Professional Documents
Culture Documents
Liebert XD Brochure
Liebert XD Brochure
yyNo need to over-chill data centers to eliminate hot spots yy Floor-mount, rack-mount, and
ceiling-mount modules, plus a
However, flexibility is also an important attribute of your cooling systems. The Liebert XD choice of cooling capacities
solution allows your facility to adapt as heat loads increase. And by adding/reconfiguring
yy Plug and play installation
solutions to react to changes in your environment, the flexible configuration of the for future growth
Liebert XD system modules also allows scalability for future growth.
yy Can cool more than
30 kW per rack
yy Complete packaged
40% systems ensure fast and
reliable installation
20% 30%
0%
Perimeter only Perimeter primary Liebert XD primary
with Liebert XD with perimeter
2
Data Center Cost (New Construction)
$20,000
Data Center Cost (New Construction)
Less Cooling
land)
Fixed Load of 4,000 kW
($000)
$30,000
$15,000
Center
Cooling System
Data (less
$25,000 Building Cost
Liebert® XD™ Solutions Cut Capital Costs $10,000 50 W/sq.ft 150 W/sq.ft 400 W/sq.ft
Less Cooling
Total Cost
2
$20,000 (500 W/m ) (1500 W/m ) (4000 W/m ) 2 2
Investing in a facility that utilizes a higher rack density design — along with a cooling
$5,000system designed especially for this type of
($000)
installation — offers a significant cost savings advantage in terms of building size and$0energy usage.
$15,000
per kW
Less Cooling Fan Load
per Capacity
$15,000
0.80 Chiller Capacity15% Lower
$10,000 1.40 Latent Load
kW
50 W/sq.ft 150 W/sq.ft 400 W/sq.ft
2
0.60 Fan Load
Load
(500 W/m2 ) (1500 W/m2 ) (4000 W/m )
$5,000 1.20 Sensible Load
$0 kW Chiller
kW Chiller Capacity 0.40
1.00
Of Sensible Heat
80,000 sq.ft. 27,000 sq.ft. 10,000 sq.ft. 0.20
8,000 m2 2,700 m2 1,000 m 2 0.80 15% Lower
0.00
Building Size 0.60 CW CRAC Liebert XD
0.40
The capital costs of a data center are significantly reduced as higher
One of the0.20
major areas of savings identified with the use of
densities of IT equipment are housed in smaller sized areas.
Liebert XD equipment is the fact that the chiller plant size can
be reduced.0.00
This is because the chiller Liebert
typicallyXDis sized for
Liebert XD - Supplemental Cooling CW CRAC
Study — Data CenterRequiresCost (New
less Construction)
Chiller Capacity 400 racks the total gross capacity of the raised-floor cooling units. The
with an average heat load Chiller
of 10 kW
Capacity Cost for building,
each. 65% lower fan load of the Liebert XD System modules and the
1.40lighting, fire protection, security,
power, cooling, etc.
Latent included.
Load Liebert
fact they are XD - Supplemental
100% sensible easily results inCooling
a capital chiller
kW Chiller Capacity per kW
Fan Load
size savings of 15% or more. Operating Costs
with Lower
of sensible heat
Sensible Load
0.60 Power Usage Fan
1.00
Building 1: 80,000 sq.ft. (8000m2), 18” (450mm) Raised Floor, Pump (XD)
Designed for0.80
50 W/sq.ft (500W/m2), Raised-floor
15% Lower Precision Air 0.50 Pump (CW)
Liebert XD - Supplemental Cooling
Chiller
Conditioning0.60
units for cooling.
0.40 with Lower Operating Costs
heat
Designed for0.20
150 W/sq.ft (1500W/m2), Raised-floor Precision Pump (XD)
Air Conditioning 0.50 32%(CW)
Pump Lower
0.00 units for cooling. 0.20
CW CRAC Liebert XD Chiller
0.40 27% Lower
Building 3: 10,000 sq.ft. (1000m2), 18” (450mm) Raised Floor. 0.10
kW power
(watts/equipment sq.m.)
capacity that once filled an entire room is
(watt/equipment sq.ft.)
y
nsit Storage Servers
1,000 e De 10,000
Ex trem
now contained in a single rack — creating 800
600 Comm
unica
tion -
Workstations (standalone) 6,000
ers
r Serv
extreme power and heat densities. 400 Com p ute
rvers
4,000
e S e
200 Storag lone) Tape Storage 2,000
tanda
Conventional Solutions Wo rksta tions (s
100
Just Can’t Keep Up 60 Tape Storag
e
800
1992 1994 1996 1998 2000 2002 2004 2006 2008 2010 2012 2014
While the cornerstone of an effective Year of Product Announcement
cooling strategy, you can’t rely solely on
conventional mission-critical cooling ASHRAE, Datacom Equipment Power Trends and Cooling Applications, 2005. © American Society of
Heating, Refrigerating and Air-Conditioning Engineers, Inc., www.ashrae.org
systems to resolve such high heat
densities. Hot spots or zones require
targeted cooling solutions. And, for
extremely high heat loads, conventional
approaches may simply take up too much And, They Attack Your Facility in Two Ways
floor space to be practical.
Hotter Facilities Hot Spots
Business continuity professionals will rely As processor capabilities increase, so Compounding the problem, this higher
on an integrated solution — one that do computer room power densities— heat load is not evenly distributed
solves both room-level and rack-level from 50 Watt per square foot (540W/ throughout the room. Sometimes,
cooling challenges. m2) to over 300 Watt per square foot power densities can grow into
(320W/m2). Your whole data center just hundreds of Watt per square foot,
Higher Watt, Higher Heat Densities keeps getting hotter. creating localized “hot spots” of
extreme heat.
This increased capacity is fueled by rapid
growth in processing capacity. But, more
compact capacity means higher heat
densities. What was a 1 kW rack now
may exceed 10 kW. This requires a shift
in focus from a room-based view of
cooling to a rack-based view. More
literally, business continuity professionals
must consider both “Watt per square
50W TO 300W 600+W
foot” and “kW per rack” when evaluating
cooling solutions.
4
The Cold Aisle Is Feeling A Bit Hot
A common way to improve performance
of existing raised floor cooling Unfortunately, even when using a hot aisle/cold aisle configuration,
applications has been the “hot aisle/cold the limits of standard underfloor cooling are soon reached as rack heat
aisle” approach. In this configuration, rows loads increase.
of equipment racks are arranged in
alternating “hot” and “cold” aisles. Only the
˚F / ˚C
cold aisles have perforated floor tiles that
100 / 38
allow cool air
90 / 32
RACK
RACK
RACK
RACK
to come up from under the raised floor.
80 / 27
70 / 21
60 / 16
Heat Load = 3 kW Per Rack With Hot Aisle /Cold Aisle Layout
˚F / ˚C
COLD AISLE
COLD AISLE
COLD AISLE
HOT AISLE
HOT AISLE
87 / 31
80 / 27
RACK
RACK
RACK
RACK
73 / 23
66 / 19
60 / 16
Heat Load = 3 kW Per Rack With Hot Aisle /Cold Aisle Layout
˚F / ˚C
COLD AISLE
COLD AISLE
COLD AISLE
98 / 37
HOT AISLE
HOT AISLE
88 / 31
RACK
RACK
RACK
RACK
79 / 26
69 / 21
60 / 16
Heat Load = 6 kW Per Rack With Hot Aisle /Cold Aisle Layout
˚F / ˚C
COLD AISLE
COLD AISLE
COLD AISLE
115 / 46
HOT AISLE
HOT AISLE
101 / 38
RACK
RACK
RACK
RACK
87 / 31
73 / 23
60 / 16
Heat Load = 10 kW Per Rack With Hot Aisle /Cold Aisle Layout
5
LIEBERT® XD™
Business continuity professionals Adding targeted cooling is more cost-efficient than trying to lower the temperature of
are demanding an integrated high
localized hot spots by increasing the overall room air conditioning capacity. Liebert
heat density cooling solution – one
that considers both room-level and
X-treme Density mission-critical cooling systems are specifically designed to address the
rack-level needs. higher heat loads generated by tightly packed electronic rack enclosures. Individual
systems can improve interior air flow, cool hot air ejected from the enclosure or cool hot
Effective Solutions Need spots near the racks.
to be Flexible
Open and Closed Architecture Systemsas defined by ASHRAE
The Liebert XD solution for high heat
density cooling applications can be The open architecture systems utilize cooling coils near the heat load either inside or
implemented as a hybrid approach outside the open server rack and utilize the room air volume as a thermal storage to ride
using a combination of floormount through short power outages.
mission-critical cooling units and
The closed architecture fully encloses the rack with the cooling coils inside. Other
cooling from the Liebert XD Series as
supplemental or primary. provisions are required for power loss ride through.
Liebert XD modules utilize micro-channel coil efficiency and low pressure drop
for lower operating costs. Use of pumped refrigerant also saves space with smaller
piping requirements and the ability to utilize more compact heat exchangers.
6
Liebert XDP Liebert XDC
Liebert XDH
The Liebert XD Piping System makes it easy to plan and expand your Liebert XD Cooling System in response to a
The Liebert XD Piping
growing System
heat load. The keymakes
is toitput
easy
thetonecessary
plan and expand your
piping in Liebert
place XD Cooling
in advance System
and then addincooling
response to achillers
units, growing orheat load.
The key is to put the necessary piping in place in advance and then add cooling units, chillers or pumping units as the need arises for
pumping units as the need arises for more cooling capability. The flexible connection piping allows the cooling modules
more cooling capability. The flexible connection piping allows the cooling modules to be added or repositioned without interruption in
to be added or repositioned without interruption in operation as needs change
operation as needs change
7
LIEBERT® XD™
8
Liebert® XD™ & Liebert iCOM™
The Liebert iCOM control system on
the Liebert XDP and the Liebert XDC
unit features:
yyMaintenance history
Liebert XDC and Liebert XDP operate with Liebert iCOM controls
to maximize the energy efficiency and precision of the system.
9
LIEBERT® XD™
yyModule Supply and Return Stay informed: Status of connected SmartModules is graphically displayed on
Air Temperatures the Liebert iCOM control of the supporting Liebert XDC or Liebert XDP.
yyModule Supply
Refrigerant Temperature
20%
25%
0%
Perimeter only Perimeter primary Liebert XD primary
with Liebert XD with perimeter
10
Liebert® XD™ Cooling Modules
The Overhead Cooling Solution Space-Saving Solution That Cools From The Top
The ceiling-mounted Liebert XDO overhead cooling module The Liebert XDV cooling module mounts vertically above
mounts directly above the cold aisle. It draws in hot air from the or on the IT rack enclosure, drawing hot air from inside
hot aisle and then discharges cool air into the cold aisle where the cabinet or from the hot aisle. It then cools the air and
the equipment air inlets are located. This energy-efficient unit discharges it down to the cold aisle. This space-saving
takes up no floor space. Available with Smart Module integrated solution requires zero floor space. Available with Smart
control board, for increased module control and monitoring. Module integrated control board, for increased module
control and monitoring.
SMART
MODULE SMART
MODULE
Row-based Cooling That’s Right In Line With Your Needs High Heat Density Cooling in a Space-Saving Design
The modular Liebert XDH horizontal row cooler is placed Liebert XDR rack door cooling module replaces the back
directly in line with rack enclosures. Air from the hot aisle is door of a server enclosure, providing cooling without increasing
drawn in through the rear of the unit, cooled, and then the rack footprint. The module uses the server fans within the
discharged through the front of the unit into the cold aisle. protected rack to provide airflow, providing an extremely
The modular and adaptive design of the Liebert XDH allows it energy efficient design.
to be easily added as the demand for cooling increases.
Available with Smart Module integrated control board, for
increased module control and monitoring.
SMART
MODULE
11
LIEBERT® XD™
Features:
yyCan cool more than 500 W/sq.ft. (5400 W/m2)
yyScalable
operates at low pressure in the system Nominal Capacity, 50 Hz1 17.1 kW / 4.9 Ton 17.7 kW / 5 Ton
and becomes a gas at room conditions, Nominal Airflow, 60Hz 2700 CFM (4590 m3/h)
making it ideal for use around electronic Nominal Airflow, 50Hz 2250 CFM (3820 m3/h)
equipment. Since the Liebert XDO always 120 V, 1 ph, 60 Hz
Input Voltage
provides 100% sensible capacity, the 220-240 V, 1 ph, 50/60 Hz
need for humidification is significantly 2.7A @ 120V, 1ph, 60 Hz
Full load amps
reduced, further reducing energy usage 1.5A @ 230V, 1ph, 50 Hz
and maintenance. Audible Noise, 60 Hz/50 Hz 85 dBa / 83 dBa Sound Power
Height, module only 22.5” (572 mm)
Width 72.0” (1829 mm)
Depth 24” (610 mm)
Weight, empty 150 lbs (68 kg)
Smart Module Control Board
(Includes Condensate Detection)
Options
Quick Connect Couplings
(for Flexible Piping)
SMART MODULE AVAILABLE 1 Nominal Capacity Rating is @ 55°F (13°C) Entering Fluid Temperature and 92°F (33°C) Entering Air Temperature.
Max capacity 60Hz: XDO16 - 17.2kW @ 90°F (32°C), XDO20 - 23kW @ 100°F (38°C)
Max capacity 50Hz: XDO16 - 17.2kW @ 93°F (34°C), XDO20 - 23kW @ 103°F (39°C)
12
Liebert® XDV Vertical Top Cooling Module
The Liebert XDV top-mounted cooling module provides sensible spot and zone cooling for high heat density equipment.
Features:
yyScalable
yyOptional pre-charged flexible piping with threaded quick connect fitting allows
adaptive and scalable expansion without interruption of cooling operations
yyFlexible installation — mounts on top of the cabinet or suspended from the ceiling
This flexible, scalable and space saving yyExcellent for spot and zone cooling
product mounts on top of the cabinet or
suspended from the ceiling, requiring zero yyCompatible with Liebert XDP, Liebert XDP with iCOM and Liebert XDC systems
floor space. The modular and adaptive
design of the Liebert XDV unit also allows yyDual (A and B) detachable power cords for increased uptime
it to be easily added as the demand for
cooling increases.
It can either draw in hot air directly from Specifications - Liebert XDV
inside the cabinet or from the hot aisle, XDV8 XDV10
and discharge cool air down into the cold Nominal Capacity, 60 Hz1 8.8 kW / 2.5 Ton 10 kW / 2.8 Ton
aisle where the electronic equipment air
Nominal Capacity, 50 Hz1 8 kW / 2.3 Ton 8 kW / 2.3 Ton
inlets are located.
Nominal Airflow, 60Hz 1000 CFM (1700 m3/h)
The Liebert XDV is a part of our high Nominal Airflow, 50Hz 830 CFM (1410 m3/h)
heat-density cooling product family that 120 V, 1 ph, 60 Hz
Input Voltage
utilizes pumped refrigerant technology. 230 V, 1 ph, 50/60 Hz
The pumped refrigerant operates at low 2A @ 120V, 1ph, 60 Hz
Full load amps
pressure in the system and becomes a 1A @ 230V, 1ph, 50 Hz
gas at room conditions, making it ideal Audible Noise, 60 Hz / 50 Hz 78 dBa / 73 dBa Sound Power
for use around electronic equipment. Height, module only 14” (355 mm)
Since the Liebert XD system always Width 23” (581 mm)
provides 100% sensible capacity, the
Depth 29.5”-39.5” (749-1003 mm)
need for humidification is significantly
Weight, empty 77 lbs (35 kg)
reduced, further reducing energy usage
and maintenance. Quick Connect Couplings
(for Flexible Piping)
Options
Smart Module Control Board
(Includes Condensate Detection)
SMART MODULE AVAILABLE
1 Nominal Capacity Rating is @ 55°F (13°C) Entering Fluid Temperature and 98°F (37°C) Entering Air Temperature.
Max capacity 60Hz: XDV8 - 8.8kW @ 95°F (35°C), XDV10 - 11.8kW @ 106°F (41°C)
Max capacity 50Hz: XDV8 - 8.8kW @ 103°F (39°C), XDV10 - 11.8kW @ 116°F (47°C)
13
LIEBERT® XD™
Features:
yyScalable
yyOptional pre-charged flexible piping with threaded quick connect fittings allows
adaptive and scalable expansion without interruption of cooling operations
yyFlexible installation
yyComplete packaged unit includes enclosure, coils, controls, fans and piping
yyCompatible with Liebert XDP, Liebert XDP with iCOM and Liebert XDC systems
gas at room conditions, making it ideal for 2500 CFM 4000 CFM
Nominal Airflow, 60 Hz
(4200 m3/h) (6800 m3/h)
use around electronic equipment.
2100 CFM 3300 CFM
Nominal Airflow, 50 Hz
Since the Liebert XD system always (3500 m3/h) (5600 m3/h)
14
Liebert® XDR Rack Door Cooling Module
The Liebert XDR is a fanless heat exchanger module that installs as the rear door of an equipment rack,
providing up to 20kW of room neutral cooling.
Features:
yyReplaces the existing back door on IT racks from Vertiv™ and
other major manufacturers
yyOperates with the Liebert XD family as a part of a high density cooling solution
yyOperates with high energy efficiency – no fans or moving parts requiring electricity
The Liebert XDR design uses the yyFanless cooling module requires no maintenance
server fans within the protected rack
to provide airflow through the unit. Ideally Suited For:
The microchannel coil heat exchanger
cools the air and returns it to room at yyRack heat loads up to 20kW
close to the same temperature as the
yyVertiv and other equipment enclosure racks
air entering the rack.
The open design of the microchannel yyExisting XD systems supported by Liebert XDP and Liebert XDC
allows the Liebert XDR to mimic the yyHot spots, regardless of space configuration
airflow of a perforated door, a feature that
literally can be seen.
Specifications - Liebert XDR
The Liebert XDR is a part of the Liebert
Nominal Capacity, 60 Hz 20.5 kW / 5.8 Ton
XD high heatdensity cooling system that
utilizes pumped refrigerant technology. Nominal Capacity, 50 Hz 20.5 kW / 5.8 Ton
The pumped refrigerant operates at low Physical *Height : 78.4 (1992 mm)
*Height without piping connections Width 23.5” (597 mm)
pressure in the system and becomes a
Depth 5.9” (150 mm)
gas at room conditions, making it ideal for
Weight, empty 130 lbs (59 kg)
use around electronic equipment. Since
Piping Hard-piping, Quick-connect couplings
the Liebert XDR always provides 100%
(Removable and “One-Shot”) for Flexible Piping
sensible capacity, the need for computer
Rack Compatibility 24” x 42U (600mm x 42U) rack enclosure
room air conditioners to provide
Maximum modules per loop 8 (eight)
humidification is significantly reduced,
resulting in lower energy usage. Nominal Capacity Rating is @ 55°F (13°C) Entering Fluid Temperature and 104°F (40°C) Entering Air Temperature, 2400 CFM (68 m3/min)
15
LIEBERT® XD™
Liebert DS
Liebert DS
This unique system allows the room
cooling capacity to increase to more than
30 kW per rack with no additional
disruptive piping installation. The flexible
connection piping also allows the cooling
modules to be re-positioned without XDV Module
XDP/XDC Above Rack
interruption in operation.
Invest Now, Save In The Future
Liebert XDV System With
Liebert XD Piping provides for future 14 kW Heat Load Per Rack
expansion and simplifies both the
installation of additional units and the
reconfiguration of components as
needs change.
Liebert DS
Liebert DS
XDV Modules
XDP/XDC Units Above Rack
Liebert DS
16
Service Solutions
Programs To Keep You Up and Running
Vertiv™ offers more ways to handle your Liebert® precision cooling maintenance and
emergency service requirements than any other source. Service and support specialists are
located everywhere you need them to be.
The Best Coverage In The Business support requirements. These offerings are Remote Monitoring
ideal for those who require the peak
Field service is provided by Vertiv Enhance your data center reliability and
operating efficiency, reliability and uptime
Services technicians augmented with The visibility with comprehensive alarm
that only a comprehensive maintenance
Service Partner Network — a nationwide management, diagnostics and response
program can deliver.
network of locally-based service partners, services that are tailored to your specific
with factory-trained technicians that We also offer a site management program needs. For both flexibility and reliability,
handle service support and maintenance that creates a customized service we can monitor via the Web or through
of Liebert precision cooling products. package for your operation by offering a dial-up. By using network interface cards,
Warranty inspection at the time of single point of contact for all your service we provide significantly more alarm types
start-up by these technicians can needs. It gives you a proactive action plan for diagnostics. And our Customer
ensure proper operation and tune the to provide operational support and Resolution Center is ready to respond as
performance of the unit to the application. guidance for your critical facility. soon as an alarm occurs.
This can be instrumental in assuring a
Additional Service Offerings That Our ability to poll your equipment’s
long unit life.
Make A Difference operational data at regular intervals
The variety of service offerings includes provides unsurpassed predictive
Liebert Services can also help to
warranty service, emergency service, maintenance capabilities. Certified
improve your data center performance
preventive maintenance and professional technicians analyze your data, identifying
and energy efficiency.
services. We offer 24 x 7 x 365 emergency issues before they become problems and
dispatch service through our Customer yyEnterprise remote monitoring maximizing availability.
Resolution Center. This facility provides
immediate access to factory-trained yyLiebert iCOM™ controls
technicians, located within your own area, networking/upgrading
who are quickly dispatched to your yyThermal assessments
location when service is required. and CFD modeling
Preventive maintenance solutions provide
you with a choice of coverage options — yyEnergy efficiency assessments
each designed to meet your specific
17
VertivCo.com | Vertiv Headquarters, 1050 Dearborn Drive, Columbus, OH, 43085, USA
© 2019 Vertiv Co. All rights reserved. Vertiv and the Vertiv logo are trademarks or registered trademarks of Vertiv Co. All other names and logos referred to are trade names, trademarks or registered trademarks of their respective owners. While every precaution has been
taken to ensure accuracy and completeness herein, Vertiv Co. assumes no responsibility, and disclaims all liability, for damages resulting from use of this information or for any errors or omissions. Specifications are subject to change without notice.
SL-11265 (R01/19)