Professional Documents
Culture Documents
1. Safety glasses and a welding hood with a #10 lens must be worn while operating
the mig welder.
2. Never touch the mig wire while the welder is on. It is electrically hot and can
cause serious shock.
3. Welding cap, welding gloves, a long sleeve cotton shirt, long cotton pants and
high top leather shoes must be worn while in the welding area.
4. If someone is using the mig welder, stay out of the area and wait patiently. Assist
the operator if the operator requests your help. Do not disturb the operator
otherwise.
11. If the mig welder overheats or is not working properly tell the teacher.
13. Set the flow meter at 25 CFH (cubic feet per hour).
14. We use .030 wire so that we can weld metal as thin as 22 gage.
15. Before using the mig welder, you must be able to read the setting chart in the
machine.
16. Trim the wire flush with the nozzle prior to welding.
19. Stick out is the distance between the contact tube and the weld surface and it
should be between 3/8” and 1/2".