You are on page 1of 1

exchange db not routes

p2p 10 s / dis 3s

hello ; lsp ; sequence number packet


pdu type 15 lan l5
pdu type 16 lan l6
p2p hello type 17

l1 lsp type 18
l2 lsp type 20

l1 csnp type 24
l2 csnp type 25
l1 psnp type 26
l2 psnp type 27

TLV
1- area address of source node
2- neighboring routers and pseudonodes
128- intradomain is-is routes
129- supported network layer protocols
130- external routes
132- ip interface addresses

the dis can be selected per level 1 and 2


hiighest interface priority / highest snpa (subnetwork point of attachement)
Election is preemptive

lsp valid for 1200 seconds . if lifetime expires , it is kept for 60 second then
flooded as expired
csnp : all lsp
psnp : subset of lsp

on broadcast dis multicast csnp every 10 second


on p2p csnp is sent only when the link comes up

with integrated is-is the best path is calculated to other routers . ip are treated
as end-system . a partial route calculation is used when ip reachability changes .

distribute list works with acl , prfix , route map


we can filter routers outboud because all routers should have the same db .
no diff between ext and int routes in routing table . needs to see the prefix
attributes in rib .

You might also like