Professional Documents
Culture Documents
Setup Instructions
When the application was installed it added hookup information to the supported CAD applications. All you have to
do is start your CAD application and this add-on's menu, ribbon and toolbars should appear.
If you remove and reinstall your CAD application, or if you install a new version of your CAD application, the easiest
way to restore this add-on is to double click the autohook.exe file in the applications folder. When this application is
uninstalled it will automatically remove the hooks applied during installation as well as those added with the
procedure below.
The new version of AutoCAD adds security which requires an additional procedure during manual setup.
Application Notes:
Because a single install of the application can serve both 32 and 64bit enviroments, it installs (by default) to
the Program Files (x86) folder.
The application detects the AutoCAD version running (including 32 -vs- 64bit) and loads the appropriate files
accordingly.
mk:@MSITStore:C:\Program%20Files%20(x86)\DotSoft\XL2CAD\xl2cad.chm::/@set... 2/7/2020
Page 2 of 2
The application attempts to automatically make all necessary settings. If you have problems placing spreadsheets,
click this link for details on Excel Security issues.
mk:@MSITStore:C:\Program%20Files%20(x86)\DotSoft\XL2CAD\xl2cad.chm::/@set... 2/7/2020