Professional Documents
Culture Documents
H100 pH Specifications
Reference electrode input1) > 1 x 1010 Ohm Input current: < 1 x 10 -10 A
Measurement error 1, 2, 3) TC: 0.002 pH/K (display) mV value: < 1 mV, TC: 0.1 mV/K
pH sensor standardization*)
Pt 100/Pt 1000
NTC 30 kOhm
Measurement error 1, 2, 3) < 0.5 K (< 1K for Pt100; < 1K for NTC > 100 °C)
Overrange *)
22 mA in the case of error messages
Output filter *)
Low-pass, filter time constant: 0 … 120 s
Measurement error 1)
< 0.3% current value + 0.05 mA
Start/end of scale *)
Permitted span
Relative humidity
EMC
*) User-defined; 1) To IEC 746 Part 1, at nominal operating conditions; 2) ±1 count; 3) Plus sensor error
© 2012 Hamilton Bonaduz AG. All rights reserved.
Calimatic ® and Sensocheck® are registed trademarks by Knick Elektronische Messgeräte GmbH & Co. KG
P/N: 695137/03 — 11/2017
Hamilton Americas & Pacific Rim Hamilton Europe, Asia, & Africa
4970 Energy Way Via Crusch 8
Reno, Nevada 89502 USA CH-7402 Bonaduz, GR, Switzerland
Tel: +1-775-858-3000 Tel: +41-58-610-10-10
Fax: +1-775-856-7259 Fax: +41-58-610-00-10contact.pa.ch@
Web: www.hamiltoncompany.com hamilton.ch
sales@hamiltoncompany.com
USA: 800-648-5950
Europe: +41-58-610-10-10 To find a representative in your area, please visit hamiltoncompany.com/contacts.