Product Description: ELECTROL is a Uninhibited EHVI premium grade Insulating Oil for Transformers and Switchgears.
Specification: ELECTROL conforms to IS: 335:1993 and latest revision thereof.
Typical Properties Specification
Test Description Test Method Typical Values & Characteristics Limits Appearance A representative sample Transparent clear, Transparent clear, of the oil shall be colourless, odourless colourless, odourless examined in a 100 mm liquid free from liquid free from thick layer 27 oC suspended impurities suspended impurities Density @ 29.5 oC (Max) IS 1448 [P: 16]: 1977 0.89 0.83 Kinematic Viscosity @ 27 oC , cSt (Max) IS 1448 [P: 25]: 1976 27 16 Interfacial Tension @ 27 oC, N/m (Min) IS 6104:1971 0.04 0.046 Flash Point, oC (PMCC)(Min) IS 1448[P: 21]: 1970 140 160 Pour point, oC (Max) IS 1448 [P: 10]: 1970 -6 -27 Neutralization value, IS 1448 [P: 2]: 1967 a) Total Acidity, mg KOH/g (Max) 0.03 Nil b) Inorganic Acidity, ng KOH/g (Max) Nil Nil Corrosive Sulphur As per IS : 335, Annex B Non-corrosive Non-Corrosive Electric Strength (Break Down voltage) IS 6792:1972 a) New Unfiltered oil, kV (Min) 30 50 b) After filtration, kV (Min) 60 70 Dielectric Dissipation factor (tan ) at 90 IS 6262:1971 0.002 0.00030 o C (Max) Specific resistance (Resistivity) IS 6103: 1971 a) At 90 oC, ohm-cm (Min) 35X1012 250 X1012 b) At 27 oC, ohm-cm (Min) 1500 X1012 3000 X1012 Oxidation stability As Per IS: 335 a) Neutralization value after oxidation, Annex C 0.4 0.034 mg KOH/g (Max) b) Total Sludge after oxidation, % by 0.1 Nil weight (Max) Ageing Characteristics after accelerated IS 12177: 1987 ageing (Open Beaker method with Method A copper catalyst) a) Specific resistance (Resistivity) IS 6103: 1971 i) At 90 oC, ohm-cm (Min) 0.2 X1012 2 X1012 ii) At 27 oC, ohm-cm (Min) 2.5 X1012 50 X1012 b) Dielectric Dissipation factor (Tan ) IS 6262: 1971 0.20 0.0072 @ 90 oC (Max) c) Total Acidity, mg KOH/g (Max) IS 1448 [P: 2]: 1967 0.05 Nil d) Total Sludge, % by weight (Max) Annex A of IS 12177 0.05 Nil Presence of Oxidation Inhibitor IS 13631:1992 Not present Not present Water Content, ppm (Max) IS 13567: 1992 50 25 SK Value As per IS: 335 Under consideration ---- Annexure D The above data is indicative of recent average Values only. Minor variations within above limits, which do not affect product performance or quality, may be expected in manufacture. Specific requirements can be custom-made on request. Product Form & : ELECTROL is offered in 210 Ltr.net drums and in bulk in Flexi bags or ISO Tank Packaging Containers
156, Poonamallee High Road Ambawadi, Kalachowki Kilpauk, Chennai 600 010 Cotton Green, Mumbai 400 033 Fax: +91-44-42288900 - 912 Ph: (91)-22-24714961-64 E-mail: exports@rajgrp.com E-mail: pamumbai@rajgrp.com Website www.rajgrp.com Note: The information contained herein is, to our best knowledge, true and accurate, but all recommendations or suggestions are made without guarantee, since the conditions of use are beyond our control. There is no implied warranty of merchantability or fitness for purpose of the product or products described herein. In submitting this information, no liability is assumed or license or other rights express or implied given with respect to any existing or pending patent, patent applications or trademarks. The observance of all legal regulations and patents is the responsibility of the user. . 2003/11 / ELECTROL Page 1 of This document was created with Win2PDF available at http://www.daneprairie.com. The unregistered version of Win2PDF is for evaluation or non-commercial use only.