Professional Documents
Culture Documents
for Vehicle
Controls Reference
34 Opening and closing 250 Technical data
51 Settings 255 Appendix
62 Transporting children safely 256 Everything from A to Z
66 Driving
81 Displays
97 Lights
102 Safety
125 Driving stability control systems
131 Driving comfort
153 Climate control
160 Interior equipment
169 Storage compartments
Driving tips
176 Things to remember when driving
180 Loading
183 Saving fuel
Information
Using this Owner's Manual Additional sources of
information
Orientation
The fastest way to find information on a partic‐ Dealer’s service center
ular topic is by using the index. A dealer’s service center will be glad to answer
An initial overview of the vehicle is provided in additional questions at any time.
the first chapter.
Internet
Updates made after the editorial Owner's Manual and general information about
deadline BMW, such as about the technology, in the In‐
Due to updates after the editorial deadline, dif‐ ternet: www.bmwusa.com.
ferences may exist between the printed Own‐
er's Manual and the following Owner's Man‐ BMW Driver’s Guide App
uals:
The Owner's Manual is available
▷ Integrated Owner's Manual in the vehicle. in many countries as an app. Ad‐
▷ Online Owner's Manual. ditional information on the Inter‐
net:
▷ BMW Driver’s Guide app.
Notes on updates can be found in the appen‐
www.bmw.com/bmw_drivers_guide
dix of the printed Owner's Manual for the vehi‐
cle.
6
Online Edition for Part no. 01 40 2 973 324 - VI/16
Information
When using these functions and systems, the ▷ Information on the vehicle. Do not remove
applicable country provisions must be ob‐ stickers.
served. ▷ Technical vehicle data.
For any options and equipment not described ▷ The laws and safety standards applicable
in this Owner's Manual, refer to the Supple‐ in the country, where the vehicle is driven.
mentary Owner's Manuals. ▷ Vehicle documents and statutory docu‐
On right-hand drive vehicles, some control ele‐ ments.
ments are arranged differently from what is
shown in the illustrations. Warranty
Your vehicle is technically configured for the
operating conditions and registration require‐
7
Online Edition for Part no. 01 40 2 973 324 - VI/16
Information
ments applying in the country of first delivery, approval was issued. BMW does not evaluate
also known as homologation. If your vehicle is whether these products are suitable for BMW
to be operated in a different country it might be vehicles under all usage conditions.
necessary to adapt your vehicle to potentially
differing operating conditions and permit re‐ California Proposition 65 Warning
quirements. If your vehicle does not comply California laws require us to state the following
with the homologation requirements in a cer‐ warning:
tain country you may not be able to lodge war‐
Engine exhaust and a wide variety of automo‐
ranty claims for your vehicle there. Further in‐
bile components and parts, including compo‐
formation on warranty is available from a
nents found in the interior furnishings in a vehi‐
dealer’s service center.
cle, contain or emit chemicals known to the
State of California to cause cancer and birth
Maintenance and repairs
defects and reproductive harm. In addition,
Advanced technology, e.g., the use of modern certain fluids contained in vehicles and certain
materials and high-performance electronics, products of component wear contain or emit
requires suitable maintenance and repair work. chemicals known to the State of California to
The manufacturer of the vehicle recommends cause cancer and birth defects or other repro‐
that you entrust corresponding procedures to ductive harm. Battery posts, terminals and re‐
a BMW dealer’s service center. If you choose lated accessories contain lead and lead com‐
to use another service facility, BMW recom‐ pounds. Wash your hands after handling. Used
mends use of a facility that performs work, e.g., engine oil contains chemicals that have caused
maintenance and repair, according to BMW cancer in laboratory animals. Always protect
specifications with properly trained personnel, your skin by washing thoroughly with soap and
referred to in this Owner's Manual as "another water.
qualified service center or repair shop".
If work, e.g., maintenance and repair, is per‐ Service and warranty
formed improperly, there is a risk of subse‐ We recommend that you read this publication
quent damage and related safety risks. thoroughly. Your vehicle is covered by the fol‐
lowing warranties:
Parts and accessories ▷ New Vehicle Limited Warranty.
BMW recommends the use of parts and ac‐ ▷ Rust Perforation Limited Warranty.
cessory products approved by BMW.
▷ Federal Emissions System Defect War‐
Approved parts and accessories, and advice ranty.
on their use and installation are available from
▷ Federal Emissions Performance Warranty.
a BMW dealer's service center.
▷ California Emission Control System Lim‐
BMW parts and accessories have been tested
ited Warranty.
by BMW for their safety and suitability in BMW
vehicles. Detailed information about these warranties is
listed in the Service and Warranty Information
BMW warrants genuine BMW parts and acces‐
Booklet for US models or in the Warranty and
sories.
Service Guide Booklet for Canadian models.
BMW does not evaluate whether each individ‐
Your vehicle has been specifically adapted and
ual product from another manufacturer can be
designed to meet the particular operating con‐
used with BMW vehicles without presenting a
ditions and homologation requirements in your
safety hazard, even if a country-specific official
country and continental region in order to de‐
8
Online Edition for Part no. 01 40 2 973 324 - VI/16
Information
liver the full driving pleasure while the vehicle ▷ Malfunctions and faults in important sys‐
is operated under those conditions. If you wish tem components, e.g., lights and brakes.
to operate your vehicle in another country or ▷ Responses by the vehicle to special situa‐
region, you may be required to adapt your ve‐ tions such as airbag deployment or en‐
hicle to meet different prevailing operating gagement of the stability control systems.
conditions and homologation requirements.
▷ Ambient conditions, such as temperature.
You should also be aware of any applicable
warranty limitations or exclusions for such This data is purely technical in nature and is
country or region. In such case, please contact used to detect and correct faults and to opti‐
Customer Relations for further information. mize vehicle functions. Motion profiles over
routes traveled cannot be created from this
Maintenance data. When service offerings are used, e.g., re‐
pair services, service processes, warranty
Maintain the vehicle regularly to sustain the
claims, quality assurance, this technical infor‐
road safety, operational reliability and the New
mation can be read out from the event and
Vehicle Limited Warranty.
fault memories by employees of a dealer’s
Specifications for required maintenance meas‐ service center or another qualified service cen‐
ures: ter or repair shop, including the manufacturer,
▷ BMW Maintenance system using special diagnostic tools. You can obtain
▷ Service and Warranty Information Booklet further information there if you need it. After an
for US models error is corrected, the information in the fault
memory is deleted or overwritten on a continu‐
▷ Warranty and Service Guide Booklet for
ous basis.
Canadian models
With the vehicle in use there are situations
If the vehicle is not maintained according to
where you can associate this technical data
these specifications, this could result in seri‐
with individuals if combined with other infor‐
ous damage to the vehicle. Such damage is
mation, e.g., an accident report, damage to the
not covered by the BMW New Vehicle Limited
vehicle, eye witness accounts — possibly with
Warranty.
the assistance of an expert.
Additional functions that are contractually
agreed with the customer — such as vehicle
Data memory emergency locating — allow certain vehicle
Many electronic components on your vehicle data to be transmitted from the vehicle.
are equipped with data memories that tempo‐
rarily or permanently store technical informa‐
tion about the condition of the vehicle, events Event Data Recorder EDR
and faults. This technical information generally
records the state of a component, a module, a This vehicle is equipped with an event data re‐
system or the environment: corder EDR. The main purpose of an EDR is to
record, in certain crash or near crash-like situa‐
▷ Operating states of system components,
tions, such as an air bag deployment or hitting
e.g., fill levels.
a road obstacle, data that will assist in under‐
▷ Status messages for the vehicle and from standing how a vehicle’s systems performed.
its individual components, e.g., wheel rota‐ The EDR is designed to record data related to
tion speed, wheel speed, deceleration, vehicle dynamics and safety systems for a
transverse acceleration.
9
Online Edition for Part no. 01 40 2 973 324 - VI/16
Information
10
Online Edition for Part no. 01 40 2 973 324 - VI/16
Information
11
Online Edition for Part no. 01 40 2 973 324 - VI/16
Online Edition for Part no. 01 40 2 973 324 - VI/16
At a glance
These overviews of buttons, switches and
displays are intended to familiarize you with your
vehicle. Moreover, you will become familiar with
the available control concepts and options
quickly.
Cockpit
Vehicle features and options to the selected options or country versions.
This also applies to safety-related functions
This chapter describes all standard, country- and systems. When using these functions and
specific and optional features offered with the systems, the applicable country provisions
series. It also describes features that are not must be observed.
necessarily available in your vehicle, e. g., due
14
Online Edition for Part no. 01 40 2 973 324 - VI/16
Cockpit At a glance
9 Instrument cluster 81
Low beams 97 10 Steering wheel buttons, right
Entertainment source, see Own‐
Automatic headlamp con‐ er's Manual for Navigation, Enter‐
trol 98 tainment and Communication 6
Rain sensor 73
Roadside parking lights 98
15
Online Edition for Part no. 01 40 2 973 324 - VI/16
At a glance Cockpit
4 Glove compartment 169
10 Driving Dynamics Control 127
5 Radio/CD/multimedia, see Owner's Manual
for Navigation, Entertainment and Commu‐
nication 6 DSC Dynamic Stability Con‐
6 Climate control 153 trol 125
7 Controller with buttons 19
11 Steptronic transmission selector
8 Parking brake 70 lever 76
Manual transmission selector lever 75
16
Online Edition for Part no. 01 40 2 973 324 - VI/16
Cockpit At a glance
17
Online Edition for Part no. 01 40 2 973 324 - VI/16
At a glance iDrive
iDrive
Vehicle features and options Overview of control elements
This chapter describes all standard, country-
Operation
specific and optional features offered with the
series. It also describes features that are not
necessarily available in your vehicle, e. g., due
to the selected options or country versions.
This also applies to safety-related functions
and systems. When using these functions and
systems, the applicable country provisions
must be observed.
Switching on
1. Switch on the ignition.
2. Press the controller.
Switching off
1. Press button.
18
Online Edition for Part no. 01 40 2 973 324 - VI/16
iDrive At a glance
19
Online Edition for Part no. 01 40 2 973 324 - VI/16
At a glance iDrive
2. Press.
Button Function
AUDIO Open audio menu last listened to, 2. Press the controller.
switch between audio menus.
TEL Opens the Phone menu. Menu items in the Owner's Manual
In the Owner's Manual, menu items that can be
BACK Open previous panel.
selected are set in quotation marks, e.g.,
OPTION Open the Options menu. "Settings".
20
Online Edition for Part no. 01 40 2 973 324 - VI/16
iDrive At a glance
Opens new panel on top of previous 2. Turn the controller until the desired setting
screen. is displayed.
White arrows pointing to the left or right indi‐ 3. Press the controller.
cate that additional panels can be opened.
Activating/deactivating the functions
Opening the Options menu Several menu items are preceded by a check‐
Press button. box. It indicates whether the function is acti‐
vated or deactivated. Selecting the menu item
activates or deactivates the function.
The "Options" menu is displayed.
Function is activated.
Function is deactivated.
Touchpad
Some iDrive functions can be operated using
the touchpad on the controller.
Selecting functions
Additional options: move the controller to the 1. "Settings"
right repeatedly until the "Options" menu is
2. "Touchpad"
displayed.
3. Select the desired function.
Options menu ▷ "Speller": enter letters and numbers.
The "Options" menu consists of various areas: ▷ "Interactive map": use the interactive
▷ Screen settings, e.g., "Split screen". map.
▷ Control options for the selected main ▷ "Browser": enter Internet addresses.
menu, e.g., for "Radio". ▷ "Audio feedback": pronounces entered
▷ If applicable, further operating options for letters and numbers.
the selected menu, e.g., "Store station".
Entering letters and numbers
Changing settings Entering letters requires some practice at the
1. Select a field. beginning. When entering, pay attention to the
following:
21
Online Edition for Part no. 01 40 2 973 324 - VI/16
At a glance iDrive
Changing settings
You can use the touchpad to change Control
Display settings, e.g., volume. Swipe left or
right accordingly.
22
Online Edition for Part no. 01 40 2 973 324 - VI/16
iDrive At a glance
Symbol Meaning
23
Online Edition for Part no. 01 40 2 973 324 - VI/16
At a glance iDrive
24
Online Edition for Part no. 01 40 2 973 324 - VI/16
iDrive At a glance
General information
On the Control Display:
25
Online Edition for Part no. 01 40 2 973 324 - VI/16
At a glance Voice activation system
26
Online Edition for Part no. 01 40 2 973 324 - VI/16
Voice activation system At a glance
27
Online Edition for Part no. 01 40 2 973 324 - VI/16
At a glance Voice activation system
Information on Emergency
Requests
Do not use the voice activation system to ini‐
tiate an Emergency Request. In stressful situa‐
tions, the voice and vocal pitch can change.
This can unnecessarily delay the establish‐
ment of a phone connection.
Instead, use the SOS button, refer to
page 235, close to the interior mirror.
Environmental conditions
▷ Say the commands, numbers, and letters
smoothly and with normal volume, empha‐
sis, and speed.
▷ Always say commands in the language of
the voice activation system.
▷ Keep the doors, windows, and glass sun‐
roof closed to prevent noise interference.
▷ Avoid making other noise in the vehicle
while speaking.
28
Online Edition for Part no. 01 40 2 973 324 - VI/16
Integrated Owner's Manual in the vehicle At a glance
Scroll forward.
29
Online Edition for Part no. 01 40 2 973 324 - VI/16
At a glance Integrated Owner's Manual in the vehicle
30
Online Edition for Part no. 01 40 2 973 324 - VI/16
Integrated Owner's Manual in the vehicle At a glance
31
Online Edition for Part no. 01 40 2 973 324 - VI/16
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls
The information in this chapter helps you in
confidently operating your vehicle. All features
and accessories that are useful for driving and
your safety, comfort and convenience are
described here.
Safety information
WARNING
People or animals in the vehicle can lock
the doors from the inside and lock themselves
in. The vehicle can then not be opened from
the outside. There is a risk of injury. Take the 1 Unlock
remote control with you so that the vehicle can
2 Lock
be opened from the outside.◀
3 Opening the tailgate
4 Panic mode
34
Online Edition for Part no. 01 40 2 973 324 - VI/16
Opening and closing Controls
Lock
Depending on the settings, refer to page 44,
the following access points are unlocked. Press button on the remote control with
the vehicle locked.
▷ Driver's door and fuel filler flap.
▷ All doors, tailgate, and fuel filler flap. This function is not available, if the interior
In addition, the following functions are exe‐ lamps were switched off manually.
cuted: The light functions may depend on the ambi‐
▷ The settings saved in the driver profile, re‐ ent brightness.
fer to page 42, are applied. If the button is pressed again within 10 sec‐
▷ The interior lights and courtesy lamps are onds after vehicle was locked, the interior mo‐
activated. This function is not available, if tion sensor and tilt alarm sensor of the anti-
the interior lamps were switched off man‐ theft warning system, refer to page 46, are
ually. turned off. After locking, wait 10 seconds be‐
fore pressing the button again.
▷ The welcome lights are switched on, if this
function was activated.
Tailgate
▷ The alarm system, refer to page 45, is
switched off. General information
The light functions may depend on the ambi‐ To avoid locking it into the vehicle, do not
ent brightness. place the remote control in the cargo area.
Depending on your vehicle's equipment and
Convenient opening the country version, it is possible to specify
Press and hold this button on the re‐ whether the doors are also unlocked when un‐
mote control after unlocking. locking with the remote control. Create the
settings, refer to page 44.
The windows and the glass sunroof are
opened, as long as the button on the remote Safety information
control is pressed.
WARNING
Locking Body parts can be jammed when operat‐
1. Close the driver's door. ing the tailgate. There is a risk of injury. Make
sure that the area of movement of the tailgate
2. Press button on the remote control. is clear during opening and closing.◀
▷ All doors, the tailgate, and the fuel filler flap NOTE
are being locked. During opening, the tailgate pivots back
▷ The alarm system, refer to page 45, is and up. There is a risk of property damage.
switched on. Make sure that the area of movement of the
If the vehicle horn honks twice when you lock tailgate is clear during opening and closing.◀
the vehicle, this means that the engine or igni‐
tion is still switched on. In this case, switch off
35
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Opening and closing
Panic mode
New remote controls
You can trigger the alarm system if you find
New remote controls are available from a deal‐
yourself in a dangerous situation.
er’s service center or another qualified service
Press button on the remote control for center or repair shop.
at least 3 seconds.
Blocking remote controls
To switch off the alarm: press any button.
A lost remote control can be blocked by a deal‐
er’s service center or another qualified service
Replacing the battery
center or repair shop.
1. Remove the integrated key from the re‐
mote control, refer to page 37.
Malfunction
2. Place the integrated key underneath the
battery compartment cover, arrow 1, and General information
lift the cover with a lever movement of the A Check Control message is displayed.
integrated key, arrow 2.
Remote control detection by the vehicle may
malfunction under the following circumstan‐
ces:
▷ The battery of the remote control is dis‐
charged. Replace the battery, refer to
page 36.
▷ Interference of the radio connection from
transmission towers or other equipment
with high transmitting power.
3. Using a pointed object, press battery in di‐ ▷ Shielding of the remote control due to
rection of arrow and lift it out. metal objects.
Do not transport the remote control to‐
gether with metal objects.
▷ Interference of the radio connection from
mobile phones or other electronic devices
in direct proximity to the remote control.
Do not transport the remote control to‐
gether with electronic devices.
▷ Interference of radio transmission by a
charging process of a mobile device, e.g.,
4. Insert a type CR 2450 battery with the pos‐ charging of a mobile phone.
itive side facing up. In the case of interference, the vehicle can be
5. Press the cover closed. unlocked and locked from the outside with the
integrated key, refer to page 37.
36
Online Edition for Part no. 01 40 2 973 324 - VI/16
Opening and closing Controls
Removing
Safety information
WARNING
Unlocking from the inside is only possi‐ Unlock or lock the driver's door via the door
ble with special knowledge. lock using the integrated key.
If people must spend a longer time in the vehi‐ The other doors must be unlocked or locked
cle while it is very hot or cold outside, there is a from the inside.
risk of injury or danger to life. Do not lock the
vehicle from the outside when there are people Alarm system
in it.◀
The alarm system is not switched on if the ve‐
hicle is locked with the integrated key.
37
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Opening and closing
The alarm system is triggered when the door is ▷ On the door to be opened, pull the door
opened, if the vehicle has been unlocked via handle twice: the first time unlocks the
the door lock. door, the second time opens it. The other
In order to stop this alarm, unlock vehicle with doors remain locked.
the remote control or switch on the ignition, if
needed, through emergency detection of the
remote control, refer to page 37. Comfort Access
Concept
Button for central locking The vehicle can be accessed without activat‐
system ing the remote control.
All you need to do is to have the remote con‐
General information trol with you, such as in your pants pocket.
In the event of a severe accident, the vehicle is The vehicle automatically detects the remote
automatically unlocked. The hazard warning control when it is in close proximity or in the
system and interior lights come on. vehicle's interior.
Functional requirements
Button for the central locking system. ▷ To lock the vehicle, the remote control
must be located outside of the vehicle near
the doors.
Unlocking and locking
▷ The next unlocking and locking cycle is not
Pressing the central locking system button
possible until after approx. 2 seconds.
locks or unlocks the vehicle with the front
doors closed.
▷ The fuel filler flap remains unlocked.
▷ The vehicle is not secured against theft
when locking.
38
Online Edition for Part no. 01 40 2 973 324 - VI/16
Opening and closing Controls
Unlocking Closing
Grasp the door handle on the driver's or front Touch the surface on the door handle of the
passenger door completely, arrow. driver's or front passenger door, arrow, with
This corresponds with pressing the button your finger and hold it there without grasping
on the remote control. the door handle.
This corresponds with pressing and holding
the button on the remote control.
Locking
In addition to locking, the windows and the
glass sunroof close and the exterior mirrors
fold in.
Open tailgate
General information
If you open the tailgate via Comfort Access,
locked doors will not be unlocked.
Touch the surface on the door handle of the To avoid locking it in the vehicle, do not place
driver's or front passenger door, arrow, with the remote control in the cargo area.
your finger for approx. 1 second without grasp‐
ing the door handle. Safety information
This corresponds with pressing the button WARNING
on the remote control.
Body parts can be jammed when operat‐
ing the tailgate. There is a risk of injury. Make
Convenient closing sure that the area of movement of the tailgate
is clear during opening and closing.◀
Safety information
NOTE
WARNING
During opening, the tailgate pivots back
With convenient closing, body parts can and up. There is a risk of property damage.
be jammed. There is a risk of injury. Make sure Make sure that the area of movement of the
that the area of movement of the doors is clear tailgate is clear during opening and closing.◀
during convenient closing.◀
39
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Opening and closing
Opening WARNING
Body parts can be jammed when operat‐
ing the tailgate. There is a risk of injury. Make
sure that the area of movement of the tailgate
is clear during opening and closing.◀
NOTE
During opening, the tailgate pivots back
and up. There is a risk of property damage.
Make sure that the area of movement of the
tailgate is clear during opening and closing.◀
Press button on the tailgate.
Safety information
WARNING
Opening
Perform the foot movement described earlier.
During no-touch activation, vehicle parts
may be touched, e.g., hot exhaust system. The tailgate opens, regardless of whether it
There is a risk of injury. When moving your was previously locked or unlocked.
foot, make sure you have a firm stance and do Before the opening, the hazard warning sys‐
not touch the vehicle.◀ tem flashes.
40
Online Edition for Part no. 01 40 2 973 324 - VI/16
Opening and closing Controls
Malfunction NOTE
Remote control detection by the vehicle may During opening, the tailgate pivots back
malfunction under the following circumstan‐ and up. There is a risk of property damage.
ces: Make sure that the area of movement of the
▷ The battery of the remote control is dis‐ tailgate is clear during opening and closing.◀
charged. Replace the battery, refer to
page 36. Opening and closing
▷ Interference of the radio connection from
transmission towers or other equipment Opening from the outside
with high transmitting power.
▷ Shielding of the remote control due to
metal objects.
Do not transport the remote control to‐
gether with metal objects.
▷ Interference of the radio connection by
mobile phones or other electronic devices
in direct proximity of the remote control.
Do not transport the remote control to‐
▷ Without Comfort Access: unlock the vehi‐
gether with electronic devices.
cle.
In the case of a malfunction, unlock and lock
Press on the top half of the BMW label.
the vehicle using the buttons of the remote
control or using the integrated key, refer to ▷ Press button on the remote con‐
page 37. trol for approx. 1 second.
As the case may be, the doors are also un‐
locked. Unlocking with the remote control,
Tailgate refer to page 35.
Safety information
WARNING
Body parts can be jammed when operat‐
ing the tailgate. There is a risk of injury. Make
sure that the area of movement of the tailgate
is clear during opening and closing.◀
Grasp the recess grip and pull tailgate down.
41
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Opening and closing
Settings
The settings for the following systems and
functions are saved in the active profile. The
scope of storable settings depends on country
and equipment.
▷ Unlocking and locking.
Pull the handle inside the cargo area. ▷ Lights.
The tailgate unlocks. ▷ Climate control.
▷ Radio.
▷ Instrument cluster.
Personal Profile ▷ Programmable memory buttons.
▷ Volumes, tone.
Concept
▷ Control Display.
Using Personal Profile, individual settings for
several drivers can be saved and called up ▷ Navigation.
again at a later time. ▷ Park Distance Control PDC.
▷ Rearview camera.
General information ▷ Side View.
There are three driver profiles with which per‐
▷ Top View.
sonal vehicle settings can be stored. Every re‐
mote control has one of these driver profiles ▷ Head-up Display.
assigned. ▷ Driving Dynamics Control.
42
Online Edition for Part no. 01 40 2 973 324 - VI/16
Opening and closing Controls
This can be useful for drivers who are using 3. "Export profile"
the vehicle temporarily and do not have their 4. BMW Online: "BMW Online"
own profile. USB interface: "USB device"
On the Control Display: Popular file systems for USB media are sup‐
1. "Settings" ported. FAT32 and exFAT are the recom‐
mended formats for profile export. Other for‐
2. "Profiles" mats may not support the export.
3. "Guest"
The guest profile cannot be renamed. It is not Importing profiles
assigned to the current remote control. Profiles exported via BMW Online can also be
imported via BMW Online.
Renaming profiles Profiles stored on a USB storage device can be
A personal name can be assigned to every pro‐ imported via the USB interface.
file to avoid confusion between the profiles.
43
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Opening and closing
Existing settings are overwritten with the im‐ The entire vehicle is unlocked.
ported profile.
On the Control Display: Tailgate
1. "Settings"
1. "Settings"
2. "Doors/key"
2. "Profiles"
3. Select the symbol.
3. "Import profile"
4. Select the desired function:
4. BMW Online: "BMW Online"
▷ "Tailgate"
USB interface: "USB device"
The tailgate is opened.
Display profile list during start ▷ "Tailgate + door(s)"
The profile list can be displayed during each The tailgate is opened and the doors
start to select the desired profile. are unlocked.
On the Control Display:
Confirmation signals from the vehicle
1. "Settings"
1. "Settings"
2. "Profiles"
2. "Doors/key"
3. Open "Options".
3. Deactivate or activate the desired confir‐
4. "Display user list at startup" mation signals.
▷ With alarm system:
"Acoustic sig. lock/unlock"
Settings
Unlocking is signaled by one honk of
General information the horn.
Depending on the equipment and country- ▷ "Flash when lock/unlock"
specific variant of your vehicle, different open‐ Unlocking is signaled by two flashes,
ing and closing settings are available. locking by one.
These settings are saved in the active driver
profile, refer to page 42. Automatic locking
1. "Settings"
Unlocking 2. "Doors/key"
44
Online Edition for Part no. 01 40 2 973 324 - VI/16
Opening and closing Controls
Adjusting the last seat and mirror Tailgate with the alarm system
position switched on
1. "Settings" The tailgate can be opened even when the
2. "Doors/key" alarm system is switched on.
3. "Last seat position autom." After the tailgate is closed, it is locked and
monitored again provided the doors are
When the vehicle is unlocked, the driver's seat
locked. The hazard warning system flashes
and exterior mirrors resume their last set posi‐
once.
tions.
Panic mode
You can trigger the alarm system if you find
Alarm system yourself in a dangerous situation.
General information Press button on the remote control for
When the vehicle is locked, the vehicle alarm at least 3 seconds.
system reacts to the following changes:
To switch off the alarm: press any button.
▷ Unauthorized opening of a door, the hood
or the tailgate. Indicator lamp on the interior mirror
▷ Movements in the interior.
▷ Changes in the vehicle tilt, e. g., during at‐
tempts at stealing a wheel or when towing
the vehicle.
▷ Disconnected battery voltage.
The alarm system signals these changes visu‐
ally and acoustically:
▷ Acoustic alarm.
▷ By switching on the hazard warning sys‐
▷ The indicator lamp flashes briefly every
tem.
2 seconds:
▷ By flashing the daytime running lights.
The alarm system is switched on.
45
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Opening and closing
▷ The indicator lamp flashes after unlocking Switching off the alarm
until the engine ignition is switched on, but ▷ Unlock the vehicle with the remote control
no longer than approx. 5 minutes: or switch on the ignition, if needed through
An alarm has been triggered. emergency detection of remote control, re‐
fer to page 36.
Tilt alarm sensor ▷ With Comfort Access:
The tilt of the vehicle is monitored. If you are carrying the remote control on
your person, grasp the door handle on the
The alarm system responds in situations such
driver's or front passenger door com‐
as attempts to steal a wheel or when the vehi‐
pletely.
cle is towed.
46
Online Edition for Part no. 01 40 2 973 324 - VI/16
Opening and closing Controls
General information
If closing force exceeds a specific threshold as
a window closes, closing is interrupted.
The window reopens slightly.
Safety information
WARNING
Accessories on the windows such as an‐
Power windows tennas can impact jam protection. There is a
risk of injury. Do not install accessories in the
Safety switch area of movement of the windows.◀
47
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Opening and closing
48
Online Edition for Part no. 01 40 2 973 324 - VI/16
Opening and closing Controls
Comfort position
If the glass sunroof is not completely opened
automatically, the comfort position has been
attained. In this position the wind noises in the
interior are the least.
If desired, continue the movement by pressing
the switch.
Opening/closing the glass sunroof and Closing from the open position
sliding visor together without pinch protection
▷ Press the switch in the de‐ If there is an external danger, proceed as fol‐
sired direction to the resist‐ lows:
ance point and hold it there.
Glass sunroof and sliding vi‐
sor open together as long as
the switch is held down.
The glass sunroof closes as
1. Press the switch forward beyond the re‐
long as the switch is held
sistance point and hold.
down. The sliding visor can
be manually closed. The pinch protection is limited and the
glass sunroof reopens slightly if the closing
▷ Press the switch in the desired direction
force exceeds a certain threshold.
past the resistance point.
2. Press the switch forward again beyond the
The glass sunroof and sliding visor open
resistance point and hold until the glass
automatically.
sunroof closes without jam protection.
The glass sunroof closes automatically. Make sure that the closing area is clear.
The sliding visor can be manually closed.
Pressing the switch upward stops the mo‐
tion.
49
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Opening and closing
General information
After a power failure during the opening or
closing process, the glass sunroof can only be
operated to a limited extent.
The system can be initialized when the vehicle
is stationary and the engine is running.
During the initialization, the glass sunroof
closes without jam protection.
Make sure that the closing area is clear.
50
Online Edition for Part no. 01 40 2 973 324 - VI/16
Settings Controls
Settings
Vehicle features and options the backrest so that it is in the most upright
position as possible and do not adjust again
This chapter describes all standard, country- while driving.◀
specific and optional features offered with the
series. It also describes features that are not WARNING
necessarily available in your vehicle, e. g., due There is a risk of jamming when moving
to the selected options or country versions. the seats. There is a risk of injury or risk of
This also applies to safety-related functions property damage. Make sure that the area of
and systems. When using these functions and movement of the seat is clear prior to any ad‐
systems, the applicable country provisions justment.◀
must be observed.
Manually adjustable seats
Sitting safely Overview
An ideal seating position that meets the needs
of the occupants can make a vital contribution
to relaxed, fatigue-free driving.
The seating position also plays an important
role in an accident in combination with:
▷ Safety belts, refer to page 54.
▷ Head restraints, refer to page 56.
▷ Airbags.
1 Forward/backward
WARNING
With a backrest inclined too far to the
rear, the protective effect of the safety belt
cannot be ensured anymore. There is a risk of
sliding under the safety belt in an accident.
There is a risk of injuries or danger to life. Ad‐
just the seat prior to starting the trip. Adjust
51
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Settings
Pull the lever and slide the seat in the desired Pull the lever and move the seat to the desired
direction. tilt. After releasing the lever, apply your weight
After releasing the lever, move the seat for‐ to the seat or lift it off to make sure the seat
ward or back slightly making sure it engages engages properly.
properly.
Electrically adjustable seats
Height
Overview
General information
The seat setting for the driver's seat is stored
for the profile currently used. When the vehicle
is unlocked via the remote control, the position
is automatically retrieved if the function is acti‐
vated for this purpose.
Pull the lever and apply your weight to the
backrest or lift it off, as necessary.
52
Online Edition for Part no. 01 40 2 973 324 - VI/16
Settings Controls
Push switch up or down. Pull the lever at the front of the seat and adjust
the thigh support.
Seat tilt
Lumbar support
The curvature of the seat backrest can be ad‐
justed in a way that it supports the lumbar re‐
gion of the spine. The lower back and the
spine are supported for upright posture.
▷ Press the front/rear section
of the switch:
The curvature is increased/
decreased.
Move switch up or down.
▷ Press the upper/lower sec‐
tion of the switch:
The curvature is shifted up/
down.
Backrest width
You can change the width of the backrest us‐
ing the side wings to adjust the lateral support.
53
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Settings
Overview
Seat heating
Switching on
Press button once for each tempera‐
ture level.
Seat heating
The maximum temperature is reached when
three LEDs are lit.
Switching on If the trip is continued within approx. 15 mi‐
nutes after a stop, seat heating is activated au‐
Press button once for each tempera‐
tomatically with the temperature selected last.
ture level.
When ECO PRO is activated, the heater output
The maximum temperature is reached when
is reduced.
three LEDs are lit.
If the trip is continued within approx. 15 mi‐
nutes after a stop, seat heating is activated au‐ Switching off
tomatically with the temperature selected last. Press and hold the button, until the
When ECO PRO is activated, the heater output LEDs go out.
is reduced.
54
Online Edition for Part no. 01 40 2 973 324 - VI/16
Settings Controls
The center safety belt buckle of the rear seat is ▷ Wear the safety belt deep on your hips
solely intended for the person sitting in the over your lap. The safety belt may not
middle. press on your stomach.
▷ Do not wear the safety belt on your throat,
General information rub it on sharp edges, guide it or jam it in
Always make sure that safety belts are being across hard or fragile objects.
worn by all occupants before driving off. Al‐ ▷ Avoid thick clothing.
though airbags enhance safety by providing
▷ Re-tighten the safety belt frequently up‐
added protection, they are not a substitute for
ward around your upper body.
safety belts.
Slowly guide the safety belt out of the holder Buckling the safety belt
when fastening it.
The upper shoulder strap's anchorage point
will be correct for adult seat occupants of ev‐
ery build if the seat is correctly adjusted.
Safety information
WARNING
If the safety belt is used by more than
one person, the protective effect of the safety
belt cannot be ensured anymore. There is a Make sure you hear the latch plate engage in
risk of injuries or danger to life. Do not allow the belt buckle.
more than one person to wear a single safety
belt. Infants and children are not allowed on an
occupant's lap, but must be transported and
Unbuckling the safety belt
respectively secured in designated child re‐ 1. Hold the safety belt firmly.
straint systems.◀ 2. Press the red button in the belt buckle.
55
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Settings
Height
Front head restraints Adjust the head restraint so that its center is
approximately at eye level.
Safety information
Distance
WARNING
Adjust the distance so that the head restraint
A missing protective effect due to re‐ is as close as possible to the back of the head.
moved or not correctly adjusted head re‐
If necessary, adjust the distance by adjusting
straints can cause injuries in the head and
the tilt of the backrest.
neck area. There is a risk of injury. Install head
restraints on occupied seats prior to driving
Adjusting the height
and make sure that the center of the head re‐
straint supports the back of the head at eye
level.◀
WARNING
Body parts can be jammed when moving
the head restraint. There is a risk of injury.
Make sure that the area of movement is clear
when moving the head restraint.◀
56
Online Edition for Part no. 01 40 2 973 324 - VI/16
Settings Controls
WARNING
Body parts can be jammed when moving
▷ Forward: pull the top edge of the head re‐
the head restraint. There is a risk of injury.
straint forward, arrow 1.
Make sure that the area of movement is clear
▷ Back: press the button, arrow 2. The head when moving the head restraint.◀
restraint folds as far back as possible.
WARNING
Removing Objects on the head restraint reduce the
Only remove the head restraint if no one will be protective effect in the head and neck area.
sitting in the seat in question. There is a risk of injury.
▷ Do not use seat or head restraint covers.
▷ Do not hang objects, e.g., clothes hangers,
directly on the head restraint.
▷ Only use accessories that have been de‐
termined to be safe for attachment to a
head restraint.
▷ Do not use any accessories, e.g., pillows,
while driving.◀
1. Raise the head restraint up against the re‐ Correctly adjusted head restraint
sistance.
2. Press button, arrow 1, and pull the head re‐ General information
straint out completely. A correctly adjusted head restraint reduces the
risk of injury to cervical vertebrae in the event
of an accident.
Height
Adjust the head restraint so that its center is
approximately at eye level.
57
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Settings
Safety information
WARNING
Using the memory function while driving
can lead to unexpected movements of the
seat. Vehicle control could be lost. There is a
risk of an accident. Only retrieve the memory
▷ To fold down: press the button, arrow 1, function when the vehicle is stationary.◀
and press down the head restraint, arrow 2.
WARNING
▷ To fold up: pull up head restraints.
There is a risk of jamming when moving
the seats. There is a risk of injury or risk of
Removing property damage. Make sure that the area of
Only remove the head restraint if no one will be movement of the seat is clear prior to any ad‐
sitting in the seat in question. justment.◀
58
Online Edition for Part no. 01 40 2 973 324 - VI/16
Settings Controls
Overview Mirrors
Exterior mirrors
General information
The mirror on the passenger side is more
curved than the driver's side mirror.
Depending on the vehicle equipment, the mir‐
ror setting is stored for the profile currently
used. When the vehicle is unlocked via the re‐
mote control, the position is automatically re‐
Storing trieved if this function is active.
1. Switch on the ignition.
2. Set the desired position. Safety information
WARNING
3. Press button. The LED in the but‐ Objects reflected in the mirror are closer
ton lights up. than they appear. The distance to the traffic
4. Press selected button 1 or 2 while the LED behind could be incorrectly estimated, e.g.,
is lit. The LED goes out. while changing lanes. There is a risk of an acci‐
Button was pressed inadvertently: dent. Estimate the distance to the traffic be‐
hind by looking over your shoulder.◀
Press button again.
The LED goes out. Overview
Calling up settings
The stored position is called up automatically.
Press selected button 1 or 2.
The procedure stops when a switch for setting
the seat or one of the memory buttons is
pressed.
While driving, the seat position adjustment on
the driver's side is interrupted after a short
time. 1 Settings 60
2 Left/right, Automatic Curb Monitor
Calling up of a seat position 3 Folding in and out 60
deactivated
After a brief period, calling up stored seat posi‐
Selecting a mirror
tions is deactivated to save battery power.
To change over to the other mirror:
To reactivate calling up of a seat position:
Slide the switch.
▷ Open and close the door or tailgate.
▷ Press a button on the remote control.
▷ Press the Start/Stop button.
59
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Settings
Deactivating
Slide the switch to the passenger side mirror
position.
Folding in and out Turn the knob to reduce the blinding effect by
the interior mirror.
NOTE
Depending on the vehicle width, the ve‐
hicle can be damaged in vehicle washes. There
is a risk of property damage. Before washing,
fold in the mirrors by hand or with the button.◀
Press button.
60
Online Edition for Part no. 01 40 2 973 324 - VI/16
Settings Controls
Overview
Steering wheel
Safety information
WARNING
Steering wheel adjustments while driving Heated steering wheel
can lead to unexpected steering wheel move‐
ments. Vehicle control could be lost. There is a
risk of an accident. Adjust the steering wheel Switching on/off
while the vehicle is stationary only.◀
Press button.
61
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Transporting children safely
62
Online Edition for Part no. 01 40 2 973 324 - VI/16
Transporting children safely Controls
Deactivating airbags
WARNING
The rear safety belts and the front passenger
Active front-seat passenger airbags can
safety belt can be permanently locked to fas‐
injure a child in a child restraint system when
ten child restraint systems.
the airbags are activated. There is a risk of in‐
63
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Transporting children safely
Mounts for the lower LATCH anchors Assembly of LATCH child restraint
The lower anchors may be used to attach the fixing systems
CRS to the vehicle seat up to a combined child 1. Install child restraint system, see manufac‐
and CRS weight of 65 lb/30 kg when the child turer's information.
is restrained by the internal harnesses.
2. Ensure that both LATCH anchors are prop‐
erly connected.
Safety information
WARNING Child restraint system with a tether
If the LATCH child restraint fixing sys‐ strap
tems are not correctly engaged, the protective
effect of the LATCH child restraint fixing sys‐ Mounting points
tem can be limited. There is a risk of injuries or The respective symbol shows the an‐
danger to life. Make sure that the lower an‐ chor for the upper retaining strap.
chors are securely engaged and that the Seats with an upper top tether are
LATCH child restraint fixing system fits se‐ marked with this symbol. It can be found on
curely against the backrest.◀ the rear seat backrest or the rear window shelf.
64
Online Edition for Part no. 01 40 2 973 324 - VI/16
Transporting children safely Controls
Only mount child restraint systems to the up‐ Locking the doors and
per retaining straps.◀
windows in the rear
Routing the retaining strap Rear doors
WARNING
If the upper retaining strap is incorrectly
used for the child restraint system, the protec‐
tive effect can be reduced. There is a risk of in‐
jury. Make sure that the upper retaining strap is
not guided across sharp edges and without
twisting to the upper retaining strap.◀
65
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Driving
Driving
Vehicle features and options Ignition off
Steptronic transmission: press the Start/Stop
This chapter describes all standard, country-
button again without stepping on the brake.
specific and optional features offered with the
series. It also describes features that are not Manual transmission: press the Start/Stop but‐
necessarily available in your vehicle, e. g., due ton again without stepping on the clutch pedal.
to the selected options or country versions. All indicator lights in the instrument cluster go
This also applies to safety-related functions out.
and systems. When using these functions and To save battery power when the engine is off,
systems, the applicable country provisions switch off the ignition and any unnecessary
must be observed. electronic systems/power consumers.
Safety measures
Start/Stop button When switching off the ignition, the selector
lever position P is selected automatically if the
Concept selector lever position D or R is selected.
Pressing the Start/Stop button The ignition is switched off automatically in the
switches the ignition on or off following situations while the vehicle is station‐
and starts the engine. ary and the engine is off:
Steptronic transmission: the en‐ ▷ When locking the vehicle, and when the
gine starts with the brake pedal low beams are activated.
pressed when you press the Start/Stop button.
▷ Shortly before the battery is discharged
Manual transmission: the engine starts with completely, so that the engine can still be
the clutch pedal pressed when the Start/Stop started.
button is pressed.
▷ When opening or closing the driver door, if
the driver's safety belt is unbuckled and
Ignition on the low beams are switched off.
Steptronic transmission: press the Start/Stop ▷ While the driver's safety belt is unbuckled
button, and do not press on the brake pedal at with driver's door open and low beams off.
the same time. The low beams switch to parking lights after
Manual transmission: press the Start/Stop but‐ approx. 15 minutes of no use.
ton without stepping on the clutch pedal.
All vehicle systems are ready for operation. Radio ready state
Most of the indicator and warning lights in the Activate radio-ready state: when the engine is
instrument cluster light up for a varied length running: press the Start/Stop button.
of time. Some electronic systems/power consumers
To save battery power when the engine is off, remain ready for operation.
switch off the ignition and any unnecessary The radio-ready state is switched off automati‐
electronic systems/power consumers. cally in the following situations:
▷ After approx. 8 minutes.
66
Online Edition for Part no. 01 40 2 973 324 - VI/16
Driving Controls
▷ When the vehicle is locked using the cen‐ ▷ On uphill grades or on a downhill slope,
tral locking system. turn the front wheels in the direction of the
▷ Shortly before the battery is discharged curb.
completely, so that the engine can still be ▷ On uphill grades or on a downhill slope,
started. also secure the vehicle, e.g., with a wheel
The radio-ready state remains active if, e.g., chock.◀
the ignition is automatically switched off for the NOTE
following reasons:
In the case of repeated starting attempts
▷ Opening or closing the driver's door. or repeated starting in quick succession, the
▷ Unfastening of the driver's safety belt. fuel is not burned or is inadequately burned.
▷ When automatically switching from low The catalytic converter can overheat. There is
beams to parking lights. a risk of property damage. Avoid repeated
starting in quick succession.◀
If the engine is switched off and the ignition is
switched on, the system automatically
switches to the radio-ready state if the lights Diesel engine
are turned off or, if correspondingly equipped, If the engine is cold and temperatures are be‐
the daytime running lights are activated. low approx. 32 ℉/0 ℃, the start process may
be delayed somewhat due to automatic pre‐
heating.
Starting the engine A Check Control message with yellow
indicator lamp is displayed.
Safety information
DANGER Steptronic transmission
If the exhaust pipe is blocked or ventila‐
tion is insufficient, harmful exhaust gases can Starting the engine
enter into the vehicle. The exhaust gases con‐ 1. Depress the brake pedal.
tain carbon monoxide, an odorless and color‐
2. Press the Start/Stop button.
less but highly toxic gas. In enclosed areas, ex‐
haust gases can also accumulate outside of The ignition is activated automatically for a
the vehicle. There is danger to life. Keep the certain time and is stopped as soon as the en‐
exhaust pipe free and ensure sufficient ventila‐ gine starts.
tion.◀
Manual transmission
WARNING
An unsecured vehicle can begin to move Starting the engine
and possibly roll away. There is a risk of an ac‐ 1. Depress the brake pedal.
cident. Before exiting, secure the vehicle
2. Press on the clutch pedal and shift to neu‐
against rolling.
tral.
In order to ensure that the vehicle is secured
3. Press the Start/Stop button.
against rolling away, observe the following:
The ignition is activated automatically for a
▷ Set the parking brake.
certain time and is stopped as soon as the en‐
gine starts.
67
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Driving
Engine stop
The engine is switched off automatically dur‐
ing a stop under the following conditions:
68
Online Edition for Part no. 01 40 2 973 324 - VI/16
Driving Controls
Safety mode
The display indicates that the
After the engine switches off automatically, it
conditions for an automatic en‐
will not start again automatically if any one of
gine stop have not been met.
the following conditions are met:
▷ The driver's safety belt is unbuckled and
the driver's door is open.
Functional limitations ▷ The hood was unlocked.
The engine is not switched off automatically in Some indicator lights light up for a varied
the following situations: length of time.
▷ External temperature too low. The engine can only be started via the Start/
▷ The external temperature is high and auto‐ Stop button.
matic climate control is running.
Functional limitations
▷ The vehicle's interior has not yet been
heated or cooled to the required level. Even if driving off was not intended, the deacti‐
vated engine starts up automatically in the fol‐
▷ The engine is not yet at operating temper‐
lowing situations:
ature.
▷ Excessive warming of the vehicle's interior
▷ The wheels are at a sharp angle or the
when the cooling function is switched on.
steering wheel is being turned.
▷ The steering wheel is turned.
▷ After driving in reverse.
▷ Steptronic transmission: change from se‐
lector lever position D to R, N or M/S.
69
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Driving
Malfunction
The Auto Start/Stop function no longer
switches off the engine automatically. A Check
Control message is displayed. It is possible to
Press button. continue driving. Have the system checked by
a dealer’s service center or another qualified
▷ LED comes on: Auto Start/Stop function is service center or repair shop.
deactivated.
The engine is started during an automatic
engine stop.
Parking brake
The engine can only be stopped or started Safety information
via the Start/Stop button.
WARNING
▷ LED goes out: Auto Start/Stop function is
activated. An unsecured vehicle can begin to move
and possibly roll away. There is a risk of an ac‐
Switching off the vehicle during an cident. Before exiting, secure the vehicle
automatic engine stop against rolling.
During an automatic engine stop, the vehicle In order to ensure that the vehicle is secured
can be switched off permanently, e.g., when against rolling away, observe the following:
leaving it. ▷ Set the parking brake.
70
Online Edition for Part no. 01 40 2 973 324 - VI/16
Driving Controls
1. "Settings"
Raise lever slightly, press the button and guide
the lever down. 2. "Lighting"
3. "Triple turn signal"
Settings are stored for the profile currently
used.
71
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Driving
Safety information
WARNING
If the wipers start moving in the folded
away state, body parts can be jammed or dam‐
age may occur to parts of the vehicle. There is
a risk of injury or risk of property damage.
Make sure that the vehicle is switched off
when the wipers are in the folded away state
and the wipers are folded in when switching Press the lever down.
on.◀ ▷ To switch off from fast wiper speed: press
down twice.
72
Online Edition for Part no. 01 40 2 973 324 - VI/16
Driving Controls
▷ To switch off from normal wiper speed: Setting the frequency or sensitivity of
press down once. the rain sensor
▷ Single wipe: press down once.
The lever automatically returns to its initial po‐
sition when released.
Concept
The rain sensor automatically controls the time
between wipes depending on the intensity of
the rainfall. Turn the thumbwheel to adjust the frequency
or sensitivity of the rain sensor.
General information Up: short interval or high sensitivity of the rain
The sensor is located on the windshield, di‐ sensor.
rectly in front of the interior mirror. Without the Down: long interval or low sensitivity of the rain
rain sensor, the frequency of the wiper opera‐ sensor.
tion is preset.
NOTE
When the washer fluid reservoir is empty,
the wash pump cannot work as intended.
There is a risk of property damage. Do not use
the washer system when the washer fluid res‐
ervoir is empty.◀
73
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Driving
74
Online Edition for Part no. 01 40 2 973 324 - VI/16
Driving Controls
75
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Driving
Shifting N is Neutral
The vehicle may roll in selector lever posi‐
General information tion N, e.g., in vehicle washes.
The engine speed during a shifting operation is
adjusted automatically for harmonious and dy‐ P Park
namic gear shifting. Select only when the vehicle is stationary. The
drive wheels are blocked.
Reverse gear
Selector lever position P is engaged automati‐
Select only when the vehicle is stationary. cally in the following situations:
To overcome the resistance push the gearshift ▷ After the engine is switched off when the
lever dynamically to the left and engage re‐ vehicle is in radio-ready state, refer to
verse gear with a forward shifting movement. page 66, or when the ignition is switched
off, refer to page 66, and when selector
lever position R or D is set.
Steptronic transmission ▷ If the driver's safety belt is unbuckled, the
driver's door is opened, and the brake
Safety information pedal is not pressed while the vehicle is
WARNING stationary and selector lever position D
An unsecured vehicle can begin to move or R is engaged.
and possibly roll away. There is a risk of an ac‐
cident. Before exiting, secure the vehicle Kickdown
against rolling. Kickdown is used to achieve maximum driving
In order to ensure that the vehicle is secured performance. Step on the accelerator pedal
against rolling away, observe the following: beyond the resistance point at the full throttle
position.
▷ Set the parking brake.
▷ On uphill grades or on a downhill slope, Engaging selector lever positions
turn the front wheels in the direction of the
curb. General information
▷ On uphill grades or on a downhill slope, To prevent the vehicle from creeping after you
also secure the vehicle, e.g., with a wheel select a gear, maintain pressure on the brake
chock.◀ pedal until you are ready to start.
▷ It is not possible to shift out of selector
Selector lever positions lever position P until the engine is running
and the brake is applied.
D Drive
▷ With the vehicle stationary, depress the
Selector lever position for normal vehicle oper‐
brake pedal before shifting out of selector
ation. All gears for forward travel are activated
lever position P or N; otherwise, the shift
automatically.
block will not be deactivated and the shift
command will not be executed.
76
Online Edition for Part no. 01 40 2 973 324 - VI/16
Driving Controls
77
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Driving
78
Online Edition for Part no. 01 40 2 973 324 - VI/16
Driving Controls
79
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Driving
80
Online Edition for Part no. 01 40 2 973 324 - VI/16
Displays Controls
Displays
Vehicle features and options to the selected options or country versions.
This also applies to safety-related functions
This chapter describes all standard, country- and systems. When using these functions and
specific and optional features offered with the systems, the applicable country provisions
series. It also describes features that are not must be observed.
necessarily available in your vehicle, e. g., due
Electronic displays
▷ Selection lists, refer to page 90. ▷ Date, refer to page 87.
▷ External temperature, refer to page 86. ▷ Energy recovery, refer to page 87.
▷ Auto Start/Stop function, refer to page 69. ▷ Transmission display, refer to page 79.
▷ Onboard computer, refer to page 91. ▷ Miles/trip miles, refer to page 86.
81
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Displays
Indicator/warning lights
Approach control warning
General information
Indicator lamp illuminates: advance
The indicator and warning lights in the instru‐
warning is issued, for example when
ment cluster can light up in a variety of combi‐
there is the impending danger of a col‐
nations and colors.
lision or the distance to the vehicle ahead is
Several of the lights are checked for proper too small.
functioning and light up temporarily when the
Increase distance.
engine is started or the ignition is switched on.
Indicator lamp flashes: acute warning of the
imminent danger of a collision when the vehi‐
cle approaches another vehicle at a relatively
high differential speed.
82
Online Edition for Part no. 01 40 2 973 324 - VI/16
Displays Controls
Anti-lock Braking System ABS For more information, see Flat Tire Monitor, re‐
fer to page 110.
Braking force boost may not be work‐
ing. Avoid abrupt braking. Take the lon‐
ger braking distance into account. Tire Pressure Monitor TPM
83
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Displays
The indicator lamp flashes and is then illumi‐ For additional information, refer to Lane depar‐
nated continuously. ture warning, refer to page 120.
No flat tire or loss of tire inflation pressure can
be detected. Green lights
▷ Interference caused by systems or devices
with the same radio frequency: After leav‐ Turn signal
ing the area of the interference, the system Turn signal switched on.
automatically becomes active again.
Unusually rapid flashing of the indicator
▷ TPM was unable to complete the reset. lamp indicates that a turn signal bulb
Reset the system again. has failed.
▷ A wheel without TPM electronics is For additional information, refer to Turn signal,
mounted: Have it checked by a dealer’s refer to page 71.
service center or another qualified service
center or repair shop as needed.
Parking lights, headlight
▷ Malfunction: have the system checked by a
dealer’s service center or another qualified Parking lights or headlights are acti‐
service center or repair shop. vated.
For more information, see Tire Pressure Moni‐ For additional information, refer to
tor, refer to page 105. Parking lights/low beams, headlamp control,
refer to page 97.
Steering system
Front fog lights
Steering system in some cases not
working. Front fog lights are activated.
Have the steering system checked by a For additional information, refer to
dealer’s service center or another qualified Front fog lights, refer to page 100.
service center or repair shop.
High-beam Assistant
Engine functions
High-beam Assistant is switched on.
Engine function impaired. High beams are switched on and off
Have the vehicle checked by a dealer’s automatically depending on the traffic
service center or another qualified situation.
service center or repair shop. For additional information, refer to High-beam
For additional information, refer to On-board Assistant, refer to page 99.
Diagnostics socket, refer to page 226.
Cruise control
Lane departure warning
The system is switched on. It maintains
System is switched on and under cer‐ the speed that was set using the con‐
tain circumstances warns if a detected trol elements on the steering wheel.
lane is left without flashing beforehand.
84
Online Edition for Part no. 01 40 2 973 324 - VI/16
Displays Controls
High beams
High beams are activated.
For additional information, see High
beams, refer to page 72.
General lamps
Check Control
Press and hold button on signal lever.
At least one Check Control message is
displayed or is stored. ▷ Some Check Control messages are dis‐
played continuously and are not cleared
until the malfunction is eliminated. If sev‐
SMS text messages eral malfunctions occur at once, the mes‐
SMS text messages in combination with a sages are displayed consecutively.
symbol in the instrument cluster explain a These messages can be hidden for approx.
Check Control message and the meaning of 8 seconds. After this time, they are dis‐
the indicator and warning lights. played again automatically.
▷ Other Check Control messages are hidden
Supplementary SMS text messages
automatically after approx. 20 seconds.
Additional information, such as on the cause of They are stored and can be displayed
an error or the required action, can be called up again later.
via Check Control.
With urgent messages the added text will be Displaying stored Check Control
automatically displayed on the Control Display. messages
On the Control Display:
Symbols
Depending on the Check Control message, the 1. "Vehicle info"
following functions can be selected. 2. "Vehicle status"
▷ "Owner's Manual" 3. "Check Control"
Display additional information about the 4. Select the SMS text message.
Check Control message in the Integrated
Owner's Manual. Messages after trip completion
▷ "Service request" Special messages displayed while driving are
Contact a dealer’s service center or an‐ displayed again after the ignition is switched
other qualified service center or repair off.
shop.
▷ "Roadside Assistance"
Contact Roadside Assistance.
85
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Displays
Coolant temperature
If the coolant along with the engine becomes
too hot, a Check Control message is displayed.
A red indicator lamp is displayed.
86
Online Edition for Part no. 01 40 2 973 324 - VI/16
Displays Controls
1. "Settings"
87
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Displays
General information
After the ignition is turned on the instrument The deadline for scheduled mainte‐
cluster briefly displays available driving dis‐ nance or a legally mandated inspec‐
tance or time to the next scheduled mainte‐ tion is approaching.
nance.
The service deadline has already
A service advisor can read out the current passed.
service requirements from your remote con‐
trol.
Entering appointment dates
Display Enter the dates for the required vehicle inspec‐
tions.
Detailed information on service
Make sure that the vehicle's date and time are
requirements
set correctly.
More information on the scope of service re‐
On the Control Display:
quired can be displayed on the Control Dis‐
play. 1. "Vehicle info"
1. "Vehicle info" 2. "Vehicle status"
2. "Vehicle status" 3. "Service required"
3. "Service required" 4. "§ Vehicle inspection"
Required maintenance procedures and le‐ 5. "Date:"
gally mandated inspections are displayed. 6. Adjust the settings.
4. Select an entry to call up detailed informa‐ 7. Confirm.
tion.
The entered date is stored.
1. "Vehicle info"
2. "Vehicle status"
88
Online Edition for Part no. 01 40 2 973 324 - VI/16
Displays Controls
Overview
Shift into neutral.
Camera
Example Description
89
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Displays
Keep the windshield in front of the interior mir‐ ▷ When driving toward bright lights or strong
ror clean and clear. reflections.
▷ When the windshield in front of the interior
Switching on/off mirror is fogged over, dirty or covered by a
sticker, etc.
On the Control Display:
▷ In the event of incorrect detection by the
1. "Settings" camera.
2. "Instrument cluster" ▷ If the speed limits stored in the navigation
3. "Speed limit information" system are incorrect.
If Speed Limit Info is switched on, it can be dis‐ ▷ In areas not covered by the navigation sys‐
played on the CID (central information display) tem.
in the instrument cluster via the onboard com‐ ▷ When roads differ from the navigation,
puter. such as due to changes in road routing.
▷ When passing buses or trucks with a
Display
speed sticker.
The following is displayed in the instrument
▷ If the traffic signs are non-conforming.
cluster:
▷ During calibration of the camera immedi‐
Speed Limit Info ately after vehicle delivery.
Current speed limit. ▷ When signs that are valid for a parallel road
are detected.
90
Online Edition for Part no. 01 40 2 973 324 - VI/16
Displays Controls
On the right side of the steering wheel, turn Press and hold button on signal lever.
the thumbwheel to activate the corresponding Information is displayed in the CID (central in‐
list. formation display) of the instrument cluster.
1. Turn the thumbwheel and select the de‐
sired setting. Information at a glance
2. Press the thumbwheel. Repeatedly pressing the button on the turn
signal lever calls up the following information in
Display the CID (central information display):
▷ Range.
▷ Average consumption, fuel.
▷ Average consumption, fuel.
▷ Average speed.
▷ Date.
▷ Speed limit detection.
▷ Time of arrival.
When destination guidance is activated in
Depending on your vehicle's optional features, the navigation system.
the list in the instrument cluster can differ from
the illustration shown. ▷ Distance to destination.
When destination guidance is activated in
the navigation system.
▷ ECO PRO bonus range.
Onboard computer
Indication in the info display Selecting information
Depending on the vehicle equipment version,
The information from the on‐
you can select what information from the on‐
board computer is shown in the
board computer is to be displayed on the CID
info display in the instrument
(central information display) of the instrument
cluster.
cluster.
91
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Displays
1. "Vehicle info"
Press and hold button on turn signal lever.
2. "Onboard info" or "Trip computer"
92
Online Edition for Part no. 01 40 2 973 324 - VI/16
Displays Controls
4. "Yes" 3. "Warning"
4. Press the controller.
93
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Displays
Date 1. "Settings"
2. "Language/Units"
Setting the date 3. Select the desired menu item.
1. "Settings" 4. Select the desired unit.
2. "Time/Date" Settings are stored for the profile currently
3. "Date:" used.
4. Turn the controller until the desired day is
displayed. Brightness
5. Press the controller.
Setting the brightness
6. Make the necessary settings for the month
To set the brightness of the Control Display:
and year.
The date is stored. 1. "Settings"
2. "Control display"
Setting the date format 3. "Brightness"
1. "Settings" 4. Turn the controller until the desired bright‐
2. "Time/Date" ness is set.
3. "Format:" 5. Press the controller.
4. Select the desired format. Settings are stored for the profile currently
The date format is stored. used.
94
Online Edition for Part no. 01 40 2 973 324 - VI/16
Displays Controls
Concept ▷ Speed.
1. "Settings"
2. "Head-Up Display"
95
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Displays
1. "Settings"
2. "Head-Up Display"
3. "Height"
4. Turn the controller until the desired height
is reached.
5. Press the controller.
Settings are stored for the profile currently
used.
96
Online Edition for Part no. 01 40 2 973 324 - VI/16
Lights Controls
Lights
Vehicle features and options Symbol Function
This chapter describes all standard, country- Parking lights
specific and optional features offered with the
series. It also describes features that are not
necessarily available in your vehicle, e. g., due Low beams
to the selected options or country versions.
This also applies to safety-related functions
and systems. When using these functions and Instrument lighting
systems, the applicable country provisions
must be observed.
Parking lights
Position of switch:
The light switch element is located next to the
steering wheel. The vehicle is illuminated on all sides.
Do not use the parking lights for extended pe‐
Light functions riods; otherwise, they might drain the battery
and it would then be impossible to start the en‐
Symbol Function gine.
When parking, switch on the one-sided road‐
Front fog lights
side parking lamp, refer to page 98.
97
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Lights
Roadside parking lights Settings are stored for the profile currently
used.
Concept
The vehicle can be illuminated on one side. Headlamp courtesy delay feature
1. "Settings"
2. "Lighting"
3. "Pathway lighting:"
With the ignition switched off, press the lever
either up or down past the resistance point for 4. Set length of time.
approx. 2 seconds. Settings are stored for the profile currently
used.
Switching off
Briefly press the lever to the resistance point in
the opposite direction.
Automatic headlamp control
Concept
The low beams are switched on and off auto‐
Welcome lights and
matically depending on the ambient bright‐
headlamp courtesy delay ness, e.g., in tunnels, in twilight or if there is
feature precipitation.
Activating/deactivating
Activating
On the Control Display:
Position of switch:
1. "Settings" The indicator lamp in the instrument cluster is
2. "Lighting" illuminated when the low beams are switched
3. "Welcome lights" on.
98
Online Edition for Part no. 01 40 2 973 324 - VI/16
Lights Controls
99
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Lights
System limits
The high-beam Assistant cannot serve as a
substitute for the driver's personal judgment of
when to use the high beams. Therefore, man‐
100
Online Edition for Part no. 01 40 2 973 324 - VI/16
Lights Controls
101
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Safety
Safety
Vehicle features and options to the selected options or country versions.
This also applies to safety-related functions
This chapter describes all standard, country- and systems. When using these functions and
specific and optional features offered with the systems, the applicable country provisions
series. It also describes features that are not must be observed.
necessarily available in your vehicle, e. g., due
Airbags
102
Online Edition for Part no. 01 40 2 973 324 - VI/16
Safety Controls
103
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Safety
104
Online Edition for Part no. 01 40 2 973 324 - VI/16
Safety Controls
Indicator lamp for the front-seat on the positions of the driver's/front passeng‐
passenger airbags er's seat.
To maintain the accuracy of this function over
the long term, calibrate the front seats as soon
as a respective message appears on the Con‐
trol Display.
105
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Safety
106
Online Edition for Part no. 01 40 2 973 324 - VI/16
Safety Controls
You may interrupt this trip at any time. When 2. At the next opportunity, e.g., gas station,
you continue the reset resumes automatically. check and correct the tire inflation pres‐
sure in all four tires, if necessary.
Messages 3. Reset the system.
Required tire inflation pressure check Message in case of sharp tire inflation
message pressure loss
A Check Control message is displayed. The yellow warning lamp lights up.
▷ The system has detected a wheel In addition, a symbol with the affected
change, but no reset was done. tires will be displayed in the Check
▷ No reset was performed for the system. Control message.
System will issue a warning related to the
tire inflation pressures stored during the ▷ There is a flat tire or a major loss in tire in‐
last reset. flation pressure.
▷ Inflation was not carried out according to ▷ No reset was performed for the system.
specifications. The system issues a warning based on the
tire inflation pressures stored during the
A Check Control message is displayed. last reset.
The tire inflation pressure has fallen In these cases:
below the level of the last reset. 1. Reduce your speed and stop cautiously.
In these cases: Avoid sudden braking and steering maneu‐
vers.
1. Check the tire pressure and correct as 2. Check whether the vehicle is fitted with
needed. normal tires or run-flat tires.
2. Reset the system. Run-flat tires, refer to page 208, are la‐
beled with a circular symbol containing the
Message in case of low tire pressure letters RSC marked on the tire's sidewall.
The yellow warning lamp lights up. WARNING
A damaged regular tire with low or miss‐
A Check Control message is displayed. ing tire inflation pressure impacts handling,
such as steering and braking response. Run-
flat tires can maintain limited stability. There is
▷ There is a tire inflation pressure loss. a risk of an accident. Do not continue driving if
the vehicle is not equipped with run-flat tires.
▷ No reset was performed for the system.
Follow the information on run-flat tires and
System will issue a warning related to the
continued driving with these tires.◀
tire inflation pressures stored during the
last reset. A low tire inflation pressure might turn on DSC
In these cases: Dynamic Stability Control.
107
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Safety
Actions in the event of a flat tire The possible driving distance with a flat tire
depends on cargo load, driving style and road
Normal tires conditions.
1. Identify the damaged tire. A vehicle with an average load has a possible
Check the air pressure in all four tires, e.g., driving range of approx. 50 miles/80 km.
using the tire pressure gage of a tire repair A vehicle with a damaged tire reacts differ‐
kit. ently, e.g., it has reduced lane stability during
If the tire inflation pressure in all four tires braking, a longer braking distance and different
is correct, the Tire Pressure Monitor may self-steering properties. Adjust your driving
not have been reset. In this case, perform style accordingly. Avoid abrupt steering ma‐
the reset. neuvers or driving over obstacles, e.g., curbs,
potholes, etc.
If identification of flat tire damage is not
possible, please contact a dealer’s service Because the possible driving distance de‐
center or another qualified service center pends on how the vehicle is used during the
or repair shop. trip, the actual distance may be shorter or lon‐
ger depending on the driving speed, road con‐
2. Repair the flat tire, e.g., with a tire repair kit
ditions, external temperature, cargo load, etc.
or by changing the tire.
Use of tire sealant, e.g., the Mobility System, WARNING
may damage the TPM wheel electronics. In Your vehicle handles differently when a
this case, have the electronics checked at the run-flat tire is damaged and has low or missing
next opportunity and have them replaced, if tire inflation pressure, e.g., your lane stability is
needed. reduced when braking, braking distances are
longer and the self-steering properties will
Run-flat tires change. There is a risk of an accident.
Drive moderately and do not exceed a speed of
Maximum speed 50 mph/80 km/h.◀
You may continue driving with a damaged tire
at speeds up to 50 mph/80 km/h. Final tire failure
Vibrations or loud noises while driving can indi‐
Continued driving with a flat tire
cate the final failure of a tire.
If continuing to drive with a damaged tire:
Reduce speed and stop; otherwise, pieces of
1. Avoid sudden braking and steering maneu‐ the tire could come loose and cause an acci‐
vers. dent.
2. Do not exceed a speed of 50 mph/80 km/h. Do not continue driving. Contact a dealer’s
3. Check the air pressure in all four tires at service center or another qualified service cen‐
the next opportunity. ter or repair shop.
108
Online Edition for Part no. 01 40 2 973 324 - VI/16
Safety Controls
The tire inflation pressure depends on the proper tire inflation pressure for those tires.)
tire's temperature. Driving or exposure to the As an added safety feature, your vehicle has
sun will increase the tire's temperature, thus been equipped with a tire pressure monitoring
increasing the tire inflation pressure. The tire system (TPMS) that illuminates a low tire pres‐
inflation pressure is reduced when the tire sure telltale when one or more of your tires is
temperature falls again. These circumstances significantly under-inflated. Accordingly, when
may cause a warning when temperatures fall the low tire pressure telltale illuminates, you
very sharply. should stop and check your tires as soon as
The system cannot indicate sudden serious possible, and inflate them to the proper pres‐
tire damage caused by external circumstances. sure. Driving on a significantly under-inflated
tire causes the tire to overheat and can lead to
Malfunction tire failure. Under-inflation also reduces fuel ef‐
ficiency and tire tread life, and may affect the
The yellow warning lamp flashes and vehicle's handling and stopping ability. Please
then lights up continuously. A Check note that the TPMS is not a substitute for
Control message is displayed. No flat proper tire maintenance, and it is the driver's
tire or loss of tire inflation pressure can be de‐ responsibility to maintain correct tire pressure,
tected. even if under-inflation has not reached the
level to trigger illumination of the TPMS low
Examples and recommendations in the follow‐
tire pressure telltale. Your vehicle has also
ing situations:
been equipped with a TPMS malfunction indi‐
▷ A wheel without TPM electronics is cator to indicate when the system is not oper‐
mounted: Have it checked by a dealer’s ating properly. The TPMS malfunction indica‐
service center or another qualified service tor is combined with the low tire pressure
center or repair shop as needed. telltale. When the system detects a malfunc‐
▷ Malfunction: Have system checked by a tion, the telltale will flash for approximately one
dealer’s service center or another qualified minute and then remain continuously illumi‐
service center or repair shop. nated. This sequence will continue upon sub‐
▷ TPM was unable to complete the reset. sequent vehicle start-ups as long as the mal‐
Reset the system again. function exists. When the malfunction indicator
is illuminated, the system may not be able to
▷ Interference caused by systems or devices
detect or signal low tire pressure as intended.
with the same radio frequency: After leav‐
TPMS malfunctions may occur for a variety of
ing the area of the interference, the system
reasons, including the installation of replace‐
automatically becomes active again.
ment or alternate tires or wheels on the vehicle
that prevent the TPMS from functioning prop‐
Declaration according to NHTSA/ erly. Always check the TPMS malfunction tell‐
FMVSS 138 Tire Pressure Monitoring tale after replacing one or more tires or wheels
System on your vehicle to ensure that the replacement
Each tire, including the spare (if provided) or alternate tires and wheels allow the TPMS
should be checked monthly when cold and in‐ to continue to function properly.
flated to the inflation pressure recommended
by the vehicle manufacturer on the vehicle
placard or tire inflation pressure label. (If your
vehicle has tires of a different size than the size
indicated on the vehicle placard or tire inflation
pressure label, you should determine the
109
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Safety
110
Online Edition for Part no. 01 40 2 973 324 - VI/16
Safety Controls
The system could be delayed or malfunction in have been initialized. In this case, initialize
the following situations: the system.
▷ When the system has not been initialized. Possible driving distance with complete loss of
▷ When driving on a snowy or slippery road tire inflation pressure:
surface. The possible driving distance with a flat tire
▷ Sporty driving style: spinning traction depends on cargo load, driving style and road
wheels, high lateral acceleration (drifting). conditions.
▷ When driving with snow chains. A vehicle with an average load has a possible
driving range of approx. 50 miles/80 km.
Actions in the event of a flat tire A vehicle with a damaged tire reacts differ‐
ently, e.g., it has reduced lane stability during
Normal tires braking, a longer braking distance and different
1. Identify the damaged tire. self-steering properties. Adjust your driving
style accordingly. Avoid abrupt steering ma‐
Check the air pressure in all four tires, e.g.,
neuvers or driving over obstacles, e.g., curbs,
using the tire pressure gage of a tire repair
potholes, etc.
kit.
Because the possible driving distance de‐
If the tire inflation pressure in all four tires
pends on how the vehicle is used during the
is correct, the Flat Tire Monitor may not
trip, the actual distance may be shorter or lon‐
have been initialized. In this case, initialize
ger depending on the driving speed, road con‐
the system.
ditions, external temperature, cargo load, etc.
If identification of flat tire damage is not
possible, please contact a dealer’s service WARNING
center or another qualified service center Your vehicle handles differently when a
or repair shop. run-flat tire is damaged and has low or missing
2. Repair the flat tire, e.g., with a tire repair kit tire inflation pressure, e.g., your lane stability is
or by changing the tire. reduced when braking, braking distances are
longer and the self-steering properties will
change. There is a risk of an accident.
Run-flat tires
Drive moderately and do not exceed a speed of
Maximum speed 50 mph/80 km/h.◀
You may continue driving with a damaged tire
at speeds up to 50 mph/80 km/h. Final tire failure
Vibrations or loud noises while driving can indi‐
Continued driving with a flat tire cate the final failure of a tire.
If continuing to drive with a damaged tire: Reduce speed and stop; otherwise, pieces of
1. Avoid sudden braking and steering maneu‐ the tire could come loose and cause an acci‐
vers. dent.
2. Do not exceed a speed of 50 mph/80 km/h. Do not continue driving. Contact a dealer’s
service center or another qualified service cen‐
3. Check the air pressure in all four tires at ter or repair shop.
the next opportunity.
If the tire inflation pressure in all four tires
is correct, the Flat Tire Monitor may not
111
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Safety
WARNING
Indicators and warnings do not relieve
the driver from personal responsibility. Due to
system limits, warnings or reactions of the sys‐
tem may not be output or they may be output
too late or incorrectly. There is a risk of an ac‐
cident. Adjust the driving style to the traffic
conditions. Watch traffic closely and actively
intervene in the respective situations.◀
The camera is installed near the interior mirror.
WARNING Keep the windshield in front of the interior mir‐
Due to system limits, individual functions ror clean and clear.
can malfunction during tow-starting/towing
with the Intelligent Safety systems activated,
Switching on/off
e.g., approach control warning with light brak‐
ing function. There is a risk of an accident. The Intelligent Safety systems are automati‐
Switch all Intelligent Safety systems off prior to cally active after every departure.
tow-starting/towing.◀ Press button: the systems are turned
off. The LED goes out.
Press button: the systems are turned on. The
LED lights up.
112
Online Edition for Part no. 01 40 2 973 324 - VI/16
Safety Controls
General information
The system warns at two levels of an imminent
danger of collision at speeds from approx.
3 mph/5 km/h. Time of warnings may vary with
the current driving situation.
Appropriate braking kicks in at speeds of up to
35 mph/60 km/h.
113
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Safety
Symbol Measure
114
Online Edition for Part no. 01 40 2 973 324 - VI/16
Safety Controls
Acute warnings can also be triggered without ▷ Slow moving vehicles when you approach
previous forewarning. them at high speed.
▷ Vehicles that suddenly swerve in front of
Braking intervention you, or sharply decelerating vehicles.
The warning prompts the driver himself/herself ▷ Vehicles with an unusual rear appearance.
to react. During a warning, the maximum brak‐
▷ Two-wheeled vehicles ahead of you.
ing force is used. Prerequisite for the brake
booster is sufficiently quick and hard stepping
on the brake pedal. The system can assist with
Functional limitations
some braking intervention if there is a risk of a The system may not be fully functional in the
collision. At low speeds vehicles may thus following situations:
come to a complete stop. ▷ In heavy fog, rain, sprayed water or snow‐
Manual transmission: During a braking inter‐ fall.
vention up to a complete stop, the engine may ▷ In tight curves.
be shut down. ▷ If the driving stability control systems are
The braking intervention is executed only if ve‐ limited or deactivated, e.g., DSC OFF.
hicle stability has not been restricted, e.g., by ▷ If, depending on the vehicle equipment
deactivating the DSC Dynamic Stability Con‐ version, the field of view of the camera in
trol. the mirror or the radar sensor is dirty or ob‐
The braking intervention can be interrupted by scured.
stepping on the accelerator pedal or by ac‐ ▷ Up to 10 seconds after the start of the en‐
tively moving the steering wheel. gine via the Start/Stop button.
Object detection can be restricted. Observe ▷ During calibration of the camera immedi‐
the limitations of the detection range and func‐ ately after vehicle delivery.
tional restrictions.
▷ If there are constant blinding effects be‐
cause of oncoming light, e.g., from the sun
System limits
low in the sky.
Safety information
Warning sensitivity
WARNING
The more sensitive the warning settings are,
The system can react incorrectly or not such as the warning time, the more warnings
at all due to the system limits. There is a risk of are displayed. However, there may also be an
accidents or risk of property damage. Observe excess of false warnings.
the information regarding the system limits
and actively intervene, if needed.◀
Collision warning with
Detection range braking function
The system's detection potential is limited.
Thus, a system reaction might not come or The concept
might come late. The system can help prevent accidents. If an
E.g., the following situations may not be de‐ accident cannot be prevented, the system will
tected: help reduce the collision speed.
115
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Safety
The system sounds a warning before an immi‐ too late or incorrectly. There is a risk of an ac‐
nent collision and actuates brakes independ‐ cident. Adjust the driving style to the traffic
ently if needed. conditions. Watch traffic closely and actively
The automatic braking intervention is executed intervene in the respective situations.◀
with limited braking force and for a brief period
WARNING
only.
Due to system limits, individual functions
If the vehicle is equipped with Active Cruise
can malfunction during tow-starting/towing
Control with Stop&Go, the front-end collision
with the Intelligent Safety systems activated,
warning is controlled via the cruise control ra‐
e.g., approach control warning with light brak‐
dar sensor.
ing function. There is a risk of an accident.
The front-end collision warning is available Switch all Intelligent Safety systems off prior to
even if cruise control has been deactivated. tow-starting/towing.◀
With the vehicle approaching another vehicle
intentionally, the collision warning and braking Overview
are delayed in order to avoid false system re‐
actions. Button in the vehicle
General information
The system issues a two-phase warning of a
possible danger of collision with vehicles at
speeds above approx. 3 mph/5 km/h. Time of
warnings may vary with the current driving sit‐
uation.
Detection range
Radar sensor
A radar sensor is located in the front bumper
for detecting vehicles on the road ahead of the
vehicle.
Safety information
WARNING
Indicators and warnings do not relieve
the driver from personal responsibility. Due to
system limits, warnings or reactions of the sys‐ Always keep radar sensor clean and unob‐
tem may not be output or they may be output structed.
116
Online Edition for Part no. 01 40 2 973 324 - VI/16
Safety Controls
1. "Settings"
Braking intervention
The detection of objects can be influenced by
2. "Frontal Coll. Warning"
technical system limitations, e.g. pedestrians
3. Activate the desired time on the Control or stationary objects. Limitations of the detec‐
Display. tion range and functional restrictions are to be
The selected time is stored for the profile cur‐ considered.
rently used. The warning prompts the driver himself/herself
to react. During a warning, the maximum brak‐
Warning with braking function ing force is used. Premise for the brake boos‐
ter is sufficiently quick and hard stepping on
Display the brake pedal. The system can assist with
If a collision with a recognized vehicle is immi‐ automatic braking intervention if there is risk of
nent a warning symbol appears in the instru‐ a collision. The intervention can bring the vehi‐
ment cluster and in the Head-Up Display. cle to a complete stop.
117
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Safety
Functional limitations
The system may not be fully functional in the
following situations:
▷ In heavy fog, rain, sprayed water or snow‐
fall.
▷ In tight curves.
▷ If the driving stability control systems are The detection area in front of the vehicle is div‐
limited or deactivated, for example, DSC ided into two areas:
OFF. ▷ Central area, arrow 1, directly in front of the
▷ If the radar sensor is dirty or obscured. vehicle.
▷ Expanded area, arrow 2, to the right and
Warning sensitivity left.
The more sensitive the warning settings are, A collision is imminent if pedestrians are lo‐
e.g., the warning time, the more warnings are cated within the central area. A warning is is‐
displayed. However, there may also be an ex‐ sued about pedestrians who are located within
cess of false warnings.
118
Online Edition for Part no. 01 40 2 973 324 - VI/16
Safety Controls
Safety information
WARNING
Indicators and warnings do not relieve
the driver from personal responsibility. Due to
system limits, warnings or reactions of the sys‐
tem may not be output or they may be output
too late or incorrectly. There is a risk of an ac‐
cident. Adjust the driving style to the traffic The camera is installed near the interior mirror.
conditions. Watch traffic closely and actively Keep the windshield in front of the interior mir‐
intervene in the respective situations.◀ ror clean and clear.
WARNING
Switching on/off
Due to system limits, individual functions
can malfunction during tow-starting/towing
Switching on automatically
with the Intelligent Safety systems activated,
e.g., approach control warning with light brak‐ The system is automatically active after every
ing function. There is a risk of an accident. driving off.
Switch all Intelligent Safety systems off prior to
tow-starting/towing.◀ Switching off
Press button: the systems are turned
Overview off. The LED goes out.
Press button: the systems are turned on. The
Button in the vehicle LED lights up.
Display
If a collision with a person detected in this way
is imminent, a warning symbol appears on the
instrument cluster and in the Head-up Display.
The red symbol is displayed and a sig‐
nal sounds.
Intelligent Safety button
Intervene immediately by braking or make an
evasive maneuver.
Braking intervention
The warning prompts the driver himself/herself
to react. During a warning, the maximum brak‐
ing force is used. Prerequisite for the brake
booster is sufficiently quick and hard stepping
119
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Safety
on the brake pedal. The system can assist with Functional limitations
some braking intervention if there is a risk of a The system may not be fully functional or may
collision. At low speeds vehicles may thus not be available in the following situations:
come to a complete stop.
▷ In heavy fog, rain, sprayed water or snow‐
Manual transmission: During a braking inter‐ fall.
vention up to a complete stop, the engine may
▷ In tight curves.
be shut down.
▷ If the driving stability control systems are
The braking intervention is executed only if ve‐
deactivated, e.g., DSC OFF.
hicle stability has not been restricted, e.g., by
deactivating the DSC Dynamic Stability Con‐ ▷ If the field of view of the camera or the
trol. windshield are dirty or covered.
The braking intervention can be interrupted by ▷ Up to 10 seconds after the start of the en‐
stepping on the accelerator pedal or by ac‐ gine via the Start/Stop button.
tively moving the steering wheel. ▷ During calibration of the camera immedi‐
Object detection can be restricted. Observe ately after vehicle delivery.
the limitations of the detection range and func‐ ▷ If there are constant blinding effects be‐
tional restrictions. cause of oncoming light, e.g., from the sun
low in the sky.
System limits ▷ When it is dark outside.
Safety information
WARNING Lane departure warning
The system can react incorrectly or not
at all due to the system limits. There is a risk of Concept
accidents or risk of property damage. Observe Starting at a specific speed, this system alerts
the information regarding the system limits you when the vehicle on streets with lane
and actively intervene, if needed.◀ markings is about to leave the lane. This
speed, depending on the country version, is
Detection range between 35 mph/55 km/h and
45 mph/70 km/h.
The detection potential of the camera is lim‐
ited. When switching on the system below this
speed, a message is displayed in the instru‐
Thus, a warning might not be issued or be is‐
ment cluster.
sued late.
The steering wheel begins vibrating gently in
E.g., the following situations may not be de‐
the event of warnings. The time of the warning
tected:
may vary depending on the current driving sit‐
▷ Partially covered pedestrians. uation.
▷ Pedestrians that are not detected as such The system does not provide a warning if the
because of the viewing angle or contour. turn signal is set before leaving the lane.
▷ Pedestrians outside of the detection range.
▷ Pedestrians having a body size less than
32 in/80 cm.
120
Online Edition for Part no. 01 40 2 973 324 - VI/16
Safety Controls
Overview
Issued warning
Button in the vehicle If you leave the lane and if a lane marking has
been detected, the steering wheel begins vi‐
brating.
If the turn signal is set before changing the
lane, a warning is not issued.
End of warning
The warning is canceled in the following situa‐
tions:
▷ Automatically after approx. 3 seconds.
Lane departure warning ▷ When returning to your own lane.
▷ When braking hard.
System limits
Safety information
WARNING
The system can react incorrectly or not
at all due to the system limits. There is a risk of
accidents or risk of property damage. Observe
the information regarding the system limits
and actively intervene, if needed.◀
The camera is installed near the interior mirror.
Keep the windshield in front of the interior mir‐
ror clean and clear. Functional limitations
The system may not be fully functional in the
following situations:
Switching on/off
▷ In heavy fog, rain or snowfall.
Press button.
121
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Safety
▷ In the event of missing, worn, poorly visi‐ The lamp in the exterior mirror housing flashes
ble, merging, diverging, or multiple lane and the steering wheel vibrates.
markings such as in construction areas.
▷ When lane markings are covered in snow, Safety information
ice, dirt or water. WARNING
▷ In tight curves or on narrow lanes. The system does not release from the
▷ When the lane markings are covered by personal responsibility to correctly assess visi‐
objects. bility and traffic situation. There is a risk of an
▷ When driving very close to the vehicle in accident. Adjust the driving style to the traffic
front of you. conditions. Watch traffic closely and actively
intervene in the respective situations.◀
▷ When driving toward bright lights.
▷ When the windshield in front of the interior
Overview
mirror is fogged over, dirty or covered with
stickers, etc.
Button in the vehicle
▷ During calibration of the camera immedi‐
ately after vehicle delivery.
Radar sensors
122
Online Edition for Part no. 01 40 2 973 324 - VI/16
Safety Controls
▷ On: the LED lights up. the information regarding the system limits
▷ Off: the LED goes out. and actively intervene, if needed.◀
Safety information
WARNING
The system can react incorrectly or not
at all due to the system limits. There is a risk of
accidents or risk of property damage. Observe
123
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Safety
Break recommendation
▷ During normal brake application, the outer
If the driver becomes less alert or fatigued, a
brake lights light up.
message is displayed in the Control Display
▷ During heavy brake application, the inner with the recommendation to take a break.
brake lights additionally light up.
A recommendation to take a break is displayed
only once during an uninterrupted trip.
After a break, another recommendation to take
Attentiveness assistant a break cannot be displayed until after approxi‐
mately 45 minutes.
Concept
The system can detect decreasing alertness or System limits
fatigue of the driver during long, monotonous The function may be limited in the following
trips, e.g., on highways. In this situation, it is situations, e.g., and will either output an incor‐
recommended that the driver takes a break. rect warning or no warning at all:
▷ When the clock is set incorrectly.
Safety information
▷ When the vehicle speed is mainly below
WARNING about 43 mph/70 km/h.
The system does not release from the ▷ With a sporty driving style, such as during
personal responsibility to correctly assess rapid acceleration or when cornering fast.
one's physical state. An increasing lack of
alertness or fatigue may not be detected or not ▷ In active driving situations, such as when
be detected in time. There is a risk of an acci‐ changing lanes frequently.
dent. Make sure that the driver is rested and ▷ When the road surface is poor.
alert. Adjust the driving style to the traffic con‐ ▷ In the event of strong side winds.
ditions.◀
The system is reset approx. 45 minutes after
parking the vehicle, e.g., in the case of a break
during longer trips on highways.
124
Online Edition for Part no. 01 40 2 973 324 - VI/16
Driving stability control systems Controls
125
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Driving stability control systems
126
Online Edition for Part no. 01 40 2 973 324 - VI/16
Driving stability control systems Controls
Programs
The system offers several different programs.
The programs can be selected via Driving Dy‐
namics Control.
SPORT
Consistently sporty control of the shock ab‐
sorbers for greater driving agility.
SPORT+
Consistently sporty control of the shock ab‐
sorbers for greater driving agility when driving
with limited driving stabilization.
COMFORT/ECO PRO
Balanced control of the vehicle.
127
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Driving stability control systems
128
Online Edition for Part no. 01 40 2 973 324 - VI/16
Driving stability control systems Controls
ECO PRO
ECO PRO, refer to page 184, provides consis‐
tent tuning to minimize fuel consumption for Display on the Control Display
maximum range with maximum driving stabili‐ Program changes can be displayed on the
zation. Control Display.
Comfort functions and the engine controller 1. "Settings"
are adjusted.
2. "Control display"
The program can be configured to individual
3. "Driving mode info"
specifications.
▷ SPORT, refer to page 128. For vehicles with respective equipment ver‐
sions, the possible holding duration amounts
▷ ECO PRO, refer to page 185. to 2 minutes.
129
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Driving stability control systems
Servotronic
Concept
The Servotronic varies the steering force re‐
quired to turn the wheels in accordance with
the vehicle speed. At low speeds, the steering
force is strongly supported, i. e. during steer‐
ing, low force is required. As the speed in‐
creases, the assistance of the steering force is
reduced.
Furthermore, the steering force adapts accord‐
ing to the driving program, so that a direct,
sporty feel and/or comfortable steering is con‐
veyed.
130
Online Edition for Part no. 01 40 2 973 324 - VI/16
Driving comfort Controls
Driving comfort
Vehicle features and options Safety information
WARNING
Active Cruise Control with An unsecured vehicle can begin to move
and possibly roll away. There is a risk of an ac‐
Stop&Go function, ACC cident. Before exiting, secure the vehicle
against rolling.
Concept
In order to ensure that the vehicle is secured
Using this system, a desired speed and a dis‐
against rolling away, observe the following:
tance to a vehicle ahead can be adjusted using
the buttons on the steering wheel. ▷ Set the parking brake.
The system maintains the desired speed on ▷ On uphill grades or on a downhill slope,
clear roads. For this purpose, the vehicle ac‐ turn the front wheels in the direction of the
celerates or brakes automatically. curb.
If a vehicle is driving ahead of you, the system ▷ On uphill grades or on a downhill slope,
adjusts the speed of your vehicle within the also secure the vehicle, e.g., with a wheel
given system limits so that the set distance to chock.◀
the vehicle ahead is maintained. WARNING
The distance can be adjusted in several steps. The desired speed can be incorrectly ad‐
For safety reasons, it depends on the respec‐ justed or called up by mistake. There is a risk
tive speed. of an accident. Adjust the desired speed to the
If the vehicle ahead of you brakes to a halt, and traffic conditions. Watch traffic closely and ac‐
then proceeds to drive again within a brief pe‐ tively intervene in the respective situations.◀
riod, the system is able to detect this within the
given system limits. WARNING
Risk of accident due to too high speed
General information differences to other vehicles, e.g., in the fol‐
Depending on the driving settings, the features lowing situations:
of the cruise control can change in certain ▷ When fast approaching a slowly moving
areas. vehicle.
▷ Suddenly swerving vehicle onto the own
lane.
131
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Driving comfort
Interrupting manually
Press button on the steering wheel.
132
Online Edition for Part no. 01 40 2 973 324 - VI/16
Driving comfort Controls
▷ When the driver applies the brakes. The speed can also be stored by
▷ When selector lever position D is disen‐ pressing a button.
gaged. Press button.
▷ When DTC is activated or DSC is deacti‐
vated. Changing the speed
▷ When DSC is actively controlling stability.
▷ When SPORT+ is activated with Driving
Dynamics Control.
▷ If the safety belt and the driver's door are
opened while the vehicle is standing still.
▷ If the system has not detected objects for
an extended period, for example, on a road
with very little traffic without curb or
shoulder markings.
▷ If the detection range of the radar is dis‐ Press the rocker switch up or down repeatedly
rupted, for example, by dirt or heavy fog. until the desired speed is set.
▷ After a longer stationary period when the If active, the displayed speed is stored and the
vehicle has been braked to a stop by the vehicle reaches the stored speed when the
system. road is clear.
▷ Each time the rocker switch is pressed to
Setting the speed the point of resistance, the desired speed
increases or decreases by approx.
Maintaining/storing the speed 1 mph/1 km/h.
▷ Each time the rocker switch is pressed
past the point of resistance, the desired
speed increases or decreases by a maxi‐
mum of 5 mph/10 km/h.
Hold the rocker switch in position to repeat the
action.
Adjusting distance
Press the rocker switch while the system is in‐ Safety information
terrupted.
WARNING
When the system is switched on, the current The system does not release from the
speed is maintained and stored as the desired personal responsibility. Due to the system lim‐
speed. its, braking can be late. There is a risk of acci‐
The stored speed is displayed in the speedom‐ dents or risk of property damage. Be aware to
eter and briefly in the instrument cluster, refer the traffic situation at all times. Adjust the dis‐
to page 134. tance to the traffic and weather conditions and
maintain the prescribed safety distance, possi‐
DSC will be switched on, if needed.
bly by braking.◀
133
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Driving comfort
Reduce distance ▷ The marking does not light up: the system
is switched off.
Press button repeatedly until the de‐
sired distance is set.
Brief status display
Instrument cluster will display selected dis‐
tance, refer to page 134. Selected desired speed.
Increase distance
If no speed is indicated, it is possible that the
Press button repeatedly until the de‐ conditions necessary for operation are not cur‐
sired distance is set. rently fulfilled.
134
Online Edition for Part no. 01 40 2 973 324 - VI/16
Driving comfort Controls
135
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Driving comfort
Unexpected lane change the bend of the curve. If the system deceler‐
ates you may compensate it by briefly acceler‐
ating.
After releasing the accelerator pedal the sys‐
tem is reactivated and controls speed inde‐
pendently.
Driving away
In some situations, the vehicle cannot drive off
automatically; for example:
If a vehicle ahead of you unexpectedly moves
▷ On steep inclines.
into another lane from behind a stopped vehi‐
cle, you yourself must react, as the system ▷ From bumps in the road.
does not react to stopped vehicles. In these cases, step on the accelerator pedal.
Weather
Cornering
In the event of unfavorable weather and light
conditions, e.g., if there is rain, snowfall, slush,
fog or glare, this may result in poorer recogni‐
tion of vehicles as well as short-term interrup‐
tions for vehicles that are already detected.
Drive attentively, and react to the current traffic
situation. If necessary, intervene actively, e.g.,
by braking, steering or evading.
Engine power
If the desired speed is too high for a curve, the The desired speed is also maintained downhill,
speed is reduced slightly, although curves can‐ but may not be maintained on uphill grades if
not be anticipated in advance. Therefore, drive engine power is insufficient.
into a curve at an appropriate speed.
In tight curves the system offers only restricted Malfunction
detection where a vehicle ahead of you might The system cannot be activated if the radar
be detected late or not at all. sensor is not aligned correctly. This may be
caused by damage incurred, e.g., during park‐
ing.
A Check Control message is displayed if the
system fails.
Cruise control
Concept
When you approach a curve the system may Using this system, a desired speed can be ad‐
briefly report vehicles in the next lane due to justed using the buttons on the steering wheel.
136
Online Edition for Part no. 01 40 2 973 324 - VI/16
Driving comfort Controls
Interrupting automatically
The system is automatically interrupted in the
following situations:
137
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Driving comfort
138
Online Edition for Part no. 01 40 2 973 324 - VI/16
Driving comfort Controls
139
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Driving comfort
140
Online Edition for Part no. 01 40 2 973 324 - VI/16
Driving comfort Controls
The rearview camera image is displayed when A display appears as soon as Park Distance
the reverse gear is engaged when pressing the Control (PDC) is activated.
park assistance button. The range of the sensors is represented in the
colors green, yellow and red.
WARNING
When the image of the rearview camera is dis‐
played, the switch can be made to PDC:
Signal tones
"Rear view camera"
When approaching an object, an intermittent
sound indicates the position of the object. E.g.,
if an object is detected to the left rear of the
With appropriate protection: side
vehicle, a signal tone sounds from the left rear
protection
speaker.
Concept
The shorter the distance to the object, the
The system warns you about obstacles at the
shorter the intervals.
side of the vehicle by means of acoustic sig‐
If the distance to a detected object is less than nals or by displaying an appropriate warning on
approx. 10 inches/25 cm, a continuous tone is the Control Display.
sounded.
With front PDC: if objects are located both in General information
front of and behind the vehicle, an alternating The system uses the ultrasound sensors of
continuous signal is sounded. PDC and parking assistant.
The signal tone is switched off, when selector
lever position P is engaged on vehicles with Display
Steptronic transmission.
Volume
The ratio of the PDC signal tone volume to the
entertainment volume can be adjusted.
Visual warning
Limits of side protection
The approach of the vehicle to an object can
be shown on the Control Display. Objects that The system only detects standing obstacles
are farther away are already displayed on the that entered the area of the sensors previously
Control Display before a signal sounds. when driving by.
141
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Driving comfort
The system detects if your vehicle is ap‐ ▷ For objects with porous surfaces.
proaching the standing obstacle due to its own ▷ If cargo protrudes.
motion or steering angle.
▷ Low objects already displayed, e.g., curbs,
The system does not detect whether an obsta‐ can move into the blind area of the sensors
cle moves. If the vehicle is stationary, the before or after a continuous tone sounds.
markings are shown in gray after some time.
The area next to the vehicle must be newly False warnings
captured.
The system may issue a warning under the fol‐
lowing conditions even though there is no ob‐
System limits
stacle within the detection range:
Safety information ▷ In heavy rain.
▷ With elevated, protruding objects such as PDC has failed. Have the system checked.
ledges or cargo.
▷ With objects with corners and sharp edges.
▷ With objects with a fine surface structure
such as fences.
142
Online Edition for Part no. 01 40 2 973 324 - VI/16
Driving comfort Controls
Concept
Camera
Surround View comprises various camera as‐
sistance systems that help the driver when
parking, maneuvering, and at complex exits
and intersections.
▷ Rearview camera, refer to page 143
▷ Side View, refer to page 145.
▷ Top View, refer to page 146.
143
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Driving comfort
Switching the view via iDrive Pathway lines depend on the current steering
With PDC activated or Top View switched on: angle and are continuously adjusted to the
steering wheel movements.
"Rear view camera"
The rearview camera image is displayed.
Turning radius lines
Display on the Control Display
Functional requirement
▷ The rearview camera is switched on.
▷ The tailgate is fully closed.
▷ Keep the recording range of the camera
clear. Protruding cargo or carrier systems
and trailers that are not connected to a
trailer power socket can lead to malfunc‐
tions. Turning radius lines can only be superimposed
on the rearview camera image together with
pathway lines.
Activating assistance functions
More than one assistance function can be ac‐ Turning radius lines show the course of the
tive at the same time. smallest possible turning radius on a level
road.
▷ Parking aid lines
Only one turning radius line is displayed after
"Parking aid lines" the steering wheel is turned past a certain an‐
Lanes and turning radius are indicated. gle.
▷ Obstacle marking
"Obstacle marking" Obstacle marking
Spatially-shaped markings are displayed.
Pathway lines
144
Online Edition for Part no. 01 40 2 973 324 - VI/16
Driving comfort Controls
145
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Driving comfort
Overview Display
The traffic area to the left and right is displayed
Button in the vehicle on the Control Display.
Cameras
Brightness
With the Side View switched on:
1. "Brightness"
2. Turn the Controller until the desired set‐
ting is reached, and press the Controller.
Contrast
With the Side View switched on:
Switching on/off
Top View
Switching on/off manually
Press button. The concept
Top View provides assistance in parking and
maneuvering. The area around the doors and
Automatic deactivation during forward the road area around the vehicle are shown on
travel the Control Display for this purpose.
The system switches off when a certain driving
distance or speed is exceeded.
Switch the system back on, if needed.
146
Online Edition for Part no. 01 40 2 973 324 - VI/16
Driving comfort Controls
Safety information
Cameras at the bottom in the mirror housings.
WARNING
The system does not relieve from the
personal responsibility to correctly assess the
traffic situation. There is a risk of an accident.
Adjust the driving style to the traffic condi‐
tions. Watch traffic and vehicle surroundings
closely and actively intervene in the respective
situations.◀
Overview
Rearview camera
Button in the vehicle
The image quality may be impaired by dirt. If
required, clean the camera lenses.
Switching on/off
Switching on automatically
The system is switched on automatically if se‐
lector lever position R is engaged when the en‐
gine is running.
The rearview camera image is displayed. To
Park assistance button
switch to the Top View:
"Rear view camera"
147
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Driving comfort
System limits
Top View cannot be used in the following sit‐
uations:
▷ With a door open.
▷ With the tailgate open.
The display appears as soon as Top View is
activated. ▷ With an exterior mirror folded in.
▷ In poor light.
When the image of the rearview camera is dis‐
A Check Control message is displayed in some
played, it is possible to switch to top view:
of these situations.
"Rear view camera"
Brightness
With Top View switched on:
1. Select the symbol.
2. Turn the controller until the desired setting
is reached, and press the controller.
148
Online Edition for Part no. 01 40 2 973 324 - VI/16
Driving comfort Controls
NOTE
The parking assistant can steer the vehi‐
cle over or onto curbs. There is a risk of prop‐
erty damage. Watch traffic closely and actively
intervene in the respective situations.◀
Overview
General information
Parking assistant handling is divided into three
steps:
▷ Switching on and activating. Park assistance button
▷ Parking space search.
▷ Parking.
Ultrasound sensors
System status and instructions on required ac‐
tions are displayed on the Control Display.
Ultrasound sensors measure parking spaces
on both sides of the vehicle.
The parking assistant calculates the best pos‐
sible parking line and takes control of steering
during the parking procedure.
The parking assistant uses the sensors of PDC
Park Distance Control. Also observe the safety
information for PDC Park Distance Control. The four ultrasound sensors for measuring
parking spaces are located in the front and rear
Safety information on the side of the vehicle.
WARNING
The system does not release from the Functional requirements
personal responsibility to correctly assess the
traffic situation. Based on the limits of the sys‐ Ultrasound sensors
tem, it cannot independently react to all traffic To ensure full functionality:
situations. There is a risk of an accident. Adjust
149
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Driving comfort
▷ Do not cover sensors, e.g., with stickers. The LED lights up.
▷ Keep sensors clean and unobstructed.
The current status of the parking space search
is indicated on the Control Display.
For measuring parking spaces
Parking assistant is activated automatically.
▷ Maximum speed while driving forward ap‐
prox. 22 mph/35 km/h.
Switching on with reverse gear
▷ Maximum distance to row of parked vehi‐
Shift into reverse.
cles: 5 ft/1.5 m.
The current status of the parking space search
Suitable parking space is indicated on the Control Display.
For parking
▷ Doors and tailgate are closed.
▷ The parking brake is released.
▷ Symbol P, see arrow, on the vehicle depic‐
▷ When parking in parking spaces on the tion. Parking assistant is activated and
driver's side, the corresponding turn signal search for parking space active.
must be set where applicable.
▷ Control Display shows suitable parking
spaces at the edge of the road next to the
Switching on and activating
vehicle symbol. When the parking assistant
is active, suitable parking spaces are high‐
Switching on with the button
lighted.
Press park assistance button.
150
Online Edition for Part no. 01 40 2 973 324 - VI/16
Driving comfort Controls
151
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Driving comfort
152
Online Edition for Part no. 01 40 2 973 324 - VI/16
Climate control Controls
Climate control
Vehicle features and options to the selected options or country versions.
This also applies to safety-related functions
This chapter describes all standard, country- and systems. When using these functions and
specific and optional features offered with the systems, the applicable country provisions
series. It also describes features that are not must be observed.
necessarily available in your vehicle, e. g., due
Switching on
Press any button except
153
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Climate control
AUTO program
Press button.
Air flow, air distribution and tempera‐
ture are controlled automatically.
154
Online Edition for Part no. 01 40 2 973 324 - VI/16
Climate control Controls
Microfilter
▷ Windows.
In external and recirculated-air mode the mi‐
▷ Upper body region.
crofilter filters dust and pollen from the air.
▷ Windows, upper body region, and floor
This filter should be replaced during scheduled
area.
maintenance, refer to page 225, of your vehi‐
▷ Floor area. cle.
155
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Climate control
156
Online Edition for Part no. 01 40 2 973 324 - VI/16
Climate control Controls
side windows, upper body, and into the floor button to utilize the condensation sensor.
area. Make sure that air can flow to the windshield.
The cooling function, refer to page 156, is
switched on automatically with the AUTO pro‐ Air flow, manual
gram. To manually adjust air flow turn off AUTO pro‐
At the same time, a condensation sensor con‐ gram first.
trols the program so as to prevent window Press the left or right side of the but‐
condensation as much as possible. ton: decrease or increase air flow.
Intensity of the AUTO program The selected air flow is shown on the display of
With the AUTO program activated, the auto‐ the automatic climate control.
matic intensity control can be changed. The air flow of the automatic climate control
may be reduced automatically to save battery
Press the left or right side of the but‐
power.
ton: decrease or increase intensity.
157
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Climate control
AUTO button to utilize the condensation sen‐ Direct vent in your direction when vehicle's
sor. interior is too hot.
▷ Draft-free ventilation:
Rear window defroster
Adjust the vent to let the air flow past you.
Press button.
The rear window defroster switches Ventilation in the rear
off automatically after a certain period of time.
Microfilter/activated-charcoal filter
In external and recirculated-air mode the mi‐
crofilter/activated charcoal filter filters dust,
pollen, and gaseous pollutants out of the air.
This filter should be replaced during vehicle
maintenance, refer to page 225.
158
Online Edition for Part no. 01 40 2 973 324 - VI/16
Climate control Controls
1. "Settings"
2. "Climate"
3. "Timer 1:" or "Timer 2:"
4. Set the desired time.
159
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Interior equipment
Interior equipment
Vehicle features and options the safety instructions of the hand-held trans‐
mitter.◀
This chapter describes all standard, country-
specific and optional features offered with the
Compatibility
series. It also describes features that are not
necessarily available in your vehicle, e. g., due If this symbol is printed on the packag‐
to the selected options or country versions. ing or in the owner's manual of the sys‐
This also applies to safety-related functions tem to be controlled, the system is
and systems. When using these functions and generally compatible with the Universal
systems, the applicable country provisions Integrated Remote Control.
must be observed. If you have any questions, please contact:
▷ A dealer’s service center or another quali‐
fied service center or repair shop.
Universal Integrated Remote
▷ www.homelink.com on the Internet.
Control
HomeLink is a registered trademark of Gentex
Concept Corporation.
The Universal Integrated Remote Control can
operate up to 3 functions of remote-controlled Control elements on the interior mirror
systems such as garage door drives or lighting
systems. The Universal Integrated Remote
Control replaces up to 3 different hand-held
transmitters. To operate the remote control,
the buttons on the interior mirror must be pro‐
grammed with the desired functions. The
hand-held transmitter for the particular system
is required in order to program the remote con‐
trol.
Before selling the vehicle, delete the stored
▷ LED, arrow 1.
functions for the sake of security.
▷ Buttons, arrow 2.
Safety information ▷ The hand-held transmitter, arrow 3, is re‐
quired for programming.
WARNING
Body parts can be jammed when operat‐
ing remote-controlled systems, e.g., the ga‐ Programming
rage door, using the integrated universal re‐
mote control. There is a risk of injury or risk of General information
property damage. Make sure that the area of 1. Switch on the ignition.
movement of the respective system is clear 2. Initial setup:
during programming and operation. Also follow
Press and hold the left and right button on
the interior mirror simultaneously for ap‐
160
Online Edition for Part no. 01 40 2 973 324 - VI/16
Interior equipment Controls
proximately 20 seconds until the LED on flashing rapidly and then stays lit constantly for
the interior mirror flashes. This erases all 2 seconds, the system features a rolling code
programming of the buttons on the interior radio system. Flashing and continuous illumi‐
mirror. nation of the LED will repeat for approximately
3. Hold the hand-held transmitter for the sys‐ 20 seconds.
tem to be controlled approx. 1 to 3 in‐ For systems with a rolling code radio system,
ches/2.5 to 8 cm away from the buttons of the universal remote control and the system
the interior mirror. The required distance also have to be synchronized.
depends on the hand-held transmitter. Please read the owner's manual to find out
4. Simultaneously press and hold the button how to synchronize the system.
of the desired function on the hand-held Synchronizing is easier with the aid of a sec‐
transmitter and the button to be program‐ ond person.
med on the interior mirror. The LED on the
Synchronizing the universal remote control
interior mirror will begin flashing slowly.
with the system:
5. Release both buttons as soon as the LED
flashes more rapidly. The LED flashing 1. Park the vehicle within range of the re‐
faster indicates that the button on the inte‐ mote-controlled system.
rior mirror has been programmed. 2. Program the relevant button on the interior
If the LED does not flash faster after at mirror as described.
least 60 seconds, change the distance be‐ 3. Locate and press the synchronizing button
tween the interior mirror and the hand-held on the system being programmed. You
transmitter and repeat the step. Several have approx. 30 seconds for the next step.
more attempts at different distances may 4. Hold down the programmed button on the
be necessary. Wait at least 15 seconds be‐ interior mirror for approximately 3 seconds
tween attempts. and then release it. If necessary, repeat this
Canada: if programming with the hand- step up to three times in order to finish
held transmitter was interrupted, hold synchronization. Once synchronization is
down the interior mirror button and repeat‐ complete, the programmed function will be
edly press and release the hand-held carried out.
transmitter button for 2 seconds.
6. To program other functions on other but‐ Reprogramming individual buttons
tons, repeat steps 3 to 5. 1. Switch on the ignition.
The systems can be controlled using the inte‐ 2. Press and hold the interior mirror button to
rior mirror buttons. be programmed.
3. As soon as the interior mirror LED starts
Special feature of the rolling code flashing slowly, hold the hand-held trans‐
wireless system mitter for the system to be controlled ap‐
If you are unable to operate the system after prox. 1 to 3 inches/2.5 to 8 cm away from
repeated programming, please check if the the buttons of the interior mirror. The re‐
system to be controlled features a rolling code quired distance depends on the hand-held
radio system. transmitter.
Read the system's owner's manual, or press
the programmed button on the interior mirror
longer. If the LED on the interior mirror starts
161
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Interior equipment
4. Likewise, press and hold the button of the idly. All stored functions will be deleted. The
desired function on the hand-held trans‐ functions cannot be deleted individually.
mitter.
5. Release both buttons as soon as the inte‐
rior mirror LED flashes more rapidly. The Digital compass
LED flashing faster indicates that the but‐
ton on the interior mirror has been pro‐ Overview
grammed. The system can then be con‐
trolled by the button on the interior mirror.
If the LED does not flash faster after at
least 60 seconds, change the distance and
repeat the step. Several more attempts at
different distances may be necessary. Wait
at least 15 seconds between attempts.
Canada: if programming with the hand-
held transmitter was interrupted, hold
down the interior mirror button and repeat‐ 1 Control button
edly press and release the hand-held
2 Mirror display
transmitter button for 2 seconds.
162
Online Edition for Part no. 01 40 2 973 324 - VI/16
Interior equipment Controls
Procedure Procedure
1. Press and hold the control button for ap‐ 1. Make sure that there are no large metallic
prox. 3 to 4 seconds. The number of the objects or overhead power lines near the
set compass zone appears in the mirror. vehicle and that there is sufficient room to
2. To change the zone setting, press the con‐ drive around in a circle.
trol button quickly and repeatedly until the 2. Set the currently applicable compass zone.
number of the compass zone that corre‐ 3. Press and hold the control button for ap‐
sponds with your location appears in the prox. 6 to 7 seconds so that "C" appears
mirror. on the display. Next, drive in a complete
The set zone is stored automatically. The com‐ circle at least once at a speed of no more
pass is ready for use again after approximately than 4 mph/7 km/h. If calibration is suc‐
10 seconds. cessful, the "C" is replaced by the points of
the compass.
Calibrating the digital compass
The digital compass must be calibrated in the Left/right-hand steering
event of the following: The digital compass is already set for right or
▷ The wrong compass point is displayed. left-hand steering at the factory.
▷ The point of the compass displayed does
Setting the language
not change despite changing the direction
of travel. Press and hold the control button for approx.
12 to 13 seconds. Briefly press the control
▷ Not all points of the compass are dis‐
button again to switch between English "E"
played.
and German "O".
163
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Interior equipment
Lighter
Sun visor WARNING
Glare shield Contact with hot heating elements or the
hot socket of the cigarette lighter can cause
Fold the sun visor down or up.
burns. Flammable materials can ignite if the
cigarette lighter falls down or is held against
Vanity mirror
the respective objects. There is a risk of fire
A vanity mirror is located in the sun visor be‐ and injuries. Hold the cigarette lighter by its
hind a cover. When the cover is opened, the handle. Make sure that children do not use the
mirror lighting switches on. cigarette lighter and do not burn themselves,
e.g., by carrying the remote control with you
when exiting the vehicle.◀
Ashtray/cigarette lighter
NOTE
Ashtray If metal objects fall into the socket, they
can cause a short circuit. There is a risk of
Opening property damage. Replace the cigarette lighter
or socket cover again after using the socket.◀
164
Online Edition for Part no. 01 40 2 973 324 - VI/16
Interior equipment Controls
Sockets
General information
The lighter socket can be used as a socket for
Slide the cover forward.
electrical equipment while the engine is run‐
ning or when the ignition is switched on.
The total load of all sockets must not exceed
140 watts at 12 volts.
Do not damage the socket by using non-com‐
patible connectors.
Safety information
NOTE
Battery chargers for the vehicle battery
Remove the socket or cigarette lighter cover.
can work with high voltages and currents,
which means that the 12 volt on-board net‐
work can be overloaded or damaged. There is Rear center console
a risk of property damage. Only connect bat‐
tery chargers for the vehicle battery to the
starting aid terminals in the engine compart‐
ment.◀
NOTE
If metal objects fall into the socket, they
can cause a short circuit. There is a risk of
property damage. Replace the cigarette lighter
or socket cover again after using the socket.◀
Remove the cover.
165
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Interior equipment
General information
Depending on the equipment, the USB inter‐
face is located in the center console or in the
glove compartment.
166
Online Edition for Part no. 01 40 2 973 324 - VI/16
Interior equipment Controls
▷ Protect the USB storage device against The rear seat backrest is divided at a ratio of
mechanical damage. 40–20–40.
▷ Due to the large number of USB media The sides can be folded down separately or to‐
available on the market, it cannot be guar‐ gether.
anteed that every device is operable on the
vehicle. Safety information
▷ Do not expose USB media to extreme envi‐ WARNING
ronmental conditions, such as very high Danger of jamming with folding down the
temperatures; refer to the device owner's backrests. There is a risk of injury or risk of
manual. property damage. Make sure that the area of
▷ Due to the many different compression movement of the rear backrest and the of the
techniques, proper playback of the media head restraint is clear prior to folding down.◀
stored on the USB storage device cannot
WARNING
be guaranteed in all cases.
The stability of the child restraint system
▷ A connected USB storage device will be
is limited or compromised with incorrect seat
supplied with charging current via the USB
adjustment or improper installation of the child
interface if the device supports this.
seat. There is a risk of injuries or danger to life.
▷ To ensure proper transmission of the Make sure that the child restraint system fits
stored data, do not charge a USB storage securely against the backrest. If possible, ad‐
device via the onboard socket, when it is just the backrest tilt for all affected backrests
connected to the USB interface. and correctly adjust the seats. Make sure that
▷ Depending on how the USB storage device seats and backrests are securely engaged. If
should be used, settings may be required possible, adjust the height of the head re‐
on the USB storage device, refer to the de‐ straints or remove them.◀
vice owner's manual.
NOTE
Non- compatible USB media:
Vehicle parts can be damaged when
▷ USB hard drives.
folding down the rear backrest. There is a risk
▷ USB hubs. of property damage. Make sure that the area of
▷ USB memory card readers with multiple in‐ movement of the rear backrest including head
serts. restraint is clear when folding down.◀
▷ HFS-formatted USB media.
▷ MTP devices.
▷ Devices such as fans or lights.
167
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Interior equipment
Opening Closing
1. Unlock the belt lock of the center safety WARNING
belt in the rear using the latch plate of an‐
With an unlocked backrest, an unsecured
other safety belt.
load can be thrown into the vehicle's interior,
2. Insert the latch plate at the end of the belt e.g., in case of an accident, braking or evasive
into the specially designated fixture on the maneuver. There is a risk of injury. Make sure
rear window shelf. that the backrest engages into the locking af‐
ter folding it back.◀
1. Return the rear seat backrest to the upright
seating position and engage it.
2. Release the belt tongue from the fixture on
the rear window shelf.
3. Insert the belt tongue in the belt lock of the
center safety belt. Make sure you hear the
latch plate engage.
3. Push the corresponding head restraint To secure cargo, refer to page 181, with nets
down as far as it will go. or draw straps, the cargo area is fitted with
lashing eyes.
4. Pull the corresponding lever in the cargo
area to release the rear seat backrest.
Fold down the middle section
1. Fold in the middle head restraint.
2. Reach into the recess and pull the middle
section forward.
168
Online Edition for Part no. 01 40 2 973 324 - VI/16
Storage compartments Controls
Storage compartments
Vehicle features and options ▷ Storage compartment in the front center
armrest, refer to page 170.
This chapter describes all standard, country-
▷ Compartments in the doors, refer to
specific and optional features offered with the
page 170.
series. It also describes features that are not
necessarily available in your vehicle, e. g., due ▷ Nets on the backrests of the front seats.
to the selected options or country versions. ▷ Storage compartment in the rear center
This also applies to safety-related functions console, refer to page 171.
and systems. When using these functions and
systems, the applicable country provisions
must be observed. Glove compartment
Front passenger side
Safety information
Safety information
WARNING
Loose objects or devices with a cable WARNING
connection to the vehicle, e.g., mobile phones, Folded open, the glove compartment
can be thrown into the vehicle's interior while protrudes in the vehicle's interior. Objects in
driving, e.g., in the event of an accident or dur‐ the glove compartment can be thrown into the
ing braking and evasive maneuvers. There is a vehicle's interior while driving, e.g., in the event
risk of injury. Secure loose objects or devices of an accident or during braking and evasive
with a cable connection to the vehicle in the maneuvers. There is a risk of injury. Always
vehicle's interior.◀ close the glove compartment immediately after
using it.◀
NOTE
Anti-slip pads such as anti-slip mats can Opening
damage the dashboard. There is a risk of prop‐
erty damage. Do not use anti-slip pads.◀
Storage compartments
The following storage compartments are avail‐
able in the vehicle interior:
▷ Glove compartment on the front passenger
side, refer to page 169.
Pull the handle.
▷ Glove compartment on the driver's side,
refer to page 170. The light in the glove compartment switches
on.
▷ Front storage compartment, in front of the
cup holders, refer to page 170.
169
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Storage compartments
Locking
The glove compartment can be locked with an
integrated key to separately secure the tail‐
gate, refer to page 42, e.g.
This prevents access to the glove compart‐
ment and to the cargo area.
After the glove compartment is locked, the re‐
mote control can be handed over, such as at a There is a storage compartment in the center
hotel, without the integrated key. console.
Driver's side
Safety information
Compartments in the doors
WARNING WARNING
Folded open, the glove compartment Breakable objects, e.g., glass bottles, can
protrudes in the vehicle's interior. Objects in break in the event of an accident. Broken glass
the glove compartment can be thrown into the can be scattered in the vehicle's interior. There
vehicle's interior while driving, e.g., in the event is a risk of injury. Do not stow any breakable
of an accident or during braking and evasive objects in the vehicle's interior.◀
maneuvers. There is a risk of injury. Always
close the glove compartment immediately after
using it.◀ Center armrest
Opening Front
A storage compartment is located in the center
armrest between the front seats.
Opening
Closing
Fold cover closed. Fold the center armrest up.
170
Online Edition for Part no. 01 40 2 973 324 - VI/16
Storage compartments Controls
Repositioning Front
Center armrest can be pushed forwards or
backwards. It engages in the end positions.
Cup holders
Safety information
WARNING
Unsuitable containers in the cup holder
and hot beverages can damage the cup holder
and increase the risk of injury in the event of an
accident. There is a risk of injury or risk of Pull the center armrest forward at the strap.
property damage. Use light-weight, unbreaka‐ To open: press the button.
ble, and sealable containers. Do not transport
To close: push both covers back in, one after
hot beverages. Do not force objects into the
the other.
cup holder.◀
NOTE
With an open cup holder, the center arm‐
rest cannot be folded back up. There is a risk
of property damage. Press back the covers be‐
fore the center armrest is folded up.◀
171
Online Edition for Part no. 01 40 2 973 324 - VI/16
Controls Storage compartments
WARNING
Improper use of the clothes hooks can
lead to a risk of objects flying about during
braking and evasive maneuvers. There is a risk
of injury and risk of property damage. Only
hang lightweight objects, e.g., clothing articles,
from the clothes hooks.◀ A multi-function hook is located on each side
of the cargo area.
General information
The clothes hooks are located in the grab han‐ Lashing eyes in the cargo area
dles in the rear. To secure the cargo, refer to page 181, there
are four lashing eyes in the cargo area.
Multi-function hook
Information
WARNING
Improper use of the multi-function hooks
can lead to a risk of objects flying about during Raise the cargo floor panel, arrow 1, and latch
braking and evasive maneuvers. There is a risk at top, if needed, arrow 2.
172
Online Edition for Part no. 01 40 2 973 324 - VI/16
Storage compartments Controls
173
Online Edition for Part no. 01 40 2 973 324 - VI/16
Online Edition for Part no. 01 40 2 973 324 - VI/16
Driving tips
This chapter provides you with information
useful in dealing with specific driving and
operating modes.
176
Online Edition for Part no. 01 40 2 973 324 - VI/16
Things to remember when driving Driving tips
177
Online Edition for Part no. 01 40 2 973 324 - VI/16
Driving tips Things to remember when driving
▷ Drive through water only if it is not deeper The heat generated during braking dries brake
than maximum 9.8 in/25 cm. discs and brake pads and protects them
▷ Drive through water no faster than walking against corrosion.
speed, up to 3 mph/5 km/h. In this way braking efficiency will be available
when you need it.
Braking safely
Your vehicle is equipped with ABS as a stand‐ Hills
ard feature. WARNING
Perform an emergency stop in situations that Light but consistent brake pressure can
require such. lead to high temperatures, brakes wearing out
Steering is still responsive. You can still avoid and possibly even brake failure. There is a risk
any obstacles with a minimum of steering ef‐ of an accident. Avoid placing excessive stress
fort. on the brake system.◀
Pulsation of the brake pedal and sounds from WARNING
the hydraulic circuits indicate that ABS is in its
active mode. In idle state or with the engine switched
off, safety-relevant functions, e.g., engine
In certain braking situations, the perforated braking effect, braking force boost and steer‐
brake discs can emit functional noises. How‐ ing assistance, are restricted or not available at
ever, this has no effect on the performance and all. There is a risk of an accident. Do not drive
operational reliability of the brake. in idle state or with the engine switched off.◀
Objects in the movement area around Drive long or steep downhill gradients in the
pedals and floor area gear that requires least braking effort. Other‐
wise, the brakes may overheat and reduce
WARNING
brake efficiency.
Objects in the driver's floor area can limit
You can increase the engine's braking effect
the pedal distance or block a depressed pedal.
by shifting down, going all the way to first gear,
There is a risk of an accident. Stow objects in
if needed.
the vehicle such that they are secured and
cannot enter into the driver's floor area. Use
Brake disc corrosion
floor mats that are suitable for the vehicle and
can be safely attached to the floor. Do not use Corrosion on the brake discs and contamina‐
loose floor mats and do not layer several floor tion on the brake pads are increased by the fol‐
mats. Make sure that there is sufficient clear‐ lowing circumstances:
ance for the pedals. Ensure that the floor mats ▷ Low mileage.
are securely fastened again after they were re‐ ▷ Extended periods when the vehicle is not
moved, e.g., for cleaning.◀ used at all.
▷ Infrequent use of the brakes.
Driving in wet conditions
▷ Aggressive, acidic, or alkaline cleaning
When roads are wet, salted, or in heavy rain, agents.
gently press the brake pedal every few miles.
Corrosion buildup on the brake discs will cause
Ensure that this action does not endanger a pulsating effect on the brakes in their re‐
other traffic. sponse - generally this cannot be corrected.
178
Online Edition for Part no. 01 40 2 973 324 - VI/16
Things to remember when driving Driving tips
Driving on racetracks
Higher mechanical and thermal loads during
racetrack operation lead to increased wear.
This wear is not covered by the warranty. The
vehicle is not designed for motorsports com‐
petitive use.
179
Online Edition for Part no. 01 40 2 973 324 - VI/16
Driving tips Loading
Loading
Vehicle features and options NOTE
Fluids in the cargo area can cause dam‐
This chapter describes all standard, country-
age. There is a risk of property damage. Make
specific and optional features offered with the
sure that no fluids leak in the cargo area.◀
series. It also describes features that are not
necessarily available in your vehicle, e. g., due
to the selected options or country versions.
This also applies to safety-related functions Determining the load limit
and systems. When using these functions and
systems, the applicable country provisions 1. Locate the following statement on your ve‐
must be observed. hicle’s placard:
The combined weight of occupants and
cargo should never exceed XXX kg or
Safety information YYY lbs. Otherwise, damage to the vehicle
and unstable driving situations may result.
WARNING
High gross weight can overheat the tires,
damage them, and cause a sudden drop in tire
inflation pressure. There is a risk of an acci‐
dent. Pay attention to the permitted load ca‐
pacity of the tires and never exceed the per‐
mitted gross weight.◀
WARNING
Loose objects or devices with a cable
connection to the vehicle, e.g., mobile phones, 2. Determine the combined weight of the
can be thrown into the vehicle's interior while driver and passengers that will be riding in
driving, e.g., in the event of an accident or dur‐ your vehicle.
ing braking and evasive maneuvers. There is a 3. Subtract the combined weight of the driver
risk of injury. Secure loose objects or devices and passengers from XXX kilograms or
with a cable connection to the vehicle in the YYY pounds.
vehicle's interior.◀
4. The resulting figure equals the available
WARNING amount of cargo and luggage load ca‐
pacity.
Improperly stowed objects can shift and
be thrown into the vehicle's interior, e.g., in the E.g., if the YYY amount equals 1,000 lbs
event of an accident or during braking and eva‐ and there will be four 150 lbs passengers
sive maneuvers. Vehicle occupants can be hit in your vehicle, the amount of available
and injured. There is a risk of injury. Stow and cargo and luggage load capacity is 400 lbs:
secure objects and cargo properly.◀ 1,000 lbs minus 600 lbs = 400 lbs.
5. Determine the combined weight of lug‐
gage and cargo being loaded on the vehi‐
cle. That weight may not safely exceed the
180
Online Edition for Part no. 01 40 2 973 324 - VI/16
Loading Driving tips
available cargo and luggage load capacity Lashing eyes in the cargo
calculated in Step 4.
area
Load
The maximum load is the sum of the weight of Attach load securing aids, such as lashing
the occupants and the cargo. straps, retaining straps, draw straps or cargo
The greater the weight of the occupants, the nets, to the lashing eyes in the cargo area.
less cargo that can be transported.
Floor net
Stowing and securing cargo To secure the cargo the floor net can also be
used.
▷ Cover sharp edges and corners on the
cargo.
▷ Heavy cargo: stow as far forward as possi‐
ble, directly behind and at the bottom of
the rear passenger seat backrests.
▷ Very heavy cargo: when the rear seat is not
occupied, secure each of the outer safety
belts in the opposite buckle.
▷ If necessary, fold down the rear backrests
to stow cargo. Hook the floor net into the fittings in the cargo
▷ Do not stack cargo above the top edge of area floor.
the backrests.
▷ Smaller and lighter cargo: secure with
ratchet straps, the floor net, or draw straps.
Roof-mounted luggage rack
▷ Larger and heavy cargo: secure with cargo
straps. General information
Roof racks are available as special accessories.
181
Online Edition for Part no. 01 40 2 973 324 - VI/16
Driving tips Loading
Safety information ▷ The roof load should not extend past the
loading area.
WARNING
▷ Always place the heaviest pieces on the
When driving with roof load, e.g., with
bottom.
roof-mounted luggage rack, driving safety may
not be ensured in driving-critical situations due ▷ Secure the roof luggage firmly, e.g., using
to the elevated center of gravity. There is a risk ratchet straps.
of accidents or risk of property damage. Do not ▷ Do not let objects project into the opening
deactivate Dynamic Stability Control DSC path of the tailgate.
when driving with roof load.◀ ▷ Drive cautiously and avoid sudden acceler‐
ation and braking maneuvers. Take corners
Securing gently.
Follow the installation instructions of the roof
rack.
Loading
Because roof-mounted luggage racks raise the
vehicle's center of gravity when loaded, they
have a major effect on vehicle handling and
steering response.
Therefore, note the following when loading
and driving:
▷ Do not exceed the approved roof/axle
loads and the approved gross vehicle
weight.
▷ Be sure that adequate clearance is main‐
tained for tilting and opening the glass
sunroof.
▷ Distribute the roof load uniformly.
182
Online Edition for Part no. 01 40 2 973 324 - VI/16
Saving fuel Driving tips
Saving fuel
Vehicle features and options Close the windows and glass
This chapter describes all standard, country- sunroof
specific and optional features offered with the Driving with the glass sunroof and windows
series. It also describes features that are not open results in increased air resistance and
necessarily available in your vehicle, e. g., due thereby reduces the range.
to the selected options or country versions.
This also applies to safety-related functions
and systems. When using these functions and
Tires
systems, the applicable country provisions
must be observed.
General information
Tires can affect fuel consumption in various
ways, e.g., tire size may influence fuel con‐
General information sumption.
The vehicle contains advanced technologies
for the reduction of fuel consumption and Check the tire inflation pressure
emission values. regularly
Fuel consumption depends on a number of dif‐ Check and, if needed, correct the tire inflation
ferent factors. pressure at least twice a month and before
Carrying out certain measures, such as a mod‐ starting on a long trip.
erate driving style and regular maintenance, Low tire inflation pressure increases rolling re‐
can influence fuel consumption and the envi‐ sistance and thus raises fuel consumption and
ronmental impact. tire wear.
183
Online Edition for Part no. 01 40 2 973 324 - VI/16
Driving tips Saving fuel
Switch off the engine during For information on the BMW Maintenance
System, refer to page 225.
longer stops
Switch off the engine during longer stops, e.g.,
at traffic lights, railroad crossings or in traffic ECO PRO
congestion.
Concept
Auto Start/Stop function ECO PRO supports a driving style that saves
The Auto Start/Stop function of the vehicle au‐ on fuel consumption. For this purpose, the en‐
tomatically switches off the engine during a gine control and comfort features, e.g., the cli‐
stop. mate control output, are adjusted.
If the engine is switched off and then restarted Under certain conditions the engine is auto‐
rather than leaving the engine running con‐ matically decoupled from the transmission in
stantly, fuel consumption and emissions are the D selector lever position. The vehicle con‐
reduced. Savings can begin within a few sec‐ tinues traveling with the engine idling to re‐
onds of switching off the engine. duce fuel consumption. Selector lever position
In addition, fuel consumption is also deter‐ D remains engaged.
mined by other factors, such as driving style,
184
Online Edition for Part no. 01 40 2 973 324 - VI/16
Saving fuel Driving tips
Coasting
Driving Dynamics Control To activate coasting:
"Coasting"
Fuel-efficiency can be optimized by disengag‐
Activating ECO PRO ing the engine and coasting with the engine
Press button repeatedly until ECO idling.
PRO is displayed in the instrument This function is only available in ECO PRO
cluster. mode.
Deactivate the function to use the braking ef‐
Configuring ECO PRO fect of the engine when traveling downhill.
185
Online Edition for Part no. 01 40 2 973 324 - VI/16
Driving tips Saving fuel
Display in the instrument cluster Your driving style's efficiency is shown by the
bar's color:
ECO PRO bonus range ▷ Blue display: efficient driving style as long
An adjusted driving style helps as the mark moves within the blue range.
you extend your driving range. ▷ Gray display: adjust driving style, e.g., by
This may be displayed as the backing off the accelerator pedal.
bonus range in the instrument The display switches to blue as soon as all
cluster. conditions for driving with optimized fuel effi‐
The bonus range is shown in the range display. ciency.
The bonus range is automatically reset every
time the vehicle is refueled.
ECO PRO tip, driving tip
The arrow indicates that the driving
style can be adjusted to be more fuel
ECO PRO efficiency display
efficient, e.g., by backing off the accel‐
Display in the instrument cluster erator.
1. "Settings"
2. "Instrument cluster"
Display in the instrument cluster with extended 3. "ECO PRO Info"
range
ECO PRO tip, symbols
An additional symbol and text instructions are
displayed.
Symbol Measure
186
Online Edition for Part no. 01 40 2 973 324 - VI/16
Saving fuel Driving tips
Coasting
Indications on the Control Display
Concept
Displaying EfficientDynamics info
The function helps to conserve fuel.
Information on fuel consumption and technol‐
ogy can be displayed while driving. To do this, under certain conditions the engine
is automatically decoupled from the transmis‐
1. "Vehicle info" sion when selector lever position D is set. The
2. "EfficientDynamics" vehicle continues traveling with the engine
idling to reduce fuel consumption. Selector
Displaying fuel consumption history lever position D remains engaged.
The average fuel consumption can be dis‐ This driving condition is referred to as coast‐
played within an adjustable time frame. ing.
Vertical bars show consumption for the se‐ As soon as you step on the brake or accelera‐
lected time frame. tor pedal, the engine is automatically coupled
Trip interruptions are represented below the again.
bar on the time axis.
General information
"Consumption history"
Coasting is a component of the ECO PRO driv‐
Adjusting the fuel consumption ing mode.
history time frame Coasting is automatically activated when ECO
1. Select the symbol. PRO mode is called via the Driving Dynamics
Control.
2. Adjust the time frame.
The function is available in a certain speed
Resetting fuel consumption history range.
187
Online Edition for Part no. 01 40 2 973 324 - VI/16
Driving tips Saving fuel
▷ The selector lever is in selector lever posi‐ Display in the instrument cluster with
tion D. extended range
▷ Engine and transmission are at operating The mark in the efficiency dis‐
temperature. play below the tachometer is
backlit in blue and is located at
Operation via shift paddles the zero point. The tachometer
approximately indicates idle
Concept speed.
Depending on your vehicle's equipment, the The coasting point indicator is illuminated at
coasting mode can be influenced with the shift the zero point during coasting.
paddles.
Indications on the Control Display
Activating, deactivating coasting via shift The coasting driving condition is displayed in
paddles EfficientDynamics Info while this driving mode
1. Using the shift paddle + shift to the highest is active.
gear. The distance traveled in the coasting driving
2. Press shift paddle + again to enter coasting condition is indicated by a counter. The coun‐
mode. ter is reset prior to every departure.
To deactivate, press shift paddle - .
Display
188
Online Edition for Part no. 01 40 2 973 324 - VI/16
Saving fuel Driving tips
The range of the vehicle can be extended by To assist with an efficient driving style, ECO
an efficient driving style. PRO tips are displayed during driving.
This gain in range is displayed as a bonus Tips about the energy saving driving style,
range in the instrument cluster and on the Conserving fuel, refer to page 183.
Control Display.
Functional requirement
The function is only available in ECO PRO
mode.
189
Online Edition for Part no. 01 40 2 973 324 - VI/16
Online Edition for Part no. 01 40 2 973 324 - VI/16
Mobility
In order to always ensure your mobility, you will
find important information on operating fluids,
wheels and tires, maintenance and Roadside
Assistance in the following.
Refueling
Vehicle features and options Fuel cap
This chapter describes all standard, country-
Opening
specific and optional features offered with the
series. It also describes features that are not 1. Briefly press the rear edge of the fuel filler
necessarily available in your vehicle, e. g., due flap.
to the selected options or country versions.
This also applies to safety-related functions
and systems. When using these functions and
systems, the applicable country provisions
must be observed.
General information
Observe the fuel recommendation, refer to
page 194, prior to refueling. 2. Turn the fuel cap counterclockwise.
Diesel engines
The filler neck is designed for refueling at die‐
sel fuel pumps.
Safety information
NOTE
With a range of less than 30 miles/50 km
it is possible that the engine will no longer have 3. Place the fuel cap in the bracket attached
sufficient fuel. Engine functions are not en‐ to the fuel filler flap.
sured anymore. There is a risk of property
damage. Refuel promptly.◀
Closing
1. Fit the lid and turn it clockwise until you
clearly hear a click.
192
Online Edition for Part no. 01 40 2 973 324 - VI/16
Refueling Mobility
Safety information
NOTE
Fuels are toxic and aggressive. Overfill‐
ing of the fuel tank can damage the fuel sys‐
tem. Painted surfaces may be damaged by
contact with fuel. Escaping fuel can harm the
environment. There is a risk of property dam‐
age. Avoid overfilling.◀
193
Online Edition for Part no. 01 40 2 973 324 - VI/16
Mobility Fuel
Fuel
Vehicle features and options Safety information
194
Online Edition for Part no. 01 40 2 973 324 - VI/16
Fuel Mobility
BMW recommends AKI 89. If the fuel pump nozzle does not fit in the filler
pipe of your BMW, please check to ensure that
If you use gasoline with this minimum AKI Rat‐
you are refueling at a diesel fuel pump that is
ing, the engine may produce knocking sounds
equipped with a diesel fuel pump nozzle.
when starting at high outside temperatures.
This has no effect on the engine life. In the event the Ultra-Low Sulfur Diesel fuel
cannot be fully inserted into the fuel filler neck,
Diesel please contact BMW Roadside Assistance for
instructions on how to add fuel.
Safety information For additional information regarding Roadside
Assistance, refer to the Owner's Manual for
NOTE
Navigation, Entertainment and Communica‐
Do not press the Start/Stop button after tion.
refueling with the wrong fuel. There is a risk of
property damage.
Observe the following for diesel engines:
▷ Use only Ultra-Low Sulfur Diesel. Maxi‐
mum content of biodiesel: 5 %, B5.
▷ Do not use rapeseed methyl ester RME.
▷ Do not use biodiesel above 5 %, B5.
▷ Do not use gasoline.
▷ No diesel additives.
Do not press the Start/Stop button after refuel‐
ing with the wrong fuel. Contact a dealer’s BMW Advanced Diesel
service center or another qualified service cen‐
ter or repair shop.◀ Concept
BMW Advanced Diesel reduces nitrogen ox‐
Low-Sulfur Diesel ides in the diesel emissions by injecting diesel
The engine of your BMW is designed for diesel exhaust fluid into the exhaust system. A chem‐
with low sulfur content: ical reaction takes place inside the catalytic
converter that minimizes nitrogen oxides.
Ultra-Low Sulfur Diesel ASTM D 975-xx.
The vehicle has a tank system that can be refil‐
xx: comply with the current standard in each
led.
case.
195
Online Edition for Part no. 01 40 2 973 324 - VI/16
Mobility Fuel
To be able to start the engine as usual, there Have the diesel exhaust fluid
must be an adequate diesel exhaust fluid. replenished
BMW recommends that diesel exhaust fluid be
Warming up the system added by the dealer’s service center within the
In order to warm the engine up to its operating course of regular maintenance.
temperature after a cold start, the Steptronic In addition it may be necessary to have the
transmission may subsequently shift up to the fluid replenished several times under particular
next higher gear. circumstances, e.g., if the vehicle is driven in a
particularly sporty style or if it is driven at high
Displays in the instrument cluster altitudes.
The diesel exhaust fluid must be replenished
Reserve indication
as soon as the reserve display appears in the
This display in the instrument cluster provides instrument cluster to avoid not being able to
information about the distance that can still be restart the engine.
driven with the current reserve level.
Do not continue driving to the limit of the re‐ Diesel exhaust fluid at low
maining travel distance. It is not possible to re‐ temperatures
start the engine after switching it off. Due to its physical properties, it is possible
▷ Lamp white: refill with diesel that the diesel exhaust fluid may also need to
exhaust fluid at the next op‐ be replenished between regular maintenance
portunity. appointments if it is exposed to temperatures
▷ Lamp yellow: not enough under + 23 ℉/- 5 ℃. In this case, add diesel ex‐
diesel exhaust fluid present. haust fluid only immediately before driving off.
The remaining range is dis‐ At temperatures below + 12 ℉/- 11 ℃, the fill‐
played in the instrument ing level cannot be measured in some cases.
cluster. Immediately refill
with diesel exhaust fluid. Replenishing diesel exhaust fluid
yourself in exceptional cases
Diesel exhaust fluid on minimum
▷ The remaining range is dis‐ General information
played in the instrument You can replenish Diesel exhaust fluid yourself
cluster: add diesel exhaust in exceptional cases, e.g., to get to your sched‐
fluid. The engine will con‐ uled service.
tinue to run as long as it is
not switched off and all Safety information
other operating conditions
WARNING
are satisfied; sufficient fuel,
e.g. Small amounts of ammonia fumes can
escape when opening the diesel exhaust fluid
System malfunction container. Ammonia fumes have a pungent
odor and irritate skin, mucous membranes, and
A Check Control message is displayed when
eyes. There is a risk of injury. Do not inhale es‐
there is a system not working.
caping ammonia fumes. Avoid the contact of
articles of clothing, skin or eyes with diesel ex‐
haust fluid. Do not swallow any diesel exhaust
196
Online Edition for Part no. 01 40 2 973 324 - VI/16
Fuel Mobility
fluid. Keep children away from diesel exhaust Tank for diesel exhaust fluid
fluids.◀
WARNING
Operating materials, e.g., oils, greases,
coolants, fuels, can contain harmful ingredi‐
ents. There is a risk of injuries or danger to life.
Observe the instructions on the containers.
Avoid the contact of articles of clothing, skin or
eyes with operating materials. Do not refill op‐
erating materials into different bottles. Store
operating materials out of reach of children.◀ The fuel cap for diesel exhaust fluids is next to
the fuel cap for the fuel tank.
NOTE
The diesel exhaust fluid ingredients are Adding the diesel exhaust fluid
very aggressive. There is a risk of property
Add the diesel exhaust fluid when the ignition
damage. Avoid contact of diesel exhaust fluid
is switched on.
with surfaces of the vehicle.◀
1. Open the fuel filler flap, refer to page 192.
Suitable diesel exhaust fluid 2. Turn the fuel cap of the diesel exhaust fluid
▷ Recommended: BMW Diesel Exhaust tank counterclockwise and remove.
Fluid. With this bottle and its special 3. Place the bottle on it and turn it as far as it
adapter, diesel exhaust fluid can be replen‐ will go, see arrow.
ished simply and safely.
▷ Alternatively recommended: NOx Diesel
exhaust fluid AUS 32.
Diesel exhaust fluid can be purchased at a
dealer’s service center or another qualified
service center or repair shop.
Refill quantity
When the Reserve display starts, add at least
3 bottles of diesel exhaust fluid. 4. Press the bottle down, see arrow.
This corresponds to approx. 1.5 US gal/6 liters. The vehicle tank will be filled.
197
Online Edition for Part no. 01 40 2 973 324 - VI/16
Mobility Fuel
The tank is full when the fill level in the bot‐ Disposing of bottles
tle no longer changes. It is not possible to
Diesel exhaust fluid bottles can be dis‐
overfill.
posed of at a dealer’s service center or
another qualified service center or re‐
pair shop.
Do not dispose of empty bottles with house‐
hold waste unless this is permitted by local
regulations.
Reserve indication
The Reserve display will still ap‐
5. Pull back the bottle, see arrow, and un‐ pear along with the remaining
screw it. range after refilling.
Engine can be started.
After several minutes of driving,
the Reserve indication goes out.
Filling with an incorrect fluid The indicator goes out after approx. 1 mi‐
nute.
Information 2. Engine can be started.
WARNING
After adding an incorrect fluid, e.g., anti‐
freeze for washer fluid, the system can heat
and ignite. There is a risk of fire and injuries.
Do not add incorrect fluids. Do not start the en‐
gine after adding an incorrect fluid.◀
198
Online Edition for Part no. 01 40 2 973 324 - VI/16
Wheels and tires Mobility
199
Online Edition for Part no. 01 40 2 973 324 - VI/16
Mobility Wheels and tires
200
Online Edition for Part no. 01 40 2 973 324 - VI/16
Wheels and tires Mobility
201
Online Edition for Part no. 01 40 2 973 324 - VI/16
Mobility Wheels and tires
202
Online Edition for Part no. 01 40 2 973 324 - VI/16
Wheels and tires Mobility
330i, 328d, 330i xDrive, 328d xDrive Tire size Pressure specifications
Without high-speed tuning feature in bar/PSI
203
Online Edition for Part no. 01 40 2 973 324 - VI/16
Mobility Wheels and tires
Specifications in
225/45 R 18 91 V 2.7 / 39 3.2 / 46 bar/PSI with cold
M+S A/S RSC tires
225/45 R 18 91 Y
RSC
225/45 R 18 91 Y 2.7 / 39 3.2 / 46
225/50 R 17 94 H RSC
M+S RSC
225/50 R 17 94 H
225/45 R 18 95 V M+S RSC
M+S XL RSC
225/45 R 18 95 V
Front: 2.7 / 39 - M+S XL RSC
225/45 R 18 91 Y
Front: 2.7 / 39 -
RSC
225/45 R 18 91 Y
Rear: 255/40 R 18 - 2.8 / 41 RSC
95 Y RSC
Rear: 255/40 R 18 - 2.8 / 41
Front: 2.7 / 39 - 95 Y RSC
225/40 R 19 89 Y
Front: 2.7 / 39 -
RSC
225/40 R 19 89 Y
Rear: 255/35 R 19 - 3.0 / 44 RSC
92 Y RSC
Rear: 255/35 R 19 - 3.0 / 44
92 Y RSC
204
Online Edition for Part no. 01 40 2 973 324 - VI/16
Wheels and tires Mobility
Tire size Pressure specifications xxxx: manufacturer code for the tire brand
in bar/PSI xxx: tire size and tire design
205
Online Edition for Part no. 01 40 2 973 324 - VI/16
Mobility Wheels and tires
Traction M+S
The traction grades, from highest to lowest, Winter and all-season tires with better cold
are AA, A, B, and C. weather performance than summer tires.
Those grades represent the tire's ability to
stop on wet pavement as measured under
controlled conditions on specified government Tire tread
test surfaces of asphalt and concrete. A tire
marked C may have poor traction performance. Summer tires
The traction grade assigned to this tire is Do not drive with a tire tread depth of less than
based on straight-ahead braking traction tests, 0.12 inches/3 mm.
and does not include acceleration, cornering, There is an increased risk of hydroplaning if
hydroplaning, or peak traction characteristics. the tire tread depth is less than 0.12 in‐
ches/3 mm.
Temperature
The temperature grades are A, the highest, B, Winter tires
and C, representing the tire's resistance to the Do not drive with a tire tread depth of less than
generation of heat and its ability to dissipate 0.16 inches/4 mm.
heat when tested under controlled conditions
Below a tread depth of 0.16 inches/4 mm, tires
on a specified indoor laboratory test wheel.
are less suitable for winter operation.
Sustained high temperature can cause the ma‐
terial of the tire to degenerate and reduce tire
Minimum tread depth
life, and excessive temperature can lead to
sudden tire failure. The grade C corresponds
to a level of performance which all passenger
vehicle tires must meet under the Federal Mo‐
tor Vehicle Safety Standard No. 109. Grades
Band A represent higher levels of performance
on the laboratory test wheel than the minimum
required by law.
WARNING
The temperature grade for this tire is es‐
Wear indicators are distributed around the
tablished for a tire that is properly inflated and
tire's circumference and have the legally re‐
not overloaded. Excessive speed, underinfla‐
quired minimum height of 0.063 in‐
tion, or excessive loading, either separately or
ches/1.6 mm.
in combination, can cause heat buildup and
possible tire failure.◀ They are marked on the side of the tire with
TWI, Tread Wear Indicator.
RSC – Run-flat tires
Run-flat tires, refer to page 208, are labeled
with a circular symbol containing the letters Tire damage
RSC marked on the sidewall.
General information
Inspect your tires regularly for damage, foreign
objects lodged in the tread, and tread wear.
206
Online Edition for Part no. 01 40 2 973 324 - VI/16
Wheels and tires Mobility
Driving over rough or damaged road surfaces, Wheel and tire combination
as well as debris, curbs and other obstacles You can ask the dealer’s service center or an‐
can cause serious damage to wheels, tires and other qualified service center or repair shop
suspension parts. This is more likely to occur about the correct wheel/tire combination and
with low-profile tires, which provide less cush‐ wheel rim versions for the vehicle.
ioning between the wheel and the road. Be
Incorrect wheel and tire combinations impair
careful to avoid road hazards and reduce your
the function of a variety of systems such as
speed, especially if your vehicle is equipped
ABS or DSC.
with low-profile tires.
To maintain good handling and vehicle re‐
Indications of tire damage or other vehicle mal‐
sponse, use only tires with a single tread con‐
functions:
figuration from a single manufacturer.
▷ Unusual vibrations while driving.
Following tire damage, have the original wheel
▷ Unusual handling such as a strong ten‐ and tire combination remounted on the vehicle
dency to pull to the left or right. as soon as possible.
Damage can, e.g., be caused by driving over
WARNING
curbs, road damage, or similar things.
Wheels and tires which are not suitable
Safety information for your vehicle can damage parts of the vehi‐
cle, e.g., due to contact with the body due to
WARNING tolerances despite the same official size rating.
Damaged tires can lose tire inflation There is a risk of an accident. The manufac‐
pressure, which can lead to loss of vehicle turer of your vehicle strongly suggests that you
control. There is a risk of an accident. If tire use wheels and tires that have been recom‐
damage is suspected while driving, immedi‐ mended by the vehicle manufacturer for your
ately reduce speed and stop. Have wheels and vehicle type.◀
tires checked. For this purpose, drive carefully
to the nearest dealer’s service center or an‐ Recommended tire brands
other qualified service center or repair shop.
Have vehicle towed or transported as
needed.◀
WARNING
Damaged tires can lose tire inflation
pressure, which can lead to loss of vehicle
control. There is a risk of an accident. Do not
repair damaged tires, but have them re‐
placed.◀
For each tire size, BMW recommends certain
tire brands. These can be identified by a star
Changing wheels and tires on the tire sidewall.
207
Online Edition for Part no. 01 40 2 973 324 - VI/16
Mobility Wheels and tires
they achieve their full traction potential after a Rotating wheels between axles
break-in time. Different wear patterns can occur on the front
Drive conservatively for the first and rear axles depending on individual driving
200 miles/300 km. conditions. The tires can be rotated between
the axles to achieve even wear. Further infor‐
Retreaded tires mation is available from a dealer’s service cen‐
The manufacturer of your vehicle does not rec‐ ter or another qualified service center or repair
ommend the use of retreaded tires. shop. After rotating, check the tire pressure
and correct, if needed.
WARNING
Rotating the tires between the axes is not per‐
Retreaded tires can have different tire missible on vehicles with different tire sizes or
casing structures. With advanced age the serv‐ rim sizes on the front and rear axles.
ice life can be limited. There is a risk of an acci‐
dent. The manufacturer of your vehicle does Storage
not recommend the use of retreaded tires.◀
Store wheels and tires in a cool, dry place with
as little exposure to light as possible.
Winter tires
Always protect tires against all contact with oil,
Winter tires are recommended for operating on grease and fuels.
winter roads.
Do not exceed the maximum tire inflation pres‐
Although so-called all-season M+S tires pro‐ sure indicated on the side wall of the tire.
vide better winter traction than summer tires,
they do not provide the same level of perform‐
ance as winter tires.
Run-flat tires
Maximum speed of winter tires Label
If the maximum speed of the vehicle is higher
than the permissible speed for the winter tires,
then attach a corresponding information label/
sticker in the field of view. The label is available
from a dealer’s service center or another quali‐
fied service center or repair shop.
With mounted winter tires, observe and adhere
to the permissible maximum speed.
Run-flat tires
RSC label on the tire sidewall.
If you are already using run-flat tires, for your
own safety you should replace them only with The wheels consist of tires that are self-sup‐
the same kind. No spare tire is available in the porting, to a limited degree, and possibly spe‐
case of a flat tire. Further information is availa‐ cial rims.
ble from a dealer’s service center or another The support of the sidewall allows the tire to
qualified service center or repair shop. remain drivable to a restricted degree in the
event of a tire inflation pressure loss.
208
Online Edition for Part no. 01 40 2 973 324 - VI/16
Wheels and tires Mobility
A dealer’s service center will be glad to answer ▷ Contact a dealer’s service center or an‐
additional questions at any time. other qualified service center or repair
shop if the tire cannot be made drivable.
▷ If possible, do not remove foreign bodies
Repairing a flat tire that have penetrated the tire.
▷ Pull the speed limit sticker off the sealant
Safety measures container and apply it to the steering
▷ Park the vehicle as far away as possible wheel.
from passing traffic and on solid ground. ▷ The use of a sealant can damage the TPM
▷ Switch on the hazard warning system. wheel electronics. In this case, have the
electronics checked at the next opportu‐
▷ Secure the vehicle against rolling away by
nity and have them replaced, if needed.
setting the parking brake.
▷ Turn the steering wheel until the front Storage
wheels are in the straight-ahead position
The Mobility System is located under the
and engage the steering wheel lock.
cargo floor panel.
▷ Have all vehicle occupants get out of the
vehicle and ensure that they remain out‐ Sealant container
side the immediate area in a safe place,
such as behind a guardrail.
▷ If necessary, set up a warning triangle at an
appropriate distance.
Mobility System
Concept
With the Mobility System, minor tire damage
▷ Sealant container, arrow 1.
can be sealed temporarily to enable continued
travel. To accomplish this, sealant is pumped ▷ Filling hose, arrow 2.
into the tires, which seals the damage from the Observe use-by date on the sealant container.
inside.
The compressor can be used to check the tire
inflation pressure.
General information
▷ Follow the instructions on using the Mobi‐
lity System found on the compressor and
sealant container.
209
Online Edition for Part no. 01 40 2 973 324 - VI/16
Mobility Wheels and tires
1 On/off switch
2 Holder for sealant container
3 Reduce inflation pressure 3. Attach the connection hose to the connec‐
tor of the sealing container, ensuring that it
4 Inflation pressure dial
engages audibly.
5 Compressor
6 Connector/cable for socket
7 Connection hose — stowed in the bottom
of the compressor
210
Online Edition for Part no. 01 40 2 973 324 - VI/16
Wheels and tires Mobility
5. Screw the connection hose onto the tire exhaust pipe free and ensure sufficient ventila‐
valve of the nonworking wheel. tion.◀
NOTE
The compressor can overheat during ex‐
tended operation. There is a risk of property
damage. Do not run the compressor for more
than 10 min.◀
6. With the compressor switched off, insert While the tire is being filled with sealant, the
the plug into a power socket inside the ve‐ tire inflation pressure may sporadically reach
hicle. approx. 5 bar. Do not switch off the compres‐
sor at this point.
If a tire inflation pressure of 2 bar is not
reached:
211
Online Edition for Part no. 01 40 2 973 324 - VI/16
Mobility Wheels and tires
Do not exceed a speed of 50 mph/80 km/h. ▷ Increase pressure: with the ignition
If possible, do not drive at speeds less than turned on or the engine running, switch
12 mph/20 km/h. on the compressor.
▷ To reduce the pressure: press the but‐
Correcting the tire inflation pressure ton on the compressor.
1. Stop at a suitable location.
Continuing the trip
2. Screw the connection hose onto the tire
valve stem. Do not exceed the maximum permissible
speed of 50 mph/80 km/h.
Reinitialize the Flat Tire Monitor.
Reinitialize the Tire Pressure Monitor.
Replace the nonworking tire and the sealant
container of the Mobility System as soon as
possible.
Snow chains
3. Attach the connection hose directly to the
compressor. Fine-link snow chains
The manufacturer of your vehicle recommends
use of fine-link snow chains. Certain types of
fine-link snow chains have been tested by the
manufacturer of the vehicle and recommended
as road-safe and suitable.
Information regarding suitable snow chains is
available from a dealer’s service center or an‐
other qualified service center or repair shop.
212
Online Edition for Part no. 01 40 2 973 324 - VI/16
Wheels and tires Mobility
Follow the snow chain manufacturer's instruc‐ served, there is a risk of the raised vehicle fall‐
tions. ing, if the vehicle jack tilts over. There is a risk
Make sure that the snow chains are always of injuries or danger to life. If the vehicle is
sufficiently tight. Re-tighten as needed ac‐ raised, do not lie under the vehicle and do not
cording to the snow chain manufacturer's in‐ start the engine.◀
structions.
WARNING
Do not initialize the Flat Tire Monitor after
The vehicle jack is optimized for lifting
mounting snow chains, as doing so may result
the vehicle and for the jacking points on the
in incorrect readings.
vehicle only. There is a risk of injury. Do not lift
Do not initialize the Tire Pressure Monitor after any other vehicle or cargo using the vehicle
mounting snow chains, as doing so may result jack.◀
in incorrect readings.
When driving with snow chains, briefly activate WARNING
Dynamic Traction Control, if needed. If the vehicle jack is not inserted into the
designated jacking point, damage to the vehi‐
Maximum speed with snow chains cle may occur while cranking the vehicle up, or
Do not exceed a speed of 30 mph/50 km/h the vehicle jack can slip away. There is a risk of
when using snow chains. injury or risk of property damage. Make sure
that the vehicle jack is inserted into the jacking
point next to the wheel house while cranking
the vehicle up.◀
Changing wheels/tires
General information Securing the vehicle against rolling
When using run-flat tires or tire sealants, a tire
General information
does not always need to be changed immedi‐
ately in the event of pressure loss due to a flat The vehicle manufacturer recommends to ad‐
tire. ditionally secure the vehicle against rolling
away when changing a wheel.
If needed, the tools for changing wheels are
available as accessories from a dealer’s service
On a level surface
center or another qualified service center or re‐
pair shop.
Safety information
WARNING
On soft or slippery ground, e.g., snow,
ice, tiles, etc., the vehicle jack can slip away.
There is a risk of injury. If possible, change the
tire/wheel on a flat, solid and slip-resistant sur‐
face.◀
Place chocks or other suitable objects, for ex‐
WARNING ample a rock, in front of and behind the wheel
that is diagonally opposite to the wheel that
The vehicle jack is only provided for
you wish to change.
short-term lifting of the vehicle for wheel
changes. Even if all safety measures are ob‐
213
Online Edition for Part no. 01 40 2 973 324 - VI/16
Mobility Wheels and tires
If a wheel needs to be changed on a slight The jacking points for the vehicle jack are lo‐
down-hill grade, place wheel chocks or other cated at the positions shown.
suitable objects, e.g. a stone, under the wheels
of the front and rear axle.
Jacking up the vehicle
1. Hold the vehicle jack with one hand, ar‐
Preparing the vehicle row 1, and grasp the crank, arrow 2, with
▷ Change the wheel as far away as possible the other hand.
from passing traffic.
WARNING
▷ Park the vehicle on solid, non-slip and level
Hands and fingers can be jammed
ground.
when using the vehicle jack. There is a risk
▷ Switch on the hazard warning system. of injury. Comply with the described hand
▷ Set the parking brake.
▷ Engage a gear or selector lever position P.
▷ As soon as permitted by the traffic flow,
have all vehicle occupants get out of the
vehicle and ensure that they remain out‐
side the immediate area in a safe place,
such as behind a guardrail.
▷ Depending on the equipment version, get
tools and the emergency wheel from the
vehicle.
▷ If necessary, set up a warning triangle or
portable hazard warning lamp at an appro‐
priate distance.
▷ Do not place wood blocks or similar items
under the vehicle jack; otherwise, it cannot
reach its carrying capacity because of the
restricted height.
▷ Secure the vehicle additionally against roll‐
ing.
▷ Loosen the lug bolts a half turn.
214
Online Edition for Part no. 01 40 2 973 324 - VI/16
Wheels and tires Mobility
position and do not change this position 4. Make sure that the vehicle jack foot is ex‐
while using the vehicle jack.◀ tended vertically.
2. Insert the vehicle jack into the rectangular 5. Make sure that the vehicle jack foot stands
recess of the jacking point closest to the vertically and perpendicularly beneath the
wheel to be changed. jacking point after extending the vehicle
jack.
Wheel mounting
Mount a maximum of one emergency wheel.
215
Online Edition for Part no. 01 40 2 973 324 - VI/16
Mobility Wheels and tires
216
Online Edition for Part no. 01 40 2 973 324 - VI/16
Engine compartment Mobility
Engine compartment
Vehicle features and options to the selected options or country versions.
This also applies to safety-related functions
This chapter describes all standard, country- and systems. When using these functions and
specific and optional features offered with the systems, the applicable country provisions
series. It also describes features that are not must be observed.
necessarily available in your vehicle, e. g., due
217
Online Edition for Part no. 01 40 2 973 324 - VI/16
Mobility Engine compartment
WARNING
Opening the hood
Improperly executed work in the engine
1. Pull lever, arrow 1.
compartment can damage vehicle compo‐
nents and impair vehicle functions. There is a Hood is unlocked.
risk of personal and property damage. The
manufacturer of your vehicle recommends
that, in the effort to avoid such risks, work in
the engine compartment be performed by a
dealer’s service center or another qualified
service center or repair shop.◀
WARNING
The engine compartment accommo‐
dates moving components. Certain compo‐
nents in the engine compartment can also 2. After the lever is released, pull the lever
move with the vehicle switched off, e.g., the ra‐ again, arrow 2.
diator fan. There is a risk of injury. Do not reach Hood can be opened.
into the area of moving parts. Keep articles of
clothing and hair away from moving parts.◀ Indicator/warning lights
When the hood is unlocked, a Check Control
WARNING
message is displayed.
There are protruding parts, e.g., locking
hook, on the inside of the hood. There is a risk Closing the hood
of injury. If the hood is open, pay attention to
protruding parts and keep these areas clear.◀
WARNING
An incorrectly locked hood can open
while driving and restrict visibility. There is a
risk of an accident. Stop immediately and cor‐
rectly close the hood.◀
WARNING
Body parts can be jammed when open‐ Let the hood drop from a height of approx.
ing and closing the hood. There is a risk of in‐ 16 inches/40 cm and push down on it to lock it
jury. Make sure that the area of movement of fully.
the hood is clear during opening and closing.◀ The hood must engage on both sides.
NOTE
Folded-away wipers can be jammed
when the hood is opened. There is a risk of
property damage. Make sure that the wipers
218
Online Edition for Part no. 01 40 2 973 324 - VI/16
Engine oil Mobility
Engine oil
Vehicle features and options Electronic oil measurement
This chapter describes all standard, country-
Status display
specific and optional features offered with the
series. It also describes features that are not
Concept
necessarily available in your vehicle, e. g., due
to the selected options or country versions. The engine oil level is monitored electronically
This also applies to safety-related functions while driving and shown on the Control Dis‐
and systems. When using these functions and play.
systems, the applicable country provisions If the engine oil level reaches the minimum
must be observed. level, a Check Control message is displayed.
Requirements
General information A current measured value is available after ap‐
prox. 30 minutes of driving. During a shorter
The engine oil consumption is dependent on
trip, the status of the last, sufficiently long trip
the driving style and driving conditions.
is displayed.
The engine oil consumption can increase in
With frequent short-distance trips, regularly
the following situations, for example:
perform a detailed measurement.
▷ Sporty driving style.
▷ Break-in of the engine. Displaying the engine oil level
▷ Idling of the engine. Via iDrive:
▷ With use of engine oil types that are classi‐ 1. "Vehicle info"
fied as not suitable.
2. "Vehicle status"
Therefore, regularly check the engine oil level
3. "Engine oil level"
after refueling.
The engine oil level is displayed.
Depending on its engine, the vehicle is equip‐
ped with electronic oil measurement or oil
measuring is done with a dipstick. Engine oil level display messages
Different messages appear on the display de‐
The electronic oil measurement has two meas‐
pending on the engine oil level. Pay attention
uring principles:
to these messages.
▷ Status display.
If the engine oil level is too low within the next
▷ Detailed measurement. 125 miles/200 km, add engine oil.
A red indicator lamp indicates too high
engine oil pressure.
NOTE
An engine oil level that is too low causes
engine damage. There is a risk of property
damage. Immediately add engine oil.◀
219
Online Edition for Part no. 01 40 2 973 324 - VI/16
Mobility Engine oil
Take care not to add too much engine oil. 3. "Measure engine oil level"
NOTE 4. "Start measurement"
Too much engine oil can damage the en‐ The engine oil level is checked and displayed
gine or the catalytic converter. There is a risk via a scale.
of property damage. Do not add too much en‐ Time: approx. 1 minute.
gine oil. When too much engine oil is added,
have oil level corrected by a dealer’s service
center or another qualified service center or re‐ Adding engine oil
pair shop.◀
General information
Detailed measurement Only add engine oil when the message is dis‐
played in the instrument cluster. The quantity
Concept to be added is indicated in the message dis‐
In the detailed measurement the engine oil played in the instrument cluster.
level is checked when the vehicle is stationary, Switch off the ignition and safely park the vehi‐
and displayed via a scale. cle before engine oil is added.
If the engine oil level reaches the minimum Take care not to add too much engine oil.
level, a Check Control message is displayed.
During the measurement, the idle speed is in‐ Safety information
creased somewhat.
WARNING
220
Online Edition for Part no. 01 40 2 973 324 - VI/16
Engine oil Mobility
center or another qualified service center or re‐ Suitable engine oil types
pair shop.◀ You can add engine oils that meet the follow‐
ing oil rating standards:
Overview
Gasoline engine
The oil filler neck is located in the engine com‐
partment, refer to page 217. BMW Longlife-01 FE.
Diesel engine
221
Online Edition for Part no. 01 40 2 973 324 - VI/16
Mobility Engine oil
222
Online Edition for Part no. 01 40 2 973 324 - VI/16
Coolant Mobility
Coolant
Vehicle features and options Coolant level
This chapter describes all standard, country-
General information
specific and optional features offered with the
series. It also describes features that are not The coolant level is indicted using minimum
necessarily available in your vehicle, e. g., due and maximum markings. Depending on the
to the selected options or country versions. coolant reservoir, the minimum and maximum
This also applies to safety-related functions markings are located at different locations.
and systems. When using these functions and
systems, the applicable country provisions Overview
must be observed. Depending on the engine installation, the cool‐
ant reservoir is located on the right side or the
left side of the engine compartment.
General information
Checking the coolant level on the side
Not all commercially available additives are markings
suitable for the vehicle. Information about suit‐
1. Let the engine cool.
able additives is available from a dealer’s serv‐
ice center or another qualified service center or 2. The coolant level is correct if it lies be‐
repair shop. tween the minimum and maximum marks.
The marks are on the side of the coolant
reservoir.
Safety information
Symbol Meaning
WARNING
With the engine hot and the cooling sys‐ Maximum
tem open, coolant can escape and lead to
Minimum
scalding. There is a risk of injury. Only open
the cooling system with the engine cooled
down.◀
WARNING
Additives are harmful and incorrect addi‐
tives can damage the engine. There is a risk of
injury and risk of property damage. Do not al‐
low additives to come into contact with skin,
eyes or articles of clothing. Use suitable addi‐
tives only.◀
223
Online Edition for Part no. 01 40 2 973 324 - VI/16
Mobility Coolant
Disposal
Comply with the relevant environmen‐
tal protection regulations when dispos‐
ing of coolant and coolant additives.
224
Online Edition for Part no. 01 40 2 973 324 - VI/16
Maintenance Mobility
Maintenance
Vehicle features and options Service data in the remote control
Information on the required maintenance is
This chapter describes all standard, country-
continuously stored in the remote control. The
specific and optional features offered with the
dealer’s service center can read this data out
series. It also describes features that are not
and suggest a maintenance scope for the vehi‐
necessarily available in your vehicle, e. g., due
cle.
to the selected options or country versions.
This also applies to safety-related functions Therefore, hand the service advisor the remote
and systems. When using these functions and control with which the vehicle was driven most
systems, the applicable country provisions recently.
must be observed.
Storage periods
Storage periods during which the vehicle bat‐
BMW maintenance system tery was disconnected are not taken into ac‐
count.
The maintenance system indicates required
maintenance measures, and thereby provides If this occurs, have a dealer's service center or
support in maintaining road safety and the op‐ another qualified service center or repair shop
erational reliability of the vehicle. update the time-dependent maintenance pro‐
cedures, such as checking brake fluid and, if
In some cases, scopes and intervals may vary necessary, changing the engine oil and the mi‐
according to the country-specific version. Re‐ crofilter/activated-charcoal filter.
placement work, spare parts, fuels and lubri‐
cants, and wear materials are calculated sepa‐
rately. Further information is available from a
dealer’s service center or another qualified
Service and Warranty
service center or repair shop. Information Booklet for US
models and Warranty and
Service Guide Booklet for
Condition Based Service Canadian models
CBS Please consult your Service and Warranty In‐
Sensors and special algorithms take into ac‐ formation Booklet for US models and Warranty
count the driving conditions of the vehicle. and Service Guide Booklet for Canadian mod‐
Based on this, Condition Based Service recog‐ els for additional information on service re‐
nizes the maintenance requirements. quirements.
The system makes it possible to adapt the The manufacturer of your vehicle recommends
amount of maintenance corresponding to your that maintenance and repair be performed by a
user profile. dealer’s service center or another qualified
Information on service requirements can be service center or repair shop. Records of regu‐
displayed on the Control Display. lar maintenance and repair work should be re‐
tained.
225
Online Edition for Part no. 01 40 2 973 324 - VI/16
Mobility Maintenance
Socket for OBD Onboard ▷ The warning lamp flashes under certain
circumstances:
Diagnosis
This indicates that there is excessive mis‐
Safety information firing in the engine.
Position
Emissions
▷ The warning lamp lights up:
Emissions are deteriorating. Have
the vehicle checked as soon as
possible.
226
Online Edition for Part no. 01 40 2 973 324 - VI/16
Replacing components Mobility
Replacing components
Vehicle features and options Replacing the wiper blades
1. To change the wiper blades, fold up, refer
This chapter describes all standard, country-
to page 74, the wiper arms.
specific and optional features offered with the
series. It also describes features that are not 2. Fold up and hold the wiper arm firmly.
necessarily available in your vehicle, e. g., due 3. Squeeze the retainer spring, arrow 1, and
to the selected options or country versions. fold up the wiper blade, arrow 2.
This also applies to safety-related functions
and systems. When using these functions and
systems, the applicable country provisions
must be observed.
227
Online Edition for Part no. 01 40 2 973 324 - VI/16
Mobility Replacing components
NOTE
Headlight glass
Dirty bulbs have a reduced service life.
Condensation can form on the inside of the ex‐ There is a risk of property damage. Do not hold
ternal lights in cool or humid weather. When new bulbs with your bare hands. Use a clean
driving with the lights switched on, the con‐ cloth or something similar, or hold the bulb by
densation evaporates after a short time. The its base.◀
headlight glass does not need to be changed.
If despite driving with the lights switched on,
Light-emitting diodes (LEDs)
increasing humidity forms, e.g., water droplets
in the lamp, the manufacturer of your vehicle WARNING
recommends having it checked by a dealer’s Too intensive brightness can irritate or
service center or another qualified service cen‐ damage the retina of the eye. There is a risk of
ter or repair shop. injury. Do not look directly into the headlights
or other light sources. Do not remove the LED
Headlight setting covers.◀
The headlight adjustments can be affected by
changing lights and bulbs. After the headlight
adjustment was changed, have it checked and,
if necessary, corrected by a dealer’s service
center or another qualified service center or re‐
pair shop.
228
Online Edition for Part no. 01 40 2 973 324 - VI/16
Replacing components Mobility
229
Online Edition for Part no. 01 40 2 973 324 - VI/16
Mobility Replacing components
2. Turn the bulb holder counterclockwise, ar‐ 1. Unscrew the bulb holder, arrow 1, and
row 1, and remove, arrow 2. carefully remove it, arrow 2.
3. Remove the bulb from the bulb holder. 2. Remove the bulb from the bulb holder.
4. Install the new bulb and bulb holder in re‐ 3. To insert the bulb and bulb holder, proceed
verse order of removal. in reverse order of removal. Make sure you
hear the bulb holder engage.
5. Close the headlight housing with the lid.
Make sure that the lid audibly engages. 4. Close the headlight housing with the lid.
230
Online Edition for Part no. 01 40 2 973 324 - VI/16
Replacing components Mobility
1 Turn signal
2. Pull off the bulb connector, arrow 1.
2 Inside brake lamp
Turn the bulb, arrow 2.
3 Reversing lamp
Left side of vehicle: turn clockwise.
4 Tail lamps
Right side of vehicle: turn counterclock‐
wise. 5 Outside brake lamp
General information
3. Insert the new bulb, connect the connector Observe the safety information, refer to
and screw on the wheel house panel. page 228.
Reversing lights: 21-watt bulb, H21W.
LED front fog lights All lights in the tailgate are made using LED
These front fog lights are made using LED technology. In the case of a malfunction, con‐
technology. In the case of a malfunction, con‐ tact a dealer’s service center or another quali‐
tact a dealer’s service center or another quali‐ fied service center or repair shop.
fied service center or repair shop.
Accessing the lights
Turn signal in exterior mirror 1. If needed, remove warning triangle, refer to
The turn signals in the exterior mirrors feature page 236, and bracket with the screw‐
LED technology. In the case of a malfunction,
231
Online Edition for Part no. 01 40 2 973 324 - VI/16
Mobility Replacing components
driver from the onboard vehicle tool kit, re‐ Vehicle battery
fer to page 227.
2. Use the screwdriver from the onboard ve‐ Maintenance
hicle tool kit to loosen and completely re‐ The battery is maintenance-free.
move the screws on the trim.
The added amount of acid is sufficient for the
service life of the battery.
More information about the battery can be re‐
quested from a dealer’s service center or an‐
other qualified service center or repair shop.
Battery replacement
NOTE
Vehicle batteries that are not compatible
3. Carefully loosen the trim from the tailgate, can damage vehicle systems and impair vehi‐
starting at the edge and working toward cle functions. There is a risk of personal and
the area around the recessed grips. Make property damage. Only vehicle batteries that
sure that the trim does not become stuck. are compatible with your vehicle type should
be installed in your vehicle. Information on
4. Carefully swing out the trim.
compatible vehicle batteries is available at your
dealer’s service center.◀
Changing reversing lights
1. Pull the bulb holder out. After a battery replacement, the manufacturer
of your vehicle recommends that the vehicle
battery be registered on the vehicle by a deal‐
er’s service center or another qualified service
center or repair shop to ensure that all comfort
features are fully available and that any Check
Control messages of these comfort features
are no longer displayed.
232
Online Edition for Part no. 01 40 2 973 324 - VI/16
Replacing components Mobility
233
Online Edition for Part no. 01 40 2 973 324 - VI/16
Mobility Replacing components
234
Online Edition for Part no. 01 40 2 973 324 - VI/16
Breakdown assistance Mobility
Breakdown assistance
Vehicle features and options Overview
235
Online Edition for Part no. 01 40 2 973 324 - VI/16
Mobility Breakdown assistance
Roadside Assistance
The Roadside Assistance phone number can
be viewed via iDrive or a connection to Road‐
side Assistance can be established directly.
The first-aid kit is located in the cargo area in a
storage compartment.
Jump-starting
General information
If the battery is discharged, the engine can be
started using the battery of another vehicle
236
Online Edition for Part no. 01 40 2 973 324 - VI/16
Breakdown assistance Mobility
Safety information
DANGER
Contact with live components can lead to
an electric shock. There is a risk of injuries or
danger to life. Do not touch any components
that are under voltage.◀
The starting aid terminal in the engine com‐
To prevent personal injury or damage to both partment acts as the battery's positive termi‐
vehicles, adhere strictly to the following proce‐ nal.
dure. Open the cover of the starting aid terminal.
Preparation
NOTE
In the case of body contact between the
two vehicles, a short circuit can occur during
jump-starting. There is a risk of property dam‐
age. Make sure that no body contact occurs.◀
237
Online Edition for Part no. 01 40 2 973 324 - VI/16
Mobility Breakdown assistance
corresponding engine or body ground of ▷ Make sure that the ignition is switched on;
the vehicle to be started. otherwise, the low beams, tail lamps, turn
signals, and wipers may be unavailable.
Starting the engine ▷ Do not tow the vehicle with the rear axle
Never use spray fluids to start the engine. tilted, as the front wheels could turn.
1. Start the engine of the assisting vehicle ▷ When the engine is stopped, there is no
and let it run for several minutes at an in‐ power assist. Consequently, more force
creased idle speed. needs to be applied when braking and
steering.
If the vehicle to be started has a diesel en‐
gine: let the engine of the assisting vehicle ▷ Larger steering wheel movements are re‐
run for approx. 10 minutes. quired.
2. Start the engine of the vehicle that is to be ▷ The towing vehicle must not be lighter
started in the usual way. than the vehicle being towed; otherwise,
it will not be possible to control the vehi‐
If the first starting attempt is not success‐
cle's response.
ful, wait a few minutes before making an‐
other attempt in order to allow the dis‐ ▷ Do not exceed a towing speed of
charged battery to recharge. 30 mph/50 km/h.
3. Let both engines run for several minutes. ▷ Do not exceed a towing distance of
30 miles/50 km.
4. Disconnect the jumper cables in the re‐
verse order.
Tow truck
Check the battery and recharge, if needed.
With rear-wheel drive
238
Online Edition for Part no. 01 40 2 973 324 - VI/16
Breakdown assistance Mobility
The vehicle should only be transported on a The vehicle should only be transported on a
loading platform. loading platform.
NOTE NOTE
The vehicle can be damaged when tow‐ When lifting the vehicle by the tow fitting
ing the vehicle with a single lifted axle. There is or body and chassis parts; damage can occur
a risk of property damage. The vehicle should on vehicle parts. There is a risk of property
only be transported on a loading platform.◀ damage. Lift vehicle using suitable means.◀
NOTE Use tow fitting located in the front only for po‐
sitioning the vehicle.
When lifting the vehicle by the tow fitting
or body and chassis parts; damage can occur
on vehicle parts. There is a risk of property
Pushing the vehicle
damage. Lift vehicle using suitable means.◀ To remove a disabled vehicle from the danger
area, it can be pushed for a short distance. The
vehicle can only be pushed in selector lever
Steptronic transmission: transporting
position N.
the vehicle
In order to ensure that the vehicle can roll, pro‐
General information ceed as follows:
The vehicle is not permitted to be towed. 1. Switch on the ignition.
2. Depress brake pedal.
Safety information
3. Engage selector lever position N.
NOTE
If there is a malfunction, it may happen that
The vehicle can be damaged when tow‐ you cannot change the selector lever position.
ing the vehicle with a single lifted axle. There is
Electronically unlock the transmission lock, re‐
a risk of property damage. The vehicle should
fer to page 79, if needed.
only be transported on a loading platform.◀
Towing other vehicles
General information
Switch on the hazard warning system, depend‐
ing on local regulations.
239
Online Edition for Part no. 01 40 2 973 324 - VI/16
Mobility Breakdown assistance
Safety information
WARNING
If the approved gross vehicle weight of
the towing vehicle is lighter than the vehicle to
be towed, the tow fitting can tear off or it will
not be possible to control the vehicle's re‐
sponse. There is a risk of an accident! Make
sure that the gross vehicle weight of the tow‐
ing vehicle is heavier than the vehicle to be The screw-in tow fitting should always be car‐
towed.◀ ried in the vehicle.
240
Online Edition for Part no. 01 40 2 973 324 - VI/16
Breakdown assistance Mobility
Tow-starting
Steptronic transmission
Do not tow-start the vehicle.
Tow-starting the engine is not possible due to
the Steptronic transmission.
Have the cause of the starting problems fixed.
Manual transmission
If possible, do not tow-start the vehicle but
start the engine by jump-starting, refer to
page 236. If the vehicle is equipped with a cat‐
alytic converter, only tow-start while the en‐
gine is cold.
241
Online Edition for Part no. 01 40 2 973 324 - VI/16
Mobility Care
Care
Vehicle features and options ▷ Minimum distance from glass sunroof:
31.5 in/80 cm.
This chapter describes all standard, country-
specific and optional features offered with the Automatic vehicle washes
series. It also describes features that are not
necessarily available in your vehicle, e. g., due Safety information
to the selected options or country versions.
This also applies to safety-related functions NOTE
and systems. When using these functions and Improper use of automatic vehicle
systems, the applicable country provisions washes can cause damage to the vehicle.
must be observed. There is a risk of property damage. Information
the following instructions:
▷ Give preference to cloth vehicle washes or
Vehicle washes those that use soft brushes in order to
avoid paint damage.
General information ▷ Avoid vehicle washes with guide rails
Regularly remove foreign objects such as higher than 4 in/10 cm to avoid damage to
leaves in the area below the windshield when the chassis.
the hood is raised. ▷ Observe the tire width of the guide rail to
Wash your vehicle frequently, particularly in avoid damage to tires and rims.
winter. Intense soiling and road salt can dam‐ ▷ Fold in exterior mirrors to avoid damage to
age the vehicle. the exterior mirrors.
▷ Deactivate rain sensor, if necessary, to
Steam blaster and high-pressure
avoid damage to the wiper system.◀
washer
If necessary, switch off automatic PDC activa‐
Safety information tion on obstacle detection, e.g., in vehicle
washes, to reduce PDC false alarms.
NOTE
When cleaning with high-pressure wash‐ Before driving into a vehicle wash
ers, components can be damaged due to the
In order to ensure that the vehicle can roll in a
pressure or temperatures being too high.
vehicle wash, take the following steps:
There is a risk of property damage. Maintain
sufficient distance and do not spray too long Manual transmission:
continuously. Follow the operating instructions 1. Drive into the vehicle wash.
for the high-pressure washer.◀
2. Shift to neutral.
3. Switch the engine off.
Distances and temperature
Steptronic transmission:
▷ Maximum temperature: 140 ℉/60 ℃.
▷ Minimum distance from sensors, cameras, 1. Drive into the vehicle wash.
seals: 12 inches/30 cm. 2. Engage selector lever position N.
3. Switch the engine off.
242
Online Edition for Part no. 01 40 2 973 324 - VI/16
Care Mobility
In this way, the ignition remains switched ▷ Soak areas that have been dirtied, e.g.,
on, and a Check-Control message is dis‐ from insects, with shampoo and wash off
played. with water.
NOTE ▷ Thaw ice with de-icing spray; do not use an
ice scraper.
Selector lever position P is automati‐
cally engaged when the ignition is
switched off. There is a risk of property
After washing the vehicle
damage. Do not switch drive-ready state After washing the vehicle, apply the brakes
off in vehicle washes.◀ briefly to dry them; otherwise, braking action
can be reduced. The heat generated during
Some vehicle washes do not permit persons in braking dries brake discs and brake pads and
the vehicle. The vehicle cannot be locked from protects them against corrosion.
the outside when in selector lever position N. A
Completely remove all residues on the win‐
signal sounds when an attempt is made to lock
dows, to minimize loss of visibility due to
the vehicle.
smearing and to reduce wiper noises and
wiper blade wear.
Exiting a vehicle wash
To start the engine with manual transmission:
1. Make sure that the vehicle key is in the ve‐ Vehicle care
hicle.
2. Press on the clutch pedal. Vehicle care products
3. Press the Start/Stop button. General information
To start the engine with Steptronic transmis‐ BMW recommends using vehicle care and
sion: cleaning products from BMW.
1. Make sure that the vehicle key is in the ve‐
hicle. Safety information
2. Depress the brake pedal. WARNING
3. Press the Start/Stop button. Cleansers can contain substances that
Pressing the Start/Stop button without step‐ are dangerous and harmful to your health.
ping on the brake turns the ignition off. There is a risk of injury. When cleaning the in‐
terior, open the doors or windows. Only use
Selector lever position products intended for cleaning vehicles. Fol‐
low the instructions on the container.◀
Selector lever position P is engaged automati‐
cally:
Vehicle paint
▷ When the ignition is switched off.
Regular care contributes to driving safety and
▷ After approx. 15 minutes.
value retention. Environmental influences in
areas with elevated air pollution or natural con‐
Headlamps taminants, such as tree resin or pollen can af‐
▷ Do not rub dry and do not use abrasive or fect the vehicle's paintwork. Tailor the fre‐
acidic cleansers. quency and extent of your vehicle care to
these influences.
243
Online Edition for Part no. 01 40 2 973 324 - VI/16
Mobility Care
Aggressive substances such as spilled fuel, oil, Caring for special components
grease or bird droppings, must be removed im‐
mediately to prevent the finish from being al‐ Light-alloy wheels
tered or discolored. When cleaning the vehicle, use only neutral
wheel cleaners having a pH value from 5 to 9.
Leather care Do not use abrasive cleaning agents or steam
Remove dust from the leather often, using a jets above 140 ℉/60 ℃. Follow the manufac‐
cloth or vacuum cleaner. turer's instructions.
Otherwise, particles of dust and road grime Aggressive, acidic or alkaline cleaning agents
chafe in pores and folds, and lead to increased can destroy the protective layer of adjacent
wear and premature degradation of the leather components, such as the brake disk.
surface. After cleaning, apply the brakes briefly to dry
To guard against discoloration, such as from them. The heat generated during braking dries
clothing, clean leather and provide leather care brake discs and brake pads and protects them
roughly every two months. against corrosion.
Clean light-colored leather more frequently be‐
cause soiling on such surfaces is substantially Chrome surfaces
more visible. Carefully clean components such as the radia‐
Use leather care products; otherwise, dirt and tor grille or door handles with an ample supply
grease will gradually break down the protective of water, possibly with shampoo added, partic‐
layer of the leather surface. ularly when they have been exposed to road
salt.
Suitable care products are available from a
dealer’s service center or another qualified
Rubber components
service center or repair shop.
Environmental influences can cause surface
Upholstery material care soiling of rubber parts and a loss of gloss. Use
only water and suitable cleaning agents for
General information cleaning. The manufacturer of your vehicle
recommends original BMW care products.
Vacuum regularly with a vacuum cleaner.
Treat especially worn rubber parts with rubber
If upholstery is very dirty, e.g., with beverage
care agents at regular intervals. When cleaning
stains, use a soft sponge or microfiber cloth
rubber seals, do not use any silicon-containing
with a suitable interior cleaner.
vehicle care products in order to avoid damage
Clean the upholstery down to the seams using or noises.
large sweeping motions. Avoid rubbing the
material vigorously. Fine wood parts
Clean fine wood facing and fine wood compo‐
Safety information nents only with a moist rag. Then dry with a
NOTE soft cloth.
Open Velcro® fasteners on articles of
clothing can damage the seat covers. There is
a risk of property damage. Ensure that any Vel‐
cro® fasteners are closed.◀
244
Online Edition for Part no. 01 40 2 973 324 - VI/16
Care Mobility
Plastic components floor mats that are suitable for the vehicle and
can be safely attached to the floor. Do not use
NOTE
loose floor mats and do not layer several floor
Cleansers that contain alcohol or sol‐ mats. Make sure that there is sufficient clear‐
vents, such as lacquer thinners, heavy-duty ance for the pedals. Ensure that the floor mats
grease removers, fuel, or such, can damage are securely fastened again after they were re‐
plastic parts. There is a risk of property dam‐ moved, e.g., for cleaning.◀
age. Clean with a microfiber cloth. Dampen
cloth lightly with water.◀ Floor mats can be removed from the vehicle's
interior for cleaning.
Plastic components are e.g.:
If the floor carpets are very dirty, clean with a
▷ Imitation leather surfaces. microfiber cloth and water or a textile cleaner.
▷ Roofliner. To prevent matting of the carpet, rub back and
▷ Lamp lenses. forth in the direction of travel only.
245
Online Edition for Part no. 01 40 2 973 324 - VI/16
Mobility Care
246
Online Edition for Part no. 01 40 2 973 324 - VI/16
Care Mobility
247
Online Edition for Part no. 01 40 2 973 324 - VI/16
Online Edition for Part no. 01 40 2 973 324 - VI/16
Reference
This chapter contains the technical data and an
index that will quickly take you to the information
you need.
Technical data
Vehicle features and options to the selected options or country versions.
This also applies to safety-related functions
This chapter describes all standard, country- and systems. When using these functions and
specific and optional features offered with the systems, the applicable country provisions
series. It also describes features that are not must be observed.
necessarily available in your vehicle, e. g., due
General information
The technical data and specifications in this cle or can be obtained from a dealer’s service
Owner's Manual are used as guidance values. center or another qualified service center or re‐
The vehicle-specific data can deviate from this, pair shop.
e.g., due to the selected special equipment, The information in the vehicle documents al‐
country version or country-specific measure‐ ways has priority over the information in this
ment method. Detailed values can be found in Owner's Manual.
the approval documents, on labels on the vehi‐
Dimensions
The dimensions can vary depending on the or spoiler. The heights can deviate, e.g., due to
model version, equipment or country-specific the selected special equipment, tires, load and
measurement method. chassis version.
The specified heights do not take into account
attached parts, e.g., a roof antenna, roof racks
250
Online Edition for Part no. 01 40 2 973 324 - VI/16
Technical data Reference
Weights
320i
320i xDrive
330i
251
Online Edition for Part no. 01 40 2 973 324 - VI/16
Reference Technical data
330i
330i xDrive
340i
252
Online Edition for Part no. 01 40 2 973 324 - VI/16
Technical data Reference
340i xDrive
328d
328d xDrive
253
Online Edition for Part no. 01 40 2 973 324 - VI/16
Reference Technical data
Capacities
US gal/liters Notes
Diesel 15.0/57.0
254
Online Edition for Part no. 01 40 2 973 324 - VI/16
Appendix Reference
Appendix
Any updates to the Owner's Manual of the ve‐
hicle are listed here.
255
Online Edition for Part no. 01 40 2 973 324 - VI/16
Reference Everything from A to Z
Everything from A to Z
Index
A All-season tires, see Winter Automatic transmission, see
tires 208 Steptronic transmission 76
ABS, Antilock Brake Sys‐ All-wheel-drive 127 Automatic vehicle wash 242
tem 125 Alternative oil types 221 AUTO program, automatic cli‐
ACC, Active Cruise Control Ambient light 101 mate control 156
with Stop&Go function 131 Antifreeze, washer fluid 74 AUTO program, climate con‐
Acceleration Assistant, see Antilock Brake System, trol 154
Launch Control 79 ABS 125 AUTO program, intensity 157
Accessories and parts 8 Anti-slip control, see Auto Start/Stop function 68
Activated-charcoal filter 158 DSC 125 Auto washing 242
Activation times, parked-car App, BMW Driver’s Guide 6 AUX-IN port, general informa‐
ventilation 159 Approach control warning tion 166
Active Blind Spot Detec‐ with City light braking func‐ Average fuel consumption 92
tion 122 tion 113 Average speed 92
Active Cruise Control with Approved axle load 251 Axle loads, weights 251
Stop&Go function, Arrival time 92
ACC 131 Ashtray 164 B
Adaptive brake lights, see Assistance, Roadside Assis‐
Brake force display 124 tance 236 Backrest curvature, see Lum‐
Adaptive Light Control 99 Assistance when driving bar support 53
Additives, oil 221 off 129 Backrest, width 53
Adjustments, seats/head re‐ Assist system information, on Band-aids, see First-aid
straints 51 Control Display 95 kit 236
After washing vehicle 243 Attentiveness assistant 124 Battery replacement, vehicle
Airbags 102 AUTO intensity 157 battery 232
Airbags, indicator/warning Automatic climate con‐ Battery replacement, vehicle
light 103 trol 153 remote control 36
Air circulation, see Recircu‐ Automatic climate control Battery, vehicle 232
lated-air mode 154, 157 with enhanced features 155 Being towed, see Tow-start‐
Air, dehumidifying, see Cool‐ Automatic cruise control with ing and towing 238
ing function 154, 156 Stop&Go function 131 Belts, safety belts 54
Air distribution, Automatic Curb Monitor 60 Beverage holder, cup
manual 155, 157 Automatic deactivation, holder 171
Air flow, air conditioner 154 Front-seat passenger air‐ Biodiesel 195
Air flow, automatic climate bags 104 Blinds, sun protection 48
control 157 Automatic headlamp con‐ Blocking, power window 47
Air pressure, tires 199 trol 98 BMW Advanced Diesel 195
Air vents, see Ventilation 158 Automatic locking 44 BMW Assist 6
Alarm system 45 Automatic recirculated-air BMW Driver’s Guide app 6
Alarm, unintentional 46 control 157 BMW Homepage 6
BMW Internet page 6
256
Online Edition for Part no. 01 40 2 973 324 - VI/16
Everything from A to Z Reference
257
Online Edition for Part no. 01 40 2 973 324 - VI/16
Reference Everything from A to Z
Control systems, driving sta‐ Dehumidifying, air 154, 156 Driving instructions, break-
bility 125 Deleting personal data 24 in 176
Convenient opening with the Deletion of personal data 24 Driving instructions, ECO
remote control 35 Destination distance 92 PRO 186
Coolant 223 Diesel exhaust fluid, at low Driving mode 127
Coolant level 223 temperatures 196 Driving notes, general 177
Coolant temperature 86 Diesel exhaust fluid, having Driving on racetracks 179
Cooling function 154, 156 refilled 196 Driving stability control sys‐
Cooling, maximum 156 Diesel exhaust fluid, on mini‐ tems 125
Cooling system 223 mum 196 Driving style analysis 189
Cornering light 99 Diesel exhaust fluid, replen‐ Driving tips 177
Corrosion on brake discs 178 ishing yourself 196 DSC Dynamic Stability Con‐
Cosmetic mirror 164 Diesel fuel 195 trol 125
Courtesy lamps during un‐ Diesel particulate filter 177 DTC Dynamic Traction Con‐
locking 35 Digital clock 87 trol 126
Courtesy lamps with the vehi‐ Digital compass 162 Dynamic Damping Con‐
cle locked 35 Dimensions 250 trol 127
Cruise control 136 Dimmable exterior mirrors 60 Dynamic Stability Control
Cruise control, active with Dimmable interior mirror 61 DSC 125
Stop&Go function 131 Direction indicator, see Turn Dynamic Traction Control
Cruise control with distance signals 71 DTC 126
control, see active cruise Display, electronic, instru‐
control, ACC 131 ment cluster 81 E
Cruise control without dis‐ Display in windshield 95
tance control, see cruise Display lighting, see Instru‐ ECO PRO 184
control 136 ment lighting 101 ECO PRO, bonus range 186
Cruising range 87 Displays, care 245 ECO PRO display 184
Cup holders 171 Disposal, coolant 224 ECO PRO driving mode 184
Current fuel consumption 87 Disposal, vehicle battery 233 ECO PRO driving style analy‐
Distance control, see sis 189
D PDC 139 ECO PRO mode 184
Distance to destination 92 ECO PRO tips 186
Damage, tires 206 Divided screen view, split Efficiency display, ECO
Damping control, dy‐ screen 23 PRO 186
namic 127 Door key, see Remote con‐ EfficientDynamics info 187
Data, technical 250 trol 37 Electronic displays, instru‐
Date 94 Drive-off assistant 129 ment cluster 81
Date display 87 Drive-off assistant, see Electronic oil measure‐
Daytime running lights 99 DSC 125 ment 219
Daytime running lights, bulb Driver assistance, see Intelli‐ Electronic Stability Program
replacement 229 gent Safety 112 ESP, see DSC 125
Defrosting, see defrosting the Driving Assistant, see Intelli‐ Emergency release, fuel filler
windows 155 gent Safety 112 flap 193
Defrosting, see Windows, de‐ Driving Dynamics Con‐ Emergency Request 235
frosting 157 trol 127 Emergency service, see
Defrosting the windows 155 Roadside Assistance 236
258
Online Edition for Part no. 01 40 2 973 324 - VI/16
Everything from A to Z Reference
Emergency unlocking, tail‐ External temperature warn‐ Fuel filler flap 192
gate 42 ing 86 Fuel gauge 86
Emergency unlocking, trans‐ Fuel quality 194
mission lock 79 F Fuel recommendation 194
Energy Control 87 Fuel, tank capacity 254
Energy recovery 87 Failure message, see Check Functions and controls in the
Engine, automatic Start/Stop Control 82 center console 16
function 68 False alarm, see Unintentional Functions and controls in the
Engine, automatic switch- alarm 46 cockpit 14
off 68 Fan, see Air flow 154, 157 Fuse 233
Engine compartment 217 Filler neck for engine oil 220
Engine compartment, work‐ Fine wood, care 244 G
ing in 218 First-aid kit 236
Engine coolant 223 Flat tire, changing Garage door opener, see Uni‐
Engine idling when driving, wheels 213 versal Integrated Remote
coasting 187 Flat Tire Monitor FTM 110 Control 160
Engine oil 219 Flat tire, repairing 209 Gasoline 194
Engine oil, adding 220 Flat tire, Tire Pressure Moni‐ Gear change, Steptronic
Engine oil additives 221 tor TPM 105 transmission 76
Engine oil change 222 Flat tire, warning Gear shift indicator 89
Engine oil filler neck 220 lamp 107, 110 General driving notes 177
Engine oil temperature 86 Flooding 177 Glare shield 164
Engine oil types, alterna‐ Floor carpet, care 245 Glass sunroof, electric 48
tive 221 Floor mats, care 245 Glass sunroof, initialize the
Engine oil types, suitable 221 Fogged up windows 155 system 50
Engine start, jump-start‐ Fold-away position, wiper 74 Glove compartment 169
ing 236 Fold down the rear seat back‐ GPS location, vehicle posi‐
Engine start, see Starting the rest, see Though-loading tion 95
engine 67 system 167 Gross vehicle weight, ap‐
Engine stop 68 Foot brake 178 proved 251
Engine temperature 86 Front airbags 102
Entering a vehicle wash 242 Front fog lamps, halogen, H
Equipment, interior 160 bulb replacement 230
Error displays, see Check Front fog lamps, , LED, bulb Handbrake, see parking
Control 82 replacement 231 brake 70
ESP Electronic Stability Pro‐ Front fog lights 100 Hand-held transmitter, alter‐
gram, see DSC 125 Front lights 229 nating code 161
Exchanging wheels/tires 207 Front-seat passenger airbags, Hazard warning flashers 235
Exhaust system 177 automatic deactivation 104 Head airbags 102
Exiting a vehicle wash 242 Front-seat passenger airbags, Headlamp control, auto‐
Exterior mirror, automatic indicator lamp 105 matic 98
dimming feature 60 FTM Flat Tire Monitor 110 Headlamp courtesy delay fea‐
Exterior mirrors 59 Fuel 194 ture 98
External start 236 Fuel cap 192 Headlamps, care 243
External temperature dis‐ Fuel consumption, see Aver‐ Headlight flasher 72
play 86 age fuel consumption 92
259
Online Edition for Part no. 01 40 2 973 324 - VI/16
Reference Everything from A to Z
Headlight flasher, bulb re‐ Indication of a flat Interval display, service re‐
placement 230 tire 107, 110 quirements 88
Headlight glass 228 Indicator and alarm lamps, Interval mode 73
Headlights 229 see Check Control 82 In the vicinity of the roof‐
Head restraints 51 Indicator lamp, see Check liner 17
Head restraints, front 56 Control 82
Head restraints, rear 57 Individual air distribu‐ J
Head-up Display 95 tion 155, 157
Head-up Display, care 245 Individual settings, see Per‐ Jacking points for the vehicle
Heavy cargo, stowing sonal Profile 42 jack 214
cargo 181 Inflation pressure, tires 199 Joystick, Steptronic transmis‐
Height, vehicle 250 Inflation pressure warning sion 76
High-beam Assistant 99 FTM, tires 110 Jump-starting 236
High beams 72 Info display, see On-Board
High beams/low beams, see computer 91 K
High-beam Assistant 99 Information 6
High beams, bulb replace‐ Initialize, Tire Pressure Moni‐ Key/remote control 37
ment 230 tor TPM 106 Keyless Go, see Comfort Ac‐
Hills 178 Initializing, Flat Tire Monitor cess 38
Hill start assistant, see Drive- FTM 110 Key Memory, see Personal
off assistant 129 Instrument cluster 81 Profile 42
Holder for beverages 171 Instrument cluster, electronic Key, see Remote control 34
Homepage 6 displays 81 Kickdown, Steptronic trans‐
Hood 218 Instrument lighting 101 mission 76
Horn 14 Integrated key 37 Knee airbag 103
Hotel function, tailgate 42 Integrated Owner's Manual in
Hot exhaust system 177 the vehicle 29 L
HUD Head-up Display 95 Intelligent emergency
Hydroplaning 177 call 235 Label on recommended
Intelligent Safety 112 tires 207
I Intended use 7 Lamp in the exterior mirror,
Intensity, AUTO pro‐ see Active Blind Spot De‐
Ice warning, see External gram 157 tection 122
temperature warning 86 Interior equipment 160 Lamp replacement 227
Icy roads, see External tem‐ Interior lights 101 Lamp replacement, front 229
perature warning 86 Interior lights during unlock‐ Lamp replacement, rear 231
Identification marks, tires 205 ing 35 Lane departure warning 120
Identification number, see Ve‐ Interior lights with the vehicle Lane threshold, warning 120
hicle identification num‐ locked 35 Language on Control Dis‐
ber 10 Interior mirror, automatic dim‐ play 94
iDrive 18 ming feature 61 LATCH child restraint fixing
Ignition key, see Remote con‐ Interior mirror, compass 162 system 64
trol 37 Interior mirror, manually dim‐ Launch Control 79
Ignition off 66 mable 60 Leather, care 244
Ignition on 66 Interior motion sensor 46 LED light, bulb replace‐
Internet page 6 ment 230
260
Online Edition for Part no. 01 40 2 973 324 - VI/16
Everything from A to Z Reference
261
Online Edition for Part no. 01 40 2 973 324 - VI/16
Reference Everything from A to Z
262
Online Edition for Part no. 01 40 2 973 324 - VI/16
Everything from A to Z Reference
Safety locks, doors, and win‐ Side airbags 102 Steering wheel heating 61
dows 65 Side View 145 Steptronic Sport transmis‐
Safety switch, windows 47 Signaling, horn 14 sion, see Steptronic trans‐
Safety systems, airbags 102 Signals when unlocking 44 mission 76
Saving fuel 183 Sitting safely 51 Steptronic transmission 76
Screen, see Control Dis‐ Size 250 Stopping the engine 68
play 18 Slide/tilt glass roof 48 Storage compartment in the
Screwdriver, see Onboard ve‐ Smallest turning radius 250 rear 171
hicle tool kit 227 SMS SMS text message, Storage compartments 169
Sealant 209 supplementary 85 Storage compartments, loca‐
Seat and mirror memory 58 Snow chains 212 tions 169
Seat belts, see Safety Socket 165 Storage, tires 208
belts 54 Socket, OBD Onboard Diag‐ Storing the vehicle 245
Seat heating, front 54 nostics 226 Stowing and securing
Seat heating, rear 54 Soot particulate filter 177 cargo 181
Seating position for chil‐ SOS button 235 Suitable engine oil types 221
dren 62 Spare fuse 233 Summer tires, tread 206
Seats 51 Speed, average 92 Sun visor 164
Securing cargo 181 Speed Limit Info 89 Supplementary SMS SMS
Selection list in instrument Speed Limit Info, com‐ text message 85
cluster 90 puter 92 Surround View 143
Selector lever, Steptronic Speed limits, display 89 Switch for driving dynam‐
transmission 76 Speed warning 93 ics 127
Sensors, care 245 Split screen 23 Switch, see Cockpit 14
Service and warranty 8 SPORT+ - program, driving Symbols 6
Service requirements, Condi‐ dynamics 128 Symbols in the status field 23
tion Based Service Sport displays, torque dis‐
CBS 225 play, performance dis‐ T
Service requirements, dis‐ play 93
play 88 SPORT program, driving dy‐ Tachometer 86
Service, Roadside Assis‐ namics 128 Tailgate closing 41
tance 236 Sport program, transmis‐ Tailgate, emergency unlock‐
Services, ConnectedDrive 6 sion 77 ing 42
Servotronic 130 Sport steering, variable 127 Tailgate, hotel function 42
SET button, see Active Stability control systems 125 Tailgate opening 41
Cruise Control, ACC 131 Standard equipment 7 Tailgate, opening with no-
SET button, see Cruise con‐ Start/stop, automatic func‐ touch activation 40
trol 136 tion 68 Tailgate via remote con‐
Settings, locking/unlock‐ Start/Stop button 66 trol 35
ing 44 Starting the engine 67 Tail lamps 231
Settings on Control Dis‐ Status control display, Technical changes, see Own
play 93 tires 106 Safety 7
Settings, storing for seat, mir‐ Status information, iDrive 23 Technical data 250
ror 58 Status of Owner's Manual 7 Telephone 6
Shift paddles on the steering Steering assistance 130 Temperature, automatic cli‐
wheel 78 Steering wheel, adjusting 61 mate control 154, 156
263
Online Edition for Part no. 01 40 2 973 324 - VI/16
Reference Everything from A to Z
Temperature display for ex‐ Transporting children Vehicle key, see Remote con‐
ternal temperature 86 safely 62 trol 37
Temperature, engine oil 86 Tread, tires 206 Vehicle paint 243
Terminal, starting aid 237 Triple turn signal activa‐ Vehicle position, GPS loca‐
Theft alarm system, see tion 71 tion 95
Alarm system 45 Trip odometer 86 Vehicle storage 245
Thigh support 53 Trip onboard computer 92 Vehicle wash 242
Through-loading system 167 Trip recorder, see Trip odom‐ Vehicle, washing 242
Tilt alarm sensor 46 eter 86 Ventilation 158
Time 93 Turning circle 250 Ventilation, see Parked-car
Time of arrival 92 Turning radius lines, rearview ventilation 158
Tire damage 206 camera 144 VIN, see Vehicle identification
Tire identification marks 205 Turn signals, operation 71 number 10
Tire inflation pressure 199 Voice activation system 26
Tire inflation pressure moni‐ U
tor, see FTM 110 W
Tire Pressure Monitor Unintentional alarm 46
TPM 105 Units of measurement 94 Warning and indicator lamps,
Tire repair kit, see Mobility Universal remote control 160 see Check Control 82
System 209 Unlock button, Steptronic Warning displays, see Check
Tires, changing 207 transmission 77 Control 82
Tire sealant, see Mobility Unlocking, settings 44 Warning lamp in the exterior
System 209 Updates made after the edito‐ mirror, see Active Blind Spot
Tires, everything on wheels rial deadline 7 Detection 122
and tires 199 Upholstery care 244 Warning messages, see
Tires, run-flat tires 208 USB interface, general infor‐ Check Control 82
Tire tread 206 mation 166 Warning triangle 236
Tone 6 USB port, see USB inter‐ Warranty 7
Tool 227 face 166 Washer fluid 74
Top View 146 Use, intended 7 Washer nozzles, wind‐
Total vehicle weight 251 shield 74
Touchpad 21 V Washer system 72
Towing 238 Washing the vehicle 242
Tow-starting 238 Vanity mirror 164 Water on roads 177
TPM Tire Pressure Moni‐ Variable sport steering 127 Weights 251
tor 105 Vehicle battery 232 Welcome lights 98
Traction control 126 Vehicle battery, replac‐ Welcome lights during un‐
TRACTION, driving dynam‐ ing 232 locking 35
ics 126 Vehicle, break-in 176 Wheel base, vehicle 250
Transmission lock, electronic Vehicle care 243 Wheel cleaner 244
unlocking 79 Vehicle care products 243 Wheels, changing 207
Transmission, manual trans‐ Vehicle features and op‐ Wheels, everything on wheels
mission 75 tions 7 and tires 199
Transmission, Steptronic Vehicle identification num‐ Wheels, Flat Tire Monitor
transmission 76 ber 10 FTM 110
Vehicle jack 214
264
Online Edition for Part no. 01 40 2 973 324 - VI/16
Everything from A to Z Reference
X
xDrive 127
265
Online Edition for Part no. 01 40 2 973 324 - VI/16
More about BMW
The Ultimate
bmwusa.com Driving Machine®
01 40 2 973 324 ue
*BL2973324008*
Online Edition for Part no. 01 40 2 973 324 - VI/16