Micrometer Adjustable Torque Wrench
(10~80FT-LBS.)
(10~150FT-LBS.)
How To Use
ancing weenchin hand with graduations visible with he marked arrow Elementary Scale
‘up, hen untock knurled handle by turning lk nul counterclockwise,
5 Set amount o orquerequedby tuning Knulegnancieto reas exact amount cn cate
ations.
vel edge of the knurled handte is
withthe 0 ft Lbs graduation,
2 Tum knurled nandie clockwise until 6M. Lbs graduation on the Bevel edge othe handle
is inline with the vertical ine on the ease.
3 Lock handle securely by turning lock ut clockwiee, and now wrenchi set at $8 A.Lbs
which is ready touse. See Figure tend2
CC. Inetatthe proper sockot or attachmenttothe square driv
handle unt you fe
fornextoperstion.
‘00 NOT CONTINUE TO PULL AFTER WRENCH RELEASES. USE SPECIAL CARE ATLOW
TORQUE SETTINGS THAT WiLL PULL STOPS WHEN WRENCH CLICKS.
1nd apply te nut or bolt and pu
andlor hear wrench click. Release pull and wrench auiomalically resets
a FIG! SOFT-LB FIG2 S6FT-LB
‘CAUTION:
4. tfwrench has not been used or has been in slorage for sometime, operate it several times.
‘at ow torque setting which permits special internal lubricant to re-coat internal working parts
2. When wrench is notin use, keep doing adjustment allowest torque setting,
3. Donatturn handle below lowest torque setting
4 Do not continue puling on the wrench after pre-set torque has been reached ang the wrench
‘must be taken off he nandle anc the wrench allowed to automat
ply pressure aftarthe wrench has been released. wil
Sy
demoge
MEASURING INSTRUMENT.
‘CALIBRATION AND SERVICING MUST
BE DONE REGULARLY AND IS THE
OWNERS RESPONSIBILITY.