Professional Documents
Culture Documents
AV Receiver
Owner’s Manual
Read the supplied booklet “Safety Brochure” before using the unit.
English
00_HTR-2067_om_En.book Page 2 Monday, January 27, 2014 9:33 AM
CONTENTS
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 PLAYBACK 24
FEATURES 5 Basic playback procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Switching information on the front display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
What you can do with the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Selecting the input source and favorite settings with one touch
(SCENE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Part names and functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Configuring scene assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Front display (indicators) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Selecting the sound mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Rear panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Enjoying sound field effects (CINEMA DSP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Enjoying unprocessed playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Enhancing the bass (Extra Bass) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Enjoying compressed music with enhanced sound (Compressed Music Enhancer) . . . . . . . . . . . . . . . . . . . 30
PREPARATIONS 11
Listening to FM radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Setting the frequency steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
General setup procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Selecting a frequency for reception . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Registering favorite radio stations (presets) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
1 Placing speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Configuring playback settings for different playback sources
2 Connecting speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
(Option menu) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Input/output jacks and cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Option menu items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
3 Connecting a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
4 Connecting playback devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 CONFIGURATIONS 37
Connecting video devices (such as BD/DVD players) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Connecting audio devices (such as CD players) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Configuring various functions (Setup menu) . . . . . . . . . . . . . . . . . . . . . . 37
5 Connecting the FM antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Setup menu items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Speaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
6 Connecting the power cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
7 Selecting an on-screen menu language . . . . . . . . . . . . . . . . . . . . . . . . . 21 Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
ECO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
8 Configure the speaker settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
En 2
00_HTR-2067_om_En.book Page 3 Monday, January 27, 2014 9:33 AM
APPENDIX 52
Information on HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
HDMI Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Audio Return Channel (ARC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
HDMI signal compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
En 3
00_HTR-2067_om_En.book Page 4 Monday, January 27, 2014 9:33 AM
30° 30°
• indicates precautions for use of the unit and its feature limitations.
Accessories En 4
00_HTR-2067_om_En.book Page 5 Monday, January 27, 2014 9:33 AM
FEATURES
What you can do with the unit
Speakers
Audio
HDMI Control
Audio/Video
BD/DVD player Audio/Video
TV
AV receiver (the unit)
Front panel
1 2 3 4 5 6 7 8 9
VOLUME
SCENE
BD
DVD TV CD RADIO
SILENT CINEMA
: A BC D E F
1 2 3 4 5 6 7
SP IMP.••8 MIN
ECO
ADAPTIVE DRC
8 9 0 9 A B
Rear panel
1 2 3
ARC
ANTENNA
(BD/DVD)
HDMI OUT
HDMI 1 HDMI 2 HDMI 3 HDMI 4
FM
SPEAKERS
FRONT
Remote control
1 Remote control signal transmitter B External device operation keys
1 Transmits infrared signals. Control playback or operate menus of the playback devices
connected to the unit with an HDMI cable.
TRANSMIT 2 TRANSMIT indicator
2 Lights up when remote control signals are transmitted.
RECEIVER
3 SLEEP C 3 SLEEP key • The playback devices must support HDMI Control. However,
1 2 3 Switches the unit to standby mode automatically after a Yamaha does not assure the operation of all HDMI Control-
HDMI specified period of time has elapsed (sleep timer). Press compatible devices.
4 repeatedly to set the time (120 min, 90 min, 60 min, 30 min, C RECEIVER z key
4 off).
1 2 3 Turns on/off (standby) the unit.
AUDIO 4 Input selection keys
4 5
D OPTION key
Select an input source for playback.
Displays the option menu (p.34).
FM HDMI 1–4 HDMI 1–4 jacks
5 TUNER AUDIO 1–5 AUDIO 1–5 jacks E VOLUME keys
MEMORY
Adjust the volume.
PRESET TUNING 5 Radio keys
6 INFO
Operate the FM radio (p.31). F MUTE key
MOVIE MUSIC SUR. DECODE FM Switches to FM radio. Mutes the audio output.
7 SOUND
BASS ENHANCER STRAIGHT
MEMORY Registers FM radio stations as presets.
PRESET Select a preset station.
SCENE TUNING Select the radio frequency.
8 BD
DVD TV CD RADIO
6 INFO key
SETUP OPTION D
9 Selects the information displayed on the front display (p.24).
7 Sound mode keys
ENTER VOLUME E
0 RETURN DISPLAY
Select a sound mode (p.26).
8 SCENE keys
Select the registered input source and sound program with
TOP
MENU
POP-UP
MENU
MUTE F one touch. Also, turns on the unit when it is in standby mode
A MODE (p.25).
B 9 SETUP key
Displays the setup menu (p.37).
0 Menu operation keys
Cursor keys Select a menu or a parameter.
ENTER Confirms a selected item.
RETURN Returns to the previous screen.
A MODE key
Switches between “Stereo” and “Mono” for FM radio
reception (p.31).
PREPARATIONS
General setup procedure
1 Placing speakers (p.12) Select the speaker layout for the number of speakers that you are using and place them in your room.
4 Connecting playback devices (p.17) Connect video devices (such as BD/DVD players) and audio devices (such as CD players) to the unit.
5 Connecting the FM antenna (p.19) Connect the supplied FM antenna to the unit.
6 Connecting the power cable (p.20) After all the connections are complete, plug in the power cable.
8 Configure the speaker settings (p.22) Configure the speaker settings of the unit to create an optimum surround sound field.
This completes all the preparations. Enjoy playing movies, music, radio and other content with the unit!
1 2 3 4 5 6 7 8
1 Placing speakers
Select the speaker layout for the number of speakers that you are using and place the speakers and subwoofer in your room. This section describes the representative speaker layout
examples.
Caution
• Use speakers with an impedance of at least 6 Ω.
* Place the surround speakers in front and set "Virtual CINEMA FRONT" (p.41) in the "Setup" menu to "On".
1 2 3 4 5 6 7 8
5.1-channel system
5.1-channel system (Virtual CINEMA FRONT) 4.1-channel system
1 2 1 2 1 2
4 5
9 3 9 3 9
4 5 4 5
10° to 30° 10° to 30° 10° to 30° 10° to 30°
3.1-channel system • To utilize this configuration, set "Virtual CINEMA FRONT" (p.41) in 2.1-channel system
the "Setup" menu to "On".
• You can enjoy surround sound even without the center speaker
1 2 1 2
(front 4.1-channel system).
9 3 9
1 2 3 4 5 6 7 8
2 Connecting speakers
Connect the speakers placed in your room to the unit. 5.1-channel system ■ Connecting speaker cables
The following diagrams provide connections for a
5.1-channel system as an example. For other systems, Speaker cables have two wires. One is for connecting
The unit (rear) the negative (-) terminal of the unit and the speaker, and
connect speakers while referring to the connection SPEAKERS
the other is for the positive (+) terminal. If the wires are
diagram for the 5.1-channel system. FRONT
SUB
WOOFER
SURROUND CENTER
colored to prevent confusion, connect the black wire to
Caution the negative and the other wire to the positive terminal.
• Remove the unit’s power cable from an AC wall outlet and turn (Connecting front speakers)
off the subwoofer (with built-in amplifier) before connecting the
speakers. a Remove approximately 10 mm (3/8”) of insulation from
• Ensure that the core wires of the speaker cable do not touch the ends of the speaker cable and twist the bare wires of
one another or come into contact with the unit’s metal parts. the cable firmly together.
Doing so may damage the unit or the speakers. If the speaker
cables short circuit, “Check SP Wires” will appear on the front b Loosen the speaker terminal.
display when the unit is turned on. c Insert the bare wires of the cable into the gap on the side
(upper right or bottom left) of the terminal.
Cables required for connection d Tighten the terminal.
(commercially available)
Speaker cables (x the number of speakers) + (red) FR
c
1 2 b
ON
T
+ +
– –
a
Audio pin cable (x1: When using a subwoofer with built- 9 3 d
in amplifier.) - (black)
a FR
ON
Banana plug
T
1 2 3 4 5 6 7 8
a
d b + (red)
c - (black)
1 2 3 4 5 6 7 8
HDMI cable
❑ AUDIO jacks
(Stereo L/R jacks)
• Use a 19-pin HDMI cable with the HDMI logo. We recommend using Transmit analog stereo audio signals. Use a stereo pin
a cable less than 5.0 m (16.4 ft) long to prevent signal quality
degradation. cable (RCA cable).
■ Audio jacks
❑ OPTICAL jacks
Transmit digital audio signals. Use a digital optical
cable. Remove the tip protector (if available) before
using the cable.
OPTICAL
1 2 3 4 5 6 7 8
HDMI OUT
AUDIO 1
( TV )
AUDIO 2 AUDIO 3
(CD)
( TV )
AUDIO 4 AUDIO 5
HDMI 1–4 jacks
OPTICAL
OPTICAL COAXIAL COAXIAL O O
OPTICAL
The unit (rear)
(BD/DVD)
TV HDMI 1 HDMI 2 HDMI 3 HDMI 4
HDMI
HDMI
• You do not make a digital optical cable connection between the TV and the unit in the following cases: AUDIO 1 AUDIO 2 AUDIO 3 AUDIO 4 AUDIO 5
( TV ) (CD)
• If you connect a TV that supports HDMI Control to the unit with an HDMI cable, you can control the unit’s
power and volume with the TV’s remote control. Video device
If you select the input source by pressing HDMI 1–4, the video/audio played back on
To use HDMI Control and ARC, you need to configure the HDMI settings on the unit. For
the video device will be output from the unit.
details on the settings, see “Information on HDMI” (p.59).
PREPARATIONS ➤ Connecting a TV En 17
00_HTR-2067_om_En.book Page 18 Monday, January 27, 2014 9:33 AM
1 2 3 4 5 6 7 8
HDMI Digital coaxial HDMI 1–4 AUDIO 2–3 (COAXIAL) 4 Use the cursor keys (q/w) to select “Audio In” and press ENTER.
Analog stereo HDMI 1–4 AUDIO 4–5 (AUDIO) CHARGE ENHANCER STEREO TUNED SLEEP MUTE
OUT VOL.
ECO
ADAPTIVE DRC VIRTUAL
ARC
HDMI OUT
(BD/DVD)
HDMI output 6 Press OPTION.
HDMI 1 HDMI 2 HDMI 3 HDMI 4
HDMI
This completes the necessary settings.
HDMI
If you select “HDMI 2” as the input source by pressing HDMI 2, the video/audio played
AUDIO 1
( TV )
AUDIO 2 AUDIO 3
(CD)
AUDIO 4 AUDIO 5
AUDIO 5
L
back on the video device will be output from the unit.
L
AUDIO
R L
OPTICAL COAXIAL COAXIAL
SUBWOOFER
PRE OUT
R L
R
Video device
R
1 2 3 4 5 6 7 8
Audio output jacks on audio device Audio input jacks on the unit FM antenna
ARC
HDMI OUT
(BD/DVD)
HDMI 1 HDMI 2 HDMI 3
O O
SPEAKERS
OPTICAL OPTICAL FRONT
AUDIO 4 AUDIO 5
C C
COAXIAL COAXIAL
AUDIO 1
( TV )
AUDIO 2 AUDIO 3
(CD)
AUDIO 4 AUDIO 5
L L
Audio device
SUBWOOFER
PRE OUT
L L
R R
If you select the input source by pressing AUDIO 1–5, the audio played back on the
audio device will be output from the unit.
1 2 3 4 5 6 7 8
• Make sure you set VOLTAGE SELECTOR of the unit BEFORE plugging the power cable into an AC
wall outlet. Improper setting of VOLTAGE SELECTOR may cause damage to the unit and create a
potential fire hazard.
VOLTAGE
SELECTOR
ANTENNA 110V–
FM 120V
220V–
240V
SPEAKERS
FRONT
After all the connections are complete, plug in the power cable.
ANTENNA
FM
SPEAKERS
FRONT
To an AC wall outlet
1 2 3 4 5 6 7 8
TRANSMIT
RECEIVER
7 Selecting an on-screen menu language
SLEEP RECEIVER z
Select the desired on-screen menu language from English,
HDMI
1
4
2 3
Japanese, French, German, Spanish, Russian, Italian and Chinese. 6 To exit from the menu, press SETUP.
AUDIO
1
4
2
5
3
1 Press RECEIVER z to turn on the unit.
• The information on the front display is provided in English only.
TUNER
FM
2 Turn on the TV and switch the TV input to display
MEMORY
PRESET TUNING
video from the unit (HDMI OUT jack).
INFO
SOUND
BASS ENHANCER STRAIGHT
• Operations with TV screen are available only when your TV is connected to
SCENE
the unit via HDMI. If not, carry out operations while viewing the front display.
BD TV CD RADIO
DVD
RETURN
ENTER
DISPLAY
VOLUME Cursor keys
Cursor
ENTER
keys
4 Use the cursor keys to select “Language” and press
ENTER.
TOP POP-UP MUTE
MENU MENU
MODE
Setup
Speaker English
HDMI 日本語
Sound Français
Deutsch
ECO
Español
Function
Русский
Language Italiano
中文
Setup
Speaker English
HDMI 日本語
Sound Français
ECO Deutsch
Español
Function
Русский
Language
Italiano
中文
1 2 3 4 5 6 7 8
TRANSMIT
RECEIVER
8 Configure the speaker settings
SLEEP
RECEIVER z
4
2 3
INFO
MEMORY
PRESET TUNING 3 Press SETUP. Center
Selects whether or not a center
speaker is connected and its size.
Small, Large, None
MODE
4 Use the cursor keys to select “Speaker” and press 6 Set the distance between each speaker and
ENTER. listening position.
a Use the cursor keys to select “Distance” and press ENTER.
5 Configure the output characteristics of the b Use the cursor keys (q/w) to select speaker and cursor keys
speakers. (e/r) to set distance.
a Use the cursor keys to select “Configuration” and press ENTER.
b Use the cursor keys (q/w) to select an item and cursor keys Distance
1 2 3 4 5 6 7 8
RECEIVER
RECEIVER z Speaker Setting range Speaker Setting range
SLEEP
7
TOP POP-UP MUTE
MENU MENU
Adjust the volume of each speaker.
MODE
a Use the cursor keys to select “Test Tone” and press ENTER.
8 To exit from the menu, press SETUP.
The speaker settings are complete.
b Use the cursor keys (e/r) to select “On” to enable the test tone
output and press RETURN.
c Use the cursor keys (q/w) to select “Level” and press ENTER.
d Use the cursor keys (q/w) to select a speaker to output test
tones.
Level
Front L 0.0dB
Front R 0.0dB
Center -1.0dB
Surround L -1.0dB
Surround R -1.0dB
Subwoofer 0.0dB
Back: RETURN
TRANSMIT
SLEEP
RECEIVER
PLAYBACK
1 2 3
HDMI
4
Basic playback procedure
Input selection keys
Input
1 2 3 selection
Switching information on the front display
AUDIO
4 5
keys
1 Turn on the external devices (such as a TV or BD/
FM DVD player) connected to the unit.
TUNER
MEMORY
1 Press INFO.
INFO
PRESET TUNING
INFO 2 Use the input selection keys to select an input Each time you press the key, the displayed item changes.
MOVIE MUSIC SUR. DECODE
source.
CHARGE ENHANCER STEREO TUNED SLEEP MUTE
SOUND
BASS ENHANCER STRAIGHT OUT VOL.
3
ECO
ADAPTIVE DRC VIRTUAL
BD
DVD TV
SCENE
CD RADIO
Start playback on the external device or select a Audio Decoder
SETUP OPTION
radio station. Item name
Refer to the instruction manual for the external device. About 3 seconds later, the corresponding information for
ENTER VOLUME VOLUME
For details on the following operations, see the the displayed item appears.
RETURN DISPLAY
corresponding pages. CHARGE ENHANCER STEREO TUNED SLEEP MUTE
MODE
†‡Pro Logic
4 Press VOLUME to adjust the volume. Information
• To mute the audio output, press MUTE. Press MUTE again to unmute. • Available items vary depending on the selected input source. The displayed
item can also be applied separately to each input source group.
• To adjust the treble/bass settings, use the “Option” menu or TONE
CONTROL on the front panel (p.35). Input source group Item
HDMI 1–4 Input (input source name), DSP Program (sound
AUDIO 1–5 mode name), Audio Decoder (decoder name*)
Frequency (frequency), DSP Program (sound mode
TUNER
name), Audio Decoder (decoder name*)
* The name of the audio decoder currently activated is displayed. If no audio
decoder is activated, “Decoder Off” appears.
TRANSMIT
RECEIVER
Selecting the input source and favorite settings with one touch (SCENE)
SLEEP
1 2 3
The SCENE function allows you to select the assigned input source, Configuring scene assignments
HDMI sound program, and Compressed Music Enhancer on/off with just
4
one touch.
1 2 3
RETURN DISPLAY
TV AUDIO 1 STRAIGHT On On SET Complete
TOP POP-UP MUTE
MENU MENU
CD AUDIO 3 STRAIGHT Off Off
MODE
MUSIC
RADIO TUNER On Off
(5ch Stereo)
• The SCENE link playback function allows you to automatically turn on the TV or
start playback of an external device connected to the unit via HDMI, in conjunction
with a scene selection. To enable SCENE link playback, set “SCENE” (p.44) in the
“Setup” menu to “On”.
PLAYBACK ➤ Selecting the input source and favorite settings with one touch (SCENE) En 25
00_HTR-2067_om_En.book Page 26 Monday, January 27, 2014 9:33 AM
TRANSMIT
RECEIVER
Selecting the sound mode
SLEEP
1 2 3
The unit is equipped with a variety of sound programs and
HDMI surround decoders that allow you to enjoy playback sources with
4 • You can also switch the sound programs and surround decoder by pressing
your favorite sound mode (such as sound field effect or stereo PROGRAM on the front panel.
1 2 3
playback).
AUDIO • The sound mode can be applied separately to each input source.
4 5
• When you play back audio signals with a sampling rate of higher than 96 kHz, the
FM ❑ Selecting a sound program suitable for movies straight decode mode (p.29) is automatically selected.
TUNER
MEMORY
• Press MOVIE repeatedly. • You can check which speakers are currently outputting sound by looking at the
PRESET TUNING
INFO
MOVIE speaker indicators on the unit’s front panel (p.8).
MUSIC This mode lets you enjoy sound field effects optimized for viewing
MOVIE MUSIC SUR. DECODE
SOUND
SUR.DECODE video sources, such as movies, TV programs, and games (p.27).
BASS ENHANCER STRAIGHT STRAIGHT
BASS
BD
DVD TV
SCENE
RETURN DISPLAY
This mode lets you enjoy sound field effects optimized for listening
music sources or stereo playback (p.28).
TOP POP-UP MUTE
MENU MENU
Enjoying sound field effects (CINEMA DSP) ■ Sound programs suitable for movies (MOVIE)
The following sound programs are optimized for viewing video sources, such as
movies, TV programs, and games.
The unit is equipped with a variety of sound programs that utilize Yamaha’s original DSP This program creates a sound field that emphasizes the surround feeling
without disturbing the original acoustic positioning of multichannel audio,
technology (CINEMA DSP). It allows you to easily create sound fields like actual movie Standard such as Dolby Digital and DTS. Its design is based on the concept of the
theaters or concert halls in your room. ideal movie theater, in which the audience is surrounded by beautiful
reverberations from the left, right, and rear.
Sound program category
This program delivers the scale and grandeur of spectacular movie
“CINEMA DSP” lights up productions. It delivers an expansive sound space to match the
Spectacle
CHARGE ENHANCER STEREO TUNED SLEEP MUTE
cinemascope wide-screen, and boasts a broad dynamic range, providing
OUT
ECO
VOL. everything from small delicate sounds to powerful loud booms.
ADAPTIVE DRC VIRTUAL
Sci-Fi This program clearly reproduces the finely elaborated sound design of the
latest Sci-Fi and SFX movies. You can enjoy a variety of
Sci-Fi
Sound program cinematographically created virtual spaces reproduced with clear
separation between dialogue, sound effects, and background music.
This program is ideal for reproducing the sound design of action and
• You can adjust the sound field effect level in “DSP Level” (p.35) in the “Option” menu. adventure movies precisely. The sound field restrains reverberations, but
puts emphasis on reproducing a sensation of expansiveness on both sides,
Adventure
powerful space expanded widely to the left and right. The restrained depth
■ Enjoying sound field effects without surround speakers creates a clear and powerful space, while also maintaining the articulation
of the sounds and the separation of the channels.
(Virtual CINEMA DSP) This program features stable reverberations that match a wide range of
If you select one of the sound programs (except 2ch Stereo and 5ch Stereo) when no movie genres, from serious dramas to musicals and comedies. The
surround speakers are connected, the unit automatically creates the surround sound reverberations are modest, but suitably stereophonic. The sound effects
Drama
and background music are reproduced with a gentle echo that does not
field using the front-side speakers.
impinge on the articulation of the dialogue. You’ll never get tired listening for
long periods.
■ Enjoying surround sound with 5 speakers placed in This program reproduces monaural video sources, such as classic movies,
in an atmosphere of a good old movie theater. The program creates a
front (Virtual CINEMA FRONT) Mono Movie
pleasant space with depth, by adding breadth and the appropriate
You can enjoy the surround sound even when the surround speakers are placed in reverberation to the original audio.
front. This program allows listeners to enjoy the rich vividness of sport broadcasts
and light entertainment programs. In sports broadcasts, the commentators’
Sports voices are positioned clearly at the center, while the atmosphere inside the
■ Enjoying surround sound with headphones stadium is realistically conveyed by the peripheral delivery of the sounds of
the fans in a suitable space.
(SILENT CINEMA)
This program is suitable for action games, such as car racing and fighting
games. The reality of, and emphasis on, various effects makes the player
Action Game feel like they are right in the middle of the action, allowing for greater
concentration. Use this program in combination with Compressed Music
You can enjoy surround or sound field effects, like a multichannel speaker system, with Enhancer for a more dynamic and strong sound field.
stereo headphones by connecting the headphones to the PHONES jack and selecting
This program is suitable for role-playing and adventure games. This
a sound program or a surround decoder. program adds depth to the sound field for natural and realistic reproduction
Roleplaying Game of background music, special effects, and dialogue from a wide variety of
scenes. Use this program in combination with Compressed Music
Enhancer for a clearer and more spatial sound field.
MEMORY
When the straight decode mode is enabled, each speaker 1 Press SUR.DECODE to select a surround decoder.
PRESET TUNING produces its own channel audio signal (without sound field Each time you press the key, the surround decoder
INFO
processing). When you play back 2-channel sources, such as a CD changes.
MOVIE MUSIC SUR. DECODE
SOUND
SUR. DECODE player, stereo sound is heard from the front speakers. When you
BASS ENHANCER STRAIGHT STRAIGHT play back multichannel sources, the unit produces unprocessed CHARGE ENHANCER STEREO TUNED SLEEP MUTE
OUT VOL.
ECO
SCENE
multichannel sounds. ADAPTIVE DRC VIRTUAL
BD
DVD
SETUP
TV CD
OPTION
RADIO
†‡Pro Logic
1 Press STRAIGHT.
bPro Logic
Uses the Dolby Pro Logic decoder suitable for all
ENTER VOLUME
Each time you press the key, the straight decode mode is sources.
RETURN DISPLAY
enabled or disabled. Uses the Dolby Pro Logic II decoder suitable for
bPLII Movie
TOP
MENU
POP-UP
MENU
MUTE movies.
CHARGE ENHANCER STEREO TUNED SLEEP MUTE
MODE
OUT VOL.
Uses the Dolby Pro Logic II decoder suitable for
ECO
ADAPTIVE DRC VIRTUAL bPLII Music
STRAIGHT music.
Uses the Dolby Pro Logic II decoder suitable for
bPLII Game
games.
• You can adjust the surround decoder parameters in “DSP Parameter” (p.45)
in the “Setup” menu.
TRANSMIT Enhancing the bass (Extra Bass) Enjoying compressed music with enhanced
SLEEP
RECEIVER
1
MOVIE MUSIC SUR. DECODE
SOUND
BASS ENHANCER STRAIGHT • You can also use “Extra Bass” (p.41) in the “Setup” menu to enable/disable
Press ENHANCER.
BASS
Extra Bass.
SCENE ENHANCER Each time you press the key, Compressed Music Enhancer
BD TV CD RADIO
DVD
is enabled or disabled.
SETUP OPTION
“ENHANCER” lights up
ENTER VOLUME
CHARGE ENHANCER STEREO TUNED SLEEP MUTE
OUT VOL.
RETURN DISPLAY ECO
ADAPTIVE DRC VIRTUAL
TOP
MENU
POP-UP
MENU
MUTE
Enhancer On
MODE
• Compressed Music Enhancer does not work on the following audio sources.
– Signals whose sampling rate is over 48 kHz
– High-definition streaming audio
• You can also use “Enhancer” (p.35) in the “Option” menu to enable/disable
Compressed Music Enhancer.
TRANSMIT
RECEIVER
Listening to FM radio
SLEEP
1 2 3
You can tune into a radio station by specifying its frequency or Selecting a frequency for reception
HDMI selecting from registered radio stations.
4
AUDIO
1
4
2
5
3
• The radio frequencies differ depending on the country or region where the unit is
1 Press FM to select “TUNER” as the input source.
being used. The explanation of this section uses a display with frequencies used “TUNER” is selected as the input source and then the
FM FM
TUNER in U.K. and Europe models. frequency currently selected is displayed.
MEMORY
PRESET TUNING TUNING • If you cannot obtain good reception on the radio, adjust the direction of the FM
INFO antenna. CHARGE ENHANCER STEREO TUNED SLEEP MUTE
OUT VOL.
ECO
MOVIE MUSIC SUR. DECODE ADAPTIVE DRC VIRTUAL
SOUND
BASS ENHANCER STRAIGHT
Setting the frequency steps FM 87.50MHz
SCENE
2
BD TV CD RADIO
DVD
SETUP OPTION
(Asia and General models only) Press TUNING repeatedly to set a frequency.
At the factory, the frequency step setting is set to 50 kHz for FM. Hold down the key for about a second to search stations
ENTER VOLUME Depending on your listening environment, set the frequency steps automatically.
RETURN DISPLAY to 100 kHz for FM.
CHARGE ENHANCER STEREO TUNED SLEEP MUTE
1
TOP POP-UP OUT VOL.
MENU MENU
MUTE MODE ECO
Set the unit to standby mode. ADAPTIVE DRC VIRTUAL
MODE FM 98.50MHz
2 When holding down STRAIGHT on the front panel, “TUNED” lights up when a signal is received from a radio
press z (power). station.
z (power) “STEREO” also lights up when a stereo signal is received.
• You can switch between “Stereo” (stereo) and “Mono” (monaural) for FM
radio reception by pressing MODE. When the signal reception for an FM
radio station is unstable, switching to monaural may improve it.
• You can watch videos input from external devices while listening to radio by
PROGRAM STRAIGHT selecting the video input jack in “Video Out” (p.36) in the “Option” menu.
TU••••••••FM50
4 Press STRAIGHT to select “FM100”.
TRANSMIT Registering favorite radio stations (presets) ■ Registering a radio station manually
SLEEP
RECEIVER
Select a radio station manually and register it to a preset number.
You can register up to 40 radio stations as presets. Once you have
HDMI
1
4
2 3
registered stations, you can easily tune into them by selecting their
preset numbers. 1 Follow “Selecting a frequency for reception” (p.31)
to tune into the desired radio station.
■ Registering radio stations automatically
1 2 3
AUDIO
4
FM
5
FM
(Auto Preset) 2 Hold down MEMORY for more than 2 seconds.
TUNER The first time that you do register a station, the selected
MEMORY Automatically register FM radio stations with strong signals (up to
PRESET TUNING MEMORY
40 stations). radio station will be registered to the preset number “01”.
INFO
PRESET Thereafter, each radio station you select will be registered
MOVIE MUSIC SUR. DECODE
SOUND
BASS ENHANCER STRAIGHT 1 Press FM to select “TUNER” as the input source. to the next empty (unused) preset number after the most
recently registered number.
2
SCENE
BD
DVD TV CD RADIO Press OPTION. CHARGE ENHANCER STEREO TUNED SLEEP MUTE
SETUP OPTION
OPTION OUT VOL.
3
ECO
ADAPTIVE DRC VIRTUAL
TOP
MENU
POP-UP
MENU
MUTE
Auto Preset
MODE
• To select a preset number for registering, press MEMORY once after tuning
01:FM 87.50MHz
Preset number from which to start the registration
• To specify the preset number from which to start the registration, press
PRESET or cursor keys (q/w) to select a preset number within 5 seconds
after step 4 (while “READY” is displayed) and then press ENTER (or just
wait for 5 seconds).
• To cancel the Auto Preset process, press RETURN.
When the Auto Preset process finishes, “FINISH” appears and the
“Option” menu closes automatically.
CHARGE ENHANCER STEREO TUNED SLEEP MUTE
OUT VOL.
ECO
ADAPTIVE DRC VIRTUAL
Auto Preset
PLAYBACK ➤ Listening to FM radio En 32
00_HTR-2067_om_En.book Page 33 Monday, January 27, 2014 9:33 AM
TRANSMIT
■ Selecting a preset station ■ Clearing preset stations
SLEEP
RECEIVER
Tune into a registered radio station by selecting its preset number. Clear radio stations registered to the preset numbers.
HDMI
1
4
2 3
1 Press FM to select “TUNER” as the input source. 1 Press FM to select “TUNER” as the input source.
AUDIO
1 2 3
2 Press PRESET repeatedly to select the desired radio 2 Press OPTION.
4 5
station.
TUNER
FM FM
CHARGE ENHANCER STEREO TUNED SLEEP MUTE
3 Use the cursor keys to select “Clear Preset” and
MEMORY
PRESET TUNING PRESET
OUT
ECO
VOL. press ENTER.
ADAPTIVE DRC VIRTUAL
INFO
VOL.
ECO
SOUND ADAPTIVE DRC VIRTUAL
BASS
SCENE
ENHANCER STRAIGHT
Clear Preset
BD
DVD TV CD RADIO • “No Presets” appears when no radio stations are registered.
SETUP OPTION
OPTION
4 Use the cursor keys (q/w) to select a preset station
ENTER VOLUME Cursor keys to be cleared and press ENTER.
RETURN DISPLAY ENTER
CHARGE ENHANCER STEREO TUNED SLEEP MUTE
OUT VOL.
TOP POP-UP MUTE ECO
MENU MENU ADAPTIVE DRC VIRTUAL
01:Cleared
5 Repeat step 4 until all desired preset stations are
cleared.
1 Press OPTION. • Available items vary depending on the selected input source.
• Text in parentheses denotes indicators on the front display.
CHARGE ENHANCER STEREO TUNED SLEEP MUTE
OUT VOL.
• Default settings are underlined.
ECO
ADAPTIVE DRC VIRTUAL
DSP Level
Adjusts the sound field effect level. 35
(DSP Level)
Option
Sets whether the dynamic range (from maximum to
Tone Control DSP/Surround Adaptive DRC
minimum) is automatically adjusted when the volume 35
DSP/Surround (DSP/Surround) (A.DRC)
Volume Trim is adjusted.
Lipsync
Signal Info Enhancer
Audio In Enables/disables Compressed Music Enhancer. 35
(Enhancer)
Input Trim
Corrects volume differences between input sources. 35
Volume Trim (In.Trim)
TV screen (Volume Trim) Subwoofer Trim
Fine-adjusts the subwoofer volume during playback. 35
(SW.Trim)
2 Use the cursor keys to select an item and press ENTER. Lipsync (Lipsync)
Enables/disables the “Lipsync” setting in the “Setup”
menu.
36
Signal Info (Signal Info) Displays information about the video/audio signal. 36
• To return to the previous screen during menu operations, press RETURN.
Combines the video jack of the selected input
Audio In (Audio In) 36
source with an audio jack of others.
3 Use the cursor keys (e/r) to select a setting.
Video Out (Video Out) Selects a video to be output with radio sounds. 36
4 To exit from the menu, press OPTION. Auto Preset (Auto Preset)
Automatically registers FM radio stations with strong
signals as presets.
32
Clear Preset (Clear Preset) Clear radio stations registered to preset numbers. 33
PLAYBACK ➤ Configuring playback settings for different playback sources (Option menu) En 34
00_HTR-2067_om_En.book Page 35 Monday, January 27, 2014 9:33 AM
• You can also adjust the tone with the front panel controls. Press TONE CONTROL to select "Treble" or Off (Off) Disables Compressed Music Enhancer.
"Bass", then press PROGRAM to make an adjustment.
On (On) Enables Compressed Music Enhancer.
Default
• If you set an extreme value, sounds may not match those from other channels.
TUNER: On (On)
Others: Off (Off)
■ DSP/Surround (DSP/Surround)
Configures the sound field program and surround settings. ■ Volume Trim (Volume Trim)
Fine-adjusts volume difference between input sources or subwoofer volume.
❑ DSP Level (DSP Level)
Adjusts the sound field effect level. ❑ Input Trim (In.Trim)
Setting range Corrects volume differences between input sources. If you are bothered by volume
-6 dB to 0 dB to +3 dB (1 dB increments) differences when switching between input sources, use this function to correct it.
Output level
On
On
Off Off
PLAYBACK ➤ Configuring playback settings for different playback sources (Option menu) En 35
00_HTR-2067_om_En.book Page 36 Monday, January 27, 2014 9:33 AM
Bitrate (B RATE) The amount of data per second of the input bitstream signal
Video In (V IN) Type and resolution of the input digital signal
■ Video Out (Video Out)
Video Out (V OUT) Type and resolution of the output digital signal
Selects a video to be output with the selected audio source. For example, you can
watch the video while listening to the radio.
Input sources
AUDIO 1–5, TUNER
• To switch the information on the front display, press the cursor keys (q/w) repeatedly.
Settings
PLAYBACK ➤ Configuring playback settings for different playback sources (Option menu) En 36
00_HTR-2067_om_En.book Page 37 Monday, January 27, 2014 9:33 AM
CONFIGURATIONS
Configuring various functions (Setup menu)
You can configure the unit’s various function with the menu displayed on the TV screen.
4 Use the cursor keys (e/r) to select a setting and press ENTER.
• Operations with TV screen are available only when your TV is connected to the unit via HDMI. If not, carry
out operations while viewing the front display.
5 To exit from the menu, press SETUP.
1 Press SETUP.
Setup
Speaker Configuration
HDMI Distance
Sound Level
ECO Equalizer
Function Test Tone
Language
Setup
Speaker Configuration
HDMI Distance
Sound Level
ECO Equalizer
Function Test Tone
Language
Center Selects whether or not a center speaker is connected and its size. 40
Surround Selects whether or not surround speakers are connected and their size. 40
Configuration
Crossover Sets the lower limit of the low-frequency component that can be output from speakers whose size is set to “Small”. 40
Virtual CINEMA FRONT Selects whether to use the front 5-channel speaker (Virtual CINEMA FRONT) configuration. 41
Distance Sets the distance between each speaker and listening position. 41
TV Audio Input Selects an audio input jack of the unit to be used for TV audio input. 43
HDMI Configuration
Standby Sync Selects whether to use HDMI control to link the standby behavior of the TV and the unit. 43
DSP Parameter Center Width Adjusts the broadening effect of the center sound field. 45
Dimension Adjusts the difference in level between the front and surround sound fields. 45
Select Selects the method to adjust the delay between video and audio output. 45
Lipsync
Sound Adjustment Adjusts the delay between video and audio output manually. 45
Dynamic Range Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback. 46
Volume
Max Volume Sets the maximum volume to prevent excessive loudness. 46
Initial Volume Sets the initial volume for when this receiver is turned on. 46
Auto Power Standby Set the amount of time for the auto-standby function. 47
ECO
ECO Mode Enables/disables the eco mode (power saving mode). 47
Input Rename Changes the input source name displayed on the front display. 48
Speaker
Configures the speaker settings manually.
Center
Selects whether or not a center speaker is connected and its size.
• Default settings are underlined.
Settings
• If the volume and crossover frequency are adjustable on your subwoofer, set the volume to half and
crossover frequency to maximum.
Subwoofer Phase
■ Distance
Sets the distance between each speaker and listening position so that sounds from the
Sets the phase of the subwoofer. When the bass sound is lacking or unclear, speakers reach the listening position at the same time. First, select the unit of distance
switch the subwoofer phase. from “Meter” or “Feet”.
Settings Choices
Normal Does not reverse the subwoofer phase. Front L, Front R, Center, Surround L, Surround R, Subwoofer
Setting range
Reverse Reverses the subwoofer phase.
0.30 m to 24.00 m (1.0 ft to 80.0 ft), 0.05 m (0.2 ft) increments
Default
Extra Bass Front L, Front R, Subwoofer: 3.00 m (10.0 ft)
Center: 2.60 m (8.6 ft)
Enables/disables Extra Bass. When Extra Bass is enabled, you can enjoy
Surround L, Surround R: 2.40 m (8.0 ft)
enhanced bass sounds, regardless of the size of the front speakers and the
presence or absence of the subwoofer.
Settings
■ Level
Adjusts the volume of each speaker.
Off Disables Extra Bass.
Choices
On Enables Extra Bass.
Front L, Front R, Center, Surround L, Surround R, Subwoofer
Setting range
-10.0 dB to +10.0 dB (0.5 dB increments)
• You can also use BASS on the remote control to enable/disable Extra Bass (p.30).
Default
Front L, Front R, Subwoofer: 0.0 dB
Virtual CINEMA FRONT
Others: -1.0 dB
Selects whether to use the front 5-channel speaker (Virtual CINEMA FRONT)
configuration.
■ Equalizer
Settings
Adjusts the tone with an equalizer.
Off Disables the front 5-channel speaker configuration.
EQ Select
On Enables the front 5-channel speaker configuration.
Selects the type of equalizer to be used.
Settings
• Select "On" only when utilizing the Virtual CINEMA FRONT configuration (p.13).
Select this option when you want to adjust the equalizer manually.
• This setting is not available when “Surround” is set to “None”. GEQ
For details, see “Manual equalizer adjustment”.
Off Does not use the equalizer.
2 Use the cursor keys (q/w) to select “Channel” and the cursor keys (e/r) to select
the desired speaker channel.
3 Use the cursor keys (q/w) to select the desired band (frequency) and the cursor
keys (e/r) to adjust the gain.
Setting range
-6.0 dB to +6.0 dB
Equalizer
EQ Select GEQ
GEQ Edit
Channel Front L
63Hz
160Hz
400Hz
1kHz
2.5kHz
6.3kHz
16kHz
Back:RETURN
■ Test Tone
Enables/disables the test tone output. Test tone output helps you to adjust the speaker
balance or equalizer while confirming its effect.
Settings
HDMI
Configures the HDMI settings.
TV Audio Input
Selects an audio input jack of the unit to be used for TV audio input when “HDMI
• Default settings are underlined.
Control” is set to “On”. The unit’s input source automatically switches to TV audio
when the TV input is switched to its built-in tuner.
■ Configuration Settings
AUDIO 1–5
HDMI Control Default
Enables/disables HDMI Control (p.59). AUDIO 4
Settings
Off Disables HDMI Control. • When using ARC to input TV audio to the unit, you cannot use the input jacks selected here for
connecting an external device because the input will be used for TV audio input.
Enables HDMI Control.
On Configure the settings in “TV Audio Input”, “Standby Sync”, “ARC”,
and “SCENE”.
Standby Sync
Select whether to use HDMI control to link the standby behavior of the TV and the
unit when “HDMI Control” is set to “On”.
• To use HDMI control, you need to perform the HDMI Control link setup (p.59) after connecting HDMI Settings
Control-compatible devices.
Off Does not set the unit to standby mode when the TV is turned off.
Audio Output On Sets the unit to standby mode when the TV is turned off.
Selects a device to output audio. Sets the unit to standby mode when the TV is turned off only when the
Auto
unit is receiving TV audio or HDMI signals.
• This setting is available only when “HDMI Control” is set to “Off”. ARC
Amp Enables/disables ARC (p.17) when “HDMI Control” is set to “On”.
Enables/disables the audio output from the speakers connected to the unit.
Settings
Settings
Off Disables ARC.
Off Disables the audio output from the speakers.
On Enables ARC.
On Enables the audio output from the speakers.
SCENE
Enables/disable SCENE link playback when “HDMI Control” is set to “On”.
When SCENE link playback is enabled, HDMI Control-compatible devices
connected to the unit via HDMI automatically works as follows, with a scene
selection.
• TV: turning on and displaying video from the playback device
• Playback device: starting playback
Choices (SCENE keys)
BD/DVD, TV, CD, RADIO
Settings
Off Disables SCENE link playback for the selected SCENE key.
On Enables SCENE link playback for the selected SCENE key.
Default
BD/DVD, TV: On
CD, RADIO: Off
• SCENE link playback may not work properly due to the compatibility between devices. We
recommend using TV and playback devices from the same manufacturer so that HDMI Control works
more effectively.
Sound
Configures the audio output settings. ■ Lipsync
Adjusts the delay between video and audio output.
• Default settings are underlined.
• You can enable/disable the Lipsync function by input sources in “Lipsync” (p.36) in the “Option” menu.
■ DSP Parameter
Configures the surround decoder settings. Select
Selects the method to adjust the delay between video and audio output.
Panorama
Setting range
Enables/disables the broadening effect of the front sound field. When this function
is enabled, you can wrap front right/left channel sounds around the field and Select this option when you want to adjust the delay between video
Manual and audio output manually.
generate a spacious sound field in combination with the surround sound field. This
Adjust the audio output timing in “Adjustment”.
setting is effective when “bPLII Music” is selected.
Adjusts the delay between video and audio output automatically when
Settings a TV that supports an automatic lipsync function is connected to the
Auto unit via HDMI.
Off Disables the broadening effect of the front sound field. If necessary, you can fine-adjust the audio output timing in
On Enables the broadening effect of the front sound field. “Adjustment”.
Center Width
• “Select” is automatically set to “Manual” depending on the TV connected to the unit.
Adjusts the broadening effect of the center sound field. Higher to enhance the
broadening effect, and lower to reduce it (closer to center). This setting is effective Adjustment
when “bPLII Music” is selected.
Adjusts the delay between video and audio output manually when “Select” is set to
Setting range “Manual”. You can fine-adjust the audio output timing when “Select” is set to
0 to 3 to 7 “Auto”.
■ Volume
Configures the volume settings.
Scale
Switches the scale of the volume display.
Settings
Dynamic Range
Selects the dynamic range adjustment method for bitstream audio (Dolby Digital
and DTS signals) playback.
Settings
Max Volume
Sets the maximum volume to prevent excessive loudness.
Setting range
-30.0 dB to +15.0 dB (5.0 dB increments), +16.5 dB
[50.0 to 95.0 (5.0 increments), 97.0]
Initial Volume
Sets the initial volume when the receiver is turned on.
Settings
Sets the level to the volume level of the unit when it last entered
Off
standby mode.
Mute Sets the unit to mute the audio output.
-80.0 dB to +16.5 dB
(0.5 dB increments)
Sets the level to the specified volume level.
[0.5 to 97.0
(0.5 increments)]
ECO
Configures the power supply settings.
Default
U.K. and Europe models: 20 minutes
Other models: Off
• Just before the unit enters standby mode, “AutoPowerStdby” appears and then countdown starts in
the front display.
■ ECO Mode
Enables/disables the eco (power saving) mode.
When the eco mode is enabled, you can reduce the unit’s power consumption by
keeping the maximum volume, maximum output power, or front display’s brightness
low.
Settings
• Be sure to press ENTER to restart the unit after selecting a setting. The new setting will take effect
after the unit is restarted.
Function
Configures the functions that make the unit easier to use. ■ Dimmer
Adjusts the brightness of the front display.
• Default settings are underlined. Setting range
-4 to 0 (higher to brighten)
■ Input Rename
Changes the input source name displayed on the front display. • The front display may become dark when “ECO Mode” (p.47) is set to “On”.
Input sources
HDMI 1–4, AUDIO 1–5 ■ Memory Guard
Prevents accidental changes to the settings.
■ Procedure
Settings
1 Use the cursor keys (q/w) to select an input source to be renamed and press
Off Does not protect the settings.
ENTER.
On Protects the settings until “Off” is selected.
• To select a name from the presets, use the cursor keys (q/w) to select an input source and the
cursor keys (e/r) to select a preset name.
• When “Memory Guard” is set to “On”, the following icon ( ) is displayed on the menu screen.
2 Use the cursor keys (e/r) to move the edit position and the cursor keys (q/w) to
select a character.
Memory Guard
Icon
Memory Guard On
Input Rename
HDMI1
B l u - r a y
OK:ENTER
CANCEL:RETURN
Back:RETURN
Language
Select an on-screen menu language.
English English
日本語 Japanese
Français French
Deutsch German
Español Spanish
Russian
Italiano Italian
Chinese
• Japanese and Chinese characters used in content information (such as song titles) cannot be
displayed.
• The information on the front display is provided in English only.
2 While holding down STRAIGHT on the front panel, press z (power). • Default settings are underlined.
4 Press STRAIGHT to select a setting. Selecting the remote control ID (REMOTE ID)
5 Press z (power) to set the unit to standby mode and turn it on again. CHARGE
OUT
ECO
ENHANCER STEREO TUNED SLEEP MUTE
VOL.
ADAPTIVE DRC VIRTUAL
1 To select ID1, hold down the cursor key (e) and SCENE (BD/DVD) together for 3
seconds.
To select ID2, hold down the cursor key (e) and SCENE (TV) together for 3
seconds.
Changing the FM tuning frequency setting (TU) Restoring the default settings (INIT)
(Asia and General models only) CHARGE ENHANCER STEREO TUNED SLEEP MUTE
OUT VOL.
ECO
ADAPTIVE DRC VIRTUAL
INIT••••CANCEL
CHARGE ENHANCER STEREO TUNED SLEEP MUTE
OUT VOL.
ECO
ADAPTIVE DRC VIRTUAL
FM50
Select this when you want to adjust the FM frequency by 50-kHz Checking the firmware version (VERSION)
steps.
VERSION••xx.xx
CHARGE ENHANCER STEREO TUNED SLEEP MUTE
Check the version of firmware currently installed on the unit.
OUT VOL.
ECO
ADAPTIVE DRC VIRTUAL
TV FORMAT•NTSC
Switch the video signal type of HDMI output so that it matches to the format of your TV.
Since the unit automatically selects the video signal type so that it matches to the TV, it
is unnecessary to change the setting normally. Change the setting only when images
on the TV screen do not appear correctly.
Settings
NTSC, PAL
Default
Canada and General models: NTSC
Other models: PAL
APPENDIX
Frequently asked questions
The new speaker system does not provide an ideal sound I made HDMI connections but HDMI Control does not work at
balance... all...
If you have changed speakers or have a new speaker system, reconfigure the speaker To use HDMI Control, you need to perform the HDMI Control link setup (p.59). After
settings in “Speaker” in the “SETUP” menu. connecting HDMI Control-compatible devices (such as BD/DVD players) to the unit,
enable HDMI Control on each device and perform the HDMI Control link setup. This
setup is required every time you add a new HDMI Control-compatible device to your
Since we have small children, we want to set limitations on the system. For information on how HDMI Control works between your TV and playback
volume control... devices, refer to the instruction manuals for each device.
If a small child accidentally operates the controls on the main unit or remote control, the
volume may suddenly increase. This may also cause injury or damage the unit or
I want to display a device name or a manufacture name on the
speakers. We recommend using “Max Volume” in the “Setup” menu to set the maximum
volume level for the unit in advance (p.46). front display when selecting an input source...
By default, input source names (such as “HDMI 1” and “AUDIO 1”) are displayed on
the front display when an input source is selected. If you want to rename them as you
I am occasionally startled by a sudden loud sound when turning like, use “Input Rename” (p.48) in the “Setup” menu. You can also select a name from
on the unit... the presets (such as “Blu-ray” and “DVD”).
By default, the volume level when the unit last entered standby mode is automatically
applied. If you want to fix the volume, use “Initial Volume” in the “Setup” menu to set the
I want to prevent accidental changes to the settings...
volume to be applied when the receiver is turned on (p.46).
You can protect the settings configured on the unit (such as speaker settings) by
utilizing “Memory Guard” in the “Setup” menu (p.48).
We are bothered by volume differences when switching
between input sources… The unit’s remote control is simultaneously controlling another
You can correct volume differences between input sources by utilizing “Input Trim” in
Yamaha product as well as the unit...
the “Option” menu (p.35).
When using multiple Yamaha products, the remote control may work on another
Yamaha product or another remote control may work on the unit. If this happens,
register different remote control IDs for the devices that you want to control with each
remote control (p.50).
Troubleshooting
Refer to the table below when the unit does not function properly.
If the problem you are experiencing is not listed below or if the instructions below do not help, turn off the unit, disconnect the power cable, and contact the nearest authorized
Yamaha dealer or service center.
APPENDIX ➤ Troubleshooting En 53
00_HTR-2067_om_En.book Page 54 Monday, January 27, 2014 9:33 AM
Audio
Problem Cause Remedy
Another input source is selected. Select an appropriate input source with the input selection keys.
Some digital audio formats cannot be played back on the unit. To check the audio
No sound. Signals that the unit cannot reproduce are being input.
format of the input signal, use “Signal Info” in the “Option” menu (p.36).
The cable connecting the unit and playback device is defective. If there is no problem with the connection, replace with another cable.
The maximum volume is set. Use “Max Volume” in the “Setup” menu to adjust the maximum volume (p.46).
The volume cannot be increased.
A device connected to the output jacks of the unit is not turned on. Turn on all devices connected to the output jacks of the unit.
The playback source does not contain a signal for the channel. To check it, use “Signal Info” in the “Option” menu (p.36).
The currently selected sound program/decoder does not use the
To check it, select “5ch Stereo” (p.26).
speaker.
Audio output of the speaker is disabled. Use “Configuration” in the “Setup” menu to change the speaker settings (p.40).
No sound is coming from a specific speaker. The volume of the speaker is set too low. Use “Level” in the “Setup” menu to adjust the speaker volume (p.41).
The speaker cable connecting the unit and the speaker is
If there is no problem with the connection, replace with another speaker cable.
defective.
To check it, replace with another speaker. If the problem persists, the unit may be
The speaker is malfunctioning.
malfunctioning.
The playback source does not contain LFE or low-frequency To check it, set “Extra Bass” in the “Setup” menu to “On”, in order to output the
signals. front channel low-frequency components from the subwoofer (p.41).
Subwoofer output is disabled. Set “Subwoofer” in the “Setup” menu to “Use” (p.40).
No sound is coming from the subwoofer. (When using a subwoofer with built-in amplifier)
Adjust the volume on the subwoofer.
The volume of the subwoofer is too low.
(When using a subwoofer with built-in amplifier)
Disable the auto-standby function of the subwoofer or adjust its sensitivity level.
The subwoofer has been turned off by its auto-standby function.
The TV does not support HDCP (High-bandwidth Digital Content
Refer to the instruction manuals for the TV and check the TV’s specifications.
Protection).
No sound from the playback device (connected to The unit is set not to output audio input through HDMI jacks from
In “Audio Output” in the “Setup” menu, set “Amp” to “On” (p.43).
the unit with HDMI). the SPEAKERS terminals.
The number of devices connected to the HDMI OUT jack exceeds
Disconnect some of the HDMI devices.
the limit.
Change the audio output setting on your TV so that the TV audio is output from the
The TV is set to output audio from the TV speakers.
speakers connected to the unit.
A TV that does not support ARC is connected to the unit only with
Use a digital optical cable to make an audio connection (p.17).
No sound from the TV (when HDMI Control is an HDMI cable.
used). (If the TV is connected to the unit with an audio cable) Use “TV Audio Input” in the “Setup” menu to select the correct audio input jack
The TV audio input setting does not match the actual connection. (p.43).
(If you are trying to use ARC)
Set “ARC” in the “Setup” menu to “On” (p.43). Also, enable ARC on the TV.
ARC is disabled on the unit or TV.
APPENDIX ➤ Troubleshooting En 54
00_HTR-2067_om_En.book Page 55 Monday, January 27, 2014 9:33 AM
Video
Problem Cause Remedy
Another input source is selected on the unit. Select an appropriate input source with the input selection keys.
Another input source is selected on the TV. Switch the TV input to display the video from the unit.
No video. Check the video output setting of the playback device. For information about
The video signal output from the unit is not supported by the TV.
video signals supported by the TV, refer to the instruction manuals for the TV.
The cable connecting the unit and TV (or playback device) is
If there is no problem with the connection, replace with another cable.
defective.
To check the information about the current video signal (resolution), use “Signal
The input video signal (resolution) is not supported by the unit. Info” in the “Option” menu (p.36). For information about video signals supported
by the unit, see “HDMI signal compatibility” (p.61).
No video from the playback device (connected to
The TV does not support HDCP (High-bandwidth Digital Content
the unit with HDMI). Refer to the instruction manuals for the TV and check the TV’s specifications.
Protection).
The number of devices connected to the HDMI OUT jack is over
Disconnect some of the HDMI devices.
the limit.
The menu of the unit is not displayed on the TV. Another input source is selected on the TV. Switch the TV input to display the video from the unit (HDMI OUT jack).
APPENDIX ➤ Troubleshooting En 55
00_HTR-2067_om_En.book Page 56 Monday, January 27, 2014 9:33 AM
FM radio
Problem Cause Remedy
There is multi-path interference. Adjust the FM antenna height or orientation, or place it in a different location.
Press MODE to select monaural FM radio reception (p.31).
FM radio reception is weak or noisy.
Your area is too far from the FM station transmitter. Use an outdoor FM antenna. We recommend using a sensitive multi-element
antenna.
Select the station manually (p.31).
Radio stations cannot be selected automatically. Your area is too far from the FM station transmitter. Use an outdoor antenna. We recommend using a sensitive multi-element
antenna.
APPENDIX ➤ Troubleshooting En 56
00_HTR-2067_om_En.book Page 57 Monday, January 27, 2014 9:33 AM
Glossary
■ Audio decoding format This channel reproduces low-frequency bass signals and has a frequency range from 20 Hz to 120 Hz. This
channel is added to the channels for all bands with Dolby Digital or DTS to enhance low frequency audio
Dolby Digital effects. This channel is labeled 0.1 because it is limited to only low frequency audio.
Dolby Digital is a compressed digital audio format developed by Dolby Laboratories, Inc. that supports Lip sync
5.1-channel audio. This technology is used for audio on most DVD discs. Video output sometimes lags behind audio output due to the complexity of signal processing caused by an
Dolby Digital Plus increase in video signal capacity. Lip sync is a technique for automatically correcting the timing lag
between audio and video output.
Dolby Digital Plus is a compressed digital audio format developed by Dolby Laboratories, Inc. that supports
7.1-channel audio. Dolby Digital Plus remains fully compatible with the existing multichannel audio systems
that support Dolby Digital. This technology is used for audio on BD (Blu-ray discs).
x.v.Color
“x.v.Color” is a technology that the HDMI specification supports. It is a more extensive color space than
sRGB and allows the expression of colors that were not hitherto possible. While remaining compatible with
the color gamut of sRGB standards, “x.v.Color” expands the color space, and thus can produce more vivid,
natural images.
APPENDIX ➤ Glossary En 58
00_HTR-2067_om_En.book Page 59 Monday, January 27, 2014 9:33 AM
To use HDMI Control, you need to perform the following HDMI Control link setup after f If you made a digital optical cable connection between the TV and the unit, use the
connecting the TV and playback devices. cursor keys (q/w) to select “TV Audio Input” and the cursor keys (e/r) to select
For details on settings and operating your TV, refer to the instruction manual for the TV. “AUDIO 1”.
g Press SETUP.
• This setup is required every time you add a new HDMI Control-compatible device to your system. 3 Enable HDMI Control on the TV and playback devices (such as HDMI
Control-compatible BD/DVD players).
1 Turn on the unit, TV, and playback devices.
4 Turn off the main power of the TV and then turn off the unit and
2 Configure the settings of the unit. playback devices.
a Switch the TV input to display video from the unit.
b Press SETUP. 5 Turn on the unit and playback devices and then turn on the TV.
TV CD RADIO
6
DVD
SETUP OPTION SETUP Switch the TV input to display the video from the unit.
RETURN
ENTER
DISPLAY
VOLUME Cursor keys
ENTER
7 Check the followings.
On the unit: The input to which the playback device is connected is selected.
TOP POP-UP
MENU MENU
MUTE
If not, select the input source manually.
c Use the cursor keys to select “HDMI” and press ENTER. On the TV: The video from the playback device is displayed.
Setup 8 Check that the unit is properly synchronized with the TV by turning
Speaker Configuration
off the TV or adjusting the TV volume with the TV remote control.
HDMI
Sound
ECO
Function • If HDMI Control does not work properly, try unplugging the TV in Step 2 and plugging in the TV again in
Language
Step 3. It may solve the problem. Also, HDMI Control may not work if the number of connected devices
exceeds the limit. In this case, disable HDMI Control on the devices not in use.
• If the unit is not synchronized to the TV’s power operations, check the priority of the audio output setting on
the TV.
d Press ENTER again. • We recommend using TV and playback devices from the same manufacturer so that HDMI Control works
more effectively.
e Use the cursor keys (q/w) to select “HDMI Control” and the cursor keys (e/r) to
select “On” as shown below.
Configuration
HDMI Control On
Audio Output
TV Audio Input AUDIO 4
Standby Sync Auto
ARC On
SCENE
Back: RETURN
– The HDMI cable is connected to the ARC-compatible HDMI jack (HDMI jack Video signals
marked “ARC”) on the TV.
The unit is compatible with the video signals of the following resolutions:
Some HDMI jack on the TV is not compatible with ARC. For details, refer to the
instruction manual for the TV. • 480i/60 Hz • 720p/60 Hz, 50 Hz
• 576i/50 Hz • 1080i/60 Hz, 50 Hz
• If the audio is interrupted while using ARC, set “ARC” (p.43) in the “Setup” menu to “Off” and use a digital • 480p/60 Hz • 1080p/60 Hz, 50 Hz, 24 Hz
optical cable to input TV audio to the unit (p.17).
• 576p/50 Hz • 4K/30 Hz, 25 Hz, 24 Hz
• When using ARC, connect a TV with an HDMI cable that supports ARC.
• “AUDIO 4” is set as TV audio input at the factory. If you have connected any external device to the AUDIO 4 • When CPPM copy-protected DVD-Audio is played back, video/audio signals may not be output, depending
jacks, use “TV Audio Input” (p.43) in the “Setup” menu to change the TV audio input assignment. To use the on the type of the DVD player.
SCENE function (p.25), you also need to change the input assignment for SCENE (TV).
• The unit is not compatible with HDCP-incompatible HDMI or DVI devices. For details, refer to the instruction
manual for each device.
• To decode audio bitstream signals on the unit, set the input source device appropriately so that the device
outputs the bitstream audio signals directly (does not decode the bitstream signals on the playback device).
For details, refer to the instruction manual for the playback device.
ARC
ANTENNA
(BD/DVD)
HDMI OUT
HDMI 1 HDMI 2 HDMI 3 HDMI 4
FM
SPEAKERS
FRONT
• The area around the video/audio output jacks is marked in white on the actual product to prevent improper connections.
Trademarks
Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and
worldwide patents issued & pending. DTS, the Symbol, & DTS and the Symbol together are registered
trademarks & DTS Digital Surround and the DTS logos are trademarks of DTS, Inc. Product includes
software.
© DTS, Inc. All Rights Reserved.
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other countries.
x.v.Color™
“x.v.Color” is a trademark of Sony Corporation.
APPENDIX ➤ Trademarks En 63
00_HTR-2067_om_En.book Page 64 Monday, January 27, 2014 9:33 AM
Specifications
Input jacks • Audio Format Audio Section
- Dolby Digital Plus
• Analog Audio • Rated Output Power (2-channel driven)
- Dolby Digital
Audio x 2 (AUDIO 4–5) (20 Hz to 20 kHz, 0.09% THD, 6 Ω)
- DTS
• Digital Audio (Supported frequencies: 32 kHz to 96 kHz) Front L/R................................................................. 70 W+70 W
- DSD 2-ch to 6-ch
Optical x 1 (AUDIO 1) [Canada model]
- PCM 2-ch to 8-ch (Max. 192 kHz/24-bit)
Coaxial x 2 (AUDIO 2–3) (1 kHz, 0.9% THD, 6 Ω)
• Content Protection: HDCP compatible Front L/R................................................................. 85 W+85 W
• HDMI Input
• Link Function: CEC supported Center ............................................................................... 85 W
HDMI x 4 (HDMI 1–4)
Surround L/R .......................................................... 85 W+85 W
Output jacks TUNER (50Hz, 0.9% THD, 6 Ω)
• Analog Tuner Subwoofer ......................................................................... 85 W
• Analog Audio
FM x 1 (TUNER)
Speaker out x 6 (FRONT L/R, CENTER, SURROUND L/R, • Rated Output Power (1-channel driven)
SUBWOOFER) Compatible Decoding Formats (1 kHz, 0.9% THD, 6 Ω)
Subwoofer out x 1 (SUBWOOFER PRE OUT) Front L/R..................................................................... 100 W/ch
• Decoding Format
Headphone x 1 (PHONES) Center ........................................................................ 100 W/ch
- Dolby Digital Plus
• HDMI Output Surround L/R .............................................................. 100 W/ch
- Dolby Digital
HDMI OUT x 1 (50Hz, 0.9% THD, 6 Ω)
- DTS
Subwoofer ....................................................................... 100 W
HDMI • Post Decoding Format
• Maximum Effective Output Power (1-channel driven)
- Dolby Pro Logic
• HDMI Features: Deep Color, “x.v.Color,” Auto Lip Sync, ARC (JEITA, 1 kHz, 10% THD, 6 Ω)
- Dolby Pro Logic II Music, Dolby Pro Logic II Movie,
(Audio Return Channel), 3D, 4K Ultra HD [Asia and General models]
Dolby Pro Logic II Game
• Video Format (Repeater Mode) Front L/R..................................................................... 135 W/ch
- VGA Center ........................................................................ 135 W/ch
- 480i/60 Hz Surround L/R .............................................................. 135 W/ch
- 576i/50 Hz (JEITA, 50Hz, 10% THD, 6 Ω)
- 480p/60 Hz Subwoofer .................................................................. 135 W/ch
- 576p/50 Hz • Dynamic Power (1-channel driven) (IHF)
- 720p/60 Hz, 50 Hz [Canada model]
- 1080i/60 Hz, 50 Hz Front L/R (8/6/4/2 Ω) .................................. 110/130/160/180 W
- 1080p/60 Hz, 50 Hz, 24 Hz [Other models]
- 4K/30 Hz, 25 Hz, 24 Hz Front L/R (6/4/2 Ω) ............................................ 110/130/150 W
APPENDIX ➤ Specifications En 64
00_HTR-2067_om_En.book Page 65 Monday, January 27, 2014 9:33 AM
• 50 dB Quiet Sensitivity (IHF, 1 kHz, 100% MOD.) [U.K. and Europe models] .............................. AC 230 V, 50 Hz
• Signal to Noise Ratio (IHF-A Network)
Mono .................................................................2 µV (17.3 dBf) [Asia model].................................... AC 220 to 240 V, 50/60 Hz
AUDIO 4 etc. (Input 1 kΩ Shorted, Speaker Out)
..........................................................................110 dB or more • Signal to Noise Ratio (IHF) • Power Consumption........................................................ 260 W
• Filter Characteristics
(fc=40/60/80/90/100/110/120/160/200 Hz)
H.P.F. (Front, Center, Surround) ................................ 12 dB/oct.
L.P.F. (Subwoofer)..................................................... 24 dB/oct.
APPENDIX ➤ Specifications En 65
00_HTR-2067_om_En.book Page 66 Monday, January 27, 2014 9:33 AM
Index
Symbols Bitrate (Signal Info, Option menu) 36 Enhancer (DSP/Surround, Option menu) 35
Lock icon (o) 48 Bitstream 61 ENHANCER (sound mode) 30
EQ Select (Equalizer, Setup menu) 41
Numerics C Equalizer (Speaker, Setup menu) 41
2.1-channel system 13 Cellar Club (sound program) 28
Error indication (front display) 57
2ch Stereo (sound program) 28 Center (Speaker, Setup menu) 40
Extra Bass (Speaker, Setup menu) 41
3.1-channel system 13 Center Width (DSP Parameter, Setup menu) 45
4.1-channel system 13 Chamber (sound program) 28 F
4K Ultra HD 61 CHAN (Signal Info, Option menu) 36 Firmware version check 51
5.1-channel system 13, 14 Channel (Signal Info, Option menu) 36 FM radio listening 31
5.1-channel system (Virtual CINEMA FRONT) 13 Check SP Wires (error indication) 57 FM radio tuning 31
5ch Stereo (sound program) 28 CINEMA DSP 27 FORMAT (Signal Info, Option menu) 36
Clear Preset (FM radio, Option menu) 33 Format (Signal Info, Option menu) 36
A Compressed Music Enhancer 30 Frequency (FM radio) 31
A.DRC (DSP/Surround, Option menu) 35 Configuration (HDMI, Setup menu) 43 Frequency step setting 31, 51
Action Game (sound program) 27 Configuration (Speaker, Setup menu) 40 Front (Speaker, Setup menu) 40
Adaptive DRC (DSP/Surround, Option menu) 35 Crossover (Speaker, Setup Menu) 40 Front display (part names and functions) 8
Adjustment (Lipsync, Setup menu) 45 Crossover frequency setting (subwoofer) 40 Front display brightness 48
ADVANCED SETUP menu 50 Front display information 24
Adventure (sound program) 27 D Front panel (part names and functions) 7
Amp (Audio Output, Setup menu) 43 Decoder Off (front display information) 24
Function (Setup menu) 48
ARC (Audio Return Channel) 61 Default setting restoration 51
ARC (HDMI, Setup menu) 43 Dimension (DSP Parameter, Setup menu) 45 G
Audio Decoder (front display information) 24 Dimmer (Function, Setup menu) 48 GEQ (Equalizer, Setup menu) 41
Direct Stream Digital (DSD) 58
Audio In (Option menu) 36
Distance (Speaker, Setup menu) 41
H
Audio Output (HDMI, Setup menu) 43 Hall in Munich (sound program) 28
Audio Return Channel (ARC) 61 Dolby Pro Logic (surround decoder) 29
Hall in Vienna (sound program) 28
Auto Power Standby (ECO, Setup menu) 47 Dolby Pro Logic II (surround decoder) 29
HDMI (Setup menu) 43
Auto Preset (FM radio, Option menu) 32 Drama (sound program) 27
HDMI Control (HDMI, Setup menu) 43
Automatic station preset (FM radio) 32 DSD (Direct Stream Digital) 58
HDMI OUT (TV) (Audio Output, Setup menu) 43
AutoPowerStdby (ECO, Setup menu) 47 DSP Level (DSP/Surround, Option menu) 35
HDMI signal compatibility 61
DSP Parameter (Sound, Setup menu) 45
B DSP Program (front display information) 24
Headphones 27
B RATE (Signal Info, Option menu) 36 High definition audio 61
DSP/Surround (Option menu) 35
Banana plug 14 Dynamic Range (Volume, Setup menu) 46 I
Basic playback operation 24 In.Trim (Volume Trim, Option menu) 35
BASS (sound mode) 30 E
Indicator (part names and functions) 8
Bass (Tone Control, Option menu) 35 ECO (Setup menu) 47
Information display (front display) 8
ECO Mode (ECO, Setup menu) 47
APPENDIX ➤ Index En 66
00_HTR-2067_om_En.book Page 67 Monday, January 27, 2014 9:33 AM
Information switching (front display) 24 R Subwoofer Trim (Volume Trim, Option menu) 35
INIT (ADVANCED SETUP menu) 51 Rear panel (part names and functions) 9 SUR.DECODE (sound mode) 29
Initial Volume (Volume, Setup menu) 46 RemID Mismatch (error indication) 57 Surround (Speaker, Setup menu) 40
Input (front display information) 24 Remote control (part names and functions) 10 Surround decoder 29
Input Rename (Function, Setup menu) 48 Remote control ID setting 50 SW.Trim (Volume Trim, Option menu) 35
Input Trim (Volume Trim, Option menu) 35
Internal Error (error indication) 57
REMOTE ID (ADVANCED SETUP menu) 50 T
Rename (input name) 48 Test Tone (Speaker, Setup menu) 42
L Roleplaying Game (sound program) 27 The Bottom Line (sound program) 28
Language (Setup menu) 49 S The Roxy Theatre (sound program) 28
Level (Speaker, Setup menu) 41 SAMPL (Signal Info, Option menu) 36 Tone Control (Option menu) 35
LFE (Low Frequency Effects) 58 Sampling (Signal Info, Option menu) 36 Treble (Tone Control, Option menu) 35
Lipsync 58 Scale (Volume, Setup menu) 46 TU (ADVANCED SETUP menu) 51
Lipsync (Option menu) 36 SCENE (HDMI, Setup menu) 44 TV Audio Input (HDMI, Setup menu) 43
Lipsync (Sound, Setup menu) 45 Scene configuration 25 TV FORMAT (ADVANCED SETUP menu) 51
Low Frequency Effects (LFE) 58 SCENE function 25 V
M SCENE link playback 25 V IN (Signal Info, Option menu) 36
Manual station preset (FM radio) 32 Sci-Fi (sound program) 27 V OUT (Signal Info, Option menu) 36
Max Volume (Volume, Setup menu) 46 Select (Lipsync, Setup menu) 45 VERSION (ADVANCED SETUP menu) 51
Memory Guard (Function, Setup menu) 48 Setup menu 37 Video In (Signal Info, Option menu) 36
Menu language selection 21 Signal Info (Option menu) 36 Video Out (Option menu) 36
Monaural reception (FM radio) 31 Signal information 36 Video Out (Signal Info, Option menu) 36
Mono Movie (sound program) 27 SILENT CINEMA 27 Video signal type setting 51
MOVIE (sound program category) 27 Sleep timer 10 Video/audio input jack combination 18
MUSIC (sound program category) 28 Sound (Setup menu) 45 Virtual CINEMA DSP 27
Music Video (sound program) 28 Sound field effect 27 Virtual CINEMA FRONT 27
Muting 24 Sound mode selection 26 Virtual CINEMA FRONT (Speaker, Setup menu) 41
Sound program 27 Voltage selection 20
N Speaker (Setup menu) 40 Volume (Sound, Setup menu) 46
NTSC (TV FORMAT, ADVANCED SETUP menu) 51 Speaker placement 12 Volume Trim (Option menu) 35
O Spectacle (sound program) 27
Sports (sound program) 27
Option menu 34
Standard (sound program) 27
P Standby Sync (HDMI, Setup menu) 43
PAL (TV FORMAT, ADVANCED SETUP menu) 51 Station preset (FM radio) 32
Panorama (DSP Parameter, Setup menu) 45 Stereo reception (FM radio) 31
Power management 47 STRAIGHT (sound mode) 29
Preset station selection (FM radio) 33 Straight decode 29
Subwoofer (Speaker, Setup menu) 40
Subwoofer Phase (Speaker, Setup menu) 41
APPENDIX ➤ Index En 67
00_HTR-2067_om_En.book Page 68 Monday, January 27, 2014 9:33 AM