Professional Documents
Culture Documents
1. New features
1.1 MPE support
1.2 Polyphonic aftertouch support
2. Improvements
2.1 SHIFT button behaviour changed
3. Bug fixes
3.1 VCA envelopes scratching envelopes fixed
1.3 List of polyphonic assignable targets
The following targets have a polyphonic response and can be used with MPE or aftertouch for
extensive expression:
OSCILLATOR LFO AMOUNT
OSCILLATOR EG AMOUNT
OSCILLATOR GLIDE
FILTER CUTOFF
FILTER EG AMOUNT
FILTER TRACKING
LFO1 RATE
LFO1 WAVE
LFO1 DELAY
LFO1 FADE
Nymphes synthesizer supports Import / Export for its presets in sysex format.
By default, Nymphes will send a sysex of the current preset when loading it, so that the user can
record it. In addition, there is a sysex Dump function which can be accessed through the MENU.
The user can choose to either Dump the current preset or do a full Sysex Dump of the presets
and banks (including the factory ones).
To access this: Press
MENU —> select 7 and press SHIFT + MENU. The MENU button LED will start flashing so as to
indicate that you have entered the Global MENU.
Selection 7 is the Sysex Dump.
With the Wave slider you select [Current preset 0-50% / All presets 51-100%]
The save button will remain lit if you are at the current preset and will flash if you are on All
presets.
To confirm and start the dumping process, press the SAVE button once. When the procedure is
finished, the SAVE button’s LED will turn off. Move again the slider to repeat or press MENU
button to exit.
To dump a sysex file you will need a software program that can record sysex messages. For
example, Sysex Librarian (for Mac users) or BOME send SX (for Windows).
After the sysex message is recorded , it will have the following format:
F0 00 21 35 00 06 FF AA BB PP............F7
Where:
Protobuf format. *
When selecting a full sysex Dump, Nymphes firstly will transmit all USER presets and then the
FACTORY ones. As a conclusion, all presets will be transmitted in the order of A1 to G7.
*For the full Protobuf format or further questions please contact orfeas@dreadbox-fx.com
With the above info mentioned, it is now clear that the Factory presets can be replaced through a
sysex import and can be saved to the external flash memory of the unit. Still, they cannot be
replaced by any other means and we strongly suggest that you import there your “core” presets.
Nymphes can now be set to any MIDI channel (except of 1 to 7) with the use of MIDI learn. To do
so, navigate to MIDI Channel by pressing the MENU button once and select 7 with the rotary
switch. Press MENU button once again and the MENU button LED will start flashing to indicate
that you are in the MIDI Channel MENU. While in that MENU, the unit is in a MIDI Learn and OMNI
mode. Send any MIDI message and press MENU to select the last transmitted channel or move
the rotary to select from channel 1 to 7.
For example, to select the Channel 10 from a keyboard:
Press MENU—>select 7—> MENU (now you are in an OMNI mode).
Setup on your keyboard channel 10. Then press any key.
Press MENU. Now, since the last played MIDI channel was 10, Nymphes is set to respond to that
channel.
A Scaled (Relative) Mode for the sliders is now added for easier control handling. This setting
allows changing the slider, based on the current value of the parameter, rather than jumping to the
current position of the slider. This can be selected in the already existing MENU on the global
settings, as the last choice: MENU—>7 (SHIFT+MENU)—> 3 (wave slider selects:) JUMP/CATCH/
SCALED
SHIFT button is now changed to single click SHIFT LOCK, instead of double click. Momentary
hold of SHIFT button is still supported.
Nymphes will transmit and update the new CCs values on preset LOAD if CC out is enabled. This
way the user can use or create a CC editor that can receive CCs, get informed about the exact
values of the current preset and even adjust them by sending CC back to Nymphes. The same
can be achieved through sysex, but the user will need to handle and decode the sysex messages
with the Protobuf format.
2.5 Reverb control added to Modulation matrix through CC
Reverb controls are added on all modulation targets, which can be accessed only through CCs.
Please check the updated list on the new Manual firmware v2 (paragraph 8 “CC list).
Mod Wheel can now be used for controlling the LFO amount on Pulse Width, rather than just
controlling its initial value. This was added to achieve the classic PWM sound on the Square
Wave.
In case you made a mistake in the global settings, or you are unsure of what is happening , you
may now reset everything to the default value.
A shortcut was added on power up for this. In order to access it, the user should press and hold
SHIFT + MENU on startup for 4 seconds. When enabled, MIDI channel is set to OMNI and all
settings to the below (Factory) ones:
- Pitch wheel : +/-3 semitones
- Finetune : default (A at 440hz)
- Sliders control: Jump
- Load preview: ON
- CC : In = OFF, out=OFF
- Midi channel=OMNI/Mp=OFF
There was a bug that caused hanging notes on Voice Mode change.