You are on page 1of 48

IMPORTANT NOTE: When installing Rationel windows and

optional ARBOSIL 1090 silicone to seal cill fixing accessories, please ensure compliance with national
building regulations and British/European standards where
Tremco-Illbruck TP600 compressible seal (20/8-15mm necessary. This drawing is for guidance only and the
nominal or sized to suit finished joint) by installer customer must be satisfied that the principles outlined in
this drawing are effectively transposed to suit specific
40.0 115.0 (115mm mainframe) project requirements and site conditions.
Tremco Illbruck FM230 PU expanding foam by installer
m
die
A
w
lre
m
sn
otln
sa
h
ie
sre
ih
row
D
nsn
o
e
.ca
o
.lt
175mm x 3mm galvanised mild steel restraint bracket NOTES:
with 2 x No.10x40mm w/screws into frame and plugged
and screwed into structure with shimming as required - 1. Exetn rw aleahte so eb
rtha ete lTirem bu lrco
lkI-
all by installer so
nejita
gtp
ln
se
zh iefze
o
sd
n
e
tio
d
u
jtri
refer to drg. no. R.BES.RBG.001 for restraint bracket ARBOSL1 I0 co 9
in 0
lse iseanldpo ye
lhtelne
design guidance bacn kigo rd.
2. F nxigsandba rcnko
eyib
stn
eclitsa
ldrtl
frame extension by others fitted by installer accod rancew hR tion aigsa
lteu
dliance.
3. F nxigo rundsmubse tao b
e
wthlto
saitla
nda lsl
a
rtnsm eotrdtfm ianh dtorughteRoainste yse
ltm.
structural opening

internal finish, air seal and vapour control layer by


overall frame

others

optional Tremco-Illbruck ME500 internal flexible


membrane by installer where/if required for air sealing primary weather line
primary air barrier line

Rev Date By Description


31.0 nominal
(tolerance:-2/+3)

Title:

Rationel AURA
TYPICAL CILL DETAIL
brick/block masonry
cavity closer leg must not impede
sealing grounds Scale: 1:2 approx @ A4 Drawing no:

local 50 x 3mm GMS bearing plate Date: January 2017


AURA.W1.01.A.C.001
by installer bedded on silicone Drawn: Studio62
75mm aluminium cill by others screwed Status: approved Revision:
and sealed on silicone at interface with R

frame extension by installer


refer to drg. no. AURA.W1.M.CPG.001
brickwork blockwork
for cill pressing design guidance
Rationel Windows (UK) Ltd.
7 Avonbury Business Park, Howes Lane,
Bicester, Oxfordshire. OX26 2UA
25.0 102.5 100.0 100.0
tel: 01869 248181
fax: 01869 249693
web: www.rationel.co.uk
NOTE: cavity wall insulation omitted for clarity
© Rationel Windows (UK) Ltd. This drawing must not be copied,
reproduced or published in whole or in part for commercial gain
without prior written permission of Rationel Windows (UK) Ltd.
IMPORTANT NOTE: When installing Rationel windows and
accessories, please ensure compliance with national
building regulations and British/European standards where
necessary. This drawing is for guidance only and the
customer must be satisfied that the principles outlined in
this drawing are effectively transposed to suit specific
project requirements and site conditions.
102.5 100.0 100.0
m
die
A
w
lre
m
sn
otln
sa
h
ie
sre
ih
row
D
nsn
o
e
.ca
o
.lt
NOTES:
1. Exetn rw aleahte so eb
rtha ete lTirem bu lrco
lkI-
brickwork blockwork so
nejita
gtp
ln
se
zh iefze
o
sd
n
e
tio
d
u
jtri
ARBOSL1 I0 co 9
in 0
lse iseanldpo ye
lhtelne
bacn kigo rd.
2. F nxigsandba rcnko
eyib
stn
eclitsa
ldrtl
accod rancew hR tion aigsa
lteu
dliance.
3. F nxigo rundsmubse tao b
e
wthlto
saitla
nda lsl
a
rtnsm eotrdtfm ianh dtorughteRoainste yse
ltm.

primary weather line


11.0 nominal
(tolerance:-2/+3)

primary air barrier line

Rev Date By Description

Title:
optional Tremco-Illbruck ME500 internal flexible
structural opening

membrane by installer where/if required for air sealing Rationel AURA


overall frame

internal finish, air seal and vapour control layer by


TYPICAL HEAD DETAIL
others brick/block masonry

175mm x 3mm galvanised mild steel restraint bracket Scale: 1:2 approx @ A4 Drawing no:

with 2 x No.10x30mm w/screws into frame and fixed Date: January 2017
into lintel with shimming as required - all by installer AURA.W1.01.A.H.001
refer to drg. no. R.BES.RBG.001 for restraint bracket Drawn: Studio62
design guidance Status: approved Revision:

R
Tremco Illbruck FM230 PU expanding foam by installer

Tremco-Illbruck TP600 compressible seal (25/10-18mm


115.0 (115mm mainframe) nominal or sized to suit finished joint) by installer Rationel Windows (UK) Ltd.
40.0 7 Avonbury Business Park, Howes Lane,
Bicester, Oxfordshire. OX26 2UA
tel: 01869 248181
fax: 01869 249693
web: www.rationel.co.uk
© Rationel Windows (UK) Ltd. This drawing must not be copied,
reproduced or published in whole or in part for commercial gain
without prior written permission of Rationel Windows (UK) Ltd.
IMPORTANT NOTE: When installing Rationel windows and
accessories, please ensure compliance with national
building regulations and British/European standards where
optional Tremco-Illbruck ME500 internal flexible necessary. This drawing is for guidance only and the
membrane by installer where/if required for air sealing customer must be satisfied that the principles outlined in
this drawing are effectively transposed to suit specific
internal finish, air seal and vapour control layer by project requirements and site conditions.
others m
die
A
w
lre
m
sn
otln
sa
h
ie
sre
ih
row
D
nsn
o
e
.ca
o
.lt

175mm x 3mm galvanised mild steel restraint bracket NOTES:


with 2 x No.10x30mm w/screws into frame and plugged 1. Exetn rw aleahte so eb
rtha ete lTirem bu lrco
lkI-
100.0

and screwed into structure with shimming as required - so


nejita
gtp
ln
se
zh iefze
o
sd
n
e
tio
d
u
jtri
blockwork
all by installer ARBOSL1 I0 co 9
in 0
lse iseanldpo ye
lhtelne
refer to drg. no. R.BES.RBG.001 for restraint bracket bacn kigo rd.
design guidance 2. F nxigsandba rcnko
eyib
stn
eclitsa
ldrtl
accod rancew hR tion aigsa
lteu
dliance.
cavity closer by others - leg must not impede sealing grounds 3. F nxigo rundsmubse tao b
e
wthlto
saitla
nda lsl
a
rtnsm eotrdtfm ianh dtorughteRoainste yse
ltm.
Tremco Illbruck FM230 PU expanding foam by installer

Tremco-Illbruck TP600 compressible seal (25/10-18mm


nominal or sized to suit finished joint) by installer primary weather line
primary air barrier line
100.0

115.0 (115mm mainframe)


Rev Date By Description

Title:

Rationel AURA
TYPICAL JAMB DETAIL
brick/block masonry

Scale: 1:2 approx @ A4 Drawing no:


102.5

brickwork Date: January 2017


AURA.W1.01.A.J.001
Drawn: Studio62
Status: approved Revision:

40.0
R
structural opening

Rationel Windows (UK) Ltd.


7 Avonbury Business Park, Howes Lane,
ARBOSIL 1090 silicone to seal between
25.0
Bicester, Oxfordshire. OX26 2UA
each end of cill and structure by installer
aluminium cill tel: 01869 248181
fax: 01869 249693
11.0 nominal web: www.rationel.co.uk
(tolerance:-2/+3) overall frame
© Rationel Windows (UK) Ltd. This drawing must not be copied,
reproduced or published in whole or in part for commercial gain
without prior written permission of Rationel Windows (UK) Ltd.
optional ARBOSIL 1090 silicone to seal cill fixing
IMPORTANT NOTE: When installing Rationel windows and
*40.0 115.0 (115mm mainframe) accessories, please ensure compliance with national
Tremco-Illbruck TimberMax compressible seal sized to building regulations and British/European standards where
suit finished joint by installer - size to be adjusted to necessary. This drawing is for guidance only and the
suit projected settlement and installed strictly in customer must be satisfied that the principles outlined in
accordance with manufacturers instructions this drawing are effectively transposed to suit specific
project requirements and site conditions.
31mm + settlement 'X' (refer to table below)

Tremco Illbruck FM230 PU expanding foam by installer m


die
A
w
lre
m
sn
otln
sa
h
ie
sre
ih
row
D
nsn
o
e
.ca
o
.lt
NOTES:
150mm x 3mm galvanised mild steel restraint bracket with
2 x No.10x40mm w/screws into frame and fixed into timber 1. Exetn rw aleahte so eb
rtha ete lTirem bu lrco
lkI-
frame structure with shimming as required - all by installer so
nejita
gtp
ln
se
zh iefze
o
sd
n
e
tio
d
u
jtri
structural opening

refer to drg. no. R.BES.RBG.001 for restraint bracket ARBOSL1 I0 co 9


in 0
lse iseanldpo ye
lhtelne
overall frame

design guidance bacn kigo rd.


settlement 2. F nxigsandba rcnko
eyib
stn
eclitsa
ldrtl
frame extension by others fitted by installer accod rancew hR tion aigsa
lteu
dliance.
3. F nxigo rundsmubse tao b
e
wthlto
saitla
nda lsl
internal finish and air seal by others a
rtnsm eotrdtfm ianh dtorughteRoainste yse
ltm.

Tremco-Illbruck ME500 internal flexible membrane by


installer where/if required for air sealing
primary weather line
primary air barrier line

vapour control
initial tape dim = 11mm + settlement 'X'

Timber Frame layer by others


Rev Date By Description
static
settlement
Title:
start
Rationel AURA
finish TYPICAL CILL DETAIL
loadbearing cavity batten to suit timber frame brick/timber frame
requirements by others
Scale: 1:2 approx @ A4 Drawing no:
75mm aluminium cill by others screwed and sealed on
silicone at interface with frame extension by installer Date: January 2017
brickwork refer to drg. no. AURA.W1.M.CPG.001for cill pressing AURA.W1.01.B.C.001
Drawn: Studio62
design guidance
25.0 102.5 50.0 12.0 140.0 Status: approved Revision:

settlement 'X' per storey (up to 5 stories) NOTES:


- *window setback dimension to be adjusted to ensure that required Tremco
location
using solid timber using engineered
Illbruck tape width does not encroach over timber frame structure - refer to Rationel Windows (UK) Ltd.
joist floors (mm) i-joist floors (mm) 7 Avonbury Business Park, Howes Lane,
manufacturers literature for tape size in relation to storey settlement Bicester, Oxfordshire. OX26 2UA
ground storey 3 3
- timber frame insulation omitted for clarity
first storey 12 9 tel: 01869 248181
- window fixings must be to timber frame only, NOT to external structure/finish
second storey 21 15 fax: 01869 249693
which remains static during settlement web: www.rationel.co.uk
third storey 30 21 - data in adjacent table is to be used in absence of project specific calculations
fourth storey 39 27 © Rationel Windows (UK) Ltd. This drawing must not be copied,
and assumes use of timber with moisture content of less than 20% bearing on reproduced or published in whole or in part for commercial gain
fifth storey 48 33 concrete ground floor without prior written permission of Rationel Windows (UK) Ltd.
Source: LABC warranty technical manual v.7
102.5 50.0 12.0 140.0 IMPORTANT NOTE: When installing Rationel windows and
accessories, please ensure compliance with national
building regulations and British/European standards where
necessary. This drawing is for guidance only and the
customer must be satisfied that the principles outlined in
this drawing are effectively transposed to suit specific
final tape dim = 11mm + settlement 'X' brickwork project requirements and site conditions.

m
die
A
w
lre
m
sn
otln
sa
h
ie
sre
ih
row
D
nsn
o
e
.ca
o
.lt
NOTES:
1. Exetn rw aleahte so eb
rtha ete lTirem bu lrco
lkI-
so
nejita
gtp
ln
se
zh iefze
o
sd
n
e
tio
d
u
jtri
cavity batten to suit timber frame
static ARBOSL1 I0 co 9
in 0
lse iseanldpo ye
lhtelne
requirements by others
bacn kigo rd.
start 2. F nxigsandba rcnko
eyib
stn
eclitsa
ldrtl
accod rancew hR tion aigsa
lteu
dliance.
finish 3. F nxigo rundsmubse tao b
e
wthlto
saitla
nda lsl
settlement
a
rtnsm eotrdtfm ianh dtorughteRoainste yse
ltm.
Timber Frame

primary weather line


primary air barrier line

vapour control layer by others


structural opening

Tremco-Illbruck ME500 internal flexible membrane by


installer where/if required for air sealing
Rev Date By Description
settlement internal finish and air seal by others
overall frame

Title:
Tremco Illbruck FM230 PU expanding foam by installer
Rationel AURA
150mm x 3mm galvanised mild steel restraint bracket with TYPICAL HEAD DETAIL
2 x No.10x30mm w/screws into frame and fixed into timber
brick/timber frame
frame structure with shimming as required - all by installer
refer to drg. no. R.BES.RBG.001 for restraint bracket
Scale: 1:2 approx @ A4 Drawing no:
design guidance
Date: January 2017
Tremco-Illbruck TimberMax compressible seal sized to AURA.W1.01.B.H.001
suit finished joint by installer - size to be adjusted to Drawn: Studio62
*40.0 115.0 (115mm mainframe) suit projected settlement and installed strictly in Status: approved Revision:
accordance with manufacturers instructions R

settlement 'X' per storey (up to 5 stories) NOTES:


- *window setback dimension to be adjusted to ensure that required Tremco
location
using solid timber using engineered
Illbruck tape width does not encroach over timber frame structure - refer to Rationel Windows (UK) Ltd.
joist floors (mm) i-joist floors (mm) 7 Avonbury Business Park, Howes Lane,
manufacturers literature for tape size in relation to storey settlement Bicester, Oxfordshire. OX26 2UA
ground storey 3 3
- timber frame insulation omitted for clarity
first storey 12 9 tel: 01869 248181
- window fixings must be to timber frame only, NOT to external structure/finish
second storey 21 15 fax: 01869 249693
which remains static during settlement web: www.rationel.co.uk
third storey 30 21 - data in adjacent table is to be used in absence of project specific calculations
fourth storey 39 27 © Rationel Windows (UK) Ltd. This drawing must not be copied,
and assumes use of timber with moisture content of less than 20% bearing on reproduced or published in whole or in part for commercial gain
fifth storey 48 33 concrete ground floor without prior written permission of Rationel Windows (UK) Ltd.
Source: LABC warranty technical manual v.7
IMPORTANT NOTE: When installing Rationel windows and
accessories, please ensure compliance with national
building regulations and British/European standards where
necessary. This drawing is for guidance only and the
vapour control layer by others customer must be satisfied that the principles outlined in
this drawing are effectively transposed to suit specific
project requirements and site conditions.
Tremco-Illbruck ME500 internal flexible membrane by
Timber Frame
installer for air sealing m
die
A
w
lre
m
sn
otln
sa
h
ie
sre
ih
row
D
nsn
o
e
.ca
o
.lt
NOTES:
internal finish and air seal by others
1. Exetn rw aleahte so eb
rtha ete lTirem bu lrco
lkI-
150mm x 3mm galvanised mild steel restraint bracket with so
nejita
gtp
ln
se
zh iefze
o
sd
n
e
tio
d
u
jtri
2 x No.10x30mm w/screws into frame and fixed into timber ARBOSL1 I0 co 9
in 0
lse iseanldpo ye
lhtelne
frame structure with shimming as required - all by installer bacn kigo rd.
refer to drg. no. R.BES.RBG.001 for restraint bracket 2. F nxigsandba rcnko
eyib
stn
eclitsa
ldrtl
140.0

design guidance accod rancew hR tion aigsa


lteu
dliance.
3. F nxigo rundsmubse tao b
e
wthlto
saitla
nda lsl
cavity batten to suit timber frame requirements by others a
rtnsm eotrdtfm ianh dtorughteRoainste yse
ltm.

Tremco Illbruck FM230 PU expanding foam by installer

Tremco-Illbruck TP600 compressible seal (20/8-15mm primary weather line


nominal or sized to suit finished joint) by installer
primary air barrier line
NOTE - window fixings must be to timber frame only, NOT to external
structure/finish which remains static during timber frame settlement
12.0
50.0

115.0 (115mm mainframe)


Rev Date By Description

Title:

Rationel AURA
TYPICAL JAMB DETAIL
brick/timber frame

Scale: 1:2 approx @ A4 Drawing no:

Date: January 2017


102.5

brickwork AURA.W1.01.B.J.001
Drawn: Studio62
Status: approved Revision:
*window setback dimension to be adjusted
R
to ensure that required Tremco Illbruck tape
*40.0

width does not encroach over timber frame


structure - refer to manufacturers literature
for tape size in relation to storey settlement Rationel Windows (UK) Ltd.
7 Avonbury Business Park, Howes Lane,
Bicester, Oxfordshire. OX26 2UA
25.0

tel: 01869 248181


fax: 01869 249693
aluminium cill web: www.rationel.co.uk
11.0 nominal
(tolerance:-2/+3) overall frame © Rationel Windows (UK) Ltd. This drawing must not be copied,
reproduced or published in whole or in part for commercial gain
structural opening without prior written permission of Rationel Windows (UK) Ltd.
IMPORTANT NOTE: When installing Rationel windows and
optional ARBOSIL 1090 silicone to seal cill fixing accessories, please ensure compliance with national
building regulations and British/European standards where
Tremco-Illbruck TP600 compressible seal (20/8-15mm necessary. This drawing is for guidance only and the
nominal or sized to suit finished joint) by installer customer must be satisfied that the principles outlined in
this drawing are effectively transposed to suit specific
40.0 115.0 (115mm mainframe) project requirements and site conditions.
Tremco Illbruck FM230 PU expanding foam by installer
m
die
A
w
lre
m
sn
otln
sa
h
ie
sre
ih
row
D
nsn
o
e
.ca
o
.lt
175mm x 3mm galvanised mild steel restraint bracket NOTES:
with 2 x No.10x40mm w/screws into frame and fixed
into steel frame structure with shimming as required - 1. Exetn rw aleahte so eb
rtha ete lTirem bu lrco
lkI-
all by installer so
nejita
gtp
ln
se
zh iefze
o
sd
n
e
tio
d
u
jtri
refer to drg. no. R.BES.RBG.001 for restraint bracket ARBOSL1 I0 co 9
in 0
lse iseanldpo ye
lhtelne
design guidance bacn kigo rd.
2. F nxigsandba rcnko
eyib
stn
eclitsa
ldrtl
frame extension by others fitted by installer accod rancew hR tion aigsa
lteu
dliance.
3. F nxigo rundsmubse tao b
e
wthlto
saitla
nda lsl
a
rtnsm eotrdtfm ianh dtorughteRoainste yse
ltm.
structural opening

internal finish, air seal and vapour control layer by


overall frame

others

optional Tremco-Illbruck ME500 internal flexible


membrane by installer where/if required for air sealing primary weather line
primary air barrier line

Rev Date By Description


31.0 nominal
(tolerance:-2/+3)

Title:

Rationel AURA
TYPICAL CILL DETAIL
brick/steel frame system
cavity closer leg must not impede
sealing grounds Scale: 1:2 approx @ A4 Drawing no:

local 50 x 3mm GMS bearing plate Date: January 2017


by installer bedded on silicone AURA.W1.01.C.C.001
Drawn: Studio62
75mm aluminium cill by others screwed Status: approved Revision:
and sealed on silicone at interface with
R
frame extension by installer
refer to drg. no. AURA.W1.M.CPG.001
brickwork for cill pressing design guidance steel frame system
Rationel Windows (UK) Ltd.
7 Avonbury Business Park, Howes Lane,
Bicester, Oxfordshire. OX26 2UA
25.0 102.5 100.0 12.0 104.0 including track
tel: 01869 248181
fax: 01869 249693
web: www.rationel.co.uk
NOTE: cavity wall insulation omitted for clarity
© Rationel Windows (UK) Ltd. This drawing must not be copied,
reproduced or published in whole or in part for commercial gain
without prior written permission of Rationel Windows (UK) Ltd.
IMPORTANT NOTE: When installing Rationel windows and
accessories, please ensure compliance with national
building regulations and British/European standards where
necessary. This drawing is for guidance only and the
customer must be satisfied that the principles outlined in
NOTE: cavity wall insulation omitted for clarity this drawing are effectively transposed to suit specific
project requirements and site conditions.
102.5 100.0 12.0 104.0 including track
m
die
A
w
lre
m
sn
otln
sa
h
ie
sre
ih
row
D
nsn
o
e
.ca
o
.lt
NOTES:
1. Exetn rw aleahte so eb
rtha ete lTirem bu lrco
lkI-
brickwork steel frame system so
nejita
gtp
ln
se
zh iefze
o
sd
n
e
tio
d
u
jtri
ARBOSL1 I0 co 9
in 0
lse iseanldpo ye
lhtelne
bacn kigo rd.
2. F nxigsandba rcnko
eyib
stn
eclitsa
ldrtl
cavity closer leg must not accod rancew hR tion aigsa
lteu
dliance.
impede sealing grounds 3. F nxigo rundsmubse tao b
e
wthlto
saitla
nda lsl
a
rtnsm eotrdtfm ianh dtorughteRoainste yse
ltm.

primary weather line


11.0 nominal
(tolerance:-2/+3)

primary air barrier line

Rev Date By Description

Title:
optional Tremco-Illbruck ME500 internal flexible
structural opening

membrane by installer where/if required for air sealing Rationel AURA


overall frame

internal finish, air seal and vapour control layer by


TYPICAL HEAD DETAIL
brick/steel frame system
others

175mm x 3mm galvanised mild steel restraint bracket Scale: 1:2 approx @ A4 Drawing no:

with 2 x No.10x30mm w/screws into frame and fixed Date: January 2017
into steel frame structure with shimming as required - AURA.W1.01.C.H.001
all by installer Drawn: Studio62
refer to drg. no. R.BES.RBG.001 for restraint bracket Status: approved Revision:
design guidance R

Tremco Illbruck FM230 PU expanding foam by installer

Tremco-Illbruck TP600 compressible seal (25/10-18mm Rationel Windows (UK) Ltd.


40.0 115.0 (115mm mainframe) 7 Avonbury Business Park, Howes Lane,
nominal or sized to suit finished joint) by installer Bicester, Oxfordshire. OX26 2UA
tel: 01869 248181
fax: 01869 249693
web: www.rationel.co.uk
© Rationel Windows (UK) Ltd. This drawing must not be copied,
reproduced or published in whole or in part for commercial gain
without prior written permission of Rationel Windows (UK) Ltd.
IMPORTANT NOTE: When installing Rationel windows and
accessories, please ensure compliance with national
building regulations and British/European standards where
necessary. This drawing is for guidance only and the
customer must be satisfied that the principles outlined in
this drawing are effectively transposed to suit specific
project requirements and site conditions.
104.0 including track optional Tremco-Illbruck ME500 internal flexible m
die
A
w
lre
m
sn
otln
sa
h
ie
sre
ih
row
D
nsn
o
e
.ca
o
.lt
membrane by installer where/if required for air sealing
NOTES:
internal finish, air seal and vapour control layer by 1. Exetn rw aleahte so eb
rtha ete lTirem bu lrco
lkI-
steel frame system
others so
nejita
gtp
ln
se
zh iefze
o
sd
n
e
tio
d
u
jtri
ARBOSL1 I0 co 9
in 0
lse iseanldpo ye
lhtelne
175mm x 3mm galvanised mild steel restraint bracket bacn kigo rd.
with 2 x No.10x30mm w/screws into frame and fixed 2. F nxigsandba rcnko
eyib
stn
eclitsa
ldrtl
into steel frame structure with shimming as required - accod rancew hR tion aigsa
lteu
dliance.
all by installer 3. F nxigo rundsmubse tao b
e
wthlto
saitla
nda lsl
refer to drg. no. R.BES.RBG.001 for restraint bracket a
rtnsm eotrdtfm ianh dtorughteRoainste yse
ltm.
design guidance
12.0

cavity closer by others - leg must not impede sealing grounds

Tremco Illbruck FM230 PU expanding foam by installer primary weather line


primary air barrier line
Tremco-Illbruck TP600 compressible seal (25/10-18mm
nominal or sized to suit finished joint) by installer
100.0

115.0 (115mm mainframe)


Rev Date By Description

Title:

Rationel AURA
TYPICAL JAMB DETAIL
brick/steel frame system

Scale: 1:2 approx @ A4 Drawing no:


102.5

Date: January 2017


brickwork AURA.W1.01.C.J.001
Drawn: Studio62
Status: approved Revision:

40.0
structural opening
Rationel Windows (UK) Ltd.
7 Avonbury Business Park, Howes Lane,
Bicester, Oxfordshire. OX26 2UA
ARBOSIL 1090 silicone to seal between
25.0

each end of cill and structure by installer tel: 01869 248181


aluminium cill fax: 01869 249693
11.0 nominal web: www.rationel.co.uk
(tolerance:-2/+3) overall frame © Rationel Windows (UK) Ltd. This drawing must not be copied,
reproduced or published in whole or in part for commercial gain
without prior written permission of Rationel Windows (UK) Ltd.
IMPORTANT NOTE: When installing Rationel windows and
optional ARBOSIL 1090 silicone to seal cill fixing accessories, please ensure compliance with national
building regulations and British/European standards where
Tremco-Illbruck TP600 compressible seal (20/8-15mm necessary. This drawing is for guidance only and the
customer must be satisfied that the principles outlined in
nominal or sized to suit finished joint) by installer this drawing are effectively transposed to suit specific
project requirements and site conditions.
40.0 115.0 (115mm mainframe) Tremco Illbruck FM230 PU expanding foam by installer
m
die
A
w
lre
m
sn
otln
sa
h
ie
sre
ih
row
D
nsn
o
e
.ca
o
.lt
150mm x 3mm galvanised mild steel restraint bracket NOTES:
with 2 x No.10x40mm w/screws into frame and fixed 1. Exetn rw aleahte so eb
rtha ete lTirem bu lrco
lkI-
into structural insulated panel with shimming as required so
nejita
gtp
ln
se
zh iefze
o
sd
n
e
tio
d
u
jtri
- all by installer ARBOSL1 I0 co 9
in 0
lse iseanldpo ye
lhtelne
refer to drg. no. R.BES.RBG.001 for restraint bracket bacn kigo rd.
design guidance 2. F nxigsandba rcnko
eyib
stn
eclitsa
ldrtl
accod rancew hR tion aigsa
lteu
dliance.
frame extension by others fitted by installer 3. F nxigo rundsmubse tao b
e
wthlto
saitla
nda lsl
a
rtnsm eotrdtfm ianh dtorughteRoainste yse
ltm.
internal finish and air seal by others
structural opening

overall frame

Tremco-Illbruck ME500 internal flexible membrane by


installer for air sealing
primary weather line
vapour control layer by others primary air barrier line

Rev Date By Description


31.0 nominal
(tolerance:-2/+3)

Title:

Rationel AURA
SIP system TYPICAL CILL DETAIL
brick/structural insulated panel

Scale: 1:2 approx @ A4 Drawing no:

loadbearing cavity batten to suit SIP system Date: January 2017


requirements by others AURA.W1.01.D.C.001
Drawn: Studio62

75mm aluminium cill by others screwed and Status: approved Revision:

sealed on silicone at interface with frame R

extension by installer
refer to drg. no. AURA.W1.M.CPG.001 for cill
brickwork pressing design guidance Rationel Windows (UK) Ltd.
7 Avonbury Business Park, Howes Lane,
Bicester, Oxfordshire. OX26 2UA
tel: 01869 248181
25.0 102.5 50.0 150.0
fax: 01869 249693
web: www.rationel.co.uk
© Rationel Windows (UK) Ltd. This drawing must not be copied,
reproduced or published in whole or in part for commercial gain
without prior written permission of Rationel Windows (UK) Ltd.
IMPORTANT NOTE: When installing Rationel windows and
accessories, please ensure compliance with national
building regulations and British/European standards where
necessary. This drawing is for guidance only and the
customer must be satisfied that the principles outlined in
this drawing are effectively transposed to suit specific
project requirements and site conditions.
102.5 50.0 150.0
m
die
A
w
lre
m
sn
otln
sa
h
ie
sre
ih
row
D
nsn
o
e
.ca
o
.lt
NOTES:
1. Exetn rw aleahte so eb
rtha ete lTirem bu lrco
lkI-
brickwork so
nejita
gtp
ln
se
zh iefze
o
sd
n
e
tio
d
u
jtri
ARBOSL1 I0 co 9
in 0
lse iseanldpo ye
lhtelne
bacn kigo rd.
2. F nxigsandba rcnko
eyib
stn
eclitsa
ldrtl
accod rancew hR tion aigsa
lteu
dliance.
cavity batten to suit SIP system 3. F nxigo rundsmubse tao b
e
wthlto
saitla
nda lsl
requirements by others a
rtnsm eotrdtfm ianh dtorughteRoainste yse
ltm.

primary weather line


11.0 nominal
(tolerance:-2/+3)

primary air barrier line


SIP system

Rev Date By Description


vapour control layer by others
Title:
structural opening

Tremco-Illbruck ME500 internal flexible membrane by Rationel AURA


overall frame

installer for air sealing


TYPICAL HEAD DETAIL
internal finish and air seal by others brick/structural insulated panel

150mm x 3mm galvanised mild steel restraint bracket Scale: 1:2 approx @ A4 Drawing no:
with 2 x No.10x30mm w/screws into frame and fixed
Date: January 2017
into structural insulated panel with shimming as required AURA.W1.01.D.H.001
- all by installer Drawn: Studio62
refer to drg. no. R.BES.RBG.001 for restraint bracket
Status: approved Revision:
design guidance
R

Tremco Illbruck FM230 PU expanding foam by installer

Tremco-Illbruck TP600 compressible seal (25/10-18mm Rationel Windows (UK) Ltd.


40.0 115.0 (115mm mainframe)
nominal or sized to suit finished joint) by installer 7 Avonbury Business Park, Howes Lane,
Bicester, Oxfordshire. OX26 2UA
tel: 01869 248181
fax: 01869 249693
web: www.rationel.co.uk
© Rationel Windows (UK) Ltd. This drawing must not be copied,
reproduced or published in whole or in part for commercial gain
without prior written permission of Rationel Windows (UK) Ltd.
IMPORTANT NOTE: When installing Rationel windows and
accessories, please ensure compliance with national
building regulations and British/European standards where
necessary. This drawing is for guidance only and the
customer must be satisfied that the principles outlined in
this drawing are effectively transposed to suit specific
vapour control layer by others project requirements and site conditions.

m
die
A
w
lre
m
sn
otln
sa
h
ie
sre
ih
row
D
nsn
o
e
.ca
o
.lt
Tremco-Illbruck ME500 internal flexible membrane by
SIP system installer for air sealing NOTES:
1. Exetn rw aleahte so eb
rtha ete lTirem bu lrco
lkI-
internal finish and air seal by others so
nejita
gtp
ln
se
zh iefze
o
sd
n
e
tio
d
u
jtri
ARBOSL1 I0 co 9
in 0
lse iseanldpo ye
lhtelne
150mm x 3mm galvanised mild steel restraint bracket bacn kigo rd.
with 2 x No.10x30mm w/screws into frame and fixed 2. F nxigsandba rcnko
eyib
stn
eclitsa
ldrtl
into structural insulated panel with shimming as required accod rancew hR tion aigsa
lteu
dliance.
150.0

- all by installer 3. F nxigo rundsmubse tao b


e
wthlto
saitla
nda lsl
refer to drg. no. R.BES.RBG.001 for restraint bracket a
rtnsm eotrdtfm ianh dtorughteRoainste yse
ltm.
design guidance
cavity batten to suit SIP system requirements by others
primary weather line
Tremco Illbruck FM230 PU expanding foam by installer
primary air barrier line
Tremco-Illbruck TP600 compressible seal (25/10-18mm
nominal or sized to suit finished joint) by installer
50.0

115.0 (115mm mainframe)


Rev Date By Description

Title:

Rationel AURA
TYPICAL JAMB DETAIL
brick/structural insulated panel

Scale: 1:2 approx @ A4 Drawing no:

Date: January 2017


102.5

brickwork AURA.W1.01.D.J.001
Drawn: Studio62
Status: approved Revision:

40.0
structural opening
Rationel Windows (UK) Ltd.
7 Avonbury Business Park, Howes Lane,
Bicester, Oxfordshire. OX26 2UA
ARBOSIL 1090 silicone to seal between
25.0

tel: 01869 248181


each end of cill and structure by installer fax: 01869 249693
aluminium cill
web: www.rationel.co.uk
11.0 nominal © Rationel Windows (UK) Ltd. This drawing must not be copied,
(tolerance:-2/+3) overall frame reproduced or published in whole or in part for commercial gain
without prior written permission of Rationel Windows (UK) Ltd.
IMPORTANT NOTE: When installing Rationel windows and
*where smaller setback is required, optional ARBOSIL 1090 silicone to seal cill fixing accessories, please ensure compliance with national
please reconsider structural support building regulations and British/European standards where
for the window load Tremco-Illbruck TP600 compressible seal (20/8-15mm necessary. This drawing is for guidance only and the
nominal or sized to suit finished joint) by installer customer must be satisfied that the principles outlined in
this drawing are effectively transposed to suit specific
*60.0 115.0 (115mm mainframe) project requirements and site conditions.
Tremco Illbruck FM230 PU expanding foam by installer
m
die
A
w
lre
m
sn
otln
sa
h
ie
sre
ih
row
D
nsn
o
e
.ca
o
.lt
150mm x 3mm galvanised mild steel restraint bracket NOTES:
with 2 x No.10x40mm w/screws into frame and plugged
and screwed into structure with shimming as required - 1. Exetn rw aleahte so eb
rtha ete lTirem bu lrco
lkI-
all by installer so
nejita
gtp
ln
se
zh iefze
o
sd
n
e
tio
d
u
jtri
refer to drg. no. R.BES.RBG.001 for restraint bracket ARBOSL1 I0 co 9
in 0
lse iseanldpo ye
lhtelne
design guidance bacn kigo rd.
2. F nxigsandba rcnko
eyib
stn
eclitsa
ldrtl
frame extension by others fitted by installer accod rancew hR tion aigsa
lteu
dliance.
3. F nxigo rundsmubse tao b
e
wthlto
saitla
nda lsl
a
rtnsm eotrdtfm ianh dtorughteRoainste yse
ltm.
structural opening

internal finish, air seal and vapour control layer by


overall frame

others

optional Tremco-Illbruck ME500 internal flexible


membrane by installer where/if required for air sealing primary weather line
primary air barrier line

Rev Date By Description


31.0 nominal
(tolerance:-2/+3)

Title:

insulation fixings Rationel AURA


installed by others to TYPICAL CILL DETAIL
manufacturers insulated render/block masonry
recommendations
Scale: 1:2 approx @ A4 Drawing no:

insulated render system - 95mm aluminium cill by others screwed and Date: January 2017
constructed by others to sealed on silicone at interface with frame AURA.W1.02.A.C.001
manufacturers Drawn: Studio62
extension by installer
recommendations PRIOR refer to drg. no. AURA.W1.M.CPG.001 for Status: approved Revision:
TO INSTALLATION OF cill pressing design guidance R
RATIONEL WINDOW
blockwork
Rationel Windows (UK) Ltd.
7 Avonbury Business Park, Howes Lane,
Bicester, Oxfordshire. OX26 2UA
25.0 110.0 190.0
tel: 01869 248181
fax: 01869 249693
web: www.rationel.co.uk
© Rationel Windows (UK) Ltd. This drawing must not be copied,
reproduced or published in whole or in part for commercial gain
without prior written permission of Rationel Windows (UK) Ltd.
IMPORTANT NOTE: When installing Rationel windows and
accessories, please ensure compliance with national
building regulations and British/European standards where
necessary. This drawing is for guidance only and the
customer must be satisfied that the principles outlined in
this drawing are effectively transposed to suit specific
project requirements and site conditions.
110.0 190.0
m
die
A
w
lre
m
sn
otln
sa
h
ie
sre
ih
row
D
nsn
o
e
.ca
o
.lt
90.0 10.0 90.0 NOTES:
1. Exetn rw aleahte so eb
rtha ete lTirem bu lrco
lkI-
so
nejita
gtp
ln
se
zh iefze
o
sd
n
e
tio
d
u
jtri
blockwork ARBOSL1 I0 co 9
in 0
lse iseanldpo ye
lhtelne
insulated render system -
bacn kigo rd.
constructed by others to
2. F nxigsandba rcnko
eyib
stn
eclitsa
ldrtl
manufacturers recommendations
accod rancew hR tion aigsa
lteu
dliance.
PRIOR TO INSTALLATION OF 3. F nxigo rundsmubse tao b
e
wthlto
saitla
nda lsl
RATIONEL WINDOW
a
rtnsm eotrdtfm ianh dtorughteRoainste yse
ltm.

insulation fixings installed


by others to manufacturers
recommendations primary weather line
11.0 nominal
(tolerance:-2/+3)

primary air barrier line

Rev Date By Description

Title:
optional Tremco-Illbruck ME500 internal flexible
structural opening

membrane by installer where/if required for air sealing Rationel AURA


overall frame

internal finish, air seal and vapour control layer by


TYPICAL HEAD DETAIL
insulated render/block masonry
others

150mm x 3mm galvanised mild steel restraint bracket Scale: 1:2 approx @ A4 Drawing no:

with 2 x No.10x30mm w/screws into frame and fixed Date: January 2017
into lintel with shimming as required - all by installer AURA.W1.02.A.H.001
refer to drg. no. R.BES.RBG.001 for restraint bracket Drawn: Studio62
design guidance Status: approved Revision:

R
Tremco Illbruck FM230 PU expanding foam by installer

Tremco-Illbruck TP600 compressible seal (25/10-18mm


nominal or sized to suit finished joint) by installer Rationel Windows (UK) Ltd.
60.0 115.0 (115mm mainframe) 7 Avonbury Business Park, Howes Lane,
Bicester, Oxfordshire. OX26 2UA
tel: 01869 248181
fax: 01869 249693
web: www.rationel.co.uk
© Rationel Windows (UK) Ltd. This drawing must not be copied,
reproduced or published in whole or in part for commercial gain
without prior written permission of Rationel Windows (UK) Ltd.
IMPORTANT NOTE: When installing Rationel windows and
accessories, please ensure compliance with national
building regulations and British/European standards where
optional Tremco-Illbruck ME500 internal flexible necessary. This drawing is for guidance only and the
membrane by installer where/if required for air sealing customer must be satisfied that the principles outlined in
this drawing are effectively transposed to suit specific
internal finish, air seal and vapour control layer by project requirements and site conditions.
others m
die
A
w
lre
m
sn
otln
sa
h
ie
sre
ih
row
D
nsn
o
e
.ca
o
.lt

150mm x 3mm galvanised mild steel restraint bracket NOTES:


with 2 x No.10x30mm w/screws into frame and plugged 1. Exetn rw aleahte so eb
rtha ete lTirem bu lrco
lkI-
and screwed into structure with shimming as required - so
nejita
gtp
ln
se
zh iefze
o
sd
n
e
tio
d
u
jtri
all by installer ARBOSL1 I0 co 9
in 0
lse iseanldpo ye
lhtelne
refer to drg. no. R.BES.RBG.001 for restraint bracket bacn kigo rd.
design guidance 2. F nxigsandba rcnko
eyib
stn
eclitsa
ldrtl
accod rancew hR tion aigsa
lteu
dliance.
Tremco Illbruck FM230 PU expanding foam by installer 3. F nxigo rundsmubse tao b
e
wthlto
saitla
nda lsl
a
rtnsm eotrdtfm ianh dtorughteRoainste yse
ltm.
Tremco-Illbruck TP600 compressible seal (25/10-18mm
190.0

blockwork nominal or sized to suit finished joint) by installer

primary weather line


primary air barrier line

115.0 (115mm mainframe)


Rev Date By Description

Title:

Rationel AURA
insulation fixings installed TYPICAL JAMB DETAIL
by others to manufacturers insulated render/block masonry
recommendations
110.0

Scale: 1:2 approx @ A4 Drawing no:

Date: January 2017


insulated render system - AURA.W1.02.A.J.001
constructed by others to Drawn: Studio62

60.0
manufacturers recommendations Status: approved Revision:
PRIOR TO INSTALLATION OF
R
RATIONEL WINDOW
structural opening

Rationel Windows (UK) Ltd.


7 Avonbury Business Park, Howes Lane,
ARBOSIL 1090 silicone to
25.0
Bicester, Oxfordshire. OX26 2UA
seal between each end of
aluminium cill tel: 01869 248181
cill and structure by installer fax: 01869 249693
11.0 nominal web: www.rationel.co.uk
(tolerance:-2/+3) overall frame
© Rationel Windows (UK) Ltd. This drawing must not be copied,
reproduced or published in whole or in part for commercial gain
without prior written permission of Rationel Windows (UK) Ltd.
*where smaller setback is required, IMPORTANT NOTE: When installing Rationel windows and
please reconsider structural support accessories, please ensure compliance with national
building regulations and British/European standards where
for the window load necessary. This drawing is for guidance only and the
customer must be satisfied that the principles outlined in
115.0 (115mm mainframe) optional ARBOSIL 1090 silicone to seal cill fixing
*60.0 this drawing are effectively transposed to suit specific
project requirements and site conditions.
Tremco-Illbruck TP600 compressible seal (20/8-15mm
nominal or sized to suit finished joint) by installer m
die
A
w
lre
m
sn
otln
sa
h
ie
sre
ih
row
D
nsn
o
e
.ca
o
.lt
NOTES:
Tremco Illbruck FM230 PU expanding foam by installer
1. Exetn rw aleahte so eb
rtha ete lTirem bu lrco
lkI-
125mm x 3mm galvanised mild steel restraint bracket with so
nejita
gtp
ln
se
zh iefze
o
sd
n
e
tio
d
u
jtri
2 x No.10x40mm w/screws into frame and fixed into timber ARBOSL1 I0 co 9
in 0
lse iseanldpo ye
lhtelne
frame structure with shimming as required - all by installer bacn kigo rd.
refer to drg. no. R.BES.RBG.001 for restraint bracket 2. F nxigsandba rcnko
eyib
stn
eclitsa
ldrtl
accod rancew hR tion aigsa
lteu
dliance.
overall frame

design guidance
3. F nxigo rundsmubse tao b
e
wthlto
saitla
nda lsl
structural opening

frame extension by others fitted by installer a


rtnsm eotrdtfm ianh dtorughteRoainste yse
ltm.

internal finish and air seal by others

Tremco-Illbruck ME500 internal flexible membrane by primary weather line


installer for air sealing
primary air barrier line
(tolerance:-2/+3)

Rev Date By Description


31.0 nominal

vapour control Title:


Timber Frame layer by others Rationel AURA
TYPICAL CILL DETAIL
insulated render/timber frame
insulation fixings installed
by others to manufacturers
NOTE: timber frame insulation omitted for clarity Scale: 1:2 approx @ A4 Drawing no:
recommendations
Date: January 2017
insulated render system - 95mm aluminium cill by others screwed and AURA.W1.02.B.C.001
constructed by others to sealed on silicone at interface with frame Drawn: Studio62
manufacturers recommendations extension by installer Status: approved Revision:
PRIOR TO INSTALLATION OF refer to drg. no. AURA.W1.M.CPG.001 for cill
R
RATIONEL WINDOW pressing design guidance
25.0 110.0 18.0 140.0
Rationel Windows (UK) Ltd.
7 Avonbury Business Park, Howes Lane,
Bicester, Oxfordshire. OX26 2UA
tel: 01869 248181
PLEASE NOTE: fax: 01869 249693
this detail assumes there is no differential movement between the web: www.rationel.co.uk
external building finish and the structural timber frame © Rationel Windows (UK) Ltd. This drawing must not be copied,
i.e. - external finish is fixed directly to timber frame and any required reproduced or published in whole or in part for commercial gain
without prior written permission of Rationel Windows (UK) Ltd.
movement joints are outside of the window zone.
110.0 18.0 140.0 IMPORTANT NOTE: When installing Rationel windows and
accessories, please ensure compliance with national
building regulations and British/European standards where
necessary. This drawing is for guidance only and the
customer must be satisfied that the principles outlined in
this drawing are effectively transposed to suit specific
project requirements and site conditions.
insulated render system -
constructed by others to m
die
A
w
lre
m
sn
otln
sa
h
ie
sre
ih
row
D
nsn
o
e
.ca
o
.lt
manufacturers recommendations NOTES:
PRIOR TO INSTALLATION OF
1. Exetn rw aleahte so eb
rtha ete lTirem bu lrco
lkI-
RATIONEL WINDOW
so
nejita
gtp
ln
se
zh iefze
o
sd
n
e
tio
d
u
jtri
ARBOSL1 I0 co 9
in 0
lse iseanldpo ye
lhtelne
insulation fixings installed bacn kigo rd.
by others to manufacturers 2. F nxigsandba rcnko
eyib
stn
eclitsa
ldrtl
recommendations accod rancew hR tion aigsa
lteu
dliance.
3. F nxigo rundsmubse tao b
e
wthlto
saitla
nda lsl
11.0 nominal
(tolerance:-2/+3)

a
rtnsm eotrdtfm ianh dtorughteRoainste yse
ltm.
Timber Frame

primary weather line


primary air barrier line

vapour control layer by others

Tremco-Illbruck ME500 internal flexible membrane by


structural opening

installer where/if required for air sealing

internal finish and air seal by others Rev Date By Description

Tremco Illbruck FM230 PU expanding foam by installer


overall frame

Title:

125mm x 3mm galvanised mild steel restraint bracket with 2 Rationel AURA
x No.10x30mm w/screws into frame and fixed into timber TYPICAL HEAD DETAIL
frame structure with shimming as required - all by installer insulated render/timber frame
refer to drg. no. R.BES.RBG.001 for restraint bracket
design guidance Scale: 1:2 approx @ A4 Drawing no:

Tremco-Illbruck TP600 compressible seal (25/10-18mm Date: January 2017


nominal or sized to suit finished joint) by installer AURA.W1.02.B.H.001
Drawn: Studio62
60.0 115.0 (115mm mainframe) Status: approved Revision:

PLEASE NOTE: Rationel Windows (UK) Ltd.


this detail assumes there is no differential movement between the 7 Avonbury Business Park, Howes Lane,
Bicester, Oxfordshire. OX26 2UA
external building finish and the structural timber frame
i.e. - external finish is fixed directly to timber frame and any required tel: 01869 248181
fax: 01869 249693
movement joints are outside of the window zone. web: www.rationel.co.uk
© Rationel Windows (UK) Ltd. This drawing must not be copied,
reproduced or published in whole or in part for commercial gain
without prior written permission of Rationel Windows (UK) Ltd.
IMPORTANT NOTE: When installing Rationel windows and
accessories, please ensure compliance with national
vapour control layer by others building regulations and British/European standards where
necessary. This drawing is for guidance only and the
customer must be satisfied that the principles outlined in
Tremco-Illbruck ME500 internal flexible membrane by this drawing are effectively transposed to suit specific
installer for air sealing project requirements and site conditions.

internal finish and air seal by others m


die
A
w
lre
m
sn
otln
sa
h
ie
sre
ih
row
D
nsn
o
e
.ca
o
.lt
NOTES:
125mm x 3mm galvanised mild steel restraint bracket
1. Exetn rw aleahte so eb
rtha ete lTirem bu lrco
lkI-
with 2 x No.10x30mm w/screws into frame and fixed
so
nejita
gtp
ln
se
zh iefze
o
sd
n
e
tio
d
u
jtri
Timber Frame into timber frame structure with shimming as required -
ARBOSL1 I0 co 9
in 0
lse iseanldpo ye
lhtelne
all by installer
bacn kigo rd.
refer to drg. no. R.BES.RBG.001 for restraint bracket
2. F nxigsandba rcnko
eyib
stn
eclitsa
ldrtl
design guidance
accod rancew hR tion aigsa
lteu
dliance.
3. F nxigo rundsmubse tao b
e
wthlto
saitla
nda lsl
Tremco Illbruck FM230 PU expanding foam by installer
a
rtnsm eotrdtfm ianh dtorughteRoainste yse
ltm.
Tremco-Illbruck TP600 compressible seal (25/10-18mm
nominal or sized to suit finished joint) by installer
140.0

primary weather line


primary air barrier line

115.0 (115mm mainframe)


18.0

Rev Date By Description

Title:

Rationel AURA
insulation fixings installed TYPICAL JAMB DETAIL
by others to manufacturers insulated render/timber frame
recommendations
Scale: 1:2 approx @ A4 Drawing no:
110.0

Date: January 2017


insulated render system - AURA.W1.02.B.J.001
PLEASE NOTE: Drawn: Studio62
constructed by others to 60.0 this detail assumes there is no differential
manufacturers recommendations movement between the external building Status: approved Revision:
PRIOR TO INSTALLATION OF finish and the structural timber frame R

RATIONEL WINDOW i.e. - external finish is fixed directly to


structural opening timber frame and any required movement
joints are outside of the window zone. Rationel Windows (UK) Ltd.
7 Avonbury Business Park, Howes Lane,
ARBOSIL 1090 silicone to seal between
25.0

Bicester, Oxfordshire. OX26 2UA


each end of cill and structure by installer tel: 01869 248181
aluminium cill fax: 01869 249693
11.0 nominal web: www.rationel.co.uk
(tolerance:-2/+3) overall frame
© Rationel Windows (UK) Ltd. This drawing must not be copied,
reproduced or published in whole or in part for commercial gain
without prior written permission of Rationel Windows (UK) Ltd.
IMPORTANT NOTE: When installing Rationel windows and
accessories, please ensure compliance with national
*where smaller setback is required, optional ARBOSIL 1090 silicone to seal cill fixing building regulations and British/European standards where
please reconsider structural support necessary. This drawing is for guidance only and the
Tremco-Illbruck TP600 compressible seal (20/8-15mm customer must be satisfied that the principles outlined in
for the window load this drawing are effectively transposed to suit specific
nominal or sized to suit finished joint) by installer project requirements and site conditions.
*60.0 115.0 (115mm mainframe)
Tremco Illbruck FM230 PU expanding foam by installer m
die
A
w
lre
m
sn
otln
sa
h
ie
sre
ih
row
D
nsn
o
e
.ca
o
.lt
NOTES:
125mm x 3mm galvanised mild steel restraint bracket
1. Exetn rw aleahte so eb
rtha ete lTirem bu lrco
lkI-
with 2 x No.10x40mm w/screws into frame and fixed
so
nejita
gtp
ln
se
zh iefze
o
sd
n
e
tio
d
u
jtri
into steel frame structure with shimming as required -
ARBOSL1 I0 co 9
in 0
lse iseanldpo ye
lhtelne
all by installer
bacn kigo rd.
refer to drg. no. R.BES.RBG.001 for restraint bracket
2. F nxigsandba rcnko
eyib
stn
eclitsa
ldrtl
design guidance
accod rancew hR tion aigsa
lteu
dliance.
frame extension by others fitted by installer 3. F nxigo rundsmubse tao b
e
wthlto
saitla
nda lsl
a
rtnsm eotrdtfm ianh dtorughteRoainste yse
ltm.
structural opening

internal finish, air seal and vapour control layer by


overall frame

others

optional Tremco-Illbruck ME500 internal flexible primary weather line


membrane by installer where/if required for air sealing primary air barrier line

Rev Date By Description


31.0 nominal
(tolerance:-2/+3)

Title:

Rationel AURA
insulation fixings installed TYPICAL CILL DETAIL
by others to manufacturers steel frame system insulated render/steel frame system
recommendations
Scale: 1:2 approx @ A4 Drawing no:
95mm aluminium cill by others screwed and
sealed on silicone at interface with frame Date: January 2017
insulated render system - AURA.W1.02.C.C.001
extension by installer Drawn: Studio62
constructed by others to
refer to drg. no. AURA.W1.M.CPG.001 for
manufacturers Status: approved Revision:
cill pressing design guidance
recommendations PRIOR R
TO INSTALLATION OF
RATIONEL WINDOW
NOTE: steel frame insulation omitted for clarity Rationel Windows (UK) Ltd.
7 Avonbury Business Park, Howes Lane,
Bicester, Oxfordshire. OX26 2UA

154.0 (including track) tel: 01869 248181


25.0 110.0 18.0
fax: 01869 249693
web: www.rationel.co.uk
© Rationel Windows (UK) Ltd. This drawing must not be copied,
reproduced or published in whole or in part for commercial gain
without prior written permission of Rationel Windows (UK) Ltd.
IMPORTANT NOTE: When installing Rationel windows and
accessories, please ensure compliance with national
building regulations and British/European standards where
necessary. This drawing is for guidance only and the
customer must be satisfied that the principles outlined in
this drawing are effectively transposed to suit specific
project requirements and site conditions.
110.0 18.0 154.0 (including track)
m
die
A
w
lre
m
sn
otln
sa
h
ie
sre
ih
row
D
nsn
o
e
.ca
o
.lt
NOTES:
1. Exetn rw aleahte so eb
rtha ete lTirem bu lrco
lkI-
so
nejita
gtp
ln
se
zh iefze
o
sd
n
e
tio
d
u
jtri
ARBOSL1 I0 co 9
in 0
lse iseanldpo ye
lhtelne
insulated render system - steel frame system bacn kigo rd.
constructed by others to
2. F nxigsandba rcnko
eyib
stn
eclitsa
ldrtl
manufacturers recommendations
accod rancew hR tion aigsa
lteu
dliance.
PRIOR TO INSTALLATION OF
3. F nxigo rundsmubse tao b
e
wthlto
saitla
nda lsl
RATIONEL WINDOW
a
rtnsm eotrdtfm ianh dtorughteRoainste yse
ltm.

insulation fixings installed


by others to manufacturers
recommendations primary weather line
11.0 nominal
(tolerance:-2/+3)

primary air barrier line

Rev Date By Description

Title:
optional Tremco-Illbruck ME500 internal flexible
structural opening

membrane by installer where/if required for air sealing Rationel AURA


overall frame

internal finish, air seal and vapour control layer by


TYPICAL HEAD DETAIL
insulated render/steel frame system
others

125mm x 3mm galvanised mild steel restraint bracket Scale: 1:2 approx @ A4 Drawing no:

with 2 x No.10x30mm w/screws into frame and fixed Date: January 2017
into steel frame structure with shimming as required - AURA.W1.02.C.H.001
all by installer Drawn: Studio62
refer to drg. no. R.BES.RBG.001 for restraint bracket Status: approved Revision:
design guidance R

Tremco Illbruck FM230 PU expanding foam by installer

Tremco-Illbruck TP600 compressible seal (25/10-18mm Rationel Windows (UK) Ltd.


60.0 115.0 (115mm mainframe) 7 Avonbury Business Park, Howes Lane,
nominal or sized to suit finished joint) by installer Bicester, Oxfordshire. OX26 2UA
tel: 01869 248181
fax: 01869 249693
web: www.rationel.co.uk
© Rationel Windows (UK) Ltd. This drawing must not be copied,
reproduced or published in whole or in part for commercial gain
without prior written permission of Rationel Windows (UK) Ltd.
IMPORTANT NOTE: When installing Rationel windows and
optional Tremco-Illbruck ME500 internal flexible accessories, please ensure compliance with national
building regulations and British/European standards where
membrane by installer where/if required for air sealing necessary. This drawing is for guidance only and the
customer must be satisfied that the principles outlined in
internal finish, air seal and vapour control layer by this drawing are effectively transposed to suit specific
others project requirements and site conditions.

m
die
A
w
lre
m
sn
otln
sa
h
ie
sre
ih
row
D
nsn
o
e
.ca
o
.lt
125mm x 3mm galvanised mild steel restraint bracket
NOTES:
with 2 x No.10x30mm w/screws into frame and fixed
into steel frame structure with shimming as required - 1. Exetn rw aleahte so eb
rtha ete lTirem bu lrco
lkI-
all by installer so
nejita
gtp
ln
se
zh iefze
o
sd
n
e
tio
d
u
jtri
refer to drg. no. R.BES.RBG.001 for restraint bracket ARBOSL1 I0 co 9
in 0
lse iseanldpo ye
lhtelne
design guidance bacn kigo rd.
2. F nxigsandba rcnko
eyib
stn
eclitsa
ldrtl
154.0 (including track)

Tremco Illbruck FM230 PU expanding foam by installer accod rancew hR tion aigsa
lteu
dliance.
3. F nxigo rundsmubse tao b
e
wthlto
saitla
nda lsl
Tremco-Illbruck TP600 compressible seal (25/10-18mm a
rtnsm eotrdtfm ianh dtorughteRoainste yse
ltm.
steel frame system nominal or sized to suit finished joint) by installer

primary weather line


primary air barrier line

115.0 (115mm mainframe)


18.0

Rev Date By Description

Title:

insulation fixings installed Rationel AURA


by others to manufacturers TYPICAL JAMB DETAIL
recommendations insulated render/steel frame system
110.0

Scale: 1:2 approx @ A4 Drawing no:

insulated render system - Date: January 2017


constructed by others to AURA.W1.02.C.J.001
Studio62

60.0
manufacturers recommendations Drawn:

PRIOR TO INSTALLATION OF Status: approved Revision:


RATIONEL WINDOW structural opening R

ARBOSIL 1090 silicone to seal between Rationel Windows (UK) Ltd.


25.0 7 Avonbury Business Park, Howes Lane,
each end of cill and structure by installer Bicester, Oxfordshire. OX26 2UA
aluminium cill
11.0 nominal tel: 01869 248181
(tolerance:-2/+3) overall frame fax: 01869 249693
web: www.rationel.co.uk
© Rationel Windows (UK) Ltd. This drawing must not be copied,
reproduced or published in whole or in part for commercial gain
without prior written permission of Rationel Windows (UK) Ltd.
IMPORTANT NOTE: When installing Rationel windows and
optional ARBOSIL 1090 silicone to seal cill fixing accessories, please ensure compliance with national
*where smaller setback is required, building regulations and British/European standards where
please reconsider structural support Tremco-Illbruck TP600 compressible seal (20/8-15mm necessary. This drawing is for guidance only and the
customer must be satisfied that the principles outlined in
for the window load nominal or sized to suit finished joint) by installer this drawing are effectively transposed to suit specific
project requirements and site conditions.
*60.0 115.0 (115mm mainframe) Tremco Illbruck FM230 PU expanding foam by installer
m
die
A
w
lre
m
sn
otln
sa
h
ie
sre
ih
row
D
nsn
o
e
.ca
o
.lt
125mm x 3mm galvanised mild steel restraint bracket NOTES:
with 2 x No.10x40mm w/screws into frame and fixed 1. Exetn rw aleahte so eb
rtha ete lTirem bu lrco
lkI-
into structural insulated panel with shimming as required so
nejita
gtp
ln
se
zh iefze
o
sd
n
e
tio
d
u
jtri
- all by installer ARBOSL1 I0 co 9
in 0
lse iseanldpo ye
lhtelne
refer to drg. no. R.BES.RBG.001 for restraint bracket bacn kigo rd.
design guidance 2. F nxigsandba rcnko
eyib
stn
eclitsa
ldrtl
accod rancew hR tion aigsa
lteu
dliance.
frame extension by others fitted by installer 3. F nxigo rundsmubse tao b
e
wthlto
saitla
nda lsl
a
rtnsm eotrdtfm ianh dtorughteRoainste yse
ltm.
internal finish and air seal by others
structural opening

overall frame

Tremco-Illbruck ME500 internal flexible membrane by


installer for air sealing
primary weather line
vapour control layer by others primary air barrier line

Rev Date By Description


31.0 nominal
(tolerance:-2/+3)

Title:

Rationel AURA
insulation fixings installed SIP system TYPICAL CILL DETAIL
by others to manufacturers insulated render/structural insulated panel
recommendations
Scale: 1:2 approx @ A4 Drawing no:

Date: January 2017


insulated render system - AURA.W1.02.D.C.001
constructed by others to 95mm aluminium cill by others screwed and Drawn: Studio62
manufacturers recommendations sealed on silicone at interface with frame Status: approved Revision:
PRIOR TO INSTALLATION OF extension by installer
R
RATIONEL WINDOW refer to drg. no. AURA.W1.M.CPG.001 for
cill pressing design guidance

Rationel Windows (UK) Ltd.


7 Avonbury Business Park, Howes Lane,
Bicester, Oxfordshire. OX26 2UA
tel: 01869 248181
25.0 110.0 150.0
fax: 01869 249693
web: www.rationel.co.uk
© Rationel Windows (UK) Ltd. This drawing must not be copied,
reproduced or published in whole or in part for commercial gain
without prior written permission of Rationel Windows (UK) Ltd.
IMPORTANT NOTE: When installing Rationel windows and
accessories, please ensure compliance with national
building regulations and British/European standards where
necessary. This drawing is for guidance only and the
customer must be satisfied that the principles outlined in
this drawing are effectively transposed to suit specific
project requirements and site conditions.
110.0 150.0
m
die
A
w
lre
m
sn
otln
sa
h
ie
sre
ih
row
D
nsn
o
e
.ca
o
.lt
NOTES:
1. Exetn rw aleahte so eb
rtha ete lTirem bu lrco
lkI-
so
nejita
gtp
ln
se
zh iefze
o
sd
n
e
tio
d
u
jtri
ARBOSL1 I0 co 9
in 0
lse iseanldpo ye
lhtelne
insulated render system -
bacn kigo rd.
constructed by others to
2. F nxigsandba rcnko
eyib
stn
eclitsa
ldrtl
manufacturers recommendations
accod rancew hR tion aigsa
lteu
dliance.
PRIOR TO INSTALLATION OF
3. F nxigo rundsmubse tao b
e
wthlto
saitla
nda lsl
RATIONEL WINDOW
a
rtnsm eotrdtfm ianh dtorughteRoainste yse
ltm.

insulation fixings installed


by others to manufacturers
recommendations primary weather line
11.0 nominal
(tolerance:-2/+3)

primary air barrier line


SIP system

Rev Date By Description


vapour control layer by others
Title:
structural opening

Tremco-Illbruck ME500 internal flexible membrane by Rationel AURA


overall frame

installer for air sealing


TYPICAL HEAD DETAIL
internal finish and air seal by others insulated render/structural insulated panel

125mm x 3mm galvanised mild steel restraint bracket Scale: 1:2 approx @ A4 Drawing no:
with 2 x No.10x30mm w/screws into frame and fixed
Date: January 2017
into structural insulated panel with shimming as required AURA.W1.02.D.H.001
- all by installer Drawn: Studio62
refer to drg. no. R.BES.RBG.001 for restraint bracket
Status: approved Revision:
design guidance
R

Tremco Illbruck FM230 PU expanding foam by installer

Tremco-Illbruck TP600 compressible seal (25/10-18mm Rationel Windows (UK) Ltd.


60.0 115.0 (115mm mainframe)
nominal or sized to suit finished joint) by installer 7 Avonbury Business Park, Howes Lane,
Bicester, Oxfordshire. OX26 2UA
tel: 01869 248181
fax: 01869 249693
web: www.rationel.co.uk
© Rationel Windows (UK) Ltd. This drawing must not be copied,
reproduced or published in whole or in part for commercial gain
without prior written permission of Rationel Windows (UK) Ltd.
IMPORTANT NOTE: When installing Rationel windows and
accessories, please ensure compliance with national
vapour control layer by others building regulations and British/European standards where
necessary. This drawing is for guidance only and the
customer must be satisfied that the principles outlined in
Tremco-Illbruck ME500 internal flexible membrane by this drawing are effectively transposed to suit specific
installer for air sealing project requirements and site conditions.

m
die
A
w
lre
m
sn
otln
sa
h
ie
sre
ih
row
D
nsn
o
e
.ca
o
.lt
internal finish and air seal by others
NOTES:
125mm x 3mm galvanised mild steel restraint bracket 1. Exetn rw aleahte so eb
rtha ete lTirem bu lrco
lkI-
with 2 x No.10x30mm w/screws into frame and fixed so
nejita
gtp
ln
se
zh iefze
o
sd
n
e
tio
d
u
jtri
into structural insulated panel with shimming as required ARBOSL1 I0 co 9
in 0
lse iseanldpo ye
lhtelne
- all by installer bacn kigo rd.
refer to drg. no. R.BES.RBG.001 for restraint bracket 2. F nxigsandba rcnko
eyib
stn
eclitsa
ldrtl
design guidance accod rancew hR tion aigsa
lteu
dliance.
SIP system 3. F nxigo rundsmubse tao b
e
wthlto
saitla
nda lsl
Tremco Illbruck FM230 PU expanding foam by installer a
rtnsm eotrdtfm ianh dtorughteRoainste yse
ltm.

Tremco-Illbruck TP600 compressible seal (25/10-18mm


nominal or sized to suit finished joint) by installer
primary weather line
150.0

primary air barrier line

115.0 (115mm mainframe)


Rev Date By Description

Title:

Rationel AURA
TYPICAL JAMB DETAIL
insulation fixings installed by insulated render/structural insulated panel
others to manufacturers
recommendations Scale: 1:2 approx @ A4 Drawing no:
110.0

Date: January 2017


AURA.W1.02.D.J.001
insulated render system - Drawn: Studio62
constructed by others to Status: approved Revision:

60.0
manufacturers recommendations R
PRIOR TO INSTALLATION OF
RATIONEL WINDOW structural opening
Rationel Windows (UK) Ltd.
7 Avonbury Business Park, Howes Lane,
Bicester, Oxfordshire. OX26 2UA
ARBOSIL 1090 silicone to seal between
25.0

tel: 01869 248181


each end of cill and structure by installer fax: 01869 249693
aluminium cill
web: www.rationel.co.uk
11.0 nominal
(tolerance:-2/+3) overall frame © Rationel Windows (UK) Ltd. This drawing must not be copied,
reproduced or published in whole or in part for commercial gain
without prior written permission of Rationel Windows (UK) Ltd.
IMPORTANT NOTE: When installing Rationel windows and
optional ARBOSIL 1090 silicone to seal cill fixing accessories, please ensure compliance with national
building regulations and British/European standards where
Tremco-Illbruck TP600 compressible seal (20/8-15mm necessary. This drawing is for guidance only and the
nominal or sized to suit finished joint) by installer customer must be satisfied that the principles outlined in
this drawing are effectively transposed to suit specific
60.0 115.0 (115mm mainframe) project requirements and site conditions.
Tremco Illbruck FM230 PU expanding foam by installer
m
die
A
w
lre
m
sn
otln
sa
h
ie
sre
ih
row
D
nsn
o
e
.ca
o
.lt
175mm x 3mm galvanised mild steel restraint bracket NOTES:
with 2 x No.10x40mm w/screws into frame and plugged
and screwed into structure with shimming as required - 1. Exetn rw aleahte so eb
rtha ete lTirem bu lrco
lkI-
all by installer so
nejita
gtp
ln
se
zh iefze
o
sd
n
e
tio
d
u
jtri
refer to drg. no. R.BES.RBG.001 for restraint bracket ARBOSL1 I0 co 9
in 0
lse iseanldpo ye
lhtelne
design guidance bacn kigo rd.
2. F nxigsandba rcnko
eyib
stn
eclitsa
ldrtl
frame extension by others fitted by installer accod rancew hR tion aigsa
lteu
dliance.
3. F nxigo rundsmubse tao b
e
wthlto
saitla
nda lsl
a
rtnsm eotrdtfm ianh dtorughteRoainste yse
ltm.
structural opening

internal finish, air seal and vapour control layer by


overall frame

others

optional Tremco-Illbruck ME500 internal flexible


membrane by installer where/if required for air sealing primary weather line
primary air barrier line

Rev Date By Description


31.0 nominal
(tolerance:-2/+3)

Title:

Rationel AURA
TYPICAL CILL DETAIL
rendered block/block masonry
cavity closer leg must not impede
19 x 19mm treated s/w batten sealing grounds Scale: 1:2 approx @ A4 Drawing no:

by others as stop end for Date: January 2017


render - to be installed PRIOR local 50 x 3mm GMS bearing plate AURA.W1.03.A.C.001
TO INSTALLATION OF by installer bedded on silicone Drawn: Studio62
RATIONEL WINDOW Status: approved Revision:
95mm aluminium cill by others screwed R

and sealed on silicone at interface with


blockwork to be rendered by frame extension by installer
others blockwork
refer to drg. no. AURA.W1.M.CPG.001
Rationel Windows (UK) Ltd.
for cill pressing design guidance 7 Avonbury Business Park, Howes Lane,
Bicester, Oxfordshire. OX26 2UA
25.0 20.0 100.0 100.0 100.0
tel: 01869 248181
fax: 01869 249693
NOTE: cavity wall insulation omitted for clarity web: www.rationel.co.uk
© Rationel Windows (UK) Ltd. This drawing must not be copied,
reproduced or published in whole or in part for commercial gain
without prior written permission of Rationel Windows (UK) Ltd.
IMPORTANT NOTE: When installing Rationel windows and
accessories, please ensure compliance with national
building regulations and British/European standards where
necessary. This drawing is for guidance only and the
customer must be satisfied that the principles outlined in
this drawing are effectively transposed to suit specific
project requirements and site conditions.
20.0 100.0 100.0 100.0
m
die
A
w
lre
m
sn
otln
sa
h
ie
sre
ih
row
D
nsn
o
e
.ca
o
.lt
NOTES:
1. Exetn rw aleahte so eb
rtha ete lTirem bu lrco
lkI-
blockwork so
nejita
gtp
ln
se
zh iefze
o
sd
n
e
tio
d
u
jtri
ARBOSL1 I0 co 9
in 0
lse iseanldpo ye
lhtelne
bacn kigo rd.
2. F nxigsandba rcnko
eyib
stn
eclitsa
ldrtl
blockwork to be rendered by accod rancew hR tion aigsa
lteu
dliance.
others 3. F nxigo rundsmubse tao b
e
wthlto
saitla
nda lsl
a
rtnsm eotrdtfm ianh dtorughteRoainste yse
ltm.

primary weather line


11.0 nominal
(tolerance:-2/+3)

primary air barrier line

Rev Date By Description

Title:
optional Tremco-Illbruck ME500 internal flexible
structural opening

membrane by installer where/if required for air sealing Rationel AURA


overall frame

internal finish, air seal and vapour control layer by


TYPICAL HEAD DETAIL
rendered block/block masonry
others

175mm x 3mm galvanised mild steel restraint bracket Scale: 1:2 approx @ A4 Drawing no:

with 2 x No.10x30mm w/screws into frame and fixed Date: January 2017
into lintel with shimming as required - all by installer AURA.W1.03.A.H.001
refer to drg. no. R.BES.RBG.001 for restraint bracket Drawn: Studio62
design guidance Status: approved Revision:

R
Tremco Illbruck FM230 PU expanding foam by installer

Tremco-Illbruck TP600 compressible seal (25/10-18mm


nominal or sized to suit finished joint) by installer Rationel Windows (UK) Ltd.
60.0 115.0 (115mm mainframe) 7 Avonbury Business Park, Howes Lane,
Bicester, Oxfordshire. OX26 2UA
tel: 01869 248181
fax: 01869 249693
web: www.rationel.co.uk
© Rationel Windows (UK) Ltd. This drawing must not be copied,
reproduced or published in whole or in part for commercial gain
without prior written permission of Rationel Windows (UK) Ltd.
IMPORTANT NOTE: When installing Rationel windows and
accessories, please ensure compliance with national
building regulations and British/European standards where
optional Tremco-Illbruck ME500 internal flexible necessary. This drawing is for guidance only and the
membrane by installer where/if required for air sealing customer must be satisfied that the principles outlined in
this drawing are effectively transposed to suit specific
internal finish, air seal and vapour control layer by project requirements and site conditions.
others m
die
A
w
lre
m
sn
otln
sa
h
ie
sre
ih
row
D
nsn
o
e
.ca
o
.lt
blockwork NOTES:
175mm x 3mm galvanised mild steel restraint bracket
with 2 x No.10x30mm w/screws into frame and plugged 1. Exetn rw aleahte so eb
rtha ete lTirem bu lrco
lkI-
and screwed into structure with shimming as required - so
nejita
gtp
ln
se
zh iefze
o
sd
n
e
tio
d
u
jtri
100.0

all by installer ARBOSL1 I0 co 9


in 0
lse iseanldpo ye
lhtelne
refer to drg. no. R.BES.RBG.001 for restraint bracket bacn kigo rd.
design guidance 2. F nxigsandba rcnko
eyib
stn
eclitsa
ldrtl
accod rancew hR tion aigsa
lteu
dliance.
cavity closer by others - leg must not impede sealing grounds 3. F nxigo rundsmubse tao b
e
wthlto
saitla
nda lsl
a
rtnsm eotrdtfm ianh dtorughteRoainste yse
ltm.
Tremco Illbruck FM230 PU expanding foam by installer

Tremco-Illbruck TP600 compressible seal (25/10-18mm


nominal or sized to suit finished joint) by installer primary weather line
primary air barrier line
100.0

115.0 (115mm mainframe)


Rev Date By Description

Title:

Rationel AURA
19 x 19mm treated s/w batten
by others as stop end for TYPICAL JAMB DETAIL
render - to be installed PRIOR rendered block/block masonry
TO INSTALLATION OF
RATIONEL WINDOW Scale: 1:2 approx @ A4 Drawing no:
100.0

Date: January 2017


AURA.W1.03.A.J.001
Drawn: Studio62
blockwork to be rendered by Status: approved Revision:
others R

60.0
overall frame Rationel Windows (UK) Ltd.
20.0

7 Avonbury Business Park, Howes Lane,


structural opening Bicester, Oxfordshire. OX26 2UA
tel: 01869 248181
aluminium cill fax: 01869 249693
25.0

ARBOSIL 1090 silicone to web: www.rationel.co.uk


seal between each end of cill 11.0 nominal © Rationel Windows (UK) Ltd. This drawing must not be copied,
and structure by installer reproduced or published in whole or in part for commercial gain
(tolerance:-2/+3)
without prior written permission of Rationel Windows (UK) Ltd.
optional ARBOSIL 1090 silicone to seal cill fixing
IMPORTANT NOTE: When installing Rationel windows and
*60.0 115.0 (115mm mainframe) accessories, please ensure compliance with national
Tremco-Illbruck TimberMax compressible seal sized to building regulations and British/European standards where
suit finished joint by installer - size to be adjusted to necessary. This drawing is for guidance only and the
suit projected settlement and installed strictly in customer must be satisfied that the principles outlined in
this drawing are effectively transposed to suit specific
accordance with manufacturers instructions
project requirements and site conditions.
31mm + settlement 'X' (refer to table below)

Tremco Illbruck FM230 PU expanding foam by installer m


die
A
w
lre
m
sn
otln
sa
h
ie
sre
ih
row
D
nsn
o
e
.ca
o
.lt
NOTES:
150mm x 3mm galvanised mild steel restraint bracket with
2 x No.10x40mm w/screws into frame and fixed into timber 1. Exetn rw aleahte so eb
rtha ete lTirem bu lrco
lkI-
frame structure with shimming as required - all by installer so
nejita
gtp
ln
se
zh iefze
o
sd
n
e
tio
d
u
jtri
structural opening
refer to drg. no. R.BES.RBG.001 for restraint bracket ARBOSL1 I0 co 9
in 0
lse iseanldpo ye
lhtelne
overall frame design guidance bacn kigo rd.
settlement 2. F nxigsandba rcnko
eyib
stn
eclitsa
ldrtl
frame extension by others fitted by installer accod rancew hR tion aigsa
lteu
dliance.
3. F nxigo rundsmubse tao b
e
wthlto
saitla
nda lsl
internal finishand air seal by others a
rtnsm eotrdtfm ianh dtorughteRoainste yse
ltm.

optional Tremco-Illbruck ME500 internal flexible


membrane by installer where/if required for air sealing
primary weather line
primary air barrier line

static vapour control


initial tape dim = 11mm + settlement 'X'

Timber Frame layer by others


Rev Date By Description
settlement
Title:
start
19 x 19mm treated s/w batten Rationel AURA
by others as stop end for finish TYPICAL CILL DETAIL
render - to be installed PRIOR loadbearing cavity batten to suit timber frame rendered blockwork/timber frame
TO INSTALLATION OF requirements by others
RATIONEL WINDOW Scale: 1:2 approx @ A4 Drawing no:
95mm aluminium cill by others screwed and sealed on
blockwork to be rendered by silicone at interface with frame extension by installer Date: January 2017
others refer to drg. no. AURA.W1.M.CPG.001 for cill pressing AURA.W1.03.B.C.001
Drawn: Studio62
design guidance
25.0 20.0 100.0 50.0 12.0 140.0 Status: approved Revision:

settlement 'X' per storey (up to 5 stories) NOTES:


- *window setback dimension to be adjusted to ensure that required Tremco
location
using solid timber using engineered
Illbruck tape width does not encroach over timber frame structure - refer to Rationel Windows (UK) Ltd.
joist floors (mm) i-joist floors (mm) 7 Avonbury Business Park, Howes Lane,
manufacturers literature for tape size in relation to storey settlement Bicester, Oxfordshire. OX26 2UA
ground storey 3 3
- timber frame insulation omitted for clarity
first storey 12 9 tel: 01869 248181
- window fixings must be to timber frame only, NOT to external structure/finish
second storey 21 15 fax: 01869 249693
which remains static during settlement web: www.rationel.co.uk
third storey 30 21 - data in adjacent table is to be used in absence of project specific calculations
fourth storey 39 27 © Rationel Windows (UK) Ltd. This drawing must not be copied,
and assumes use of timber with moisture content of less than 20% bearing on reproduced or published in whole or in part for commercial gain
fifth storey 48 33 concrete ground floor without prior written permission of Rationel Windows (UK) Ltd.
Source: LABC warranty technical manual v.7
20.0 100.0 50.0 12.0 140.0 IMPORTANT NOTE: When installing Rationel windows and
accessories, please ensure compliance with national
building regulations and British/European standards where
necessary. This drawing is for guidance only and the
customer must be satisfied that the principles outlined in
this drawing are effectively transposed to suit specific
final tape dim = 11mm + settlement 'X'
project requirements and site conditions.
blockwork to be rendered by
m
die
A
w
lre
m
sn
otln
sa
h
ie
sre
ih
row
D
nsn
o
e
.ca
o
.lt
others
NOTES:
1. Exetn rw aleahte so eb
rtha ete lTirem bu lrco
lkI-
so
nejita
gtp
ln
se
zh iefze
o
sd
n
e
tio
d
u
jtri
cavity batten to suit timber frame
ARBOSL1 I0 co 9
in 0
lse iseanldpo ye
lhtelne
requirements by others
bacn kigo rd.
start 2. F nxigsandba rcnko
eyib
stn
eclitsa
ldrtl
static accod rancew hR tion aigsa
lteu
dliance.
finish 3. F nxigo rundsmubse tao b
e
wthlto
saitla
nda lsl
settlement
a
rtnsm eotrdtfm ianh dtorughteRoainste yse
ltm.
Timber Frame

primary weather line


primary air barrier line

vapour control layer by others

Tremco-Illbruck ME500 internal flexible membrane by


structural opening

installer where/if required for air sealing

internal finish and air seal by others Rev Date By Description


settlement
Tremco Illbruck FM230 PU expanding foam by installer
overall frame

Title:

150mm x 3mm galvanised mild steel restraint bracket with Rationel AURA
2 x No.10x30mm w/screws into frame and fixed into timber TYPICAL HEAD DETAIL
frame structure with shimming as required - all by installer rendered blockwork/timber frame
refer to drg. no. R.BES.RBG.001 for restraint bracket
design guidance Scale: 1:2 approx @ A4 Drawing no:

Tremco-Illbruck TimberMax compressible seal sized to Date: January 2017


AURA.W1.03.B.H.001
suit finished joint by installer - size to be adjusted to Drawn: Studio62
115.0 (115mm mainframe) suit projected settlement and installed strictly in
*60.0 Status: approved Revision:
accordance with manufacturers instructions
R

settlement 'X' per storey (up to 5 stories) NOTES:


- *window setback dimension to be adjusted to ensure that required Tremco
location
using solid timber using engineered
Illbruck tape width does not encroach over timber frame structure - refer to Rationel Windows (UK) Ltd.
joist floors (mm) i-joist floors (mm) 7 Avonbury Business Park, Howes Lane,
manufacturers literature for tape size in relation to storey settlement Bicester, Oxfordshire. OX26 2UA
ground storey 3 3
- timber frame insulation omitted for clarity
first storey 12 9 tel: 01869 248181
- window fixings must be to timber frame only, NOT to external structure/finish
second storey 21 15 fax: 01869 249693
which remains static during settlement web: www.rationel.co.uk
third storey 30 21 - data in adjacent table is to be used in absence of project specific calculations
fourth storey 39 27 © Rationel Windows (UK) Ltd. This drawing must not be copied,
and assumes use of timber with moisture content of less than 20% bearing on reproduced or published in whole or in part for commercial gain
fifth storey 48 33 concrete ground floor without prior written permission of Rationel Windows (UK) Ltd.
Source: LABC warranty technical manual v.7
IMPORTANT NOTE: When installing Rationel windows and
accessories, please ensure compliance with national
building regulations and British/European standards where
vapour control layer by others necessary. This drawing is for guidance only and the
customer must be satisfied that the principles outlined in
this drawing are effectively transposed to suit specific
Tremco-Illbruck ME500 internal flexible membrane by project requirements and site conditions.
Timber Frame installer for air sealing m
die
A
w
lre
m
sn
otln
sa
h
ie
sre
ih
row
D
nsn
o
e
.ca
o
.lt
NOTES:
internal finish and air seal by others
1. Exetn rw aleahte so eb
rtha ete lTirem bu lrco
lkI-
150mm x 3mm galvanised mild steel restraint bracket with so
nejita
gtp
ln
se
zh iefze
o
sd
n
e
tio
d
u
jtri
2 x No.10x30mm w/screws into frame and fixed into timber ARBOSL1 I0 co 9
in 0
lse iseanldpo ye
lhtelne
frame structure with shimming as required - all by installer bacn kigo rd.
refer to drg. no. R.BES.RBG.001 for restraint bracket 2. F nxigsandba rcnko
eyib
stn
eclitsa
ldrtl
design guidance
140.0

accod rancew hR tion aigsa


lteu
dliance.
3. F nxigo rundsmubse tao b
e
wthlto
saitla
nda lsl
cavity batten to suit timber frame requirements by others
a
rtnsm eotrdtfm ianh dtorughteRoainste yse
ltm.
Tremco Illbruck FM230 PU expanding foam by installer

Tremco-Illbruck TP600 compressible seal (20/8-15mm


nominal or sized to suit finished joint) by installer primary weather line
primary air barrier line
NOTE - window fixings must be to timber frame only, NOT to external
structure/finish which remains static during timber frame settlement
12.0
50.0

115.0 (115mm mainframe)


Rev Date By Description

Title:

Rationel AURA
19 x 19mm treated s/w batten TYPICAL JAMB DETAIL
by others as stop end for rendered blockwork/timber frame
render - to be installed PRIOR
TO INSTALLATION OF Scale: 1:2 approx @ A4 Drawing no:
RATIONEL WINDOW
Date: January 2017
100.0

AURA.W1.03.B.J.001
Drawn: Studio62
Status: approved Revision:
blockwork to be rendered by R

others *window setback dimension to be adjusted


to ensure that required Tremco Illbruck tape
*60.0

width does not encroach over timber frame


Rationel Windows (UK) Ltd.
overall frame structure - refer to manufacturers literature 7 Avonbury Business Park, Howes Lane,
for tape size in relation to storey settlement Bicester, Oxfordshire. OX26 2UA
20.0

structural opening
tel: 01869 248181
fax: 01869 249693
web: www.rationel.co.uk
aluminium cill
25.0

11.0 nominal © Rationel Windows (UK) Ltd. This drawing must not be copied,
(tolerance:-2/+3) reproduced or published in whole or in part for commercial gain
without prior written permission of Rationel Windows (UK) Ltd.
IMPORTANT NOTE: When installing Rationel windows and
optional ARBOSIL 1090 silicone to seal cill fixing accessories, please ensure compliance with national
building regulations and British/European standards where
Tremco-Illbruck TP600 compressible seal (20/8-15mm necessary. This drawing is for guidance only and the
nominal or sized to suit finished joint) by installer customer must be satisfied that the principles outlined in
this drawing are effectively transposed to suit specific
60.0 115.0 (115mm mainframe) project requirements and site conditions.
Tremco Illbruck FM230 PU expanding foam by installer
m
die
A
w
lre
m
sn
otln
sa
h
ie
sre
ih
row
D
nsn
o
e
.ca
o
.lt
175mm x 3mm galvanised mild steel restraint bracket NOTES:
with 2 x No.10x40mm w/screws into frame and fixed
into steel frame structure with shimming as required - 1. Exetn rw aleahte so eb
rtha ete lTirem bu lrco
lkI-
all by installer so
nejita
gtp
ln
se
zh iefze
o
sd
n
e
tio
d
u
jtri
refer to drg. no. R.BES.RBG.001 for restraint bracket ARBOSL1 I0 co 9
in 0
lse iseanldpo ye
lhtelne
design guidance bacn kigo rd.
2. F nxigsandba rcnko
eyib
stn
eclitsa
ldrtl
frame extension by others fitted by installer accod rancew hR tion aigsa
lteu
dliance.
3. F nxigo rundsmubse tao b
e
wthlto
saitla
nda lsl
a
rtnsm eotrdtfm ianh dtorughteRoainste yse
ltm.
structural opening

internal finish, air seal and vapour control layer by


overall frame

others

optional Tremco-Illbruck ME500 internal flexible


membrane by installer where/if required for air sealing primary weather line
primary air barrier line

Rev Date By Description


31.0 nominal
(tolerance:-2/+3)

Title:

Rationel AURA
TYPICAL CILL DETAIL
rendered blockwork/steel frame system

cavity closer leg must not impede Scale: 1:2 approx @ A4 Drawing no:
19 x 19mm treated s/w batten sealing grounds
by others as stop end for Date: January 2017
render - to be installed PRIOR local 50 x 3mm GMS bearing plate AURA.W1.03.C.C.001
TO INSTALLATION OF Drawn: Studio62
by installer bedded on silicone
RATIONEL WINDOW Status: approved Revision:
95mm aluminium cill by others screwed
R
and sealed on silicone at interface with
blockwork to be rendered by frame extension by installer
others refer to drg. no. AURA.W1.M.CPG.001 steel frame system
for cill pressing design guidance Rationel Windows (UK) Ltd.
7 Avonbury Business Park, Howes Lane,
Bicester, Oxfordshire. OX26 2UA
25.0 20.0 100.0 100.0 12.0 104.0 including track
tel: 01869 248181
fax: 01869 249693
web: www.rationel.co.uk
NOTE: cavity wall insulation omitted for clarity
© Rationel Windows (UK) Ltd. This drawing must not be copied,
reproduced or published in whole or in part for commercial gain
without prior written permission of Rationel Windows (UK) Ltd.
IMPORTANT NOTE: When installing Rationel windows and
accessories, please ensure compliance with national
building regulations and British/European standards where
necessary. This drawing is for guidance only and the
customer must be satisfied that the principles outlined in
NOTE: cavity wall insulation omitted for clarity this drawing are effectively transposed to suit specific
project requirements and site conditions.
20.0 100.0 100.0 12.0 104.0 including track
m
die
A
w
lre
m
sn
otln
sa
h
ie
sre
ih
row
D
nsn
o
e
.ca
o
.lt
NOTES:
1. Exetn rw aleahte so eb
rtha ete lTirem bu lrco
lkI-
steel frame system so
nejita
gtp
ln
se
zh iefze
o
sd
n
e
tio
d
u
jtri
ARBOSL1 I0 co 9
in 0
lse iseanldpo ye
lhtelne
bacn kigo rd.
2. F nxigsandba rcnko
eyib
stn
eclitsa
ldrtl
blockwork to be rendered by cavity closer leg must not accod rancew hR tion aigsa
lteu
dliance.
others impede sealing grounds 3. F nxigo rundsmubse tao b
e
wthlto
saitla
nda lsl
a
rtnsm eotrdtfm ianh dtorughteRoainste yse
ltm.

primary weather line


11.0 nominal
(tolerance:-2/+3)

primary air barrier line

Rev Date By Description

Title:
optional Tremco-Illbruck ME500 internal flexible
structural opening

membrane by installer where/if required for air sealing Rationel AURA


overall frame

internal finish, air seal and vapour control layer by


TYPICAL HEAD DETAIL
rendered blockwork/steel frame system
others

175mm x 3mm galvanised mild steel restraint bracket Scale: 1:2 approx @ A4 Drawing no:

with 2 x No.10x30mm w/screws into frame and fixed Date: January 2017
into steel frame structure with shimming as required - AURA.W1.03.C.H.001
all by installer Drawn: Studio62
refer to drg. no. R.BES.RBG.001 for restraint bracket Status: approved Revision:
design guidance R

Tremco Illbruck FM230 PU expanding foam by installer

Tremco-Illbruck TP600 compressible seal (25/10-18mm Rationel Windows (UK) Ltd.


60.0 115.0 (115mm mainframe) 7 Avonbury Business Park, Howes Lane,
nominal or sized to suit finished joint) by installer Bicester, Oxfordshire. OX26 2UA
tel: 01869 248181
fax: 01869 249693
web: www.rationel.co.uk
© Rationel Windows (UK) Ltd. This drawing must not be copied,
reproduced or published in whole or in part for commercial gain
without prior written permission of Rationel Windows (UK) Ltd.
IMPORTANT NOTE: When installing Rationel windows and
accessories, please ensure compliance with national
building regulations and British/European standards where
necessary. This drawing is for guidance only and the
customer must be satisfied that the principles outlined in
this drawing are effectively transposed to suit specific
project requirements and site conditions.
104.0 including track optional Tremco-Illbruck ME500 internal flexible m
die
A
w
lre
m
sn
otln
sa
h
ie
sre
ih
row
D
nsn
o
e
.ca
o
.lt
membrane by installer where/if required for air sealing
NOTES:
internal finish, air seal and vapour control layer by 1. Exetn rw aleahte so eb
rtha ete lTirem bu lrco
lkI-
steel frame system others so
nejita
gtp
ln
se
zh iefze
o
sd
n
e
tio
d
u
jtri
ARBOSL1 I0 co 9
in 0
lse iseanldpo ye
lhtelne
175mm x 3mm galvanised mild steel restraint bracket bacn kigo rd.
with 2 x No.10x30mm w/screws into frame and fixed 2. F nxigsandba rcnko
eyib
stn
eclitsa
ldrtl
into steel frame structure with shimming as required - accod rancew hR tion aigsa
lteu
dliance.
all by installer 3. F nxigo rundsmubse tao b
e
wthlto
saitla
nda lsl
refer to drg. no. R.BES.RBG.001 for restraint bracket a
rtnsm eotrdtfm ianh dtorughteRoainste yse
ltm.
design guidance
12.0

cavity closer by others - leg must not impede sealing grounds

Tremco Illbruck FM230 PU expanding foam by installer primary weather line


primary air barrier line
Tremco-Illbruck TP600 compressible seal (25/10-18mm
nominal or sized to suit finished joint) by installer
100.0

115.0 (115mm mainframe)


Rev Date By Description

Title:

Rationel AURA
19 x 19mm treated s/w batten TYPICAL JAMB DETAIL
by others as stop end for rendered blockwork/steel frame system
render - to be installed PRIOR
TO INSTALLATION OF Scale: 1:2 approx @ A4 Drawing no:
RATIONEL WINDOW
January 2017
100.0

Date:
AURA.W1.03.C.J.001
Drawn: Studio62
Status: approved Revision:
blockwork to be rendered by R

others

60.0
Rationel Windows (UK) Ltd.
overall frame 7 Avonbury Business Park, Howes Lane,
Bicester, Oxfordshire. OX26 2UA
20.0

structural opening
tel: 01869 248181
fax: 01869 249693
web: www.rationel.co.uk
25.0

ARBOSIL 1090 silicone to 11.0 nominal © Rationel Windows (UK) Ltd. This drawing must not be copied,
seal between each end of cill (tolerance:-2/+3) aluminium cill reproduced or published in whole or in part for commercial gain
without prior written permission of Rationel Windows (UK) Ltd.
and structure by installer
IMPORTANT NOTE: When installing Rationel windows and
optional ARBOSIL 1090 silicone to seal cill fixing accessories, please ensure compliance with national
building regulations and British/European standards where
Tremco-Illbruck TP600 compressible seal (20/8-15mm necessary. This drawing is for guidance only and the
customer must be satisfied that the principles outlined in
nominal or sized to suit finished joint) by installer this drawing are effectively transposed to suit specific
project requirements and site conditions.
60.0 115.0 (115mm mainframe) Tremco Illbruck FM230 PU expanding foam by installer
m
die
A
w
lre
m
sn
otln
sa
h
ie
sre
ih
row
D
nsn
o
e
.ca
o
.lt
150mm x 3mm galvanised mild steel restraint bracket NOTES:
with 2 x No.10x40mm w/screws into frame and fixed 1. Exetn rw aleahte so eb
rtha ete lTirem bu lrco
lkI-
into structural insulated panel with shimming as required so
nejita
gtp
ln
se
zh iefze
o
sd
n
e
tio
d
u
jtri
- all by installer ARBOSL1 I0 co 9
in 0
lse iseanldpo ye
lhtelne
refer to drg. no. R.BES.RBG.001 for restraint bracket bacn kigo rd.
design guidance 2. F nxigsandba rcnko
eyib
stn
eclitsa
ldrtl
accod rancew hR tion aigsa
lteu
dliance.
frame extension by others fitted by installer 3. F nxigo rundsmubse tao b
e
wthlto
saitla
nda lsl
a
rtnsm eotrdtfm ianh dtorughteRoainste yse
ltm.
internal finish and air seal by others
structural opening

overall frame

Tremco-Illbruck ME500 internal flexible membrane by


installer for air sealing
primary weather line
vapour control layer by others primary air barrier line

Rev Date By Description


31.0 nominal
(tolerance:-2/+3)

Title:

Rationel AURA
SIP system TYPICAL CILL DETAIL
rendered blockwork/structural insulated panel

Scale: 1:2 approx @ A4 Drawing no:

19 x 19mm treated s/w batten Date: January 2017


by others as stop end for loadbearing cavity batten to suit SIP system AURA.W1.03.D.C.001
render - to be installed PRIOR requirements by others Drawn: Studio62
TO INSTALLATION OF Status: approved Revision:
RATIONEL WINDOW 95mm aluminium cill by others screwed
R
and sealed on silicone at interface with
frame extension by installer
blockwork to be rendered by refer to drg. no. AURA.W1.M.CPG.001 for
others cill pressing design guidance Rationel Windows (UK) Ltd.
7 Avonbury Business Park, Howes Lane,
Bicester, Oxfordshire. OX26 2UA
tel: 01869 248181
25.0 20.0 100.0 50.0 150.0
fax: 01869 249693
web: www.rationel.co.uk
© Rationel Windows (UK) Ltd. This drawing must not be copied,
reproduced or published in whole or in part for commercial gain
without prior written permission of Rationel Windows (UK) Ltd.
IMPORTANT NOTE: When installing Rationel windows and
accessories, please ensure compliance with national
building regulations and British/European standards where
necessary. This drawing is for guidance only and the
customer must be satisfied that the principles outlined in
this drawing are effectively transposed to suit specific
project requirements and site conditions.
20.0 100.0 50.0 150.0
m
die
A
w
lre
m
sn
otln
sa
h
ie
sre
ih
row
D
nsn
o
e
.ca
o
.lt
NOTES:
1. Exetn rw aleahte so eb
rtha ete lTirem bu lrco
lkI-
so
nejita
gtp
ln
se
zh iefze
o
sd
n
e
tio
d
u
jtri
ARBOSL1 I0 co 9
in 0
lse iseanldpo ye
lhtelne
bacn kigo rd.
2. F nxigsandba rcnko
eyib
stn
eclitsa
ldrtl
blockwork to be rendered by accod rancew hR tion aigsa
lteu
dliance.
others 3. F nxigo rundsmubse tao b
e
wthlto
saitla
nda lsl
cavity batten to suit SIP system
requirements by others a
rtnsm eotrdtfm ianh dtorughteRoainste yse
ltm.

primary weather line


11.0 nominal
(tolerance:-2/+3)

primary air barrier line


SIP system

Rev Date By Description


vapour control layer by others
Title:
structural opening

Tremco-Illbruck ME500 internal flexible membrane by Rationel AURA


overall frame

installer for air sealing


TYPICAL HEAD DETAIL
internal finish and air seal by others rendered blockwork/structural insulated panel

150mm x 3mm galvanised mild steel restraint bracket Scale: 1:2 approx @ A4 Drawing no:
with 2 x No.10x30mm w/screws into frame and fixed
Date: January 2017
into structural insulated panel with shimming as required AURA.W1.03.D.H.001
- all by installer Drawn: Studio62
refer to drg. no. R.BES.RBG.001 for restraint bracket
Status: approved Revision:
design guidance
R

Tremco Illbruck FM230 PU expanding foam by installer

Tremco-Illbruck TP600 compressible seal (25/10-18mm Rationel Windows (UK) Ltd.


60.0 115.0 (115mm mainframe)
nominal or sized to suit finished joint) by installer 7 Avonbury Business Park, Howes Lane,
Bicester, Oxfordshire. OX26 2UA
tel: 01869 248181
fax: 01869 249693
web: www.rationel.co.uk
© Rationel Windows (UK) Ltd. This drawing must not be copied,
reproduced or published in whole or in part for commercial gain
without prior written permission of Rationel Windows (UK) Ltd.
IMPORTANT NOTE: When installing Rationel windows and
accessories, please ensure compliance with national
building regulations and British/European standards where
necessary. This drawing is for guidance only and the
customer must be satisfied that the principles outlined in
vapour control layer by others this drawing are effectively transposed to suit specific
project requirements and site conditions.
Tremco-Illbruck ME500 internal flexible membrane by m
die
A
w
lre
m
sn
otln
sa
h
ie
sre
ih
row
D
nsn
o
e
.ca
o
.lt
installer for air sealing
NOTES:
SIP system
internal finish and air seal by others 1. Exetn rw aleahte so eb
rtha ete lTirem bu lrco
lkI-
so
nejita
gtp
ln
se
zh iefze
o
sd
n
e
tio
d
u
jtri
150mm x 3mm galvanised mild steel restraint bracket ARBOSL1 I0 co 9
in 0
lse iseanldpo ye
lhtelne
with 2 x No.10x30mm w/screws into frame and fixed bacn kigo rd.
into structural insulated panel with shimming as required 2. F nxigsandba rcnko
eyib
stn
eclitsa
ldrtl
- all by installer accod rancew hR tion aigsa
lteu
dliance.
150.0

refer to drg. no. R.BES.RBG.001 for restraint bracket 3. F nxigo rundsmubse tao b
e
wthlto
saitla
nda lsl
design guidance a
rtnsm eotrdtfm ianh dtorughteRoainste yse
ltm.

cavity batten to suit SIP system requirements by others

Tremco Illbruck FM230 PU expanding foam by installer primary weather line

Tremco-Illbruck TP600 compressible seal (25/10-18mm primary air barrier line


nominal or sized to suit finished joint) by installer
50.0

115.0 (115mm mainframe)


Rev Date By Description

Title:

Rationel AURA
19 x 19mm treated s/w batten TYPICAL JAMB DETAIL
by others as stop end for
rendered blockwork/structural insulated panel
render - to be installed PRIOR
TO INSTALLATION OF
Scale: 1:2 approx @ A4 Drawing no:
RATIONEL WINDOW
100.0

Date: January 2017


AURA.W1.03.D.J.001
Drawn: Studio62
Status: approved Revision:
blockwork to be rendered by
others R

60.0
Rationel Windows (UK) Ltd.
overall frame 7 Avonbury Business Park, Howes Lane,
20.0

Bicester, Oxfordshire. OX26 2UA


structural opening
tel: 01869 248181
fax: 01869 249693
web: www.rationel.co.uk
25.0

ARBOSIL 1090 silicone to


aluminium cill © Rationel Windows (UK) Ltd. This drawing must not be copied,
seal between each end of cill 11.0 nominal reproduced or published in whole or in part for commercial gain
and structure by installer (tolerance:-2/+3) without prior written permission of Rationel Windows (UK) Ltd.
IMPORTANT NOTE: When installing Rationel windows and
optional ARBOSIL 1090 silicone to seal cill fixing accessories, please ensure compliance with national
building regulations and British/European standards where
Tremco-Illbruck TP600 compressible seal (20/8-15mm necessary. This drawing is for guidance only and the
nominal or sized to suit finished joint) by installer customer must be satisfied that the principles outlined in
this drawing are effectively transposed to suit specific
40.0 115.0 (115mm mainframe) project requirements and site conditions.
Tremco Illbruck FM230 PU expanding foam by installer
m
die
A
w
lre
m
sn
otln
sa
h
ie
sre
ih
row
D
nsn
o
e
.ca
o
.lt
125mm x 3mm galvanised mild steel restraint bracket NOTES:
with 2 x No.10x40mm w/screws into frame and plugged
and screwed into structure with shimming as required - 1. Exetn rw aleahte so eb
rtha ete lTirem bu lrco
lkI-
all by installer so
nejita
gtp
ln
se
zh iefze
o
sd
n
e
tio
d
u
jtri
refer to drg. no. R.BES.RBG.001 for restraint bracket ARBOSL1 I0 co 9
in 0
lse iseanldpo ye
lhtelne
design guidance bacn kigo rd.
2. F nxigsandba rcnko
eyib
stn
eclitsa
ldrtl
frame extension by others fitted by installer accod rancew hR tion aigsa
lteu
dliance.
3. F nxigo rundsmubse tao b
e
wthlto
saitla
nda lsl
a
rtnsm eotrdtfm ianh dtorughteRoainste yse
ltm.
structural opening

internal finish, air seal and vapour control layer by


overall frame

others

optional Tremco-Illbruck ME500 internal flexible


membrane by installer where/if required for air sealing primary weather line
primary air barrier line

Rev Date By Description


31.0 nominal
(tolerance:-2/+3)

Title:
75 x 50mm counterbatten blockwork
by others Rationel AURA
TYPICAL CILL DETAIL
timber/block masonry

Scale: 1:2 approx @ A4 Drawing no:

75mm aluminium cill by others screwed and sealed on silicone at Date: January 2017
interface with frame extension by installer AURA.W1.04.A.C.001
refer to drg. no. AURA.W1.M.CPG.001 for cill pressing design guidance Drawn: Studio62
Status: approved Revision:
timber facade construction by
others to be completed PRIOR R

TO INSTALLATION OF
RATIONEL WINDOW
Rationel Windows (UK) Ltd.
7 Avonbury Business Park, Howes Lane,
Bicester, Oxfordshire. OX26 2UA
25.0 95.0 190.0
tel: 01869 248181
fax: 01869 249693
web: www.rationel.co.uk
© Rationel Windows (UK) Ltd. This drawing must not be copied,
reproduced or published in whole or in part for commercial gain
without prior written permission of Rationel Windows (UK) Ltd.
IMPORTANT NOTE: When installing Rationel windows and
accessories, please ensure compliance with national
building regulations and British/European standards where
necessary. This drawing is for guidance only and the
customer must be satisfied that the principles outlined in
this drawing are effectively transposed to suit specific
project requirements and site conditions.
95.0 190.0
m
die
A
w
lre
m
sn
otln
sa
h
ie
sre
ih
row
D
nsn
o
e
.ca
o
.lt
90.0 10.0 90.0 NOTES:
1. Exetn rw aleahte so eb
rtha ete lTirem bu lrco
lkI-
so
nejita
gtp
ln
se
zh iefze
o
sd
n
e
tio
d
u
jtri
timber facade construction by blockwork ARBOSL1 I0 co 9
in 0
lse iseanldpo ye
lhtelne
others to be completed PRIOR bacn kigo rd.
TO INSTALLATION OF 2. F nxigsandba rcnko
eyib
stn
eclitsa
ldrtl
RATIONEL WINDOW accod rancew hR tion aigsa
lteu
dliance.
3. F nxigo rundsmubse tao b
e
wthlto
saitla
nda lsl
a
rtnsm eotrdtfm ianh dtorughteRoainste yse
ltm.

primary weather line


11.0 nominal
(tolerance:-2/+3)

primary air barrier line


50 x 50mm counterbatten by
others

Rev Date By Description

Title:
optional Tremco-Illbruck ME500 internal flexible
structural opening

membrane by installer where/if required for air sealing Rationel AURA


overall frame

internal finish, air seal and vapour control layer by


TYPICAL HEAD DETAIL
timber/block masonry
others

125mm x 3mm galvanised mild steel restraint bracket Scale: 1:2 approx @ A4 Drawing no:

with 2 x No.10x30mm w/screws into frame and fixed Date: January 2017
into lintel with shimming as required - all by installer AURA.W1.04.A.H.001
refer to drg. no. R.BES.RBG.001 for restraint bracket Drawn: Studio62
design guidance Status: approved Revision:

R
Tremco Illbruck FM230 PU expanding foam by installer

Tremco-Illbruck TP600 compressible seal (25/10-18mm


nominal or sized to suit finished joint) by installer Rationel Windows (UK) Ltd.
40.0 115.0 (115mm mainframe) 7 Avonbury Business Park, Howes Lane,
Bicester, Oxfordshire. OX26 2UA
tel: 01869 248181
fax: 01869 249693
web: www.rationel.co.uk
© Rationel Windows (UK) Ltd. This drawing must not be copied,
reproduced or published in whole or in part for commercial gain
without prior written permission of Rationel Windows (UK) Ltd.
IMPORTANT NOTE: When installing Rationel windows and
accessories, please ensure compliance with national
building regulations and British/European standards where
necessary. This drawing is for guidance only and the
customer must be satisfied that the principles outlined in
optional Tremco-Illbruck ME500 internal flexible this drawing are effectively transposed to suit specific
membrane by installer where/if required for air sealing project requirements and site conditions.

m
die
A
w
lre
m
sn
otln
sa
h
ie
sre
ih
row
D
nsn
o
e
.ca
o
.lt
internal finish, air seal and vapour control layer by NOTES:
others
1. Exetn rw aleahte so eb
rtha ete lTirem bu lrco
lkI-
125mm x 3mm galvanised mild steel restraint bracket so
nejita
gtp
ln
se
zh iefze
o
sd
n
e
tio
d
u
jtri
blockwork with 2 x No.10x30mm w/screws into frame and plugged ARBOSL1 I0 co 9
in 0
lse iseanldpo ye
lhtelne
and screwed into structure with shimming as required - bacn kigo rd.
all by installer 2. F nxigsandba rcnko
eyib
stn
eclitsa
ldrtl
refer to drg. no. R.BES.RBG.001 for restraint bracket accod rancew hR tion aigsa
lteu
dliance.
design guidance 3. F nxigo rundsmubse tao b
e
wthlto
saitla
nda lsl
a
rtnsm eotrdtfm ianh dtorughteRoainste yse
ltm.
Tremco Illbruck FM230 PU expanding foam by installer
190.0

50 x 50mm counterbatten by others


primary weather line
Tremco-Illbruck TP600 compressible seal (25/10-18mm
primary air barrier line
nominal or sized to suit finished joint) by installer

timber facade construction by

115.0 (115mm mainframe)


others to be completed PRIOR
TO INSTALLATION OF
RATIONEL WINDOW
Rev Date By Description

Title:

Rationel AURA
TYPICAL JAMB DETAIL
timber/block masonry

Scale: 1:2 approx @ A4 Drawing no:


95.0

Date: January 2017


AURA.W1.04.A.J.001
Drawn: Studio62
approved

40.0
Status: Revision:

structural opening R

ARBOSIL 1090 silicone to seal between Rationel Windows (UK) Ltd.


25.0 7 Avonbury Business Park, Howes Lane,
each end of cill and structure by installer Bicester, Oxfordshire. OX26 2UA
aluminium cill
11.0 nominal tel: 01869 248181
fax: 01869 249693
(tolerance:-2/+3) overall frame web: www.rationel.co.uk
© Rationel Windows (UK) Ltd. This drawing must not be copied,
reproduced or published in whole or in part for commercial gain
without prior written permission of Rationel Windows (UK) Ltd.
IMPORTANT NOTE: When installing Rationel windows and
40.0 115.0 (115mm mainframe) optional ARBOSIL 1090 silicone to seal cill fixing accessories, please ensure compliance with national
building regulations and British/European standards where
Tremco-Illbruck TP600 compressible seal (20/8-15mm necessary. This drawing is for guidance only and the
nominal or sized to suit finished joint) by installer customer must be satisfied that the principles outlined in
this drawing are effectively transposed to suit specific
project requirements and site conditions.
Tremco Illbruck FM230 PU expanding foam by installer
m
die
A
w
lre
m
sn
otln
sa
h
ie
sre
ih
row
D
nsn
o
e
.ca
o
.lt
125mm x 3mm galvanised mild steel restraint bracket with NOTES:
2 x No.10x40mm w/screws into frame and fixed into timber
1. Exetn rw aleahte so eb
rtha ete lTirem bu lrco
lkI-
frame structure with shimming as required - all by installer
so
nejita
gtp
ln
se
zh iefze
o
sd
n
e
tio
d
u
jtri
refer to drg. no. R.BES.RBG.001 for restraint bracket
overall frame

design guidance ARBOSL1 I0 co 9


in 0
lse iseanldpo ye
lhtelne
bacn kigo rd.
structural opening

frame extension by others fitted by installer 2. F nxigsandba rcnko


eyib
stn
eclitsa
ldrtl
accod rancew hR tion aigsa
lteu
dliance.
internal finish and air seal by others 3. F nxigo rundsmubse tao b
e
wthlto
saitla
nda lsl
a
rtnsm eotrdtfm ianh dtorughteRoainste yse
ltm.
Tremco-Illbruck ME500 internal flexible membrane by
installer for air sealing

primary weather line


primary air barrier line

vapour control
(tolerance:-2/+3)
31.0 nominal

layer by others

75 x 50mm counterbatten
Rev Date By Description
by others
Timber Frame Title:

Rationel AURA
75mm aluminium cill by others screwed and sealed on TYPICAL CILL DETAIL
silicone at interface with frame extension by installer timber/timber frame
refer to drg. no. AURA.W1.M.CPG.001 for cill
pressing design guidance Scale: 1:2 approx @ A4 Drawing no:

timber facade construction by others to be completed Date: January 2017


PRIOR TO INSTALLATION OF RATIONEL WINDOW AURA.W1.04.B.C.001
Drawn: Studio62

25.0 95.0 12.0 140.0 Status: approved Revision:

NOTE: timber frame insulation omitted for clarity

PLEASE NOTE: Rationel Windows (UK) Ltd.


this detail assumes there is no differential movement between the 7 Avonbury Business Park, Howes Lane,
Bicester, Oxfordshire. OX26 2UA
external building finish and the structural timber frame
i.e. - external finish is fixed directly to timber frame and any required tel: 01869 248181
fax: 01869 249693
movement joints are outside of the window zone. web: www.rationel.co.uk
© Rationel Windows (UK) Ltd. This drawing must not be copied,
reproduced or published in whole or in part for commercial gain
without prior written permission of Rationel Windows (UK) Ltd.
95.0 12.0 140.0 IMPORTANT NOTE: When installing Rationel windows and
accessories, please ensure compliance with national
building regulations and British/European standards where
necessary. This drawing is for guidance only and the
customer must be satisfied that the principles outlined in
this drawing are effectively transposed to suit specific
project requirements and site conditions.
timber facade construction by
others to be completed PRIOR m
die
A
w
lre
m
sn
otln
sa
h
ie
sre
ih
row
D
nsn
o
e
.ca
o
.lt
TO INSTALLATION OF NOTES:
RATIONEL WINDOW
1. Exetn rw aleahte so eb
rtha ete lTirem bu lrco
lkI-
so
nejita
gtp
ln
se
zh iefze
o
sd
n
e
tio
d
u
jtri
ARBOSL1 I0 co 9
in 0
lse iseanldpo ye
lhtelne
bacn kigo rd.
2. F nxigsandba rcnko
eyib
stn
eclitsa
ldrtl
accod rancew hR tion aigsa
lteu
dliance.
3. F nxigo rundsmubse tao b
e
wthlto
saitla
nda lsl
11.0 nominal
(tolerance:-2/+3)

a
rtnsm eotrdtfm ianh dtorughteRoainste yse
ltm.
50 x 50mm counterbatten
by others
Timber Frame primary weather line
primary air barrier line

vapour control layer by others

Tremco-Illbruck ME500 internal flexible membrane by


structural opening

installer where/if required for air sealing

internal finish and air seal by others Rev Date By Description

125mm x 3mm galvanised mild steel restraint bracket with


overall frame

Title:
2 x No.10x30mm w/screws into frame and fixed into timber
Rationel AURA
frame structure with shimming as required - all by installer
refer to drg. no. R.BES.RBG.001 for restraint bracket TYPICAL HEAD DETAIL
design guidance timber/timber frame

Tremco Illbruck FM230 PU expanding foam by installer Scale: 1:2 approx @ A4 Drawing no:

Tremco-Illbruck TP600 compressible seal (25/10-18mm Date: January 2017


nominal or sized to suit finished joint) by installer AURA.W1.04.B.H.001
Drawn: Studio62
40.0 115.0 (115mm mainframe) Status: approved Revision:

PLEASE NOTE: Rationel Windows (UK) Ltd.


this detail assumes there is no differential movement between the 7 Avonbury Business Park, Howes Lane,
Bicester, Oxfordshire. OX26 2UA
external building finish and the structural timber frame
i.e. - external finish is fixed directly to timber frame and any required tel: 01869 248181
fax: 01869 249693
movement joints are outside of the window zone. web: www.rationel.co.uk
© Rationel Windows (UK) Ltd. This drawing must not be copied,
reproduced or published in whole or in part for commercial gain
without prior written permission of Rationel Windows (UK) Ltd.
IMPORTANT NOTE: When installing Rationel windows and
timber facade construction by accessories, please ensure compliance with national
building regulations and British/European standards where
others to be completed PRIOR
vapour control layer by others necessary. This drawing is for guidance only and the
TO INSTALLATION OF customer must be satisfied that the principles outlined in
RATIONEL WINDOW this drawing are effectively transposed to suit specific
Tremco-Illbruck ME500 internal flexible membrane by project requirements and site conditions.
installer for air sealing m
die
A
w
lre
m
sn
otln
sa
h
ie
sre
ih
row
D
nsn
o
e
.ca
o
.lt
NOTES:
internal finish and air seal by others
1. Exetn rw aleahte so eb
rtha ete lTirem bu lrco
lkI-
125mm x 3mm galvanised mild steel restraint bracket with so
nejita
gtp
ln
se
zh iefze
o
sd
n
e
tio
d
u
jtri
2 x No.10x30mm w/screws into frame and fixed into timber ARBOSL1 I0 co 9
in 0
lse iseanldpo ye
lhtelne
frame structure with shimming as required - all by installer bacn kigo rd.
Timber Frame
refer to drg. no. R.BES.RBG.001 for restraint bracket 2. F nxigsandba rcnko
eyib
stn
eclitsa
ldrtl
design guidance accod rancew hR tion aigsa
lteu
dliance.
3. F nxigo rundsmubse tao b
e
wthlto
saitla
nda lsl
Tremco Illbruck FM230 PU expanding foam by installer a
rtnsm eotrdtfm ianh dtorughteRoainste yse
ltm.
50 x 50mm counterbatten by others

Tremco-Illbruck TP600 compressible seal (25/10-18mm


primary weather line
140.0

nominal or sized to suit finished joint) by installer


primary air barrier line

115.0 (115mm mainframe)


12.0

Rev Date By Description

Title:

Rationel AURA
TYPICAL JAMB DETAIL
timber/timber frame

Scale: 1:2 approx @ A4 Drawing no:


95.0

Date: January 2017


AURA.W1.04.B.J.001
Drawn: Studio62
PLEASE NOTE: approved
40.0
Status: Revision:
this detail assumes there is no differential R
structural opening movement between the external building
finish and the structural timber frame
i.e. - external finish is fixed directly to
ARBOSIL 1090 silicone to seal between Rationel Windows (UK) Ltd.
25.0

timber frame and any required movement 7 Avonbury Business Park, Howes Lane,
each end of cill and structure by installer joints are outside of the window zone. Bicester, Oxfordshire. OX26 2UA
aluminium cill
11.0 nominal tel: 01869 248181
(tolerance:-2/+3) overall frame fax: 01869 249693
web: www.rationel.co.uk
© Rationel Windows (UK) Ltd. This drawing must not be copied,
reproduced or published in whole or in part for commercial gain
without prior written permission of Rationel Windows (UK) Ltd.
IMPORTANT NOTE: When installing Rationel windows and
accessories, please ensure compliance with national
optional ARBOSIL 1090 silicone to seal cill fixing building regulations and British/European standards where
necessary. This drawing is for guidance only and the
Tremco-Illbruck TP600 compressible seal (20/8-15mm customer must be satisfied that the principles outlined in
this drawing are effectively transposed to suit specific
nominal or sized to suit finished joint) by installer project requirements and site conditions.
40.0 115.0 (115mm mainframe)
Tremco Illbruck FM230 PU expanding foam by installer m
die
A
w
lre
m
sn
otln
sa
h
ie
sre
ih
row
D
nsn
o
e
.ca
o
.lt
NOTES:
125mm x 3mm galvanised mild steel restraint bracket
1. Exetn rw aleahte so eb
rtha ete lTirem bu lrco
lkI-
with 2 x No.10x40mm w/screws into frame and fixed
so
nejita
gtp
ln
se
zh iefze
o
sd
n
e
tio
d
u
jtri
into steel frame structure with shimming as required -
ARBOSL1 I0 co 9
in 0
lse iseanldpo ye
lhtelne
all by installer
bacn kigo rd.
refer to drg. no. R.BES.RBG.001 for restraint bracket
2. F nxigsandba rcnko
eyib
stn
eclitsa
ldrtl
design guidance
accod rancew hR tion aigsa
lteu
dliance.
frame extension by others fitted by installer 3. F nxigo rundsmubse tao b
e
wthlto
saitla
nda lsl
a
rtnsm eotrdtfm ianh dtorughteRoainste yse
ltm.
structural opening

internal finish, air seal and vapour control layer by


overall frame

others

optional Tremco-Illbruck ME500 internal flexible primary weather line


membrane by installer where/if required for air sealing primary air barrier line

Rev Date By Description


31.0 nominal
(tolerance:-2/+3)

Title:

75 x 50mm Rationel AURA


counterbatten by others steel frame system
TYPICAL CILL DETAIL
timber/steel frame system
75mm aluminium cill by others screwed and
sealed on silicone at interface with frame
Scale: 1:2 approx @ A4 Drawing no:
extension by installer
refer to drg. no. AURA.W1.M.CPG.001 for cill Date: January 2017
pressing design guidance AURA.W1.04.C.C.001
Drawn: Studio62
Status: approved Revision:
timber facade construction by others to be
R
completed PRIOR TO INSTALLATION OF
RATIONEL WINDOW

NOTE: steel frame insulation omitted for clarity Rationel Windows (UK) Ltd.
7 Avonbury Business Park, Howes Lane,
Bicester, Oxfordshire. OX26 2UA

154.0 (including track) tel: 01869 248181


25.0 95.0 12.0
fax: 01869 249693
web: www.rationel.co.uk
© Rationel Windows (UK) Ltd. This drawing must not be copied,
reproduced or published in whole or in part for commercial gain
without prior written permission of Rationel Windows (UK) Ltd.
IMPORTANT NOTE: When installing Rationel windows and
accessories, please ensure compliance with national
building regulations and British/European standards where
necessary. This drawing is for guidance only and the
customer must be satisfied that the principles outlined in
this drawing are effectively transposed to suit specific
project requirements and site conditions.
95.0 12.0 154.0 (including track)
m
die
A
w
lre
m
sn
otln
sa
h
ie
sre
ih
row
D
nsn
o
e
.ca
o
.lt
NOTES:
1. Exetn rw aleahte so eb
rtha ete lTirem bu lrco
lkI-
NOTE: steel frame insulation omitted for clarity so
nejita
gtp
ln
se
zh iefze
o
sd
n
e
tio
d
u
jtri
ARBOSL1 I0 co 9
in 0
lse iseanldpo ye
lhtelne
bacn kigo rd.
2. F nxigsandba rcnko
eyib
stn
eclitsa
ldrtl
accod rancew hR tion aigsa
lteu
dliance.
timber facade construction by 3. F nxigo rundsmubse tao b
e
wthlto
saitla
nda lsl
others to be completed PRIOR a
rtnsm eotrdtfm ianh dtorughteRoainste yse
ltm.
TO INSTALLATION OF
RATIONEL WINDOW

steel frame system


primary weather line
11.0 nominal
(tolerance:-2/+3)

primary air barrier line


50 x 50mm counterbatten
by others

Rev Date By Description

Title:
optional Tremco-Illbruck ME500 internal flexible
structural opening

membrane by installer where/if required for air sealing Rationel AURA


overall frame

internal finish, air seal and vapour control layer by


TYPICAL HEAD DETAIL
timber/steel frame system
others

125mm x 3mm galvanised mild steel restraint bracket Scale: 1:2 approx @ A4 Drawing no:

with 2 x No.10x30mm w/screws into frame and fixed Date: January 2017
into steel frame structure with shimming as required - AURA.W1.04.C.H.001
all by installer Drawn: Studio62
refer to drg. no. R.BES.RBG.001 for restraint bracket Status: approved Revision:
design guidance R

Tremco Illbruck FM230 PU expanding foam by installer

Tremco-Illbruck TP600 compressible seal (25/10-18mm Rationel Windows (UK) Ltd.


40.0 115.0 (115mm mainframe) 7 Avonbury Business Park, Howes Lane,
nominal or sized to suit finished joint) by installer Bicester, Oxfordshire. OX26 2UA
tel: 01869 248181
fax: 01869 249693
web: www.rationel.co.uk
© Rationel Windows (UK) Ltd. This drawing must not be copied,
reproduced or published in whole or in part for commercial gain
without prior written permission of Rationel Windows (UK) Ltd.
IMPORTANT NOTE: When installing Rationel windows and
timber facade construction by others to be accessories, please ensure compliance with national
completed PRIOR TO INSTALLATION building regulations and British/European standards where
necessary. This drawing is for guidance only and the
OF RATIONEL WINDOW optional Tremco-Illbruck ME500 internal flexible customer must be satisfied that the principles outlined in
membrane by installer where/if required for air sealing this drawing are effectively transposed to suit specific
project requirements and site conditions.
internal finish, air seal and vapour control layer by m
die
A
w
lre
m
sn
otln
sa
h
ie
sre
ih
row
D
nsn
o
e
.ca
o
.lt
others
NOTES:
125mm x 3mm galvanised mild steel restraint bracket 1. Exetn rw aleahte so eb
rtha ete lTirem bu lrco
lkI-
with 2 x No.10x30mm w/screws into frame and fixed so
nejita
gtp
ln
se
zh iefze
o
sd
n
e
tio
d
u
jtri
into steel frame structure with shimming as required - ARBOSL1 I0 co 9
in 0
lse iseanldpo ye
lhtelne
steel frame system
all by installer bacn kigo rd.
refer to drg. no. R.BES.RBG.001 for restraint bracket 2. F nxigsandba rcnko
eyib
stn
eclitsa
ldrtl
design guidance accod rancew hR tion aigsa
lteu
dliance.
154.0 (including track)

3. F nxigo rundsmubse tao b


e
wthlto
saitla
nda lsl
Tremco Illbruck FM230 PU expanding foam by installer a
rtnsm eotrdtfm ianh dtorughteRoainste yse
ltm.

50 x 50mm counterbatten by others

Tremco-Illbruck TP600 compressible seal (25/10-18mm primary weather line


nominal or sized to suit finished joint) by installer
primary air barrier line

115.0 (115mm mainframe)


12.0

Rev Date By Description

Title:

Rationel AURA
TYPICAL JAMB DETAIL
timber/steel frame system
95.0

Scale: 1:2 approx @ A4 Drawing no:

Date: January 2017


AURA.W1.04.C.J.001
Drawn: Studio62

40.0
Status: approved Revision:
structural opening
R

ARBOSIL 1090 silicone to seal between


25.0
each end of cill and structure by installer aluminium cill Rationel Windows (UK) Ltd.
7 Avonbury Business Park, Howes Lane,
11.0 nominal Bicester, Oxfordshire. OX26 2UA
(tolerance:-2/+3) overall frame
tel: 01869 248181
fax: 01869 249693
web: www.rationel.co.uk
© Rationel Windows (UK) Ltd. This drawing must not be copied,
reproduced or published in whole or in part for commercial gain
without prior written permission of Rationel Windows (UK) Ltd.
IMPORTANT NOTE: When installing Rationel windows and
accessories, please ensure compliance with national
building regulations and British/European standards where
optional ARBOSIL 1090 silicone to seal cill fixing necessary. This drawing is for guidance only and the
customer must be satisfied that the principles outlined in
Tremco-Illbruck TP600 compressible seal (20/8-15mm this drawing are effectively transposed to suit specific
project requirements and site conditions.
40.0 115.0 (115mm mainframe) nominal or sized to suit finished joint) by installer
m
die
A
w
lre
m
sn
otln
sa
h
ie
sre
ih
row
D
nsn
o
e
.ca
o
.lt
Tremco Illbruck FM230 PU expanding foam by installer NOTES:
125mm x 3mm galvanised mild steel restraint bracket 1. Exetn rw aleahte so eb
rtha ete lTirem bu lrco
lkI-
with 2 x No.10x40mm w/screws into frame and fixed so
nejita
gtp
ln
se
zh iefze
o
sd
n
e
tio
d
u
jtri
into structural insulated panel with shimming as required ARBOSL1 I0 co 9
in 0
lse iseanldpo ye
lhtelne
- all by installer bacn kigo rd.
refer to drg. no. R.BES.RBG.001 for restraint bracket 2. F nxigsandba rcnko
eyib
stn
eclitsa
ldrtl
design guidance accod rancew hR tion aigsa
lteu
dliance.
3. F nxigo rundsmubse tao b
e
wthlto
saitla
nda lsl
frame extension by others fitted by installer a
rtnsm eotrdtfm ianh dtorughteRoainste yse
ltm.
structural opening

overall frame

internal finish and air seal by others

Tremco-Illbruck ME500 internal flexible membrane by primary weather line


installer for air sealing
primary air barrier line
vapour control layer by others

Rev Date By Description


31.0 nominal
(tolerance:-2/+3)

Title:

75 x 50mm Rationel AURA


counterbatten by TYPICAL CILL DETAIL
others
timber/structural insulated panel
SIP system
Scale: 1:2 approx @ A4 Drawing no:

75mm aluminium cill by others screwed Date: January 2017


and sealed on silicone at interface with AURA.W1.04.D.C.001
frame extension by installer Drawn: Studio62
refer to drg. no. AURA.W1.M.CPG.001 Status: approved Revision:
for cill pressing design guidance R

timber facade construction by others to be


completed PRIOR TO INSTALLATION OF
RATIONEL WINDOW Rationel Windows (UK) Ltd.
7 Avonbury Business Park, Howes Lane,
Bicester, Oxfordshire. OX26 2UA
tel: 01869 248181
25.0 95.0 150.0
fax: 01869 249693
web: www.rationel.co.uk
© Rationel Windows (UK) Ltd. This drawing must not be copied,
reproduced or published in whole or in part for commercial gain
without prior written permission of Rationel Windows (UK) Ltd.
IMPORTANT NOTE: When installing Rationel windows and
accessories, please ensure compliance with national
building regulations and British/European standards where
necessary. This drawing is for guidance only and the
customer must be satisfied that the principles outlined in
this drawing are effectively transposed to suit specific
project requirements and site conditions.
95.0 150.0
m
die
A
w
lre
m
sn
otln
sa
h
ie
sre
ih
row
D
nsn
o
e
.ca
o
.lt
NOTES:
1. Exetn rw aleahte so eb
rtha ete lTirem bu lrco
lkI-
so
nejita
gtp
ln
se
zh iefze
o
sd
n
e
tio
d
u
jtri
timber facade construction by ARBOSL1 I0 co 9
in 0
lse iseanldpo ye
lhtelne
others to be completed PRIOR bacn kigo rd.
TO INSTALLATION OF 2. F nxigsandba rcnko
eyib
stn
eclitsa
ldrtl
RATIONEL WINDOW accod rancew hR tion aigsa
lteu
dliance.
3. F nxigo rundsmubse tao b
e
wthlto
saitla
nda lsl
a
rtnsm eotrdtfm ianh dtorughteRoainste yse
ltm.

primary weather line


11.0 nominal
(tolerance:-2/+3)

SIP system
50 x 50mm primary air barrier line
counterbatten
by others

Rev Date By Description


vapour control layer by others
Title:
structural opening

Tremco-Illbruck ME500 internal flexible membrane by Rationel AURA


overall frame

installer for air sealing


TYPICAL HEAD DETAIL
internal finish and air seal by others timber/structural insulated panel

125mm x 3mm galvanised mild steel restraint bracket Scale: 1:2 approx @ A4 Drawing no:
with 2 x No.10x30mm w/screws into frame and fixed
Date: January 2017
into structural insulated panel with shimming as required AURA.W1.04.D.H.001
- all by installer Drawn: Studio62
refer to drg. no. R.BES.RBG.001 for restraint bracket
Status: approved Revision:
design guidance
R

Tremco Illbruck FM230 PU expanding foam by installer

Tremco-Illbruck TP600 compressible seal (25/10-18mm Rationel Windows (UK) Ltd.


40.0 115.0 (115mm mainframe)
nominal or sized to suit finished joint) by installer 7 Avonbury Business Park, Howes Lane,
Bicester, Oxfordshire. OX26 2UA
tel: 01869 248181
fax: 01869 249693
web: www.rationel.co.uk
© Rationel Windows (UK) Ltd. This drawing must not be copied,
reproduced or published in whole or in part for commercial gain
without prior written permission of Rationel Windows (UK) Ltd.
IMPORTANT NOTE: When installing Rationel windows and
accessories, please ensure compliance with national
building regulations and British/European standards where
timber facade construction by others to be necessary. This drawing is for guidance only and the
vapour control layer by others
completed PRIOR TO INSTALLATION OF customer must be satisfied that the principles outlined in
RATIONEL WINDOW this drawing are effectively transposed to suit specific
Tremco-Illbruck ME500 internal flexible membrane by project requirements and site conditions.
installer for air sealing
m
die
A
w
lre
m
sn
otln
sa
h
ie
sre
ih
row
D
nsn
o
e
.ca
o
.lt
internal finish and air seal by others NOTES:
1. Exetn rw aleahte so eb
rtha ete lTirem bu lrco
lkI-
125mm x 3mm galvanised mild steel restraint bracket so
nejita
gtp
ln
se
zh iefze
o
sd
n
e
tio
d
u
jtri
with 2 x No.10x30mm w/screws into frame and fixed ARBOSL1 I0 co 9
in 0
lse iseanldpo ye
lhtelne
into structural insulated panel with shimming as required bacn kigo rd.
- all by installer 2. F nxigsandba rcnko
eyib
stn
eclitsa
ldrtl
refer to drg. no. R.BES.RBG.001 for restraint bracket accod rancew hR tion aigsa
lteu
dliance.
SIP system design guidance 3. F nxigo rundsmubse tao b
e
wthlto
saitla
nda lsl
a
rtnsm eotrdtfm ianh dtorughteRoainste yse
ltm.
Tremco Illbruck FM230 PU expanding foam by installer

50 x 50mm counterbatten by others


primary weather line
Tremco-Illbruck TP600 compressible seal (25/10-18mm
150.0

primary air barrier line


nominal or sized to suit finished joint) by installer

115.0 (115mm mainframe)


Rev Date By Description

Title:

Rationel AURA
TYPICAL JAMB DETAIL
timber/structural insulated panel

Scale: 1:2 approx @ A4 Drawing no:


95.0

Date: January 2017


AURA.W1.04.D.J.001
Drawn: Studio62
approved

40.0
Status: Revision:

R
structural opening

Rationel Windows (UK) Ltd.


ARBOSIL 1090 silicone to seal between 25.0 7 Avonbury Business Park, Howes Lane,
each end of cill and structure by installer aluminium cill Bicester, Oxfordshire. OX26 2UA
11.0 nominal tel: 01869 248181
(tolerance:-2/+3) overall frame fax: 01869 249693
web: www.rationel.co.uk
© Rationel Windows (UK) Ltd. This drawing must not be copied,
reproduced or published in whole or in part for commercial gain
without prior written permission of Rationel Windows (UK) Ltd.

You might also like