Professional Documents
Culture Documents
The purpose of this service bulletin is to announce the A new hydraulic lifter, P/N 153752K, has been
availability of new valve train parts to reduce wear. released, replacing P/N 153752G. The new lifter has
been revised internally to prevent leak down and has
A new fixed lifter screw in the cylinder head valve train,
an improved finish in the ball socket to reduce wear.
P/N 169080W, replaces P/N 169080S. The new screw
can be identified by the letter “W” stamped on one of The push rod assembly has been revised to include
the screw head sides (see Figure 1). the new hydraulic lifter. See Table 1 for push rod
assembly part numbers.
The new screw has a revised radius, surface finish,
and hardness to improve wear characteristics. Table 1. Push Rod Assembly Part Numbers
MODEL P/N
Standard VHP D153754D
IDENTIFICATION MARK Series Four A153754T
FIXED LIFTER SCREW The new hydraulic lifter in the push rod assembly can
P/N 169080W
be identified by the P/N on the side of the lifter (see
Figure 2). G
P/N LOCATED ON
SIDE OF LIFTER
WAUKESHA ENGINE
DRESSER, INC.
Page 1 of 1
WAUKESHA, WI 53188-4999