Professional Documents
Culture Documents
Voltage Current Protector GPS8
Voltage Current Protector GPS8
Instruction Manual
General
■Applications
-Overvoltage ,undervoltage and overcurrent protection for household
equipment.
■ Function Features
-Voltage / current monitoring and protection.
-Double bus wiring design stronger ability.
-Over / under voltage value and over-current value can be set.
-Self reset after fault.
-Digital display voltage, current value, fault status can be displayed by LED.
-1-MODULE,DIN rail mounting.
■Model and connotation
GPS8
GPS8 -01 63A GPS8 -02 63A Incoming line mode
U:upper incoming line
D:lower incoming line
GPS8 Series
A
Hysteresis 5%(U,I)
Power open and close
MD
Power-up delay 2s indicator
Reset time 2~900s(factor y default:30s)
Measurement error ≤1%
Operating temperature -20℃ to +55℃(-4℉ to 131℉)
Storage temperature -35℃ to +75℃(-22℉ to 158℉)
Wiring Diagram
Mounting/DIN rail Din rail EN/IEC 60715
Protection degree IP40 for front panel/IP20 terminals
Operating position any GPS8-□U GPS8-□D
Overvoltage cathegory
N 1 N 2
Pollution degree
Dimensions 82×36×68mm
Weight 130g 135g
N 2 N 1
Functions Diagram
GPS8-01/02 Hysteresis5%
GPS8-02
Hysteresis5%
I>
Hysteresis5%
I
LED:
U LED: >I
LED: Ts 5s Tr
LED: >U
LED:<U
Ts 0.5s Tr 0.5s Tr <0.5s <0.5s Ts:Power-up delay(2s)
Tr:Reset delay time(2~900s)
-1-
Parameter setting
GPS8-01 GPS8-02
NOTE:
Short press can add and drop parameters, long press can be
quickly set.If 60s does not operate the key, it will exit automatically. Reset time setting
You can press and hold for 3 seconds to exit the setup mode and 2s~900s
enter the running mode.
Example
AC220V
N L
N
VA-Protector
C63 ON 1 3 >U C25 ON 1 3 C16 ON 1 C16 ON 1
400V~ 400V~ 230V~ 230V~
OFF OFF OFF OFF
3000
IEC 60898-1
2 4 <U V 3000
IEC 60898-1
2 4 3000 2
IEC 60898-1
3000 2
IEC 60898-1
>I
MD
GPS8-02 63A
N IN
Dimensions(mm)
GPS8-01 GPS8-02
N N
V-Protector VA-Protector
>U
<U V
V
>I
>U <U
82
MD MD
N IN N IN
-2-