Professional Documents
Culture Documents
Features:
Description:
There are 8 optically isolated inputs. It accepts 10-24 V dc input signal. It is read
high when 24V signal is present at the input. There are 8 open collector type of digital
output, which can drive Lamps (12V or 24V) or relays (12V or 24V). If 12V external supply
is used to drive relays then connect +12V line and its ground to +12V and DGND line
respectively to our card. Connect one end of the lamp to 12V supply and other end to any
of DO-01 to DO-08. There is an on board power supply which accepts 10V to 30V dc input
and converts it into 5 V for micro-controller supply. Digital input/output modules contain
digital inputs/outputs for the automation system. Digital sensors, switches, 2-wire proximity
switches and actuators can be connected to the automation system via these modules.
Output modules are suitable for connection of solenoid valves, contactors and lamps
ETH-DIO8| Millennium Technologies
Specifications:
Ordering Information:
Model ETH-DIO8
Description 8 Ch. Digital Inputs/Outputs with Ethernet