Professional Documents
Culture Documents
AREA COVERAGE
AL FORM 22-25 M2/LITER
STORAGE
®
M
Al Form has a minimum shelf life of 12 months when stored in the original
unopened containers under normal warehouse conditions.
R
ADDITIONAL INFORMATION
F O AL-FORM
®
L -
For any other additional information kindly contact.
NAAZ INDUSTRIES Office as below.
A
NAAZ INDUSTRIES
For quick, clean and easy stripping of Moulds and Formwork Al Form Mould release agent is a Oil with Perfect Viscosily And pale
For high Quality, Fair faced and Stain fee concretet Yellow Coloured Liquid.
R M
Reduces opportunity of Damage to Formwork, Extending Usable Life.
Corrosion on the steel moulds is reduced.
R M
The goods about Al Form is it just have to be coated once irrespective of
Minimizes Surface Staining.
F O F O
the types of mould whether old or new or absorbing material.
white Cement.
L -
Promoting High Qaulity Fair Faced Concrete even with the
-
Al Form non absorbing property Reduces the quantity of Al Form required.
L
A A
Al Form can even be washed with water after applying on Mould and before
Inhibits the corrosion of Steel Formwork.
concreting the mould. Its water proofing quality makes it the perfect material
Suitable for the Use of all types of Formwork like Aluminum(Mivan),
for Formwork purpose.
Tunnel Formwork, Plastic Formwork, Timber ply, GRP and other Resinous.
Easier Release and Reduced residue minimize the chance of damage to the
Extending usable life of the formwork.
mould during the cleaning and stripping.
Protect the moulds defect and hence frequency of concrete defect is almost
eliminated.
SUPPORT BY OUR TEAM APPLICATION
Naaz Industries offers a support service to Specifiers, Al Form can be applied by all normal methods, including brush, sponge and
End user and Contractors. other traditional means.
On site assistance by our Team. The good about Al Form is it just have to be coated once irrespective of the
PROPERTIES types of mould whether old or new or absorbing material.
Specific Gravity Typically 0.85 - 0.88 at 25oc
M M
Depending upon the porosity and the texture of the mould surface Typical
R
R
Al Form can be used on ALUMINUM (MIVAN), TUNNEL FORMWORK, coverage rate of 22m2 to 55m2 per liter can be obtained.
O
PLASTIC FORMWORK, TIMBER PLY, STEEL, GRP and other Resinous
F F O
The best Result is obtained with the thinnest Practical coating.
-
Formwork Surface. Over application should be avoided.
A
Mould should be cleaned of surface deposits like of rust, concreate, oil or
Inadequate cleaning may lead to surface blemishes due to the adhering material
A
can be uneconomic and can lead to the surface dusting.
COVERAGE RATE
New ALUMINUM (MIVAN), TUNNEL FORMWORK, After the use the Formwork or mould should be brushed or wiped clean of
PLASTIC FORMWORK, TIMBER PLY, STEEL, GRP can be directly coated any excess dust prior to the re application of Al Form for the next use.
with the Al Form. The use of Al Form minimizes the amount of time and effort required for
Excessive application on the Flat surface leads to pooling of Al Form
the process.
which can be uneconomic. and it can create patches on surface.