‘9123, 7:30 eM Prevent thin andlor faking... | Amertcan Galvanizers Association
aca) American
Galvanizers
mY Association
» KnowledgeBase » Prevent thin andjor flaking coatings from thermally cut edges
Prevent thin and/or flaking coatings from thermally cut edges
April 6, 2016
‘Authored by Alana Fossa
How to prevent thin and/or flaking coatings from thermally cut edges?
Steel typically arrives at the galvanizing plant directly from the
fabricator where a number of fabrication steps are performed,
including cutting. The cutting method is often selected based on
the material type, thickness, and dimensional tolerances required