Professional Documents
Culture Documents
1. Read parameter 103 Motor voltage with a Par. 103 value: __________________
read command
2. Change the value of parameter 103 Motor voltage to Par. 103 value: __________________
415 V and read the parameter again
4. Change the language in VLT 5000 to spanish Par. 001 value: __________________
with a write command
5. Send a new value of 66 sec to Par. 317 Time out Time out value: _______________ Hex
Remember conversion index.
6. Change the Display readout in VLT 5000 par. 009 Par. 009 value: __________________
to control word
8. Send a new ramp up time (Par. 207) on 1550 sec Ramp value: _________________ Hex
to VLT 5000.
9. Read that the ramp up time (Par. 207) is 1550 sec Rampe value: _________________ Hex
with a read command
Page 1 of 2.
Printed by: Drives Division, DKDD /conversion/tmp/activity_task_scratch/658736940.doc
VLT 5000 Profibus training Danfoss Drives A/S
Created: 2000-10-0521 Application Department
10. Send a new ramp up time (Par. 207) on 1.0 sec Ramp value: _________________ Hex
to VLT 5000.
12. Check the number of indexes in par. 991 No. of index : ____________________
Page 2 of 2.
Printed by: Drives Division, DKDD /conversion/tmp/activity_task_scratch/658736940.doc