You are on page 1of 3



DISTRIBUTION SOLUTIONS

R-MAG® Dead tank outdoor vacuum circuit breaker

We are pleased to announce


the new optimized R-MAG
housing NEMA3R, designed
to exceed the traditional
NEMA3R rating requirements

New NEMA3R introduces


numerous improvements
focused to provide a higher
ingress protection against
water

New orders starting mid-June


2022 will be equipped with
improvements described
below*

* This change notification applies only to 15kV 1200A, 15kV 2000A,


27kV 1200A and 27kV 2000A R-MAG. All other R-MAG ratings will
continue to be manufactured with regular housing design until a
dedicated change notification comes.

Improvement

Introduction of roof overhang that


limits water exposure

Bushing brackets made of casted


aluminum and four fixing bolts to
ensure even distribution of fixing
bushing force

Galvanized steel lifting lugs to avoid


paint scratching/removal and
corrosion
DISTRIBUTION SOLUTIONS

Improvement

Introduction of expert OEM elements like


3-point door latching system, hinges,
gaskets, door stops among others

Use of self-sealing bolts in all external


bolts

No vents in HV compartment for heat


dissipation needed for any rating

Standard bolted cover for HV


compartment, optional hinged HV door

Introduction of single door in LV


compartment for all ratings
Split doors in LV compartment no longer
available for 15kV 2000A, 27kV 1200A and
27kV 2000A. Opening angle of 120°

Completely new housing gasketing


system
DISTRIBUTION SOLUTIONS

Dimensional details
The new R-MAG housing will introduce some changes in the general dimensions. Roof overhang in both
breaker sides will increase depth by 4in in all ratings. Some ratings housings will be modified according
to below table to provide a shorter footprint.

Rating New dimensions Old dimensions

15kV 1200A H: 118.1 in H: 118.1 in


Drawing: 2RNA001035A0010 D: 39.5 in D: 35.5 in
W: 47.1 in W: 47.1 in

15kV 2000A H: 123.7 in H: 123.7 in


Drawing: 2RNA001454A0010 D: 48.7 in D: 48.5 in (including vents)
W: 52.5 in W: 60.5 in

27kV 1200A H: 123.7 in H: 123.7 in


Drawing: 2RNA001333A0011 D: 48.7 in D: 44.7 in
W: 52.5 in W: 60.5 in

27kV 2000A H: 123.7 in H: 123.7 in


Drawing: 2RNA001333A0011 D: 48.7 in D: 51.7 in (including vents)
W: 52.5 in W: 60.5 in

Width measures in new dimensions include new roof dimensions


Height measured on max extended legs

For additional information, please contact your local sales representative.

1YEPCSR0022E010 – Rev5_2507202

More product information: We reserve the right to make technical changes or modify We reserve all rights in this document and in the subject matter
the contents of this document without prior notice. With and illustrations contained therein. Any reproduction, disclosure
regards to purchase orders, the agreed particulars shall to third parties or utilization of its contents – in whole or in parts
abb.com/mediumvoltage prevail. ABB does not accept any responsibility whatsoever – is forbidden without prior written consent of ABB.
for potential errors or possible lack of information in this
document. Copyright© 2022 ABB All rights reserved

You might also like