Professional Documents
Culture Documents
Applications:
• Pump and Probe Studies
• Time-domain Spectroscopy
• Surface Sum Frequency Generation
• EUV and X-ray Generation
• Attosecond Pulse Generation
• Terahertz Generation and Studies
• Time-resolved Raman Spectroscopy
• Multiphoton Microscopy (MPE)
• SHG/CARS/SRS/STED Microscopy
• Non-linear Material Modification
• Quantum Control Experiments
Introduction
UF Product
Overview
Table of
Contents
Pump
Lasers
Oscillator
Accessories
Amplifiers
Welcome to the dynamic world of ultrafast lasers. day after day. When you select any of the products in
This catalog covers the most comprehensive range this catalog, you will be building a strong foundation Amplifier
of ultrafast products available anywhere – from for your scientific instrumentation, ready to be expand- Accessories
10 femtosecond oscillators to terawatt amplifiers, ed as your requirements evolve. The investments that
from pump lasers to autocorrelators. The unparalleled you make now will continue to deliver valuable results
Laser
range of products guarantees that you can always for many years to come and wherever your research Measurement
and Control
cho0se the best laser device to match your experi- takes you. Accessories
mental needs.
Finally, be assured that the exceptional performance Accessory
Our extensive and ever-growing portfolio enables you of our products is backed by a highly specialized global Compatibility
Charts
to start your work with a simple modelocked oscillator support organization. Wherever a Coherent ultrafast
and later on expand your fast moving research with product is deployed, our team of scientific field service
ultrafast amplifiers, parametric devices and sophisti- engineers will be there to support it. So, no matter Table
cated accessories. We understand that before making what type of research you are doing or where you are Layouts
any important buying decision you talk with other located, we provide you with the best performance,
ultrafast researchers. the broadest portfolio and the most comprehensive
technical support.
We are confident that every Coherent user will tell
you that our products are reliable, high-performance, This is how we fulfill our promise to deliver you -
user-friendly, and designed to deliver consistent results, Better Ultrafast, Every Day.
Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 1
Ultrafast Product Overview
Oscillators and Accessories
We offer an extensive portfolio of ultrafast oscillator patible with the Mira-900, but incompatible with
Introduction products to choose from. This diagram summarizes the Mira-HP. Please refer to the specifications on the
the range and also indicates the compatibility of individual product pages and the accessory compatibil-
the various available products. For example, the ity charts on page 73 for more details. If you still have
Synchrolock-AP accessory is compatible with the questions regarding specifications of product compat-
UF Product
Overview Mira and Vitara, but incompatible with the Vitesse ibility, please call or email us.
and Chameleon. Similarly, the Pulse Switch is com-
Table of
Contents Oscillators
Verdi Verdi
Pump 10W to 20W 5W to 12W
Lasers
Mira-HP Mira-900
Oscillators Vitara Vitesse Chameleon
Femto/Pico/Dual Femto/Pico/Dual
Synchrolock-AP Synchrolock-AP
Oscillator
Accessories
Amplifiers
Carrier-Envelope Phase
Pulse Switch
(CEP) Stabilizer
Amplifier
Accessories Pulse Picker Pulse Picker
Laser
Measurement Harmonics Generators Harmonics Generators
and Control
Accessories
Mira-OPO Mira-OPO
Accessory
Compatibility
Charts
Table
Layouts
Chameleon Compact
OPO-Vis
Our ultrafast amplifier portfolio is the most extensive Please refer to the specifications on the individual
available. We offer amplified pulse energies from 4 µJ product pages for more details. If you still have ques- Introduction
to 100 mJ and repetition-rates from 10 Hz to 300 kHz. tions regarding specifications or product compatibility,
The diagram below summarizes the range available please call or email us.
and also indicates the compatibility of the various
UF Product
products. Please note that not all oscillator versions Overview
are compatible with all versions of our amplifiers.
Table of
Oscillators Contents
One-Box Amplifier
Verdi Verdi
10W to 20W 5W to12W Libra 1, 5, or 10 kHz
Pump
Vitesse/ Lasers
Evolution
Vitara
Mira-HP Mira-900
Vitara Vitesse Chameleon Amplifier
Femto/Pico/Dual Femto/Pico/Dual
Oscillators
Oscillator
Accessories
Amplifiers
RegA
Single-Shot to 500 kHz Legend Elite HE+ Legend Elite Duo HE+ Legend Hidra
1, 5, and 10 kHz 1, 5, and 10 kHz Cryo PA 10 Hz Amplifiers
Verdi
Evolution Evolution Evolution 10 Hz Nd:YAG
Amplifier
Amplifier Amplifier Amplifier Amplifier Amplifier Accessories
Laser
Measurement
and Control
Accessories
Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 3
Ultrafast Laser Systems
Table of Contents
UF Product
Overview
Ultrafast Product Overview
Oscillators and Accessories 2
Amplifiers and Accessories 3
Table of
Contents
Pump Lasers
Pump Verdi G-Series 6-7
Lasers
Evolution 8-11
Oscillators Oscillators
Mira-900 12-15
Mira-HP 16-17
Oscillator
Accessories Vitara 18-19
Vitesse 20-21
Chameleon Ultra 22-23
Amplifiers
Chameleon Vision and Vision-S 24-27
Amplifier
Accessories Oscillator Accessories
Chameleon Compact OPO and OPO-Vis 28-31
Laser Mira-OPO 32-35
Measurement
and Control
Accessories
Harmonic Generation for Ultrafast Oscillators 36
Pulse Picker 37
Accessory Pulse Switch for Mira-900 38-39
Compatibility
Charts Compact Pulse Compressor (CPC-II) 41
Pulse Compressors (SPO-I/SPO-II) 41
Table Synchrolock-AP 42-43
Layouts
CEP Stabilizer for Vitara 44-45
Amplifiers
Legend Elite HE+/Legend Elite Duo HE+ 46-49
Legend Elite Cryo PA 50-51
Libra 52-53
Hidra 54-55
RegA 9000/9050 56-57
Amplifier Accessories
Introduction
OPerA Solo 58-59
TOPAS 60-61
TOPAS-Prime 62-63 UF Product
Overview
SHBC/TOPAS-400 64-65
Harmonic Generator Systems (HGS) 66
Single-Shot Autocorrelator (SSA) 67 Table of
Contents
OPA 9400/9450 and 9800/9850 68
DFG 9800/9850 69
Legend Elite CEP 70-71 Pump
Lasers
How to Contact Us 76
Amplifier
Accessories
Accessory
Compatibility
Charts
Table
Layouts
Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 5
Verdi G-Series
Low-Noise, Green Pump Lasers
Introduction
UF Product
Overview
Table of
Contents
Pump
Lasers
Oscillators
Oscillator
Accessories
The Verdi G-Series is a revolutionary green pump laser most noise-sensitive applications like CEP stabilization.
that uses a semiconductor chip as the active medium The absence of thermal lensing in the active medium
in place of a conventional laser crystal. This chip has a allows adjusting the output power between 250 mW
Amplifiers thickness of only a few microns and is pumped by a and the maximum value without changes in beam
diode laser, to generate an infrared beam at a wave- parameters. The inherently smaller and simpler design
length determined by the chip properties. In all the Verdi is coupled with the well-established advantages of
Amplifier G models, the oscillating wavelength is 1064 nm intra- the entire Verdi family – PermAlign technology and
Accessories
cavity doubled to produce a 532 nm green output beam. vertically integrated pump diode supply – to enable a
new laser platform that is easily scalable in power and
Laser
This so-called Optically-Pumped Semiconductor Laser extremely reliable.
Measurement (OPSL) technology, patented and unique to Coherent,
and Control
Accessories offers numerous benefits. The very short upper state OPSL technology has been proven for over 10 years
lifetime eliminates the well known “green noise” and in over 30,000 worldwide installations of various
Accessory
problem encountered with other multi-frequency models operating at many different wavelengths and
Compatibility solid-state lasers; this results in a noise performance power levels. Verdi G and other OPSL models are also
Charts
superior to all other green lasers and enabling the integrated in the Vitara ultrafast oscillator family.
0.030
Beam Diameter (mm)
0.020
0.75 M2 Divergence 2.5
(mrad)
0 0 1.0
0 2 4 6 8 10 0 5 10 15 20 25 30
Output Power (W) 532 nm Power (W)
units installed
• Absence of “green noise” enables <0.02%
rms noise performance • Easy set up and operation Table of
Contents
• 2-Year warranty and low cost of ownership
Pump
Lasers
Specifications1 Verdi G2/G5/G7/G8 G10 G12/G15/G18/G20
Wavelength (nm) 532 ±2
Pulse Format CW
Spectral Purity (%) >99 Oscillators
Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 7
Evolution
Q-Switched, Nd:YLF Green Pump Lasers
Introduction
UF Product
Overview
Table of
Contents
Pump
Lasers
Oscillators
Oscillator
Accessories
The Evolution family of frequency-doubled Nd:YLF Like our Verdi CW pump laser, the Evolution is the
diode-pumped lasers provides the mode quality, industry’s best-selling laser in its class and is used to
stability and range of power levels ideally suited pump more amplifiers than any other Q-switched
Amplifiers for pumping Ti:Sapphire ultrafast amplifiers with repe- pump laser in the world.
tition-rates in the range of 1 kHz to 10 kHz. Evolution
is available in four versions: 15W, 30W, 45W and 75W With pulse energies in excess of 45 mJ at 1 kHz, the
Amplifier of average power when rated at 5 kHz. Evolution-HE provides the optimum solution for
Accessories
pumping high power amplifiers, as well as the high
The lifetime of the Evolution’s pump diodes routinely pulse energy required in such emerging applications
Laser
exceeds 10,000 hours and the highly efficient pumping as semiconductor annealing, materials processing
Measurement lowers the thermal load on the Nd:YLF rod. These two and flow visualization.
and Control
Accessories elements are key to the Evolution’s reliability, power
stability, low noise and beam quality. Surprisingly
Accessory
compact, the Evolution laser head is built in a rugged,
Compatibility monolithic, thermally-stabilized enclosure for reliable,
Charts
alignment-free operation.
Table
The laptop computer supplied with the system
Layouts includes a comprehensive LabVIEW user interface
that provides a wide range of control, diagnostics
and performance-monitoring features.
LabVIEW GUI
• Optimized for pumping the Legend Elite series of ultrafast Ti:Sapphire amplifiers
• Available in four versions: 15W, 30W, 45W, and 75W (High Energy) UF Product
Overview
• Double Pulse Option available for the 15W and 30W versions
• 1 kHz to 10 kHz repetition-rates
Table of
Amplifiers
Amplifier
Accessories
Laser
Measurement
and Control
Accessories
25 50
Power at 527 nm (W)
Table
20 Mean Power = 25.02W 40 Mean Power = 50.09W Layouts
Std. Dev. = 0.3% Std. Dev. = 0.16%
Dev. (%)
Dev. (%)
15 2 30 1
0 0
10 2 20 1
0 12 24 0 12 24
5 Time (hours) 10 Time (hours)
0 0
0 4 8 12 16 20 24 0 4 8 12 16 20 24
Time (hours) Time (hours)
Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 9
Evolution
Q-Switched, Nd:YLF Green Pump Lasers
Accessory
Compatibility
Charts
Table
Layouts
Typical Evolution-30
Beam Profile
Introduction
UF Product
Overview
Table of
Contents
Pump
Lasers
50
Amplifiers
40
Power (W)
30 Amplifier
Accessories
20
Laser
10 Measurement
and Control
Accessories
0
0 2,000 4,000 6,000 8,000 10,000 12,000
Accessory
Table
Layouts
Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 11
Mira-900
Ultrafast Femtosecond/Picosecond Ti:Sapphire Oscillators
Introduction
UF Product
Overview
Table of
Contents
Pump
Lasers
Oscillators
Oscillator
Accessories
More Mira-900 oscillators are in use today than pulse width and power. Optima features a fast
any other modelocked Ti:Sapphire laser system. photodiode, relative power monitor, ß-lock, CW
The Mira-900 combines simplicity and reliability in detector, humidity sensor and an automatic starter.
Amplifiers an innovative design to produce the most powerful
and versatile ultrafast laser system available. A wide range of accessories is available for the
Mira-900. These allow operation at lower repetition-
Amplifier The innovative design of the Mira-900 system makes rate (Pulse Picker), higher pulse energy (Pulse Switch
Accessories
switching between continuous-wave, picosecond cavity dumper), shorter wavelengths (Harmonic
and femtosecond operation simple, while passive Generator, Mira-OPO-VIS), longer wavelengths
Laser
Kerr lens modelocking provides greater ease-of-use (Mira-OPO-IR), and the ability to deliver a transform-
Measurement and reliability. limited pulse at the sample (SPO-I, SPO-II, CPC-II).
and Control
Accessories
Our built-in Optima control and diagnostics system
Accessory
enables easy adjustment of the output wavelength,
Compatibility
Charts
1.2 1.2
0.8 0.8
0.4 0.4
0 0
700 750 800 850 900 950 1000 700 750 800 850 900 950 1000
Wavelength (nm) Wavelength (nm)
• Simple, stable Kerr lens modelocking for ease-of-use • Short pulse option: <70 fs
and reliability
• Long pulse option: >5 ps UF Product
• Femtosecond, picosecond and continuous-wave Overview
• Optima system provides advanced system monitoring • Pulse Switch cavity dumper Lasers
Specifications1 Mira Optima 900-F Mira Optima 900-P Mira Optima 900-D
Output Power2,3
Dual platform contains all Amplifier
Accessories
Verdi-G5 0.75 hardware necessary for both
Verdi-G8 1.0 femtosecond (-F) and
Verdi-G10 1.4 picosecond (-P) operation.
Verdi-G12 1.6 Laser
Measurement
Tuning Range4 (nm) 700 to 1000 and Control
Accessories
Pulse Width2,5 <115 fs <2 ps <115 fs and <2 ps
Repetition-Rate (MHz) 76, nominal
Noise6 (%) <0.1 Accessory
Compatibility
Stability7 (%) <3 Charts
Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 13
Mira-900
Internal Cavity Design
Introduction
UF Product
Overview
Pump
Lasers
Oscillators
Pump input B
Oscillator
Independent pump
Accessories beam translation
and angle controls
Amplifiers
Amplifier
Accessories
900-F fold mirror M6
Laser
Measurement
and Control
Accessories
Accessory
Compatibility
Charts
Ti:Sapphire
crystal mount
Introduction
UF Product
Overview
900-P Gires-Tournois
Interferometer (GTI) 900-P fold mirror M10 Cavity length thermal CW cavity end mirror M9 Table of
Contents
with b-Lock compensation mechanism
Pump
Lasers
Oscillators
CW detector
Amplifiers
Fast photodiode sync
output detector
Amplifier
Accessories
Laser
Measurement
and Control
Accessories
Detector block pick-off
Accessory
Compatibility
Charts
Starter mechanism
Cavity mirror M5 Fold mirror M3 Saturable absorber X, Y and length control of Table
aperture with width output coupler mirror M1 Layouts
Birefringent filter
tuning element and translation controls
Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 15
Mira-HP
High Power Ultrafast Ti:Sapphire Oscillators
Introduction
UF Product
Overview
Table of
Contents
Pump
Lasers
Oscillators
Oscillator
Accessories
The femtosecond/picosecond Mira-HP is the world’s Typical Mira-HP Beam Profile
most powerful commercial ultrafast Ti:Sapphire
oscillator. Conservatively specified at 3.5W average
Amplifiers power in femtosecond mode, the Mira-HP-F typically
delivers power in excess of 4W at 800 nm. Designed
specifically to be pumped by our Verdi G18 laser,
Amplifier Mira-HP oscillators deliver high power across the
Accessories
entire Ti:Sapphire tuning curve. Like the Mira 900,
the Mira-HP features the built-in Optima control
Laser
and diagnostics system for greater ease of use and
Measurement high reliability.
and Control
Accessories
Accessory
Compatibility
Charts
4
Output Power (W)
3
2
2
1
1
0 0
700 750 800 850 900 950 1000 700 750 800 850 900 950 1000
Wavelength (nm) Wavelength (nm)
Output Power2 (W) >3.5 (>4 typ.) >3.0 (>3.2 typ.) Dual platform contains all
hardware necessary for both
femtosecond (-F) and
picosecond (-P) operation. Amplifier
Accessories
Pulse Width2,3,4 <130 fs <2 ps <130 fs and <2 ps
Tuning Range (nm)(X-Wave Optics) 700 to 1000
Repetition-Rate (MHz)(nominal) 76 Laser
Measurement
Noise5 (%) <0.1 and Control
Stability6 (%) <3 Accessories
Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 17
Vitara
Automated, Hands-Free Ultrashort Pulse Ti:Sapphire Oscillator
Introduction
UF Product
Overview
Table of
Contents
Pump
Lasers
Oscillators
Oscillator
Accessories
Vitara is the new industry standard for hands-free, tailored for seeding ultrafast amplifiers. All models of
integrated, ultra-broadband, flexible ultrafast lasers. the Vitara platform provide hands-free operation guar-
Representing the culmination of 20 years of in-house anteed by Coherent’s proprietary clean manufacturing
Amplifiers expertise with Kerr Lens mode-locking and thousands practices, our unique Optically Pumped Semiconductor
of clean-room manufactured, industrial-grade ultrafast (OPS) pump lasers and a suite of automated controls.
lasers, the Vitara family satisfies the most sophisticated In addition to its exquisite flexibility, Vitara satisfies the
Amplifier requirements for amplifier seeding, terahertz genera- most sophisticated requirement in Carrier to Envelope
Accessories
tion, attosecond studies, quantum control experiments, Phase (CEP) stabilization and external source syn-
non-linear imaging and spectroscopy applications. chronization thanks to its broad range of accessories.
Laser
Models within the Vitara family range from an ultra- Designed as a long-lasting and expandable ultrafast
Measurement broadband version generating pulses shorter than laser platform, Vitara provides reliable hands-free
and Control
Accessories 10 fs, a tunable version with user-adjustable bandwidth operation even with the most demanding applications
and sub-12 fs compressed output, a high power version and environments.
Accessory
providing 1 Watt-class average power and a version
Compatibility
Charts
1000 0.8 2
Pulse Intensity
800 0.7 1
Phase (rad)
0.6
600 0.5 0
9 fs Measured
0.4 Transform Limit
400 Pulse Duration 1
0.3 Measured Pulse
Vitara T 0.2 Phase
200 2
Vitara T HP 0.1
0 0 3
20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 30 25 20 15 10 5 0 5 10 15 20 25 30
Bandwidth FWHM (nm) Time (fs)
• Compact footprint
Oscillators
Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 19
Vitesse
Compact Turnkey Modelocked Ti:Sapphire Oscillators
Introduction
UF Product
Overview
Table of
Contents
Pump
Lasers
Oscillators
Oscillator
Accessories
The Vitesse family of one-box modelocked Ti:Sapphire is particularly suitable as a seed for ultrafast ampli-
oscillators features an integrated Verdi pump laser in a fiers, such as our Legend Elite systems and our RegA
truly hands-off sealed laser head design. Ideally suited 9000/9050 regenerative amplifier.
Amplifiers for seeding ultrafast amplifiers, or as the laser source
in a wide range of industrial applications, all Vitesse Vitesse Duo
versions use PermAlign solder-bonded optics for high This special Duo version serves as an integrated seed
Amplifier reliability and intracavity chirped optics for dispersion and green pump source for our RegA 9000/9050
Accessories
compensation. regenerative amplifier. In this configuration a 10W
Verdi CW laser internally pumps the Vitesse Ti:Sapphire
Laser
Vitesse 800 oscillator while externally pumping the RegA. The
Measurement This fixed-wavelength version operates at 800 nm combined two-box Vitesse Duo and RegA 9000/9050
and Control
Accessories and is available with Verdi 2W or Verdi 5W pump lasers. system is a compact, economical, all-solid-state
System control is via the front panel of the power solution for high repetition-rate, ultrafast amplifica-
Accessory
supply or from an external computer. The Vitesse 800 tion.
Compatibility
Charts
5.0
Green Power (W)
4.0
3.0
2.0
1.0
0
0 1 2 3 4 5 6 7 8 9 10 11 12
Months
Oscillator
Accessories
Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 21
Chameleon Ultra
Integrated, Automated and Widely Tunable Ti:Sapphire Oscillator
Introduction
UF Product
Overview
Table of
Contents
Pump
Lasers
Oscillators
Oscillator
Accessories
More Chameleon Ultra systems are used for For example, the Chameleon Ultra II’s 680 nm to
Multi-Photon Excitation (MPE) Microscopy and other 1080 nm tuning range allows peak excitation of
non-linear imaging techniques than any other laser. any marker – from short-wavelength dyes such as
Amplifiers Indo or Fura, to new proteins like mCherry – as well
Pumped by the highest power green laser available as optimum native fluorescence excitation or SHG
on the market, Chameleon Ultra II delivers the high- imaging. Every laser in the Chameleon Ultra family is
Amplifier est power, the widest tuning range, the fastest tun- compatible and has been tested with every inverted or
Accessories
ing speed and the lowest noise of all commercially upright MPE microscope on the market.
available Ti:Sapphire lasers. Its beam quality and pulse
Laser
duration are specified to perfectly match your micro- In addition to the industry record, the integrated 18W
Measurement scope or any other femtosecond experiment. Because Verdi pump laser provides the lowest optical noise and
and Control
Accessories of these capabilities, it is possible to image more dyes longest lifetimes available.
and fluorescent proteins, and to obtain deeper images
Accessory
more quickly than with any other laser.
Compatibility
Charts
Chameleon Ultra II Typical Power
4.5
Table
Layouts 4.0 Chameleon Ultra II
3.5
3.0
Power (W)
2.5
2.0
1.5
1.0
0.5
0
650 700 750 800 850 900 950 1000 1050 1100
Wavelength (nm)
Proprietary PowerTrack and PermAlign technologies A broad range of accessories, including units for pre-
ensure stable performance over the laser lifetime compensation, harmonics generation, and OPO wave-
without any adjustments. length extension, enable more advanced studies where Oscillator
Accessories
adjustable pulse duration and UV, visible or longer IR
The features of Chameleon Ultra combine to provide wavelengths are desirable.
high throughput and quiet, reliable operation for
thousands of hours, image after image. Amplifiers
Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 23
Chameleon Vision and Vision-S
Integrated, Automated and Widely Tunable Ti:Sapphire Oscillators
Introduction
UF Product
Overview
Table of
Contents
Pump
Lasers
Oscillators
Oscillator
Accessories
The Chameleon Vision family has been designed to Chameleon Vision-S has been designed for those
pre-compensate (pre-chirp) for the natural dispersion users who, in addition to pre-compensation, also
that occurs when femtosecond pulses pass through want to excite the sample with even shorter pulses,
Amplifiers optical elements such as lenses. but still retain the widest possible tuning range. Short
pulses maximize the ratio between peak power and
In some imaging applications, it may be useful to ex- average power, an advantage for those samples where
Amplifier cite the sample with short pulses in order to maximize linear (average power-based) damage dominates over
Accessories
the efficiency of the non-linear process (two-photon non-linear (peak power-based) damage. Chameleon
excitation or harmonic generation). To satisfy this need, Vision-S fully satisfies this requirement
Laser
Chameleon Vision I and Vision II use the same ultrafast by providing 75 fs pulses at the sample.
Measurement cavity design of the Chameleon Ultra family, with the
and Control
Accessories addition of a built-in automated, pre-compensation Built-in pre-compensation supplies also an easy way
unit. As a result, the pulse duration at the sample can to purposely change the pulse duration at the sample,
Accessory
always be optimized to match its time-bandwidth to study of the interplay of peak power, average power
Compatibility limited value (about 140 fs at 800 nm). and pulse duration on different samples. For example,
Charts
by mismatching the pre-compensation, it is possible
Table
Chameleon Vision Family Chameleon Vision Maximum
Layouts Typical Power Negative Dispersion Capability
The shaded area represents the available dispersion range
3.5 50,000
Negative Dispersion (fs2)
2.5
2.0 30,000
1.5 20,000
1.0
10,000
0.5
0 0
650 700 750 800 850 900 950 1000 1050 1100 650 700 750 800 850 900 950 1000 1050 1100
Wavelength (nm) Wavelength (nm)
• Simple menu-drive GUI or RS-232 operator interface for laser and pre-chirp management
• On board spectrometer with USB interface for wavelength and bandwidth monitoring Oscillators
All Chameleon Vision models incorporate our propri- linear imaging. This exceptional performance enables
etary prism-based design, able to compensate the Chameleon Vision to easily manage pulse duration and
broadest range of GVD (Group Velocity Dispersion) excitation wavelength, providing brighter images and Amplifier
using the smallest system footprint commercially better sample viability. Accessories
40,000
Peak Power (kW)
400
30,000
300
20,000
200
100 10,000
0 0
650 700 750 800 850 900 950 1000 1050 1100 700 750 800 850 900 950 1000 1050
Wavelength (nm) Wavelength (nm)
Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 25
Chameleon Vision and Vision-S
Integrated, Automated and Widely Tunable Ti:Sapphire Oscillators
Accessory
Compatibility
Charts
Table
Layouts
Repetition-Rate (MHz) 80
Polarization Horizontal >500:1
Pointing (µrad/nm) <80/100 total
Oscillator
Operating Voltage (VAC) 90 to 250 (auto ranging) Accessories
Maximum Operating Current (A) <15 at 90 VAC (power supply)
<7 at 90 VAC (chiller)
<2 at 90 VAC (MRU x1)
System Power Consumption (W) 2300 max., 1300 typical Amplifiers
Line Frequency (Hz) 47 to 63
Operating Temperature Range 15 to 35°C (59 to 95°F)
Weight of Laser Head 52 kg (115 lbs.)
Weight of Power Supply 33 kg (73 lbs.) Amplifier
Accessories
Umbilical Length 3m (10 ft.)
Chiller:
Dimensions (L x W x H) 27 x 20 x 38 cm (11 x 8 x 15 in.)
Weight 11 kg (25 lbs.) Laser
Measurement
MRU Air Recirculator: and Control
Dimensions (L x W x H) 46 x 43 x 8.5 cm (18 x 17 x 3 in.) Accessories
Weight 9 kg (20 lbs.)
1
Specified at peak of tuning range.
2
Average speed measured over entire tuning range. Accessory
3
Based on sech2 deconvolution of 0.65 times autocorrelation width. Compatibility
4 Charts
Measured rms in a 10 Hz to 20 MHz bandwidth.
5
Power drift in any two-hour period with less than ±1°C temperature change after a one-hour warm-up.
6
1/e2 at exit port.
7
Ratio of major to minor 1/e2 beam diameter at exit port.
Table
Layouts
Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 27
Chameleon Compact OPO and OPO-Vis
Synchronously-Pumped Optical Parametric Oscillator Accessories
Introduction
UF Product
Overview
Table of
Contents
Pump
Lasers
Oscillators
Oscillator
Accessories
Chameleon Compact OPO is a fully automated Optical
Parametric Oscillator tunable between 1000 nm and
1600 nm. Chameleon Compact OPO-Vis, in addition
Amplifiers to all the benefits of the Compact OPO, includes also
Second Harmonic Generation (SHG) outputs of the
Chameleon and the OPO signal wavelengths to provide
Amplifier additional seamless tuning between 340 and 800 nm.
Accessories
in excess of 900 nm, from 680 nm to 1600 nm, acces- plications beyond multiphoton microscopy, such as
sible within seconds. This broad and independently spectroscopy and non-linear optics. The optional idler Laser
accessible tuning range is useful for two-color MPE mi- output enables a unique automated tuning range Measurement
and Control
croscopy, SHG and THG microscopy, and CARS micros- between 340 nm and 1600 nm and 1750 nm to 4000 Accessories
copy of lipids. Wavelengths above 1.1 micron optimally nm, enabling also time-resolved vibrational spectros-
excite the new mFruit family of fluorescent proteins copy. Multi-user facilities will greatly benefit from this Accessory
at their excitation peaks, in wavelength regions of unprecedented flexibility while individual investigators Compatibility
Charts
minimum damage and deepest tissue penetration. The will appreciate how the many possible upgrades can
combination of the low pump threshold and the indus- follow their changing research objectives, even with
try-record high power of Chameleon guarantee plenty limited initial budgets. Table
of power at both the Chameleon and OPO outputs to Layouts
Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 29
Chameleon Compact OPO and OPO-Vis
Synchronously-Pumped Optical Parametric Oscillator Accessories
Amplifiers
Amplifier
Accessories
Laser
Measurement
and Control
Accessories
1600
Table
Layouts 1500
Compact OPO
1400
1300
1200
1100
1000
900
720 740 760 780 800 820 840 860 880 900
Chameleon Pump Wavelength (nm)
1600
1500
1400 Table
Layouts
1300
1200 Chameleon + OPO
1100 Chameleon + OPO SHG
1000 Chameleon SHG + OPO
Chameleon SHG + OPO SHG
900
800
700
600
500
400
300 400 500 600 700 800 900
Chameleon Pump (fundamantal or SHG)/nm
Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 31
Mira-OPO
Synchronously-Pumped Optical Parametric Oscillator Accessory
Introduction
UF Product
Overview
Table of
Contents
Pump
Lasers
Oscillators
Oscillator
Accessories
The Mira-OPO is a family of synchronously-pumped sensors are included with each unit and full electronic
optical parametric oscillators that extend the wave- control of the output wavelength is accomplished
length range of the Mira-900, Mira-HP and Vitara-T HP via either the accompanying electronics unit or a
Amplifiers ultrafast oscillators. The Mira-OPO is available in four computer with an RS-232 interface (LabVIEW program
different OPO crystal formats; Periodically Poled KTP, and RS-232 commands are supplied).
Fan-Poled KTP, Bulk KTP and Bulk CTA. The choice of
Amplifier bulk or periodically-poled crystal technology lets users FAN-PP-Automatic Version: Fan-Poled
Accessories
select the best solution – based on tuning, ease of use KTP OPO Crystal
and performance – for their specific application. For Further extending the capabilities of our PP-Automatic
Laser
maximum flexibility, any version of the Mira-OPO can OPO is a new, and truly unique, Fan-crystal option.
Measurement be upgraded to any other version. Rather than having a single fixed poling period in the
and Control
Accessories OPO gain crystal matched to one pump wavelength,
PP-Automatic Version: Periodically-Poled the crystal is poled in a fan geometry across the width
Accessory
OPO Crystal of the crystal providing a continuously variable quasi-
Compatibility This version of the Mira-OPO allows the output phase-matching period. This allows fully independent
Charts
wavelength to be tuned without changing the pump tunability between pump and OPO output wavelengths
wavelength. By taking advantage of the periodically- enabling two-color applications such as simultaneous
Table
poled, quasi-phase-matched OPO crystal, a simple MPE of different dyes, uncaging, CARS/SRS and other
Layouts electronic adjustment of the OPO’s cavity length tunes two-color pump-probe experiments.
the output wavelength. The PP crystal is designed for
pumping at a wavelength close to the peak of the Bulk KTP and CTA Crystal Versions
Ti:Sapphire gain spectrum, where the Mira output Using non-critically phase-matched crystals, the bulk
power is highest. This near fixed pump wavelength crystal version of the Mira-OPO offers high conversion
translates directly into a relatively flat power-tuning efficiency and broad tuning ranges. The OPO cavity
curve as a function of wavelength. Wavelength tuning length automatically stabilizes to maintain stability
and stabilization are achieved with a feedback loop at the chosen operation point. An optional advanced
based on a miniature spectrometer within the control scheme offers additional stabilization with
Mira-OPO head enclosure. Relative power and humidity respect to pulse width, bandwidth or power.
• Unique Fan-Poled crystal technology for independent tunability of pump and OPO wavelengths
• IR and visible/IR versions UF Product
Overview
• Simple, fast wavelength tuning
• Low pump threshold: As low as 0.5W
Table of
• Active pulse width or bandwidth stabilization (optional for Bulk Crystal version)
• Options available include: Oscillators
Choice of Linear or Ring-Cavity Designs from 500 nm to 700 nm, which fills the gap between
PP-Automatic, Fan-Poled and Bulk Crystal configura- the fundamental output and the SHG output of a
tions are available in a linear or ring-cavity design. modelocked Ti:Sapphire oscillator. All versions of the Amplifiers
The linear-cavity design is the best solution for ring-cavity configuration also include optics that cover
maximum power at IR Signal and Idler wavelengths. infrared operation.
The ring cavity Mira-OPO is the preferred choice for Amplifier
applications requiring high power in the visible range. Overall, Mira-OPOs provide the industry’s most unique Accessories
The ring-cavity design with intracavity second har- range of wavelength coverage in the infrared through
monic generation (SHG) takes advantage of the high visible spectrum. The Mira-OPO is available in femto- Laser
intracavity power to efficiently generate visible output second, picosecond or long-picosecond configurations. Measurement
and Control
Accessories
Accessory
Mira Fan Poled OPO Tuning Range Mira OPO Fan-Poled Power Tuning Curves Compatibility
Charts
(Linear IR Cavity Configuration)
Any combination of pump wavelength and OPO Signal
wavelength, indicated by the shaded area, is possible
T
Table
1700
OPO Signal Wavelength (nm)
1000
Layouts
1600
800
1500
OPO (mW)
600
1400 400
1300 200
1200 0
1000
880
1100 1100 850
1000 1200 835
800
OPO (nm) Pump (nm)
900 1300
775
700 750 800 850 900 950 1400 730
Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 33
Mira-OPO
Synchronously-Pumped Optical Parametric Oscillator Accessory
Typical Tuning Bulk KTP VIS1 & IR1 Bulk CTA IR3
Curves for 1400 1400
Introduction
Femtosecond
Average Power (mW)
Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 35
Harmonic Generation for Ultrafast Oscillators
Second, Third and Fourth-Harmonic Accessory for Ti:Sapphire Oscillators
Introduction
UF Product
Overview
Table of
Contents
Pump
Lasers
Oscillators
Oscillator
Accessories
The Harmonic Generator is an extremely flexible
and adaptable wavelength extension accessory for Key Advantages
Coherent’s entire range of ultrafast oscillators (Mira,
Amplifiers Chameleon, Vitara, Mira OPO and Chameleon Compact • Magnetically indexed crystals simplifies
OPO). A wide range of non-linear crystals and configu- SHG/THG/FHG conversion
ration options are available that span second, third and • Walk-off compensator maintains good
Amplifier fourth harmonic generation of picosecond or femtosec- beam circularity
Accessories
ond pulses at input powers up to 5W.
• Delay compensator for simple in-line THG
Laser
For third harmonic generation, the unique high generation
Measurement efficiency collinear mixing design with walk-off
and Control
Accessories compensation and in-line time delay is simple to • Easily upgradable
align without the complexity of separate optical delay • Autotracker option for SHG and THG.
Accessory
lines and fundamental and SHG spatial separation Provides automatic phase matching optimi-
Compatibility and recombination. zation as input wavelength is changed.
Charts
Table
Layouts Specifications 800 nm Input Wavelength High Power Standard THG FHG-1 FHG-2 (mixing
SHG SHG (incl. Standard (SHG of SHG) fundamental &
(SHG only) SHG) (incl. Standard THG)(incl. SHG,
SHG) THG, & FHG-1)
Conversion Efficiency/Power for input wavelength of 800 nm
Mira HP-F, 18W pump 40%/1.4W 25%/875 mW 9%/315 mW Call Factory Call Factory
Mira HP-P, 18W pump 16%/480 mW 15%/450 mW 6%/180 mW Call Factory Call Factory
Mira 900-F, 10W pump 40%/560 mW 20%/280 mW 10%/140 mW 4%/45 mW2 0.1%/1.6 mW
Mira 900-P, 10W pump 15%/210 mW 10%/140 mW 4%/56 mW Call Factory Call Factory
Mira 900-F, 5W pump Call Factory 4%/30 mW 2%/13 mW Call Factory Call Factory
Mira 900-P, 5W pump Call Factory 2%/15 mW 0.8%/5 mW Call Factory Call Factory
Input Wavelength Range (nm) 680 to 1080 680 to 1080 680 to 1080 840 to 920 760 to 840
Output Wavelength Range (nm) 340 to 540 340 to 540 227 to 3601 210 to 230 190 to 210
Dimensions (L x W x H) 385 x 286 x 221 mm 580 x 410 x 221 mm
(15.2 x 11.3 x 8.7 in.) (22.9 x 16.2 x 8.7 in.)
1 2
Requires optics change. Specified at 880 nm input wavelength.
36 Superior Reliability & Performance • www.Coherent.com • tech.sales@coherent.com
Pulse Picker
Accessory for Selecting Pulses from Modelocked Ti:Sapphire Oscillators
Introduction
UF Product
Overview
Table of
Contents
Pump
Lasers
Oscillators
Oscillator
Accessories
The Pulse Picker, a standalone accessory for selecting
pulses from femtosecond or picosecond Ti:Sapphire Key Advantages
oscillator, features a rugged optomechanical head
• For use with femtosecond or picosecond lasers
assembly and a versatile controller. Amplifiers
Table
Specifications Pulse Picker Layouts
Pulse Repetition-Rate 9.5 kHz to 4.75 MHz variable by integer division of oscillator frequency.1 The unit also can
be externally triggered at any repetition-rate below 4 MHz or operated single-shot.
Diffraction Efficiency2 (%)
TeO2 Cell >60
SiO2 Cell >50
Contrast Ratio3
TeO2 Cell >500:1
SiO2 Cell >1000:1
Wavelength Range (nm) <680 to >10804,5 (other ranges available on request)
1
The Pulse Picker accepts the nominal 76 MHz input frequency from the synchronous output photodiode of the Mira 900. A 38 MHz RF clock is divided by
8 thru 4096.
2
Percentage of incident pulse energy in diffracted output pulse.
3
Main pulse to non-adjacent pulses. Main pulse to adjacent pulse is >100: 1 TeO2 cell or >200:1 SiO2 cell. Contrast ratios for high power pumped femtosecond
systems are 0.5 times the given values for the TeO2 cell.
4
For SHG operation, the fundamental output must be pulse picked first, then frequency doubled.
5
Requires optics changes.
Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 37
Pulse Switch for Mira-900
Cavity Dumper Accessory
Introduction
UF Product
Overview
Table of
Contents
Pump
Lasers
Oscillators
Oscillator
Accessories
The Pulse Switch for Mira-900 ultrafast oscillators is Mira-900-F, Mira-900-P and 900-D, extends the
a compact, bolt-on accessory enabling cavity-dumped Mira-900’s cavity length to include the Pulse Switch’s
operation to produce higher pulse energy at lower acousto-optic modulator. An optional integrated
Amplifiers repetition-rates. frequency-doubling module that provides conversion
efficiencies up to 40% further extends the capabilities
Using intracavity acousto-optic modulation to switch of the Pulse Switch.
Amplifier pulses out of the Mira cavity provides a convenient way
Accessories
to both increase the output pulse energy and reduce Mira-900, with the addition of the Pulse Switch or its
the laser repetition-rate without using an amplifier optional frequency-doubler, is ideal for processes and
Laser
system. Providing repetition-rates from 9 MHz down experiments that benefit from lower duty cycle and/or
Measurement to single-shot, this configuration delivers up to 60 nJ higher pump intensity, such as time-correlated single-
and Control
Accessories of pulse energy. photon counting, non-linear optics, transient absorp-
tion spectroscopy, and pump-probe spectroscopy.
Accessory
The Pulse Switch accessory, compatible with both
Compatibility the femtosecond and picosecond cavities of the
Charts
Table
Layouts
80
60
40
20
0
0.1 1 10 100 1000 10,000 100,000
Pulse Repetition Rate (kHz)
Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 39
Pulse Compressors
Pulse Compression Accessories for Coherent Ti:Sapphire Oscillators
Oscillators
Oscillator
Accessories
Accessory
Compatibility
Charts Typical Compressed Pulse Width
from Vitara-T with CPC-II
20
Table
Layouts 18
16
Pulse Intensity
14
12
10
8
6
4
2
0
60 70 80 90 100 110 120 130 140 150
Bandwidth FWHM (nm)
Pulse Intensity
0.7
0.6
0.5
0.4
0.3 Oscillators
0.2
0.1
0
-50 -40 -30 -20 -10 0 10 20 30 40 50
Time (fs) Oscillator
Accessories
Table
Layouts
Typical Autocorrelation of ~10 nm Bandwidth Pulses
from Mira 900-F with SPO-I option
Autocorrelation FWHM = 108 fs
Deconvolved Pulse FWHM = 70 fs
7
Compressed Pulse (a.u.)
6
Autocorrelation of
0
-400 -300 -200 -100 0 100 200 300 400
Delay (fs)
Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 41
Synchrolock-AP
Synchronization Accessory for Mira and Vitara Ti:Sapphire Oscillators
Introduction
UF Product
Overview
Table of
Contents
Pump
Lasers
Oscillators
Oscillator
Accessories
The Synchrolock-AP is used to accurately synchronize and high frequencies. The actuators are controlled by
two Mira or Vitara-T lasers together, or to synchronize a feedback electronics while a high-speed photodiode
Mira or Vitara-T laser to an external RF source. Oper- simultaneously monitors the laser repetition-rate.
Amplifiers ating in the femtosecond or picosecond (Mira only)
regime, the Synchrolock-AP allows smooth wavelength The Synchrolock-AP uses the 9th harmonic content
tuning while keeping the lasers synchronized. of the photodiode signal to provide a higher signal-
Amplifier to-noise ratio, which leads to tighter jitter lock. In this
Accessories
Three separate actuators operate at different locations way Synchrolock-AP provides extremely low jitter while
inside the laser head to compensate low, medium ensuring long-term stability.
Laser
Measurement
and Control
Accessories GUI for Synchrolock-AP
Accessory
Compatibility
Charts
Table
Layouts
• The Synchrolock-AP accessory locks the pulse repetition-rate of one “Slave” Mira or Vitara-T laser
to another “Master” Mira or Vitara-T laser, or to a “Master” external RF source
UF Product
• Femtosecond (Mira and Vitara-T) and/or picosecond (Mira only) operation Overview
• Three cavity length actuators provide jitter stabilization over a broad bandwidth and large
dynamic range Table of
Contents
• User adjustable delay between locked pulse trains of up to 13 ns with around 22 fs resolution
(for a 76 MHz cavity)
• Simple fiberoptic coupling of slave output beam to the Synchrolock-AP detection system results Pump
Lasers
in minimal losses and ease of use
• Unique feedback locking mechanism locks to the 9th harmonic of the input signal for enhanced
signal to noise performance and tighter synchronization between slave and master oscillators Oscillators
• User-friendly GUI enables automatic locking acquisition, delay control and system monitoring
Oscillator
Accessories
1.5 t jitter = 55 fs
(RMS; 0.02 Hz to 1 kHz)
Relative Jitter (ps)
1.0
0.5
0.0
-0.5
-1.0
-1.5
-2.0
0 2 4 6 8 10 12
Time (sec)
Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 43
CEP Stabilizer for Vitara
Carrier to Envelope Phase (CEP) Stabilizer Accessory for Vitara
Introduction
UF Product
Overview
Table of
Contents
Pump
Lasers
Oscillators
Oscillator
Accessories
The Vitara CEP Stabilizer is a state-of-the art Carrier-to- Vitara CEP consists of CEP actuators incorporated in
Envelope Phase stabilizer accessory designed exclu- the Vitara-T, a quasi-collinear f-to-2f interferometer
sively for Vitara-T. and a wide bandwidth electronics feedback loop. The
Amplifiers interferometer uses a photonic crystal fiber to gener-
Through the use of active feedback control, Vitara ate an octave-scanning optical spectrum. The red end
CEP locks the carrier envelope offset frequency (wo) of this spectrum is frequency-doubled and combined
Amplifier to a fraction of the repetition-rate wr. This establishes with the green end of this same broad spectrum. A fast
Accessories
a fixed phase relation between the carrier and the photodetector senses the resultant beat frequency
envelope. Maintenance of this phase relationship is of and at wo, the carrier envelope offset frequency. Our
Laser
paramount importance in experiments such as Above- feeback electronics control the fast and slow actuators
Measurement Threshold Ionization (ATI) or generation of isolated inside the Vitara-T to stabilize wo to a fraction of the
and Control
Accessories attosecond pulses. repetition-rate which is detected by a fast photodiode
in the Vitara-T.
Accessory
Compatibility
Charts
Carrier Offset Phase CEP Self-Referencing Stabilization Scheme
Table
Layouts
SHG
beat note
• Low phase noise due to excellent common mode noise supersession in the quasi-collinear
interferometer design
UF Product
• Monolithic construction for long term stability Overview
Amplifiers
Amplifier
Accessories
Laser
Measurement
and Control
Accessories
Accessory
Vitara-T with CEP Stabilizer Compatibility
Charts
Typical Data Showing Long Term Stability of Detector Beat Note
60
Beat Note Signal To Noise
55
Table
50 Layouts
45
40
Ratio (dB)
35
30
25
20
15
10
5
0
0 1 2 3 4 5 6 7 8
Time (hours)
Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 45
Legend Elite
High-Performance, kHz Repetition-Rate, Ti:Sapphire Amplifiers
Introduction
UF Product
Overview
Table of
Contents
Pump
Lasers
Oscillators
Oscillator
Accessories
Legend Elite series amplifiers have become the top sell- Furthermore both the Legend Elite HE+ and Duo HE+
ing kHz, repetition-rate Ti:Sapphire regenerative ampli- are de facto CEP-ready, offering to the users the maxi-
fiers on the market due to their leading combination of mum forward flexibility through up-gradability.
Amplifiers performance, stability and reliability.
Legend Elite HE+: Highest power available from a re-
They feature an integrated Evolution pump laser, generative amplifier.
Amplifier a thermally stabilized regenerative amplifier and a
Accessories
stretcher/compressor in a single, compact enclosure. The Legend Elite HE+ now offers the highest output
power (up to >6W) available from a regen-only ultra-
Laser
The E-2 Engine, our regenerative amplifier module fast amplifier using thermo-electrical cooling of the
Measurement which is common to every Legend Elite amplifier, now rod. For lower power versions (up to 4W), the efficiency
and Control
Accessories includes our proprietary slab rod design to reliably of our proprietary slab rod design allows for a simple
provide high energy pulses with high efficiency – while and robust water cooled scheme.
Accessory
delivering a guaranteed beam quality unsurpassed by
Compatibility alternative designs. Powered by an integrated Evolution pump laser, the
Charts
legend Elite HE+ is very compact and when seeded by
In the last few years, Coherent has developed some an integrated Vitara ultrafast oscillator the small foot
Table
breakthrough passive and active technologies to print of such 2-box high-performance amplifier system
Layouts become a leader in both very high power (up to 15W) allows sophisticated experimental setups on a single
and Carrier to Envelope Phase (CEP) stabilized ultrafast optical table.
amplifiers for the most demanding advanced applica-
tions such as attosecond science. Legend Elite Duo HE+: highest kHz output power avail-
able with simple thermo-electrical cooling technology.
The new Legend Elite HE+ and Legend Elite Duo HE+ in-
tegrate these new technologies, including all CEP-grade For all the energy/power hungry applications,
hardware, to ensure unmatched level of intrinsic stabil- Coherent is now offering the Legend Elite Duo HE+
ity with best-in-class energy and pointing performance with up to >12 mJ of output energy per pulse at 1 kHz
(respectively specified at <0.5% rms and <10 µrad rms) or up to >15W of output power at 5 kHz. Compared
so every ultrafast application can benefit from these to the Legend Elite HE+, the Duo HE+ integrates an
cutting edge developments. additional single pass booster amplifier (additional
• E-2 Engine, thermally stabilized regenerative amplifier platform for unsurpassed performance,
reliability, and environmental stability
UF Product
• Advanced slab rod design with simple water (up to 4W) or enhanced TE (up to 15W) cooling Overview
• Ready for seeding with Vitara, Vitesse or Mira oscillators for maximum flexibility and proven stability
• Multiple upgrade paths assure initial investment meets your future needs
Oscillator
Accessories
and preserving an excellent mode quality. Legend Elite USP models are available with CEP stabi-
lization, combining the benefits of regen design (un-
Pulse Width Configurations: matched mode quality, energy and pointing stability) Amplifier
All Legend Elite HE+ and Duo HE+ are available in with a world-class CEP performance (see page 70). Accessories
Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 47
Legend Elite HE+
High-Performance, kHz Repetition-Rate, Ti:Sapphire Amplifiers
Laser
Measurement
and Control
Accessories
Accessory
Compatibility
Charts
Legend Elite HE+ Legend Elite HE+ Power Stability
Long Term Power Stability (under extreme lab conditions)
6.0 35
Table
Layouts Power (0.11% rms)
Lab Temperature (°C)
Temperature
Output Power (W)
5.5
30
5.0
25
4.5
4.0 20
0 12 24 36 48 60 72
Time (hours)
Accessory
Compatibility
Charts
Near-Field Beam Profile Typical Pulse Width Legend Elite Duo HE+
(Duo HE+ USP) ~23 fs (Duo HE+ USX) Long Term Power Stability
14.0
Table
12.0 Layouts
Autocorrelation Intensity
10.0
Output Power (W)
8.0
6.0
4.0
2.0
Power (0.35% rms)
0
Time 0 6 12 18 24
Time (hours)
Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 49
Legend Elite Cryo PA
Cryogenically-Cooled, Ti:Sapphire Power Amplifier
Introduction
UF Product
Overview
Table of
Contents
Pump
Lasers
Oscillators
Oscillator
Accessories
The Legend Elite Cryo PA is a field-proven add-on prietary vacuum cryogenic chamber, which manages
power amplifier that can increase the pulse energy the thermal conditions of the Ti:Sapphire crystal. This
output of the Legend Elite amplifiers to more than design approach minimizes beam distortion during
Amplifiers 20 mJ. Cryogenic cooling helps to produce high pump amplification. Using a single power amplifier stage
conversion efficiency and enhanced beam quality for results in a superior beam quality, simpler operation
high-power operation in various configurations with and a more compact footprint compared to traditional
Amplifier pulse widths to <30 fs and repetition-rates to 10 kHz. multi-stage configurations.
Accessories
Our integrated Evolution pump laser ensures the
system’s stable and reliable operation. The design of the pulse compressor, which is also
Laser
integral to the amplifier, is based on our experience
Measurement Operation of the Cryo PA is based on directly imaging developing terawatt amplifiers with master gratings.
and Control
Accessories the output from the Legend Elite amplifier to the This compressor design ensures high efficiency with
cryogenic amplifier without using spatial filters or minimal spatial distortion. The resultant compressed
Accessory
saturable absorbers. The Cryo PA combines the basic beam profile is highly symmetrical with typical M2
Compatibility high power amplification capabilities of cryogenically- values <1.3.
Charts
cooled Ti:Sapphire technology with Coherent’s pro-
Table
Layouts Typical Cryo PA Power Stability Typical TOPAS OPA Output Energy Pumped by
over >10 hrs., 17.5 mJ, 1 kHz Legend Elite Cryo PA at 10.5 mJ
4500 500
4000 S+I 450
3500 NDFG1 400
NDFG2 350
3000
Energy (µJ)
300
2500
250
2000
200
1500 150
1000 100
500 50
0 0
0 4000 8000 12,000 16,000 20,000
Wavelength (nm)
• Multiple interlocks for vacuum, temperature and safety provide stable system operation
Contents
Oscillators
Oscillator
Accessories
Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 51
Libra
One-Box, Ultra-Stable, kHz Repetition-Rate, Ti:Sapphire Amplifier System
Introduction
UF Product
Overview
Table of
Contents
Pump
Lasers
Oscillators
Oscillator
Accessories
Libra is the industry-leading family of integrated, established, reliable Evolution pump laser with the E-2
one-box, computer-controlled, kHz- repetition-rate, Engine module – Coherent’s thermally stabilized, high
Ti:Sapphire amplifiers. Configured in a ruggedized, efficiency, regenerative amplifier platform that includes
Amplifiers ultra-stable, compact platform, it features high perfor- a unique, Ti:Sapphire rod geometry enabling simple, wa-
mance comparable to advanced multi-box systems. ter-only cooling on all Libra models. Finally, a compact,
The compelling, customer-value advantage and market stretcher and compressor support high power, short
Amplifier success of Libra are enabled by key design innovations pulses with unsurpassed beam quality and stability.
Accessories
throughout and the Libra concept has proven itself in
a wide range of scientific applications and demanding Libra is available with a choice of pulse energy, pulse
Laser
industrial settings. duration and repetition-rates The basic Libra offers >1
Measurement mJ at 1 kHz while the Libra-HE guarantees >4.0 mJ ,and
and Control
Accessories Long term, stable, hands-free operation is enabled by the Libra-HE+ is specified at >5.0 mJ. The Libra and
several unique elements. The Vitesse oscillator, pumped Libra-HE are available in 1, 5 and 10 kHz configurations
Accessory
by Verdi, is by far the most successful industrial-grade with pulse durations of <50 fs or <100 fs. The Libra-HE+
Compatibility Ti:Sapphire oscillator as proven in hundreds of factory is offered at 1 kHz with pulse duration options of <40 fs
Charts
installations. For the shortest pulse duration Libra or <100 fs. All versions provide unsurpassed stability
model, the Vitara-S, our hands-free, wide bandwidth and beam quality, ideal for pumping one or more opti-
Table
oscillator is utilized. The design also integrates the well- cal parametric amplifiers.
Layouts
Typical Libra-HE Power Stability >14 hours, Typical Energy Stability
800 and 266 nm simultaneously 0.13% rms 120k shots
g 0 H D t
4000
3500
3000
2500
2000
1500
1000
500
0
2.430
2.431
2.432
2.433
2.434
2.435
2.436
2.437
2.438
2.439
2.439
2.440
2.441
2.442
2.443
2.444
2.445
2.446
2.447
2.448
2.449
2.450
2.450
2.451
2.452
2.453
2.454
2.455
2.456
2.457
2.458
Table
Layouts
Typical Warm-Up Typical Libra-HE Near Field Typical Libra-HE Far-Field
Stable Power after 15 min. 800 nm and 266 nm Beam Quality Beam Quality
4.0 0.8
3.5 0.7
3.0 0.6
THG Power (W)
IR Power (W)
2.5 0.5
2.0 0.4
1.5 0.3
1.0 0.2
IR Power
0.5 THG Power 0.1
0 0
0 0.05 0.1 0.15 0.2 0.25
Time (hours)
Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 53
Hidra
High Energy 10 Hz Ti:Sapphire Amplifiers
Introduction
UF Product
Overview
Table of
Contents
Pump
Lasers
Oscillators
Oscillator
Accessories
The Hidra amplifies a nanojoule pulse from a mode- In hybrid pumping, the regenerative amplifier
locked Ti:Sapphire oscillator up to terawatt peak power is pumped with an Evolution diode-pumped kHz
at 10 Hz repetition-rate. It is a multi-stage, chirped Nd:YLF laser. The multipass stage(s) are pumped
Amplifiers pulse amplifier consisting of a grating-based pulse with a lamp-pumped 10 Hz Nd:YAG laser. The main
stretcher, regenerative amplifier for first-stage ampli- advantage of hybrid pumping is improved stability.
fication, one or more power amplifier stages, followed
Amplifier by a grating-based pulse compressor. With its flexible The pulse compressor for the 10 mJ, 25 mJ and 50 mJ
Accessories
platform design and a selection of lamp-pumped and Hidra systems is contained within the Hidra enclosure.
diode-pumped solid-state lasers for pumping, all Hidra For the 100 mJ Hidra, the pulse compressor is a sepa-
Laser
configurations are upgradable to higher performance. rate unit. This external compressor for the Hidra-100 is
Measurement also available with vacuum-compatible mounts as an
and Control
Accessories Two standard pumping configurations are available: option. This version requires users to mount the entire
10 Hz-only or hybrid pumping. In 10 Hz-only pumping, compressor inside their own vacuum enclosure to sim-
Accessory
the entire amplifier (regenerative plus multipass) is plify delivery of the terawatt pulses to the experiment.
Compatibility pumped by a single 10 Hz lamp-pumped Nd:YAG laser.
Charts
Time
Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 55
RegA
High Repetition-Rate, Femtosecond Ti:Sapphire Amplifiers
Introduction
UF Product
Overview
Table of
Contents
Pump
Lasers
Oscillators
Oscillator
Accessories
With repetition-rate options to >500 kHz, the RegA The electronic control box provides complete control
9000/9040/9050 provides a unique range of perfor- of pulse timing, delivering a real-time LCD display of
mance for Ti:Sapphire amplifiers. Its use of CW pump- amplifier performance. The electronics have the ability
Amplifiers ing by the market-leading Verdi DPSS laser creates to recall and reset any system parameter.
a stable, near diffraction-limited output beam with
energy to >6 μJ at 250 kHz. At high repetition-rates, The low noise of the Verdi pump laser and high repeti-
Amplifier data acquisition for scientific experiments is faster tion-rate of RegA amplifiers enable data collection with
Accessories
and throughput is higher in processing applications. high signal-to-noise ratio in applications such as four-
The wavelength range of RegA can also be extended wave mixing or up-conversion. With hundreds of units
Laser
by adding a Coherent high repetition-rate optical installed, the RegA system is a well proven ultrafast
Measurement parametric amplifier (OPA9400/9800 series). tool for advanced ultrafast research.
and Control
Accessories
The RegA is specifically designed to amplify seed pulses
Accessory
from a Coherent Vitara, Mira or Vitesse. For oscillator/ Typical RegA Output Power and Pulse Energy
Compatibility amplifier split-pump beam configurations, the speci- Power - 12W Pump Energy - 12W Pump
Charts
fied pump laser for RegA is our Verdi G10, G12 or G18, Power - 10W Pump Energy - 10W Pump
Power - Vitesse Duo Energy - Vitesse Duo
The Vitesse Duo, which integrates the seed oscillator 1.8 10.0
Table
and amplifier pump laser into a single package, forms
1.6 9.0
Layouts the most compact configuration.
1.4 8.0
1.2
RegA 9000, the sub-60 fs RegA 9050, and the sub-40 fs 6.0
1.0
RegA 9040. The basic RegA 9000 includes the stretch- 5.0
ing, amplification and compression functions into a 0.8
4.0
single box. The RegA 9050 and RegA 9040 both use 0.6
3.0
one unit for the amplifier and a second unit containing 0.4
2.0
a stretcher and compressor.
0.2 1.0
0.0 0.0
0 50 100 150 200 250
RegA 90005 5 5 4 3 3
RegA 90006 (see note) 6 6 4 3 3
RegA 90407 6 6 4 3 NA
Oscillator
RegA 90507 6 6 4 3 NA Accessories
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
-500 0 500
Time
Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 57
OPerA Solo
Fully Integrated, Computer-Controlled Femtosecond Optical Parametric Amplifier Accessory
Introduction
UF Product
Overview
Table of
Contents
Pump
Lasers
Oscillators
Oscillator
Accessories
The OPerA Solo is a fully integrated, computer-con- approach for high-performance tunable ultrafast
trolled femtosecond optical parametric amplifier applications.
(OPA) that extends the wavelength accessibility of
Amplifiers the Legend Elite and Libra amplifiers from 190 nm The OPerA Solo design incorporates well-proven TOPAS
to 20 µm. technology in the white-light seeded, pre-amplifier
followed by a power amplifier. In the sum-frequency-
Amplifier As the first unit of its kind, the OPerA Solo integrates mixing configuration the OPerA Solo uses a fraction
Accessories
all pump conditioning optics, wavelength extension of the 800 nm pump beam directly from the Legend
options and wavelength separation optics within Elite output beam for mixing with the OPA signals.
Laser
one enclosure. This makes the OPerA Solo a very This “fresh pump beam” feature enables superior
Measurement compact, easy-to-use and stable device. When pumped spatial, spectral and temporal beam quality compared
and Control
Accessories by the Legend Elite or Libra amplifier, the OPerA Solo to designs that use the “residual” portion of the
system provides a unique, compact and reliable 800 nm pump beams.
Accessory
Compatibility
Charts
Typical OPerA Solo Tuning Curve
Legend Elite USP-1K-HE Pump (3.3 mJ)
Table 1000
Layouts Signal
Idler
SHI
SHS
Power (mW)
100 SFI
SFS
FHI
FHS
SHSFI
10 SHSFS
NDFG1
NDFG2
1
100 1000 10,000 100,000
Wavelength (nm)
Oscillators
Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 59
TOPAS
Computer-Controlled, Modular Optical Parametric Amplifier Accessory
Introduction
UF Product
Overview
Table of
Contents
Pump
Lasers
Oscillators
Oscillator
Accessories
TOPAS* is a computer-controlled optical parametric TOPAS employs a modular design with external
amplifier (OPA) used to extend the tuning range of beam-conditioning optics and wavelength extension
the Legend Elite, Legend Elite Cryo PA, Hidra, and Libra options to extend the standard tuning range from
Amplifiers ultrafast amplifiers. Femtosecond and picosecond 190 nm to 20 µm.
models are available and high energy versions can
accommodate pump energies of more than 10 mJ. The
Amplifier whitelight seeding technology in the TOPAS is featured
Accessories
on all Coherent femtosecond kHz models to ensure
the lowest output noise performance. OPA picosecond
Laser
systems use superfluorescence seeding for maximum *TOPAS is a registered trademark of Light Conversion.
Measurement efficiency at narrow bandwidths.
and Control
Accessories
• Configurations to accommodate pulse widths from all Coherent kHz femtosecond amplifiers
(<130 fs, <50 fs, <40 fs, <35 fs, <25 fs)
Pump
• High energy (HE) models available: Up to 10 mJ for Legend Elite Cryo PA and Hidra amplifiers
• Picosecond models available Oscillators
Oscillator
Accessories
Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 61
TOPAS-Prime
Computer-Controlled, Modular Optical Parametric Amplifier Accessory
Introduction
UF Product
Overview
Table of
Contents
Pump
Lasers
Oscillators
Oscillator
Accessories
TOPAS*-Prime is a computer-controlled optical para- The standard TOPAS-Prime model accepts pulse ener-
metric amplifier (OPA) providing the ability to extend gies up to 3.5 mJ, input pulse energies up to 5 mJ can be
the tuning ranges of the Legend Elite and Libra ultra- achieved with the TOPAS-PrimePlus model.
Amplifiers fast amplifier families. All of the best features from
the TOPAS-800-fs are retained in the TOPAS-Prime
including white light seeding for lowest output noise
Amplifier performance. In addition, TOPAS-Prime employs a
Accessories
monolithic housing for improved mechanical stability.
TOPAS-Prime uses a modular design and wavelength
Laser
extension packages to achieve a tuning range of *TOPAS is a registered trademark of Light Conversion.
Measurement 190 nm to 20 µm.
and Control
Accessories
• Modular option for extended tuning from 190 nm to 20 µm: Standard tuning is from 1150 nm
to 2600 nm Pump
Lasers
• Configurations to accommodate pulse widths from all Coherent kHz femtosecond amplifiers
(<130 fs, <50 fs, <40 fs, <35 fs, <25 fs)
• Multiple OPAs can be pumped with one Ti:Sapphire amplifier Oscillators
• High energy (HE) models available: Up to 10 mJ for Legend Elite Cryo PA and Hidra amplifiers
Oscillator
Accessories
Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 63
SHBC/TOPAS-400
Computer-Controlled, Line Narrowed, Optical Parametric Amplifier Accessory
Introduction
UF Product
Overview
Table of
Contents
Pump
Lasers
Oscillators
Oscillator
Accessories
The combination of SHBC and TOPAS*-400 provides converts the wide bandwidth beam at 800 nm
a unique accessory for generating narrow-band from the femtosecond ultrafast amplifier (purchased
(<20 cm-1) , tunable radiation when pumped with separately) to a narrow bandwidth beam at 400 nm.
Amplifiers the 800 nm output from a femtosecond Legend This 400 nm beam is then used to pump the TOPAS-
Elite or Libra amplifier. When used in conjunction 400-ps-WL picoseond OPA model to generate tunable,
with an additional standard femtosecond OPA, it narrow bandwidth beam from 480 nm to 2600 nm.
Amplifier offers the potential to provide both femtosecond
Accessories
and picosecond tunable beams simultaneously
using a single femtosecond amplifier. The SHBC
Laser
(Second Harmonic Bandwidth Compressor), *TOPAS is a registered trademark of Light Conversion.
Measurement
and Control
Accessories
140
120
100
80
60
40
20
0
50 1000 1500 2000 2500 3000
Wavelength (nm)
Specifications SHBC
Pump Laser1 Legend Elite, Libra
Output Wavelength (nm)(nominal) 400 Oscillators
Conversion Efficiency (%) >25
Spectral Width (cm-1) <10
Energy Stability2 (% rms) <3
Oscillator
Polarization linear, horizontal Accessories
TOPAS-400-ps-WL
Pump Laser SHBC
Wavelength Range3 (nm) 480 to 2600 Amplifiers
Pulse Energy4 (signal + Idler at peak, µJ) >50
Pulse Duration (0.5 - 1) x pump pulse width
Spectral Width (cm-1)(500 nm to 730 nm, 870 nm to 2400 nm) <20
Amplifier
Energy Stability2 (% rms)(500 nm to 700 nm, 900 nm to 2000 nm) <6 Accessories
Polarization
Signal linear, vertical
Idler linear, horizontal Laser
1
Pump with 0.3 mJ to 2 mJ, 35 fs to 200 fs from Legend Elite or Libra at 1 kHz (contact factory for other systems). Measurement
2 and Control
Under stable environmental conditions.
3 Accessories
Some energy and spectrum modulation possible in the range 730 nm to 870 nm.
4
Assuming 250 µJ, 400 nm pump from SHBC. Scales linearly with pump in range 0.3 mJ to 1 mJ.
Accessory
Compatibility
Charts
1.0 Table
1.0 Wavelength: 480 nm Layouts
FWHM: 0.33 nm
(14.3 cm-1)
0.5 0.5
0 0
399.4 399.6 399.8 400.0 400.2 400.4 400.6 479.0 479.5 480.0 480.5 481.0
Wavelength (nm) Wavelength (nm)
Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 65
Harmonic Generator System (HGS)
Second-, Third-, and Fourth-Harmonic Accessory for Ti:Sapphire Amplifiers
Introduction
UF Product
Overview
Table of
Contents
Pump
Lasers
Oscillators
Oscillator
Accessories
The HGS accessory provides extremely convenient
second-, third- or fourth-harmonic output for kHz Key Advantages
Legend Elite and Libra Ti:Sapphire amplifiers, and
Amplifiers 10 Hz Hidra Ti:Sapphire amplifiers. Second- (HGS-D) • Simple collinear mixing configurations
and third- (HGS-T) harmonic outputs are accessible • Compatible with Coherent 35 fs to 130 fs,
from a single compact unit. A second enclosure is and 0.5 ps to 2 ps Ti:Sapphire amplifiers
Amplifier added for fourth-harmonic (HGS-F) generation.
Accessories
The HGS employs collinear mixing in high-damage- • High-damage-threshold, high-conversion-
threshold BBO crystals for high efficiency and ease efficiency BBO crystals
of use. Crystal rotation and optical delay stages are
Laser
Measurement manually adjustable, and all crystals, focussing op- • Includes wavelength separation mirrors,
and Control
Accessories tics, dichroic wavelength separation mirrors, etc., are waveplates, focusing optics, etc.
included. The near-diffraction limited beam quality and • Standalone enclosure – two enclosures are
Accessory
demonstrated stability of both pulse width and beam required for fourth harmonic
Compatibility pointing from Coherent amplifiers ensure optimum
Charts
performance at the harmonic wavelengths.
Table
Layouts
Introduction
UF Product
Overview
Table of
Contents
Pump
Lasers
Oscillators
Oscillator
Accessories
The SSA accessory is designed for use over a broad
range of energies and wavelengths. Available in config- Key Advantages
urations to measure femtosecond or picosecond pulses,
this is an accurate and versatile tool compatible with • Measures temporal width of amplified pulses Amplifiers
both commercial amplifier systems – Legend Elite, Libra • Broad pulse width range: from 20 fs to 2 ps
and Hidra – and with home-built amplifier systems.
• Wavelength coverage in femtosecond Amplifier
Two femtosecond models are available (SSA-F and Hi- operation from 680 nm to 1100 nm Accessories
ing for additional wavefront tilt. In both operations the left in place after initial installation for accurate in-line
autocorrelation signal is detected by a CCD array and is measurements.
Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 67
OPA 9400/9450 and 9800/9850
Optical Parametric Amplifiers for RegA 9000/9050 Regenerative Amplifier Accessory
Introduction
UF Product
Overview
Table of
Contents
Pump
Lasers
Oscillators
Oscillator
Accessories
The OPA 9400/9450 and OPA 9800/9850 family of
optical parametric amplifiers extends the wavelength Key Advantages
coverage of the RegA 9000/RegA 9040 and RegA 9050
Amplifiers high repetition-rate (250 kHz) regenerative amplifiers • Variable repetition-rate
into the visible and infrared spectral ranges. • Multiple synchronized output beams
Amplifier These OPAs are highly efficient and easy-to-use passive • Whitelight continuum seed for
Accessories
devices. Pulses from the RegA amplifier are split into ease of tuning
two beams. One beam produces whitelight continuum
to seed the parametric amplification process while • Difference-frequency generation (DFG)
Laser
Measurement the other beam pumps the BBO non-linear crystal. options extend tuning to the mid-IR region
and Control
Accessories
To allow access to both visible and near-infrared
Accessory
output the OPA 9400/9450 is pumped with the Multiple outputs are available to provide signal and
Compatibility second harmonic (400 nm) from the RegA, while idler beams from the parametric process, as well as
Charts
the OPA 9800/9850 is pumped with the RegA’s residual beams from the whitelight continuum and
800 nm beam. RegA pump beams.
Table
Layouts
Specifications1 OPA 9400 OPA 9450 OPA 9800 OPA 9850
Repetition-Rate (kHz) 250
Pulse Energy (nJ) 80 160
Average Power (mW) 20 40
Signal Output (nm) 480 to 700 1200 to 1600
Idler Output (nm) 933 to 2300 1600 to 2400
Pulse Width <225 fs AC See Note4 <225 fs See Note4
Noise2 (%) ±2.0
Stability3 (%) ±2.0
M2 <2.0
1
Specifications based on output of one OPA, 10W Verdi pumping a RegA 9000/9050, and either Mira/Verdi or Vitesse seeding.
Same specifications apply for two simultaneously pumped OPAs at 100 kHz.
2
Peak-to-peak noise measured in one hour at 10 Hz to 100 Hz.
3
Power drift over one hour (after 15-minute warm-up); crystal temperature controlled with supplied chiller; room temperature stable <±1°C.
4
Compressible to pump pulse width using external pulse compressor (not provided).
Introduction
UF Product
Overview
Table of
Contents
Pump
Lasers
Oscillators
Oscillator
Accessories
The DFG 9800/9850 are wavelength extension
accessories for the OPA 9800 and OPA 9850 Optical Key Advantages
Parametric Amplifiers. Both the 9800 DFG and the
9850 DFG extend the tuning of Coherent OPAs into • Tunable solid-state source for mid-IR Amplifiers
Accessory
Compatibility
Charts
Table
Layouts
Specifications DFG 9800/9850
Pump Power 12W (split from Verdi G18) 10W, Verdi
DFG Conversion Efficiency at 4 μm1 >2%, 250 kHz >1.5%, 100 kHz
DFG Unit (L x W x H) 58.4 x 35.6 x 18.4 cm (23 x 14 x 7.25 in.)
Input Beam Height 12 cm (4.75 in.) above table
Output Beam Height 11.2 cm (4.40 in.) above table
1
Conversion efficiency from signal beam at 1330 nm based on 10W or 12W pump power from Verdi into RegA. Output specified at 4 µm only.
Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 69
CEP Stabilizer for Legend Elite
Carrier to Envelope Phase (CEP) Stabilization Accessory for Legend Elite
Introduction
UF Product
Overview
Table of
Contents
Pump
Lasers
Oscillators
Oscillator
Accessories
The Legend Elite CEP Stabilizer is a state-of-the-art At the heart of the Legend Elite CEP is a separate
Carrier-to-Envelope Phase stabilizer accessory designed phase detection module which includes an f-to-2f
exclusively for the Legend Elite amplifiers. interferometer. An octave-spanning optical spectrum is
Amplifiers generated by focusing a small part of the Legend Elite
Applications such as High Harmonics Generation and beam on a sapphire plate. The red end of this spectrum
Attosecond Science require CEP stabilized ultrafast is frequency-doubled and colinearly combined with the
Amplifier pulses, generated by the Vitara oscillator, to be ampli- blue end of this same broad spectrum. The resulting
Accessories
fied up to the millijoule level of energy by Legend Elite spectral interference fringes are measured, on every
amplifiers while conserving the CEP stability. shot, by an analog detector which generates a signal
Laser
to stabilize and control the Carrier- Envelope Phase by
Measurement The Legend Elite CEP stabilizer includes an active feed- making adjustments in the Legend Elite amplifier.
and Control
Accessories back control to lock the phase velocity of the oscillating
light field to the group velocity of the phase envelope. With the CEP stabilized Verdi pumped Vitara and
Accessory
Thus, for ultra-short pulses consisting of only a few Evolution pumped Legend Elite, Coherent is the first
Compatibility optical cycles, the peak of the oscillating electrical field and only company to offer a complete CEP stabilized
Charts
can be maximized under the phase envelope. ultrafast amplifier system designed and built by a
single manufacturer.
Table
Layouts
Oscillator
Accessories
Amplifiers
Amplifier
Accessories
Laser
Measurement
and Control
Accessories
2
154 mrad (rms) Table
CE Phase (rad)
Layouts
1
-1
-2
-3
0 10 20 30 40 50 60
Time (minutes)
Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 71
Laser Measurement and Control Accessories
Matrix of Recommendations
Below and on the following page are recommendations for selecting the power and energy
Introduction measurement tools for your ultrafast setup. Our power sensors measure the output of all
Coherent pump lasers, amplifiers and oscillators, while our pulse energy measurement systems
are designed for pump sources or oscillators having repetition-rates less than 10 kHz. And our
energy sensors give you immediate feedback when peaking the output of your ultrafast system.
UF Product
Overview All Coherent power and energy measurement products offer superior performance for applica-
tions requiring the precise pulse energy specifications.
Table of
Contents
Meter, Sensor Laser Power Meter Power Sensor Energy Meter Energy Sensor
and Accessory Pump Lasers
Compatibility Verdi G2, G5, G7, G8 FieldMaxII-TO PM10 - -
Verdi G10, G12, G15, G18 FieldMaxII-TO PM30 - -
Pump
Lasers Evolution-15/30 FieldMaxII-TO PM30 LabMax-TOP J-25MT-10KHZ1
Evolution-45 FieldMaxII-TO PM150 LabMax-TOP J-50MT-10KHZ2
Evolution-HE FieldMaxII-TO PM150 - -
Oscillators
Oscillators Vitara FieldMaxII-TO PM10 or PS103 - -
Mira-900 FieldMaxII-TO PM10 - -
Mira-HP FieldMaxII-TO PM10 - -
Oscillator Chameleon FieldMaxII-TO PM10 - -
Accessories Vitesse FieldMaxII-TO PM10 or PS103 - -
Oscillator Accessories
Mira-OPO FieldMaxII-TO PS10 - -
Chameleon Compact OPO/OPO-Vis FieldMaxII-TO PS10 - -
Amplifiers
Amplifiers4
Legend Elite HE+(F, P, USP, USX) FieldMaxII-TO PM10 LabMax-TOP J-25MT-10KHZ
Legend Elite Duo HE+ (F, P, USP, USX) FieldMaxII-TO PM30 LabMax-TOP J-25MT-10KHZ1
Amplifier Legend Cryo PA FieldMaxII-TO PM30 LabMax-TOP J-25MT-10KHZ1
Accessories
Libra FieldMaxII-TO PM10 LabMax-TOP J-25MT-10KHZ1
RegA 9000/9050 FieldMaxII-TO PS10
Laser Hidra FieldMaxII-TO PM10V1 FieldMaxII-TOP J-50MB-YAG
Measurement
and Control Amplifier Accessories
Accessories OPerA Solo FieldMaxII-TO PM10 or PS103 LabMax-TOP J-10MT-10KHZ
(<1 mJ pump)
J-10MB-HE
Accessory (>1 mJ pump)
Compatibility
Charts TOPAS/TOPAS-Prime FieldMaxII-TO PM10 or PS103 LabMax-TOP J-10MT-10KHZ
(<1 mJ pump)
J-10MB-HE
(>1 mJ pump)
Table 1
Layouts With medium heat sink.
2
With large heat sink.
3
The PS10 is recommended when making higher resolution or low power measurements.
4
See above for sensors to measure pump lasers.
Oscillators
Ultrafast Accessory Legend Elite/ Legend Elite Duo Hidra RegA
Amplifiers Elite HE/Libra
Accessory Harmonic Generators (HGS) X X X
Compatibility
Chart OPerA Solo X X
1
Oscillator
Accessories
TOPAS X X
1
X
TOPAS-HE X X
OPA 9400/9450 and 9800/9850 X
Amplifiers
DFG 9800/9850 X
Single-Shot Autocorrelator (SSA) X X X
1
Up to 3.5 mJ pump beam.
Amplifier
Accessories
Laser
Measurement
Ultrafast Accessory Vitara-S Vitara-T Vitara-T HP Vitesse Mira F Chameleon and Control
Amplifiers Accessories
Legend Elite USX X
Seed
Compatibility Legend Elite USP/Hidra USP X X X
Accessory
Chart Legend Elite F/Hidra F X X X X X X1 Compatibility
Charts
Legend Elite P/Hidra P X X X X X
RegA 9000 Call Call Call X X
Factory Factory Factory
Table
RegA 9050/9040 X X X Layouts
1
At <180 fs.
Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 73
Ultrafast Table Layouts
Sample Configurations*
Vitara + Hidra 50 Hybrid + Evolution 15 + YAG Pump Laser Vitara + Legend Elite + TOPAS
Introduction
Vitara
10Hz YAG Pump Laser
Vitara
Table of
Contents
Legend Elite HE+
Hidra 50
Hybrid
Evolution 15
UF Product
Overview
Topas-C
Pump
Lasers Vitara + Legend Elite + HGS Vitara + Legend Elite DUO + Evolution 30/45 (optional)
Vitara
Vitara
Oscillators
Vitara + Legend Elite + OPerA Solo Vitara + Legend Elite DUO + 2X OPerA Solo
Amplifier Vitara
Accessories Vitara
4' X 8'
Table
Layouts
Vitara + Legend Elite + Cryo PA
Vitara
Legend Elite Cryo PA
4' X 12'
Vitara + RegA 9050 + OPA 9850 + DFG 9850 Vitara + Hidra 50 + YAG Pump Laser
Introduction
Vitara EC 9150
Vitara Table of
Contents
RegA 9050
OPA 9850 UF Product
Hidra 50
Overview
4' X 8'
Pump
Verdi G + Mira + Legend Elite Lasers
5' X 8'
Mira
Libra + 2 x OPerA Solo
Oscillators
OPerA Solo
Legend Elite HE+
Verdi G
Libra Oscillator
Accessories
OPerA Solo
Amplifier
Accessories
Vitesse Duo + RegA 9000 + OPA 9400
Laser
Measurement
Verdi G
and Control
Accessories
Mira OPO
Verdi G18
4' X 8'
Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 75
How to Contact Us
Contact Us by Phone
Coherent, Inc.
(800) 527-3786 or (408) 764-4983
Contact Us by Email
Laser Products: tech.sales@coherent.com
Service: product.support@coherent.com
76
Visit the Coherent Website
for more information about how Coherent can
enable your ultrafast laser application.
www.Coherent.com
• Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Fax: (800) 362-1170
Coherent, Inc. Germany Netherlands
5100 Patrick Henry Drive Coherent GmbH Coherent B.V.
Santa Clara, CA 95054 Dieselstraße 5b Smart Business Park
United States D-64807 Dieburg Kanaalweg 18A
Toll Free: 1-800-527-3786 Germany 3526 KL Utrecht
Tel: (408) 764-4983 Tel: +49-6071-968-333 Netherlands
Fax: (408) 764-4646 Fax: +49-6071-968-499 Tel: +31-30-280-6060
www.Coherent.com www.Coherent.de Fax: +31-30-280-6077
www.Coherent.nl
China Italy
Coherent Inc., Beijing Coherent Italia Taiwan
Room 215 Yin Gu Building Via Borgese, 14 Coherent Taiwan
No. 9 Beisihuan Xi Road Milano, 20154 2F-5, No. 38. Taiyuan St.
Haidian District Italy Zubei City,
Beijing, 100080, China Tel: +39-02-31-03-951 Hsinchu County 30265
Tel: +86-10-8215-3600 Fax: +39-02-31-03-95-55 Taiwan
Fax: +86-10-6280-0129 www.Coherent.it Tel: +886-3-505-2900
www.Coherent.com.cn www.Coherent.com
Japan
France Coherent Japan, Inc. United Kingdom
Coherent France Toyo MK Building Coherent UK Ltd.
Parc Technopolis 7-2-14 Toyo St Thomas’ Place
3, Avenue du Canada Koto-ku, Tokyo 135-0016 Cambridgeshire Business Park
Bâtiment Zeta Japan Ely
91978 Courtaboeuf cedex Tel: +81 3-5635-8680 CB7 4EX
France Fax: +81 3-5635-8701 England
Tel: +33-1-80-38-10-00 www.Coherent.co.jp Tel: +44-1353-658-833
Fax: +33-1-80-38-10-01 Fax: +44-1353-659-110
www.Coherent.fr Korea www.Coherent.com
No. 101, Eagle Town
278-20, 3 dong
Seongsu 2 ga
Seongdong-gu, Seoul
133-832, South Korea
Tel: +82 2 460 7900
www.Coherent.com