Professional Documents
Culture Documents
E-P
Australia wide call:
N
CAS
BRISBA
1300 CRUSHER
TLE
www.strikercrushing.com
IA
ME
BO
YS
U R N E- M A L A
L
IMPACT
PO Box 2037 Rossmoyne WA 6148 Plot 44 P.T 8286 Jalan Johan 2/4
Phone +61 (0)8 9437 3533 Estate Perindustrian Pengkalan 2 Fasa
CRUSHERS
Fax +61 (0)8 9437 3544 31550 Pusing, Ipoh, Perak Malaysia
Phone +605 366 8188
QUEENSLAND Fax +605 365 2688
26 Leonard Crescent, Brendale QLD 4500
PO Box 1232 Burpengary DC QLD 4505
Phone +61 (0)7 3881 1227
Fax +61 (0)7 3881 1996
INTERNATIONAL ENQUIRIES
Phone +61 (0)447 677 708
Email: info@strikercrushing.com
DEALERS/DISTRIBUTORS:
While Striker Crushing and Screening makes every endeavour to ensure the accuracy of the information presented in this brochure, we cannot be held liable in any way for any loss or
damage for any inaccuracies or errors you may find. Striker Crushing and Screening cannot make any warranty as to the fitness of purpose of any goods, equipment or material in this
brochure for your purposes and you must use your own endeavours and make your own enquiries in that regard.
Striker Crushing Striker Track Mounted Cone Crushers Recycling Plants
provides quality rock crushing, screening and materials handling Striker Track Mounted Jaw Crushers Rock Breakers
equipment to service and supply the quarrying and mining, Striker Track Mounted Impact Crushers Hire Equipment
civil contractors, earthmoving and materials handling industries
Striker Track Mounted Screens Striker Magnets
throughout the world.
Conveyor Systems - Fixed & Mobile Conveyor Weigh Scales
At Striker Crushing we have developed a range of equipment
and machinery that is suitable to work in the harshest of Wheel Mounted Crushing Track Mounted Conveyors
environments, including: & Screening Plants
STRIKER-1100 SERIES HDV IMPACT CRUSHER
Impact Crusher Features Large Inlet Cross-section - This allows slabby material to enter
the crusher without jamming. This is important when loading from a
The SCE - HDV series of Impactors are designed for secondary or tertiary vibrating feeder etc.
crushing of highly abrasive materials, recycling materials and medium- Fully-hydraulic Impact Arms - Impact plates are cast blocks
low silica materials. Highly abrasive materials include sandstone, gravel, identical and interchangeable, thereby permitting optimum utilization.
granite, basalt, glass, refractory rejects, cement clinker and others. Gap settings between impact arm and rotor are adjusted hydraulically to
Recycling materials include asphalt, concrete, building rubble, bricks and allow the product size to be controlled. Hydraulic pressure on the impact
others. Medium-low silica materials include limestone, dolomite, bauxite, arms is pre-set to resist the passage of uncrushed material through the
shales, gypsum, coal and others. impactor. If overloading, power failure, etc. causes material to exceed
Extra Heavy Duty Rotor - SCE - HDV Impact Crushers incorporate the pre-set pressure the impact arms retract in a controlled manner.
heavy, open disc style, two blow bar rotors as standard. Blow bar support Following completion of the retraction movement, the arm returns
beams are sized to ensure the SCE rotor has the highest moment of automatically to its pre-set gap position.
inertia available. This is important in absorbing the forces generated Wear Liners - Wear plates are generally cast from 28% chrome iron
by the Impacting process and is a key factor in our success with with a large proportion identical, thus interchangeable and turn-able.
crushing. The rotor is supported by bearings mounted in solid housings
manufactured from steel blocks with self-purging labyrinth seals. Open Discharge - Large discharge opening allows for free discharge
- no clogging - no capacity reduction.
Heavy Duty Blow Bars - The SCE - HDV Series Impactor is
equipped with 100 thick blow bars in 28% chrome iron offering the High Serviceability & Access - The housing opens up
highest wear metal utilization factor available. The blow bar thickness can hydraulically for maintenance and repair work. When the casing opens
be increased to suit the larger feed sizes vital in recycling. The service the blow bars are accessed in the vertical position. This enables the blow
life of the blow bars is extended through a design that permits the bars bars to be adjusted or replaced safer manner than in other designs.
to be lifted via the top as wear occurs. Maintenance is safer and more
expedient than in other designs.
STRIKER-1300 SERIES HD IMPACT CRUSHER
Impact Crusher Features Fully-hydraulic Impact Arms - Impact plates are cast blocks identical
and interchangeable, thereby permitting optimum utilization. Gap settings
The SCE - HD series of Impactors are designed for primary, secondary or between impact arm and rotor are adjusted hydraulically to allow the product
tertiary crushing of highly abrasive materials, recycling materials and medium- size to be controlled. Hydraulic pressure on the impact arms is pre-set to
low silica materials. Highly abrasive materials include sandstone, gravel, resist the passage of uncrushed material through the impactor. If overloading,
granite, basalt, glass, refractory rejects, cement clinker and others. Recycling power failure, etc. causes material to exceed the pre-set pressure the impact
materials include asphalt, concrete, building rubble, bricks and others. arms retract in a controlled manner. Following completion of the retraction
Medium-low silica materials include limestone, dolomite, bauxite, shales, movement, the arm returns automatically to its pre-set gap position.
gypsum, coal and others. Wear Liners - Wear plates are generally cast from 28% chrome iron with a
Extra Heavy Duty Rotor - SCE - HD Impact Crushers incorporate heavy, large proportion identical, thus interchangeable and turn-able.
open disc style, four blow bar rotors as standard. Blow bar support beams Open Discharge - Large discharge opening allows for free discharge
are sized to ensure the SCE rotor has the highest moment of inertia available. - no clogging - no capacity
This is important in absorbing the forces generated by the Impacting process reduction.
and is a key factor in our success with crushing large feed sizes.The rotor is
supported by bearings mounted in massive solid housings manufactured from High Serviceability
steel blocks with self-purging labyrinth seals. & Access - The housing
opens up hydraulically for
Heavy Duty Blow Bars - The SCE - HD Series Impactor is equipped
maintenance and repair work.
with 100 thick blow bars in 28% chrome iron offering the highest wear metal
When the casing opens the
utilization factor available. The blow bar thickness can be increased to suit the
blow bars are accessed in the
larger feed sizes vital in recycling. The service life of the blow bars is extended
vertical position. This enables
through a design that permits the bars to be lifted via the top as wear occurs.
the blow bars to be adjusted or
Maintenance is safer and more expedient than in other designs.
replaced safer manner than in
Large Inlet Cross-section - This allows slabby material to enter the other designs.
crusher without jamming. This is important when loading from a vibrating
feeder etc.
SPECIFICATION: - VARIES WITH MATERIAL & CRUSHING MODIFICATIONS
MACHINE CAPACITY TPH (*) MAX FEED ROTOR SIZE WEIGHT ELECT POWER
SIZE (mm) Ø x WIDTH Kg kW
SCE 1312 HD 150-250 800 1300 x 1210 14500 250
SCE 1315 HD 200-350 800 1300 x 1455 16500 355
(*) Capacity is dependent upon feed size, material and product required.
PRODUCT SUPPORT SERVICES
Providing a fully qualified product support/
service team to meet your requirements.
Technical support & assistance Serving Australia and Asia
Service Contracts
GENUINE STRIKER
SPARE PARTS
Don’t compromise reliability and
performance of your STRIKER Crusher.
We offer a complete range of Genuine
STRIKER wear parts & spare parts.
HYDRAULIC COMPONENTS
A comprehensive range of Sauer Danfoss hydraulic pumps,
motors, valves, etc. These are Original Equipment supply for your
STRIKER.
MISCELLANEOUS PARTS
STRIKER offer a full range of spare parts to
suit most applications including:
‘V’ BELTS CONVEYOR BELTS
BEARINGS ROSTA TENSIONERS
DRIVE COUPLINGS HYDRAULIC CYLINDERS
SKIRT RUBBER SPRINGS
KPTO/HFO TRANSFLUID TRANSMISSION
PRODUCT SUPPORT SERVICES
GREASE SYSTEMS
Complete centralized grease systems and parts. Fully automatic systems or
simple hand operated units available to suit your needs. We can design
‘after market’ lube systems if required.
DUST SUPPRESSION
Supplying a unique dust suppression system for any application. Hydraulic
driven water pump, hosing, solid spray bars and a huge range of sprinkler
nozzles are available.
MAGNETS
STRIKER offer a range of magnets for all applications. These permanent
magnets can be manufactured to suit your needs and an installation service
is available.
CONVEYOR DRIVES
Electric or hydraulic drive systems available. We can engineer the
conversion of electric systems to hydraulic or vice versa.
ROCKBOOM SYSTEMS
STRIKER offer our own range of rock boom systems to suit
all applications. All rock booms are made to order and
fitted with Atlas Copco breakers offering:
Low maintenance
Reliability
Versatility
High performance
ERTH-NEW
E-P
Australia wide call:
N
CAS
BRISBA
1300 CRUSHER
TLE
www.strikercrushing.com
IA
ME
BO
YS
U R N E- M A L A
L
IMPACT
PO Box 2037 Rossmoyne WA 6148 Plot 44 P.T 8286 Jalan Johan 2/4
Phone +61 (0)8 9437 3533 Estate Perindustrian Pengkalan 2 Fasa
CRUSHERS
Fax +61 (0)8 9437 3544 31550 Pusing, Ipoh, Perak Malaysia
Phone +605 366 8188
QUEENSLAND Fax +605 365 2688
26 Leonard Crescent, Brendale QLD 4500
PO Box 1232 Burpengary DC QLD 4505
Phone +61 (0)7 3881 1227
Fax +61 (0)7 3881 1996
INTERNATIONAL ENQUIRIES
Phone +61 (0)447 677 708
Email: info@strikercrushing.com
DEALERS/DISTRIBUTORS:
While Striker Crushing and Screening makes every endeavour to ensure the accuracy of the information presented in this brochure, we cannot be held liable in any way for any loss or
damage for any inaccuracies or errors you may find. Striker Crushing and Screening cannot make any warranty as to the fitness of purpose of any goods, equipment or material in this
brochure for your purposes and you must use your own endeavours and make your own enquiries in that regard.