Professional Documents
Culture Documents
Presys Preamp Installation Guide
Presys Preamp Installation Guide
com
Step 1: Endpin Jack Step 2: Sonicore Pickup Step 3: Preamp Location Step 4: Attach Preamp
Installation Installation
Widen the endpin hole to 15/32” Drill a 3/32” hole (2.4mm) in the Position the preamp on the flat- Attach the preamp to the guitar
(11.9mm) to accomodate the saddle slot for the pickup wire, test convenient surface on the using the supplied screws and
endpin output jack. Refer to no less than .100” (2.5mm) from side of the instrument that also mounting brackets.
Endpin Jack installation guide nearest string. Refer to Sonicore allows internal clearance. Cut out
for further details. installation guide for further cavity for preamp using supplied
details. template.
x2
x2
.093”
[2.4mm]
≥ .100”
[≥2.5mm]