Professional Documents
Culture Documents
Topology
EXTERNAL EXTERNAL
IP : NAT IP : NAT
PC 2 (WINDOWS 10)
IP ADDRESS : 192.168.11.2 IP ADDRESS : 192.168.12.2
MASK : 255.255.255.0 MASK : 255.255.255.0
GATEWAY : 192.168.11.1 GATEWAY : 192.168.12.1
Addressing Table
Objectives
Step 1 : Configure IP address on all devices according to table and topology diagram.
Step 1 : Install Remote Access on DCRoute and Route1. Select Remote Access from Server Roles.
Step 2 : Select Routing from Role Services.
Step 1 : Open the Getting Started Wizard for DirectAccess and VPN (RAS).
Step 2 : Choose Deploy VPN only.
Step 3 : Configure the VPN by right-click on DCRouter1(local) and select configure option.
Step 10 : Choose Static Route Interface and fill the information according to the diagram. Click OK to
enable the static route.
Step 11 : Repeat step 1 until 10 to configure static route on Router2. Fill in the information required
according to picture below.
Part 5 : NAT
Step 1 : Go to PC1. Open up Command Prompt and issue command route print to verify routing
table.
Step 4 : Verify internet connectivity by issuing ping command and ping google public DNS.