Professional Documents
Culture Documents
Forouzan MCQ in Switching PDF
Forouzan MCQ in Switching PDF
pinoybix.org/2017/07/mcq-in-switching-forouzan.html
This is the MCQ in Switching from the book Data Communications and Networking 4th
Edition by Behrouz A. Forouzan. If you are looking for a reviewer in datacom, a topic in
Electronics Systems and Technologies (Communications Engineering) this will definitely help
you before taking the Board Exam.In this particular topic you have learned the three
fundamental switching methods: circuit switching, packet switching, and message switching.
If you skip the summary visit Switching which is a method in which communication devices
are connected to one another efficiently.
Watch Audio MCQ in Switching
1/12
Watch Video At: https://youtu.be/g-F_9e2ZvH4
A) five
B) three
C) two
D) four
View Answer:
Answer: Option C
Solution:
2/12
D) none of the above
View Answer:
Answer: Option B
Solution:
3. Based on the Clos criteria, if N = 200, then k must be equal to or greater than _________.
A) 19
B) 21
C) 31
D) 41
View Answer:
Answer: Option A
Solution:
View Answer:
Answer: Option B
Solution:
5. In _______ switching, the paths in the circuit are separated from one another spatially.
A) time-division
B) two-dimensional
C) space-division
D) three-dimensional
View Answer:
3/12
Answer: Option C
Solution:
6. In a ________ network, two types of addressing are involved: global and local.
A) datagram
B) virtual-circuit
C) circuit-switched
View Answer:
Answer: Option B
Solution:
A) 40,000
View Answer:
Answer: Option B
Solution:
A) circuit-switched
B) line-switched
C) frame-switched
View Answer:
Answer: Option A
4/12
Solution:
9. In a banyan switch, for 8 inputs and 8 outputs, we have _____ micro-switches at each
stage.
A) 2
B) 3
C) 4
D) 8
View Answer:
Answer: Option C
Solution:
View Answer:
Answer: Option B
Solution:
A) packet-switched
B) frame-switched
C) virtual-circuit
View Answer:
Answer: Option C
Solution:
5/12
12. The most popular technology in time-division switching is called the _________.
A) TSI
B) STI
C) ITS
View Answer:
Answer: Option A
Solution:
A) virtual-circuit
B) datagram
C) circuit-switched
View Answer:
Answer: Option A
Solution:
14. We can say that a packet switch has _______ types of components.
A) four
B) three
C) two
View Answer:
Answer: Option A
Solution:
15. In a one-stage space division switch, if N = 200, the number of crosspoints is ______.
A) 20,000
6/12
B) 40,000
C) 30,000
D) 10,000
View Answer:
Answer: Option B
Solution:
16. In a banyan switch, for 8 inputs and 8 outputs, we have _____ stages.
A) 2
B) 3
C) 4
D) 8
View Answer:
Answer: Option B
Solution:
17. A switch in a datagram network uses a routing table that is based on the ______
address.
A) destination
B) source
C) local
View Answer:
Answer: Option A
Solution:
A) six
B) five
7/12
C) four
D) three
View Answer:
Answer: Option D
Solution:
A) circuit-switched
B) datagram
C) virtual-circuit
View Answer:
Answer: Option B
Solution:
A) SSS
B) TST
C) TTT
View Answer:
Answer: Option B
Solution:
21. In _______, the resources need to be reserved during the setup phase; the resources
remain dedicated for the entire duration of data transfer phase until the teardown phase.
8/12
D) none of the above
View Answer:
Answer: Option C
Solution:
22. Based on the Clos criteria, if N = 200, then n must be equal to or greater than ____.
A) 40
B) 30
C) 20
D) 10
View Answer:
Answer: Option D
Solution:
A) physical
C) network
D) transport
View Answer:
Answer: Option A
Solution:
24. A ________ switch combines crossbar switches in several (normally three) stages.
C) multistage
View Answer:
9/12
Answer: Option C
Solution:
View Answer:
Answer: Option B
Solution:
A) five
B) four
C) three
D) two
View Answer:
Answer: Option C
Solution:
27. A ________ switch is a multistage switch with microswitches at each stage that route the
packets based on the output port represented as a binary string.
A) TSI
B) banyan
C) crossbar
View Answer:
Answer: Option B
10/12
Solution:
28. The _______ address in the header of a packet in a datagram network normally remains
the same during the entire journey of the packet.
A) destination
B) source
C) local
View Answer:
Answer: Option A
Solution:
29. Based on the Clos criteria, if N = 200, then the minimum number of crosspoints is greater
than or equal to _______.
A) 42,000
B) 20,000
C) 18,000
D) 15,200
View Answer:
Answer: Option D
Solution:
A) crossbar
B) crosspoint
C) TSI
D) STS
View Answer:
Answer: Option A
Solution:
11/12
NEXT: MCQ in Telephone and Cable Networks
Answer in Switching
Subscribe
Prev Article Next Article
12/12