Professional Documents
Culture Documents
1
VALVE CHANGER Shaded area indicates a change Rev 12-12
Normally, the gas meter valve provides the primary The Mueller valve changer – a Mueller NO-BLO
shut-off point on the gas service line. If this valve System exclusive – which includes plugging units and
needs to be replaced for any reason, there is often no safety clamps, can be used on most straightway and
other convenient shut-off point upstream of the valve. round way meter valves in sizes ranging from 1/2"
The Mueller NO-BLO Valve Changer provides a safe, through 2" if the valve has an FIP outlet and the port
effective and easy to use means for stopping gas flow through the valve will permit the passage of the valve
upstream of the meter valve allowing the valve to be changer’s plugging unit.
replaced. It also allows the MIP threads on the riser to
be refurbished, if necessary.
®®
NO-BLO
H-17010 VALVE CHANGER 13.3
REPLACEMENT PARTS Shaded area indicates a change Rev 12-12
*Nominal
EXTENDED LENGTH PLUGGING UNIT 13.5
REPLACEMENT PARTS Shaded area indicates a change REV. 6-10
Set Screw
Pipe Clamp Asy Thumb Thumb Screw
Screw Set Screw
Pivot Sleeve
Hex Nut Pivot Sleeve
*Nominal
H-17013 VALVE CHANGER 13.9
REPLACEMENT PARTS Shaded area indicates a change Rev 12-12
*Nominal