Professional Documents
Culture Documents
FOR
Lateral Load Test on retaining wall
Prepared by
Aadco testing and research lab. Pvt.
LtdF-28, Bulandshahar Road Ind.
Area.
Ghaziabad
Reference Code: IS:2911
Apparatus required:
1.Dial gauges
placed behind the wall to be tested for deflection test. Three dial gauges were placed.
Load calculation
The load calculation will be done based on the designed load as declared by the client
Procedure
i. The dial gauges are placed behind the wall at the designated place.
Make sure no vibration disturbs the reading.
iii. The load in the form of hydraulic jack is applied on the other side of wall gradually
iv. At each load increment the deflection is noted and keep the load for at least half an
v.The maximum load will be kept constant for at least 24 hours and then reduced to
vi. At zero load the dial gauges reading are noted and final recovery is calculated.
**********