Professional Documents
Culture Documents
S600 / S132
S130
Laser Particle
Portable Compressed
Counter Air
Purity Analyzer
www.suto-itec.com 1/5
Benefits
Output Signals
Applications
Particle free compressed air is not an easy task to be achieved. • 4 ... 20 mA analog
Monitoring is a must in many industries and applications to output
avoid contamination in products and health risks for humans. S130/S132
• Modbus/RTU and
• Medical air Portable and stationary Modbus/TCP
Solution (TCP only with
• Pharmaceuticals
Display version)
• Breathable air for rescue workers and divers
• Food and beverage • Alarm Relay
• Semiconductor fabs S130
Laser Particle Counter
Read instruction
! Manual before use
C B A
Environmental
Contaminants Filter Filter Filter
Particle Configuration
Measuring range S130: 0.3 < d ≤ 5.0 μm Others Device comes pre-configured
S132: 0.1 < d ≤ 5.0 μm Configuration can be done via
on-screen touch
Measuring channels S130:
CH1: 0.3 < d ≤ 0.5 μm Display
CH2: 0.5 < d ≤ 1.0 μm Integrated 5” color touch screen
CH3: 1.0 < d ≤ 5.0 μm
CH4: 5.0 μm < d (configurable) Data Logger
S132: Storage 30 million measurement values
CH1: 0.1 < d ≤ 0.5 μm (optional)
CH2: 0.5 < d ≤ 1.0 μm Miscellaneous
CH3: 1.0 < d ≤ 5.0 μm
Electrical connection 3X M12
CH4: 5.0 μm < d (configurable)
Protection class IP65
Counting efficiency S130:
according ISO 21501-4 30 ... 70 % of d > 0.3 um, Process connection 6 mm quick connect (pressurized
90 ... 110 % of d >= 0.45 um version), barb connection (ambient
S132: version)
30 ... 70 % of d > 0.1 um, Material PC, Al alloy
90 ... 110 % of d >= 0.3 um Weight S130: 1.9 kg
Principle of measurement Laser detection S132: 3.2 kg
Sensor LED-laser Dimensions S130: 271 x 205 x 91 mm
S132: 300 x 240 x 120 mm
Consumption
Selectable units cn/m³, cn/ft³ Operating conditions
Medium Compressed air and gases free of
corrosive, aggressive, caustic and
flammable constituents
Signal / Interface & Supply
Flow rate 2.83 l/min
Analog output Sample rate One sample per minute
Signal 4 ... 20 mA (2-wire) Medium quality ISO 8573-4
Alarm Switch output, normally open, Medium temperature 0 ... +40 °C
max. 40 VDC, 200 mA
Medium humidity < 90 %, no condensation
Fieldbus Operating pressure 0.3 ... 1.5 MPa
Protocol Modbus/RTU, , Modbus/TCP (with
Ambient temperature +10 ... +40 °C
Display version)
Ambient humidity 0 ... 90 % rH
Supply
Storage temperature -10 ... +50 °C
Voltage supply 24 VDC / 10 W (without Display)
24 VDC / 20 W (with Display) Storage humidity < 90 % with no condensation
Current consumption 420 mA (without Display) Transport temperature -30 ... +70 °C Without display
840 mA (with Display) -10 ... +60 °C with display
Data interface
USB USB Micro with OTG support
Accessories
www.suto-itec.com sales@suto-itec.com