Professional Documents
Culture Documents
INVITATION TO TENDER
FOR
MECHANICAL AND E&I WORKS PROJECT (PHASE II)
SECTION 4
SCHEDULE OF COMPENSATION
The price part shall contain the Cover Letter of Bid, the Schedule of Prices and Rates
shall be prepared in strict accordance with the structure of the Quotation Forms as
enclosed hereof and sealed separately and independently.
2. BID PRICES
Tenderer shall indicate on the appropriate Bid Schedule of Prices either based on the unit
prices (where applicable) and total bid price of the ITT. The total price shall not include
any items beyond the requirement of the tendering document; otherwise, the offer on such
items will not be deducted when evaluation. Also, the price shall not omit any items
required in the tendering document; otherwise, the highest offer of the same item among
the effective bids will be added to the total bid price. It shall be noted that Company
reserves the right to disqualify any bid doesn't quote all required items. In case of
discrepancy between unit price and total, the unit price shall prevail. A bid without
itemized price required shall be considered as non-responsive.
Provided that the Bid Schedule of Prices is substantially responsive, the Company
shall correct mathematical errors on the following basis:
(a) if there is a discrepancy between the unit price and the line subtotal that
is obtained by multiplying the unit price by the quantity, the unit price shall
prevail and the line item sub-total shall be corrected,
If the Bidder that submitted the successful evaluated Bid does not accept the
correction of errors, its Bid shall be rejected.
Tenderer shall note that all bidding prices (whether of individual items or in total) shall be
considered as tax inclusive (including VAT, GST & Sales Tax) and no tax shall be
mentioned separately in the bidding price. Tenderer shall be considered disqualified if the
tax is mentioned separately in the bidding price documents.
Bidder is responsible to seek clarification through their tax advisor on the applicability of
tax laws applicable to the project prior to submitting the proposal.
Prices quoted by the Tenderer shall be fixed during the Tenderer's performance of the
contract and not subject to variation on any account. A bid submitted with an adjustable
price quotation will be treated as substantially non-responsive and will be rejected.
Tenderer’s price offer shall include, but not limit to:
♦ Price proposal for the scope of service respond to the service requirements given in
this ITT document.
♦ Promotion program, discounts scheme, and/or any other special offers applied to
Tenderer’s bid proposal.
1
CNOOC IRAQ LIMITED
3. PREAMBLE
The Unit Rates Schedule hereinafter stated shall be for all labor, construction, materials,
construction equipment and for performing all temporary and permanent work necessary
for the complete constructions specified in the Agreement. No additional charges shall be
payable except where expressly authorized in the Agreement.
3.1 The unit rates are the full payment to be made to the Contractor for completion of the
Work. For part thereof of Work completion shall be paid at pro rate of unit rate, as
specified in the Agreement and furnishing all of the contract required under the
Agreement.
3.2 These unit rates shall be fully inclusive of:
(a) Preliminaries and Close-out
The preliminaries and Close-out shall include all costs incurred towards:
1) mobilization
2) project Support
3) final Documentation including "As-built" drawings and Close-out
4) Demobilizations
(b) Project Management
The project management shall include all costs incurred towards preparation and
submission all Specifications and or any other related documents.
(c) Construction Works
The construction works will include all the mechanical, electrical and instrument,
piping, steel structure and civil works and any other services specified in the Scope of
Work. This will include the cost of handling, transportation, storage, maintaining of
materials records, taking to work site, preparation and the like all consumables,
fabrication, erection, assembly, inspection and hand over.
In addition to above, the unit rates for construction works shall also include the
following:
1) All preliminary preparation works for separators / booster pumps / transformers
relocation and installation include dismantling and removing relevant process pipe
and steel structure and transporting the separators / booster pumps / transformer to
appointed location.
2) All consumables, fabrication, erection, assembly, painting, inspection and testing
for piping work.
3) All cost of storage, protection, fabrication, installation and others as required in
the Agreement Documents.
3.3 The Contractor shall not receive remuneration for either increased personnel or those
already assigned for the Work Order if such are a result of inefficient working,
inability or failures of the Contractor, or for any reason not specifically required by
increases to the Scope of Work or acceleration instructed by the Company;
2
CNOOC IRAQ LIMITED
3.4 The Company shall not compensate the Contractor for any resource supplied but found
to be incapable of performing the normal duties or meeting the normal requirements of
their position
4. NOTES ON PRICING
4.1. The Unit Rates shall include for everything necessary to be provided and carried out
for the full and complete execution of the Work or part thereof whether or not such
work is mentioned in the Schedule of Prices, including all necessary temporary
works as required.
4.2. The Unit Rates are deemed to be the full and complete compensation for Contractor
performance of the Agreement and all of Contractor’s obligations hereunder in
accordance with the terms and conditions of the Agreement. Descriptions of work
and materials are not necessarily complete in the Schedule of Prices and therefore
reference should be made to the General Conditions of Agreement, Scope of Work
and Specifications for this information. The completed Unit Rates truly reflect the
value of the item/works required.
The Unit Rates are fully inclusive of but not limited to the following:
i) Cost towards Mobilization, demobilization, supervision and project management
services, all labor and their salaries, accommodation along with domestic water
and toilet facilities, travel, transportation, holiday, medical, messing and safety
clothing/equipment.
ii) Costs towards tools and tackles, scaffoldings, consumables, and performance
testing.
iii)Cost towards design service, construction service and installation works.
iv) All taxes, duties, insurance premium, administration expenses along with costs
towards office(s) and office equipment, safety course attendance, overheads and
profits and any other costs and charges not specifically detailed.
Notwithstanding the above, payment shall be made only for the items in Schedule of
Prices which upon award of the Agreement have been taken as the actual and correct
items of the Work under the Agreement. Company shall not entertain any adjustment
and/or claim due to lack of understanding or inaccurate estimated quantity / unit rate
by Contractor.
4.3. Contractor is deemed to have satisfied itself as to the form of accommodation
required, the nature and extent of the Work or part thereof and materials necessary
for the completion of the Work, the environment and Work Site conditions and the
means of access to the Work Site. In general, Contractor is deemed to have obtained
all necessary information as to the risks, contingencies and other circumstances,
which may influence or affect the Work Order price. Allowance is made in pricing
for any restrictions imposed by the area classification, restrictions on entry of
personnel, equipment, supplies and vehicles to Work Site, special working methods
required, and for compliance with Company Safety Rules and Regulations. Company
will not provide accommodation or other facilities to Contractor.
3
CNOOC IRAQ LIMITED
4.4. The prices include all related cost for protecting the permanent works during
construction until accepted and handover to Company under the Agreement.
4.5. The Unit Rates are deemed to include anticipated costs for all delays and/or
reinstating abortive work arising from permit to work system/or any shift work
necessitated. The Unit Rates are also deemed to include for delays or abortive work
caused by weather conditions, and for delay or disruption caused by urgent
operational requirements at the time of executing the Work. No "standby" charges are
payable to Contractor for such delays.
4.6. The Unit Rates and prices are deemed to include for all costs in respect of local
religious holidays, customs and the provision of all amenities customary in the
Republic of Iraq.
4.7. Where Contractor considers it necessary, Contractor has inserted additional
complementary items with unit rates to provide a comprehensive price synthesis.
4.8. Contractor is deemed to have inserted a Unit Rate or price as applicable against each
item included in the Schedule of Prices. The services and obligations contained in
any particular item not so separately priced are deemed to be covered in the rates or
prices for other items in that Schedule of Prices, and Contractor has referenced in
which item such work is included.
4.9. All Unit Rates, costs and charges included in the Schedule of Prices shall be quoted
in USD, and shall be fixed for the duration of the Agreement. Payment shall be made
in USD currency to the bank account of Contractor.
4
CNOOC IRAQ LIMITED
5. SCHEDULE OF PRICES
5
CNOOC IRAQ LIMITED
6
CNOOC IRAQ LIMITED
c) Civil
-
1 Excavation by manual shelter foundation and pump foundation m³ 38.00 Construction only
7
CNOOC IRAQ LIMITED
8
CNOOC IRAQ LIMITED
d) Power
-
1 11kV Switchgear 11kV,3PH,50Hz;80kA, see attached data sheet set 1.00
e) Lighting
-
Explosion-proof threading
3 ExdⅡBT4 Gb,IP65 set 10.00
boxes
9
CNOOC IRAQ LIMITED
2 Earthing bus conductor Bare Stranded Copper wire, 120 sq.mm m 100.00
7 Lightning Break Card Hot dip galvanized flat steel-50×5, pcs 10.00
10
CNOOC IRAQ LIMITED
g) Instrument
-
1)Gauge SPECIFICATION: The material of
housing:304SS; Pressure Element: Bourdon Tube,
Connection Size:1/2"NPT(M), Bottom
1 Pressure Gauge Accuracy:±1.0%;Enclosure proof:IP65; Range; Pcs 1.00
0~0.25MPa;Dial size:Φ150 Element
Material:S31803; Accessories: Sunshade Manifold
shall be provided by vendor
Gauge SPECIFICATION: The material of
housing:304SS; Pressure Element: Bourdon Tube,
Connection Size:1/2"NPT(M), Bottom
2 Pressure Gauge Accuracy:±1.0%;Enclosure proof:IP65; Range; Pcs 1.00
0~4.0MPa;Dial size : Φ150 Element
Material:S31803; Accessories: Sunshade Manifold
shall be provided by vendor
1)Gauge SPECIFICATION: The material of
housing: Aluminum Alloy; Pressure Element:
Differential Pressure Bourdon Tube, Connection Size:1/2"NPT(M),
3 Pcs 1.00
Transmitter Bottom Accuracy:±0.075%;Enclosure
proof:IP65;Explosion Proof:ExdIIBT4 Range;
0~16KPa;Dial size:Φ150 Element Type
11
CNOOC IRAQ LIMITED
12
CNOOC IRAQ LIMITED
a) Piping
-
14" THK 7mm Seamless, Steel Pipe ASTM A106
1 m 100.00
Gr.B (SSC&HIC) To ASME B36.10M
1-1/2" THK 3mm Seamless, Steel Pipe ASTM
2 m 100.00
A106 Gr.B (SSC&HIC) To ASME B36.10M
6" THK 4.6mm ASTM A106 Gr.B (SSC&HIC) To
3 Steel pipe with relevant m 100.00
ASME B36.10M
anti-corrosion and thermal
8" THK 5mm Seamless, Steel Pipe ASTM A106
4 insulation m 100.00
Gr.B To ASME B36.10M
4" THK 4.6mm Seamless, Steel Pipe ASTM A106
5 m 100.00
Gr.B (SSC&HIC) To ASME B36.10M
1/2" THK 3mm Seamless, Steel Pipe ASTM A106
6 m 100.00
Gr.B (SSC&HIC) To ASME B36.10M
13
CNOOC IRAQ LIMITED
14
CNOOC IRAQ LIMITED
15
CNOOC IRAQ LIMITED
a) Piping
-
1 GRE pipe with relevant 20"PIPE, GRE, API 15LR, TM, 20Bar m 10.00
2 anti-corrosion and thermal 10"PIPE, GRE, API 15LR, TM, 20Bar m 16.00
3 insulation 8"PIPE, GRE, API 15LR, TM, 20Bar m 30.00
4 10"ELBOW, 90-DEG, GRE, API 15LR, TF, 20Bar Pcs 3.00
5 Elbow(LR) 8"ELBOW, 90-DEG, GRE, API 15LR, TF, 20Bar Pcs 7.00
6 20"ELBOW, 90-DEG, GRE, API 15LR, TF, 20Bar Pcs 2.00
7 New Holes Trepanned 20“ see the attachment set 2.00 Construction only
16
CNOOC IRAQ LIMITED
8 Existing Holes Sealed 10“ see the attachment Set 2.00 Construction only
9 Existing Holes Sealed 8“see the attachment Set 1.00 Construction only
10 Trench Excavation DEPTH 1.6M, WIDTH 1.5M LENGTH 32M Pcs 1.00 Construction only
11 Trench Backfilling TRENCH BACKFILLING m 32.00 Construction only
b) Civil
-
17
CNOOC IRAQ LIMITED
a) Power
-
1 MCB iC65H-D20/3P+VM/0.3A Set 2.00
1000.0
2 Power cable 0.6/1kV, Cu/XLPE/SWA/PVC/FR, 3C+E, 4*6 m
0
3 Galvanized Conduit DN40 m 200.00
b) Earthing
-
Yellow/Green Earth Copper PVC Cable,
1 Earthing branch conductor m 100.00
450V/750V, 70 sq.mm
c) Instrument
-
18
CNOOC IRAQ LIMITED
19
CNOOC IRAQ LIMITED
a) Mechanical
-
1 Pump Rated cap 100m³/h, diff head 60m Pcs 4.00
b) Piping
8” PIPE ASTM A106 Gr.B(HIC&SSC) SMLS BE
1 m 15.00
ASME B36.10M SCH30
8” PIPE ASTM A790 S31803 SMLS BE ASME
2 m 20.00
B36.19M SCH10S
Steel pipe with painting, 6” PIPE ASTM A790 S31803 SMLS BE ASME
3 m 20.00
coating and thermal insulation B36.19M SCH10S
4”PIPE ASTM A790 S31803 SMLS BE ASME
4 m 20.00
B36.19M SCH10S
3/4" PIPE ASTM A790 S31803 SMLS BE ASME
5 m 10.00
B36.19M SCH80S
12” GRE, Epoxy Resins API 15 LR, Filament
6 m 23.00
Wound, UV Inhibition Safety Factor 4, 2.0Mpa
8”GRE, Epoxy Resins API 15 LR, Filament
7 m 14.00
Wound, UV Inhibition Safety Factor 4, 2.0Mpa
GRE pipe with painting,
6” GRE, Epoxy Resins API 15 LR, Filament
8 coating and thermal insulation m 40.00
Wound, UV Inhibition Safety Factor 4, 2.0Mpa
4” GRE, Epoxy Resins API 15 LR, Filament
9 m 15.00
Wound, UV Inhibition Safety Factor 4, 2.0Mpa
10 2” GRE, Epoxy Resins API 15 LR, Filament m 5.00
20
CNOOC IRAQ LIMITED
21
CNOOC IRAQ LIMITED
22
CNOOC IRAQ LIMITED
23
CNOOC IRAQ LIMITED
24
CNOOC IRAQ LIMITED
c) Power
-
0.4kV,3PH,50Hz;70kA including 4 22kw
1 0.4kV Switchgear Set 1.00
motor feeder
25
CNOOC IRAQ LIMITED
Explosion-proof threading
3 ExdⅡBT4 Gb,IP65, Set 10.00
boxes
2 Earthing bus conductor Bare Stranded Copper wire, 120 sq.mm m 100.00
26
CNOOC IRAQ LIMITED
6 Lightning Break Card Hot dip galvanized flat steel-50×5, Pcs 10.00
f) Civil
-
1 Excavation by manual (C) shelter foundation and pump foundation m³ 50.00 Construction only
27
CNOOC IRAQ LIMITED
28
CNOOC IRAQ LIMITED
1.6 New Drain Trench Construction for the WTP Water Injection Pumps
-
a) Civil
-
W X D=300X150,initial depth :150mm,slope
1 New Drain Trench m 72.00
0.05%;Steel deck-plate on the top
a) Instrument
-
Ball valve,12” 600lb,Body/Bonnet Material:
ASTM A105N The Pneumatic Actuators shall be
On-off valve with Pneumatic contained the following signal:
1 Pcs 1.00
Actuators 1) Open and close position, the signal shall be dry
contact.
2) Close control.
Double compression Cable glands, Flameproof,
EEx-d, IP65, along with locknut, IP washer, entry
2 Cable Gland Pcs 2.00
thread seal, suitable for Zone 1, Group II C and
temperature class T3;1”NPTM
Existing DCS located at FCR near METERING
Existing control system
3 STATION SKID , software configuration and Pcs 1.00
upgrading
programming, system integration, testing and
29
CNOOC IRAQ LIMITED
2. Pipeline
-
2.1 Oil and Gas Trunkline(All the facilities should be installed in the existing system which has been put into production.
Deoiling and nitrogen gas replacement, dismantling old facilities etc. (if necessary) should be contractor' scope of work.
-
)
30
CNOOC IRAQ LIMITED
31
CNOOC IRAQ LIMITED
32
CNOOC IRAQ LIMITED
33
CNOOC IRAQ LIMITED
34
CNOOC IRAQ LIMITED
35
CNOOC IRAQ LIMITED
54 Pig Indication and Transmitter Pig Indication and Transmitter Pcs 12.00
36
CNOOC IRAQ LIMITED
37
CNOOC IRAQ LIMITED
38
CNOOC IRAQ LIMITED
Insulation Flange
80 Insulation Flange,18”,Class 300\Sour Service set 1.00
(with Gasket,Bolts and Nuts)
Insulation Flange
81 Insulation Flange,16”,Class 300\Sour Service set 1.00
(with Gasket,Bolts and Nuts)
Insulation Flange
82 Insulation Flange,12”,Class 300\Sour Service set 1.00
(with Gasket,Bolts and Nuts)
Check Valve
4", Check Valve, CL150, RF, CK-3D32S, API
83 (withFlange,Gasket,Bolts and Pcs 2.00
6D/ASME B16.34/NACE MR0175/ISO 15156
Nuts)
90 Elbow (LR), 8”, SCH80, BW, SMLS, ASTM
84 Elbow A234 Gr. WPB Pcs 10.00
(HIC&SSC) To ASME B16.9, Sour Service.
90 Elbow (LR), 4”, SCH80, BW, SMLS, ASTM
85 Elbow Pcs 16.00
A234 Gr. WPB
39
CNOOC IRAQ LIMITED
40
CNOOC IRAQ LIMITED
b) HSE
-
41
CNOOC IRAQ LIMITED
c)Instrument
-
42
CNOOC IRAQ LIMITED
43
CNOOC IRAQ LIMITED
44
CNOOC IRAQ LIMITED
45
CNOOC IRAQ LIMITED
20 Instrument Junction Box IP65 Exd IIB T4, 316ss pcs 12.00
d) TELECOMMUNICATION
-
1 wireless system tower with communication devices set 2.00
46
CNOOC IRAQ LIMITED
47
CNOOC IRAQ LIMITED
e) Electrical
-
33KV/0.4KV with install accessories. (The tie-in
1 Transformer set 2.00
point is fuses on the H-pole)
30KW, 400V, 3PH, 50Hz, 0.8pf and more
informations refer to data sheet.
Itemized list of start-up, commissioning spares and
special tools and list of spares for two years of plant
2 Diesel Generator set 2.00
operations as per attached scope of work.
Vendor attacheddocumentation, scope of
work.drawings, data books, O&M instruction
manual as per attached scope of work.
Power Input: 230VAC, out putpower is more than
3 UPS system set 2.00
1.0KW,
Battery; VRLA battery ( Valve Regulated Lead
Acid), Nominal capacity 12VDC no less than
4 UPS Battery 180AH, Maintenance free, proof against deep pcs 30.00
discharge, connection cable with terminals.
Non-removable “CMIT” logo on battery
220VAC,50Hz, Exd, Variable Frequency,
5 Air Conditioner set 2.00
wall-mounted
400V, 100A, 20KA for 1 sec, 3PH+N, 50Hz and
6 Power distribution cabinet set 2.00
more information refer to single line diagram
48
CNOOC IRAQ LIMITED
2.2 Water Pipeline Upgrading in BUT and old pipeline (FQJ-BUT) renovation
-
a) Piping
-
49
CNOOC IRAQ LIMITED
50
CNOOC IRAQ LIMITED
51
CNOOC IRAQ LIMITED
a) Piping
-
16" API5LX52NS-PSL2; Seamless; FBE Internal
Coating + 3PP External Coating; Sour Service; BE;
Thickness: 8.74mm; R.O.W, Survey, leveling, pipe
transportation, stringing, assembly and welding,
100% NDT, hot bend, field joint external coating,
weldable sleeve, holiday test, hydro test;
1 Pipeline excavation, lowering and backfilling, Fiber Optical km 0.20
Cable/FOC laying & splicing (24 cores),crossings
(road,river,pipeline and cable,wall etc.),
casing pipe, cathodic protection test post(1pcs/km),
pipeline marking post(4pcs/km), fiber optical cable
marking post(4pcs/km), etc., shall be in Contractor's
work scope.
52
CNOOC IRAQ LIMITED
53
CNOOC IRAQ LIMITED
54
CNOOC IRAQ LIMITED
55
CNOOC IRAQ LIMITED
Butterfly Valve (Company 24", 300# Flanged RF A216 WCB, Valve pits shall
25 pcs 2.00 Construction only
Provided Items) be in Contractor's work scope.
56
CNOOC IRAQ LIMITED
Blind Flange
33 16" ASTM A182 F51, ASME B16.5, CL300 pcs 1.00
(with Gasket,Bolts and Nuts)
Blind Flange
34 14" ASTM A182 F51, ASME B16.5, CL300 pcs 1.00
(with Gasket,Bolts and Nuts)
Blind Flange
35 12" ASTM A182 F51, ASME B16.5, CL300 pcs 2.00
(with Gasket,Bolts and Nuts)
Insulation Flange\NPS16\CL300\WN\SCH40\Sour
Insulation Flange
36 Service\ASTM A182 F51, X52NS/S31803, set 1.00
(with Gasket,Bolts and Nuts)
8.74mm/9.53mm THK.
Insulation Flange\NPS14\CL300\WN\SCH40\Sour
Insulation Flange
37 Service\ASTM A182 F51, X52NS/S31803, set 1.00
(with Gasket,Bolts and Nuts)
8.74mm/9.53mm THK.
57
CNOOC IRAQ LIMITED
a) BUN
-
10” PIPE, ASTM A106 GR.B (SSC&HIC), ASME
1 m 10.00
B36.10M SMLS BE SCH60
6” PIPE, ASTM A106 GR.B (SSC&HIC), ASME
2 m 10.00
B36.10M SMLS BE SCH80
8” PIPE, ASTM A106 GR.B (SSC&HIC), ASME
3 m 10.00
B36.10M SMLS BE SCH30
Pipe
6” PIPE, ASTM A106 GR.B (SSC&HIC), ASME
4 m 20.00
B36.10M SMLS BE SCH40
4” PIPE, ASTM A106 GR.B (SSC&HIC), ASME
5 m 10.00
B36.10M SMLS BE SCH40
3” PIPE, ASTM A106 GR.B (SSC&HIC), ASME
6 m 5.00
B36.10M SMLS BE SCH40
6” Elbow-90°LR, ASTM A234 Gr.
7 pcs 4.00
Elbow WPB(SSC&HIC), ASME B16.9 SMLS BW SCH80
8 8” Elbow-90°LR, ASTM A234 Gr. pcs 2.00
58
CNOOC IRAQ LIMITED
59
CNOOC IRAQ LIMITED
60
CNOOC IRAQ LIMITED
b) AGS1
-
6” PIPE, ASTM A106 GR.B (SSC&HIC), ASME
1 Pipe m 10.00
B36.10M SMLS BE SCH80
6” Elbow-90°LR, ASTM A234 Gr.
2 Elbow Pcs 4.00
WPB(SSC&HIC), ASME B16.9 SMLS BW SCH80
6” Equal TEE, ASTM A234 WPB(HIC&SSC),
3 TEE Pcs 3.00
ASME B16.9 SMLS BW SCH80
61
CNOOC IRAQ LIMITED
62
CNOOC IRAQ LIMITED
c) BUS3
-
63
CNOOC IRAQ LIMITED
64
CNOOC IRAQ LIMITED
65
CNOOC IRAQ LIMITED
d) FQS
-
8” PIPE, ASTM A106 GR.B (SSC&HIC), ASME
1 Pipe m 8.00
B36.10M SMLS BE SCH60
8” Elbow-90°LR, ASTM A234 Gr.
2 Pcs 1.00
WPB(SSC&HIC), ASME B16.9 SMLS BW SCH60
Elbow
6” Elbow-90°LR, ASTM A234 Gr.
3 Pcs 4.00
WPB(SSC&HIC), ASME B16.9 SMLS BW SCH80
10”×8” Reducing TEE, ASTM A234
4 TEE Pcs 1.00
WPB(HIC&SSC), ASME B16.9 SMLS BW
66
CNOOC IRAQ LIMITED
67
CNOOC IRAQ LIMITED
68
CNOOC IRAQ LIMITED
69
CNOOC IRAQ LIMITED
70
CNOOC IRAQ LIMITED
71
CNOOC IRAQ LIMITED
72
CNOOC IRAQ LIMITED
73
CNOOC IRAQ LIMITED
Vibration Resistant Stainless Wet Material: S31803, ASME B16.5 3/4" 300lb RF,
1 Pcs 6.00
Steel Pressure Gauge range 0~4.0Mpa
74
CNOOC IRAQ LIMITED
75
CNOOC IRAQ LIMITED
76
CNOOC IRAQ LIMITED
77
CNOOC IRAQ LIMITED
Explosion-proof Lighting
12 Ex dⅡBT4 Gb,IP65 Set 1.00
distribution board
Explosion-proof power
13 Ex dⅡBT4 Gb,IP65 Set 1.00
distribution board
78
CNOOC IRAQ LIMITED
79
CNOOC IRAQ LIMITED
80
CNOOC IRAQ LIMITED
81
CNOOC IRAQ LIMITED
82
CNOOC IRAQ LIMITED
83
CNOOC IRAQ LIMITED
84
CNOOC IRAQ LIMITED
85
CNOOC IRAQ LIMITED
86
CNOOC IRAQ LIMITED
87
CNOOC IRAQ LIMITED
88
CNOOC IRAQ LIMITED
d) Electrical
-
Dismantle the existing transformer and install a new
transformer, including dismantling, transportation
1 Transformer and installation etc. Both the two transformers are Set 1.00 construction only
with Capacity of 2MVA, Please refer to attached
datasheet.
Dismantle from BUN water injection temporary
2 0.4kV Switchgear. power room,this cabinet is used for exchange the Set 1.00 construction only
existing power cabinets.
89
CNOOC IRAQ LIMITED
0.6/1kV,
7 Low Voltage Power Cable m 800.00
CU/XLPE/PVC/SWA/FR,3×240+1×120sqmm
90
CNOOC IRAQ LIMITED
Explosion-proof distribution
11 Ex dⅡBT4 Gb,IP55 set 1.00
board
4×50+1x25sqmm, 0.6/1kV,
14 Low Voltage Power Cable m 100.00
CU/XLPE/PVC/SWA/ZA
14×2.5 sqmm, 0.45/0.75kV,
15 Control Cable m 200.00
CU/XLPE/PVC/SWA/ZA
14×1.5 sqmm, 0.45/0.75kV,
16 Control Cable m 500.00
Cu/XLPE/PVC/SWA/ZA
17 Galvanized Steel Pipe DN25 m 20.00
18 Galvanized Steel Pipe DN32 m 72.00
19 Galvanized Steel Pipe DN80 m 36.00
20 Galvanized Steel Pipe DN100 m 10.00
Earthing Conductor,
21 1C,10 sqmm m 50.00
Yellow/Green Earth Copper
91
CNOOC IRAQ LIMITED
Earthing Conductor,
22 Yellow/Green Earth Copper 1C,70 sqmm m 80.00
PVC Cable
Earthing Conductor, bare
23 1C,120sqmm m 150.00
stranded copper conductor
earth electrode,Copper-Clad
24 Φ24,L=2.5m set 5.00
Steel
To be installed near the transformer,including
25 Electrical isolation box set
1250A moulded case circuit breaker(MCCB) 1.00
Dismantle and modify the cabinets from AGS1 or
26 0.4kV Switchgear set 3.00 construction only
BUN
27 SURGE ARRESTOR 51/134kV,5kA set 3.00
1000KW, 400V, 3PH, 50Hz, swop with BUN's
28 Diesel Generator set construction only
generator 1.00
29 Oil transformer Oil transformer33/0.4kV, 1000kVA, 50Hz set 1.00 construction only
92
CNOOC IRAQ LIMITED
a) Mechanical
-
Refer to CMIT-726-PIP-15.17-12001_1 DATA
SHEET FOR SURGE RELIEF VALVE SKID &
1 Surge release valve skid set 1.00
CMIT-726-PIP-15.03-12001_1_SPECIFICATION
FOR SURGE RELIEF VALVE SKID
a) Equipment
-
Dismantling (including instruments), internal
cleaning, transportation, installation and necessary
1 Set 1.00 construction only
modification of 1st stage separator (Provided by
Company) Separator, (2286mm×10668mm, 22t)
Separator
Dismantling (including instruments), internal
cleaning, transportation, installation and necessary
2 Set 1.00 construction only
modification of 1st stage separator (Provided by
Company) Separator, (2286mm×10668mm, 22t)
93
CNOOC IRAQ LIMITED
b) Piping
-
18" PIPE CS ASTM A106 Gr. B (SSC&HIC) To
1 m 20.00
ASME B36.10M SMLS BE, SCH40
12" PIPE CS ASTM A106 Gr. B (SSC&HIC) To
2 m 80.00
ASME B36.10M SMLS BE, SCH60
10" PIPE CS ASTM A106 Gr. B (SSC&HIC) To
3 m 50.00
Pipe ASME B36.10M SMLS BE, SCH60
8" PIPE CS ASTM A106 Gr. B (SSC&HIC) To
4 m 50.00
ASME B36.10M SMLS BE, SCH80
6" PIPE CS ASTM A106 Gr. B (SSC&HIC) To
5 m 100.00
ASME B36.10M SMLS BE, SCH80
6 4" PIPE CS ASTM A106 Gr. B (SSC&HIC) To m 50.00
94
CNOOC IRAQ LIMITED
95
CNOOC IRAQ LIMITED
96
CNOOC IRAQ LIMITED
97
CNOOC IRAQ LIMITED
98
CNOOC IRAQ LIMITED
99
CNOOC IRAQ LIMITED
100
CNOOC IRAQ LIMITED
c) Instrumentation
-
1 Instrument Gauge Pressure gauge ASME B16.5 300lb RF pcs 4.00
2 Transmitter Pressure Transmitter 3/4'' ASME B16.5 300lb RF pcs 6.00
3 Control Valve Control Valve CL300 6” set 3.00
4 Control Valve Control Valve CL300 3” set 2.00
101
CNOOC IRAQ LIMITED
102
CNOOC IRAQ LIMITED
d) Electrical
-
16E module for motor (132kW) and motor space
heater. Each module with circuit breaker (rated
Electrical motor control centers
1 400A) and electronic release, Contactor, MCU pcs 3.00
(MCC) module/drawer
(M102), CT, protection CT, earthing leakage CT,
PT100 temperature monitor, ect.
Explosion-proof distribution
5 Ex dⅡBT4 Gb,IP55 set 1.00
board
LED Lighting all of installation assembly for Light
6 AC LED Light Pole; with light sensation switch to switch on/off of set 1.00
light, Operation temperature : -10c°- 70c°, IP65 Ex
103
CNOOC IRAQ LIMITED
104
CNOOC IRAQ LIMITED
105
CNOOC IRAQ LIMITED
a) Piping
-
12" pipe ASTM A106 Gr.B To ASME B36.10M
1 m 350.00
SMLS BE Sch30
10" pipe ASTM A106 Gr.B To ASME B36.10M
2 Pipe m 350.00
SMLS BE Sch30
6 pipe ASTM A106 Gr.B To ASME B36.10M
3 m 200.00
SMLS BE Sch40
12” GA-1A36, gate valve, Class 150, RF, Flat Gate
4 Pcs 6.00
& /W Gear Operator
10” GA-1A36, gate valve, Class 150, RF, Flat Gate
5 Pcs 6.00
& /W Gear Operator
Valve
4” GA-1A33, gate valve, Class 150, RF, Wedge
6 Pcs 10.00
Gate
3” GA-1A33, gate valve, Class 150, RF, Wedge
7 Pcs 10.00
Gate
12” Flange, Welding Neck, RF, ASTM A105 To
8 Pcs 12.00
Flange with relevant gasket, SME B16.5, Sch30
studs & nuts 10” Flange, Welding Neck, RF, ASTM A105 To
9 Pcs 12.00
SME B16.5, Sch30
106
CNOOC IRAQ LIMITED
107
CNOOC IRAQ LIMITED
a) Electrical
-
1 UCP Siemens HMI,TP1500 comfort Pcs 1.00
2 UCP Bently Nevada rack PSU Pcs 2.00
3 UCP Bentley Nevada 3500 AC Power Supply Module Pcs 2.00
Bentley Nevada Vibration detector amplifier,3300
4 UCP Pcs 2.00
XL 5/8mm proximitor sensor
5 UCP MTL5541 safety barrier Pcs 2.00
Mocotech GmbH,Current and voltage measurement
6 Soft Starter Pcs 1.00
input card VFS-MEAS-MJ
Mocotech GmbH,Electronic voltage
7 Soft Starter transformer(receiving unit) signal converter voltage Pcs 1.00
measurement VD-MVRX
Mocotech GmbH,Current and voltage measurement
8 Soft Starter Pcs 1.00
input card VFSMEAS-MJ
108
CNOOC IRAQ LIMITED
a) Mechanical
-
Inlet: 15m3/h, Outlet: no less than 8m3/h, refer to
1 RO Water Skid set 1.00
attached data sheet
SUBMERGED WELL PUMP Q=15m3/h, H=50m,
2 Submerged Well Pump automatically start/stop according to pipe pressure, set 2.00
See attached Equipment List
3 Drainage Pump Q=15m3/h, H=30m, See attached Equipment List set 2.00
b) Piping
-
8" GRE PIPE, API 15LR, API Thread, Safety
1 m 644.00
Factor 4
6" GRE PIPE, API 15LR, API Thread, Safety 2212.0
2 m
Factor 4 0
4" GRE PIPE, API 15LR, API Thread, Safety
3 m 270.00
Factor 4
Pipe
3" GRE PIPE, API 15LR, API Thread, Safety
4 m 270.00
Factor 4
2" ASTM A312-TP316L ASME B36.19M BE
5 m 135.00
SCH40S
1" ASTM A312-TP316L ASME B36.19M BE
6 m 135.00
SCH40S
109
CNOOC IRAQ LIMITED
110
CNOOC IRAQ LIMITED
111
CNOOC IRAQ LIMITED
c) Electrical
-
BUS2
- - -
0.6/1kV,
2 Low Voltage Power Cable m 250.00
CU/XLPE/PVC/SWA/FR,4×95+1×70sqmm
112
CNOOC IRAQ LIMITED
8 DN25 m 10.00
FQN
- -
0.6/1kV,
4 Low Voltage Power Cable m 150.00
CU/XLPE/PVC/SWA/FR,4×95+1×70sqmm
5 CABLE TRENCH 800*800mm m 50.00
6 Earthing Conductor Yellow/Green Earth Copper PVC Cable 1C, m 50.00
113
CNOOC IRAQ LIMITED
10 DN25 m 10.00
d) Instrumentation
-
BUS2
- -
1 Surge Protector Pcs 9.00
2 MODBUS RS485-R COM741-S Pcs 2.00
Existing DCS software configuration and
Existing DCS software programming, system integration, testing and
3 Pcs 1.00
configuration and programming commissioning, and communication with existing
system.
Computer soft cable Cu core XLPE insulation PVC
sheathed Cu-wire braid shield flame-retardant 2500.0
4 2×2×1.5mm2 m
compound multicore steelwire wind armoring cable; 0
max ambient temperature:80℃
114
CNOOC IRAQ LIMITED
FQN
- -
1 Surge Protector Pcs 1.00
2 MODBUS RS485-R COM741-S Pcs 2.00
3 DCS Analog input module (HART) AI711-H Points 1.00
Existing DCS software configuration and
Existing DCS software programming, system integration, testing and
4 lot 1.00
configuration and programming commissioning, and communication with existing
system.
5 Stainless Steel Pressure Gauge ASME B16.5 3/4" 300lb RF,Wet Material: 316 Pcs 2.00
6 Pressure Transmitter ASME B16.5 3/4" 300lb RF,Wet Material: 316 Pcs 1.00
115
CNOOC IRAQ LIMITED
e) Civil &Structure
-
1 Civil Work C15 plain concrete m3 12.00
2 Civil Work C30 reinforced concrete m3 50.00
3 Civil Work Special grouting material m3 4.00
4 Steel structure RO Skid shed t 10.00
5 Steel structure Pipe support t 1.00
6 Civil Work Earth Work m3 200.00 construction only
7 SEWAGE WELL φ1000, concrete set 2.00
4. Total
Note:
a) P means procurement only and C means construction only. P+C means both material procurement and related construction.
b) All numbers shown in quantity column in above table (Bill of Quantities) are estimated roughly only for price evaluation reference.
During the actual execution, the quantity of some items may be 0 and some items’ quantity could be increased or decreased. Ultimate
quantity will be based on the detailed design and site works completed by the Contractor.
116
CNOOC IRAQ LIMITED
c) All work or material items mentioned herein not only include the work or material itself, but also covers its auxiliary accessories, spares,
consumables and relevant construction or installation cost etc. The final quotation filled in this table will be inclusive and integrated price
which covers all costs for complete solution.
117
CNOOC IRAQ LIMITED
5. PAYMENT SCHEDULE
The payment shall be based on the unit rate set forth in Section 5 Schedule of Prices and
the actual Bill of Quantities of works accepted by Company.
The Payment Amount for each Work Order consists of Material Procurement Part and
Construction Part. The Payment Schedule for each Work Order is as follows:
Note:
1- Company shall pay the Contractor an advance payment equivalent to 10% of total
contract price
118
CNOOC IRAQ LIMITED
2- The above Payment Schedule will be applied when the amount of Work Orders exceeds
the amount of the of US$............... (US Dollar ……..Only). All the invoices submitted
under this Agreement shall be subject to adjustment of advance payment amount of
US$ ………….. (US ……..Only) before release of any amount to Contractor as per the
above payment milestone schedule.
3- .
4- Company will make the advance payment after Contractor has provided to Company
Advance Payment Guarantee and performance security from an internationally
recognized bank.
5- Company shall issue each Work Order to Contractor before construction. Contractor
shall perform the work according to the requirements of issued Work Order. Contractor
shall get approval for the budget of Work Order from Company prior to work
performance based on the unit rate set forth in Section 5.
6- Payment shall be made by T/T within Ninety (90) days from the date of acceptance of
the relevant Invoice and Provisional Acceptance Certificate.
7- All payments under this Contract shall be subject to tax deductions as per tax laws
applicable in the Republic of Iraq.
119