Professional Documents
Culture Documents
3 Fitting Guidelines 11-2018
3 Fitting Guidelines 11-2018
FITTING GUIDELINES
FITTING GUIDELINES
How to check the fit
The H&E should be fastened according to models underbust measurement (see next page).
1
FITTING GUIDELINES
How to check the fit
70 68 70 72
UNDERBUST MEASUREMENT
75 73 75 77
80 78 80 82
BAND SIZE
(CM)
85 83 85 87
90 88 90 92
95 93 95 97
Exception:
If a Soft Bra (style without wire) has 4R H&E then the fitting should be done on the last 3 rows of hooks according to the
chart above. For this type the 4th row of hooks is added so the customer can make the bra tighter. This is important when
we have single sizes to ensure we can reach as wider range of customers as possible.
2
FITTING GUIDELINES
How to check the fit
3. Wing tension
Pull both the top and bottom wing away from the body to ensure that the tension between top and bottom wing elastic
feels balanced and equal.
3
FITTING GUIDELINES
How to check the fit
4. Gore tension
This step is applicable for styles with gore only, for styles with cradle please continue to next step.
Check the tension underneath the bottom of gore with forefinger. It should sit flat against to body and not stand away.
5. Back hiking
Put a measurement tape around model's underbust, the bottom wing should be parallel to the measurement tape and not
hiking (see picture on the right side).
4
FITTING GUIDELINES
How to check the fit
6. Cup shape
Check both the top and side view of the cup for the following:
5
FITTING GUIDELINES
How to check the fit
7. Standard measurements
• Front Strap Distance (FSD)
• Back Strap Distance (BSD)
Front Strap
Distance
Back Strap
Distance
Hook Up
Cradle Seam to
Seam Distance
6
FITTING GUIDELINES
How to check the fit
* To calculate BSD for other H&E positions, add or remove 1.5CM as necessary.
7
FITTING GUIDELINES
How to check the fit
8. Cup emptiness
There should not be any flat or empty area at the bottom of the cup.
9. Gaping
There should not be any gaping at the apex.
8
FITTING GUIDELINES
How to check the fit
When the bra is worn it should be possible to pinch 1-2mm of the outer cup fabric at the highest point. If this is not possible
then the fabric is too tight and needs to be cut to release the volume. Please note, this can differ between fabric types.
9
FITTING GUIDELINES
How to check the fit
13. Wire
Ask the model if she is experiencing any discomfort from the wire.
Check to see if the wire is digging in at the gore and at the side.
10
FITTING GUIDELINES
How to check the fit
11
FITTING GUIDELINES
How to check the fit
Checking the wire play measurement should be done on table, not on body.
1.2CM
65A 70A 75A 80A 85A 90A 95A 100A
12
FITTING GUIDELINES
How to check the fit
Checking the boning play measurement should be done on table, not on body.
• For all styles exc. bandeau the standard boning play is 0.5CM.
• For bandeau styles only, the boning length should be totally 2CM shorter than the seam length.
13
FITTING GUIDELINES
How to check the fit
14
FITTING GUIDELINES
How to check the fit
19. Function
Below points are examples of questions related function that can be considered during the fitting:
20. Comfort
Below points are examples of questions related comfort that can be considered during the fitting:
15
FITTING GUIDELINES
How to check the fit
16
FITTING GUIDELINES
How to check the fit
17