Professional Documents
Culture Documents
WARNINGS
H. Printer Description
Touchscreen
USB Port
Front Door
Dual Filters Global Technical Support:
Top Lid
Sales Department:
Filament Bay
[Righ t]
Tiertime Corporation
1765 Landess Ave. #338
Power Switch
Milpitas, CA 95035, USA
Ethernet Socket
USB Port Tel: +1 888 288 6124 Full User Manual
Power Socket
www.tiertime.com
Tiertime Corporation
[Ba ck]
A. Download UP300 Touchscreen Upgrade Kit C. Printer Installation E. Start a Print
5. Open the Top Lid and remove all the tights and foams 3. Load Filament 4. Power On [Cautious] :The default nozzle height of a
inside the printer. There are six tights in the machine. Hold the filament straight Connect the printer with new printer is set to 0mm. Calibrate your
printer before the first time use.
up, feed it into the the power cord and plug
6. Open the Front Door, and take out the two foams and two
guiding tube, and make the cord into a wall
extruders beneath the build platform. As figures show
sure it sticks out from socket. F. Cautions
below:
the other end of the
1. Flex/Perf Glass Broad: Glass boards are easy to
guiding tube. break. Please handle with care.
2. Extruder Removal/ Replacment: Always withdraw
D. Install Software filament first, turn off the machine, unplug the
extruder cable before removing or replacing the
1. Download the latest software from the offical Tiertime
nozzle.
website.
3. Cable Removal: Always turn off the machine
* For Windows: https://www.tiertime.com/download before removing any internal cables.
a. Take out the extruder. b. Turn the foam 90 Operating System requirement: Windows 7 SP1 or
4. HOT: Never touch the extruder and the build
degrees and then take it above.
board while the printer is operating.
out of the machine.
* For Mac OS: Go to Apple APP Store and search for
5. Safety First: Always wear safety gloves when
UP Studio. using the scraper.
7. Take out the roll of filament, the accessory box and the
Operation System requirement: macOS X 10.10 or
power cord at the bottom of the cardboard box. 6. Adult Supervision: Adult supervision is required in
above.
the presence of children. Small printed parts are
8. Put all the foams back to the box, and keep the box for
2. Install the software on your computer. a choking hazard, and always keep sharp tools
the future use. away from children.