Professional Documents
Culture Documents
T221 WDSM
T221 WDSM
1.Disassembly procedures…2
2.Disassembly tools…………2
3.Screw List…………………2
4.Disassembly of front and rear
panel……………………3
5.Disassembly of buttons……6
6.Disaseembly of panel………7
7.Disassembly of M/B…………9
8.Disassembly of P/B………11
-1-
1.Disassembly Procedures
2.Disassembly tools
Hex Screwdriver:5m/m
POM Rod
3. Screw List
2 1.Supporting screws
1
3
-2-
4. Front and rear panel disassembly
-3-
5. Insert the slotted
screwdriver at a 90 degrees
angle into the right opening
45 度
to open the panel.
-4-
1. Remove the earth wire
and then remove the
button board upwards
circled in red towards
the direction point.
-5-
5. Disassembly of buttons
-6-
6. Disassembly of panel
2 2. As indicated on the
1 2
pictures to the left. Pull the
wires outwards and then
move the power wires out.
4 3
3
-7-
3. Push the hinge circled in
red on either side and pull
out the cable.
4. Panel diassembled.
-8-
7. Disassemble of M/B
-9-
3.Remove the M/B and
turn it around.
4.There are 3 cables
connected to the M/B. The
3 cables circled in red can
be directly removed by
pulling.
-10-
8. Disassembly of P/B