Professional Documents
Culture Documents
The Picarro L2130-i isotopic water analyzer provides the The L2130-i has three measurement modes. The Standard
high-quality measurements of water stable isotopes that are mode processes 27 samples per day. The Express mode
critical for demanding applications such as paleoclimatology, delivers faster high-precision measurements for up to 50
hydrology, and oceanography. Our patented CRDS samples per day. The Survey mode makes super-fast
technology uses a laser to quantify spectral features of gas approximations of isotopic values for very large sample
phase molecules in an optical cavity. Picarro’s unique design batches—up to 900 injections per day. This enables more
enables an effective measurement path length of up to 20 efficient sorting and rearranging of sample clusters to
kilometers in a compact cavity, which delivers exceptional reduce the memory effect, and thereby accelerates the
precision and sensitivity in a small footprint. As a result, measurement process and increases the accuracy of the
δ18O and δD are measured with the highest precision and results. Combining the Express and Survey modes will
reproducibility (see Figures 1 and 2). further increase throughput by reducing the time it takes to
measure 100 samples by up to 68 hours.
Guaranteed:
δ18O – 0.010‰ δ18O – 0.015‰
Precision (1σ) δ18O – 0.025‰
δD – 0.05‰ δD – 0.05‰
δD – 0.1‰
Guaranteed:
δ18O – 0.059‰ δ18O – 0.100‰
Zero Drift (24 hour) δ18O – 0.2‰
δD – 0.30‰ δD – 0.43‰
δD – 0.8‰
Throughput
(6 injections for each sample; 54 minutes per sample / 27 54 minutes per sample / 27 29 minutes per sample / 50
for Express mode, samples per day samples per day samples per day
10 injections per sample)
Guaranteed:
(after the 3rd injection) (after 15 min)
(after the 3rd injection)
Memory δ18O – 99% δ18O – 99%
δ18O – 99%
δD – 98% δD – 98%
δD – 98%
* Typical performance is defined as the median of testing results from a number of sequentially built L2130-i analyzers. Results available upon request.
Sample Pressure 300 to 1000 Torr (40 to 133 kPa) For Solids
A0213 – Induction Module (IM)
Sample Flow Rate ~40 sccm at 760 Torr, no filtration required
© 2021 PICARRO, INC. 3105 Patrick Henry Drive, Santa Clara, CA 95054 | 408-962-3900 | sales@picarro.com | picarro.com
41-0054 Rev A
LIT CODE: L2130-i-DS48-V2.0-210201