MEASUREMENT
RECORD
Service, Vasa Engines
Engine section Engine ype Ret Date issue_—-—DocumeniNo, Page
11 Connecting rod 20 WOFLS 30.08.1996 01 portvootGs (1)
Installation (ship) Engine type: _Engine No.
Temperature ("C).___ Running hours: _
Big end bearing bore and gudgeon pin bushing
Big end bearing bore o e
Aq
‘Connecting rod screws must be tightened before measuring.
Hydraulc pressure when tightening M30 screws: 850 bar.
Norinl darter witout sets: (0) 160 ("982m
Maximum allowed diference between Ona and Dri: 0.12 mm |
Reference diameter (mm)
Drawing number or cade number:
‘Component running hours before measurement:
Temperature ("C)
Gudgeon pin bearing bush mounted
‘Wear limit B = 0 for bronze fining. Wear pattern shown in view AA
‘Component running hours before measurement:
Deviation in 400!mm
Cylinder number
1 2 3 4 5 6 z 3 @
Big end bearing bore
ot
R
oe [tL
R
os [tL
R
os ft
R
os [_t
R
ax. devation
Romarks/Manufoct. No
(stamped on conrad)
Gudgeon pin bearing bush mounted
Measurement (8) mm
Remarke/Manufect. No
Date of measur Place
asia Diesel Oy P.0. Box 252 (Terhaajentie 2) Telecop. +958 6 356 7355 Tel, +958 63270
Service, Vaasa FIN-65101 Vaasa, Finland “Tolecop. +358 6 358 7365 Telex 74251 wa af Service