Professional Documents
Culture Documents
April 2021
Page 1/3
1 2
3 4
5
UPPERSIDE
CLIP
CABLE GUIDE
6 TWIST
Install the part BASE_part2.stl
on the carrier plate with a m3 Attach the base to the carrier plate. First attach the clip on the upperside,
screw. then rotate the base and push it down. Also, make sure the heaters and
thermistors cables are placed into the guide on the backside of the base.
Page 2/3
Fix the base to the carrier plate If you have a bltouch attach it to the base
with two M3 screws with a M3 screw and M3 nut.
10
11 Install the 5015 blower fan to the fanduct by pushing it over the little bumps and then by
rotating it to into the right position. The fan shouldn‘t be fixed tightly (it should be a little
lose). Otherwise it won‘t achieve the highest rpm.
13
Cable chain
mounting holes
16mm aviation plug
or cable holder
14
FINISHED
Zip tie holes