Professional Documents
Culture Documents
ED
TWO YOUR WARRANTY
LIMIT All warranty claims are subject to JLab Audio
YE
AR
authorization and at our sole discretion. Retain your REGISTER TODAY
proof of purchase to ensure warranty coverage. jlabaudio.com/register
Product updates | How-to tips
BASE
.S.
CONTACT US FAQs & more
U
PO
O
ME
R SU
or visit jlabaudio.com/contact
P
EARBUDS
JBUDS AIR PLAY
A. B.
Settings
Bluetooth
IN THE BOX
EARBUDS INDICATOR LIGHTS CHARGING CASE
S M L Cloud Foam
BUTTON FUNCTIONS VOICE PROMPTS
“Hello”: Power ON
LEFT RIGHT “Earbuds joined”:
TOUCH TOUCH Earbuds paired to each other
SENSOR SENSOR “Ready to Pair”: JBuds Air Play are
ready to pair to Bluetooth device
“Bluetooth Connected”:
Earbud is connected to device
“Battery Full”: 100-75%
VOLUME DOWN: Single tap VOLUME UP: Single tap “Battery Medium”: 75-25%
SIRI (iOS) or “OK GOOGLE” PLAY / PAUSE: Double tap “Low Battery”: Less than 25%
(ANDROID): Double tap When power decreases to 10%,
TRACK FORWARD: Press & hold 1+ sec
“Low Battery” will play
SWITCH MUSIC / GAMING MODE: ANSWER: Single tap
Press & hold 1+ sec “Goodbye”: Power OFF
HANGUP: Double tap
EQ CHANGE: Triple tap
(Cycles through 3 EQ settings) REJECT INCOMING CALLS:
Press & hold 1+ sec
POWER ON: Press & hold 3+ sec
BE AWARE MODE ON / OFF: Triple tap
POWER ON: Press & hold 3+ sec
EQUALIZER MODES
Triple tap left earbud for different EQ settings. Voice prompts will indicate EQ settings (JBuds Air Play will cycle 3 EQ settings)
OR
EAR TIP
TROUBLESHOOTING
1 Enter your Bluetooth device settings and forget the JBuds Air Play. Fig A
A Settings
Open the charging case door and leave both earbuds inside. Starting with
2 ONE earbud, quickly tap the touch sensor 7x times. Light will blink blue
Bluetooth
4x times then turn solid blue. Leave the earbuds in the charging case. Fig C1
Repeat with other earbud. Quickly tap the touch sensor 7x times.
JLab JBuds Air Executive i
3 Light will blink blue 4x times then turn solid blue. Fig C2
Take both earbuds out of the charging case and keep them within 2 inches from
4 each other. Wait for one earbud to turn solid white and another to blink blue/white.
You are now ready to pair to your Bluetooth device.
B Settings
1 Enter your Bluetooth device settings and forget the JBuds Air Play. Fig A
JLABAUDIO.COM