Professional Documents
Culture Documents
RX300 S4
March 2009
PRIMERGY RX300 S4
Front View
DVD-ROM Drive
Back View
Inside View
front side
PCI Slot
System Fan
CPU
Instruction
This document contains basic product and configuration information that will enable you
to configure your system.
Only these tools will ensure a fast and proper configuration of your PRIMERGY server
or your complete PRIMERGY Rack system.
You can configure your individual PRIMERGY server in order to meet your specific
requirements.
Please follow the lines. If there is a junction, you can choose which way or component
you would like to take.
Go through the configurator by following the lines from the top to the bottom.
Key to
Or And
PRIMERGY RX300 S4
Data Sheet
Type Dual-Processor Rack Server
Model 3.5inch SAS model
Base Unit Xeon® E5205(1.86GHz) (with TPM) PGUR3041A3
Xeon® E5205(1.86GHz) (without TPM) PGVR3041A
CPU Frequencies Intel® Xeon® X5470(3.33GHz) *6 / X5460(3.16GHz) *7 / E5420(2.50GHz) *8 / E5405(2GHz) *9 /
X5270(3.50GHz) *10 / X5260(3.33GHz) *11 / E5205(1.86GHz)
Second-Level-Cache 12MB ( Intel® Xeon® X5470(3.33GHz) / X5460(3.16GHz) / E5420(2.50GHz) / E5405(2GHz) ) /
6MB ( Intel® Xeon® X5270(3.50GHz) / X5260(3.33GHz) / E5205(1.86GHz) )
Number of processors 1 (max. 2)
Number of cores
4 per processor ( Intel® Xeon® X5470(3.33GHz) / X5460(3.16GHz) / E5420(2.50GHz) / E5405(2GHz) ) /
2 per processor ( Intel® Xeon® X5270(3.50GHz) / X5260(3.33GHz) / E5205(1.86GHz) )
Front-Side-Bus
1333MHz ( Intel® Xeon® X5470(3.33GHz) / X5460(3.16GHz) / E5420(2.50GHz) / E5405(2GHz) / X5270(3.50GHz) / X5260(3.33GHz) ) /
1066MHz ( Intel® Xeon® E5205(1.86GHz) )
*1. Available memory capacity will be changed by the type of OS. Please find more details in Notes[Memory OS Compatibility List].
*2. Resolution is determined by functions of the display monitor and OS.
*3. HDD capacity is calculated according to the formulas 1GB=10003 byte and 1TB=10004 byte.
*4. All internal HDD must be configured as RAID structure.
*5. Drivers for Linux are not attached. Please download and use drivers of the following URL.
http://www.fujitsu.com/global/services/computing/server/ia/driver/
*6. CPU Conversion kit: Xeon E5205(1.86GHz) -> Xeon X5470(3.33GHz) (PGBFU42M) is available for upgrading to Intel® Xeon® X5470(3.33GHz).
*7. CPU Conversion kit: Xeon E5205(1.86GHz) -> Xeon X5460(3.16GHz) (PGBFU42L) is available for upgrading to Intel® Xeon® X5460(3.16GHz).
*8. CPU Conversion kit: Xeon E5205(1.86GHz) -> Xeon E5420(2.50GHz) (PGBFU42K) is available for upgrading to Intel® Xeon® E5420(2.50GHz).
*9. CPU Conversion kit: Xeon E5205(1.86GHz) -> Xeon E5405(2GHz) (PGBFU42J) is available for upgrading to Intel® Xeon® E5405(2GHz).
*10. CPU Conversion kit: Xeon E5205(1.86GHz) -> Xeon X5270(3.50GHz) (PGBFU42N) is available for upgrading to Intel® Xeon® X5270(3.50GHz).
*11. CPU Conversion kit: Xeon E5205(1.86GHz) -> Xeon X5260(3.33GHz) (PGBFU42H) is available for upgrading to Intel® Xeon® X5260(3.33GHz).
*12. TPM is available for BitLockerTM Drive Encryption of Windows Server® 2008.
*13. This is the maximum memory capacity when Memory Expansion Board (PG-RB108) is applied.
*14. When Serial Port (PG-COM03) is applied, PCI Express slot x 1 is occupied.
*15. When Parallel Port Option (PG-PP05) is applied, PCI Express slot x 1 is occupied.
*16. Only 6 ports are available.
*17. One USB-FDD is required as a minimum in multiple servers.
It is necessary to procure USB-FDD separately.
*18. Regarding supported kernel versions of Linux, please refer to the following list.
http://www.fujitsu.com/downloads/PRMRGY/linux-os-kernel-compatibility-list.pdf
*19. Total number of cores of CPU(s) should be four or more for using VM (Virtual Machine) function.
*20. ServerStart doesn't support Linux.
Configuration Diagram
Bay 1
DIMM Slot 1C
DIMM Slot 1D
DIMM Slot 2C
DIMM Slot 2D
DIMM Slot 3C
DIMM Slot 3D
DIMM Slot 1A
DIMM Slot 1B
DIMM Slot 2A
DIMM Slot 2B
DIMM Slot 3A
DIMM Slot 3B
SAS
Bay 2
SAS
Bay 3
SAS
CPU
Xeon® X5470 / Xeon® X5470 / Bay 4
X5460 / E5420 / X5460 / E5420 / SAS
E5405 / E5405 /
X5270 / X5260 / X5270 / X5260 /
E5205 E5205
Bay 5
SAS
3.5 inch HDD Bay 3 3.5 inch HDD Bay 6
(hot plug) *1 (hot plug)
Bay 6
3.5 inch HDD Bay 2 3.5 inch HDD Bay 5
SAS
(hot plug) *1 (hot plug)
*1.If Tape Drv DAT72 36GB internal w/ Drive Cage (PG-DT504D) is installed, Hard Disk 3.5inch Bay (hot plug)
HDD cannot be installed for the position of 3.5inch Bay 2 and 3. Standard Drive Cage ( HDD and Backup Device )
( HDD x 4ports + Backup Device )
*Components installed as standard configuration marked in grey.
Bay 1
SAS
Bay 4
SAS
Bay 5
SAS
Bay 6
SAS
Backup Device
( DAT72 )
PRIMERGY RX300 S4
SCSI Ctrl U320 lp PG-2281L PCI Express (x4) - [1] [2] - [3] [4] - 1 External SCSI Controller
(*1) Fibre Channel Controller(PG-FC202) and Fibre Channel Controller lp (PG-FC203L) cannot be installed at a time.
PRIMERGY RX300 S4
Connection Table
CPU
Processor Xeon X5470(3.33GHz)
Max: 2 CPU PG-FG42M
CPU Slot PGBFG42M (for CTO)
*. This option is available when CPU Conversion Kit:
Xeon E5205(1.86GHz) -> Xeon X5470(3.33GHz) (PGBFU42M) is applied.
*CPU Conversion kit (available only as a Configure To Order (CTO) option; no separate shipment is possible)
CPU Conversion kit: Intel® Xeon® E5205(1.86GHz/6MB) -> Intel® Xeon® X5470(3.33GHz/12MB)
Xeon E5205(1.86GHz) Convert the CPU installed as standard in the base unit to the other.
PGBFU42M
-> Xeon X5470(3.33GHz) (Note: This option can be ordered only as coupled with the base unit.
CPU Conversion kit: Intel® Xeon® E5205(1.86GHz/6MB) -> Intel® Xeon® X5460(3.16GHz/12MB)
Xeon E5205(1.86GHz) Convert the CPU installed as standard in the base unit to the other.
PGBFU42L
-> Xeon X5460(3.16GHz) (Note: This option can be ordered only as coupled with the base unit.
CPU Conversion kit: Intel® Xeon® E5205(1.86GHz/6MB) -> Intel® Xeon® E5420(2.50GHz/12MB)
Xeon E5205(1.86GHz) Convert the CPU installed as standard in the base unit to the other.
PGBFU42K
-> Xeon E5420(2.50GHz) (Note: This option can be ordered only as coupled with the base unit.
CPU Conversion kit: Intel® Xeon® E5205(1.86GHz/6MB) -> Intel® Xeon® E5405(2GHz/12MB)
Xeon E5205(1.86GHz) Convert the CPU installed as standard in the base unit to the other.
PGBFU42J
-> Xeon E5405(2GHz) (Note: This option can be ordered only as coupled with the base unit.
CPU Conversion kit: Intel® Xeon® E5205(1.86GHz/6MB) -> Intel® Xeon® X5270(3.50GHz/6MB)
Xeon E5205(1.86GHz) Convert the CPU installed as standard in the base unit to the other.
PGBFU42N
-> Xeon X5270(3.50GHz) (Note: This option can be ordered only as coupled with the base unit.
CPU Conversion kit: Intel® Xeon® E5205(1.86GHz/6MB) -> Intel® Xeon® X5260(3.33GHz/6MB)
Xeon E5205(1.86GHz) Convert the CPU installed as standard in the base unit to the other.
PGBFU42H
-> Xeon X5260(3.33GHz) (Note: This option can be ordered only as coupled with the base unit.
(Standard)
2. The memory capacities of the slots should be in ascending order in the following sequence:
5. Available memory capacity depends on the type of OS and some memory area is used for PCI resource management.
The following table shows installed memory capacity and available memory capacity.
Installed Memory
OS Available Memory Capacity
Capacity
Windows Server® 2008 Standard (32-bit) ~3.0GB Same as installed memory capacity
Windows Server® 2003 R2, Standard Edition (SP2)
Windows Server® 2003, Standard Edition (SP2) 3.0GB~4.0GB 3.0GB *1
Windows Server® 2008 Enterprise (32-bit) ~3.0GB Same as installed memory capacity
Windows Server® 2003 R2, Enterprise Edition (SP2)
Windows Server® 2003, Enterprise Edition (SP2) 3.0GB~48.0GB 3.0GB *1
*1. If installed memory capacity is more than 3.0GB, it is necessary to set "PAE (Physical Address Extension)" of OS.
The following (1) and (2) are the ways to set "PAE" of OS, and Fujitsu recommends (1).
Type of HDD connection PRIMERGY RX300 S4 Internal Backup Devices PRIMERGY SX10 S2 Internal Backup Devices
Connection Interface USB (''1) Connection SCSI Wide (''2) Backup Devices Connection
-
SAS RAID Ctrl
(not connect)
SCSI Card (PG-2281L / PGB2281L)
RAID
When Internal backup device SCSI Cable (PG-CBLS034 / PGBCBLS035)
is installed. Onboard USB
SAS RAID Ctrl
(2 HDD bays are occupied.) (internal port)
Internal HDD
*. RAID 0/1/1+0/5/6 configuration can be set. HDD SAS 15k 147GB hot plug 3.5inch
PG-HDB45A
PGBHDB45A (for CTO)
SAS RAID Ctrl Conversion kit HDD SAS 15k 450GB hot plug 3.5inch
( 8ports / 256MB / without BBU -> 8ports / 512MB / with BBU ) PG-HDB55A
PGB2U48CL PGBHDB55A (for CTO)
not installed 6
4
Tape Drv DAT72 36GB internal w/ Drive Cage
( HDD cannot be installed for the position
( PG-DT504D / PGBDT504D )
of 3.5inch Bay 2 and 3. )
External DVD-RAM
PCI Express
Bus
*. Please find more details in Rackmount [Hard Disk Cabinet (PRIMERGY SX35)].
PCI Express
Bus
*. Please find more details in Rackmount [Backup Device Cabinet (PRIMERGY SX10 S2)].
Serial Port
Serial Port
PCI Slot PG-COM03
*. This option occupies one PCI slot.
Specifications are subject to change without notice. For the latest detailed information, contact your local representative.
All brand names and product names are trademarks and registered trademarks of their respective holders.