1.The tendon profile of given equivalent loading is? b) Average stress
c) Bondage stress d) Anchorage stre
5. The creep coefficient varies from a minimum value of
___________ a) 2.0 b) 1.5 c) 2.5 d) 1.0
6. The locus of the points of application of resultant force
a) b) in any structure is termed as ___________ a) Pressure line b) Hollow line c) Beam line d) Tendon line
7. The web shear cracks are developed when the beam is
subjected to __________ a) Point load b) Concentrated loads c) d) c) Shear loads d) Uniformly distributed load
8. The spacing provided for shear reinforcement is given
as __________ a) Sv = (Asv0.87fy/0.4b) b) Sv = (Asv0.91fy/0.4b) 2. The shape of the bending moment diagram results c) Sv = (Asv0.12fy/0.4b) from ___________ d) Sv = (Asv0.23fy/0.4b) a) Tendon profile b) External loads 9. The relaxation of stress in steel changes according to c) Cable profile the variation in ____________ d) Compression a) Stress b) Strain 3. The frictional and anchorage slip losses are observed in c) Creep ____________ d) Shrinkage a) Post tensioned members b) Pretensioned members 10. In reinforced concrete members the pre-stress is c) Ruptured members commonly introduced by ___________ d) Tensile members a) Tensioning the steel reinforcement b) Tendons 4. The loss of stress due to successive tensioning of c) Shortening of concrete curved cables in elastic deformation of concrete is d) Rings estimated by considering ___________ a) Initial stress