The document outlines 3 testing conditions and procedures: 1) Dry condition involves placing the sample outside at 32-35°C before testing, 2) Dry-Wet condition involves placing the sample outside at 32-35°C then in a 60°C water bath for 24 hours before testing, 3) Dry-Wet-Dry-Wet condition involves placing the sample outside at 32-35°C, then in a 60°C water bath for 24 hours, again outside at 32-35°C for 24 hours, and finally in a 60°C water bath for 24 hours before testing.
The document outlines 3 testing conditions and procedures: 1) Dry condition involves placing the sample outside at 32-35°C before testing, 2) Dry-Wet condition involves placing the sample outside at 32-35°C then in a 60°C water bath for 24 hours before testing, 3) Dry-Wet-Dry-Wet condition involves placing the sample outside at 32-35°C, then in a 60°C water bath for 24 hours, again outside at 32-35°C for 24 hours, and finally in a 60°C water bath for 24 hours before testing.
The document outlines 3 testing conditions and procedures: 1) Dry condition involves placing the sample outside at 32-35°C before testing, 2) Dry-Wet condition involves placing the sample outside at 32-35°C then in a 60°C water bath for 24 hours before testing, 3) Dry-Wet-Dry-Wet condition involves placing the sample outside at 32-35°C, then in a 60°C water bath for 24 hours, again outside at 32-35°C for 24 hours, and finally in a 60°C water bath for 24 hours before testing.
1 Dry After sample preparation, the sample was placed outside at
atmospheric temperature which was recorded between 32℃ - 35℃ before the sample is tested. 2 Dry-Wet After sample preparation, the sample was placed outside at atmospheric temperature which was recorded between 32℃ - 35℃ then the sample was placed in a water bath maintained at 60℃ ± 1℃ for 24hrs before testing. 3 Dry-Wet-Dry-Wet After sample preparation, the sample was placed outside at atmospheric temperature which was recorded between 32℃ - 35℃ then the sample was placed in a water bath maintained at 60℃ ± 1℃ for 24hrs. The sample is again placed outside at atmospheric temperature which was recorded between 32℃ - 35℃ for 24hrs and it was placed in a water bath maintained at 60℃ ± 1℃ for 24hrs before testing.