Professional Documents
Culture Documents
Mini Countryman 2012 Owner Manual
Mini Countryman 2012 Owner Manual
Contents
A -Z
OWNER'S MANUAL
MINI COUNTRYMAN
ProCarManuals.com
DRIVING TIPS 99
100 Things to remember when driving
NAVIGATION 111
112 Navigation system
114 Destination entry
123 Route guidance
131 What to do if…
ENTERTAINMENT 133
134 On/off and tone
137 Radio
144 CD player
146 External devices
Notes
Using this Owner's {...} Verbal instructions to use with the voice
activation system.
Manual
{{...}} Identifies the answers generated by the
We have tried to make all the information in this voice activation system.
Owner's Manual easy to find. The fastest way to
find specific topics is to refer to the detailed Symbols on vehicle components
index at the back of the manual. If you wish to Indicates that you should consult the rele-
gain an initial overview of your vehicle, you will vant section of this Owner's Manual for
find this in the first chapter. information on a particular part or assembly.
Should you wish to sell your MINI at some time in
the future, remember to hand over this Owner's
Manual to the new owner; it is an important part Vehicle equipment
of the vehicle.
ProCarManuals.com
4
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Notes
For your own safety, use genuine parts establishment or individual using any certified
and accessories approved by the manu- automotive part.<
facturer of the MINI.
When you purchase accessories tested California Proposition 65 warning
and approved by the manufacturer of the MINI California law requires us to issue the following
and Original MINI Parts, you simultaneously warning:
acquire the assurance that they have been thor-
Engine exhaust and a wide variety of
oughly tested by the manufacturer of the MINI
automobile components and parts,
to ensure optimum performance when installed
including components found in the interior fur-
on your vehicle.
nishings in a vehicle, contain or emit chemicals
The manufacturer of the MINI warrants these known to the State of California to cause cancer
parts to be free from defects in material and and birth defects and reproductive harm. In
workmanship. addition, certain fluids contained in vehicles and
The manufacturer of the MINI will not accept any certain products of component wear contain or
liability for damage resulting from installation of emit chemicals known to the State of California
parts and accessories not approved by the man- to cause cancer and birth defects or other repro-
ufacturer of the MINI. ductive harm.
The manufacturer of the MINI cannot test every Battery posts, terminals and related accessories
product made by other manufacturers to verify contain lead and lead compounds. Wash your
if it can be used on a MINI safely and without risk hands after handling.
to either the vehicle, its operation, or its occu- Used engine oil contains chemicals that have
pants. caused cancer in laboratory animals. Always
Original MINI Parts, MINI Accessories and other protect your skin by washing thoroughly with
products approved by the manufacturer of the soap and water.<
MINI, together with professional advice on using
these items, are available from all MINI dealers.
5
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Notes
Service Guide Booklet for Canadian models. America, LLC, P.O. Box 1227, Westwood, New
Your vehicle has been specifically adapted and Jersey 07675-1227, Telephone 1-800-831-
designed to meet the particular operating con- 1117.
ditions and homologation requirements in your If NHTSA receives similar complaints, it may
country and continental region in order to open an investigation, and if it finds that a safety
deliver the full driving pleasure while the vehicle defect exists in a group of vehicles, it may order
is operated under those conditions. If you wish a recall and remedy campaign. However, NHTSA
to operate your vehicle in another country or cannot become involved in individual problems
region, you may be required to adapt your vehi- between you, your dealer, or MINI of North
cle to meet different prevailing operating condi- America, LLC.
tions and registration requirements. You should To contact NHTSA, you may call the Vehicle
also be aware of any applicable warranty limita- Safety Hotline toll-free at 1-888-327-4236
tions or exclusions for such country or region. In (TTY: 1-800-424-9153); go to
such a case, please contact Customer Relations http://www.safercar.gov; or write to:
for further information. Administrator, NHTSA, 400 Seventh Street, SW.,
Washington, DC 20590. You can also obtain
Maintenance other information about motor vehicle safety
Maintain the vehicle regularly to sustain road from http://www.safercar.gov
safety, operational reliability and the New Vehi-
cle Limited Warranty. For Canadian customers
Specifications for required maintenance mea- Canadian customers who wish to report a
sures: safety-related defect to Transport Canada,
> MINI Maintenance System Defect Investigations and Recalls, may tele-
phone the toll-free hotline 1-800-333-0510.
> Service and Warranty Information Booklet
You can also obtain other information about
for US models
motor vehicle safety from http://www.tc.gc.ca/
> Warranty and Service Guide Booklet for roadsafety.
Canadian models
6
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Notes
ProCarManuals.com
7
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
ProCarManuals.com
Watch Me.
CONTROLS
DRIVING TIPS
ProCarManuals.com
NAVIGATION
ENTERTAINMENT
COMMUNICATIONS
MOBILITY
REFERENCE
Cockpit
Vehicle equipment
In this chapter, all production, country, and that is not available because of, for example,
optional equipment that is offered in the model selected options or country version. This also
range is described. Equipment is also described applies to safety related functions and systems.
10
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Cockpit AT A GLANCE
Low beams 81
Turn signals 53
High beams 83
Headlamp flasher 53 Activating/deactivating cruise
or
control 56
Roadside parking lamps 83
Computer 59
Left side
ProCarManuals.com
3 Tachometer 12
Increasing or reducing volume
Instrument lighting 83
11
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
AT A GLANCE Cockpit
Displays
ProCarManuals.com
12
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Cockpit AT A GLANCE
or 2.
The following indicator lamps in display area 1
Some lamps will be tested for proper functioning indicate certain functions:
when the engine is started or the ignition is
switched on and will therefore light up briefly. High beams/headlamp flasher 83
13
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
AT A GLANCE Cockpit
Selecting waveband
Recirculated-air mode
14
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Cockpit AT A GLANCE
Cooling function
or Around the headliner
Defrosting windows
Windshield heating
Ambient lighting 84
Power windows, rear 35
Interior lamps 84
6 Buttons in the center console
Sport button 72
15
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
AT A GLANCE Onboard computer
Onboard computer
1 Control Display
2 MINI joystick with buttons
16
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Onboard computer AT A GLANCE
Operating principle
As of radio readiness, the following message
appears on the Control Display:
17
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
AT A GLANCE Onboard computer
Arrows pointing left or right indicate that addi- 3. Press the MINI joystick to confirm the set-
tional panels can be accessed. ting.
18
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Onboard computer AT A GLANCE
1 Time
2 Telephone status
> Incoming, outgoing or missed call
3. Turn the MINI joystick until "Time/Date" is > Roaming active
selected, and press the MINI joystick.
ProCarManuals.com
19
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
AT A GLANCE Letters and numbers
1. Turn the MINI joystick: select the letters or Depending on the menu, you can switch
numbers. between entering uppercase letters and lower-
case letters:
2. Select additional letters or numbers if
needed.
Symbol Function
3. "OK": Confirm entry.
Move the MINI joystick
forward: to switch from
uppercase letters to lower-
case letters
Symbol Function
Wordmatch concept during navigation
Press the MINI joystick: Entry of names and addresses: the selection is
delete one letter or num- narrowed down every time a letter is entered
ber and letters may be added automatically.
Destination search: the entries are continuously
Press and hold the
compared to the data stored in the vehicle.
MINI joystick: delete all let-
ters or numbers > The only letters offered for entering
addresses are those for which data are avail-
Enter a blank space able.
> Town/city names can be entered with the
spelling used in any of the languages avail-
able on the Control Display.
20
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Voice activation system AT A GLANCE
The concept
> By using the voice activation system, most of
the functions that are displayed on the
ProCarManuals.com
Prerequisite
So that voice commands can be identified, set a
language on the Control Display that is sup-
ported by the voice activation system.
To set the language, see page 67.
2. Say the command.
Symbols in the Owner's Manual The command appears on the Control Dis-
play.
{...} Say the specified commands word for
This symbol is displayed on the Control Dis-
word.
play when you can enter additional commands.
{{...}} Indicates responses of the voice acti-
If no further commands are possible, continue
vation system.
by operating the item of equipment via the
onboard computer.
21
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
AT A GLANCE Voice activation system
22
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Voice activation system AT A GLANCE
3. "Speech mode:"
4. Select a setting:
> "Default"
> "Short"
Notes
ProCarManuals.com
23
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
ProCarManuals.com
Handle Me.
CONTROLS
DRIVING TIPS
ProCarManuals.com
NAVIGATION
ENTERTAINMENT
COMMUNICATIONS
MOBILITY
REFERENCE
Integrated key
Keys/remote controls
Buttons on the remote control
ProCarManuals.com
26
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Opening and closing CONTROLS
> Units of measure for fuel consumption, addition, the hazard warning flashers and inte-
distance covered/remaining distances rior lamps come on.
and temperature 62
> Light settings:
> Pathway lighting 82
Opening and closing:
> Daytime running lights 82 from outside
> Automatic climate control: activating/deac- Persons or animals in a parked vehicle
tivating the AUTO program, setting the tem- could lock the doors from the inside. Take
perature, air volume and air distribution 87 the key with you when you leave the vehicle so
> Entertainment: that the vehicle can be opened from the out-
side.<
> Audio volume 135
> Tone control 135 Using the remote control
Unlocking
Central locking system Press the button.
The welcome lamps and interior lamps come on.
The concept
The central locking system is ready for operation Unlocking mode
whenever the driver's door is closed. You can also set which parts of the car are
The system simultaneously engages and unlocked. The setting is stored for the remote
releases the locks on the following: control in use.
> Doors
> Tailgate
> Fuel filler flap
27
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
CONTROLS Opening and closing
2. "Door locks"
3. "Unlock button"
ProCarManuals.com
28
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Opening and closing CONTROLS
If the car can no longer be locked with a remote When there is no alarm system or Comfort
control, the battery in the remote control is dis- Access, only the driver's door is locked
charged. Use this remote control during an with the door lock.<
extended drive; this will recharge the battery, To lock all doors, the fuel filler flap, and the tail-
page 26. gate together:
> With the doors closed, press the interior cen-
For US owners only tral locking button, page 30, to lock the
The transmitter and receiver units comply with vehicle.
part 15 of the FCC/Federal Communications > Unlocking and opening the driver or passen-
Commission regulations. Operation is governed ger door, page 30.
by the following:
Lock the vehicle.
FCC ID:
ProCarManuals.com
29
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
CONTROLS Opening and closing
remains unlocked.
Locking
> Press the switch or Tailgate
> Press down the safety lock button of a door.
To avoid damage, make sure there is
To prevent you from being locked out, the
sufficient clearance before opening the
open driver's door cannot be locked using
tailgate.<
the lock button.
While driving, sharp objects or objects
Persons or animals in a parked vehicle
with edges may strike against the rear
could lock the doors from the inside. Take
window and damage the heating element for
the key with you when you leave the vehicle so
the rear window. Assure that there are no
that the vehicle can be opened from the out-
objects with sharp edges near the rear win-
side.<
dow.<
30
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Opening and closing CONTROLS
Press the top side of the MINI emblem, arrow, or > Switching on the hazard warning flashers
Press the button on the remote control
for approx. 1 second and then release it. The Arming and disarming
tailgate is unlocked.
General information
Closing Whenever the car is locked or unlocked, the
Make sure that the closing path of the tail- alarm system is armed or disarmed.
gate is clear; otherwise, injuries may
occur.< Door lock with armed alarm system
Take the remote control with you and do Because of the design, unlocking the door lock
not put it into the luggage compartment: may trigger the alarm in some countries.
otherwise, the remote control can be locked in To turn off the alarm, unlock the vehicle using
the vehicle when the tailgate is closed.< the remote control or switch on the ignition.
Panic mode
The handle recesses on the interior trim panel of You can activate the alarm system if you find
the tailgate make it easier to pull it down. yourself in a dangerous situation.
Press the button for at least two seconds.
Switching off the alarm:
Press any button.
31
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
CONTROLS Opening and closing
The vehicle's inclination is monitored. The alarm Comfort Access supports the following func-
is triggered, for instance, if an attempt is made tions:
to steal the vehicle's wheels or tow it away. > Unlocking/locking the vehicle
> Convenient closing
> Unlocking the tailgate separately
> Starting the engine
32
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Opening and closing CONTROLS
33
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
CONTROLS Opening and closing
34
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Opening and closing CONTROLS
Tilting Windows
> Press the switch backward to the resistance
point and hold it there. To prevent injuries, exercise care when
Both glass roofs are tilted. closing the windows.
Releasing the switch stops the movement. Take the remote control with you when you
leave the car; otherwise, children could operate
> With the ignition switched on, press the
the electric windows and possibly injure them-
switch backward beyond the resistance
selves.<
point.
Both closed roofs are tilted fully. If, after a window is opened and closed
Pressing again stops the movement. several times in close succession, the
window can only be closed and not opened, the
Opening, closing system is overheated. Let the system cool for
several minutes with the ignition switched on or
With the ignition switched on and the glass sun-
the engine running.<
roof tilted, press the switch backward and hold it
there.
Opening, closing
The front glass roof opens.
ProCarManuals.com
35
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
CONTROLS Opening and closing
36
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Adjustments CONTROLS
Adjustments
Vehicle equipment injuries can occur when the airbags are trig-
gered.<
In this chapter, all production, country, and Even if you follow all the instructions, injuries
optional equipment that is offered in the model resulting from contact with airbags cannot be
range is described. Equipment is also described fully excluded, depending on the circumstances.
that is not available because of, for example, The ignition and inflation noise may provoke a
selected options or country version. This also mild hearing loss in extremely sensitive individ-
applies to safety related functions and systems. uals. This effect is usually only temporary.
For airbag locations and additional information
on airbags, refer to page 78.
Sitting safely
The ideal sitting position can make a vital contri- Head restraint
bution to relaxed, fatigue-free driving. In con- A correctly adjusted head restraint reduces the
ProCarManuals.com
junction with the safety belts, the head restraints risk of neck injury in the event of an accident.
and the airbags, the seated position has a major Adjust the head restraint in such a way
influence on your safety in the event of an acci- that its center is at approx. ear level. Oth-
dent. To ensure that the safety systems operate erwise, there is an increased risk of injury in the
with optimal efficiency, we strongly urge you to event of an accident.<
observe the instructions contained in the follow-
Head restraints, refer to page 39.
ing section.
For additional information on transporting chil- Safety belt
dren safely, refer to page 44.
Before every drive, make sure that all occupants
wear their safety belts. Airbags complement the
Airbags
safety belt as an additional safety device, but
Always maintain an adequate distance they do not represent a substitute.
between yourself and the airbags. Always
grip the steering wheel on the rim, with your Number of safety belts
hands in the 3 o'clock and 9 o'clock positions, to
Never allow more than one person to
minimize the risk of injury to the hands or arms
wear a single safety belt. Never allow
in the event of the airbag being deployed.
infants or small children to ride in a passenger's
No one and nothing should come between the
lap.
airbags and the seat occupant.
Make sure that the belt in the lap area sits low
Do not use the cover of the front airbag on the
across the hips and does not press against the
front passenger side as a storage area. Ensure
abdomen. The safety belt must not rest against
that the front passenger is correctly seated, e.g.
the throat, run across sharp edges, pass over
that no feet or legs are propped against the
hard or fragile objects or be pinched. Fasten the
dashboard. Otherwise, leg injury could result if
safety belt so that it is pulled taut across the lap
the front airbag suddenly deployed.
and shoulder, fitting the body snugly without
Make sure that passengers keep their heads
any twists. Otherwise, the belt could slide over
away from the side airbag and do not lean
the hips in the event of a frontal collision and
against the cover of the head airbag, otherwise
37
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
CONTROLS Adjustments
Seats
Note before adjusting
Never attempt to adjust your seat while Pull up or push down the lever repeatedly,
the vehicle is moving. The seat could arrows 1, until the desired height is reached.
respond with unexpected movement, and the
ensuing loss of vehicle control could lead to an Backrest
accident.
On the front passenger seat as well, do not
ProCarManuals.com
Longitudinal direction
Pull the lever, arrow 1, and slide the seat into the
desired position, arrows 2.
After releasing the lever, move the seat slightly
forward or back so that it engages properly. Turn the wheel to increase or decrease the cur-
vature.
38
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Adjustments CONTROLS
Longitudinal adjustment
To raise: pull up.
To lower: Press the button, arrow 1, and slide
the head restraint down.
Removing
Only remove a head restraint if no one will be
ProCarManuals.com
Backrest
Adjustment of backrest angle, see page 102.
Head restraints
Correctly adjusted head restraint
A correctly adjusted head restraint reduces the Front
risk of neck injury in the event of an accident. 1. Pull up as far as it will go.
Correctly adjust the head restraints of all 2. Fold the backrest back slightly.
occupied seats; otherwise, there is an 3. Press button 1 and pull the head restraint
increased risk of injury in an accident.< out as far as it will go.
4. Also press button 2 with a suitable tool and
Height
completely remove the head restraint.
Adjust the head restraint so that its center is
5. Fold back the backrest.
approximately at ear level.
39
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
CONTROLS Adjustments
Closing
Make sure you hear the lock engage in the belt
Switching on buckle.
Press once for each temperature level. The upper belt anchor is suitable for adults of
Three LEDs indicate the highest temperature. any stature as long as the seat is adjusted prop-
If you continue driving within the next erly, page 38.
15 minutes, the seat heating is automatically
activated at the previously set temperature. Opening
The temperature is lowered or the heating is 1. Grasp the belt firmly.
switched off entirely to reduce the drain on the 2. Press the red button in the buckle.
battery.
The LEDs stay lit. 3. Guide the belt into its reel.
40
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Adjustments CONTROLS
Fastening
1 Large belt latch
2 Small belt latch
3 Small belt buckle
4 Large belt buckle
The belt latch 1 must be inserted into the belt
buckle 4. Make sure you hear the lock engage in
the belt buckle.
Insert the belt latch into the belt buckle so
Insert safety belt with small belt latch 2 into the that the safety belt is properly attached
small belt buckle 3. when a person is buckled in, and is not
twisted.<
41
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
CONTROLS Adjustments
Front seats
ProCarManuals.com
42
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Adjustments CONTROLS
43
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
CONTROLS Transporting children safely
44
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Transporting children safely CONTROLS
All rear safety belts and the safety belt for the
front passenger can be prevented from being
pulled out in order to secure child restraint sys-
The mounts for the lower LATCH anchors are
tems.
located at the points indicated by the arrows.
Locking the safety belt Make sure that both lower LATCH anchors
are properly engaged and that the child
ProCarManuals.com
LATCH child restraint The child restraint anchor fittings, see arrows,
fixing system are located behind the back of the rear seats.
45
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
CONTROLS Transporting children safely
The child restraint anchor fittings for the two 1 Forward driving direction
outer seats, see arrows, are located behind the
2 Head rest
back of the rear seats.
The child restraint anchor fitting for the center 3 Attaching clip
seat is located under the luggage-compartment 4 Child restraint anchor fitting
sill, position 4 in picture center seat. 5 Load area floor
ProCarManuals.com
6 Seat back
Placement of the tether strap
7 Strap of the child restraint system
Make sure the upper tether strap does not
run over sharp edges and is not twisted as
it passes to the top anchor. Otherwise, the strap
Attaching upper tether strap to the
will not properly secure the child restraint sys-
attachment point
tem in the event of an accident.< 1. Slide the head restraint upward.
Outer seats: 2. Center seat: fold the load area floor back-
wards
3. Guide the tether strap between the head
restraint holders.
4. Attach the tether strap to the anchor using
the hook.
5. Push the head restraint into its lowermost
position.
6. Pull the tether strap tight.
1 Direction of travel
2 Head restraint
3 Rear cargo well
4 Tether strap hook
5 Anchor
6 Seat backrest
7 Tether strap of the child restraint system
46
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Transporting children safely CONTROLS
only.
47
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
CONTROLS Driving
Driving
Ignition lock
Press the Start/Stop button to switch radio readi-
Inserting the key into the ignition lock ness or the ignition on and off. Do not depress
ProCarManuals.com
Insert the key all the way into the ignition lock. the brake or clutch while doing so.
Radio readiness If the Start/Stop button is pressed while
Individual electrical consumers can operate. the clutch is depressed in the manual
transmission or the brake pedal is depressed in
Removing the key from the ignition lock the automatic transmission, the engine starts.<
Press in the key briefly. It is ejected slightly.
At the same time: Radio readiness
> The ignition is switched off if it was on Individual electrical consumers can operate. The
beforehand. time and external temperature are displayed in
the tachometer.
Automatic transmission Radio readiness is switched off automatically:
The key can only be removed if the selector lever > When the key is removed from the ignition
is in position P: interlock. lock
> When using Comfort Access by pressing the
button on the door handle or the but-
ton on the remote control, refer to Locking
on page 33
> After a certain has elapsed
Ignition on
Most indicator and warning lamps in indicator
area 1, page 13, light up for varying lengths of
time.
When the engine is off, switch off the igni-
tion and any unnecessary electrical con-
sumers in order to preserve the battery.<
48
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Driving CONTROLS
49
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
CONTROLS Driving
Pull upward slightly, press the button, arrow, Removing the key
and guide the lever down. To remove the key from the ignition lock, first
In exceptional cases, if the parking brake move the selector lever into position P and then
has to be used to slow or stop the car, do switch off the engine: interlock. Remove the key
not pull the lever up too hard. In doing so, con- from the ignition lock, refer to page 48.
tinuously press the button of the parking brake
50
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Driving CONTROLS
N Neutral
Select this when you are in a car wash, for exam-
ple. The vehicle can roll.
position D.
Changing selector lever positions
> The selector lever can only be moved out of Kickdown
position P when the ignition is switched on Kickdown enables you to achieve maximum
or the engine is running. performance.
> Before moving the lever away from P or N Depress the accelerator pedal beyond the full-
with the vehicle stationary, first depress the throttle resistance point.
brake; otherwise, the selector lever will
refuse to move: shiftlock. Sport program and manual mode M/S
To prevent the vehicle from creeping
after you select a driving position,
depress the brake until you are ready to
start.<
A lock prevents accidental shifting into selector
lever positions R and P.
51
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
CONTROLS Driving
Shifting with the selector lever Manually releasing the selector lever
Push the selector lever forward or pull it back to lock
activate manual operation. Steptronic shifts the Should the selector lever refuse to move out of
gear. position P even though the ignition is switched
> Pull the selector lever in the + direction. on, the brake is depressed and the button on the
Transmission shifts up. selector lever is pressed, the selector lever lock
can be overridden:
> Push the selector lever in the – direction.
Transmission shifts down. 1. Unclip the sleeve of the selector lever.
The selected gear is displayed in the tachome- 2. Pull the sleeve up over the selector lever
ter, e.g. M1. until the sleeve is inside out. Disconnect the
cable connector if necessary.
To use the automatic mode again, move the
selector lever to the right into position D.
Upshifts and downshifts are executed only when
they will result in a plausible combination of
engine and vehicle speed; thus, for example, a
ProCarManuals.com
Shifting on the steering wheel 3. Insert extractor hook 1 into the loop on the
With the selector lever in position D, automatic passenger's side.
drive, you can shift gears using the shift paddles The extractor hook is in the onboard
on the steering wheel. The transmission auto- document holder or in the pouch for
matically switches to manual mode. the tire-changing set, page 219.<
If you do not shift gears with the shift paddles or 4. Pull the loop up.
accelerate for a certain amount of time, the
5. Move the selector lever into the desired
transmission automatically returns to D, auto-
position by pressing the button on the front
matic drive.
of the selector lever.
Before manually unlocking the selector
lever lock, firmly set the parking brake to
prevent the vehicle from rolling away.<
52
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Driving CONTROLS
Turn signals/ The setting is stored for the remote control cur-
rently in use.
headlamp flasher
Wiper system
Do not turn on the wipers when they are
frozen; otherwise, the wiper blades and
the windshield wiper motor may be damaged.<
Do not use the windshield wipers when
the windshield is dry; otherwise the wiper
blades may wear out faster or be damaged.<
1 Turn signal
2 Headlamp flasher
53
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
CONTROLS Driving
Intermittent wipe or rain sensor 4. Press the button as often as necessary until
If the car is not equipped with a rain sensor, the the symbol and "SET" are displayed.
intermittent-wipe time is preset.
If the car is equipped with a rain sensor, the time
between wipes is controlled automatically and
depends on the intensity of the rainfall. The rain
sensor is mounted on the windshield, directly in
front of the interior rearview mirror.
Brief wipe
Press the lever downward once, arrow 2.
3. Press and hold the button until the display Cleaning windshield and headlamps
changes. Pull the lever, arrow 4.
Washer fluid is sprayed onto the windshield and
the wipers are operated briefly.
When the vehicle lighting system is switched on,
the headlamps are cleaned at regular and
appropriate intervals.
54
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Driving CONTROLS
In cars equipped with an alarm system, the Do not use the washers when the washer
headlamps cannot be cleaned when the hood is fluid reservoir is empty; otherwise, you will
open. damage the washer pump.<
Do not use the washers when the washer
fluid reservoir is empty; otherwise, you will
damage the washer pump. Washer fluid
Only use the washers if the hood has been com-
Washer fluid is flammable. Keep it away
pletely closed; otherwise, the headlamp washer
from ignition sources, only store it in the
system may be damaged. Do not use the wash-
closed, original container, and keep out of reach
ers if there is any danger that the fluid will freeze
of children; otherwise, there is a danger of
on the windshield. If you do, your vision could be
injury. Comply with the instructions on the con-
obscured. For this reason, use antifreeze.<
tainer.<
Window washer nozzles
Washer fluid reservoir
The window washer nozzles are heated auto-
Only refill washer fluid that contains anti-
matically while the engine is running or the igni-
freeze when the engine is cool, to avoid
tion is switched on.
ProCarManuals.com
55
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
CONTROLS Driving
Do not use cruise control when driving at > The stability control system is on
constant speed is prevented by adverse Cruise control is not deactivated by depressing
conditions, e.g. winding roads, dense traffic or the accelerator pedal. Once the accelerator
poor road conditions due to, e.g. snow, rain, ice pedal is released, the stored speed is achieved
or loose surfaces. Otherwise, you could lose con- again and maintained.
trol of the vehicle and cause an accident as a The stored speed is cleared when the ignition is
result.< switched off.
Increasing speed
Press button 3 repeatedly until the desired
speed is reached. Every time you press the but-
ton, the speed increases by approx. 1 mph or
1 Resuming cruise control 1 km/h.
2 Activating/deactivating cruise control
Accelerating using the button
3 Maintaining, storing and increasing speed
Press and hold button 3.
4 Maintaining, storing and decreasing speed
The vehicle accelerates without pressure on the
Indicator lamp in the speedometer lights up. The
accelerator pedal. After the button is released,
cruise control system is ready and can be acti-
the driving speed is maintained and stored.
vated.
Decreasing speed
Press button 4 repeatedly until the desired
speed is reached.
The functions here are the same as for increas-
ing the speed or accelerating, except that the
speed will be decreased.
56
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Driving CONTROLS
Display on tachometer
ProCarManuals.com
Malfunction
The warning lamp in the tachometer
lights up if the system fails. A message
appears on the Control Display.
57
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
CONTROLS Controls overview
Controls overview
Reserve
Once the fuel level has fallen to the reserve zone
1 Current vehicle speed
of approx. 2.1 US gal/8 liters the remaining LEDs
change from orange to red, arrow, and a mes- 2 Odometer in kilometers, trip recorder,
sage is displayed briefly on the Control Display. external temperature, time
The tachometer displays the remaining cruising 3 Resetting the trip odometer
range. When the range is less than approx.
Press button on turn signal indicator to call up
30 miles/50 km, the message remains in the
information in the display area 2.
Control Display.
58
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Controls overview CONTROLS
Trip odometer
To display trip recorder:
Briefly press button 3.
Resetting the trip odometer:
While the trip recorder is displayed and the igni-
tion is switched on, press button 3.
Press the button in the turn signal lever repeat-
Time edly to call up various items of information.
To set time, see page 64. The following information is displayed sequen-
tially:
ProCarManuals.com
59
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
CONTROLS Controls overview
Average speed
Periods with the vehicle parked and the engine
switched off are not included in the calculations
of average speed.
With the trip computer, page 60, you can have > Departure time
the average speed for another trip displayed.
> Trip duration
To reset average speed: press the button in the
> Trip distance
turn signal lever for approx. 2 seconds.
Both displays show:
Displays on the Control Display > Average fuel consumption and
ProCarManuals.com
60
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Controls overview CONTROLS
Exiting displays
1 Button for:
> Selecting display 1. Press the button in the turn signal lever
repeatedly until "HOME" is displayed.
> Setting values
2. Press the button for a longer period.
> Confirming selected display or set values
Displays are also exited if no entries are made
> Calling up computer information 59
for approx. 8 seconds.
ProCarManuals.com
Symbol Function
Next setting or item of information
Adjusting rain sensor 54
Calling up Check
Control 65
61
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
CONTROLS Controls overview
Symbol Function
Engine oil
ProCarManuals.com
Front brakes
Service requirements
Rear brakes
62
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Controls overview CONTROLS
Symbols
No service is currently required.
Next setting or item of
information 61 The deadline for service or a legally man-
ProCarManuals.com
3. "Service required"
63
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
CONTROLS Controls overview
64
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Controls overview CONTROLS
65
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
CONTROLS Controls overview
In urgent cases, this information will be shown 1. Press the button in the turn signal indicator
as soon as the corresponding lamp lights up. as often as necessary until "SET/INFO" is dis-
Exit display: played.
"OK" 2. Press and hold the button until the display
changes.
Hiding Check Control messages
3. Press the button repeatedly until the corre-
sponding symbol and "CHECK INFO" appear
in the display.
66
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Controls overview CONTROLS
Altering settings
Language on the Control Display
1. "Settings"
67
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
CONTROLS Controls overview
The setting is stored for the remote control cur- 5. Press the MINI joystick.
rently in use. The setting is stored for the remote control cur-
rently in use. In bright conditions, for example,
Setting the voice dialog the brightness control may not be clearly visible.
Switch between a standard dialog and a short
dialog.
1. "Settings"
2. "Language/Units"
3. "Speech mode:"
4. Select the desired dialog.
ProCarManuals.com
68
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Technology for driving comfort and safety CONTROLS
69
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
CONTROLS Technology for driving comfort and safety
enter the sensors' blind spots before or after a force. Thus, the system helps keep braking dis-
continuous audible signal is given. Higher, pro- tance to a minimum. At the same time, all the
truding objects, such as wall ledges, may not be benefits provided by ABS are exploited.
detectable. Therefore, always drive cautiously; Do not reduce the pressure on the brake for the
otherwise, there is a risk of personal injury or duration of the full braking application.
property damage. Loud sound sources outside
or inside the car can drown out the PDC signal.< Dynamic Stability Control DSC
The concept
Driving stability control DSC prevents the driving wheels from losing
systems traction when you pull away from rest or accel-
erate.
Your MINI has a number of systems that help to
DSC also detects unstable driving conditions
maintain the vehicle's stability even in adverse
such as when the vehicle's rear end fishtails or
driving conditions.
the vehicle is sliding on its front wheels. In these
The laws of physics cannot be repealed, cases, DSC helps the vehicle maintain a safe
even with driving stability control systems.
ProCarManuals.com
Deactivating DSC
Antilock Brake System ABS
ABS prevents locking of the wheels during brak-
ing. Safe steering response is maintained even
during full braking. Active safety is thus
increased.
Braking safely, refer to page 101.
ABS is operational every time you start the
engine.
70
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Technology for driving comfort and safety CONTROLS
71
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
CONTROLS Technology for driving comfort and safety
Hill Assist
Hill Assist aids you in comfortably driving off on
inclines. It is not necessary to use the parking
brake for this.
1. Hold the MINI with the brake.
2. Release the brake and immediately drive
off.
Hill Assist holds the car in place for approx. Press the button.
2 seconds after the brake is released. The LED lights up.
Depending on the load and gradient, the SPORT is briefly displayed in the tachometer.
vehicle can roll backward slightly during
this period. After you release the brake, immedi- Deactivating the system
ately start driving since the Hill Assist only holds > Press the button again.
the vehicle for about 2 seconds, and it will start
> Switch off the engine.
to roll backward.<
72
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Technology for driving comfort and safety CONTROLS
reliable signaling of a flat tire is not ensured. Do not initialize the system when driving with
Initialize the system after every correction of the snow chains.
tire inflation pressure and after every tire or 1. "Vehicle Info"
wheel change. 2. "Vehicle status"
> Snow chains are attached The initialization is completed during driv-
ing, which can be interrupted at any time.
Status display When driving resumes, the initialization is con-
The current status of the Flat Tire Monitor can be tinued automatically.<
displayed on the Control Display, e.g. whether or
not the FTM is active. Indication of a flat tire
The warning lamps come on in yellow
1. "Vehicle Info"
and red. A message appears on the
2. "Vehicle status" Control Display. An acoustic signal also
3. "Flat Tire Monitor" sounds.
73
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
CONTROLS Technology for driving comfort and safety
There is a flat tire or a major loss in tire inflation 3. At the next opportunity, check the air pres-
pressure. sure in all four tires.
1. Reduce speed and stop the vehicle with cau- If the inflation pressure in all four tires is cor-
tion. Avoid sudden braking and steering rect, the Flat Tire Monitor might not have
maneuvers. been initialized. The system must then be
2. Check whether the vehicle is equipped with initialized.
normal tires or with run-flat tires. Possible driving distance with complete loss of
Run-flat tires, refer to page 200, are identi- tire inflation pressure:
fied by a circular symbol containing the let- The distance it is possible to drive depends on
ters RSC on the tire sidewall. the load and the stress on the vehicle while
If the vehicle is not equipped with run-flat driving.
tires, do not continue driving; continuing With an average load, it may be possible to drive
to drive can result in serious accidents.< for approx. 50 miles/80 km.
When a flat tire is reported, the Dynamic Stability When driving with damaged tires, the handling
Control DSC is activated. characteristics change, e.g. the vehicle will skid
sooner when braking, braking distances will be
ProCarManuals.com
Actions in the event of a flat tire longer, or self-steering response will change.
Adapt your driving style accordingly. Avoid turn-
Normal tires ing abruptly and driving over obstacles such as
1. Identify the damaged tire. curbs, potholes, etc.
To do so, check the inflation pressure in all Since the possible driving distance depends to a
four tires. considerable degree on the strain exerted on
The inflation pressure display of the Mobility the vehicle while driving, it can be shorter or,
Kit, page 216, can be used for this purpose. with a gentle driving style, can also be longer,
depending on the speed, road condition, exter-
If the inflation pressure in all four tires is cor-
nal temperature, vehicle load, etc.
rect, the Flat Tire Monitor might not have
been initialized. The system must then be Drive cautiously and do not exceed a
initialized. speed of 50 mph/80 km/h.
A loss of tire inflation pressure results in a
If it is not possible to identify the damaged
change in the handling characteristics, e.g.
tire, contact your MINI dealer
reduced lane stability during braking, a longer
2. Use the Mobility Kit to remedy the flat tire on braking distance and altered self-steering prop-
the damaged wheel, refer to page 216. erties.<
Vibrations or loud noises while driving can
Run-flat tires indicate final failure of the tire. Reduce
You can continue driving with a damaged tire at your speed and bring the vehicle to a stop;
speeds up to 50 mph or 80 km/h. otherwise, pieces of tire may come off, which
could result in an accident. Do not continue
Continued driving with a flat tire driving and contact your MINI dealer.<
When driving with a damaged tire:
1. Avoid sudden braking and steering maneu-
vers.
2. Do not exceed a speed of 50 mph or
80 km/h.
74
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Technology for driving comfort and safety CONTROLS
Functional requirement
The status is displayed.
The system must have been reset while the
inflation pressure was correct; otherwise, reli- Status indicator on the onboard
able signaling of a flat tire is not ensured. computer
Always use wheels with TPM electronics to The tire and system condition is indicated by the
ensure that the system will operate properly. color of the tires.
Reset the system again after each correction of A change in the tire inflation pressure during
ProCarManuals.com
the tire inflation pressure and after every tire or driving is taken into account.
wheel change.
A correction is only required when this is indi-
cated by the TPM.
System limitations
Sudden, serious tire damage caused by Green wheels
external influences cannot be indicated in The inflation pressure corresponds to the
advance.< desired state.
The system does not operate correctly if it has "TPM active" is displayed on the onboard com-
not been reset. For example, a flat tire may be puter.
indicated despite correct tire inflation pressures.
The system is inactive and cannot indicate a flat One wheel yellow
tire: There is a flat tire or substantial loss of tire pres-
> If a wheel without TPM electronics is sure in the indicated tire.
mounted
All wheels yellow
> Interference with TPM by other systems or
> There is a flat tire or substantial loss of tire
devices with the same transmission fre-
pressure in one or more tires.
quency.
> The system was not reset after a wheel
Status display change and thus issues a warning based on
the inflation pressures initialized last.
The current status of the Tire Pressure Monitor
can be displayed by the onboard computer, e.g. Gray wheels
whether or not the TPM is activated.
The system cannot detect a puncture.
1. "Vehicle Info"
Reasons for this may be:
2. "Vehicle status"
> TPM is being reset.
3. "Tire Pressure Monitor - TPM"
> Interference from systems or devices with
the same transmission frequency.
> Malfunction.
75
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
CONTROLS Technology for driving comfort and safety
Resetting system > The system was not reset after a wheel
Reset the system again after each correction of change and thus issues a warning based on
the tire inflation pressure and after every tire or the inflation pressures initialized last.
wheel change. 1. Reduce speed and stop the vehicle with cau-
1. "Vehicle Info" tion. Avoid sudden braking and steering
maneuvers.
2. "Vehicle status"
2. Check whether the vehicle is equipped with
3. "Reset"
normal tires or with run-flat tires.
Run-flat tires, refer to page 200, are identi-
fied by a circular symbol containing the let-
ters RSC on the tire sidewall.
When a low inflation pressure is reported, the
Dynamic Stability Control DSC is activated.
Normal tires
4. Start the engine – do not drive away. 1. Identify the damaged tire.
5. Select "Reset" to start the initialization. To do so, check the inflation pressure in all
6. Start to drive. four tires. The inflation pressure display of
The tires are shown in gray and "Resetting the Mobility Kit, page 216, can be used for
TPM..." is displayed. this purpose.
After driving a few minutes, the set inflation If the inflation pressure is correct in all four
pressures in the tires are accepted as the target tires, then the Tire Pressure Monitor may not
values to be monitored. The resetting process is have been reset. The system must then be
completed automatically as you drive. The tires reset.
are depicted in green on the Control Display and If it is not possible to identify the damaged
"Status: TPM active" is displayed again. tire, contact your MINI dealer.
The trip can be interrupted at any time. When 2. Use the Mobility Kit to remedy the flat tire on
driving resumes, resetting is continued auto- the damaged wheel, refer to page 216.
matically. The use of tire sealant, e.g. Mobility Kit, can
If a flat tire is detected while the system is damage the TPM wheel electronics. In this
resetting, all tires on the Control Display case, have the electronics checked and
are displayed in yellow. The message "Low tire!" replaced if necessary at your earliest oppor-
is displayed.< tunity.
76
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Technology for driving comfort and safety CONTROLS
Continued driving with a flat tire which could result in an accident. Do not con-
When driving with a damaged tire: tinue driving and contact your MINI dealer.<
1. Avoid sudden braking and steering maneu-
Malfunction
vers.
The small warning lamp flashes in yel-
2. Do not exceed a speed of 50 mph or
low and then lights up continuously; the
80 km/h.
larger warning lamp lights up in yellow.
3. At the next opportunity, check the air pres- On the onboard computer, the tires are
sure in all four tires. shown in gray and a message appears.
If the inflation pressure is correct in all four No flat tire can be detected.
tires, then the Tire Pressure Monitor may not
Display in the following situations:
have been reset. The system must then be
reset. > Wheel without TPM electronics is mounted:
If need be, have it checked by your MINI
Possible driving distance with complete loss of
dealer.
tire inflation pressure:
> Malfunction:
The distance it is possible to drive depends on
Have the system checked
ProCarManuals.com
77
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
CONTROLS Technology for driving comfort and safety
Declaration according to NHTSA/ ability. Please note that the TPMS is not a substi-
FMVSS 138 Tire Pressure Monitoring tute for proper tire maintenance, and it is the
Systems driver's responsibility to maintain correct tire
Each tire, including the spare, should be pressure, even if underinflation has not reached
checked monthly when cold and inflated to the the level at which the TPMS low tire pressure tell-
inflation pressure recommended by the vehicle tale illuminates.
manufacturer on the vehicle placard or tire infla- The TPMS malfunction indicator is combined
tion pressure label. If your vehicle has tires of a with the low tire pressure telltale. When the sys-
different size than the size indicated on the vehi- tem detects a malfunction, the telltale will flash
cle placard or tire inflation pressure label, you for approximately one minute and then remain
should determine the proper tire inflation pres- continuously lit. This sequence will continue
sure for those tires. As an added safety feature, upon subsequent vehicle startups as long as the
your vehicle has been equipped with a tire pres- malfunction exists. When the malfunction indi-
sure monitoring system TPMS that illuminates a cator is illuminated, the system may not be able
low tire pressure telltale when one or more of to detect or signal low tire pressure as intended.
your tires are significantly underinflated. TPMS malfunctions may occur for a variety of
Accordingly, when the low tire pressure telltale reasons, including the installation of replace-
ProCarManuals.com
illuminates, you should stop and check your tires ment or alternate tires or wheels on the vehicle
as soon as possible, and inflate them to the that prevent the TPMS from functioning prop-
proper pressure. Driving on a significantly erly. Always check the TPMS malfunction telltale
underinflated tire causes the tire to overheat after replacing one or more tires or wheels on
and can lead to tire failure. Underinflation also your vehicle to ensure that the replacement or
reduces fuel efficiency and tire tread life, and alternate tires and wheels allow the TPMS to
may affect the vehicle's handling and stopping continue to function properly.
Airbags
78
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Technology for driving comfort and safety CONTROLS
The front airbags help protect the driver and Warning notices and information about the air-
front passenger by responding to frontal bags can also be found on the sun visors.
impacts in which safety belts alone cannot pro-
vide adequate restraint. When needed, the head Automatic deactivation of the front
and side airbags help provide protection in the passenger airbags
event of side impact. The relevant side airbag The presence of a passenger in the front passen-
supports the side upper body area. The head air ger seat is detected by measuring the resistance
bag supports the head. of the human body. The system correspondingly
The airbags are designed to not be triggered in activates or deactivates the front, side, and knee
every type of collision, e.g. not in minor acci- airbags for the front passenger.
dents, certain rollover situations or rear impacts. Make sure that the front passenger's feet
Do not apply adhesive materials to the remain in the footwell; otherwise, it is not
ProCarManuals.com
cover panels of the airbags, cover them or possible to guarantee the function of the front
modify them in any other way. passenger airbags.<
Keep the dashboard and window on the passen- The indicator lamp above the interior rearview
ger side free from obstruction, i.e. do not cover it mirror shows the current status of the front pas-
with adhesive film or coverings, and do not affix senger airbags, deactivated or activated, refer to
any holders such as for a navigation device or a Status of front passenger airbags below.
mobile phone.
Before transporting a child on the front
Do not attach seat covers, cushions or other
passenger seat, read the safety informa-
objects not specifically approved for seats with
tion and follow the instructions under Transport-
integral side airbags to the front seats. Do not
ing children safely, page 44.<
hang items of clothing such as coats or jackets
over the backrests. Do not attempt to remove
the airbag retention system from the vehicle. Do
Malfunction of the automatic
not modify the individual components of the
deactivation
system or its wiring in any way. This includes the When teenagers and adults assume certain sit-
upholstery in the center of the steering wheel, ting positions, this can cause the front, side, and
on the instrument cluster, the doors, and the knee airbags to deactivate. The indicator lamp
roof pillars as well as the sides of the headliner. for the front passenger airbags lights up when
Do not attempt to remove or dismantle the this occurs. In such cases, the passenger should
steering wheel.< change his or her sitting position so that the
front passenger airbags are activated and the
Do not touch the individual components
indicator lamp goes out. If the desired airbag
immediately after the system has been
status cannot be achieved by changing the sit-
triggered, because there is a danger of burns.
ting position, transport the relevant passenger
Have the testing, repair, removal, and disposal on a rear seat.
of airbag generators executed only by your MINI
> Do not attach covers, cushions, ball mats or
dealer or a workshop that has the required
other items to the front passenger seat
explosives licenses.
unless they are specifically recommended
by the manufacturer of your MINI.
79
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
CONTROLS Technology for driving comfort and safety
> Do not place items on the front passenger Operational readiness of airbag system
seat.
> Do not place items under the seat which
could press against the seat from below.
The indicator lamp for the front passenger air- Airbag system malfunction
ProCarManuals.com
bags shows the functional status of the front > The warning lamp does not come on when
passenger's front, side, and knee airbags in radio readiness is switched on.
accordance with whether and how the front > The warning lamp stays lit continuously.
passenger seat is occupied. The indicator lamp
In the event of a fault in the airbag system,
shows whether the front passenger airbags are
have it checked without delay; otherwise,
activated or deactivated.
there is the risk that the system will not function
> The indicator lamp lights up when a child in as intended even if a severe accident occurs.<
a specially designated child restraint system
is properly detected on the seat or the seat is
unoccupied.
The front, side, and knee airbags for the
front passenger are not activated.
Most child seats are detected by the
system. This particularly applies to
child seats that were required by NHTSA at
the time of manufacture of the vehicle. After
installing a child seat, check that the indica-
tor lamp for the front passenger airbags
lights up. It indicates that the child seat has
been detected and that the front passenger
airbags are deactivated.<
> The indicator lamp does not come on as long
as a person of sufficient size and in a correct
sitting position is detected on the seat.
The front, side, and knee airbags for the
front passenger are activated.
80
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Lamps CONTROLS
Lamps
81
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
CONTROLS Lamps
function
1. "Settings"
2. "Lighting"
3. "Pathway light.:"
The setting is stored for the remote control cur-
4. Set a time of duration or deactivate the func- rently in use.
tion.
82
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Lamps CONTROLS
High beams/
roadside parking lamps
Switching off
Press the lever up or down to the pressure point.
83
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
CONTROLS Lamps
Adjusting brightness
> Briefly press button: Brightness changes in
stages.
> Press and hold the button. Brightness
changes in a continuous manner.
Interior lamps
The interior lamps, the footwell lamps, the entry
To switch the reading lamps on and off.
lamps, and the cargo area lamp are controlled
automatically. In the front: Press the switch.
To reduce the drain on the battery, a short In the rear: Press the button.
while after the ignition is switched off,
refer to Start/Stop button on page 48, all lights in Ambient lighting
the vehicle's passenger compartment are
ProCarManuals.com
switched off.<
84
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Climate CONTROLS
Climate
Vehicle equipment
In this chapter, all production, country, and that is not available because of, for example,
optional equipment that is offered in the model selected options or country version. This also
range is described. Equipment is also described applies to safety related functions and systems.
ProCarManuals.com
85
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
CONTROLS Climate
Air conditioner
86
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Climate CONTROLS
87
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
CONTROLS Climate
Most settings are stored for the remote control The recirculated-air mode should not be used
currently in use, refer also to Personal Profile set- over an extended period of time; otherwise, the
tings on page 27. air quality in the passenger compartment will
deteriorate continuously.<
Air flow rate, manual
Press the – button to reduce air flow. Press Maximum cooling
the + button to increase it. You will receive maximally cooled
You can reactivate the automatic mode air as quickly as possible when the
for the air flow rate with the AUTO button. outside temperature is above
327/06 and while the engine is running.
The air flow rate is lowered or switched off
entirely to reduce the drain on the battery. The The automatic climate control goes into recircu-
display remains the same. lated-air mode at the lowest temperature. Air
flows at maximum rate from the vents for the
Switching the system on/off upper body area. You should therefore open
them for maximum cooling.
Reduce the air flow by pressing the – button
repeatedly until the system is switched off. All
Air distribution, manual
ProCarManuals.com
displays go out.
The flow of air is directed to the
Press the AUTO button to switch the automatic
windows, to the upper body area or
climate control back on.
to the footwell as selected.
88
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Climate CONTROLS
Windshield heating
The windshield heating is switched Ventilation
off automatically after a certain
time.
Cooling function
ProCarManuals.com
Button Function
89
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
CONTROLS Practical interior accessories
Integrated universal
remote control
ProCarManuals.com
The concept
By using the integrated universal remote con-
trol, up to 3 functions of remote controlled
devices, e.g., garage door openers or lighting 1 LED
systems, can be operated. As a result, the uni-
2 Memory buttons
versal remote control can replace up to 3 differ-
ent remote controls. To operate, the buttons on 3 Hand-held transmitter
the rearview mirror must be programmed with
the desired functions. For programming, the Programming
remote control for each device is needed.
General information
To prevent possible damage or injury,
before programming or using the inte- 1. Switch on ignition.
grated universal remote control, always inspect 2. Initial startup:
the immediate area to make certain that no Press and hold the right and left buttons on
people, animals or objects are within the travel the rearview mirror for approx. 20 seconds
range of the device. until the LED on the rearview mirror starts
Comply also with the safety instructions supplied flashing quickly. All the programming for the
with the original hand-held transmitter.< buttons on the rearview mirror is deleted.
Before selling the vehicle, delete the stored 3. Hold the original hand-held transmitter at a
functions as a safety precaution, page. distance of approx. 1 in/2.5 cm to 3 in/8 cm
from the buttons on the rearview mirror. The
Checking compatibility required distance depends on the hand-
Depending on your vehicle's equip- held transmitter.
ment, the glove compartment can be 4. Press both the desired function on the
ventilated and, if the cooling function is remote and the button to be programmed
switched on, can also be cooled. on the rearview mirror at the same time. The
For additional information, please contact your LED flashes slowly at first.
MINI dealer or call: 1-800-355-3515.
90
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Practical interior accessories CONTROLS
91
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
CONTROLS Practical interior accessories
92
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Practical interior accessories CONTROLS
ProCarManuals.com
> Not all cardinal directions are displayed. Press the setting button for approx. 12-
13seconds. Briefly press the setting button again
Procedure to switch between English "E" and German "O".
1. Make sure that there are no large metal The setting is automatically stored after approx.
objects or overhead power lines near your 10 seconds.
vehicle, and that you have enough space to
drive in circles.
2. Set the compass zone that currently applies.
3. Press the setting button approx. 6-7 seconds
to call up C. Then drive in a complete circle at
a maximum speed of 4 mph/7 km/h.
If the calibration is successful, the C will be
replaced by the directions.
93
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
CONTROLS Practical interior accessories
Center armrest
The center armrest between the front seats con-
Opening tains either a compartment or the cover for the
Rotate the switch in the direction of the arrow. snap-in adapter, see page 167.
In the center armrest between the back seats,
there is a storage compartment.
94
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Practical interior accessories CONTROLS
Storage compartments
Center armrest rear Do not put any unsecured objects into the
interior of the vehicle; otherwise these
Removing may endanger the occupants, e.g., during brak-
The center armrest in the rear can be removed ing and evasive maneuvers.<
to increase the amount of storage room.
ProCarManuals.com
Center Rail
2. Push center armrest in the base plate gently On the Center Rail, a variety of accessories can
towards the back, arrow 2. be fastened to a special base plate and moved
to various positions, e.g. a cupholder or a mobile
3. Raise the armrest in front and swing out. phone holder.
Do not use accessory parts near the hand
Installing
brake; otherwise these could be damaged
1. Insert center armrest in the back into the when the hand brake lever is operated.<
rear recess of the base plate, arrow 1.
On the rail: Cupholder
Only install and move the cupholder in the rear,
between the rear seats.
95
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
CONTROLS Practical interior accessories
96
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Practical interior accessories CONTROLS
Connecting electrical
appliances
In your MINI, when the engine is running or if the
ignition is switched on, you can use electrical
Cupholders
devices such as flashlights, car vacuum cleaners,
Use lightweight, nonbreakable containers etc., up to approx. 140 watts at 12 volts, as long
and do not transport hot beverages. Oth- as one of the following sockets is available.
erwise, there is an increased risk of injury in the Avoid damaging the sockets by attempting to
event of an accident.< insert plugs of unsuitable shape or size.
ProCarManuals.com
Emptying
Remove the entire ashtray.
Lighter
97
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
ProCarManuals.com
Drive Me.
CONTROLS
DRIVING TIPS
ProCarManuals.com
NAVIGATION
ENTERTAINMENT
COMMUNICATIONS
MOBILITY
REFERENCE
in order to achieve the optimal service life and Following part replacement
economy of operation for your vehicle. The same break-in procedures should be
observed if any of the components mentioned
Engine and differential above have to be renewed in the course of the
Always obey all official speed limits. vehicle's operating life.
Up to 1,200 miles/2,000 km
Drive at varying engine and road speeds, but do
General driving notes
not exceed the following:
Closing tailgate
> Gasoline engine
4,500 rpm or 100 mph/160 km/h Only drive with the tailgate closed. Failure
to do so may endanger passengers or
Avoid full-throttle operation and use of the
other road users or may damage the vehicle in
transmission's kickdown mode.
the event of an accident or a braking and eva-
sive maneuver. In addition, exhaust gas may
After driving 1,200 miles/2,000 km
flow into the passenger compartment.<
Engine and vehicle speeds can be gradually
If special circumstances make it absolutely nec-
increased.
essary to drive with the tailgate open:
100
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Things to remember when driving DRIVING TIPS
reduce road speed. If you do not, a wedge securely fastened again after they have been
of water can form between tires and road sur- removed, e.g. for cleaning.<
face. This situation, known as hydroplaning, can
cause partial or complete loss of tire contact Driving in wet conditions
with the road surface, so that the car cannot be When roads are wet or there is heavy rain, briefly
steered or braked properly.< exert gentle pressure on the brake pedal every
The risk of hydroplaning increases with declining few miles. Monitor traffic conditions to ensure
tread depth on the tires, refer also to Tread that this maneuver does not endanger other
depth on page 199. road users. The heat generated in this process
helps dry the pads and rotors to ensure that.
Then full braking force will be immediately avail-
Driving through water
able when it is needed.
Drive through water on the road only if it is
not deeper than 1 ft/30 cm, and then only Hills
at walking speed at the most. Otherwise, the
To prevent overheating and the resulting
vehicle's engine, the electrical systems and the
reduced efficiency of the brake system,
transmission may be damaged.<
drive long or steep downhill gradients in the
gear in which the least braking is required. Even
Parking brake on inclines light but consistent brake pressure can lead to
On inclines, do not hold the vehicle with high temperatures, brake wear and possibly
the clutch; use the parking brake. Other- even brake failure.<
wise, greater clutch wear will result.<
You can increase the engine's braking effect by
For information on driving off using Hill Assist, shifting down, all the way to first gear if neces-
refer to page 72. sary. This strategy helps you avoid placing
excessive loads on the brake system. Downshift-
Braking safely ing in manual mode of the automatic transmis-
Your MINI is equipped with ABS. If you are in a sion, page 51.
situation which requires full braking, it is best to Never drive with the clutch held down,
brake using maximum brake pressure. Since the with the transmission in neutral or with
101
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
DRIVING TIPS Things to remember when driving
the engine switched off; otherwise, engine brak- Expanding cargo area
ing action will not be present or there will be no
power assistance to the brakes or steering.
Cargo area cover
Never allow floor mats, carpets or any other
objects to protrude into the area around the Do not place any objects on the cover;
pedals; otherwise, pedal function could be otherwise, they could endanger the car's
impaired.< occupants, e.g. in the case of braking or sudden
swerving, or they may damage the cover.<
Corrosion on brake rotors When you open the tailgate, the roll-up cover is
When the vehicle is driven only occasionally, raised.
during extended periods when the vehicle is not To load bulky luggage, the cover can be
used at all, and in operating conditions where removed.
brake applications are less frequent, there is an 1. Unhook the lift straps from the tailgate.
increased tendency for corrosion to form on
2. Lift the cover slightly, arrow 1, and pull it
rotors, while contaminants accumulate on the
rearward out of the bracket, arrow 2.
brake pads. This occurs because the minimum
pressure which must be exerted by the pads
ProCarManuals.com
102
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Things to remember when driving DRIVING TIPS
Open the center belt and insert in the take-up Cargo area privacy screen
on the headliner, see page 41. Between the cargo area and the rear seat back-
Expand the cargo area by raising the rear seat rest, there is a cargo area privacy screen. It can
backrests to a steeper angle. be folded down and used as a loading platform.
The backrests can be adjusted as needed in When the rear seat backrests are folded
10 stages between a comfort position and a down, do not fold the privacy screen
transport position or can be folded down. upright. In an accident, cargo could fold down
In the comfort position, the backrests are as far the privacy screen and damage it.<
back as possible; in the transport position, they
are in an approximately vertical position. Folding down the privacy screen
Before installing a child restraint system, 1. If necessary, remove the cargo area cover,
observe the instructions starting on page 44. refer to page 102.
2. Fold the privacy screen up and to the rear,
arrow 1.
ProCarManuals.com
103
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
DRIVING TIPS Things to remember when driving
Removing Removing
1. Removing cargo area cover, page 102. If necessary, the load floor can be removed.
2. Fold the privacy screen up and to the rear 1. Fold load floor together.
and unlock it, refer to Folding the privacy 2. Pull the load floor back slightly out of the
screen forward. take-up.
3. Remove it from the guides on the cargo area 3. Then take it out toward the top.
floor, arrows, and remove the privacy
The folded together load floor can be placed into
screen.
the luggage compartment.
Cargo net
Ensure that the cargo net is firmly
attached; otherwise, injuries may occur.<
Before installing
1. Remove the pouch with the cargo net from
ProCarManuals.com
104
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Things to remember when driving DRIVING TIPS
3. Insert each cargo net mounting pin all the Determining cargo limit
way into its respective front mount in the
headliner, arrow 1, and push it forward.
4. Attach the hook, arrow 2, at the bottom of
each retaining strap to the respective eye on
the vehicle floor.
5. Lash the cargo net securely. To do so,
tighten the retaining straps at the tensioning
buckles.
105
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
DRIVING TIPS Things to remember when driving
Load
4-seater:
Securing cargo
5-seater:
ProCarManuals.com
106
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Things to remember when driving DRIVING TIPS
Mounting points
Roof-mounted luggage
rack
A special rack system is available as an option for
your MINI. Your MINI dealer will be glad to
advise you. Comply with the installation instruc-
tions supplied with the rack system.
ProCarManuals.com
107
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
DRIVING TIPS Things to remember when driving
tance and thus leads to greater fuel consump- Switch off any features that are not
tion and tire wear. currently required
Features such as air conditioning, seat heaters
Drive off immediately and the rear window defroster require a great
Do not wait for the engine to warm up while the deal of energy and result in greater fuel con-
vehicle remains stationary. Start driving right sumption, especially in city driving and during
away, but at moderate engine speeds. This is the Stop & Go operation. For this reason, switch off
fastest way for the cold engine to reach its oper- these features if they are not really needed.
ating temperature.
Have the vehicle serviced
Think ahead while driving Have your vehicle serviced regularly to achieve
Avoid unnecessary acceleration and braking by good economy and a long vehicle life. The man-
maintaining a suitable distance to the vehicle ufacturer of your MINI recommends having the
driving ahead. vehicle serviced by a MINI dealer. Also note the
MINI Maintenance System, page 206.
Looking-ahead and smooth driving reduces fuel
consumption.
108
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Things to remember when driving DRIVING TIPS
When you are driving on poor roads, there are a After driving on poor roads, please observe the
few points which you should strictly observe for following points to maintain the driving safety of
your own safety, for that of your passengers, the vehicle:
and for the safety of the vehicle: > Clean the coarsest dirt from the body.
> Familiarize yourself with the vehicle before > Clean mud, snow, ice, etc. from the wheels
beginning to drive and do not take risks and tires and check the tires for damage.
under any circumstances.
> Adapt your speed to road conditions. The
steeper and rougher the road surface is, the
lower the speed should be.
> When driving on very steep uphill or down-
hill grades, make sure in advance that the
engine oil and coolant levels are close to the
maximum mark, refer to page 203.
> While driving, watch carefully for obstacles
such as rocks or holes. Try to avoid these
ProCarManuals.com
109
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
ProCarManuals.com
Follow Me.
CONTROLS
DRIVING TIPS
ProCarManuals.com
NAVIGATION
ENTERTAINMENT
COMMUNICATIONS
MOBILITY
REFERENCE
Navigation system
lites and vehicle sensors, and can reliably guide can be updated.
you to every entered destination. You may obtain current navigation data and the
Enter data only with the vehicle station- enabling code at your MINI dealer.
ary, and always give priority to the appli- Updating the data can take several hours,
cable traffic regulations in the event of any con- depending on the volume of data.
tradiction between traffic and road conditions
> Update data while driving to reduce the
and the instructions issued by the navigation
drain on the battery.
system. Failure to take to this precaution can
place you in violation of the law and put vehicle > The update is resumed automatically when
occupants and other road users in danger.< a trip is continued after an interruption.
> Only the main functions of the navigation
Selecting navigation system are available during updating.
1. "Navigation" > You can inquire as to the status of the
update.
> The data are stored in the vehicle.
> After the updating process is complete, the
system restarts.
> The medium with the navigation data can be
removed after the update.
112
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Navigation system NAVIGATION
To update
1. Insert USB storage device with navigation
data
> Into the USB interface in the glove com-
partment
> Into the USB audio interface.
2. Follow the instructions on the onboard com-
puter.
3. Enter the activation code of the USB storage
device.
4. Begin driving.
After you begin to drive, the system restarts and
updates the navigation data as you drive.
ProCarManuals.com
113
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
NAVIGATION Destination entry
Destination entry
General information The system also supports you with the following
features:
In entering your destination you can select from > If you do not enter a street, the system will
among the following options: guide you to the downtown area of a town
> Manual destination entry, see below or city.
> Selecting destination from address book, > You can skip the entry of country and town/
page 116 city if the current entries should be retained
> Last destinations, page 117 for your new destination.
> Special destinations, refer to page 118
Entering a state/province
> Entering the destination via map, refer to
1. "Navigation"
page 119
2. "Enter address"
> Selecting home address, refer to page 117
ProCarManuals.com
Manual destination
entry
To make it easier to enter town/city names and
street names, you are supported with the word-
match principle, refer to page 122. This makes it
possible to enter different spellings and com-
pletes your entry automatically so that stored
town/city names and street names can be
accessed quickly. 2. Select letters, if necessary.
1. "Navigation" A list of all towns/cities starting with this let-
2. "Enter address" ter appears on the Control Display.
To delete letters:
> To delete individual numbers or letters:
Turn the MINI joystick to highlight
and press the MINI joystick.
> To delete all numbers or letters:
Turn the MINI joystick to highlight
and press and hold the MINI joystick.
3. If necessary, enter more letters.
The list gradually grows smaller each time
you enter a new letter.
114
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Destination entry NAVIGATION
115
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
NAVIGATION Destination entry
> Setting "Route preference", refer to page Storing a destination in the address
123. book
> Search for "Points of Interest at loc.", refer to Store the destination in the address book after
page 118. entering the destination.
1. "Navigation"
2. "Map"
3. "Guidance"
4. Open "Options".
5. "Store as new contact" or "Add to existing
contact".
Address book
ProCarManuals.com
116
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Destination entry NAVIGATION
117
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
NAVIGATION Destination entry
118
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Destination entry NAVIGATION
119
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
NAVIGATION Destination entry
Entering a town/city
> Select the symbol and "Start guid- The town/city can be spelled or entered as an
ance" if necessary. entire word.
ProCarManuals.com
> "Exit interactive map" The methods of entry depend on the nav-
> Map display igation data in use and the country and
language settings.<
> "Display destination"
The section of the map around the desti- 1. {City} or {Spell city}.
nation is displayed. 2. Wait for the system prompt for the town/
> "Display current location" city.
The section of the map around the cur- 3. Say the name of the town/city or if neces-
rent position is displayed. sary, spell at least the first three letters.
> "Find points of interest", refer to 4. Select city/town:
page 118.
> To select a recommended town/city:
{Yes}
120
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Destination entry NAVIGATION
Saving destination
The destination is automatically added to the list
of the last destinations.
4. Select the location where the intermediate
destination is to be inserted.
121
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
NAVIGATION Destination entry
Word-matching principle
The system's word-matching principle makes it
easier to enter the names of towns or streets.
The system runs ongoing checks, comparing
your destination entries with the data stored in
the vehicle as the basis for instant response. The
user benefits include:
> Town/city names can also be entered differ-
ently from the official names if you use a
form that is customary in other countries.
Example:
Instead of "München", you can also enter
the English spelling "Munich" or the Italian
spelling "Monaco".
> When you are entering the names of towns/
ProCarManuals.com
122
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Route guidance NAVIGATION
Route guidance
Starting route guidance > Route criteria can be changed during desti-
nation input and during route guidance.
1. "Navigation" > Street types are part of the navigation data
2. "Enter address" and are taken into account in route plan-
3. Select the destination. ning, e.g. avoiding highways.
4. "Accept destination" > The proposed route can differ from personal
experience.
5. "Start guidance"
> The settings are stored for the remote con-
> The route is displayed on the onboard com-
trol currently in use.
puter.
> Route guidance with traffic information,
> The distance to the destination/intermedi-
refer to page 129.
ate destination and the estimated time of
arrival are displayed in the map view.
ProCarManuals.com
Route criteria
General information
> You can influence the calculated route by
selecting certain criteria.
123
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
NAVIGATION Route guidance
2. "Route information"
Route
There are various views of the route available
during route guidance:
> Arrow display
> List of streets and towns/cities
> Map view, refer to page 125
Arrow display
The following information is displayed during
3. Highlight a section.
route guidance:
> Large arrow: current direction of travel. Taking detours
> Street name of the currently traveled street. During route guidance, prompt the navigation
> Small arrow: indicates the next change of system to bypass certain route segments. In
direction. doing so, you will specify how many kilometers
to travel before returning to the original route.
> Intersection view.
1. "Navigation"
> Lane information.
2. "Route information"
> Traffic information.
> Distance to the next change of direction.
> Street name of the next change of direction.
124
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Route guidance NAVIGATION
Overview
bypassed: 1 Toolbar
1. "Navigation" 2 Route segment with traffic obstruction
2. "Route information" 3 Road sign for traffic obstruction
3. "New route for:" 4 Planned route
4. "Remove blocking" 5 Current location
6 Upper status box
Recommended refueling
7 Lower status box
The remaining driving range is calculated, and
gas stations along the route are shown.
Lines on the map
Even with the latest navigation data, informa-
In the map view, streets and roads are depicted
tion on various points of interest may have
with different colors and lines according to their
changed, e.g., service stations may not be in
classification. Dotted lines represent railroad
operation.
and ferry connections. National borders are
1. "Navigation" depicted with thin lines.
2. "Route information"
3. "Recommended refuel" Traffic obstructions
A list of gas stations is displayed. Small triangles along the planned route identify
4. Select a gas station. route segments with traffic obstructions,
depending on map scale. The direction of the tri-
5. Select the symbol.
angles indicates the direction of the obstruction.
6. "Start guidance": The guidance to the
Road signs classify the obstructions.
selected gas station is started.
> Red road sign: the obstruction relates to the
"Add as another destination": The gas sta-
planned route or direction of travel.
tion is included in the route.
125
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
NAVIGATION Route guidance
> Gray road sign: the obstruction does not Changing map scale
relate to the planned route or direction of "Interactive map"
travel.
> Moving map: Move the MINI joystick in the
Traffic information, refer to page 127. corresponding direction.
> Shifting map diagonally: Move the
Planned route
MINI joystick in the corresponding direction
After route guidance is started, the planned and turn the MINI joystick.
route is displayed on the map.
Changing scale
Status boxes
1. Select the symbol and press the MINI joy-
Show/hide: Press the MINI joystick. stick.
> Upper status box: Time, phone details, and 2. Changing scale: turn the MINI joystick.
entertainment details.
> Lower status box: Symbol for active route Automatic scaling of the map
guidance, traffic information status, arrival In the map view facing north, turn the
time, and distance from destination.
ProCarManuals.com
126
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Route guidance NAVIGATION
127
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
NAVIGATION Route guidance
Real Time Traffic Information End-User non-infringement fitness for a particular pur-
Provisions pose, or those arising from a course of dealing or
Certain MINI models equipped with navigation usage of trade.
have the capability to display real-time traffic D. Neither Total Traffic Network, Inrix, Inc. nor
information. If your system has this capability MINI NA will be liable to you for any indirect,
the following additional terms and conditions special, consequential, exemplary, or incidental
apply: damages (including, without limitation, lost rev-
An End-User shall no longer have the right to use enues, anticipated revenues, or profits relating
the Traffic Data in the event that the End-User is to the same) arising from any claim relating
in material breach of the terms and conditions directly or indirectly to use of the traffic data,
contained herein. and even if Total Traffic Network, Inrix, Inc., or
MINI NA are aware of the possibility of such
A. Total Traffic Network, a division of Clear Chan-
damages. These limitations apply to all claims,
nel Broadcasting, Inc. ("Total Traffic Network")
including, without limitation, claims in contract
holds the rights to the traffic incident data and
and tort (such as negligence, product liability
RDS-TMC network through which it is delivered.
and strict liability). Some states do not allow the
You may not modify, copy, scan or use any other
exclusion or limitation of incidental or conse-
ProCarManuals.com
128
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Route guidance NAVIGATION
differently, depending on the scale of the map > For personal safety, traffic information that
and location of the traffic obstruction in relation indicates a potential hazard can not be hid-
to the route. den.
129
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
NAVIGATION Route guidance
130
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
What to do if… NAVIGATION
What to do if…
What to do if…
> The current position cannot be displayed?
The position is in an unrecognized region, in
a poor reception area, or the system is in the
process of determining the position. Recep-
tion is best when you have an unobstructed
view to the sky.
> The route guidance does not accept an
address without the street name?
A downtown area cannot be determined for
the town or city that has been entered. Input
any street in the selected town/city and start
route guidance.
ProCarManuals.com
131
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
ProCarManuals.com
Rock Me.
CONTROLS
DRIVING TIPS
ProCarManuals.com
NAVIGATION
ENTERTAINMENT
COMMUNICATIONS
MOBILITY
REFERENCE
> Radio
Switching on/off
> CD player
> External devices, e.g. MP3 player Entertainment audio output
Controls
The audio sources can be operated using:
> Buttons near the CD player
> Onboard computer
> Buttons on the steering wheel, refer to
page 10
Press the knob.
Buttons near the CD player
This symbol at the upper edge of the Control
Display indicates that the sound output is
switched off.
134
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
On/off and tone ENTERTAINMENT
Tone control
Various tone settings can be changed, e.g. treble
and bass or the speed-dependent volume con-
trol.
The tone settings are set for all audio sources at
4. To adjust: turn the MINI joystick.
once.
5. To store: Press the MINI joystick.
The settings are stored for the remote control
currently in use; refer to Personal Profile,
page 26.
Volume levels
> "Speed volume": Volume is adapted
Treble, bass, balance, fader depending on the speed
> "Treble": treble adjustment. > "PDC": Volume of the PDC acoustic signal
relative to the entertainment sound output
> "Bass": bass adjustment.
> "Gong": Volume of the acoustic signal, e.g.
> "Balance": volume distribution right/left.
for the acoustic Safety Belt Reminder rela-
> "Fader": volume distribution front/back. tive to the entertainment sound output
Mobile phone preparation Bluetooth
> "Microphone": volume of the microphone
during a phone conversation.
> "Loudspeak.": volume of the speaker during
a phone conversation.
135
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
ENTERTAINMENT On/off and tone
Adjustments
1. "CD/Multimedia", "Radio" or "Settings".
2. "Tone"
3. "Volume settings"
4. Select the desired volume setting.
136
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Radio ENTERTAINMENT
Radio
General information
2. "FM" or "AM"
Your radio is designed for reception of the fol-
3. Select the desired station.
lowing stations:
ProCarManuals.com
> FM and AM
> HD Radio
> Satellite radio
AM/FM station
Selecting a station
The selected station is stored for the remote
control currently in use.
Changing stations
Turn and press the MINI joystick
or
Press the button for the corresponding
direction
137
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
ENTERTAINMENT Radio
4. Select the frequency: turn the MINI joystick. Switching the RDS on/off
1. "Radio"
2. "FM"
3. Open "Options".
4. "RDS"
Storing stations
1. "Radio"
2. "FM" or "AM"
The setting is stored for the remote control cur-
ProCarManuals.com
HD Radio™ reception
Many radio stations transmit analog and digital
signals. If a digital radio network is available,
these stations can be received digitally and thus
with improved sound quality.
License conditions
HD Radio™ technology is manufactured under
4. Press the MINI joystick.
U.S. and Foreign Patents licensed from iBiquity
5. Select the desired memory location. Digital Corp. HD Radio™ and the HD and HD
Press and hold the MINI joystick to save a radio Radio logos are proprietary trademarks of iBiq-
station that appears in the list of stations, but is uity Digital Corp.
not being listened to.
The stations are stored for the remote control Activating/deactivating digital radio
currently in use. reception
1. "Radio"
RDS – Radio Data System 2. "FM" or "AM"
In the FM frequency range, additional informa- 3. Open "Options".
tion is transmitted via RDS. If the reception con-
4. "HD Radio Reception"
ditions are good, the station names are shown
on the Control Display. If the reception is weak The setting is stored for the remote control cur-
or disrupted, it can take some time before the rently in use.
station names are displayed. This symbol is displayed when a station is
being received digitally.
138
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Radio ENTERTAINMENT
Selecting a substation
3. Select the desired station.
The symbol indicates that a main station also
broadcasts additional substations. The station 4. Open "Options".
name of the main station ends in HD1. The sta- 5. "Delete entry"
tion names of the substations end in HD2, HD3,
etc.
1. Select the desired station. Satellite radio
2. Press the MINI joystick.
General information
3. Select the substation.
The channels are offered in fixed packages.
When reception is poor, the substation is muted
Packages must be activated by telephone.
for several seconds.
Navigation bar
Stored stations Symbol Function
139
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
ENTERTAINMENT Radio
Selecting channels
You can only listen to activated channels.
The selected channel is stored for the remote
4. Select the category 'Unsubscribed Chan-
control currently in use.
nels'.
5. Select desired channel. Using the onboard computer
The telephone number and electronic serial
1. "Radio"
number, ESN, are displayed.
2. "Satellite radio"
6. Dial the telephone number to have the
channels activated. 3. Select "All channels" or the desired cate-
gory.
4. Select desired channel.
140
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Radio ENTERTAINMENT
2. "Satellite radio"
rently being listened to is temporarily stored in a
3. Select "All channels" or a desired category. cache memory. Prerequisite: the signal must be
4. Select desired channel. available.
5. Press the MINI joystick again. The stored audio track can be played back at a
6. Press the MINI joystick again to confirm the different time from the live broadcast. If the
highlighted channel. cache memory is full, then the older tracks are
recorded over. The cache memory is deleted if a
new channel is selected.
141
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
ENTERTAINMENT Radio
Activating
1. "Radio"
2. "Satellite radio"
5. Select the desired league.
3. "Replay - Time shift"
6. Select "Add all teams" or a desired team.
4. "Automatic time shift"
Accessing favorites
Deactivating
If an activated favorite is being played, the mes-
"Automatic time shift"
sage "Favorite alert!" appears for approx.
20 seconds.
Storing favorites
Select "Favorites" while the alert message is
Up to 30 favorites can be stored in the favorites
being displayed.
list. Possible favorites include artist, track, game,
league, and team.
142
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Radio ENTERTAINMENT
4. "Set jump"
5. Select the desired region.
The region is stored for the remote control cur-
rently in use.
Activating/deactivating Jump
1. "Radio"
2. "Satellite radio"
3. "Jump to:"
The displayed favorite will be played.
As soon as information about the selected
If it receives no notification, the system switches
region becomes available, it is broadcast.
into the 'My Favorites' category. All of the favor-
ites currently being broadcast can be selected A new panel appears in the display.
from a list. Cancel Traffic Jump: "Cancel".
143
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
ENTERTAINMENT CD player
CD player
General information
Inserting CD
ProCarManuals.com
Audio playback
Selecting the track using the button
Press the button for the corresponding
direction repeatedly until you reach the desired
track.
144
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
CD player ENTERTAINMENT
Displaying information about the track Switch off random play sequence: Press the
MINI joystick.
If information about a track has been stored, it is
displayed automatically:
Fast forward/reverse
Press and hold the button for the corre-
sponding direction.
ProCarManuals.com
Automatic replay
Selected tracks, folders, or CDs are automatically
repeated.
> Artist
> Album title
> Number of tracks on the CD
> Track file name
145
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
ENTERTAINMENT External devices
External devices
Overview
1 USB interface
2 Connection for audio playback:
Symbol Meaning
ProCarManuals.com
AUX-In connection
Overview
> It is possible to connect audio devices, e.g.
MP3 players. Sound is output over the vehi-
cle speakers.
> Recommended settings: Mid-level tone and
volume settings on the audio device. Tone
may depend on the quality of the audio files.
3. "AUX front"
Sound is output on the vehicle loudspeakers.
Volume
The volume of the sound output depends on the
audio device. If this volume differs markedly
from the volume of the other audio sources, it is
advisable to adjust the volumes.
146
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
External devices ENTERTAINMENT
Adjusting volume Ask your MINI dealer for suitable audio devices/
1. "CD/Multimedia" mobile phones.
Audio files
Playback of standard audio files is possible,
depending on the vehicle equipment:
> MP3
> WMA
> WAV (PCM)
> AAC, M4A
5. Turn MINI joystick until the desired volume
ProCarManuals.com
is set and then press the MINI joystick. > Without voice activation system: Playback
lists: M3U
> With voice activation system: Playback lists:
USB audio interface/ M3U, WPL, PLS
147
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
ENTERTAINMENT External devices
applicable, composer.
To protect the USB interface and USB device
from mechanical damage, connect them with a Track titles are displayed if they have been
flexible adapter cable. stored in the Latin alphabet.
Connect the USB device to the USB interface 1.
Starting the track search
After initial connection 1. "CD/Multimedia"
Number of tracks
The data from up to four USB devices or for
approx. 26,000 tracks can be stored in the vehi-
cle. If a fifth device is connected or if more than
4. Select desired category, e.g. "Genre", "Art-
26,000 tracks are stored, then the data of exist-
ist".
ing tracks may be deleted.
All entries are displayed in a list.
Copy protection > Open "A-Z search" and enter the desired
Music tracks with integrated Digital Rights Man- input. When a letter is entered, the
agement (DRM) cannot be played. results are filtered using this letter as the
first letter. If multiple letters are entered,
all results that contain that sequence are
displayed.
> Select the desired entry from the list.
148
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
External devices ENTERTAINMENT
Fast forward/reverse
Buttons on the steering wheel or CD player:
Press and hold the button for the corre-
sponding direction.
Video playback
The video image on the onboard computer is
displayed when the vehicle is standing still; in
some countries only when the hand brake is
5. Select additional categories if desired. engaged or if the transmission is set on P.
Not all categories need to be selected. For For video playback, connect the Apple device to
example, if all of the tracks by a certain artist the USB audio interface using the video-enabled
are to be displayed, call up that artist only. adapter cable.
All of the tracks by that artist are then dis- 1. "CD/Multimedia"
played.
2. "External devices"
6. "Play"
ProCarManuals.com
Playback lists
To open playback lists.
1. "CD/Multimedia"
2. "External devices"
3. Select the or symbol.
4. "Playlists"
149
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
ENTERTAINMENT External devices
Notes Requirements
Do not subject the audio device to > Suitable device. Information is available at
extreme environmental conditions, e.g. www.mini.com/connectivity.
extremely high temperatures, refer to the oper- > Device operational.
ating instructions for the audio device. Other-
> Ignition switched on.
wise the audio device may be damaged, impair-
ing driving safety while driving.< > Bluetooth activated in vehicle, refer to
page 168, and in the device.
Depending on the configuration of the audio
files, e.g. bit rates greater than 256 Kbit/s, > Bluetooth presets in the device are required,
proper playback cannot always be ensured. e.g. connection not confirmed or visible,
refer to Owner's Manual for the device.
Information on connection > A number with at least 4 and at most
> The connected audio device is supplied with 16 digits has been established as the Blue-
a max. power of 500 mA if supported by the tooth passkey. Only required once for pair-
device. Therefore, do not connect the device ing.
to the power socket in the vehicle.
Pairing and connecting
ProCarManuals.com
150
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
External devices ENTERTAINMENT
151
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
ENTERTAINMENT External devices
nected devices.
Symbol Function
4. Open "Options".
Next track 5. "Configure phone"
Fast forward: Press and hold the 6. Deactivate "Audio".
symbol. 7. "OK"
Previous track With a mobile phone, only the audio connection
is disconnected. All other connections remain
Reverse: Press and hold the sym-
active.
bol.
Unpairing device
Track search 1. "CD/Multimedia"
Depending on the device, it is possible to search
2. "Bluetooth® (audio)"
by track.
3. "Bluetooth® audio" if applicable
1. "CD/Multimedia"
4. Highlight the device to be unpaired.
2. "External devices"
5. Open "Options".
3. Select the symbol.
6. "Remove phone from list"
4. "Search device content"
5. "A-Z search"
6. Select desired entry or directory.
152
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
External devices ENTERTAINMENT
153
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
ENTERTAINMENT External devices
6. "Start update"
7. "OK"
All of the listed software updates are installed.
154
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
External devices ENTERTAINMENT
ProCarManuals.com
155
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
ProCarManuals.com
Connect Me.
CONTROLS
DRIVING TIPS
ProCarManuals.com
NAVIGATION
ENTERTAINMENT
COMMUNICATIONS
MOBILITY
REFERENCE
158
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Hands-free device Bluetooth COMMUNICATIONS
> A number with at least 4 and at most 4. To perform other operations on the mobile
16 digits has been established as the Blue- phone, refer to the Owner's Manual for the
tooth passkey. Only required once for pair- mobile phone: e.g. search for and connect
ing. Bluetooth device or a new device.
> Radio readiness switched on. The Bluetooth name of the vehicle appears
on the mobile phone display.
Activating/deactivating Bluetooth link 5. Select the Bluetooth name of the vehicle on
Bluetooth is not permitted everywhere. Comply the mobile phone display.
with all safety guidelines and regulations. 6. The onboard computer or the mobile phone
1. "Telephone" will prompt you to enter the same Bluetooth
2. Open "Options". passkey.
3. "Bluetooth®"
ProCarManuals.com
159
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
COMMUNICATIONS Hands-free device Bluetooth
160
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Hands-free device Bluetooth COMMUNICATIONS
Operation
Adjusting volume Rejecting a call
"Reject"
The caller is redirected to the mailbox if it has
been activated.
Ending a call
Press the button on the steering wheel
or
1. "Telephone"
2. "End call"
Turn the knob until the desired volume is
reached.
The setting is stored for the remote control cur-
rently in use.
161
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
COMMUNICATIONS Hands-free device Bluetooth
Establishing a second call Both calls are always ended when a conference
call is terminated. If one call is terminated by
Establish another call during an active call.
another party, the other call can be continued.
1. "Telephone"
2. "Active calls"
162
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Hands-free device Bluetooth COMMUNICATIONS
Editing a contact
Changing entries in the "Contacts" menu. If a
contact is changed, the changes are not stored
in the mobile phone. A copy of the entry is
stored in the vehicle.
ProCarManuals.com
163
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
COMMUNICATIONS Hands-free device Bluetooth
3. Select the desired entry and phone number, Calling a number from the list
if necessary. Select an entry.
The connection is established. The connection is established.
Deleting a single entry or all entries Deleting a single entry or all entries
Deleting entries depends upon the mobile Deleting entries depends upon the mobile
phone. phone.
1. Highlight the entry. 1. Highlight the entry.
2. Open "Options". 2. Open "Options".
3. "Delete entry" or "Delete list". 3. "Delete entry" or "Delete list".
contact". contact".
4. Select the type of number: "Home", "Busi- 4. Select the type of number: "Home", "Busi-
ness", "Mobile" or "Other". ness", "Mobile" or "Other".
5. Complete the entries if necessary. 5. Complete the entries if necessary.
6. "Store contact" if necessary 6. "Store contact" if necessary
164
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Hands-free device Bluetooth COMMUNICATIONS
Displaying contacts
1. "Contacts"
2. "My contacts"
165
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
COMMUNICATIONS Hands-free device Bluetooth
A symbol indicates the storage location of the Checking the address as a destination
contacts: An address that is to be used in route guidance
must correspond to the navigation data stored
Symbol Storage location in the vehicle. The address can be checked to
ensure this.
No symbol In the vehicle; the address
has not been checked as a 1. Select the desired contact and highlight the
destination. address.
2. Open "Options".
In the vehicle; the address 3. "Check as destination"
has been checked as a desti-
nation. 4. Correct and store the address, if necessary.
Deleting contacts
1. "My contacts"
2. Highlight the contact.
3. Open "Options".
3. Change the entry.
4. "Delete contact" or "Delete all contacts".
4. Move the MINI joystick to the left.
5. "Yes"
If a contact that comes from the mobile phone is
edited, the changes are not stored on the mobile
phone. A copy of the entry is stored in the vehi-
cle, and only this copy is displayed. Under cer-
tain conditions, an identical contact entry is gen-
erated.
166
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Mobile phone preparation Bluetooth COMMUNICATIONS
167
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
COMMUNICATIONS Mobile phone preparation Bluetooth
Symbol Function
Telephone
Activating/deactivating additional
Auxiliary phone
functions
Audio source To use these functions in the vehicle, activate
them before pairing. For information on suitable
mobile phones that support this function, refer
Up to four external devices can be paired. Two
to page 167.
devices can be connected to the vehicle at a
time and used for different functions. The phone 1. "Telephone"
can be used to perform all of the following 2. "Bluetooth® (phone)"
phone functions. 3. Open "Options".
4. "Configure Bluetooth®"
Requirements
5. Select desired additional function.
> Suitable mobile phone, refer to page 167.
> Mobile phone operational.
> Bluetooth activated in vehicle, refer to
page 168, and in the mobile phone.
168
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Mobile phone preparation Bluetooth COMMUNICATIONS
Auxiliary phone
ProCarManuals.com
8. "OK"
9. Move the MINI joystick to the left.
169
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
COMMUNICATIONS Mobile phone preparation Bluetooth
3. Select the mobile phone to be connected. If a device is assigned a function, this may deac-
tivate the function in an already connected
device and cause the other device to be
unpaired.
170
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Mobile phone preparation Bluetooth COMMUNICATIONS
Activate and connect the mobile phone in vehi- > Is the passkey input taking longer than
cle, refer to page 169. 30 seconds? Repeat the pairing procedure.
The mobile phone is used as an audio source if > Are too many Bluetooth devices connected
no other device is connected as an audio source. to the mobile phone? If so, delete the con-
If a device is already connected as an audio nections with other devices on the mobile
source: phone.
1. Activate and connect the mobile phone in > Is the audio connection activated? Deacti-
vehicle, refer to page 169. vate the audio connection.
2. "Bluetooth® (phone)" the vehicle and only pair and connect one
All paired mobile phones are listed. device.
3. Highlight the device to be unpaired. > Telephone functions not possible.
4. Open "Options". > Is the mobile phone paired as an auxiliary
5. "Remove phone from list" phone and is the auxiliary phone function
deactivated? Activate the function.
> Outgoing call not possible? Connect the
mobile phone as a telephone.
Is the mobile phone no longer responding?
> Switch the mobile phone off and back on
again. Repeat the pairing procedure.
> Is the ambient temperature too high or too
low? Do not subject your mobile phone to
extreme ambient temperatures.
Phone book entries are not displayed, not all of
What to do if…
them are displayed, or they are displayed
For information on suitable mobile phones, refer
incompletely.
to page 167.
> The transfer of phone book entries has not
The mobile phone could not be paired or con-
yet completed.
nected.
> It is possible that only the phone book
> Is Bluetooth activated in the vehicle and in
entries of the mobile phone or the SIM card
the mobile phone? Activate Bluetooth in the
are transferred.
vehicle and in the mobile phone.
> It may not be possible to display phone book
> Do the Bluetooth passkeys on the mobile
entries with special characters.
phone and the vehicle match? Enter the
same passkey on the mobile phone and via > The number of phone book entries to be
the onboard computer. stored is too high.
171
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
COMMUNICATIONS Mobile phone preparation Bluetooth
> The data volume of the phone book entry is Adjustments are only possible during a call and
too great, e.g. due to additionally stored must be carried out separately for each phone.
information such as notes? Reduce the data When the telephone is unpaired, this deletes the
volume. settings.
> Is the mobile phone connected as an audio 1. "Settings"
source or auxiliary phone? The mobile 2. "Tone"
phone must be connected as a telephone.
3. "Volume settings"
The telephone connection quality is low.
4. To select the desired setting:
> Depending on the mobile phone, it is possi- "Microphone" or "Loudspeak."
ble to adjust the strength of the Bluetooth
5. To adjust: Turn the MINI joystick.
signal.
6. To store: Press the MINI joystick.
> Insert the mobile phone into the snap-in
adapter or place it in the vicinity of the cen-
ter console.
Incoming call
> Adjust the volume of the microphone and Receiving calls
speaker separately.
ProCarManuals.com
Accepting a call
Press the button on the steering wheel
or
172
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Mobile phone preparation Bluetooth COMMUNICATIONS
173
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
COMMUNICATIONS Mobile phone preparation Bluetooth
Use keypad dialing to gain access to network Select the symbol. Contact with one
services or to control devices, e.g. to remotely phone number. The connection is estab-
access an answering machine. This requires the lished.
DTMF code.
174
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Mobile phone preparation Bluetooth COMMUNICATIONS
2. Select the symbol. Contact with more than Deleting a single entry or all entries
one phone number. Select phone number, Deleting entries depends upon the mobile
the connection is established. phone.
Call not possible, the mobile phone has no 1. Highlight the entry.
reception or network.
2. Open "Options".
Editing a contact 3. "Delete entry" or "Delete list".
Changing entries in the "Contacts" menu. If a
contact is changed, the changes are not stored
Saving an entry in the contacts
in the mobile phone. A copy of the entry is 1. Highlight the entry.
stored in the vehicle. 2. Open "Options".
1. Highlight the contact. 3. "Store as new contact" or "Add to existing
2. Open "Options". contact".
3. "Edit entry" 4. Select the type of number: "Home", "Busi-
ness", "Mobile" or "Other".
The contact can be edited.
5. Complete the entries if necessary.
ProCarManuals.com
175
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
COMMUNICATIONS Mobile phone preparation Bluetooth
Deleting a single entry or all entries At this point, follow the instructions that appear
Deleting entries depends upon the mobile on the display of the mobile phone, also refer to
phone. the Owner's Manual for the mobile phone.
6. "Store contact" if necessary > The mobile phone can be operated without
removing your hand from the steering
Hands-free system wheel.
> In many cases, the entry process is sup-
General information ported by means of announcements or
Calls being conducted using the hands-free sys- questions.
tem can be continued using the mobile phone > {...} Verbal instructions to use with the voice
and vice versa. operation system.
> {{...}} Identifies the answers generated by
From the mobile phone to the hands- the voice operation system.
free system
Calls that have been initiated from outside the Voice commands
Bluetooth range of the vehicle can be continued
using the hands-free system if the ignition is Activating voice activation system
switched on. 1. Briefly press the button on the steering
Depending on the mobile phone, the call is wheel.
automatically switched to hands-free mode. 2. Say the command.
If the switch does not occur automatically, then
follow the instructions that appear on the dis- Finishing voice input
play of the mobile phone, also refer to the Press the button on the steering wheel
Owner's Manual for the mobile phone. briefly
or
From hands-free system to mobile
{Cancel}.
phone
Calls being conducted using the hands-free sys-
tem can also be continued using the mobile
phone if so desired, depending on the mobile
phone.
176
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Mobile phone preparation Bluetooth COMMUNICATIONS
Possible commands are read aloud. All digits entered up to this point are deleted.
177
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
COMMUNICATIONS Mobile phone preparation Bluetooth
Notes
Do not use the voice operation system to initiate
an emergency call. In stressful situations, the
voice and vocal pitch can change. This can
unnecessarily delay the establishment of a tele-
phone connection.
178
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Mobile phone preparation Bluetooth COMMUNICATIONS
179
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
COMMUNICATIONS Office
Office
Requirements
> A suitable mobile phone is paired with the
vehicle and connected. In some mobile
phones, the data access to the mobile
phone must be confirmed.
180
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Office COMMUNICATIONS
Displaying contacts
1. "Office"
2. "Contacts"
3. Change the entry.
4. "Store contact in vehicle"
If a contact is changed, the changes are not
ProCarManuals.com
181
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
COMMUNICATIONS Office
Checking the address as a destination that route guidance is possible for all
An address that is to be used in route guidance addresses.
must correspond to the navigation data stored 9. "Accept address" if necessary
in the vehicle. The address can be checked to 10. "Store contact in vehicle"
ensure this.
1. Select the desired contact and highlight the Contact types
address. Phone numbers and addresses can be assigned
2. Open "Options". various contact types.
3. "Check as destination"
Symbol Meaning
4. Correct and store the address, if necessary.
If the address is corrected and stored, a copy of Private phone number
it is stored in the vehicle. The address is not
changed on the mobile phone. Business phone number
182
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Office COMMUNICATIONS
Only contacts that are stored in the vehicle are 2. Select message type.
deleted. The contacts on the mobile phone can- > "All"
not be deleted. All messages are displayed.
1. "Office" > "Text message"
2. "Contacts" Only text messages from mobile phones
are displayed.
3. Highlight the contact.
> "E-mail"
4. "Options"
Only text messages from mobile phones
5. "Delete contact" or "Delete all contacts". are displayed.
Text message
Messages
Calling a text message sender
General information 1. Select the desired message.
The displaying of text messages and e-mails 2. Select the symbol.
depends on whether the mobile phone supports
transmission to the vehicle. Text messages and Saving sender in the contacts
e-mails may not be supported by the service
1. Highlight the desired message.
provider or the function may have to be sepa-
rately activated. After a mobile phone is paired 2. Open "Options".
for the first time, the transmission may take sev- 3. "Store as new contact" or "Add to existing
eral minutes. Messages are only displayed com- contact"
pletely when the vehicle is stopped. Messages
from the auxiliary phone are not transmitted. Using contact data
Contact data from deadlines, tasks, text mes-
Displaying messages sages, e-mails and notes can be stored or
1. "Office" selected, see page 186.
2. "Messages"
183
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
COMMUNICATIONS Office
184
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Office COMMUNICATIONS
Tasks Notes
Displaying task list Displaying notes
Display open tasks that must be completed 1. "Office"
within the next 90 days. 2. "Notes"
1. "Office" All notes are displayed.
2. "Tasks"
Displaying a note
Sorting task list 1. Select the desired note.
1. Select the top line in the task list.
ProCarManuals.com
185
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
COMMUNICATIONS Office
Using contact data While the message is being read aloud, you have
the following options:
Overview > "Pause"
Contact data from deadlines, tasks, text mes- Interrupt the reading. Select again to
sages, e-mails and notes can be stored or resume the reading.
selected. > "Back to beginning"
Read message again from the beginning.
To display a contact or dial a phone
number: > Select the symbol.
What to do if…
For information on suitable mobile phones, refer
to page 167.
2. To display a contact or dial a phone number:
> Appointments, tasks, notes, or text mes-
> Select a contact to display a detailed view sages are not being displayed?
of the contact.
The mobile phone is not suitable for the
> Select a phone number to directly estab- missing function or is not correctly con-
lish a connection. nected.
The mobile phone is connected as an auxil-
Storing contact data
iary phone.
1. "Use contact data"
The Office function is deactivated.
2. Highlight a phone number or e-mail
The appointments are older than 20 days
address.
and are more than 50 days in the future.
3. Open "Options".
The tasks have been marked as completed
4. "Add to existing contact" or "Store as new or are more than 90 days in the future.
contact"
Depending on the number of appointments,
tasks, notes, and messages stored in the
mobile phone, not all of them are displayed
Reading aloud in the vehicle.
Text messages, e-mails, appointment entries, > Appointments or tasks from the mobile
tasks, and notes can be read aloud to you. phone are not being displayed at the correct
1. Select the desired message, appointment, time?
task, or note. The time zone, time, or date is incorrectly set
2. Select the symbol. in the Control Display and in the mobile
phone.
186
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Office COMMUNICATIONS
187
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
COMMUNICATIONS MINI Connected
MINI Connected
The concept
Connecting a mobile
ProCarManuals.com
Requirements
The following requirements must be met for the
function of MINI Connected:
> The operating system of the mobile phone
must support the software applications of
MINI Connected. 1 USB interface
> The software applications are installed on 2 Connection for audio/video playback:
the mobile phone and are operational. TRS connector 1/8"/3.5 mm
> Suitable mobile phone. Connect the mobile phone using the special
> Appropriate mobile phone contract. connecting cable, available at your MINI dealer,
to the USB interface 1 and the AV-IN
Possible additional costs incurred are not
connection 2.
included with MINI Connected.
To perform other operations on the mobile
Only make entries when the traffic situa-
phone, refer to the Owner's Manual for the
tion allows you to do so. If you do not
mobile phone: e.g. selecting and activating a
observe this precaution, your being distracted
software application.
can endanger vehicle occupants and other road
users.
For safety reasons, some software applications
can only be used when the vehicle is stopped.<
188
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
MINI Connected COMMUNICATIONS
This opens the main menu. Press the button twice to return back to the
main menu.
2. "MINI Connected"
Additional information can be found in the
MINI Connected Owner's Manual at
www.mini.com/connectivity.
189
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
ProCarManuals.com
Move Me.
CONTROLS
DRIVING TIPS
ProCarManuals.com
NAVIGATION
ENTERTAINMENT
COMMUNICATIONS
MOBILITY
REFERENCE
Refueling
192
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Refueling MOBILITY
The fuel tank is full when you top off twice after The engine is knocking regulated. Therefore, dif-
the first time that the fuel pump nozzle clicks off. ferent grades of gasoline can be used for refuel-
Do not overfill the fuel tank; otherwise, ing.
overflowing fuel can cause damage to the
environment and the vehicle.< Recommended gasoline grades
The manufacturer of your MINI recommends
Fuel tank capacity AKI 91.
If the range displayed is less than
30 miles/50 km, be sure to refuel; other- Minimum quality
wise, engine functions are not guaranteed and The manufacturer of your MINI recommends
damage may occur.< AKI 89.
Approx. 12.3 US gal/47 liters, including the Do not use any gasoline below the speci-
reserve capacity of 2.1 US gal/8 liters. fied minimum fuel grade. Otherwise, the
If the engine can no longer be started because engine could be damaged.<
of an empty fuel tank, add at least 1.3 US gal/ If you use gasoline with this minimum AKI rating,
5 liters of fuel. If the vehicle is at an angle, a the engine may produce knocking sounds when
ProCarManuals.com
larger amount of fuel may be necessary. starting at high external temperatures. This has
no effect on the engine life.
The use of poor quality fuels may result in
Fuel specifications harmful engine deposits or damage. Addi-
tionally, problems relating to driveability, start-
Gasoline ing and stalling, especially under certain envi-
For optimum fuel efficiency, the gasoline should ronmental conditions such as high ambient
be free of sulfur or as low in sulfur as possible. temperatures and high altitudes, may occur.
Fuels that are labeled at the pump as containing If driveability problems are encountered, we
metal may not be used. recommend switching to a high quality gasoline
brand and a higher octane grade - AKI number -
Do not fill the tank with leaded gasoline or
for a few tankfuls. To avoid harmful engine
gasoline that contains metal additives,
deposits, it is highly recommended to purchase
such as manganese or iron; otherwise, long term
gasoline from BP or Top Tier retailers.
damage to the catalytic converter or other com-
ponents may result.< Failure to comply with these recommendations
may result in a need for unscheduled mainte-
Fuels with a maximum ethanol content of up to
nance.<
10%, that is, E10, can be used.
The ethanol should meet the following quality
standards:
US: ASTM 4806-xx
CAN: CGSB-3.511-xx
xx: Always observe currently valid standards.
Do not fill the tank with E85, i.e. fuel con-
taining 85% ethanol, nor with FlexFuel.
Otherwise, the engine and fuel supply system
will be damaged.<
193
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
MOBILITY Wheels and tires
Tire inflation pressures For correct identification of the right tire infla-
tion pressures, observe the following:
Information for your safety > Tire sizes for your vehicle
ProCarManuals.com
It is not merely the tires' service life, but also > Maximum allowable driving speed
driving comfort and, to a great extent, driving
safety that depend on the condition of the tires Tire inflation pressures for driving up to
and the maintenance of the specified tire pres- 100 mph or 160 km/h
sure. For normal driving up to 100 mph or 160 km/h
and to achieve optimum driving comfort, adjust
Checking pressure pressures to the respective tire inflation pres-
Check the tire inflation pressure regularly sures listed on the following pages in the col-
and correct it, if necessary: at least twice a umns for traveling speeds up to a maximum of
month and before starting long trips. If you fail 100 mph or 160 km/h.
to observe this precaution you may be driving These tire inflation pressures can also be found
on tires with incorrect tire pressures, a condition on the driver's side door pillar when the driver's
that can not only compromise your vehicle's door is open.
driving stability, but also lead to tire damage and
the risk of an accident. Do not drive with
deflated, i.e. flat tires, except when using run-
flat tires. A flat tire will seriously impair your
vehicle's handling and braking response.
Attempts to drive on a flat tire can lead to loss of
control over the vehicle.<
Check the tire inflation pressures only on cold
tires. This means after a maximum of 1.25 miles/
2 km driving or when the vehicle has been
parked for at least 2 hours. When tires are warm, The maximum permitted speed for these
the tire inflation pressure is higher. tire inflation pressures is 100 mph or
After adjusting the tire inflation pressure, 160 km/h. Do not exceed this speed; otherwise,
reinitialize the Flat Tire Monitor, page 73, tire damage and accidents may occur.<
or reset the Tire Pressure Monitor, page 76.<
194
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Wheels and tires MOBILITY
195
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
MOBILITY Wheels and tires
195/60 R 16 89 H M+S
205/55 R 17 91 H M+S
205/55 R 17 91 H M+S RSC
ProCarManuals.com
More details on the permissible load and weights can be found on page 230.
196
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Wheels and tires MOBILITY
195/60 R 16 89 H M+S
205/55 R 17 91 H M+S
205/55 R 17 91 H M+S RSC
ProCarManuals.com
More details on the permissible load and weights can be found on page 230.
197
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
MOBILITY Wheels and tires
(before the R on ZR tires) upon the actual conditions of their use, how-
ever, and may depart significantly from the
Speed letter norm due to variations in driving habits, service
Q = up to 100 mph/160 km/h practices and differences in road characteristics
and climate.
T = up to 118 mph/190 km/h
H = up to 131 mph/210 km/h Traction
V = up to 150 mph/240 km/h The traction grades, from highest to lowest, are
W = up to 167 mph/270 km/h AA, A, B, and C.
Those grades represent the tire's ability to stop
Y = up to 186 mph/300 km/h
on wet pavement, as measured under con-
trolled conditions on specified government test
Tire Identification Number
surfaces of asphalt and concrete. A tire marked C
Tires with DOT codes meet the guidelines of the may have poor traction performance.
US Department of Transportation.
The traction grade assigned to this tire is
DOT code: based on straight-ahead braking traction
tests, and does not include acceleration, corner-
Uniform Tire Quality Grading ing, hydroplaning, or peak traction characteris-
For instance: DOT xxxx xxx 0212 tics.<
Manufacturer's code
for tire make Temperature
tire size and The temperature grades are A, the highest, B,
tire design and C, representing the tire's resistance to the
Tire age generation of heat and its ability to dissipate
Quality grades can be found where applicable heat when tested under controlled conditions
on the tire sidewall between tread shoulder and on a specified indoor laboratory test wheel. Sus-
maximum section width. For example: tained high temperature can cause the material
Tread wear 200 Traction AA of the tire to degenerate and reduce tire life, and
Temperature A excessive temperature can lead to sudden tire
198
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Wheels and tires MOBILITY
failure. The grade C corresponds to a level of suitable for winter conditions. In the interest of
performance which all passenger car tires must safety, new tires should be installed.
meet under the Federal Motor Vehicle Safety
Standard No. 109. Grades B and A represent lev- Minimum tread depth
els of performance on the laboratory test wheel
that exceed the minimum required by law.
The temperature grade for this tire is
established for a tire that is properly
inflated and not overloaded. Excessive speed,
underinflation, or excessive loading, either sep-
arately or in combination, can cause heat
buildup and possible tire failure.<
199
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
MOBILITY Wheels and tires
Otherwise, tire damage can be extremely dan- properly, there is a danger of subsequent dam-
gerous for vehicle occupants and other road age and related safety hazards. Make sure that
users.< the new wheels are balanced.<
200
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Wheels and tires MOBILITY
puncture, refer to page 76. Your MINI dealer will If the car is capable of speeds higher than that
be glad to advise you. permitted for the winter tires, a label stating the
maximum permitted speed for the mounted
Recommended tire brands tires must be displayed in your field of view. This
label is available at your tire dealer or MINI
dealer.
Storage
Always store wheels and tires in a cool, dry place
with as little exposure to light as possible.
Always protect tires against all contact with oil,
grease and fuels.
Do not exceed the maximum tire inflation pres-
For each tire size, the manufacturer of your MINI sure indicated on the side wall of the tire.
recommends certain tire brands. They are
marked with a clearly visible MINI designation Swapping wheels among the axles
ProCarManuals.com
on the sidewall of the tire. Depending on the individual use, front and rear
When properly used, these tires meet the high- tires may exhibit different wear and tear.
est standards in terms of safety and handling In order to maintain an even wear and tear, the
characteristics. wheels may be rotated between the axles. Your
MINI dealer will be glad to advise you.
Run-flat tires Always check the inflation pressure after the tire
When mounting new tires or changing over from rotation, if necessary change the pressure.
summer to winter tires and vice versa, mount
run-flat tires for your own safety. Keep in mind
that no space-saver spare tire is available in the Snow chains
event of a flat. Your MINI dealer will be glad to
advise you. Only certain types of fine-link snow chains have
been tested by the manufacturer of your MINI,
Special characteristics of winter tires classified as road-safe and recommended. Con-
tact your MINI dealer for more details.
The manufacturer of your MINI recommends
winter tires for use on roads in winter, or at tem- Only attach snow chains in pairs to the front
peratures below 45 7/+76. Although all-sea- wheels with the following tires.
son M+S tires provide better winter traction than > 195/60 R 16 M+S
summer tires, they generally fail to provide the Observe the manufacturer's instructions when
same levels of cold-weather performance as mounting snow chains. Do not exceed a speed
winter tires. of 30 mph or 50 km/h.
Do not initialize the Flat Tire Monitor if
Pay attention to speed
snow chains are mounted; otherwise, the
Always comply with the speed limit for the instrument might issue an incorrect reading.
winter tires mounted on your car; failure When driving with snow chains, it can be useful
to do so could result in tire damage and acci- to briefly deactivate DSC or activate DTC, refer to
dents.< page 71.<
201
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
MOBILITY Engine compartment
Engine compartment
202
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Engine compartment MOBILITY
Hood
Releasing Closing
Pull the lever. Close the hood from a height of approx. 16 in/
Do not clean the windshield and head- 40 cm with momentum. It must be clearly heard
lamps if the hood is unlocked as this may to engage.
damage the headlamp washer system.< If you notice any signs while driving your
ProCarManuals.com
Engine oil
Engine oil consumption depends on driving style
and operating conditions, e.g., with a very
sporty driving style, the engine oil consumption
is significantly increased.
To avoid damage, make sure that the Therefore, check the engine oil level regularly
wiper arms are against the windshield after each refueling.
before you open the hood.<
Press the release handle and open the hood. Checking engine oil level
1. With the vehicle's engine at normal operat-
ing temperature, i.e. after uninterrupted
driving for at least 6 miles/10 km, park the
vehicle on a level surface.
2. Switch off the engine.
3. Pull the dipstick out after approx. 5 minutes
and wipe it off with a lint-free cloth, paper
towel or similar material.
4. Carefully push the dipstick all the way into
the guide tube and pull it out again.
The oil level should be between the two
marks on the dipstick.
203
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
MOBILITY Engine compartment
Notes
Do not use oil additives as this could result
in engine damage.<
When choosing oil, ensure that it belongs
to one of the SAE viscosity classes 0W-40,
0W-30, 5W-40 and 5W-30; otherwise, malfunc-
tions and damage to the engine may result.<
The oil quantity corresponding to the difference The engine oil quality is critical for the life of the
between the two marks on the dipstick is engine.
1 US quart/1 liter. Some types of oil may not be available in every
Do not fill beyond the upper mark on the country.
dipstick. Excess oil will damage the
engine.< Approved oil types
ProCarManuals.com
BMW Longlife-01
BMW Longlife-01 FE
204
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Engine compartment MOBILITY
Coolant temperature
ProCarManuals.com
205
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
MOBILITY Maintenance
Maintenance
206
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Maintenance MOBILITY
Emissions
The warning lamps come on. The vehicle
is producing higher emissions. You can
continue your journey, but moderate
your speed and exercise due caution.
Have the car checked as soon as possible.
Under certain circumstances, one of the lamps
will flash or light up continuously. This indicates
excessive misfiring or a malfunction in the
engine. If this happens, reduce your speed and
visit the nearest MINI dealer as soon as possible.
Severe misfiring can quickly lead to serious dam-
age of emissions-related components, espe-
cially the catalytic converter. In addition,
mechanical engine components can become
damaged.
If the fuel cap is not properly tightened,
the OBD system may conclude that fuel
vapors are escaping, causing an indica-
tor to light up. If the fuel cap is then tightened,
the indicator should go out within a few days.
207
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
MOBILITY Care
Care
208
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Care MOBILITY
209
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
MOBILITY Care
210
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Care MOBILITY
Decorative strips
Only clean decorative strips with moist cloths.
Wipe dry with a soft cloth.
ProCarManuals.com
Safety belts
Dirty belt straps impede the reeling action and
thus have a negative impact on safety.
Do not clean chemically, as this may
destroy the webbing.<
Displays
To clean displays, such as the radio or display
elements, use an anti-static microfiber cloth.
Avoid pressing too hard when cleaning
the display as this can cause damage.<
Do not use chemical or abrasive house-
hold cleaning agents. Keep fluids of any
kind away from the device. Surfaces or electrical
components may otherwise become corroded
or damaged.<
CD/DVD drives
Do not use cleaning CDs as this could
damage parts of the drive.<
211
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
MOBILITY Replacing components
Replacing components
Wiper blades
1. Fold out the wiper arm and hold it.
Do not place windshield wipers on the 2. Rotate the wiper blade toward the back as
windshield if wiper blades are not
ProCarManuals.com
2. Press together the locking spring, arrows 1, Never touch the glass of new bulbs with
and fold out the wiper blade, arrow 2. your bare fingers, as even minute
amounts of contamination will burn into the
3. Pull the wiper blade forward and out of the
bulb's surface and reduce its service life. Use a
catch mechanism.
clean tissue, cloth or something similar, or hold
4. Press the new wiper blade into the fixture the bulb by its base.<
until it engages audibly.
You can obtain a selection of replacement bulbs
To avoid damage, make sure that the at your MINI dealer.
wiper arms are against the windshield
Only replace bulbs after they have cooled
before you open the hood.<
down; otherwise, you may burn your fin-
gers.<
212
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Replacing components MOBILITY
When working on electrical systems, less, switch on the fog lamps and continue the
always begin by switching off the con- journey with great care, provided that local leg-
sumer in question; otherwise, short circuits islation does not prohibit this.
could result. To avoid possible injury or equip- Work on the xenon lighting system,
ment damage when replacing bulbs, observe including lamp replacement, is only to be
any instructions provided by the bulb manufac- carried out only by your MINI dealer. Due to high
turer.< voltage, there is a risk of fatal injury if work on
Caring for headlamps, refer to page 209. the xenon lamps is carried out improperly.<
For any bulb replacement not described
below, contact a MINI dealer or a work- Halogen low beams and high beams
shop that has specially trained personnel work- H13 bulb, 60/55 watts
ing in accordance with the specifications of the The H13 bulb is pressurized. Therefore,
MINI manufacturer.< wear safety glasses and protective gloves.
For checking and adjusting headlamp aim, Otherwise, there is a risk of injury if the bulb is
please contact your MINI dealer.< damaged.<
Be careful when installing the cover;
ProCarManuals.com
213
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
MOBILITY Replacing components
1 Turn signal
2 Parking/roadside parking/fog lamps
214
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Replacing components MOBILITY
1 Brake/tail lamp
2 Turn signal
3 Brake/tail lamp
4 Backup lamps
5 Backup lamps
Changing
5. To insert the new bulb and replace the
All bulbs are integrated in a central bulb holder.
cover, proceed in reverse order.
1. Switch off the light and remove the infrared
Side turn signals remote control from the ignition lock.
5 watt bulb, W 5 W 2. Push the cover panel out from the rear of the
1. Open hood. cargo area side trim panel and remove it.
215
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
MOBILITY Replacing components
Preparations
Use of the MINI Mobility Kit may be ineffective if
the tire puncture measures approx. 1/8 in/4 mm
or more. Contact the nearest MINI dealer if the
1. Using a screwdriver, push the lamp to the tire cannot be made drivable with the Mobility
left in the tab of the lamp housing, arrow 1. Kit.
2. Remove the lamp, arrow 2. Do not remove foreign bodies which have pen-
3. Replace the bulb. etrated the tire if possible.
4. Insert the lamp. Follow the instructions on using the Mobil-
ity Kit found on the compressor and the
Center brake lamp sealant bottle.<
This lamp uses LED technology for operation. In Remove the adhesive label for the speed limit
the event of a malfunction, contact your MINI from the sealant bottle and affix it to the steer-
dealer or a workshop that has specially trained ing wheel.
personnel working in accordance with the spec-
ifications of your MINI manufacturer.
216
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Replacing components MOBILITY
217
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
MOBILITY Replacing components
about 5 bar/73 psi. Do not switch off the Correct the tire inflation pressure.
compressor during this phase.< 1. After driving approx. 3 miles/5 km or ten
Do not run the compressor for longer minutes, stop at a suitable location.
than 10 minutes; otherwise, the 2. Screw the connection hose 6 of the com-
device will overheat and possibly be dam- pressor directly onto the tire valve.
aged.<
3. Insert the plug 5 into the power socket in
8. Switch off the compressor. the vehicle interior.
If an inflation pressure of 1.8 bar/26 psi is not 4. Adjust tire pressure to 1.8 bar/26 psi. With
reached: the engine running:
1. Unscrew the filling hose 2 from the wheel > To increase the inflation pressure: switch on
and drive the vehicle forward and backward the compressor. To check the current infla-
approx. 33 ft/10 m to distribute the liquid tion pressure, switch off the compressor.
sealant in the tire evenly.
Do not run the compressor for longer
2. Inflate the tire again with the compressor. than 10 minutes; otherwise, the
If an inflation pressure of 1.8 bar/26 psi device will overheat and possibly be dam-
ProCarManuals.com
218
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Replacing components MOBILITY
219
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
MOBILITY Replacing components
anced.
In some cases, stations may have to be
stored again, page 137.
> Onboard monitor
Vehicle battery
Operability must be waited for, page 112.
Battery replacement
Fuses
Only use vehicle batteries that have been Do not attempt to repair a blown fuse or
approved for your vehicle by the manu- replace it with a fuse of a different color or
facturer; otherwise, the vehicle could be dam- Ampere rating. To do this could cause a fire in
aged and systems or functions may not be fully the vehicle resulting from a circuit overload.
available.< Have fuses replaced by your MINI dealer.<
After a battery replacement, have the battery A fuse allocation diagram is located on the inside
registered on the vehicle by your MINI dealer to of the fuse box cover panels.
ensure that all comfort functions are fully avail-
able.
220
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Replacing components MOBILITY
221
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
MOBILITY Giving and receiving assistance
Roadside Assistance
Roadside Assistance is available by phone In the cargo area under the loading sill.
24 hours a day in many countries. You can
ProCarManuals.com
Preparation
1. Check whether the battery of the other vehi-
cle has a voltage of 12 volts and approxi-
The first aid pouch is located on the rear cargo mately the same capacitance in Ah. This
well by the left side trim panel or under the pull- information can be found on the battery.
out floor panel. 2. Switch off the engine of the support vehicle.
3. Switch off any consumers in both vehicles.
There must not be any contact between
the bodies of the two vehicles; otherwise,
there is a danger of shorting.<
222
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Giving and receiving assistance MOBILITY
2. Release the tabs on the left and right sides of 1. Start the engine of the donor vehicle and
the positive terminal cover, arrows 1, and lift allow it to run for a few minutes at slightly
the cover to open, arrow 2. increased idle speed.
2. Start the engine of the vehicle to be started
in the usual manner.
If the first start attempt is not successful,
wait a few minutes before another attempt
in order to allow the discharged battery to
recharge.
3. Let the engines run for a few minutes.
4. Disconnect the jumper cables by reversing
the above connecting sequence.
3. Attach one terminal clamp of the plus/+ If necessary, have the battery checked and
jumper cable to the positive terminal of the recharged.
battery or to a starting-aid terminal of the Never use spray fluids to start the
vehicle providing assistance. engine.<
4. Attach the second terminal clamp of the
plus/+ jumper cable to the positive terminal
of the battery or a starting-aid terminal of Tow-starting, towing
the vehicle to be started. away
5. Attach one terminal clamp of the minus/–
jumper cable to the negative terminal of the Observe applicable laws and regulations
battery or to an engine or body ground of for tow-starting and towing.<
the assisting vehicle. Do not transport any passengers other
than the driver in a vehicle that is being
towed.<
223
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
MOBILITY Giving and receiving assistance
With towbar
The towing vehicle must not be lighter
than the towed vehicle; otherwise, it may
be impossible to maintain control.<
The tow fittings used should be on the same side
Rear on both vehicles. Should it prove impossible to
avoid mounting the tow bar at an angle, please
observe the following:
> Clearance and maneuvering capability will
be sharply limited during cornering.
> The tow bar will generate lateral forces if it is
attached offset.
Only attach the tow bar to the tow fittings,
as attachment to other vehicle parts can
lead to damage.<
224
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Giving and receiving assistance MOBILITY
225
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
ProCarManuals.com
Find Me.
CONTROLS
DRIVING TIPS
ProCarManuals.com
NAVIGATION
ENTERTAINMENT
COMMUNICATIONS
MOBILITY
REFERENCE
Technical data
Vehicle equipment
In this chapter, all production, country, and that is not available because of, for example,
optional equipment that is offered in the model selected options or country version. This also
range is described. Equipment is also described applies to safety related functions and systems.
Engine data
Cooper Cooper S
Number of cylinders 4 4
Overboost briefly raises the maximum torque at high rates of acceleration, e.g. when passing.
228
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Technical data REFERENCE
Dimensions
ProCarManuals.com
Cooper Cooper S
229
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
REFERENCE Technical data
Cooper Cooper S
Weights
Cargo area capacity cu ft/ 12.4 - 41.3/ 12.4 - 41.3/ 12.4 - 41.3/
liters 350 - 1,170 350 - 1,170 350 - 1,170
230
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Technical data REFERENCE
Capacities
231
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
REFERENCE Short commands for the voice activation system
Function Command
232
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Short commands for the voice activation system REFERENCE
CD/Multimedia
CD drive
Function Command
Playing a CD {C D on}
Selecting a CD {Select C D}
CD {C D}
External devices
Function Command
Tone control
Function Command
233
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
REFERENCE Short commands for the voice activation system
Radio
FM
Function Command
Selecting FM stations {F M}
AM
Function Command
Selecting AM stations {A M}
Satellite radio
Function Command
234
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Short commands for the voice activation system REFERENCE
Stored stations
Function Command
Telephone
Function Command
ProCarManuals.com
To redial {Redial}
Office
Function Command
235
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
REFERENCE Short commands for the voice activation system
Function Command
Contacts
Function Command
Navigation
General information
Function Command
236
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Short commands for the voice activation system REFERENCE
Function Command
Map
Function Command
237
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
REFERENCE Short commands for the voice activation system
Function Command
Vehicle information
Function Command
Settings
Vehicle
Function Command
238
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Short commands for the voice activation system REFERENCE
Function Command
239
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
REFERENCE Everything from A to Z
Everything from A to Z
Index
A Airing, refer to Ventilation 89 Ashtray 97
Air outlets, refer to Air vents 85 Assistant systems, refer to
ABS Antilock Brake System 70 Air pressure, checking, refer to – Dynamic Stability Control
Accepting a call 161, 172 Tire inflation pressure 194 DSC 70
Accessories, refer to Vehicle Air recirculation, refer to Audio 134
equipment 4 Recirculated-air – controls 134
Acknowledgment signals for mode 86, 88 – switching on/off 134
locking/unlocking vehicle 28 Air supply – tone control 135
Activated-charcoal filter for – air conditioner 86 – volume 135
automatic climate control 89 – automatic climate control 87 Audio device, external 94
Adaptive Light Control 82 – ventilation 89 Automatic
ProCarManuals.com
240
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Everything from A to Z REFERENCE
241
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
REFERENCE Everything from A to Z
242
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Everything from A to Z REFERENCE
243
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
REFERENCE Everything from A to Z
Engine coolant, refer to External temperature display Flat tires, refer to Tire
Coolant 205 – change units of measure 62 condition 199
Engine malfunction – in the onboard computer 62 Floor mats, care 210
– indicator lamp 13 External temperature Floor plate, refer to Flat load
Engine oil warning 59 floor 104
– additives, refer to Approved Eyes FM, waveband 137
engine oils 204 – for tow-starting and towing Fog lamps
– alternative oil types 204 away 224 – replacing bulb 214
– approved engine oils 204 – for tying down loads 106 Folding rear seat backrest 102
– capacity 204 Footbrake, refer to Braking
– checking level 203 F safely 101
– dipstick 203 Footwell lamps 84
– intervals between changes, Failure messages, refer to For your own safety 5
refer to Service Check Control 65 Four-wheel drive, refer to
requirements 62 Failure of an electrical ALL4 72
– MINI Maintenance consumer 220 Front airbags 78
System 206 Fastening safety belts, refer to Front fog lamps 83
ProCarManuals.com
Engine oil level, checking 203 Safety belts 40 – replacing bulb 214
Engine output, refer to Engine Fastest route for Front seat adjustment 38
data 228 navigation 123 Frost on windows, refer to
Engine starting, refer to Fast forward Defrosting windows 87, 89
Starting the engine 49 – CD player 145 FTM, refer to Flat Tire
Entering destination 114 Fault messages, refer to Check Monitor 73
Entering intersection 115 Control 65 Fuel 193
Entertainment sound output Faulty tire 73 – gauge 58
on/off 134 Filter – high-quality brands 193
Entry map for destination 119 – microfilter/activated- – quality 193
ESP Electronic Stability charcoal filter for automatic – specifications 193
Program, refer to Dynamic climate control 89 – tank capacity 231
Stability Control DSC 70 – microfilter for air Fuel clock, refer to Fuel
Exhaust system, refer to Hot conditioner 87 gauge 58
exhaust system 101 Fine wood, care 211 Fuel consumption display
Exterior mirrors 42 First aid pouch 222 – average fuel consumption 59
– adjusting 42 Fixture for remote control, Fuel display, refer to Fuel
– automatic dimming refer to Ignition lock 48 gauge 58
feature 43 Flash when locking/ Fuel filler flap 192
– automatic heating 42 unlocking 28 – releasing in the event of
– folding in and out 42 Flat load floor 104 electrical malfunction 192
External audio device 94 Flat tire Fuses 220
External audio device, refer to – run-flat tires 200
AUX-In connection 146 – Tire Pressure Monitor TPM 75 G
External care 208 Flat Tire Monitor FTM 73
External devices – indicating a flat tire 73 Garage door opener, refer to
– random play sequence 149 – initializing the system 73 Integrated universal remote
– software update 153 – snow chains 73 control 90
– system limits 73
244
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Everything from A to Z REFERENCE
245
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
REFERENCE Everything from A to Z
Interactive map 120 Lashing eyes, refer to Securing Lower back support, refer to
Interesting destination for cargo 106 Lumbar support 38
navigation 118 Last destinations 117 Luggage compartment
Interior lamps 84 LATCH child restraint fixing – doors, refer to Tailgate 30
– remote control 28 system 45 Luggage compartment
Interior rearview mirror 43 Leather care 210 partition net, refer to Cargo
– automatic dimming LEDs light-emitting diodes 213 net 104
feature 43 Length, refer to Luggage rack, refer to Roof-
Interlock 51 Dimensions 229 mounted luggage rack 107
Intermittent mode of the License plate lamp Lumbar support 38
wipers 53 – bulb replacement 216
Internal care 210 Light M
Internet page 4 – automatic headlamp
control 81 M+S tires, refer to Winter
J Light alloy wheels, care 210 tires 201
Light-emitting diodes Main menu 17
Jacking points 219 LEDs 213 Maintenance, refer to Service
ProCarManuals.com
246
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Everything from A to Z REFERENCE
Menus, refer to Onboard Multifunction switch, refer to Nylon rope, refer to Tow
computer 16 – Turn signals/headlamp rope 225
Messages 183 flasher 53
Microfilter – Wiper system 53 O
– for air conditioner 87
– for automatic climate N OBD socket, refer to Socket for
control 89 On-Board Diagnosis 207
– MINI Maintenance Navigation data 112 Octane ratings, refer to Fuel
System 206 Navigation destination specifications 193
Microfilter/activated-charcoal – entering manually 114, 120 Odometer 59
filter – home address 117 Office 180
– MINI Maintenance Navigation instructions, refer – current office 180
System 206 to Switching voice – What to do if…. 186
Microphone for telephone 14 instructions on/off 127 Oil, refer to Engine oil 203
MINI Connected 188 Navigation system 112 Oil consumption 203
MINI Internet page 4 – address book 116 Oil level 203
MINI joystick, refer to Onboard – bypassing a route Oil types 204
ProCarManuals.com
247
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
REFERENCE Everything from A to Z
P R Reception
– quality 138
Paintwork, care 209 Radio – radio station 138
Park Distance Control PDC 69 – controls 134 Recirculated-air mode 86, 88
Parking – HD Radio 138 Recirculation of air, refer to
– vehicle 49 – satellite radio 139 Recirculated-air
Parking aid, refer to Park – select waveband 137 mode 86, 88
Distance Control PDC 69 – storing stations 138 Reclining seat, refer to
Parking brake 50 – switching on/off 134 Backrest 38
– indicator lamp 13 – tone control 135 Refueling 192
Parking lamps, replacing – volume 135 Rejecting a call 161, 173
bulb 214 Radio key, refer to Integrated Releasing
Parking lamps/low beams 81 key/remote control 26 – hood 203
Parts and accessories, refer to Radio position, refer to Radio Reminders 185
Vehicle equipment 4 readiness 48 Remote control 26
Pathway lighting 82 Radio readiness 48 – battery renewal 34
Personal Profile 26 – switched off 49 – Comfort Access 32
ProCarManuals.com
248
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Everything from A to Z REFERENCE
249
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
REFERENCE Everything from A to Z
250
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
Everything from A to Z REFERENCE
251
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
REFERENCE Everything from A to Z
252
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG
*BL2904220009*
ProCarManuals.com
01 40 2 904 220 ue
DRIVE ME.
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG