Landmark Material Testing And Research Laboratory Pvt. Ltd.
TEST REPORT
ow No-QRS, ae Dt 01.204
Rev No.2, Ry. re 30112022
‘ULR-TC807722000000962F Issue Date: 07.01.2023
LRL2022\620
1. Name of Customer & Address PP Enterprises
C-11, UPSIDC, Baghpat, Uttar Pradesh
2. Name of Client be
3. Name of Work/ Project pe
4. Material Identification 2 EPDM Pad (Sample Quantity- I No.)
5. Source/ Location pe
6. Sample Condition when Received : OK.
7. SRF /Letter Reference 2 SRF Dated- 24.12.2022
8. Date of Sample Receipt 24.12.2022
9. Date of Sample Tested + 06.01.2023
10. Environmental Conditions 2 As per Test Method/Standard
11, Test Performed at 2 Permanent Location
1. Mechanical
1. Textile Materials
TEST RESULTS
SN. ‘Name of Test ‘Method of Test Test Results Unit
1 | Hardness (Durometer Hardness) ASTM D 2240: 15 (2021) 82 Shore A
ASTM D 792 - 2020 1460 Kgim’
Note:
ee .
(Harsh Chittoray—
Checked By
End of report
Page 1 of 1
‘This Test Report shall not be reproduced wholly or in part and can not be used as an evidence in the court of law without written approval of
(M/S Landmark Material Testing And Research Laboratory Pvt. Ltd.
‘+ The results listed reer only tothe tested sample and applicable parameters, The results apply tothe sample as received.
‘+The sample will be stored up to one month (in case of nonperishable items only) from the date of issue of test report unless otherwise specified.
‘« Total liability ofthis laboratory is limited to the invoiced amount,