428P
Unbalanced, Relieving....................PS426P Bonnet, Knob, Seat, Piston, Holder & Deflector ...................Plastic
Springs – 1- 15 psig Range (Yellow).......................................P01176 Bowls Available – Transparent.................................... Polycarbonate
1- 30 psig Range (Black)........................................P01175 Metal (Without Sight Gauge) . ....................... Zinc
1- 60 psig Range (White)........................................P01174 Drains – Manual – Twist Type
2- 125 psig Range (Gold).......................................P01173 Body & Stem...........................................................Plastic
Seals........................................................................ Nitrile
Specifications Automatic – Pulse Type
Automatic Pulse Drain Tube Barb ........................................ 1/8 Inch Piston & Seals......................................................... Nitrile
Bowl Capacity .......................................................................1 Ounce Stem, Seat, Adaptor & Washers....................... Aluminum
Gauge Ports (2) (Can be used for Full Flow).......................... 1/8 Inch Filter Elements – 5 Micron (Standard)......................................Plastic
40 Micron (Optional).................................... Plastic
Port Threads ................................................................... 1/8, 1/4 Inch
Adsorber (Optional).................. Activated Charcoal
*Tighten panel mount nut 2.8 to 3.4 Nm (25 to 30 in-lbs) of torque. Seals .................................................................................................Nitrile
➤
➤
➤
➤
➤
Features
• Excellent Water Removal Efficiency
K
PU
SH
C
LO
C
C
(2)
• Balanced Valve Design for Precise Regulation
• Space Saving Package Offers Both Filter I
E
and Regulator Features in One Integral Unit N
Selection
Product
Distance Required
F To Remove All Bowls
Port NPT Regardless Of
Size Manual Twist Drain Drain Option
Coalescers
Poly Bowl‡
1/8" B344-01AGC B34 Filter / Regulator
1/4" B344-02AGC Dimensions
Metal Bowl without Sight Gauge A C D
Regulators
NOTE: 1.218 Dia. (31mm) hole required for panel mounting. Inches (mm)
‡ For polycarbonate bowl see Caution on page 2. † With Auto Drain
§ SCFM = Standard cubic feet per minute at 100 PSIG inlet,
Lubricators
Ordering Information
B34 4 — 02 A G C
Accessories
Technical Information
Flow Characteristics Flow Characteristics
R344-01AGC R344-02AGC
100 100
1/8 Inch Ports 1/4 Inch Ports
90 90
100 PSIG (6.9 bar) Primary Pressure 6 100 PSIG (6.9 bar) Primary Pressure
80 80
5 5
70 70
4 60 4 60
50 50
3 3
40 40
1
30
20
2
1
30
20
C
10 10
0 0 0
Selection
0
Product
0 5 10 15 20 25 30 35 40 0 5 10 15 20 25 30 35 40
Rated Flow - SCFM Rated Flow - SCFM
0 5 10 15 0 5 10 15
3 3
Flow - dm /s Flow - dm /s
n n
Filters
! WARNING ! CAUTION:
Product rupture can cause serious injury. REGULATOR PRESSURE ADJUSTMENT – The working range
Do not connect regulator to bottled gas. of knob adjustment is designed to permit outlet pressures within
Coalescers
Do not exceed maximum primary pressure rating. their full range. Pressure adjustment beyond this range is also
possible because the knob is not a limiting device. This is a
common characteristic of most industrial regulators, and limiting
devices may be obtained only by special design.
For best performance, regulated pressure should always be set
by increasing the pressure up to the desired setting.
Regulators
Regulators
Filter /
B34 Filter / Regulator Kits & Accessories Specifications
Adjusting Knob.......................................................RRP-16-005-000 Bowl Capacity ......................................................................1 Ounce
Bowl Kits –
Lubricators
Gauge Ports (2) .................................................................... 1/8 Inch
Zinc (D)............................................................................... BK505Y Maximum Pressure –
Zinc with Automatic Pulse Drain (D).................................BK505SY Zinc Bowl (D)............................................................ 0 to 300 PSIG
Polycarbonate (A)............................................................... BK504Y Polycarbonate Bowl (A)............................................ 0 to 150 PSIG
Polycarbonate with Automatic Pulse Drain (A).................BK504SY Port Threads . ............................................................... 1/8 &1/4 Inch
Drain Kits –
Combos
Reduced Pressure Range –
Automatic Pulse Drain 0 to 25 PSIG.......................................................... (0 to 1.7 bar) (A)
(Maximum Pressure = 175 PSIG).................................... RK504SY 0 to 60 PSIG . ........................................................ (0 to 4.1 bar) (B)
Filter Element Kits – 2 to 125 PSIG ...................................................(0.15 to 8.5 bar) (C)
5 Micron (All).................................................................FRP-96-729 Temperature Rating .......................... 40°F to 125°F (4.4°C to 52°C)
Accessories
Gauges – Weight –
1-1/2" Dial Size, 1/8" Back Connection Zinc Bowl (D).................................................0.6 lb. (0.27 kg) / Unit
0 to 60 PSIG (0 to 400 kPa).......................................K4515N18060
12 lb. (5.44 kg) / 24-Unit Master Pack
1-1/2" Dial Size, 1/8" Back Connection
Polycarbonate Bowl (A)................................. 0.3 lb. (0.14 kg) / Unit
0 to 160 PSIG (0 to 1100 kPa)................................... K4515N18160
6 lb. (2.72 kg) / 24-Unit Master Pack
Mounting Bracket Kit (Includes Plastic Panel Nut) ...... SA161X57
Panel Mount Nut – Materials of Construction
Plastic............................................................................... R05X51-P Adjusting Knob ....................................................................... Acetal
Aluminum......................................................................... R05X51-A Body .................................................................................... Aluminum
Repair Kits – Bowls –
Non-Relieving Diaphragm, Valve Assembly (All)........ GRP-96-726 Polycarbonate (A)..................................................... Polycarbonate
Relieving Diaphragm, Valve Assembly (All)................ GRP-96-725 Metal (D)....................................................................................Zinc
Springs – 0-25..................................................................GRP-95-111 Zinc with Automatic Pulse Drain
0-60................................................................. GRP-96-718
Elastomers ............................................................................. Buna N
0-125............................................................... GRP-96-717
Filter Element ................................................. Sintered Polyethylene
Filter Retainer, Vane Plate ..................................................... Acetal
Innervalve, Diaphragm, Button, Drain . ................................. Brass
➤
Features
➤ ➤
➤ ➤
B
• Space saving package offers both filter and
PU
SH
K
C
TO L O
Pulse Drain
5 micron and adsorber available.
• High Flow: 1/4" – 30 SCFM §
s
3/8" – 40 SCFM § Distance Required
m
F To Remove All
Filters
e
Bowls Regardless
t
Of Drain Option
i
Port NPT Accepts
t
Size Twist Drain Automatic Pulse Drain 1/8" Tubing
u
Coalescers
o
05E Filter / Regulator
WARNING
e
!
d
1/4" 05E12A13A* 05E1PA13A* Dimensions
e et
05E22A13A* 05E2PA13A* Product rupture can cause
y
3/8"
l
A B C
serious injury.
a o
Metal Bowl / Sight Gauge 2.00 2.06 3.16
Gr e obs
Regulators
ar
Regulators
‡ For polycarbonate bowl see Caution on page C2. † With Twist Drain or Auto
§ SCFM = Standard cubic feet per minute at 100 psig inlet, Pulse Drain
90 psig no flow secondary setting and 10 psig pressure drop.
NOTE: 1.53 Dia. (39mm) hole required for panel mounting.
Lubricators
Ordering
05E 1 2 A 13 A B — — ---
Information
Combos
Technical Information
Relief And Flow Characteristics Relief And Flow Characteristics
05E12A13A* 05E22A13A*
120 120
8 8
3/8 Inch Ports
105 Primary Pressure 100 PSIG (6.9 bar) 105 Primary Pressure 100 PSIG (6.9 bar)
7 7
90 90
6 6
75 5 75
5
4 60 4 60
3 45 3 45
2 30 2 30
C
1 15 1 15
0 0 0 0
10 0 10 20 30 40 50 60 70 80 10 0 10 20 30 40 50 60 70 80
Flow - SCFM Flow - SCFM
5 0 5 10 15 20 25 30 35 5 0 5 10 15 20 25 30 35
3 3
Flow - dm /s Flow - dm /s
Selection
Product
n n
CAUTION:
REGULATOR PRESSURE ADJUSTMENT – The working range of knob adjustment is designed
s
to permit outlet pressures within their full range. Pressure adjustment beyond this range is also
Filters
e
possible because the knob is not a limiting device. This is a common characteristic of most
it
industrial regulators, and limiting devices may be obtained only by special design.
t
For best performance, regulated pressure should always be set by increasing the pressure up to
u
the desired setting.
Coalescers
e d o t e
y l e
05E Filter / Regulator Kits & Accessories Specifications
a
Gr e obs o
Regulators
Bowl Guard Kit ...................................................................... PS905P Bowl Capacity ..................................................................2.0 Ounces
Bowl Kits – Gauge Port (2) ....................................................................... 1/4 Inch
Poly Bowl – Automatic Pulse Drain.................................... PS995P Sump Capacity .................................................................. 0.9 Ounce
Twist Drain...................................................... PS932P Port Threads ..................................................................1/4, 3/8 Inch
ar
Metal Bowl – Automatic Pulse Drain.................................... PS997P
Regulators
Pressure & Temperature Rating –
Filter /
Twist Drain...................................................... PS934P Polycarbonate Bowl – 0 to 150 psig (0 to 10.3 bar)
Sight Gauge / Automatic Pulse Drain............ PS996P 32°F to 125°F (0°C to 52°C)
Sight Gauge / Twist Drain.............................. PS935P
Metal Bowl – 0 to 250 psig (0 to 17.2 bar)
Drain Kit –
32°F to 175°F (0°C to 80°C)
Automatic Pulse Drain......................................................... PS998P
Lubricators
Semi-Auto Drain.................................................................. PS511P Automatic Pulse Drain – 10 to 150 psig (0.7 to 10.3 bar)
Twist Drain ....................................................................... PS512P Weight........................................................................ 1.35 lb. (0.6 kg)
Push ‘N’ Drain...................................................................... PS513P
Filter Element Kits – 40 Micron .......................................... PS901P
5 Micron............................................. PS902P Materials of Construction
Combos
Adsorber............................................. PS931P Adjusting Stem .......................................................................... Steel
Sight Gauge Kit..................................................................... PS914P Body ............................................................................................. Zinc
Gauges – 1-1/2" Dial Face Bonnet, Internal Parts ............................................................ Plastic
30 psig (0 to 2.1 bar)................................... K4515N14030
Accessories
Bowl Guard ................................................................................. Steel
60 psig (0 to 4.1 bar)................................... K4515N14060
160 psig (0 to 11.0 bar)............................... K4515N14160 Collar ........................................................................................ Plastic
300 psig (0 to 20.0 bar).............................. K4515N14300 Diaphragm .................................................................................Nitrile
2" Dial Face Drain ......................................................................................... Plastic
60 psig (0 to 4.1 bar).................................. K4520N14060 Filter Elements – 40 Micron (Standard)................................. Plastic
160 psig (0 to 11.0 bar).............................. K4520N14160 5 Micron (Optional).................................... Plastic
300 psig (0 to 20.0 bar).............................. K4520N14300 Adsorber (Optional)................Activated Charcoal
Mounting Bracket Kit (Includes Panel Mount Nut)...............PS963P Knob ......................................................................................... Plastic
Panel Mount Nut – Metal.......................................................PS964P Seals ..........................................................................................Nitrile
Springs – 1-30 psig Range.....................................................P04427 Sight Gauge ......................................................... Polyamide (Nylon)
1-60 psig Range....................................................P04426 Springs – Poppet & Control........................................................ Steel
2-125 psig Range...................................................P04425
2-200 psig .............................................................P02934
Relieving Service Kit ............................................................PS908P
Non-Relieving Service Kit ...................................................PS909P
Bonnet Assembly Kit ........................................................... PS915P
➤
Features
➤ ➤
➤ ➤
PU
CK
• Space saving package offers both filter and
H T LO
S
O
Standard part numbers shown bold. For other models refer to ordering
information below.
! WARNING
‡ For polycarbonate bowl see Caution on page C2. Product rupture can cause serious injury.
§ SCFM = Standard cubic feet per minute at 100 psig inlet,
Do not connect regulator to bottled gas.
Lubricators
Ordering
06E 1 2 A 13 A C — — ---
Combos
Information
Accessories
2 Metal Bowl Guard / 3 Twist Drain Gauge Gauge C Current L† Preset (Example:
065 = 65 psig)
Twist Drain 4 Sight Gauge / 11 60 psig 16 60 psig Non-Adjustable
6 Metal Bowl Guard / Twist Drain 13 125 psig 18 125 psig P† Preset Adjustable
Auto Float Drain 7 Auto Float Drain 15§ 250 psig 21§ 250 psig † Inlet Pressure is 100 psig. For
8 Sight Gauge / § If 250 psig spring range is other pressures, contact
factory.
Auto Float Drain used, use metal bowl.
Technical Information
Relief And Flow Characteristics Relief And Flow Characteristics
06E12A13A* 06E22A13A*
100 100
4 60 4 60
3 3
40 40
2 2
20 20
1 1/4 Inch Ports 1 3/8 Inch Ports
C
100 PSIG (6.9 bar) Primary Pressure 100 PSIG (6.9 bar) Primary Pressure
0 0 0 0
10 0 10 20 30 40 50 60 70 10 0 10 20 30 40 50 60 70
Rated Flow - SCFM Rated Flow - SCFM
5 0 5 10 15 20 25 30 5 0 5 10 15 20 25 30
3
Flow - dm /s 3
n Flow - dm /s
n
CAUTION:
Selection
Relief And Flow Characteristics
Product
06E32A13A*
100
REGULATOR PRESSURE ADJUSTMENT – The working
Filters
device. This is a common characteristic of most industrial 3
regulators, and limiting devices may be obtained only by 40
2
special design. 20
1 1/2 Inch Ports
For best performance, regulated pressure should always be
Coalescers
100 PSIG (6.9 bar) Primary Pressure
0
set by increasing the pressure up to the desired setting. 0
10 0 10 20 30 40 50 60 70 80 90
Rated Flow - SCFM
5 0 5 10 15 20 25 30 35 40
06E Filter / Regulator Kits & Accessories Flow - dm /s
n
3
Regulators
Bowl Guard Kit.................................................................................. PS705P Polycarbonate Bowl – 0 to 150 psig (0 to 10.4 bar)
Bowl Kits – 32°F to 125°F (0°C to 52°C)
Poly Bowl – Automatic Float Drain.............................................. PS722P Metal Bowl – 0 to 250 psig (0 to 17.2 bar)
Twist Drain............................................................... PS732P 32°F to 175°F (0°C to 80°C)
Metal Bowl – Automatic Float Drain.............................................. PS726P Automatic Float Drain – 15 to 250 psig (1.0 to 17.2 bar)
Regulators
Secondary Pressure Ranges –
Filter /
Semi-Auto Drain...................................................... PS794P
Twist Drain............................................................... PS734P Standard Pressure........................................... 2 to 125 psig (0 to 8.6 bar)
Sight Gauge / Automatic Drain............................... PS723P Low Pressure....................................................... 1 to 60 psig (0 to 4.1 bar)
Sight Gauge / Twist Drain....................................... PS735P High Pressure............................................... 5 to 250 psig (0.4 to 17.2 bar)
Control Knob................................................................................... P04069B Sump Capacity........................................................................... 1.75 Ounces
Lubricators
Drain Kits – Automatic Float Drain.............................................. PS506P Weight...................................................................................... 1.6 lb. (0.7 kg)
Semi-Auto Drain.......................................................PS511P
Twist Drain............................................................... PS512P Materials of Construction
Push ‘N’ Drain......................................................... PS513P Adjusting Stem....................................................................................... Steel
Filter Element Kits – 40 Micron....................................................... PS701P Body......................................................................................................... Zinc
5 Micron......................................................... PS702P Bonnet, Internal Parts.........................................................................Plastic
Combos
Adsorber........................................................ PS731P Bowls Available – Transparent..............................................Polycarbonate
Gauges – 2" Dial Face Metal (With or Without Sight Gauge) . .................... Zinc
60 psig (0 to 4.1 bar)............................................. K4520N14060 Bowl Guard............................................................................................. Steel
160 psig (0 to 11.0 bar)..........................................K4520N14160 Collar.....................................................................................................Plastic
Accessories
300 psig (0 to 20.0 bar)......................................... K4520N14300 Diaphragm............................................................................................. Nitrile
1-3/4" Digital Round Face Drains – Manual Twist Drain Standard
160 psig (0 to 11.0 bar)........................................K4517N14160D Body & Nut.........................................................................Plastic
Mounting Bracket Kit (Includes Panel Mount Nut)......................... PS707P Manual Push ‘N’ Drain Optional
Panel Mount Nut.................................................................................P04082 Body.................................................................................... Nitrile
Stem.................................................................................... Brass
Service Kits – Non-Relieving (Includes Poppet)..............................PS711P
Relieving (Includes Poppet)..................................... PS710P Automatic Float Drain Optional
(Interchangeable for Field Conversions)
Seat Insert Kit .................................................................................. PS713P
Operating Range.......................... 10 to 250 psig (.7 to 17.2 bar)
Springs – 1- 30 psig Range............................................................... P01698 Housing, Float....................................................................Plastic
1- 60 psig Range...............................................................P04062 Seals................................................................................... Nitrile
2- 125 psig Range.............................................................P04063 Springs, Push Rod............................................... Stainless Steel
5- 250 psig Range............................................................P04064 Knob ....................................................................................................Plastic
Tamperproof Kit (Key Lock)............................................................. PS737P Filter Elements – 40 Micron (Standard).............................................Plastic
5 Micron (Optional)............................................... Plastic
Specifications Adsorber (Optional)............................Activated Charcoal
Bowl Capacity..............................................................................4.4 Ounces Seals....................................................................................................... Nitrile
Gauge Ports (2) . .............................................................................. 1/4 Inch Sight Gauge................................................................................... Polyamide
(Can be used as Additional Full Flow 1/4" Outlet Ports) Springs – Poppet........................................................................... Stainless
Port Threads .......................................................................1/4, 3/8, 1/2 Inch Control.................................................................................. Steel
➤
Features
➤ ➤
➤ ➤
B
• Space saving package offers both filter and
PU
CK
H T LO
S
O
Drain Option
Ordering
07E 3 2 A 13 A C — — ---
Combos
Information
Accessories
Technical Information
Relief And Flow Characteristics Relief And Flow Characteristics
07E32A13A 07E42A13A
100 100
4 60 60
4
3 3
40 40
2 2
20 20
C
1 1/2 Inch Ports 1 3/4 Inch Ports
100 PSIG (6.9 bar) Primary Pressure 100 PSIG (6.9 bar) Primary Pressure
0 0 0 0
10 0 10 30 50 70 90 110 130 10 0 10 30 50 70 90 110 130 150 170
Rated Flow - SCFM Rated Flow - SCFM
5 0 5 15 25 35 45 55 5 0 5 15 25 35 45 55 65 75
3
Flow - dm /s Flow - dm3 /s
n n
CAUTION:
Selection
Product
REGULATOR PRESSURE ADJUSTMENT – The working
range of knob adjustment is designed to permit outlet
pressures within their full range. Pressure adjustment beyond
this range is also possible because the knob is not a limiting
Filters
device. This is a common characteristic of most industrial
regulators, and limiting devices may be obtained only by
special design.
Coalescers
For best performance, regulated pressure should always be
set by increasing the pressure up to the desired setting.
Regulators
Bowl Guard Kit.................................................................................. PS805P Polycarbonate Bowl – 0 to 150 psig (0 to 10.4 bar)
32°F to 125°F (0°C to 52°C)
Bowl Kits –
Poly Bowl – Automatic Float Drain.............................................. PS822P Metal Bowl – 0 to 250 psig (0 to 17.2 bar)
32°F to 175°F (0°C to 80°C)
Twist Drain............................................................... PS832P
Automatic Float Drain – 15 to 250 psig (1.0 to 17.2 bar)
Metal Bowl – Automatic Float Drain.............................................. PS826P
Regulators
Semi-Auto Drain...................................................... PS894P Secondary Pressure Ranges –
Filter /
Twist Drain............................................................... PS834P Standard Pressure ...........................................2 to 125 psig (0 to 8.6 bar)
Sight Gauge / Automatic Drain............................... PS823P Low Pressure....................................................... 1 to 60 psig (0 to 4.1 bar)
Sight Gauge / Twist Drain....................................... PS835P High Pressure............................................... 5 to 250 psig (0.4 to 17.2 bar)
Control Knob ............................................................................... P04069B Sump Capacity.............................................................................2.8 Ounces
Lubricators
Drain Kits – Automatic Float Drain.............................................. PS506P Weight.......................................................................................2.5 lb. (1.1 kg)
Semi-Auto Drain.......................................................PS511P
Twist Drain............................................................... PS512P Materials of Construction
Push ‘N’ Drain......................................................... PS513P Adjusting Stem....................................................................................... Steel
Filter Element Kits – 40 Micron....................................................... PS801P Body......................................................................................................... Zinc
5 Micron......................................................... PS802P Bonnet, Internal Parts.........................................................................Plastic
Combos
Adsorber........................................................ PS831P Bowls Available – Transparent..............................................Polycarbonate
Gauges – 2" Dial Face Metal (With or Without Sight Gauge) . .................... Zinc
60 psig (0 to 4.1 bar)............................................. K4520N14060 Bowl Guard............................................................................................. Steel
160 psig (0 to 11.0 bar)..........................................K4520N14160 Collar...................................................................................... Plastic or Metal
Accessories
300 psig (0 to 20.0 bar)......................................... K4520N14300 Diaphragm............................................................................................. Nitrile
1-3/4" Digital Round Face Drains – Manual Twist Drain Standard
160 psig (0 to 11.0 bar)........................................K4517N14160D Body & Nut.........................................................................Plastic
Mounting Bracket Kit (Includes Panel Mount Nut)......................... PS807P Manual Push ‘N’ Drain Optional
Panel Mount Nut.................................................................................P04082 Body.................................................................................... Nitrile
Stem.................................................................................... Brass
Service Kits – Non-Relieving (Includes Poppet)..............................PS811P
Relieving (Includes Poppet)..................................... PS810P Automatic Float Drain Optional
(Interchangeable for Field Conversions)
Seat Insert Kit .................................................................................. PS813P
Operating Range.......................... 10 to 250 psig (.7 to 17.2 bar)
Springs – 1- 30 psig Range............................................................... P01698 Housing, Float....................................................................Plastic
1- 60 psig Range...............................................................P04062 Seals................................................................................... Nitrile
2- 125 psig Range.............................................................P04063 Springs, Push Rod............................................... Stainless Steel
5- 250 psig Range............................................................P04064
Knob ....................................................................................................Plastic
Tamperproof Kit (Key Lock)............................................................. PS737P
Filter Elements – 40 Micron (Standard).............................................Plastic
Specifications
5 Micron (Optional)............................................... Plastic
Adsorber (Optional)............................Activated Charcoal
Bowl Capacity.............................................................................. 7.2 Ounces Seals....................................................................................................... Nitrile
Gauge Ports (2) . .............................................................................. 1/4 Inch Sight Gauge................................................................................... Polyamide
(Can be used as Additional Full Flow 1/4" Outlet Ports) Springs – Poppet........................................................................... Stainless
Port Threads .............................................................................. 1/2, 3/4 Inch Control.................................................................................. Steel
➤
Features A
➤ ➤
➤ ➤
PU
CK
1-1/2" port extension to 1" ported bodies.
H T LO
S
O
C
C
• Large filter element surface guarantees low pressure (2)
s
• High Flow: 3/4" – 250 SCFM §
m
Filters
e
Bowl
it
F Removal
1-1/2 – 250 SCFM § Clearance
ut
NPT P3NE Filter / Regulator
Coalescers
o
Port Size
Twist Drain Automatic Float Drain Dimensions
e d t e
Metal Bowl / Sight Gauge A A (PB) B C
y e
3.62 5.91 3.62 6.38
l
3/4" P3NEA96GSMBNN P3NEA96GSABNN
a o
(92) (150) (92) (162)
Gr e obs
Regulators
ar
ordering information below. Inches (mm)
Regulators
Ordering
Combos
Information P3N E a 9 8 G S M b N N
Accessories
Engineering
Level
A Current
Pressure Range
w/o Gauge
Port Type Port Size Element Bowl Drains Relief Adjustment L 60 PSI
1* G Thread 6 3/4" A Adsorber S Metal M Twist B Relieving N Non- (0 to 4 bar)
(BSPP) (w/o Port E 5 Micron Bowl Drain N Non- Rising N 125 PSI
Female Blocks) G 40 Micron w/ Sight A Automatic Relieving Knob (0 to 8 bar)
2 Rc Thread 8 1" Gauge Float H 250 PSI
(BSPT) (w/o Port Drain (0 to 17 bar)
Female Blocks) w/ Gauge
9 NPT P 1-1/2" Port M 60 PSI
Female Blocks (w/ (0 to 4 bar)
* 3/4 & 1 inch
1" Ported G 125 PSI
meet ISO 1179-1 Body) (0 to 8 bar)
Standard.
Note: BSPP ported units supplied using NPT ported J 250 PSI
BOLD ITEMS ARE MOST POPULAR. bodies and BSPP port block kits. (0 to 17 bar)
Technical Information
Relief And Flow Characteristics Relief And Flow Characteristics
P3NE P3NE
120 120
8 8
3/4 Inch Ports 105 1 Inch Ports
105
7 100 PSIG (6.9 bar) Primary Pressure 7 100 PSIG (6.9 bar) Primary Pressure
90 6 90
6
75 75
5 5
60 4 60
4
3 45 3 45
1
30
15
2
1
30
15
C
0 0 0 0
-100 0 100 200 300 400 500 600 -100 0 100 200 300 400 500 600
Flow - SCFM Flow - SCFM
Selection
Product
-50 0 50 100 150 200 250 -50 0 50 100 150 200 250
3 3
Flow - dm /s Flow - dm /s
n n
m s
Relief And Flow Characteristics
Filters
P3NE
e
120
t
8
i
105 1-1/2 Inch Ports
CAUTION: 7 100 PSIG (6.9 bar) Primary Pressure
Coalescers
o
75
range of knob adjustment is designed to permit outlet 5
d t e
pressures within their full range. Pressure adjustment beyond 60
e
4
e
this range is also possible because the knob is not a limiting
y l
3 45
a
device. This is a common characteristic of most industrial
Gr e obs o
Regulators
2 30
regulators, and limiting devices may be obtained only by
1 15
special design.
0 0
For best performance, regulated pressure should always be -100 0 100 200 300 400 500 600
Flow - SCFM
set by increasing the pressure up to the desired setting.
ar
Regulators
-50 0 50 100 150 200 250
Filter /
3
Flow - dm /s
n
Lubricators
Metal Bowl – Sight Gauge / Automatic Float Drain..P3NKA00BSA Gauge Ports (2) .................................................................... 1/4 Inch
Sight Gauge / Twist Drain.................. P3NKA00BSM Port Threads .......................................................... 3/4, 1, 1-1/2* Inch
Sight Gauge / Push ‘N’ Drain..............P3NKA00BSP
Pressure & Temperature Rating –........ 0 to 250 psig (0 to 17.2 bar)
Bowl Latch Kit .......................................................................C11A33 32°F to 175°F (0°C to 80°C)
Control Knob ................................................................. P3NKA00PN For Secondary Pressure Ranges see above charts.
Combos
Drain Kit – Automatic Float Drain.......................................... PS506P Automatic Float Drain – 15 to 250 psig (1.0 to 17.2 bar)
Semi-Auto Drain.................................................. PS511P Sump Capacity .................................................................6.8 Ounces
Twist Drain........................................................... PS512P Weight – 3/4"................................................................ 5.3 lb. (2.4 kg)
Push ‘N’ Drain...................................................... PS513P 1"................................................................... 5.3 lb. (2.4 kg)
Accessories
Filter Element Kits – 40 Micron ................................P3NKA00ESG 1-1/2"* ........................................................ 6.43 lb. (2.9 kg)
5 Micron................................... P3NKA00ESE
Adsorber................................... P3NKA00ESA Materials of Construction
Gauges – 2" Dial Face Adjusting Stem .......................................................................... Steel
60 psig (0 to 4.1 bar)................................... K4520N14060 Body, Bonnet, Bowl ........................................................... Aluminum
160 psig (0 to 11.0 bar)............................... K4520N14160 Drain ......................................................................................... Plastic
300 psig (0 to 20.0 bar)............................... K4520N14300 Filter Elements – 40 Micron (Standard)................................. Plastic
1-3/4" Digital Round Face 5 Micron (Optional).................................... Plastic
160 psig (0 70 11.0 bar)............................K4517N14160D Adsorber (Optional)................Activated Charcoal
Mounting Bracket Kit* .................................................P3NKA00MW Knob ......................................................................................... Plastic
Service Kit – Relieving.................................................. P3NKA00RR Piston ....................................................................................... Plastic
Non-Relieving........................................... P3NKA00RN Seals ..........................................................................................Nitrile
Sight Gauge Kit .............................................................P3NKA00PE Sight Gauge ......................................................... Polyamide (Nylon)
Springs – 1-60 psig Range................................................. C10A1304 Springs – Poppet & Control........................................................ Steel
2-125 psig Range............................................... C10A1308
5-250 psig Range............................................... C10A1317
* If 1-1/2 BSPP E02 fittings are required, use P3NKA0BMW. * 1" Port Body with 1-1/2" Port Block.
Standard – Coalescing 12E Series 3/8", 1/2", 3/4" – Basic 1/2" Body
➤
Features
➤ ➤
➤ ➤
B
• Space saving package offers both coalescer and
PU
CK
H T LO
S
O
D
• Two high flow 1/4" gauge ports can be used
as additional outlets.
• High Flow: Grade 6 Element
3/8" – 35 SCFM§
Filters
Distance Required
1/2" – 40 SCFM § To Remove All F
Bowls Regardless
3/4" – 45 SCFM § Of Drain Option
Coalescers
Inches (mm)
Filter /
Ordering
Information 12E 3 3 E 13 A A — — ---
Accessories
Technical Information
Flow Characteristics
12E33E13A*
100
4 60
3
40
C
2
20
1 1/2 Inch Ports
100 PSIG (6.9 bar)
Primary Pressure
0 0
10 0 10 20 30 40 50 60 70
Selection
Rated Flow - SCFM
Product
5 0 5 10 15 20 25 30
3
Flow - dm /s
n
CAUTION:
REGULATOR PRESSURE ADJUSTMENT – The working range of knob adjustment is
Filters
designed to permit outlet pressures within their full range. Pressure adjustment beyond
this range is also possible because the knob is not a limiting device. This is a common
characteristic of most industrial regulators, and limiting devices may be obtained only by
special design.
Coalescers
For best performance, regulated pressure should always be set by increasing the pressure
up to the desired setting.
Regulators
12E Filter / Regulator Kits & Accessories Secondary Pressure Ranges –
Standard Pressure................................ 2 to 125 psig (0 to 8.6 bar)
Bonnet Assembly Kit .......................................................... PS715P Low Pressure........................................... 1 to 60 psig (0 to 4.1 bar)
Bowl Kits – High Pressure................................... 5 to 250 psig (0.4 to 17.2 bar)
Metal Bowl – Automatic Float Drain...................................PS826P Sump Capacity ............................................................... 2.8 Ounces
Regulators
Twist Drain....................................................PS834P
Filter /
Weight...........................................................................2.5 lb. (1.1 kg)
Push ‘N’ Drain............................................... PS825P
Control Knob P04069B
Drain Kits – Automatic Float Drain...................................PS506P Materials of Construction
Lubricators
Twist Drain.................................................... PS512P Adjusting Stem . ........................................................................ Steel
Push ‘N’ Drain............................................... PS513P
Body ............................................................................................. Zinc
Filter Element Kits – Grade 6..............................................PS884P
Bonnet, Internal Parts ........................................................... Plastic
Grade 10............................................PS885P
Bowls Available – Metal (Without Sight Gauge) ....................... Zinc
Gauges – 2" Dial Face
60 psig (0 to 4.1 bar)................................... K4520N14060 Collar For Bonnet .................................................................... Metal
Combos
160 psig (0 to 11.0 bar)................................K4520N14160 Control Spring............................................................................ Steel
300 psig (0 to 20.0 bar)............................... K4520N14300 Diaphragm.................................................................................Nitrile
1-3/4" Digital Round Face Drains – Manual Twist Drain Standard
Accessories
160 psig (0 to 11.0 bar)............................. K4517N14160D Body & Nut............................................................ Plastic
Mounting Bracket Kit (Includes Panel Mount Nut)............. PS807P Manual Push ‘N’ Drain Optional
Service Kit – Relieving (Includes Poppet)............................PS886P Body........................................................................Nitrile
Stem........................................................................Brass
Springs – 1- 30 psig Range....................................................P01698
1- 60 psig Range....................................................P04062 Automatic Float Drain Optional
2- 125 psig Range..................................................P04063 (Interchangeable for Field Conversions)
5- 250 psig Range..................................................P04064 Operating Range............... 10 to 250 psig (.7 to 17.2 bar)
Housing, Float....................................................... Plastic
Tamperproof Kit (Key Lock).................................................. PS737P Seals........................................................................Nitrile
Springs, Push Rod................................... Stainless Steel
Specifications
Knob ........................................................................................ Plastic
Bowl Capacity .................................................................7.2 Ounces
Filter Element –
Gauge Ports (2) .................................................................... 1/4 Inch Borosilicate & felt glass fibers 99.97% DOP efficiency
(Can be used as Additional Full Flow 1/4" Outlet Ports) Largest Aerosol Particle Passed (Grade 6)...........0.75 Microns
Port Threads .......................................................... 3/8, 1/2, 3/4 Inch Largest Solid Particle Passed (Grade 6).............. 0.30 Microns
Pressure & Temperature Ratings – Seals ..........................................................................................Nitrile
Metal Bowl – 0 to 250 psig (0 to 17.2 bar) Sight Gauge....................................................................... Polyamide
32°F to 175°F (0°C to 80°C) Springs – Poppet................................................................. Stainless
.3
6
2
.1
Flow Characteristics
3
Flow - dm /s
n
Lubricator Selection
Once the required flow is determined for a pneumatic
1. Determine maximum system flow requirements.
Coalescers
F442 Oil
Lubricators
Micro-Mist
The Micro-Mist lubricators inject a micro-mist of oil into However, a proportion of the inlet air passes through
the flowing air stream to automatically provide the the venturi, assuring that oil delivery increases linearly
correct amount of internal lubrication for air tools and with increased air flow rate. This proportioning method
other pneumatic devices. This type of lubricator can be is advantageous at low inlet flows because the venturi
precisely adjusted to a very low oil flow rate because design remains efficient.
only a portion of the oil drops seen in the sight dome The check ball (E) prevents reverse oil flow down the
goes downstream. The lubricator should be used
where only a very minute amount of lubricant is
pickup tube when air flow stops. Thus, oil delivery can
resume immediately when air flow restarts. Micro-Mist
C
desirable or where it is necessary for the oil to remain Lubricators can only be filled when the air supply is
in suspension in the air stream for long distances. shut off.
Selection
Product
Operation
Air flowing through the unit goes through two paths. At F
Filters
low air flow rates, the majority of the air flows through
C G
venturi section (A). The rest of the air slightly deflects B
and flows by the flapper (B). The velocity of the air
H
Coalescers
➡
➡
flowing through venturi section (A) creates a pressure A
drop at throat section (C). This lower pressure allows
oil to be forced from the reservoir through the pickup E
tube (D) past the check ball (E), to the dome assembly
D
Regulators
where the rate of oil flow is controlled by metering
screw (F). Rotation of the metering screw (F) in the
counterclockwise direction increases the oil flow rate;
J K
in the clockwise direction decreases the oil flow rate.
Regulators
Oil then flows through the clearance between the inner
Filter /
and outer sight domes (G) where drops are formed
and drip into the nozzle tube (H). Here it is then D
broken into fine particles as it expands into the low
Lubricators
pressure venturi. From there, the atomized oil flows
through the precision orifice (J). This action causes
the larger particles of oil to fall back into the reservoir
where it can recirculate through the system. The
Combos
remaining mist of fine particles (5 micron or smaller –
about 3% of which passed through the sight dome) is
then carried through opening (K) where it joins and
mixes with air that bypassed the flapper (B). As air
Accessories
flow rate increases, the flapper (B) deflects, allowing
most of the inlet air to bypass the venturi section (A).
s
D
m
• Removable drip control knob for tamper
Filters
t e
resistance.
t i
• High Flow: 1/4" – 40 SCFM §
u
3/8" – 40 SCFM § Distance Required
Coalescers
o
F To Remove All
e
Bowls Regardless
d t
Of Drain Option
e e
Port NPT
y l
15L Lubricator
a
Size Twist Drain No Drain
Gr e obs o
Regulators
Dimensions
Poly Bowl ‡ / Metal Guard
1/4" — 15L12N* A B C C1
2.00 2.06 2.26 3.35
3/8" — 15L22N* (51) (52) (57) (85)
ar
Regulators
1.77 .39
ordering information below.
‡ For polycarbonate bowl and sight dome, see Caution on page C2. (45) (10)
§ SCFM = Standard cubic feet per minute at 90 psig inlet and 5 psig Inches (mm)
† With Twist Drain.
pressure drop.
Combos
Ordering Information
Accessories
15L 1 2 N A — —
Port Size Bowl Options Fill Options Engineering Port Type Options
1 1/4 Inch Polycarbonate Bowl Metal Bowl B With Fill Plug Level Blank NPT Blank No Options
2 3/8 Inch 1 No Drain 4 Sight Gauge / F With Body A Current 1* BSPP
2 Metal Bowl Guard / Twist Drain Pressure Fill 2 BSPT
No Drain 8 Sight Gauge / N No Fill Plug * 1/4 & 3/8 inch
5 Pressure Fill Pressure Fill meet ISO 1179-1
6 Metal Bowl Guard / Standard.
Pressure Fill
Technical Information
9 9
.6 .6
8
.5 .5
C
7 7
.4 6 .4 6
5 5
.3 .3
4 4
Selection
3 3
Product
.2 .2
2 2
Flow Characteristics .1
Flow Characteristics
.1
1 15L11N* 1 15L21N*
1/4 Inch Ports 3/8 Inch Ports
s
0 0 0 0
0 10 20 30 40 50 60 70 80 90 100 0 20 40 60 80 100 120 140
Flow - SCFM
m
Flow - SCFM
Filters
t e
0 5 10 15 20 25 30 35 40 45 0 10 20 30 40 50 60
i
3 3
Flow - dm /s Flow - dm /s
n n
ut
Coalescers
e d o t e
ay ol e
Gr e obs
Regulators
ar
Regulators
Filter /
Suggested Lubricant . ..........................................................F442 Oil
15L Micro-Mist Lubricator
Petroleum based oil of 100 to 200 SSU viscosity at 100°F (38°C)
Kits & Accessories and an aniline point greater than 200°F (93
Lubricators
Adjustment Knob ..................................................................P04121 (DO NOT USE OILS WITH ADDITIVES, COMPOUNDED OILS
Bowl Guard Kit ...................................................................... PS905P CONTAINING SOLVENTS, GRAPHITE, DETERGENTS, OR
Bowl Kits – SYNTHETIC OILS.)
Poly Bowl – No Drain......................................................... PS946P Weight .......................................................................... 1 lb. (0.45 kg)
Metal Bowl – Sight Gauge / Twist Drain............................... PS929P
Combos
Drain Kit – Twist Drain............................................................. PS512P Materials of Construction
Mounting Bracket Kit ............................................................ PS943P Body ............................................................................................. Zinc
Oil – 1 Gal..............................................................................F442002 Bowls – Transparent .................................................... Polycarbonate
Accessories
12 Quart Case...............................................................F442003 Metal (With Sight Gauge)................................................ Zinc
4 Gallon Case...............................................................F442005
Bowl Guard ................................................................................. Steel
Pressure Fill Adapter Kit ...................................................... PS916P
Collar .........................................................................................Plastic
Service Kit ............................................................................. PS948P
Drains – Twist – Body & Nut......................................................Plastic
Sight Dome Kit ...................................................................... PS740P
Injector Meter Block & Base Assembly ..................................Plastic
Sight Gauge Kit ..................................................................... PS914P
Seals ........................................................................................... Nitrile
Sight Dome .................................................................. Polycarbonate
Specifications
Sight Gauge ........................................................... Polyamide (Nylon)
Bowl Capacity ..................................................................2.0 Ounces
Minimum Flow for Lubrication ......................... 2 SCFM at 100 psig
Port Threads . ................................................................. 1/4, 3/8 Inch
Pressure & Temperature Ratings –
Polycarbonate Bowl – 0 to 150 psig (0 to 10.3 bar)
32°F to 125°F (0°C to 52°C)
Metal Bowl – 0 to 250 psig (0 to 17.2 bar)
32°F to 175°F (0°C to 80°C)
F To Remove All
3/8" – 60 SCFM § Bowls Regardless
1/2" – 90 SCFM § Of Drain Option
3/8" — 16L22BE
D D† E
1/2" — 16L32BE 5.58 5.69 7.82
Metal Bowl / Sight Gauge (142) (145) (199)
1/4" 16L14BE — E† F
Regulators
Filter /
pressure drop.
Combos
Ordering Information
16L 1 2 B E —
Accessories
Technical Information
Primary Pressure - bar Primary Pressure - bar
2.4 bar 6.2 bar 10.3 bar 2.4 bar 6.2 bar 10.3 bar
Primary Pressure - PSIG Primary Pressure - PSIG
35 PSIG 90 PSIG 150 PSIG 35 PSIG 90 PSIG 150 PSIG
7 7
6 .4 6
.4
5 5
.3 .3
4 4
.2 3
C
.2 3
2 2
.1 .1
1 1
Flow Characteristics Flow Characteristics
16L12B* 1/4 Inch Ports 16L22B* 3/8 Inch Ports
0 0 0
0 0 10 20 30 40 50 60 70 80 90 100
Selection
0 10 20 30 40 50 60 70
Product
Flow - SCFM Flow - SCFM
0 5 10 15 20 25 30 0 5 10 15 20 25 30 35 40 45
3
Flow - dm /s
3 Flow - dm /s
n
n
Primary Pressure - bar
2.4 bar 6.2 bar 10.3 bar
Primary Pressure - PSIG
Filters
35 PSIG 90 PSIG 150 PSIG
7
.4 6
Pressure Drop - PSIG
Pressure Drop - bar
Coalescers
.3
4
.2 3
Regulators
.1
1
Flow Characteristics
16L32B* 1/2 Inch Ports
0 0
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
Flow - SCFM
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70
Regulators
3
Flow - dm /s
Filter /
n
Lubricators
Adjustment Knob ..................................................................P04121 Minimum Flow for Lubrication ......................... 1 SCFM at 100 psig
Port Threads............................................................. 1/4, 3/8, 1/2 Inch
Bowl Guard Kit ...................................................................... PS705P
Pressure & Temperature Rating –
Bowl Kits –
Polycarbonate Bowl – 0 to 150 psig (0 to 10.3 bar)
Poly Bowl – No Drain......................................................... PS746P 32°F to 125°F (0°C to 52°C)
Combos
Twist Drain..................................................... PS717P Metal Bowl – 0 to 250 psig (0 to 17.2 bar)
Pressure Fill................................................... PS719P 32°F to 175°F (0°C to 80°C)
Remote Fill..................................................... PS728P
Suggested Lubricant . ..........................................................F442 Oil
Metal Bowl – Sight Gauge / Twist Drain............................... PS729P
Petroleum based oil of 100 to 200 SSU viscosity at 100°F (38°C)
Sight Gauge / Pressure Fill............................ PS720P
Accessories
and an aniline point greater than 200°F (93
Drain Kit – Twist Drain............................................................ PS512P
(DO NOT USE OILS WITH ADDITIVES, COMPOUNDED OILS
Fill Cap Kit.............................................................................. PS742P CONTAINING SOLVENTS, GRAPHITE, DETERGENTS, OR
Lubricator Service Kit .......................................................... PS748P SYNTHETIC OILS.)
Mounting Bracket Kit ........................................................... PS743P Weight ............................................................................ 1.2 lb. (.5 kg)
Oil – 1 Gal.............................................................................F442002
12 Quart Case..............................................................F442003 Materials of Construction
4 Gallon Case...............................................................F442005
Body ............................................................................................. Zinc
Pressure Fill Adapter Kit . ....................................................... PS716P Bowls – Transparent .................................................... Polycarbonate
Pressure Fill Button .................................................................P11912 Metal (With Sight Gauge)................................................ Zinc
Remote Auto-Fill Device ................................................... PS505CP Bowl Guard ................................................................................. Steel
Sight Dome / Fill Cap Kit . ................................................... PS739P Collar .........................................................................................Plastic
Sight Dome Kit ...................................................................... PS740P Drain – Twist – Body & Nut........................................................Plastic
Nylon Sight Dome Kit ...........................................................PS740N Injector Meter Block & Base Assembly ..................................Plastic
Seals ........................................................................................... Nitrile
Sight Dome .................................................................. Polycarbonate
Sight Gauge ........................................................... Polyamide (Nylon)
3/4" — 17L42BE
D D† E
Metal Bowl / Sight Gauge 6.86 6.95 9.09
1/2" 17L34BE — (174) (177) (231)
3/4" 17L44BE — E† F
Regulators
Filter /
9.35 2.75
Standard part numbers shown bold. For other models refer to (237) (70)
ordering information below.
‡ For polycarbonate bowl and sight dome, see Caution on page C2. Inches (mm)
† With Twist Drain.
§ SCFM = Standard cubic feet per minute at 90 psig inlet and 5 psig
Lubricators
pressure drop.
Combos
Ordering Information
17L 2 2 B E —
Accessories
Technical Information
.4 6
C
.3
4
.2 3
2
Flow Characteristics
Selection
.1
Product
17L32B* 1/2 Inch Ports
1 &
17L42B* 3/4 Inch Ports
0 0
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
Flow - SCFM
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70
3
Flow - dm /s
Filters
n
Coalescers
Regulators
Regulators
Filter /
17L Micro-Mist Lubricator Specifications
Kits & Accessories Bowl Capacity ...................................................................4.9 Ounces
Lubricators
Adjustment Knob ..................................................................P04121 Minimum Flow for Lubrication ......................... 1 SCFM at 100 psig
Port Threads ................................................................... 1/2, 3/4 Inch
Bowl Guard Kit ...................................................................... PS805P
Pressure & Temperature Rating –
Bowl Kits –
Polycarbonate Bowl – 0 to 150 psig (0 to 10.3 bar)
Poly Bowl – No Drain......................................................... PS846P 32°F to 125°F (0°C to 52°C)
Combos
Twist Drain...................................................... PS817P Metal Bowl – 0 to 250 psig (0 to 17.2 bar)
Pressure Fill................................................... PS819P 32°F to 175°F (0°C to 80°C)
Remote Fill..................................................... PS828P
Suggested Lubricant . ..........................................................F442 Oil
Metal Bowl – Sight Gauge / Twist Drain............................... PS829P Petroleum based oil of 100 to 200 SSU viscosity at 100°F (38°C)
Sight Gauge / Pressure Fill............................ PS820P
Accessories
and an aniline point greater than 200°F (93°C)
Drain Kit – Twist Drain............................................................ PS512P (DO NOT USE OILS WITH ADDITIVES, COMPOUNDED OILS
Fill Cap Kit.............................................................................. PS742P CONTAINING SOLVENTS, GRAPHITE, DETERGENTS, OR
Lubricator Service Kit .......................................................... PS748P SYNTHETIC OILS.)
Mounting Bracket Kit ........................................................... PS843P Weight ............................................................................ 1.9 lb. (.9 kg)
Oil – 1 Gal..............................................................................F442002
12 Quart Case...............................................................F442003 Materials of Construction
4 Gallon Case...............................................................F442005 Body ............................................................................................. Zinc
Pressure Fill Adapter Kit ..................................................... PS716P Bowls – Transparent .................................................... Polycarbonate
Pressure Fill Button ..............................................................P11912 Metal (With Sight Gauge)................................................ Zinc
Remote Auto-Fill Device ................................................... PS505CP Bowl Guard ................................................................................. Steel
Sight Dome / Fill Cap Kit . ................................................... PS739P Collar ...........................................................................Plastic or Metal
Sight Dome Kit ...................................................................... PS740P Drain – Twist – Body & Nut........................................................Plastic
Nylon Sight Dome Kit ...........................................................PS740N Injector Meter Block & Base Assembly ..................................Plastic
Seals ........................................................................................... Nitrile
Sight Dome .................................................................. Polycarbonate
Sight Gauge ........................................................... Polyamide (Nylon)
C
Selection
Product
Filters
Coalescers
Regulators
Regulators
Filter /
Lubricators
Combos
Accessories
Selection
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
Product
Flow - SCFM
• Compact 06L Series, 1/4, 3/8 and 1/2 Inch Once the required flow is determined for a pneumatic
Filters
• Standard 07L Series, 3/8, 1/2 and 3/4 Inch application the lubricator can be selected by using the
flow chart. To read the lubricator flow chart, first
• Hi-Flow P3NL Series, 3/4, 1 and 1-1/2 Inch determine the inlet pressure that will be used. Find the
• Hi-Flow L606 Series, 3/4, 1, 1-1/4 and appropriate pressure curve on the graph. Each graph
Coalescers
1-1/2 Inch will contain three pressure curves. If the required inlet
pressure is not on the graph, interpolate a similar
• Hi-Flow 09L Series, 2 Inch curve for the required pressure. Next, determine the
acceptable pressure drop across the lubricator and
Regulators
Lubricator Selection locate it on the vertical axis. Find the intersection point
of the acceptable pressure drop and the inlet pressure
1. Determine maximum system flow requirements. curve. At this point follow a vertical path downward to
Regulators
2. Determine maximum allowable pressure drop at view the flow in SCFM.
Filter /
rated flow in SCFM. If the flow is too low, select a larger port size or body
size to give the required flow. If the flow is higher than
3. Refer to flow chart and select lubricator by necessary, select a smaller port size or body size to
choosing the curve that offers minimum
Lubricators
give the required flow.
pressure drop at desired flow in SCFM.
Combos
Accessories
F442 Oil
Lubricators
Mist
These lubricators inject an oil aerosol into the flowing
air stream to automatically provide the proper amount
F
of internal lubrication to air operated tools or other
B C G
pneumatic devices.
A H
Operation
C Air flowing through the unit goes through two paths. E
At low air flow rates, the majority of the air flows
through venturi section (A). The rest of the air slightly D
J
Selection
Product
from the reservoir through the pickup tube (D) past the
check ball (E), to the dome assembly where the rate of D
oil flow is controlled by metering screw (F). Rotation
of the metering screw (F) in the counterclockwise
Coalescers
nozzle tube (H). On the 09L, oil flows through the drip
tube (F) where drops are formed and drip into the
throat section (C). Here it is then broken into fine
particles and mixed with the swirling air to be carried to
Regulators
Filter /
the check ball (J) to nearly seal at (K). When the fill
cap is replaced, the small amount of air flow past
check ball (J) builds up pressure and together with the
spring forces the check ball (J) off seat (K), letting full
line pressure into the bowl.
Features Specifications
• Extends the service life Flow Capacity* (1/4) .................................. 29 SCFM (13.6 dm3 /s)
(3/8) .................................. 30 SCFM (14.2 dm3 /s)
of air operated hand
Operating Temperature..........................32° to 150°F (0° to 65.5°C)
tools.
Maximum Supply Pressure................................. 200 psig (13.8 bar)
• Reduces downtime of Oil Capacity............................................................0.25 oz. (7.4 cm3 )
C
air operated equipment, Port Size............................................................ 1/4, 3/8 NPT / BSPT
saves money. Weight.......................................................................... 0.2 lb. (0.1 kg)
* Inlet pressure 90 psig (6.2 bar). Pressure drop 5 PSID (0.3 bar).
• Small / lightweight.
• Automatic lubrication Materials of Construction
Selection
Product
with air tool operation. Body.................................................................................... Aluminum
• Adjustable oil flow. Seals...........................................................................................Nitrile
• Corrosion resistant. Suggested Lubricant F442 Oil
Petroleum based oil of 100 to 200 SSU viscosity at 100°F (38°C)
Filters
• Full swivel outlet port. and an aniline point greater than 200°F (93°C)
Application (DO NOT USE OILS WITH ADDITIVES, COMPOUNDED OILS
CONTAINING SOLVENTS, GRAPHITE, DETERGENTS, OR
In-Line Lubricators assure proper lubrication for small SYNTHETIC OILS.)
Coalescers
pneumatic hand tools. These in-line lubricators put the
oil source right at the tool. Oil capacity is 1/4 oz. (1 ml),
enough to last through an average 8-hour shift. This
lubricator requires cyclical or intermittent airflow for Replacement Kits
Regulators
proper operation, and consequently works best when Fill Plug Kit – Brass Fill Plug and O-ring............................. PS434
installed at the tool inlet or on a short hose near the O-ring Repair Kit..................................................................... PS435
tool. The 02L cannot be filled under pressure.
Inlet Pressure 02LFB, 02L1B
PSIG
Regulators
30 60 90 120 150
bar 2.4 4.1 6.2 8.2 10.3
Filter /
5
PSID
bar
0.3
4
PRESSURE DROP
C B
Lubricators
3
0.2
0.1
Inlet Outlet 1
Female
Combos
D
0 0
A 0 5 10 15 20 25 30 35 40 SCFM
Dimensions 0 5 10 15 20 dm3/s
Accessories
AIR FLOW RATE
Part Number A B C D
2.65 1.305 1.125 .65 Inlet Pressure 02L2B
02LFB PSIG 30 60 90 120 150
(67) (33) (28.5) (16.5) bar 2.4 4.1 6.2 8.2 10.3
2.93 1.305 1.125 .65 5
PSID
bar
02L1B
(74) (33) (28.5) (16.5)
0.3
3.19 1.305 1.125 .65 4
PRESSURE DROP
02L2B
(81) (33) (28.5) (16.5)
Inches (mm) 3
0.2
0.1
Ordering Information
1
0 0
Female Threads Inlet / Female Threads Inlet /
Port Size SCFM
Female Threads Outlet Male Threads Outlet 0 5 10 15 20 25 30 35 40
C
of delivery rate.
C
• Ideal for low and high flow applications with
changing air flow.
• Transparent sight dome for 360° visibility.
Selection
Product
E
• High Flow: 1/8" – 20 SCFM §
1/4" – 20 SCFM § D
Filters
Distance Required
F To Remove All
Bowls Regardless
Coalescers
Of Drain Option
Poly Bowl ‡ A B C
1.73 1.56 2.16
1/8" — 04L00GB
(44) (40) (55)
1/4" — 04L10GB
D D† E
Metal Bowl without Sight Gauge
Regulators
pressure drop.
Combos
Ordering Information
Accessories
04L 1 0 G B —
Technical Information
Primary Pressure - bar
2.4 bar 6.2 bar 10.3 bar
Primary Pressure - PSIG
35 PSIG 90 PSIG 150 PSIG
10
9
6
C
.4 6
5
.3
4
.2 3
Selection
Product
2
.1
Flow Characteristics
1 04L00G* 1/8 Inch Ports
0 0
0 5 10 15 20 25 30 35 40
Flow - SCFM
Filters
0 2 4 6 8 10 12 14 16 18 20
3
Flow - dm /s
n
Coalescers
Primary Pressure - PSIG
35 PSIG 90 PSIG 150 PSIG
10
9
.6
Regulators
.5
Pressure Drop - PSIG
7
Pressure Drop - bar
.4 6
Regulators
.3
Filter /
4
.2 3
2
.1
Lubricators
Flow Characteristics
1 04L10G* 1/4 Inch Ports
0 0
0 5 10 15 20 25 30 35 40
Flow - SCFM
0 2 4 6 8 10 3 12 14 15 16 20
Flow - dm /s
n
Combos
04L Mist Lubricator Kits & Accessories Suggested Lubricant – . .......................................................F442 Oil
Bowl Kits – Petroleum based oil of 100 to 200 SSU viscosity at 100°F (38°C)
and an aniline point greater than 200°F (93°C).
Poly Bowl – No Drain........................................................ PS421P
Accessories
Twist Drain..................................................... PS420P (DO NOT USE OILS WITH ADDITIVES, COMPOUNDED OILS
CONTAINING SOLVENTS, GRAPHITE, DETERGENTS, OR
Metal Bowl – Twist Drain (No Sight Gauge)......................PS447BP SYNTHETIC OILS.)
Mounting Bracket Kit ............................................................. PS419 Weight .........................................................................0.4 lb. (0.18 kg)
Oil – 1 Gal..............................................................................F442002
12 Quart Case...............................................................F442003
4 Gallon Case...............................................................F442005
Materials of Construction
Body ............................................................................................. Zinc
Specifications Bowls – Transparent.................................................... Polycarbonate
Bowl Capacity ........................................................................1 Ounce Metal (Without Sight Gauge).......................................... Zinc
Minimum Flow for Lubrication ....................... 0.5 SCFM at 100 psig Drains – Twist – Body & Nut......................................................Plastic
Port Threads ................................................................... 1/8, 1/4 Inch
Seals ........................................................................................... Nitrile
Pressure & Temperature Ratings –
Polycarbonate Bowl – 0 to 150 psig (0 to 10.3 bar) Sight Dome ................................................................. Polycarbonate
32°F to 125°F (0°C to 52°C)
Metal Bowl – 0 to 250 psig (0 to 17.2 bar)
32°F to 175°F (0°C to 80°C)
C
delivery rate.
• Bowl can be filled while air line is under pressure.
• Transparent sight dome for 360° visibility. E
Selection
3/8" – 60 SCFM §
1/2" – 90 SCFM §
Distance Required
Filters
F To Remove All
Bowls Regardless
Of Drain Option
3/8" — 06L22BE
D D† E
1/2" — 06L32BE 5.58 5.69 7.82
Metal Bowl / Sight Gauge (142) (145) (199)
1/4" 06L14BE — E† F
Regulators
Filter /
pressure drop.
Combos
Ordering Information
06L 1 2 B E —
Accessories
Technical Information
Primary Pressure - bar Primary Pressure - bar
2.4 bar 6.2 bar 10.3 bar 2.4 bar 6.2 bar 10.3 bar
Primary Pressure - PSIG Primary Pressure - PSIG
35 PSIG 90 PSIG 150 PSIG 35 PSIG 90 PSIG 150 PSIG
7 7
.4 6 6
.4
Pressure Drop - PSIG
.2 3 .2 3
.1
2
1
Flow Characteristics
.1
2
1
Flow Characteristics
C
06L12B* 1/4 Inch Ports 06L22B* 3/8 Inch Ports
0 0 0 0
0 10 20 30 40 50 60 70 0 10 20 30 40 50 60 70 80 90 100
Selection
Flow - SCFM Flow - SCFM
Product
0 5 10 15 20 25 30 0 5 10 15 20 25 30 35 40 45
3 3
Flow - dm /s Flow - dm /s
n n
Primary Pressure - bar
2.4 bar 6.2 bar 10.3 bar
Primary Pressure - PSIG
Filters
35 PSIG 90 PSIG 150 PSIG
7
.4 6
Pressure Drop - PSIG
Pressure Drop - bar
Coalescers
.3
4
.2 3
Regulators
.1
1
Flow Characteristics
06L32B* 1/2 Inch Ports
0 0
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
Flow - SCFM
Regulators
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70
Filter /
3
Flow - dm /s
n
Lubricators
Bowl Guard Kit ..................................................................... PS705P Minimum Flow for Lubrication......................... .5 SCFM At 100 psig
Bowl Kits – Port Threads ............................................................ 1/4, 3/8, 1/2 Inch
Poly Bowl – No Drain........................................................ PS746P Pressure & Temperature Rating –
Twist Drain..................................................... PS717P Polycarbonate Bowl – 0 to 150 psig (0 to 10.3 bar)
Pressure Fill.................................................. PS719P 32°F to 125°F (0°C to 52°C)
Combos
Remote Fill.................................................... PS728P Metal Bowl – 0 to 250 psig (0 to 17.2 bar)
Metal Bowl – Sight Gauge / Twist Drain.............................. PS729P 32°F to 175°F (0°C to 80°C)
Sight Gauge / Pressure Fill........................... PS720P Suggested Lubricant . ..........................................................F442 Oil
Drain Kit – Twist Drain............................................................ PS512P Petroleum based oil of 100 to 200 SSU viscosity at 100°F (38°C)
Accessories
and an aniline point greater than 200°F (93°C)
Fill Cap Kit.............................................................................. PS741P
(DO NOT USE OILS WITH ADDITIVES, COMPOUNDED OILS
Lubricator Service Kit .......................................................... PS718P CONTAINING SOLVENTS, GRAPHITE, DETERGENTS, OR
Mounting Bracket Kit ........................................................... PS743P SYNTHETIC OILS.)
Oil – 1 Gal..............................................................................F442002 Weight .......................................................................... 1.2 lb. (0.5 kg)
12 Quart Case...............................................................F442003
4 Gallon Case...............................................................F442005 Materials of Construction
Pressure Fill Adapter Kit ..................................................... PS716P Body ............................................................................................. Zinc
Pressure Fill Button ..............................................................P11912 Bowls – Transparent . .................................................. Polycarbonate
Remote Auto-Fill Device ................................................... PS505CP Metal (With Sight Gauge)............................................... Zinc
Sight Dome / Fill Cap Kit . ................................................... PS738P Bowl Guard ................................................................................. Steel
Sight Dome Kit ...................................................................... PS740P Collar .........................................................................................Plastic
Drain – Twist – Body & Nut........................................................Plastic
Nylon Sight Dome Kit ...........................................................PS740N
Injector Meter Block & Base Assembly ..................................Plastic
Seals ........................................................................................... Nitrile
Sight Dome .................................................................. Polycarbonate
Sight Gauge ........................................................... Polyamide (Nylon)
C
delivery rate.
• Bowl can be filled while air line is under pressure.
• Transparent sight dome for 360° visibility. E
Selection
3/4" – 90 SCFM §
Distance Required
Filters
F To Remove All
Bowls Regardless
Of Drain Option
3/4" — 07L42BE
D D† E
Metal Bowl / Sight Gauge 6.86 6.95 9.09
1/2" 07L34BE — (174) (177) (231)
3/4" 07L44BE — E† F
Regulators
Filter /
9.35 2.75
Standard part numbers shown bold. For other models refer to (237) (70)
ordering information below.
‡ For polycarbonate bowl and sight dome, see Caution on page C2. Inches (mm)
† With Twist Drain.
§ SCFM = Standard cubic feet per minute at 90 psig inlet and 5 psig
Lubricators
pressure drop.
Combos
Ordering Information
07L 2 2 B E —
Accessories
Technical Information
.4 6
C
.3
4
.2 3
Selection
Flow Characteristics
Product
.1
07L32B* 1/2 Inch Ports
1 &
07L42B* 3/4 Inch Ports
0 0
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
Flow - SCFM
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70
Filters
3
Flow - dm /s
n
Coalescers
Regulators
Regulators
Filter /
07L Mist Lubricator Kits & Accessories Specifications
Adjustment Knob ..................................................................P04121 Bowl Capacity ...................................................................6.0 Ounces
Lubricators
Bowl Guard Kit ...................................................................... PS805P Minimum Flow for Lubrication......................... .5 SCFM At 100 psig
Bowl Kits – Port Threads.................................................................... 1/2, 3/4 Inch
Poly Bowl – No Drain......................................................... PS846P Pressure & Temperature Rating –
Twist Drain..................................................... PS817P Polycarbonate Bowl – 0 to 150 psig (0 to 10.3 bar)
Pressure Fill................................................... PS819P 32°F to 125°F (0°C to 52°C)
Combos
Remote Fill..................................................... PS828P Metal Bowl – 0 to 250 psig (0 to 17.2 bar)
Metal Bowl – Sight Gauge / Twist Drain............................... PS829P 32°F to 175°F (0°C to 80°C)
Sight Gauge / Pressure Fill............................ PS820P Suggested Lubricant . ..........................................................F442 Oil
Drain Kit – Twist Drain............................................................ PS512P Petroleum based oil of 100 to 200 SSU viscosity at 100°F (38°C)
Accessories
Fill Cap Kit.............................................................................. PS741P and an aniline point greater than 200°F (93°C).
Lubricator Service Kit .......................................................... PS718P (DO NOT USE OILS WITH ADDITIVES, COMPOUNDED OILS
CONTAINING SOLVENTS, GRAPHITE, DETERGENTS, OR
Mounting Bracket Kit ........................................................... PS843P
SYNTHETIC OILS.)
Oil – 1 Gal..............................................................................F442002
Weight .......................................................................... 1.9 lb. (0.9 kg)
12 Quart Case...............................................................F442003
4 Gallon Case...............................................................F442005 Materials of Construction
Pressure Fill Adapter Kit ..................................................... PS716P
Body ............................................................................................. Zinc
Pressure Fill Button ..............................................................P11912
Bowls – Transparent..................................................... Polycarbonate
Remote Auto-Fill Device ................................................... PS505CP Metal (With Sight Gauge)................................................ Zinc
Sight Dome / Fill Cap Kit . ................................................... PS738P Bowl Guard ................................................................................. Steel
Sight Dome Kit ...................................................................... PS740P Collar ...........................................................................Plastic or Metal
Nylon Sight Dome Kit ...........................................................PS740N Drain – Twist – Body & Nut........................................................Plastic
Injector Meter Block & Base Assembly ..................................Plastic
Seals ........................................................................................... Nitrile
Sight Dome .................................................................. Polycarbonate
Sight Gauge ........................................................... Polyamide (Nylon)
D
1" – 250 SCFM §
1-1/2" – 260 SCFM §
m s
Filters
t e
Distance Required
i
F To Remove All
t
Bowls
u
Coalescers
Port
e d o t e
NPT P3NL Lubricator
e
Dimensions
y
Size
l
No Drain
a o
A APB B
Gr e obs
Metal Bowl / Sight Gauge
Regulators
ar
1-1/2" # P3NLA9PLSN 2.81 9.00 11.81
Regulators
Ordering Information
Accessories
P3N L a 9 8 L s N
Engineering Port Type Port Size Type Bowl Drain / Fill Device
Level 1* G Thread 6 3/4" (w/o Oil Mist S Metal Bowl w/ A Auto Fill /
A Current (BSPP) Female Port Blocks) L w/ Polycarbonate Sight Gauge Fill Plug
2 Rc Thread 8 1" (w/o Sight Dome N No Drain, Solid
(BSPT) Female Port Blocks) A w/ Nylon Bowl / Fill Plug
9 NPT Female P 1-1/2" Port Sight Dome M Twist Drain /
Blocks (w/ 1" Fill Plug
* 3/4 & 1 inch meet ISO
Ported Body) H No Drain / Body
1179-1 Standard.
Pressure Fill
J Twist Drain / Body
Note: BSPP ported units supplied using NPT ported bodies and BSPP port block kits. Pressure Fill
BOLD ITEMS ARE MOST POPULAR.
Technical Information
Primary Pressure - bar Primary Pressure - bar
2.4 bar 6.2 bar 10.3 bar 2.4 bar 6.2 bar 10.3 bar
Primary Pressure - PSIG Primary Pressure - PSIG
35 PSIG 90 PSIG 150 PSIG 35 PSIG 90 PSIG 150 PSIG
10 10
9 9
.6 .6
8
.5 .5
7 7
.4 6 .4 6
C
5 5
.3 .3
4 4
.2 3 .2 3
2 2
.1 Flow Characteristics .1 Flow Characteristics
Selection
1 1
Product
P3NL 3/4 Inch Ports P3NL 1 Inch Ports
0 0 0 0
0 100 200 300 400 500 600 0 100 200 300 400 500 600 700
Flow - SCFM Flow - SCFM
Filters
Primary Pressure - bar
2.4 bar 6.2 bar 10.3 bar
Primary Pressure - PSIG
10
35 PSIG 90 PSIG 150 PSIG
Coalescers
9
.6
8
Pressure Drop - PSIG
Pressure Drop - bar
.5
7
.4 6
Regulators
.3
4
.2 3
2
.1 Flow Characteristics
1
P3NL 1-1/2 Inch Ports
Regulators
0 0
Filter /
0 100 200 300 400 500 600 700
Flow - SCFM
0 50 100 150 200 250 300
Flow - dm3 /s
n
Lubricators
P3NL Lubricator Kits & Accessories Specifications
Adjustment Knob .................................................................. P04121 Bowl Capacity ................................................................ 18.0 Ounces
Bowl Kits – Minimum Flow for Lubrication....................... 6.6 SCFM at 100 psig
Combos
Metal Bowl – Sight Gauge / Twist Drain................... P3NKA00BSM Pressure & Temperature Rating ............ 0 to 250 psig (0 to 17.2 bar)
Metal Bowl – Sight Gauge / No Drain...................... P3NKA00BSN 32°F to 175°F (0°C to 80°C)
Bowl Latch Kit .......................................................................C11A33 Suggested Lubricant . ......................................................... F442 Oil
Drain Kit – Twist Drain........................................................... PS512P
Accessories
Petroleum based oil of 100 to 200 SSU viscosity at 100°F (38°C)
Fill Cap Kit ...................................................................... P3NKA00PL and an aniline point greater than 200°F (93°C).
Sight Dome Kit – Polycarbonate........................................... PS740P (DO NOT USE OILS WITH ADDITIVES, COMPOUNDED OILS
Nylon.........................................................PS740N CONTAINING SOLVENTS, GRAPHITE, DETERGENTS, OR
Sight Gauge Kit ..............................................................P3NKA00PE SYNTHETIC OILS.)
Pressure Fill Adapter Kit ...............................................P3NKA00PK Weight – 3/4 Inch..........................................................3.5 lb. (1.6 kg)
1 Inch.............................................................3.5 lb. (1.6 kg)
Service Kit ......................................................................P3NKA00RL
1-1/2 Inch† ....................................................4.6 lb. (2.1 kg)
Mounting Bracket Kit* .................................................. P3NKA00MW
Oil – 1 Gal.............................................................................F442002 Materials of Construction
12 Quart Case..............................................................F442003 Body, Bowl .......................................................................... Aluminum
4 Gallon Case..............................................................F442005
Drains: Twist Drain (Optional)....................................................Plastic
Injector Meter Block & Base Assembly ..................................Plastic
Seals ........................................................................................... Nitrile
Sight Dome .................................................................. Polycarbonate
Sight Gauge ........................................................... Polyamide (Nylon)
* If 1-1/2 BSPP E02 fittings are required, use P3NKA0BMW. † 1" Port Body with 1-1/2" Port Block.
2
8
3
7
6 4
5
B
• High Flow: 3/4" - 325 SCFM§
1" - 350 SCFM§
Coalescers
pressure drop.
Ordering Information
Accessories
L 606 — 06 W /M8
F
.3
4
2
8
3
7
6 4
5
3
.2
A 2
D .1
C
7 6 5 4 3 3 2 1 0 9
1 Flow Characteristics
F606-06W
C 3/4-inch Port
0 0
0 50 100 150 200 250 300 350 400 450
Flow - SCFM
Selection
Product
0 20 40 60 80 100 120 140 160 180 200
Flow - dmn3/s
E
Primary Pressure - bar
1.7 3.4 5.2 6.9 10.3
B
Primary Pressure - PSIG
Filters
25 50 75 100 150
5
.3
4
Coalescers
3
Add 9/16" For X9 Option .2
2
L606-08G
.1
Regulators
1 Flow Characteristics
F606-08W
1-inch Port
L606 Lubricator Kits & Accessories 0 0
0 50 100 150 200 250 300 350 400 450
Adjusting Knob .....................................................................606Y72 Flow - SCFM
Regulators
Bowl Kits – 0 20 40 60 80 100 120 140 160 180 200
Filter /
Aluminum (E) ..................................................................... BK603B Flow - dmn3/s
Aluminum with Sight Gauge (G) ..................................BK606X30B
Zinc with Sight Gauge (W) . ............................................BK609WB
Button Head Fill Fitting (M14 male thread) .......................L606C14
Lubricators
Zinc Bowl with
Dip Tube Kit .......................................................................... DTK606 Nylon Sight Gauge (W)....................... 0 to 250 psig (0 to 17.2 bar)
Drip Spout Kit . .................................................................. RK606SY 40°F to 150°F (4.4°C to 65.6°C)
Mounting Bracket – Weight –
3/4 Inch units (2 required per unit) .............................SA200AW57 Aluminum Bowl (E)........................................5.5 lb. (2.49 kg) / Unit
Combos
1 Inch units (2 required per unit) ............................... SA200CW57 22.3 lb. (10.12 kg) / 4-Unit Master Pack
Oil – 1 Gal............................................................................... F442002 Aluminum Bowl with
12 Quart Case................................................................ F442003 Polycarbonate Sight Gauge (G) ...................7.2 lb. (3.27 kg) / Unit
4 Gallon Case................................................................ F442005 28.8 lb. (13.06 kg) / 4-Unit Master Pack
Accessories
Repair Kits – Zinc Bowl with
Needle Valve Assembly (All) ............................................. RK606Y Nylon Sight Gauge (W).................................. 4.2 lb. (1.91 kg) / Unit
Sight Gauge Bowl Repair Kit (W) ................................RKB605WB 16.6 lb. (7.53 kg) / 4-Unit Master Pack
Sight Gauge Bowl Repair Kit (G) . ............................RKB606X30B
Suggested Lubricant . ......................................................... F442 Oil
Specifications Petroleum based oil of 100 to 200 SSU viscosity at 100°F (38°C)
and an aniline point greater than 200°F (93°C).
Bowl Capacity –
(DO NOT USE OILS WITH ADDITIVES, COMPOUNDED OILS
Aluminum (E) .................................................................32 Ounces
CONTAINING SOLVENTS, GRAPHITE, DETERGENTS, OR
Aluminum with Polycarbonate Sight Gauge (G) ...........64 Ounces
SYNTHETIC OILS.)
Zinc with Nylon Sight Gauge (W) .................................. 16 Ounces
Port Threads . ................................................................... 3/4, 1 Inch Materials of Construction
Pressure & Temperature Ratings – Body ..............................................................................................Zinc
Aluminum Bowl (E)..............................0 to 300 psig (0 to 20.4 bar) Bowls –
40°F to 150°F (4.4°C to 65.6°C) (E)..................................................................................... Aluminum
Aluminum Bowl with (G)............................... Aluminum with Polycarbonate Sight Gauge
Polycarbonate Sight Gauge (G) ......... 0 to 150 psig (0 to 10.2 bar) (W)..................................................... Zinc with Nylon Sight Gauge
40°F to 125°F (4.4°C to 52°C) Seals ....................................................................................... Buna N
2
8
3
7
6 4
5
C
• Large Capacity Bowl
Selection
Product
pressure drop.
Ordering Information
Accessories
L 606 — 10 W /M8
6 4
5
3
.2
A 2
D
C
7 6 5 4 3 3 2 1 0 9 .1
1
Flow Characteristics
C L606-10W
1-1/4-inch Port
0 0
0 50 100 150 200 250 300 350 400 450
Selection
Flow - SCFM
Product
0 20 40 60 80 100 120 140 160 180 200
Flow - dmn3/s
E
Filters
B Primary Pressure - bar
1.7 3.4 5.2 6.9 10.3
Primary Pressure - PSIG
25 50 75 100 150
5
Coalescers
.3
4
Regulators
L606-12G 2
Regulators
1-1/2-inch Port
Bowl Kits –
Filter /
0 0
0 50 100 150 200 250 300 350 400 450
Aluminum (E) ..................................................................... BK603B Flow - SCFM
Aluminum with Sight Gauge (G) ..................................BK606X30B
Zinc with Sight Gauge (W) . ............................................BK609WB 0 20 40 60 80 100 120 140 160 180 200
Flow - dmn3/s
Lubricators
Button Head Fill Fitting (M14 male thread) .......................L606C14
Dip Tube Kit .......................................................................... DTK606
Drip Spout Kit . .................................................................. RK606SY
Weight –
Oil – 1 Gal............................................................................... F442002 Aluminum Bowl (E)........................................8.3 lb. (3.76 kg) / Unit
12 Quart Case................................................................ F442003
Combos
33.2 lb. (15.06 kg) / 4-Unit Master Pack
4 Gallon Case................................................................ F442005
Aluminum Bowl with
Repair Kits – Polycarbonate Sight Gauge (G).....................10 lb. (4.54 kg) / Unit
Needle Valve Assembly (All) ............................................. RK606Y 40 lb. (18.14 kg) / 4-Unit Master Pack Zinc Bowl with
Sight Gauge Bowl Repair Kit (W) ................................RKB605WB
Accessories
Sight Gauge Bowl Repair Kit (G) . ............................RKB606X30B Nylon Sight Gauge (W)................................. 7.5 lb. (3.40 kg) / Unit
28.2 lb. (12.79 kg) / 4-Unit Master Pack
Specifications Suggested Lubricant . ......................................................... F442 Oil
Bowl Capacity – Petroleum based oil of 100 to 200 SSU viscosity at 100°F (38°C)
Aluminum (E) .................................................................32 Ounces and an aniline point greater than 200°F (93°C).
Aluminum with Polycarbonate Sight Gauge (G) ...........64 Ounces (DO NOT USE OILS WITH ADDITIVES, COMPOUNDED OILS
Zinc with Nylon Sight Gauge (W) .................................. 16 Ounces CONTAINING SOLVENTS, GRAPHITE, DETERGENTS, OR
Port Threads............................................................. 1-1/4, 1-1/2 Inch SYNTHETIC OILS.)
Pressure & Temperature Ratings –
Aluminum Bowl (E)..............................0 to 300 psig (0 to 20.4 bar)
40°F to 150°F (4.4°C to 65.6°C) Materials of Construction
Aluminum Bowl with Body .............................................................................................Zinc
Polycarbonate Sight Gauge (G).......... 0 to 150 psig (0 to 10.2 bar) Bowls –
40°F to 125°F (4.4°C to 52°C) (E)..................................................................................... Aluminum
Zinc Bowl with (G)............................... Aluminum with Polycarbonate Sight Gauge
Nylon Sight Gauge (W)........................ 0 to 250 psig (0 to 17.2 bar) (W)..................................................... Zinc with Nylon Sight Gauge
40°F to 150°F (4.4°C to 65.6°C) Seals ....................................................................................... Buna N
C pressure.
• Proportional oil delivery over a wide range
A
C
A
C
of air flows.
§
Selection
PRESS
E E
TURN
B B
Filters
Coalescers
— —
(140) (264) (67) (331)
Metal Bowl / Sight Gauge – 3 Quart
A B C D E
2" 09L8PBA
3 Qt. 5.50 9.44 2.64 6.00 12.08 7.12
Standard part numbers shown bold. For other models refer to (140) (240) (67) (152) (307) (181)
Regulators
Filter /
Ordering Information
Accessories
09L 8 4 B A —
Technical Information
.3 4
Selection
2
Product
.1
1
Flow Characteristics
09L8PB* 2 Inch Ports
0
Filters
0
0 200 400 600 800 1000 1200 1400 1400
Flow - SCFM
0 100 200 300 400 500 600 700
3
Flow - dm /s
Coalescers
n
Regulators
Regulators
Filter /
Lubricators
Combos
09L Lubricator Kits & Accessories Specifications
Fill Cap Kit.............................................................................. PS610P Bowl Capacity ............................................................1 Qt. (Standard)
Lubricator Service Kit ........................................................... PS607P 3 Qt. (Optional)
Accessories
Metal Bowl – Sight Gauge / Twist Drain................................PS612P* Bowl................................................................Metal with Sight Gauge
Materials of Construction
Body ....................................................................Zinc Alloy, Die Cast
SUP
PLY Dimensions
AIR
Filters
Inches (mm)
OIL
SUPPLY
Regulators
Operation Oil enters the unit at the pipe thread fitting (A) with a supply pressure that is a minimum of
20 psig above the lubricator air pressure. With the float lowered, oil flows through metering
orifice (B) and lifts the check ball (C). Oil continues to flow past the shuttle chamber
annulus (D) and out the cross drilled hole (E). As the oil level rises, it cause the float to rise
Regulators
to its maximum level in the bowl. During this period the shut-off ball (F) remains in chamber
Filter /
(G), out of the flow stream. Near the end of the filling period, shut-off ball (F) will enter the
flow stream and snap shut against the seat in chamber (G).
The stem assembly will thus block any additional oil passage as long as the oil supply
Lubricators
pressure is maintained at (A). When the supply pressure at (A) is released, ball (C) is held
E
up against the shuttle (D) by a spring causing a slight delay in reverse flow shut-off. This
G F permits the higher still present supply pressure in chamber (G) to dissipate and bowl
C D pressure to take over. The shuttle then moves down forcing ball (C) to close orifice (B).
B The orifice will remain closed as long as there is air pressure in the bowl.
Combos
A This delay of reverse flow in chamber (G) is necessary to allow shut-off ball (F) to fall when
the oil level decreases and permit oil to enter the bowl for the next refill. Thus, for the unit to
operate properly, it is necessary that the oil supply pressure go to zero after each fill.
Accessories
Selection
Product
Filters
Coalescers
Regulators
Regulators
Filter /
Lubricators
Combos
Accessories
Two-Unit
Combo
A D F
C
C
Selection
Product
B
Filters
Coalescers
Three-Unit
Lubricators
Combo
A D F
Combos
C
Accessories
14A 1 1 B 13 F 0 G *
Selection
Product
5 Automatic Pulse 10 30 psig 0 No Drain F Current - 14A
Drain 11 60 psig 1 Twist Drain
Port Size 12 15 psig Metal Bowl Lubricator Body
Metal Bowl
13 125 psig 3 Twist Drain Options
0 1/8 Inch 3 Twist Drain
With Gauge G No Fill Plug
Filters
1 1/4 Inch 7 Automatic Pulse
Drain 15 30 psig
16 60 psig
17 15 psig
Coalescers
18 125 psig
Regulators
B 5 Micron G Non-Relieving
CAUTION:
REGULATOR PRESSURE ADJUSTMENT – The working range
of knob adjustment is designed to permit outlet pressures within ! WARNING
Regulators
their full range. Pressure adjustment beyond this range is also Product rupture can cause serious injury.
Filter /
possible because the knob is not a limiting device. This is a common
Do not connect regulator to bottled gas.
characteristic of most industrial regulators, and limiting devices may
be obtained only by special design.
Do not exceed maximum primary pressure rating.
For best performance, regulated pressure should always be set by
Lubricators
increasing the pressure up to the desired setting. For polycarbonate bowl and sight dome, see Caution on page C2.
E E
B B
F F
D
Combos
G D G
J K Typ. K Typ.
J
H H
A A
C F
Accessories
C F
M
L M
L
PS417BP PS419
(Includes Panel Mount Nut)
Dimensions
A B C D E F G H J K L M Kit
1.80 2.37 0.90 1.35 1.00 0.50 0.20 1.24 0.56 0.22 0.45 0.62 PS417BP
(46) (60) (23) (34) (25) (13) (5) (31) (14) (6) (11) (16) (10F, 14F, P3A, 14R, 14E)
1.80 2.17 0.90 1.35 1.00 0.50 0.20 1.24 0.56 0.22 0.45 0.62 PS419
(46) (55) (23) (34) (25) (13) (5) (31) (14) (6) (11) (16) (04L)
Inches (mm)
Two-Unit
Combo
C
A D F
C
Selection
Product
m s
B
Filters
t it e
u
Coalescers
Series
e d o t e
Port Model Numbers A b C D E f
y e
4.49 5.35 3.16 2.05 8.50 1.03
l
1/4" 15G12A13A2N*
a
(114) (136) (80) (52) (216) (26)
o
15G
Gr e obs
Regulators
ar
Regulators
Filter /
Three-Unit
Lubricators
Combo
A D F
Combos
C
Accessories
E
B
15A 1 2 A 13 A 2 N E
Selection
Product
10 30 psig
11 60 psig
Filter Element Relief
13 125 psig
s
A 40 Micron 14 § A Relieving
200 psig
m
B 5 Micron H Low Temp.
With Gauge * Lubricator Body
Filters
e
Relieving
Options
t
17 30 psig
i
J Low Temp
Filter Bowl Options 16 60 psig Non-Relieving B With Fill Plug
t
18 125 psig F With Body
u
Poly Bowl L Non-Relieving
Coalescers
Pressure Fill
o
19§ 200 psig
1 Twist Drain
e
N No Fill Plug
d
* Includes 1-1/2" Dial
t
2 Metal Bowl Guard /
e e
Twist Drain Face Gauge
y l
§ Metal Bowls Only Lubricator Bowl Options
a
N Automatic Pulse Drain
Gr e obs o
Regulators
P Metal Bowl Guard / Poly Bowl
Automatic Pulse Drain 1 No Drain
2 Metal Bowl Guard /
Metal Bowl
No Drain
3 Twist Drain
ar
5 Pressure Fill
Regulators
4 Sight Gauge /
Filter /
Twist Drain 6 Metal Bowl Guard /
R Automatic Pulse Drain Pressure Fill
T Sight Gauge / Metal Bowl / Sight Gauge
Automatic Pulse Drain 4 Twist Drain
Lubricators
8 Pressure Fill
CAUTION:
Combos
! WARNING
REGULATOR PRESSURE ADJUSTMENT – The working Product rupture can cause serious injury.
range of knob adjustment is designed to permit outlet Do not connect regulator to bottled gas.
pressures within their full range. Pressure adjustment beyond Do not exceed maximum primary pressure rating.
Accessories
this range is also possible because the knob is not a limiting
device. This is a common characteristic of most industrial
regulators, and limiting devices may be obtained only by
special design.
For best performance, regulated pressure should always be
For polycarbonate bowl and sight dome, see Caution on page C2.
set by increasing the pressure up to the desired setting.
Kits & Accessories (See individual component sections for other kits and accessories.)
Two-Unit A1
Combo J
D F
C
A
(Without
Port Blocks)
C
Selection
Product
H
G
E
m s
Filters
e
B .280 x .430
it
(7mm x 11mm)
Slot
ut
Coalescers
e d o t e
e
Series Port Model Numbers A A1 B C D E F
y l
4.33 6.38 5.35 3.15 2.05 8.50 1.45
a
15H12A13A2N*
o
1/4"
Gr e obs
(110) (162) (136) (80) (52) (216) (37)
Regulators
15H
3/8" 15H22A13A2N* G H J
For other models, refer to ordering information on next page. 2.60 1.14 4.72
(66) (29) (120)
ar
Inches (mm)
Regulators
Filter /
Three-Unit
Lubricators
Combo A1
A D F
(Without Port Blocks)
J
Combos
C
H
G
Accessories
B .280 x .430
(7mm x 11mm)
Slot
15B 1 2 A 13 A 2 N E —
Selection
Product
Relieving A With Mounting
J Low Temp Bracket &
Non-Relieving Port Block
s
L Non-Relieving Lubricator Body B With Mounting
m
Options Bracket,
Filters
e
B With Fill Plug Lockout &
t
Filter Bowl Options Regulator
i
Pressure F With Body Port Block
Poly Bowl
t
Pressure Fill C With Mounting
u
1 Twist Drain Without Gauge
N No Fill Plug
Coalescers
Bracket &
o
2 Metal Bowl Guard / 10 30 psig
Lockout
d e
Twist Drain 11 60 psig
e t
Lubricator Bowl Options G With Port
e
N Automatic Pulse Drain 13 125 psig
y l
§ Blocks
P Metal Bowl Guard / 14
200 psig
a
Poly Bowl
o
J With Lockout
Gr e obs
Regulators
Automatic Pulse With Gauge * 1 No Drain
Drain (No Port
17 30 psig 2 Metal Bowl Guard / Blocks)
Metal Bowl No Drain
16 60 psig
3 Twist Drain K With Lockout
18 125 psig 5 Pressure Fill
and Port
ar
4 Sight Gauge / 6 Metal Bowl Guard /
19§ 200 psig
Regulators
Twist Drain Blocks
Filter /
Pressure Fill
R Automatic Pulse Drain * Includes 1-1/2" Dial
Metal Bowl / Sight Gauge W With Mounting
T Sight Gauge / Face Gauge Bracket
4 Twist Drain
Automatic Pulse Drain § Metal Bowls Only
8 Pressure Fill
Lubricators
BOLD ITEMS ARE MOST POPULAR.
CAUTION:
Combos
! WARNING
REGULATOR PRESSURE ADJUSTMENT – The working Product rupture can cause serious injury.
range of knob adjustment is designed to permit outlet Do not connect regulator to bottled gas.
pressures within their full range. Pressure adjustment beyond Do not exceed maximum primary pressure rating.
Accessories
this range is also possible because the knob is not a limiting
device. This is a common characteristic of most industrial
regulators, and limiting devices may be obtained only by
special design.
For best performance, regulated pressure should always be
set by increasing the pressure up to the desired setting. For polycarbonate bowl and sight dome, see Caution on page C2.
Kits & Accessories (See individual component sections for other kits and accessories.)
Body Connector Kit .............................................................. PS954P Port Block Kits: 1/8" 1/4" 3/8"
Lockout Valve .................................................................... PS95601P NPT .................... PS95000P........ PS95001P......... PS95002P
Manifold Block ................................................................... PS95701P
BSPP ................. PS95010P........PS95011P*........ PS95012P*
Pressure Switches –
DIN Connectors....................................................................P01909 BSPT ................. PS95020P........ PS95021P......... PS95022P
Flying Leads.........................................................................P01908
Wall Mounting Kit .................................................................. PS955P * 1/4 & 3/8 inch meet ISO 1179-1 Standard.
C
Selection
Product
m s
Filters
t it e
u
Coalescers
e d o t e
ay ol e
Gr e obs
Regulators
ar
Regulators
Filter /
BSPT ......PS95020P......... PS95021P.........PS95022P
* 1/4 & 3/8 inch meet ISO 1179-1 Standard.
Body Connectors
PS954P
Combos
Accessories
Body Connectors allow you to easily assemble and Port Block Connectors allow you to make threaded port
disassemble Modular Combinations. connections to Modular units and are available
Body Connectors are required whenever you assemble two in various port sizes to match your system requirements.
or more pieces together. Each Kit includes all the necessary pieces to make two
Each Kit includes one set. port connections.
C
1.06
.85 (27)
(22) 2.09 1.17
.28 (7) 1.41 (53) (30)
(36) .58
Typ. 2.28 (15)
(58)
2.87 1.14 3.15
Selection
1.65 (42) (73) (29)
Product
(80) 1/4" Port
Dia.Thru
2 Places 1.38
1.13
(29) (35)
s
.83 .56
m
(21) (14)
Filters
e
.22 (6)
it
.43 (11) Typ. A Modular Manifold Block can be used between any
Typ.
two Modular units to give additional outlet ports. The
ut
1/4" Manifold Block provides three additional outlets. Any
Wall Mounting Kits are available for mounting your Modular
Coalescers
o
standard pipe plug can be used to close off unused ports.
Assemblies and can be assembled and used with any
d t e
standard body connector set. NOTE: Body Connectors are not supplied with Manifold Blocks.
ye l e
Since Modular Combinations are always identical in size,
a o
you can predrill for wall mounting on your equipment.
Gr e obs
Regulators
Kit includes 1 assembly.
ar
Regulators
Lockout Valve
Filter /
PS95601P
1/4" Port
Lubricators
1.65
(42)
1.06
2.09 (27)
(53)
Combos
1.93
Accessories
(49)
.83 .56
(21) (14)
Two-Unit
Combo A D F
C
C
E
Selection
Product
B
Filters
Series
Model
Port
Model
Series
06G, 16G Series
Numbers Numbers
A b C D E f
Coalescers
Three-Unit
Combo
Lubricators
A D F
C
Combos
E
Accessories
Series
Model
Port
Model
Series
06A, 16A Series
Numbers Numbers
A b C D E f
06A12A13A2BC 1/4" 16A12A13A2BC 9.45 5.69 2.24 3.18 7.93 1.37
(240) (145) (57) (81) (201) (35)
06A 06A22A13A2BC 3/8" 16A22A13A2BC 16A
07A, 17A Series
06A32A13A2BC 1/2" 16A32A13A2BC
A b C D E f
07A32A13A2BD 1/2" 17A32A13A2BD 10.74 6.97 2.41 3.44 9.38 1.63
07A 17A
07A42A13A2BD 3/4" 17A42A13A2BD (2738) (177) (61) (87) (238) (41)
For other models, refer to ordering information on next page. Inches (mm)
• All dimensions nominal.
16A 1 2 A 13 A 1 B C
Selection
Product
17A Standard 3-Unit 3 1/2 Inch F With Body 06A, 16A,
16G Compact 2-Unit 4 3/4 Inch** Pressure Fill 06G, 16G
17G Standard 2-Unit * Available on D Current -
Mist 06/16 Series 07A, 17A,
06A Compact 3-Unit
only. 07G, 17G
Filters
** Available on
07A Standard 3-Unit 07/17 Series
06G Compact 2-Unit only.
07G Standard 2-Unit
Coalescers
Filter Bowl Options Regulator Lubricator Bowl Options
Poly Bowl Pressure Poly Bowl
2 Metal Bowl Guard / Twist Drain Without Gauge 2 Metal Bowl Guard / No Drain
6 Metal Bowl Guard / 11 60 psig 6 Metal Bowl Guard / Pressure Fill
Regulators
Automatic Float Drain 13 125 psig K Metal Bowl Guard / Auto Fill
Metal Bowl 15* 250 psig N Metal Bowl Guard / Twist Drain
3 Twist Drain With Gauge Metal Bowl / Sight Gauge
4 Sight Gauge / Twist Drain 16 60 psig 4 Twist Drain
Regulators
7 Automatic Float Drain 18 125 psig
Filter /
8 Pressure Fill
8 Sight Gauge / 21* 250 psig
Automatic Float Drain M Auto FIll
* If 250 psig spring
range is used, use
Lubricators
Metal Bowl.
Combos
CAUTION: WARNING
Accessories
!
REGULATOR PRESSURE ADJUSTMENT – The working Product rupture can cause serious injury.
range of knob adjustment is designed to permit outlet Do not connect regulator to bottled gas.
pressures within their full range. Pressure adjustment beyond Do not exceed maximum primary pressure rating.
this range is also possible because the knob is not a limiting
device. This is a common characteristic of most industrial
regulators, and limiting devices may be obtained only by
special design.
For best performance, regulated pressure should always be
set by increasing the pressure up to the desired setting. For polycarbonate bowl and sight dome, see Caution on page C2.
Kits & Accessories (See individual component sections for other kits and accessories.)
Two-Unit A1
J
Combo A
(Without Port Blocks) D F
C E
H
G
Selection
Product
B
.280 x .500
(7mm x 13mm)
Slot
A a1 b C D E
6.10 9.04 5.69 4.69 3.18 10.38
Model Model (155) (230) (145) (119) (81) (264)
Series Port Series
Numbers Numbers f G H J
Coalescers
Inches (mm)
Filter /
Three-Unit A1
A
Lubricators
C
H
G
Combos
B
.280 x .500
(7mm x 13mm)
Slot
Accessories
16B 1 2 A 13 A 2 B * —
Selection
Product
17B Standard 3-Unit 3 1/2 Inch*** 06H, 16H, A With Wall
16H Compact 2-Unit 4 3/4 Inch** 06B, 16B Mounting
17H Standard 2-Unit * Available on D Current - Bracket &
Mist 06/16 Series 07H, 17H, Port Block
06B Compact 3-Unit
only. 07B, 17B B With Mounting
Filters
** Available on
07B Standard 3-Unit Bracket,
07/17 Series
06H Compact 2-Unit only. Lubricator Body Lockout &
Options Port Block
07H Standard 2-Unit *** 06/16 available
with Port B With Fill Plug C* With Mounting
Coalescers
Blocks only. Regulator Bracket &
F With Body
Pressure Pressure Fill Lockout
Filter Bowl Options Without Gauge G With Port
Poly Bowl 11 60 psig Lubricator Bowl Options Blocks
Regulators
2 Metal Bowl Guard / Twist Drain 13 125 psig Poly Bowl J With Lockout
6 Metal Bowl Guard / 15* 250 psig 2 Metal Bowl Guard / No Drain (No Port
Automatic Float Drain 6 Metal Bowl Guard / Pressure Fill Blocks)
With Gauge
Metal Bowl K Metal Bowl Guard / Auto Fill K With Lockout
16 60 psig
3 Twist Drain
Regulators
18 125 psig N Metal Bowl Guard / Twist Drain and Port
Filter /
4 Sight Gauge / Twist Drain Blocks
21* 250 psig Metal Bowl / Sight Gauge
7 Automatic Float Drain W With Mounting
8 Sight Gauge / * If 250 psig spring 4 Twist Drain
range is used, use
Bracket
Automatic Float Drain 8 Pressure Fill
Lubricators
Metal Bowl. * 06/16 series 1/2" units
M Auto FIll
not available with option
C. Use option B.
Combos
CAUTION:
REGULATOR PRESSURE ADJUSTMENT – The working range
of knob adjustment is designed to permit outlet pressures within ! WARNING
their full range. Pressure adjustment beyond this range is also
Accessories
Product rupture can cause serious injury.
possible because the knob is not a limiting device. This is a
Do not connect regulator to bottled gas.
common characteristic of most industrial regulators, and limiting
Do not exceed maximum primary pressure rating.
devices may be obtained only by special design.
For best performance, regulated pressure should always be set
by increasing the pressure up to the desired setting. For polycarbonate bowl and sight dome, see Caution on page C2.
Kits & Accessories (See individual component sections for other kits and accessories.)
Body Connector Kit .............................................................. PS754P Port Block Kits: Size NPT BSPP BSPT
†
Lockout Valve ........................................................................ PS756P 06 Series 1/4" .......... PS750P...... PS765P ...... PS761P
†
Manifold Block ....................................................................... PS757P 3/8" .......... PS751P...... PS766P ...... PS762P
†
Wall Mounting Kit .................................................................. PS755P 1/2".......... PS752P*..... PS767P* . ... PS799P*
* Use 1/4 or 3/8 ported bodies.
†
1/4, 3/8 & 1/2 inch meet ISO 1179-1 Standard.
C
Selection
Product
Filters
Coalescers
Regulators
3/8" .......PS751P..... PS766P†....PS762P
Filter /
1/2".......PS752P*.... PS767P*†. .PS799P*
Body Connectors
* Use 1/4 or 3/8 ported bodies.
†
1/4, 3/8 & 1/2 inch meet ISO 1179-1 Standard.
06 Series..........PS754P
Lubricators
Selection
4.08 (19) 3.58
Product
Dia.
(104) (91)
1.00 2.00
.75 2.00 (25) (50)
(19) (50)
Filters
.25 (6)
.50 (13) Typ.
Typ.
Wall Mounting Kits are available for mounting your Modular 3/8" Port 1.00 1/2" Port
Coalescers
1.00 Top & Bottom (25) Top & Bottom
Assemblies and can be assembled and used with any (25)
standard body connector set.
1.50 2.00
Since Modular Combinations are always identical in size, (38) .75 (51)
1.00
(19) (25)
you can predrill for wall mounting on your equipment.
Regulators
Kit includes 1 assembly. PS757P PS857P
Regulators
Filter /
Any standard pipe plug can be used to close off unused
Lockout Valves ports.
06 Series.......... PS756P......3/8" Port NOTE: Body Connectors are not supplied with Manifold Blocks.
Lubricators
2.81
(71)
1.40
(36)
Combos
IN OUT
3.08
(78)
1.20 (31)
Slide
Accessories
Travel
1.88
(48) .31 (2.4) Dia.
1.34 Lockout
(34) Hole
2.67
(68)
Two-Unit A D F
Combo
C
C
Selection
E
Product
m s
• Relieving Regulator
Filters
t e
• 125 PSI (8.6 bar)
ut i
Coalescers
o e
7.76 9.57 6.38 3.56 15.95 1.81
d
3/4" P3N3A96SGMNNLNA
t
(197) (243) (162) (90) (405) (50)
e e
P3N3A P3N3A98SGMNNLNA
y
1"
l
Inches (mm)
a o
1-1/2"† P3N3A9PSGMNNLNA • All dimensions nominal.
Gr e obs
Regulators
ar
Regulators
Filter /
Three-Unit
Combo
Lubricators
A D F
C
Combos
E
Accessories
P3N 3 a 9 6 S G M N N L N A
Series
Type Filter
Elements
Relief Mounting
Options
C
3 Combinations w/ N Relieving
Pipe Nipples E 5 Micron M Non- A No Brackets
Selection
or Kits
Product
G 40 Micron Relieving
B Wall Bracket
s
Combination
m
Metal Bowl
Filters
e
Bowl Regulator Pressure Lubricator
t
A Hi-Flow 2-Unit
i
S Metal Bowl Range & Gauges Drain / Fill Devices
B Hi-Flow 3-Unit
t
w/ Sight Without Gauge N No Drain,
u
Gauge L 60 PSI (0 to 4 bar) Solid Bowl / Fill Plug
Coalescers
o
N 125 PSI (0 to 8 bar) M Manual Twist Drain /
d e
Fill Plug
t
Port Type Port Size H 250 PSI (0 to 17 bar)
e e
A Automatic Fill /
y
With Gauge
l
9 NPT Female 6 3/4" (w/o Port Blocks) Fill Plug
a
M 60 PSI (0 to 4 bar)
o
8 1" (w/o Port Blocks)
Gr e obs
Regulators
G 125 PSI (0 to 8 bar) S Bowl Pressure Fill /
P 1-1/2" Port Blocks Fill Plug
(w/ 1" Ported Body) J 250 PSI (0 to 17 bar)
H No Drain / Body
Pressure Fill
ar
J Manual Twist Drain /
Regulators
Body Pressure Fill
Filter /
Filter Drains Lubricator Type
M Twist Drain Oil Mist
Lubricators
A Automatic Float Drain L w/ Polycarbonate
Sight Dome
BOLD ITEMS ARE MOST POPULAR.
A w/ Nylon Sight Dome
CAUTION:
Combos
REGULATOR PRESSURE ADJUSTMENT – The working
range of knob adjustment is designed to permit outlet ! WARNING
pressures within their full range. Pressure adjustment beyond Product rupture can cause serious injury.
Accessories
this range is also possible because the knob is not a limiting Do not connect regulator to bottled gas.
device. This is a common characteristic of most industrial Do not exceed maximum primary pressure rating.
regulators, and limiting devices may be obtained only by
special design.
For best performance, regulated pressure should always be
set by increasing the pressure up to the desired setting.
Kits & Accessories (See individual component sections for other kits and accessories.)
Wall Mounting Kit* ....................................................... P3NKA00MW
C C
Selection
Product
A2
Combo (w/ Mtg Brkts,
A1 (Port Blocks)
(w/ Mtg Brkts)
B1
w/o Port Blocks)
A B
C
Combos
Standard on Filter D
• Relieving Regulator
• 125 PSI (8.6 bar)
P3N C a 9 6 S G M N N L N A
Series
Type Filter
Elements
Relief Mounting
Options
C
C Combination - N Relieving
Modular E 5 Micron M Non- A No Brackets
Selection
or Kits
Product
G 40 Micron Relieving
B Wall Bracket
s
Combination
m
Metal Bowl
Filters
e
Bowl Regulator Pressure Lubricator
t
A Hi-Flow 2-Unit
i
S Metal Bowl Range & Gauges Drain / Fill Devices
B Hi-Flow 3-Unit
t
w/ Sight Without Gauge N No Drain,
u
Gauge L 60 PSI (0 to 4 bar) Solid Bowl / Fill Plug
Coalescers
o
N 125 PSI (0 to 8 bar) M Manual Twist Drain /
d e
Fill Plug
t
Port Type Port Size H 250 PSI (0 to 17 bar)
e e
With Gauge A Automatic Fill /
y l
1 G Thread 6 3/4" (w/o Port Blocks) Fill Plug
a
M 60 PSI (0 to 4 bar)
o
(BSPP) Female 8 1" (w/o Port Blocks)
Gr e obs
Regulators
G 125 PSI (0 to 8 bar) S Bowl Pressure Fill /
2 Rc Thread H 3/4" Port Blocks Fill Plug
(BSPT) Female (w/ 3/4" Ported Body) J 250 PSI (0 to 17 bar)
H No Drain / Body
9 NPT Female M 1" Port Blocks Pressure Fill
(w/ 1" Ported Body)
ar
J Manual Twist Drain /
Regulators
P 1-1/2" Port Blocks Body Pressure Fill
Filter /
(w/ 1" Ported Body)
Filter Drains Lubricator Type
M Twist Drain Oil Mist
Lubricators
A Automatic Float Drain L w/ Polycarbonate
Sight Dome
BOLD ITEMS ARE MOST POPULAR. A w/ Nylon Sight Dome
CAUTION:
Combos
REGULATOR PRESSURE ADJUSTMENT – The working
range of knob adjustment is designed to permit outlet ! WARNING
pressures within their full range. Pressure adjustment beyond Product rupture can cause serious injury.
Accessories
this range is also possible because the knob is not a limiting Do not connect regulator to bottled gas.
device. This is a common characteristic of most industrial Do not exceed maximum primary pressure rating.
regulators, and limiting devices may be obtained only by
special design.
For best performance, regulated pressure should always be
set by increasing the pressure up to the desired setting.
Kits & Accessories (See individual component sections for other kits and accessories.)
Port Block Kits: For Modular Combinations Wall Mounting Kit*........................................................ P3NKA00MW
3/4" 1" 1-1/2"
NPT ...................P3NKB96CL........ P3NKB98CL........P3NKB9BCL
BSPP ................P3NKB16CL*...... P3NKB18CL*.......P3NKB1BCL* * If 1-1/2 BSPP E02 fittings are required, use P3NKA0BMW.
*
3/4, 1 & 1-1/2 inch meet ISO 1179-1 Standard.
C OIL
Selection
Product
Filters
Coalescers
For 1-1/2" BSPP Port Block with E02 fitting application, use
groove and square seal provided in the other.
Mounting Bracket Kit P3NKA0BMW
Regulators
Filter /
Regulator Assemblies:
NPT P3NKB96CP........P3NKB98CP.........P3NKB9BCP
Replacement Body Covers BSPP P3NKB16CP*.......P3NKB18CP*........P3NKB1BCP*
P3NKA00PM
Combos
BSPP P3NKB16CL*.......P3NKB18CL*........P3NKB1BCL*
Three-Unit Combo
A
7 6 5 4 3
D
3 2 1 0 9
F
C
C
Selection
Product
E
B
Filters
A b C D E F
Coalescers
C628-06FRL, C628-08FRL
Series Port Model Numbers 15.75 7.75 2.63 3.52 13.00 2.48
(400) (197) (67) (89) (330) (63)
3/4" C628-06FRLWJCW
C628-10FRL, C628-12FRL
Regulators
1" C628-08FRLWJCW
C628 16.50 8.13 2.84 3.86 14.13 2.64
1-1/4" C628-10FRLWJCW (419) (206) (72) (98) (359) (67)
1-1/2" C628-12FRLWJCW Inches (mm)
Regulators
For other models, refer to ordering information below. • All dimensions nominal.
Filter /
Ordering Information
Lubricators
C 628 — 06 FRL W J C W /**
Combos
Port Size Filter Bowl Options Elements Engineering
06 3/4 Inch E 32 oz. Large Capacity wo/Sight Gauge G 5 Micron Change Designator
08 1 Inch W 16 oz. Metal w/Sight Gauge J 40 Micron Will be entered at
10 1-1/4 Inch factory.
Accessories
12 1-1/2 Inch Regulator
Reduced Drains and Options
BOLD ITEMS ARE MOST POPULAR. Pressure Range
H Button Head Fill Fitting
! WARNING C 0-125 psig (Lubricator)
D 0-250 psig K Non-Relieving Regulator
Product rupture can cause serious injury.
Do not connect regulator to bottled gas. Q External Heavy Duty
Do not exceed maximum primary pressure rating. Auto Drain (Filter)
R Internal Auto Drain (Filter)
CAUTION: X9 Manual Twist Drain on
REGULATOR PRESSURE ADJUSTMENT – The working range Lubricator (Increases
of knob adjustment is designed to permit outlet pressures within Product Length by 9/16 Inch)
their full range. Pressure adjustment beyond this range is also
possible because the knob is not a limiting device. This is a common
characteristic of most industrial regulators, and limiting devices may Lubricator Bowl Options
be obtained only by special design.
E 32 oz. Large Capacity wo/Sight Gauge
For best performance, regulated pressure should always be set by W 16 oz. Metal w/Sight Gauge
increasing the pressure up to the desired setting.
B
Selection
B
Product
For Externally
Piloted Valves
1 2 1 2
3 3
F F
3
2
1 E E
Filters
A A
06S 07S
Dimensions:
Coalescers
Port
Model A B C D E F
Size
3.36 5.40 2.07 2.08 1.68 2.17
06S 3/8"
(85) (137) (53) (53) (43) (55)
Regulators
When the valve is installed into the pneumatic system and Pressure supply piping must be the same size as the inlet
pilot operator receives no signal, the air is blocked at Port 1. port or larger to insure that the pilot valve receives sufficient
When a pilot signal is received at pilot operator, the valve pressure supply during high flow conditions.
shifts closing the connection between Ports 2 and 3. At the The valves pilot signal is through a solenoid pilot mounted
Lubricators
same time air flow begins between Ports 1 and 2 at a slow on the head. The valve should be mounted downstream of
rate controlled by the needle valve located on the top of the the FRL and with the soft start adjustment needle easily
valve. When the down stream pressure reaches accessible.
approximately 60% of the supply pressure, the main valve
spool opens allowing full flow through the valve into the ! CAUTION: Do not use synthetic, reconstituted, or oils with
Combos
system. If pilot signal or system pressure is lost, the valve an alcohol content or detergent additive.
returns to it’s initial state venting the down stream pressure
through Port 3. ! CAUTION: Do not restrict the inlet of valves.
Accessories
Ordering Information
06S 2 53 B —
Performance Characteristics Table 1: Shows the relationship between the inlet pressure
Soft Start Adjustment and downstream pressure at which the main valve opens.
Flow vs. Pressure Drop
5
Downstream Pressure psig
Inlet Pressure psig
06S 07S
4
75 55 52
Pressure Drop (PSID)
3
100 67 68
06S 125 80 82
07S
2
C
Table 2: Product forward Flow Cv and Exhaust Flow Cv.
1 Series Flow Cv Exhaust Flow Cv
06S 4.1 3.4
0
07S 5.7 4.6
Selection
Product
0 20 40 60 80 100 120
Flow (SCFM)
Filters
07S Repair Kit ...............................................................PHRKSC105
30mm
22mm 06 Modular Body Connectors ............................................ PS754P
11mm
07 Modular Body Connectors ............................................ PS854P
Coalescers
40.5mm
30mm
1/2" Exhaust Silencer . ....................................................... ES50MB
3/4" Exhaust Silencer . ....................................................... ES75MB
Regulators
Connector
Specifications
Connector Description Exhaust Ports
with 6' (2m) Cord
06S ............................................................................................1/2 Inch
PS2429BP PS2429JBP Unlighted 07S . ...........................................................................................3/4 Inch
PS243079BP PS2430J79BP* Light – 24VDC
Regulators
Inlet and Outlet Ports
Filter /
PS243083BP PS2430J83BP* Light – 120V/60Hz 06S ........................................................................................... 3/8 Inch
07S . ......................................................................................... 1/2 Inch
* LED with surge suppression.
Note: Max ø6.5mm cable size required for connector w/o 6' (2m) cord. Maximum Pressure –
IP65 rated when properly installed. Standard Coil .................................................. 145 psig (10.0 bar)
Lubricators
Engineering Data: High Pressure Coil . ........................................ 200 psig (13.8 bar)
Conductors: 2 Poles Plus Ground; Cable Range (Connector Only): Minimum Operating Pressure ............................... 30 psig (2.1 bar)
6 to 8mm (0.24 to 0.31 Inch); Contact Spacing: 11mm
Temperature Ratings ........................... 40°F to 120°F (4°C to 49°C)
Combos
06S . ....................................................................2.25 lbs. (1.02 kg)
07S ...................................................................... 3.75 lbs. (1.70 kg)
27mm
Accessories
18mm
42mm Body .................................................................................... Aluminum
30mm Bottom Plug .............................................................................. Brass
Connections
Connector Central M12 Male Connector, 4 Pole
Connector Description
with 6' (2m) Cord
PS2028BP PS2028JBP Unlighted ISO 20401
PS203279BP PS2032J79BP* Light – 24VDC 4-PIN MICRO
Pin Number Function Color (TOP COVER)
PS203283BP PS2032J83BP* Light – 120V/60Hz 1 24V Supply Brown 1 4
BLK
C
G
• Solenoid operation
• Non-locking manual override
• Inline or Modular Mounting
Selection
Product
B B
1 2 1 2
3
3
D
D
F F
Filters
A A
06T 07T
Dimensions:
Coalescers
Port
Model A B C D E F G H
Size
3.36 5.40 2.08 2.17 1.04 1.68 2.07 1.90
06T 3/8"
(85) (137) (53) (26) (43) (43) (53) (48)
Regulators
Operation
The solenoid quick dump valves are high flow, normally ! CAUTION: Do not use synthetic, reconstituted, or oils with
closed, 3-Port, 2-Position directional control valves. an alcohol content or detergent additive.
Lubricators
Ordering Information
06T 2 53 A —
06T
2
1
07T
C
0
Selection
Product
0 20 40 60 80 100 120
Flow (SCFM)
Filters
07T Repair Kit . ................................................................ PHRKS105
30mm
22mm 06 Modular Body Connectors ............................................ PS754P
11mm
07 Modular Body Connectors ............................................ PS854P
Coalescers
40.5mm
30mm
1/2" Exhaust Silencer . ....................................................... ES50MB
3/4" Exhaust Silencer . ....................................................... ES75MB
Specifications
Regulators
Connector
Connector Description Exhaust Ports
with 6' (2m) Cord
06T . ...........................................................................................1/2 Inch
PS2429BP PS2429JBP Unlighted 07T . ...........................................................................................3/4 Inch
PS243079BP PS2430J79BP* Light – 24VDC Inlet and Outlet Ports
Regulators
Filter /
PS243083BP PS2430J83BP* Light – 120V/60Hz 06T . .......................................................................................... 3/8 Inch
07T . ......................................................................................... 1/2 Inch
* LED with surge suppression.
Note: Max ø6.5mm cable size required for connector w/o 6' (2m) cord. Maximum Pressure –
IP65 rated when properly installed. Standard Coil .................................................. 145 psig (10.0 bar)
Lubricators
Engineering Data: High Pressure Coil .......................................... 200 psig (13.8 bar)
Conductors: 2 Poles Plus Ground; Cable Range (Connector Only): Minimum Operating Pressure ............................... 30 psig (2.1 bar)
6 to 8mm (0.24 to 0.31 Inch); Contact Spacing: 11mm
Temperature Ratings . ............................... 40°F to 120°F (4°C to 49°C)
Weight
30mm Square 3-Pin 06T . ...........................................................................2.25 lbs. (1.02 kg)
Combos
07T . ........................................................................... 3.75 lbs. (1.70 kg)
27mm
30mm
Materials of Construction
Accessories
18mm Body .................................................................................... Aluminum
42mm
Bottom Plug .............................................................................. Brass
30mm
Connections
Central M12 Male Connector, 4 Pole
Connector
Connector Description
with 6' (2m) Cord
PS2028BP PS2028JBP Unlighted ISO 20401
4-PIN MICRO
PS203279BP PS2032J79BP* Light – 6-24VDC Pin Number Function Color (TOP COVER)
PS203283BP PS2032J83BP* Light – 120V/60Hz 1 24V Supply Brown 1 4
2
* LED with surge suppression. 0 to 10V or Control Signal 3
2 White
Note: Max ø6.5mm cable size required for connector w/o 6' (2m) cord. 4 to 20mA Ri = 100k Ω
BLUE
WHT
BRN
BLK
06P 07P
Operation
When pressure is supplied to the inlet port, gradual ! CAUTION: Do not use synthetic, reconstituted, or oils with
Regulators
Filter /
filling of the downstream system occurs through the an alcohol content or detergent additive.
adjustable needle valve. The piston opens the main valve
when the downstream side of the valve reaches ! CAUTION: Do not restrict the inlet of valves having an internal
approximately 60% of the supply pressure. The ramp up time pilot supply. Pressure supply piping must be the same size as
Lubricators
to reach the switch over pressure is adjustable via the the inlet port or larger to insure that the pilot valve receives
sufficient pressure supply during high flow conditions.
needle valve in the cover.
The Auto pilot soft start valve is not intended to be used
as a shut off valve and should always be placed after a shut
Combos
off valve.
Ordering Information
Accessories
06P 2 A —
Performance Characteristics Table 1: Shows the relationship between the inlet pressure
and downstream pressure at which the main valve opens.
Soft Start Adjustment
Flow vs. Pressure Drop Downstream Pressure psig
5
Inlet Pressure psig
06P 07P
4 75 45 25
Pressure Drop (PSID)
100 60 33
3
125 75 38
06P 150 85 45
C
2
07P
1
Table 2: Product forward Flow Cv (1 to 2).
Selection
Series Flow Cv
Product
0
0 20 40 60 80 100 120
Flow (SCFM) 06P 3.8
07P 5.5
Filters
Dimensions:
Coalescers
Port C
Model A B C D E F
Size
E
C
3.36 4.70 2.08 1.48 1.04 1.68
06P 3/8" E
(85) (119) (53) (38) (26) (43)
Regulators
3.81 5.21 2.07 1.80 1.37 1.91
07P 1/2"
(96) (132) (53) (46) (35) (48)
Inches (mm)
Regulators
Filter /
B
B
1 2 1 2
D
Lubricators
D
F F
A A
06P 07P
Combos
Accessories
Repair Kits Specifications
06P Repair Kit ..................................................................PHRKSS75 Maximum Pressure .............................................300 psig (20.7 bar)
07P Repair Kit ................................................................PHRKSS105 Minimum Operating Pressure ................................ 30 psig (2.1 bar)
06 Modular Body Connectors ............................................ PS754P Temperature Ratings ........................... 40°F to 120°F (4°C to 49°C)
07 Modular Body Connectors ............................................ PS854P Opens to Full Flow ......................................... 60% Supply Pressure
Weight –
Materials of Construction 06P.........................................................................2.75 lb. (1.25 kg)
07P........................................................................ 4.50 lb. (2.04 kg)
Body .................................................................................... Aluminum
Bottom Plug –
06P.......................................................................................... Brass
07P.............................................................................................Zinc
J K Typ. J K Typ.
H H
A G
A
F C
C C F
H
M
L M
L
C
PS417BP PS419
Selection
B
PS743P, PS843P
A F
D E
Filters
H C
G
Coalescers
PS943P G
E E
Regulators
B
F A
G
C B
A
Regulators
D
Filter /
C D
Lubricators
A B C D E F G H J K L M Kit
1.80 2.37 0.90 1.35 1.00 0.50 0.20 1.24 0.56 0.22 0.45 0.62 PS417BP
(46) (60) (23) (34) (25) (13) (5) (31) (14) (6) (11) (16) (10F, 14F, P3A, 14R, 14E)
1.80 2.17 0.90 1.35 1.00 0.50 0.20 1.24 0.56 0.22 0.45 0.62 PS419
Accessories
(46) (55) (23) (34) (25) (13) (5) (31) (14) (6) (11) (16) (04L)
0.84 3.25 1.50 0.42 2.00 0.94 0.28 1.44 PS743P
— — — —
(21) (83) (38) (11) (51) (24) (7) (37) (06F, 11F, 06L, 16L)
1.00 3.94 1.57 0.50 2.19 1.25 0.28 1.68 PS843P
— — — —
(25) (100) (40) (13) (56) (32) (7) (43) (07F, 12F, 07L, 17L)
0.28 2.12 2.00 0.14 1.85 0.63 0.28 1.41 PS943P
— — — —
(7) (54) (51) (4) (47) (16) (7) (36) (05F, 15F, 15L)
0.84 2.59 0.49 1.02 1.85 0.61 0.28 PS963P
— — — — —
(21) (66) (12) (26) (47) (15) (7) (05R, 10R, 05E, 27E)
0.84 3.26 0.77 1.46 2.00 0.94 0.28 PS707P
— — — — —
(21) (83) (20) (37) (51) (24) (7) (06R, 06E, 11R)
1.00 3.94 0.65 1.68 2.19 1.25 0.28 PS807P
— — — — —
(25) (100) (17) (43) (56) (32) (7) (07R, 07E, 12R)
6.22 8.19 2.75 1.97 2.36 1.77 1.30 P3NKA00MW
— — — — —
(158) (208) (70) (50) (60) (45) (33) (P3NF, P3NR, P3NE, P3NL)
inches (mm)
1. GENERAL INSTRUCTIONS
1.1. Scope: This safety guide is designed to cover general guidelines on the installation, use, and maintenance of Pneumatic Division
Valves, FRLs (Filters, Pressure Regulators, and Lubricators), Vacuum products and related accessory� components.
1.2. Fail-Safe: Valves, FRLs, Vacuum products and their related components can and do fail without warning for many reasons. Design all
systems and equipment in a fail-safe mode, so that failure of associated valves, FRLs or Vacuum products will not endanger persons
or property.
1.3 Relevant International Standards: For a good guide to the application of a broad spectrum of pneumatic fluid power devices see:
ISO 4414:1998, Pneumatic Fluid Power – General Rules Relating to Systems. See www.iso.org for ordering information.
1.4. Distribution: Provide a copy of this safety guide to each person that is responsible for selection, installation, or use of Valves, FRLs
or Vacuum products. Do not select, or use Parker valves, FRLs or vacuum products without thoroughly reading and understanding this
safety guide as well as the specific Parker publications for the products considered or selected.
1.5. User Responsibility: Due to the wide variety of operating conditions and applications for valves, FRLs, and vacuum products Parker
and its distributors do not represent or warrant that any particular valve, FRL or vacuum product is suitable for any specific end use
system. This safety guide does not analyze all technical parameters that must be considered in selecting a product. The user, through
its own analysis and testing, is solely responsible for:
• Making the final selection of the appropriate valve, FRL, Vacuum component, or accessory.
• Assuring that all user’s performance, endurance, maintenance, safety, and warning requirements are met and that the application
presents no health or safety hazards.
• Complying with all existing warning labels and / or providing all appropriate health and safety warnings on the equipment on which
the valves, FRLs or Vacuum products are used; and,
• Assuring compliance with all applicable government and industry standards.
1.6. Safety Devices: Safety devices should not be removed, or defeated.
1.7. Warning Labels: Warning labels should not be removed, painted over or otherwise obscured.
1.8. Additional Questions: Call the appropriate Parker technical service department if you have any questions or require any additional
information. See the Parker publication for the product being considered or used, or call 1-800-CPARKER, or go to www.parker.com,
for telephone numbers of the appropriate technical service department.
2. PRODUCT SELECTION INSTRUCTIONS
2.1. Flow Rate: The flow rate requirements of a system are frequently the primary consideration when designing any pneumatic system.
System components need to be able to provide adequate flow and pressure for the desired application.
2.2. Pressure Rating: Never exceed the rated pressure of a product. Consult product labeling, Pneumatic Division catalogs or the
instruction sheets supplied for maximum pressure ratings.
2.3. Temperature Rating: Never exceed the temperature rating of a product. Excessive heat can shorten the life expectancy of a product
and result in complete product failure.
2.4. Environment: Many environmental conditions can affect the integrity and suitability of a product for a given application. Pneumatic
Division products are designed for use in general purpose industrial applications. If these products are to be used in unusual
circumstances such as direct sunlight and/or corrosive or caustic environments, such use can shorten the useful life and lead to
premature failure of a product.
2.5. Lubrication and Compressor Carryover: Some modern synthetic oils can and will attack nitrile seals. If there is any possibility of
synthetic oils or greases migrating into the pneumatic components check for compatibility with the seal materials used. Consult the
factory or product literature for materials of construction.
2.6. Polycarbonate Bowls and Sight Glasses: To avoid potential polycarbonate bowl failures:
• Do not locate polycarbonate bowls or sight glasses in areas where they could be subject to direct sunlight, impact blow, or
temperatures outside of the rated range.
P
• Do not expose or clean polycarbonate bowls with detergents, chlorinated hydro-carbons, keytones, esters or certain alcohols.
• Do not use polycarbonate bowls or sight glasses in air systems where compressors are lubricated with fire resistant fluids such as
phosphate ester and di-ester lubricants.