Professional Documents
Culture Documents
General YTA50
Specifications Temperature Transmitter
GS 01C50C01-00EN
STANDARD SPECIFICATIONS
Accuracy Ambient Temperature Limits
See Table 1. on page 2. (Option code may affects limit)
Cold Junction Compensation Accuracy -40 to 85°C (-40 to 185°F)
(For T/C only) Ambient humidity limits
±1°C (±1.8°F) 5 to 90% RH at 40°C (104°F)
Ambient Temperature Effects Supply Voltage
See Table 1. on page 2. 7 to 35 V DC
Power Supply Effects 7 to 30 V DC for Intrinsically safe type
±0.005% of FS per Volt Load Resistance
EMC Conformity Limitation: 0 to (E-7)/0.023 [Ω]
EN61326-1 Class A, Table 2 where E is power supply voltage.
EN61326-2-3 Typical; 739Ω @ 24 V DC
EU RoHS Directive Isolation
Applicable standard: EN 50581 Input/output isolated to 1500 V AC.
Input Type, Span and Range Enclosure:
Selection from thermocouples (T/Cs), 2-, 3-, and 4- Material
wire RTDs. See Table 1 on page 2. Polycarbonate
Maximum Zero offset Color of the case
±50% of the maximum temperature Red
Input Signal Source Resistance (For T/Cs input) Mounting
10 MΩ, or 3 kΩ at power-off DIN form B head mounting
Input Lead Wire Resistance (For RTDs input) Terminals
5 Ω per wire or lower M3 screws
Sensor Burnout Weight
High or Low 50 g (0.11 lb)
Output
Two wire 4 to 20 mA DC
Response Time
1 to 60 seconds (programmable)
All Rights Reserved. Copyright © 1998, Yokogawa Electric Corporation GS 01C50C01-00EN Apr. 15, 2016-00
<<Contents>> <<Index>> 3
DIMENSIONS
Unit : mm (approx. inch) Sensor Connections
Single input (YTA50)
(+) (+)
1 1
4 5
SUPPLY SUPPLY
Ø6 2 (–)
2 (–)
)
- +
(0.24
6
3 3
3
Ø 44 (1.73)
3
(–) (B)
4 4
- + 5 (+)
5
(A)
6 6
Two-wire RTD or ohm
2 1
T/C or DC milivolts
(+) (+)
1 1
SUPPLY SUPPLY
2 (–)
2 (–)
33 (1.30) 20.2 3 3
(B) (B)
(0.80) 4 4
(B) (B)
5 5 (A)
(A)
6 6 (A)
All Rights Reserved. Copyright © 1998, Yokogawa Electric Corporation GS 01C50C01-00EN July 01, 2002-00
Subject to change without notice.