Professional Documents
Culture Documents
HD7751
Service Manual
PRODUCT INFORMATION TECHNICAL INFORMATION
Safety info - Voltage : 220 - 240 V
- This product meets the requirements regarding - Frequency : 50 - 60 Hz
interference suppression on radio and TV. - Power consumption : 1000 W
- After the product has been repaired, it should function - Standby power : 0.5 W
properly and has to meet the safety requirements as - Contents jug : 1200 cc
officially laid down at this moment. - Colour setting HD7740 : Black / Metal
- Filter size : 1x4
- Dimensions (L x H x W) : 310 x 430 x 215 mm
- Temperature coffee after brewing : 80 °C
- SAP coding : HD7751
OPTIONAL (accessories)
- No specific issues
Published by Philips Consumer Lifestyle Printed in the Netherlands © Copyright reserved Subject to modification
12/04
DISASSEMBLY- AND RE-ASSEMBLY ADVICE
HD7751
A. Heating element removal
1. Turn the appliance upside down and remove the 5. During installation of the grinder motor be aware of
bottom from the base by unscrewing the 4 screws A the position of the Knob compared with the position
under the rubber foot. of gearwheel 4. On gearwheel 4 you will see an arrow
2. Remove the heating element by unscrewing the and when this arrow points to the marked line, the
5 screws B. Indication on the knob has to point to number 5.
This means the flat side of gearwheel 1 has to be on the
3. Remove the tubes from the heating element and
side off the front panel.
disconnect the wires.
B. PCB removal
1. Turn the appliance upside down and remove the Gearwheel 4
bottom from the base by unscrewing the 4 screws A Stronger coffee
Flat
under the rubber foot.
side
2. Remove the 2 screws C.
3. Disconnect the wires. Gearwheel 1
Milder coffee
2-7
REPAIR INSTRUCTIONS
HD7751
De-scaling
If the water system is nearly or less clogged by scale then
operate the coffeemaker a few times with vinegar or with a
10-15% solution of either vinegar-acid, citric acid or tartar
acid, into cold tap water.
Do not use other de-scaling agents as these may harm the
appliance.
If this procedure does not restore the function, then switch
off the coffeemaker when the acid has passed through during
approximately 3 min. Keep the appliance in this condition
overnight and continue/repeat the cleaning operation.
After the de-scaling procedure, operate the coffeemaker twice
with tap water in order to rinse away any residual substances.
ELECTRICAL DIAGRAM
Black
H3
W1 (Blue) (Black)
Warm 1
On/Off L N
Switch X4 (White)
Brown
L Thermostat
Blue H4 (White)
Mains N
3-7
PARTS LIST
HD7751
= changed
4-7
EXPLODED VIEW
HD7751
9
COAR 7 1
SE 6 2
5 4 3
FINE
2-10
STRE
NGTH
F
/OF
ON
CALC
RESE
T
10
8
4 23
2
21
1
B 2
C
5x 2x
A
4x
5-7
EXPLODED VIEW
HD7751
3
D
3x
5
6
7
6
8 E
8x
9
10
9
COAR 7 1
SE 6 2
5 4 3
FINE
F
7x
24 22
11
G
4x
2-10
STRE
NGTH
F
/OF
ON
CALC
RESE
T
10
8
6-7
EXPLODED VIEW
HD7751
12 2-10
STRE
NGTH
CALC
RESE
T
13
H
2x
14 ON
/OF
F
15 10
8
17
I
2x
19
18
20
7-7